aboutsummaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)Author
2012-03-19[reltool] Always return warnings as flat stringsSiri Hansen
OTP-9794
2012-03-19[reltool] Fix type spec and doc for app() and mod()Siri Hansen
OTP-9792 Also correct documentation of reltool:install/2: first argument is RelName, not Server.
2012-03-19[reltool] Move tables out of common recordSiri Hansen
OTP-9794 This is a minor change, in order to keep tables private to reltool_server.
2012-03-19[reltool] Display warnings continously in GUISiri Hansen
OTP-9967 All active warnings are now displayed in a specific warning list at the bottom of the sys windows. Warnings do no longer cause popup dialogs during configuration. The reason for this is to avoid the same warning to pop up many times. This would happen since each configuration change now causes a fresh reading of the file system - and thus each warning would be detected each time the configuration was changed. reltool_manual_gui_SUITE is updated to test the new functionality.
2012-03-19[reltool] Cleanup test codeSiri Hansen
OTP-9794 Remove some unused code from reltool test.
2012-03-19[reltool] Unset ERL_FLAGS when running escript from reltool_server_SUITESiri Hansen
OTP-9794 Some escript tests in reltool_server_SUITE failed if ERL_FLAGS was set to enable smp. The reason is that the test expected smp_support to be false, since the argument "-smp disable" is stated in the %%!-line of the escript. However, ERL_FLAGS will override the arguments in the escript so the result could not be truested.
2012-03-19[reltool] Improve error handlingSiri Hansen
OTP-9794 Stopping configuration (throw/catch) at first error instead of continuing through all steps and then returning the error at the end. Start of reltool_server will no longer succeed if the configuration causes an error. reltool:get_status can only return {error,Reason} in the case where the reltool_server has terminated. In all other cases it will return {ok,Warnings}. Bug fix in this commit: * warnings are no longer duplicated in pop-up or return from reltool_server
2012-03-19[reltool] Fix rollback and undoSiri Hansen
OTP-9794 Backup old configuration before starting re-configuration so rollback is possible if configuration fails. Store last configuration including derivates so undo does no longer need to refresh and analyse everything from disk.
2012-03-19[reltool] Link together escript with inlined applicationSiri Hansen
OTP-9968 Make sure that inlined applications in an escript is included/excluded as the escript itself, and forbid explicit configuration of the inlined application.
2012-03-19[reltool] Fix badmatch when starting GUISiri Hansen
OTP-9792 Start of reltool GUI sometimes crashes with a badmatch in reltool_sys_win:do_init/1 because the #sys record fetched with reltool_server:get_sys/1 differs from the #sys record returned from reltool_server:start_link/1. This has been corrected. reltool_server:start_link/1 no longer retuns the #sys record.
2012-03-19[reltool] Update state and tables consistently for all types of config changesSiri Hansen
OTP-9794 OTP-9968 The main idea behind the data structure in reltool_server is that the state shall reflect what is explicitly configured, and the tables shall contain this configuration plus everything that is derived. In some cases, however, this was not the complete truth: * the application table was never read * the module table was never updated on undo * the state contained a lot more than what was explicitly configured This commit re-writes major parts of the reltool_server for the sake of unifying the way the state and tables are updated: * The list of applications in the state now only contains those applications and modules for which there are explicit settings in the configuration (given at startup or changed from the GUI) * When changing any bit of the configuration, the tables are always emptied and every part is derived again from the configuration found in the state * All configuration changes now cause a re-read of the file system, meaning that if something has changed in the file system it will be reflected in the result of the configuration change. This is the case even if no file system related configuration is changed (e.g. root dir or lib dirs) (*POSSIBLE INCOMPATIBILITY*) * Requests for applications and modules from the GUI now always read the tables, not the state * When loading a new configuration file via the GUI, the old configuration is completly scratched, and only the new is valid (*POSSIBLE INCOMPATIBILITY*) * The handling of escripts which include archives of applications is changed to always produce one #app record for the escript in addition to one for each inlined application. All modules are listed as parts of the inlined application where it belongs and not as part of the escript's #app record. This is a temporary solution which will be modified and improved. The following bugs are corrected by this commit: * Loading a config which contains an escript via the GUI menu did not produce the same #app record as when loading the same configuration at reltool start. Paths, version and label could differ. * Loading config with same escript (source) twice caused reltool to add same module twice in #app.mods * Loading config with same escript (inlined beam) twice caused reltool to fail saying module is included by two different applications * Loading config which in addition to an existing escript also adds another escript for which the name sorts before the existing one would cause reltool to fail saying "Application name clash"
2012-03-19[reltool] Add test cases for handling of escriptsSiri Hansen
OTP-9794 OTP-9968 The following test cases are added: * create_standalone_beam * create_standalone_app * create_multiple_standalone * load_config_escript_path * load_config_same_escript_source * load_config_same_escript_beam * load_config_add_escript Most of them are temporarily skipped since they re-produce known problems that will be corrected in a later commit.
2012-03-19[reltool] Add tests for sorting of applications in .rel and .script filesSiri Hansen
OTP-9794 Test cases create_release_sort and create_script_sort are added. The test are temporarily skipped since they detected quite a few bugs that will be corrected with OTP-9792. The following bug is corrected in this commit:' reltool_server did not recognize {App,InclApps} inside a 'rel' specification in the reltool config, e.g. {rel, "myrel", "1.0", [{myapp,[app2]}]}.
2012-03-19[reltool] Add more GUI testsSiri Hansen
OTP-9794 This commit adds a test suite for manual testing of the reltool GUI. By use of test_server:break/1 function, it guides the user through a set of tests in the GUI. Some minor checks are also added to the automatic GUI test, reltool_wx_SUITE.
2012-03-19[reltool] Add more testsSiri Hansen
OTP-9794 Test cases are added for the following functions: * reltool_server:get_sys * reltool_server:set_sys * reltool_server:get_status * reltool_server:gen_rel_files * reltool:eval_target_spec * reltool:get_server
2012-03-19[reltool] Add test case for reltool_server:get_modSiri Hansen
OTP-9794 This test case revealed a bug that occurs when calling reltool_server:get_mod after reltool_server:undo_config. get_mod reads from the module table (ets) and not from the reltool_server state, while undo_config only changes the state. This bug has been corrected, so undo_config now updates both state and tables (it does the same as set_sys).
2012-03-19[reltool] Ensure that tests do not try to start node if target was not createdSiri Hansen
OTP-9794 Some test cases in reltool_server_SUITE tried to create a target system and then start a node running this system. If creation of the target system failed, an attempt would still be made to start the node. This has been corrected so the test is immediately terminated if the target system could not be created.
2012-03-19[reltool] Add test of dependencies derived through calls to external appsSiri Hansen
OTP-9794 This is a test of the mechanism with which reltool_server decides which applications to include and not, based on function calls between applications. This is also the mechanism which forms the base for the application- and module dependency graphs.
2012-03-19[reltool] Add more test cases and fix bugsSiri Hansen
OTP-9794 The following test cases are added for the inteface from GUI to reltool_server: * get_config * get_apps * set_app_and_undo * set_apps_and_undo * load_config_and_undo * reset_config_and_undo * save_config The following bugs were found and corrected: * If set_apps failed, then the state of reltool_server would not be reset to how it was before the failing operation - and every operation done afterwards would also (seem to) fail. * undo_config did not work after reset_config - since faulty #sys record was stored as old_sys. * undo_config did not work after set_app (used when changing the content of an application from the GUI) - since old_sys was not set. Also old_status was not set causing possible warnings to disappear. * undo_config did not work after set_apps (used e.g. when excluding or including an application from the GUI) - since old_sys was not set. Also old_status was not set causing possible warnings to disappear.
2012-03-16Merge branch 'rj/fix-supervisor-shutdown-doc' into maintGustav Simonsson
* rj/fix-supervisor-shutdown-doc: Fix small typo in kernel app doc Cosmetic: split very long lines from supervisor doc Fix supervisor doc: Shutdown, MaxR and MaxT type specs Add the type restrictions in the code comments Remove trailing spaces OTP-9987
2012-03-16Merge branch 'rj/fix-misc-doc-typos' into maintGustav Simonsson
* rj/fix-misc-doc-typos: Fix a code snippet and two typos in the doc
2012-03-16Merge branch 'rj/minor-doc-improvements' into maintGustav Simonsson
* rj/minor-doc-improvements: Remove dashes from error_logger doc Add start/0,1 and help/0 to etop's doc Remove/add extra/missing white spaces
2012-03-16Merge branch 'rj/fix-global-spec' into maintGustav Simonsson
* rj/fix-global-spec: Improve global:re_register_name/2,3 spec Fix global:{random_exit_name,random_notify_name}/3 spec
2012-03-15Merge remote branch 'origin/peppe/common_test/otp-9666' into maintPeter Andersson
* origin/peppe/common_test/otp-9666: Set correct group leader for end_per_testcase process after tc timeout OTP-9666
2012-03-15Merge remote branch 'origin/peppe/common_test/otp-9634_9659' into maintPeter Andersson
* origin/peppe/common_test/otp-9634_9659: Change the option name 'unique_priv_dir' to 'create_priv_dir' Add test suite for the unique_priv_dir feature Make it possible to use unique priv_dir names Create entry for every repeated test in index.html OTP-9634 OTP-9659
2012-03-15Merge branch 'sa/dialyzer-fixes' into maintGustav Simonsson
2012-03-14Ensure that -on_load functions are not reported as unusedStavros Aronis
2012-03-14Merge branch 'bjorn/compiler/coverage-and-minor-fixes/OTP-9982' into maintBjörn Gustavsson
* bjorn/compiler/coverage-and-minor-fixes/OTP-9982: v3_life: Use common code for guards and bodies v3_core: Don't put negative line numbers in annotations v3_kernel: Dig out the line number only when generating a warning v3_kernel: Clean up handling of guards v3_kernel: Introduce is_in_guard/1 v3_kernel: Removed unreached clause for #k_bin_int{} in sub_size_var/1 v3_kernel: Remove unreached handling of #k_bin_int{} in arg_con/1 v3_codegen: Eliminate the special case of 'put' without destination v3_kernel: Don't attempt to share identical literals v3_kernel: Handle sequences in guards v3_kernel: Remove clauses that are never executed in arg_val/1 v3_kernel.hrl: Remove unused record #k_string{} v3_kernel.erl: Remove unused define of EXPENSIVE_BINARY_LIMIT sys_core_fold: Refactor previous_ctx_to_binary/2 to cover it completely sys_core_fold: Fix opt_guard_try/1 sys_core_fold: Simplify opt_bool_not() to cover it completely sys_core_fold: Remove duplicate optimization
2012-03-14Merge remote branch 'origin/peppe/common_test/otp-9899' into maintPeter Andersson
* origin/peppe/common_test/otp-9899: Fix broken repeat functionality OTP-9899
2012-03-14Merge remote branch 'origin/peppe/common_test/otp-9964_9975_9595' into maintPeter Andersson
* origin/peppe/common_test/otp-9964_9975_9595: Have ct_run clean up the code path after each test run Fix problems with ct_run's code path manipulation OTP-9964 OTP-9975 OTP-9595
2012-03-14v3_life: Use common code for guards and bodiesBjörn Gustavsson
2012-03-14v3_core: Don't put negative line numbers in annotationsBjörn Gustavsson
In Core Erlang and later passes, compiler-generated code can be indicated in two different ways: by negative line numbers and by a 'compiler_generated' annotation. Simplify the code and improve coverage by turning negative line numbers positive and adding a 'compiler_generated' annotation in the v3_core pass. That means that Core Erlang and latter passes do not have deal with negative line numbers.
2012-03-14v3_kernel: Dig out the line number only when generating a warningBjörn Gustavsson
2012-03-14v3_kernel: Clean up handling of guardsBjörn Gustavsson
Handling of guards become a mess when andalso/orelse in guards were introduced. Clean it up by using common code for most constructs, regardless of where they occur, and when needed use is_in_guard/1 to handle guard constructs differently.
2012-03-14Set correct group leader for end_per_testcase process after tc timeoutPeter Andersson
Also make sure that warnings about failure or timeout of end_per_testcase (after a test case timeout) get printed in the test case log file. OTP-9666
2012-03-13Change the option name 'unique_priv_dir' to 'create_priv_dir'Peter Andersson
The new values for create_priv_dir are: auto_per_run, auto_per_tc, manual_per_tc
2012-03-13Add test suite for the unique_priv_dir featurePeter Andersson
2012-03-13Make it possible to use unique priv_dir namesPeter Andersson
Introduce the optional feature to have Test Server generate priv_dir directory names that are unique for each test case or config function. The name of the option/flag is 'unique_priv_dir' and it can be set to value 'auto' or 'manual'. If auto, Test Server creates each priv_dir automatically (can be expensive in case of many and/or repeated cases). If manual, the user needs to create the priv_dir explicitly by calling ct:make_priv_dir/0.
2012-03-13Create entry for every repeated test in index.htmlPeter Andersson
For each repeated test during a test run, an entry is created in the index.html file (i.e. the overview file for the test run). In the top level (logdir) index file, only the last test result is listed. E.g, given the test spec: [{merge_tests,false},{dirs,testobj1},{dirs,testobj1}] In the index file for the test run (under Logdir/ct_run.Node.Date.Time), both dir tests are listed. In the top level index file (under Logdir), only the last test is listed (one has to find all results through the all_runs.html file).
2012-03-13Merge remote branch 'origin/peppe/common_test/otp-9730' into maintPeter Andersson
* origin/peppe/common_test/otp-9730: Add column for group name in suite overview log file OTP-9730
2012-03-13Merge remote branch 'origin/peppe/common_test/otp-9904_9900' into maintPeter Andersson
* origin/peppe/common_test/otp-9904_9900: Introduce error notification printout in the tc log OTP-9904 OTP-9900
2012-03-13Merge remote branch 'origin/peppe/common_test/otp-9830' into maintPeter Andersson
* origin/peppe/common_test/otp-9830: Fix problem with buffered DOWN messages OTP-9830
2012-03-13Merge remote branch 'origin/peppe/common_test/otp-9958' into maintPeter Andersson
* origin/peppe/common_test/otp-9958: Fix problem with dropped suite- and test case names OTP-9958
2012-03-13Fix broken repeat functionalityPeter Andersson
OTP-9899
2012-03-12Have ct_run clean up the code path after each test runPeter Andersson
OTP-9595
2012-03-12Fix problems with ct_run's code path manipulationPeter Andersson
OTP-9964 OTP-9975
2012-03-12Add column for group name in suite overview log filePeter Andersson
OTP-9730
2012-03-11Introduce error notification printout in the tc logPeter Andersson
Also fix problem with parallel test cases printing "into each other" (when using ct:print or ct:pal). OTP-9904 OTP-9900
2012-03-09Merge branch 'lukas/test_server/ts_skip_unknown_applications/OTP-9971' into ↵Lukas Larsson
maint * lukas/test_server/ts_skip_unknown_applications/OTP-9971: Ignore non-app suites when checking suites to skip Create special spec file when application is missing
2012-03-09Ignore non-app suites when checking suites to skipLukas Larsson