Age | Commit message (Collapse) | Author |
|
Add closing double quote mark.
|
|
* rickard/make-fixes-20/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-19/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-18/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-17/OTP-15657:
Remove own configured RM make variable
|
|
Instead rely on gnu make's pre-defined RM variable which should
equal 'rm -f'
|
|
* rickard/make-fixes-20/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-19/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-18/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-17/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* john/erts/minusminus_trapping/OTP-15371:
Optimize operator '--' and yield on large inputs
Inline erts_cmp
Clarify a magical allocation size
Fix trapping in lists:reverse/2
|
|
The removal set now uses a red-black tree instead of an array on
large inputs, decreasing runtime complexity from `n*n` to
`n*log(n)`. It will also exit early when there are no more items
left in the removal set, drastically improving performance and
memory use when the items to be removed are present near the head
of the list.
This got a lot more complicated than before as the overhead of
always using a red-black tree was unacceptable when either of the
inputs were small, but this compromise has okay-to-decent
performance regardless of input size.
Co-authored-by: Dmytro Lytovchenko <[email protected]>
|
|
memory typo
|
|
|
|
|
|
ERL-724: "During a 'gentle' shutdown, supervisors unlink from their
children before sending shutdown signals to them. This can lead to a
race condition in supervision trees, when the timeout for gentle
shutdown of a parent supervisor expires and it kills a child
supervisor that has just unlinked from a child of its own, leaving the
child supervisor's own child still running after its supervisor is
killed."
This commit adds a warning about this in the documentation.
|
|
Document allowed integer ops in types
|
|
Refer to the OTP Versions Tree in the documentation in order to
better illustrate how the version scheme works
|
|
|
|
In the documentation, we don't use contractations such as
"don't" or "that's". We also avoid abbreviations. "i.e."
should be written out as "that is". In this case it is
better to omit it altogether.
629ad2e0971ef introduced the violation.
|
|
As explained by @psyeugenic on Slack:
> empty list `[]` is regarded as a separate type from `list()`, `[]` < `list()`
> i.e. nil is `[]`
|
|
|
|
* consistently use var name `Button` instead of `Digit`
* remove unnecessary calls to `do_lock` and `do_unlock`
* fix compile errors
|
|
|
|
Info about support, compatibility, deprecation and removal
OTP-15140
|
|
|
|
|
|
|
|
* sverker/ets-count/OTP-14987:
erts,stdlib: Improve docs about obsolete ets_limit
erts: Reduce test log noise from ets_SUITE
erts: Increase scalability of ets name lookup
erts: Rename one of delete_trap to select_delete_trap
erts: Refactor usage of am_atom_put to ERTS_MAKE_AM
erts: Add system_info(ets_count)
erts: Fix narrow race between ets:new and ets:delete
|
|
|
|
* siri/logger-fix:
Update documentation of logger and error_logger
Change type name logger:log() to logger:log_event()
Update preloaded
Update primary bootstrap
Rename module logger_simple to logger_simple_h
Change env var logger_log_progress to logger_progress_reports
Remove HandlerId from handler callback functions and add it to Config
Change handler id for sasl handler from sasl_h to sasl
Change Compare parameter to logger_filters:domain/2
Update Logger documentation
Rename reset_module_level to unset_module_level
Allow chars_limit to limit strings
Add logger:update_formatter_config/2,3
Set legacy_header=true for kernel's default handler only
Improve documentation of logger and error_logger
Use system_time instead of monotonic_time as timestamp in logger
|
|
|
|
|
|
|
|
|
|
Add ?OTP_RELEASE, -if and -elif to the preprocessor
OTP-15087
|
|
|
|
The argument order is no longer important.
|
|
All corba applications are moved to a separate repository.
E.g. orber, ic, cosEvent, cosEventDomain, cosNotifications
cosTime, cosTransactions, cosProperty and cosFileTransfer.
|
|
[stdlib/sys.erl] Fix sys module's debug statistics not including the out message count when using gen_server:call/2.
OTP-15047
|
|
* raimo/stdlib/gen_statem-dev/OTP-14015:
Fix after feedback
Improve pointer to User's Guide
Fix after feedback on 'When to use'
Add a 'When to use' section
Fix timeout parsing and doc feedback
Improve doc, change images to .svg
erl_docgen: Implement width in image tag
Update User's Guide and pointers to it
Improve error reasons from state enter call
|
|
Currently, in sys:stat/2, the message out only count for system events with format
{out, Msg, To}. However, the gen_server:reply/5 will call sys:handle_debug/4
with format {out, Reply, To, State}. That will make the message out count fail
to pattern matching.
Also update sys_SUITE.erl and relevant docs.
|
|
|
|
|
|
|
|
|
|
|
|
In order to get line numbers into the ghlink we have to add a post
processing step for all xml files.
|
|
The server_node() function in the sample code was referring to messenger@bill, while the commands that follow use messenger@super as node name. Making both names consistent make it easier for newbies to test the code.
|