| Age | Commit message (Collapse) | Author |
|---|
|
Also fix bugs found by new tests
|
|
* siri/ct_telnet/no-more-after-timetrap/OTP-10648:
[common_test] Unregister connection if killed
|
|
|
|
As the file 'lib/ssl/src/ssl_srp_primes.hrl' only contains a
specification of a `srp_parameters` type that isn't exported and also
isn't referenced anywhere (neither in the code nor in the
documentation), the type specification (and hence the file as well) can
be removed.
|
|
|
|
|
|
The symptom of this bug was that a (named) telnet connection which was
open and hanging during a timetrap timeout could no longer be opened
again in subsequent test cases.
Since the connection was hanging, ct_telnet:close/1 which was called
during end_per_testcase would fail (timeout) and cause common_test to
brutally kill the connection. The bug was that the connection was not
unregistered at this point. When trying to open the connection again
in the next testcase, common_test attempted to reuse the same
connection since it had not been unregistered. This failed since the
connection in fact was dead.
|
|
* nox/fix-silent-rules/OTP-11111:
Fix some Makefile rules that didn't support silent rules
|
|
In an email to erlang-questions, Bengt Kleberg wrote:
When I use c:ls/1 it reminds me so much of Unix "ls" that I
expect c:ls("filename") to work. The resulting error surprises
me every time (not the same day).
While teaching c:ls/1 to show non-directory files, update the
error handling to make use of the POSIX error codes from
file:list_dir/1 and file:format_error/1 (which had not been
invented when the c module was first implemented).
Suggested-by: Bengt Kleberg
Test-suite-by: Bengt Kleberg
|
|
|
|
* siri/ct/no_prompt_check/OTP-11095:
[common_test] Refactor ct_telnet_SUITE.erl
[common_test] Add new option 'no_prompt_check' to ct_telnet:expect/3.
[common_test] Add debug printouts in ct_telnet_client
[common_test] Backed out wait_for_linebreak option from ct_telnet
[common_test] Add test for ct_telnet using own telnet server
[common_test] Add telnet server to use for testing
|
|
|
|
http_chunk:decode/4, the side-effecting chunk decoder, was only used
by httpc_handler:handle_http_body/2 but now it's completely unused.
|
|
Previously the only difference between {stream, self} and {stream,
{self, once}} was an extra Pid in the stream_start message due to a
bug in httpc_handler. It was immediately sending a bunch of messages
till the end instead of waiting for httpc:stream_next/1 being called.
|
|
|
|
Conflicts:
lib/crypto/doc/src/crypto.xml
Conflicts:
lib/crypto/doc/src/crypto.xml
|
|
to harmonize with next_iv/2
|
|
to conform with the return value of the other types.
|
|
|
|
test code
|
|
|
|
|
|
|
|
|
|
|
|
Since both the STDLIB and compiler applications turn warnings
into errors, we must stop using the old deprecated crypto functions.
While we are at it, generalize the format of the key tuple returned
by beam_lib:make_crypto_key/2 to facilitate introducing new crypto
methods in the future. Change the format to:
{Type,Key,IV,BlockSize}
where Type, Key, and IV are the first three arguments for either
crypto:block_encrypt4/ or crypto:block_decrypt/4, and BlockSize
is the block size for the crypto algorithm (it is needed to properly
pad the plaintext blocks before encryption).
|
|
|
|
The previous commit ensures that only one will be reported in an answer
message when diameter itself sets Result-Code/Failed-AVP.
The order of errors in #diameter_packet.errors is that in which they're
detected, not the reverse as previously.
|
|
When setting these from an #diameter_packet.errors list, select one
Result-Code or {Result-Code, Failed-AVP}, instead of accumulating all
AVP's from the 2-tuples in the list. This is more in keeping with RFC
6733:
7.5. Failed-AVP AVP
The Failed-AVP AVP (AVP Code 279) is of type Grouped and provides
debugging information in cases where a request is rejected or not
fully processed due to erroneous information in a specific AVP. The
value of the Result-Code AVP will provide information on the reason
for the Failed-AVP AVP. A Diameter answer message SHOULD contain an
instance of the Failed-AVP AVP that corresponds to the error
indicated by the Result-Code AVP. For practical purposes, this
Failed-AVP would typically refer to the first AVP processing error
that a Diameter node encounters.
The text of RFC 3588 was less specific, not including the last two
sentences.
Note that an improper AVP Length will result in both 5014 and 5005 being
detected for the same AVP. Without this commit, Failed-AVP would be
populated with two AVP's for the same error.
|
|
|
|
|
|
Invalid lengths come in two flavours: ones that correctly point at the
end of an AVP's payload but don't agree with its type, and ones that
point elsewhere. The former are relatively harmless but the latter leave
no way to recover AVP boundaries, which typically results in failure to
decode subsequent AVP's in the message in question.
In the case that AVP Length points past the end of the message, diameter
incorrectly regarded the error as 5009, INVALID_AVP_BITS: not right
since the error has nothing to do with AVP Flags. Ditto if the length
was less than 8, a minimal header length. Only in the remaining case was
the detected error 5014, INVALID_AVP_LENGTH. However, in this case it
slavishly followed RFC 3588 in suggesting the undecodable AVP as
Failed-AVP, thereby passing the woeful payload back to the sender to
have equal difficulty decoding. Now follow RFC 6733 and suggest an AVP
with a zero-filled payload.
|
|
* siri/cuddle-with-tests:
Fix gen_server_SUITE:call_with_huge_message_queue
Fix zip_SUITE:borderline test
|
|
|
|
If this option is used, ct_telnet will not search for a prompt before
attempting to match the given pattern. This is useful if, for
instance, the Pattern itself matches the prompt or if the telnet
session starts interactive programs which do not display the normal
prompt.
|
|
* nm/mnesia_idx_insert_speedup/OTP-11103:
Fix missing case clause for ordered_set tables
Optimize index creation for Mnesia set tables
|
|
* hb/stdlib/erl_pp_options/OTP-11100:
[stdlib] Fix pretty printing of invalid forms
|
|
* rickard/inet_opts/OTP-11075:
Make high_msgq_watermark and low_msgq_watermark generic inet options
Conflicts:
erts/preloaded/ebin/prim_inet.beam
|
|
Thanks to Tomáš Janoušek.
|
|
* fredrik/close_socket_ei:
erl_interface: check if file descriptor is valid before closing
|
|
* sla/reltool_copy_file_not_owner_fix/OTP-11099:
Fix possibly "not owner" error while file copy with reltool.
|
|
* dgud/mnesia/schema_info_in_table/OTP-11030:
mnesia: Fixed bad data in table
|
|
|
|
|
|
The new test suite ct_telnet_SUITE_data/ct_telnet_own_server_SUITE
uses the very simple telnet_server.erl located in the common_test test
directory.
|
|
|
|
'bmk/megaco/flex_buffer_overrun_while_scanning_prop_parms/OTP-10998/r16' into maint-r16
* bmk/megaco/flex_buffer_overrun_while_scanning_prop_parms/OTP-10998/r16:
[megaco] Appup cleanup
[megaco] Retroactive version bump
[megaco] Used wrong downgrade tag for (flex) handler
[megaco] Fixrd appup sub-test suite
[megaco] Debug printouts in megaco test server
[megaco] Internal test server not handling failing cases
[megaco] Fix merge
[megaco] Misc codec tickets test case fixes
[megaco] Misc fixes of the (internal) megaco test server
Changed name of test case functions (from seq12263 to otp10998)
Assign correct version and updated release notes accordingly.
Removed comments
Ensure of incorrect number of terms when scanning property groups
Uncommented test cases
Add new messages
Calculation of term_spec size (initial and next) changed
Minor test case rework
Test case cleanup
Add rule for test beam'es
Preliminary test case updates
|
|
|
|
|
|
|
