path: root/erts/emulator/test/port_SUITE.erl

%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 1997-2017. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%%     http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%

-module(port_SUITE).

%%%
%%% Author: Bjorn Gustavsson; iter_max_ports contributed by Peter Hogfeldt.
%%%

%%
%% There are a lot of things to test with open_port(Name, Settings).
%%
%%   Name can be
%%
%%       {spawn, Command}
%%         which according to The Book and the manual page starts an
%%         external program. That is not true. It might very well be
%%         a linked-in program (the notion of 'linked-in driver' is
%%         silly, since any driver is 'linked-in').
%%	  [Spawn of external program is tested.]
%%
%%       Atom
%%         Read all contents of Atom, or write to it.
%%
%%       {fd, In, Out}
%%       Open file descriptors In and Out. [Not tested]
%%
%%   PortSettings can be
%%
%%       {packet, N}
%%         N is 1, 2 or 4.
%%
%%       stream (default)
%%         Without packet length.
%%
%%       use_stdio (default for spawned ports)
%%         The spawned process use file descriptors 0 and 1 for I/O.
%%
%%       nouse_stdio					[Not tested]
%%         Use filedescriptors 3 and 4.  This option is probably only
%%	   meaningful on Unix.
%%
%%       in (default for Atom)
%%         Input only (from Erlang's point of view).
%%
%%       out
%%         Output only (from Erlang's point of view).
%%
%%       binary
%%         The port is a binary port, i.e. messages received and sent
%%         to a port are binaries.
%%
%%       eof
%%         Port is not closed on eof and will not send an exit signal,
%%         instead it will send a {Port, eof} to the controlling process
%%         (output can still be sent to the port (??)).
%%


-export([all/0, suite/0, groups/0, init_per_testcase/2, end_per_testcase/2,
         init_per_suite/1, end_per_suite/1]).
-export([
    bad_args/1,
    bad_env/1,
    bad_packet/1,
    bad_port_messages/1,
    basic_ping/1,
    cd/1,
    cd_relative/1,
    close_deaf_port/1,
    count_fds/1,
    dropped_commands/1,
    dying_port/1,
    env/1,
    eof/1,
    exit_status/1,
    exit_status_multi_scheduling_block/1,
    huge_env/1,
    pipe_limit_env/1,
    input_only/1,
    iter_max_ports/1,
    line/1,
    mix_up_ports/1,
    mon_port_invalid_type/1,
    mon_port_bad_named/1,
    mon_port_bad_remote_on_local/1,
    mon_port_local/1,
    mon_port_name_demonitor/1,
    mon_port_named/1,
    mon_port_origin_dies/1,
    mon_port_owner_dies/1,
    mon_port_pid_demonitor/1,
    mon_port_remote_on_remote/1,
    mon_port_driver_die/1,
    mon_port_driver_die_demonitor/1,
    mul_basic/1,
    mul_slow_writes/1,
    name1/1,
    open_input_file_port/1,
    open_output_file_port/1,
    otp_3906/1,
    otp_4389/1,
    otp_5112/1,
    otp_5119/1,
    otp_6224/1,
    output_only/1,
    parallelism_option/1,
    parallell/1,
    port_program_with_path/1,
    port_setget_data/1,
    ports/1,
    slow_writes/1,
    spawn_driver/1,
    spawn_executable/1,
    stderr_to_stdout/1,
    stream_big/1,
    stream_small/1,
    t_binary/1,
    t_exit/1,
    tps_16_bytes/1,
    tps_1K/1,
    unregister_name/1,
    win_massive/1,
    win_massive_client/1
]).

-export([do_iter_max_ports/2, relative_cd/0]).

%% Internal exports.
-export([tps/3]).
-export([otp_3906_forker/5, otp_3906_start_forker_starter/4]).
-export([env_slave_main/1]).

-include_lib("common_test/include/ct.hrl").
-include_lib("kernel/include/file.hrl").
-include_lib("eunit/include/eunit.hrl").

suite() ->
    [{ct_hooks,[ts_install_cth]},
     {timetrap, {minutes, 1}}].

all() ->
    [otp_6224, {group, stream}, basic_ping, slow_writes,
     bad_packet, bad_port_messages, {group, options},
     {group, multiple_packets}, parallell, dying_port, dropped_commands,
     port_program_with_path, open_input_file_port,
     open_output_file_port, name1, env, huge_env, bad_env, cd,
     cd_relative, pipe_limit_env, bad_args,
     exit_status, iter_max_ports, count_fds, t_exit, {group, tps}, line,
     stderr_to_stdout, otp_3906, otp_4389, win_massive,
     mix_up_ports, otp_5112, otp_5119,
     exit_status_multi_scheduling_block, ports, spawn_driver,
     spawn_executable, close_deaf_port, unregister_name,
     port_setget_data,
     parallelism_option,
     mon_port_invalid_type,
     mon_port_local,
     mon_port_remote_on_remote,
     mon_port_bad_remote_on_local,
     mon_port_origin_dies,
     mon_port_owner_dies,
     mon_port_named,
     mon_port_bad_named,
     mon_port_pid_demonitor,
     mon_port_name_demonitor,
     mon_port_driver_die,
     mon_port_driver_die_demonitor
    ].

groups() ->
    [{stream, [], [stream_small, stream_big]},
     {options, [], [t_binary, eof, input_only, output_only]},
     {multiple_packets, [], [mul_basic, mul_slow_writes]},
     {tps, [], [tps_16_bytes, tps_1K]}].

init_per_testcase(Case, Config) when Case =:= mon_port_driver_die;
                                     Case =:= mon_port_driver_die_demonitor ->
    case erlang:system_info(schedulers_online) of
        1 -> {skip, "Need 2 schedulers to run testcase"};
        _ -> Config
    end;
init_per_testcase(Case, Config) ->
    [{testcase, Case} |Config].

end_per_testcase(_Case, _Config) ->
    ok.

init_per_suite(Config) when is_list(Config) ->
    ignore_cores:init(Config).

end_per_suite(Config) when is_list(Config) ->
    ignore_cores:fini(Config).


-define(WIN_MASSIVE_PORT, 50000).

%% Tests that you can open a massive amount of ports (sockets)
%% on a Windows machine given the correct environment.
win_massive(Config) when is_list(Config) ->
    case os:type() of
        {win32,_} ->
            do_win_massive();
        _ ->
            {skip,"Only on Windows."}
    end.

do_win_massive() ->
    ct:timetrap({minutes, 6}),
    SuiteDir = filename:dirname(code:which(?MODULE)),
    Ports = " +Q 8192",
    {ok, Node} =
    test_server:start_node(win_massive,
                           slave,
                           [{args, " -pa " ++ SuiteDir ++ Ports}]),
    ok = rpc:call(Node,?MODULE,win_massive_client,[3000]),
    test_server:stop_node(Node),
    ok.

win_massive_client(N) ->
    {ok,P}=gen_tcp:listen(?WIN_MASSIVE_PORT,[{reuseaddr,true}]),
    L = win_massive_loop(P,N),
    Len = length(L),
    lists:foreach(fun(E) ->
                          gen_tcp:close(E)
                  end,
                  L),
    case Len div 2 of
        N ->
            ok;
        _Else ->
            {too_few, Len}
    end.

win_massive_loop(_,0) ->
    [];
win_massive_loop(P,N) ->
    case (catch gen_tcp:connect("localhost",?WIN_MASSIVE_PORT,[])) of
        {ok,A} ->
            case (catch gen_tcp:accept(P)) of
                {ok,B} ->
                    %erlang:display(N),
                    [A,B|win_massive_loop(P,N-1)];
                _Else ->
                    [A]
            end;
        _Else0 ->
            []
    end.


%% Test that we can send a stream of bytes and get it back.
%% We will send only a small amount of data, to avoid deadlock.

stream_small(Config) when is_list(Config) ->
    stream_ping(Config, 512, "", []),
    stream_ping(Config, 1777, "", []),
    stream_ping(Config, 1777, "-s512", []),
    ok.

%% Send big amounts of data (much bigger than the buffer size in port test).
%% This will deadlock the emulator if the spawn driver haven't proper
%% non-blocking reads and writes.

stream_big(Config) when is_list(Config) ->
    ct:timetrap({seconds, 180}),
    stream_ping(Config, 43755, "", []),
    stream_ping(Config, 100000, "", []),
    stream_ping(Config, 77777, " -s40000", []),
    ok.

%% Sends packet with header size of 1, 2, and 4, with packets of various
%% sizes.

basic_ping(Config) when is_list(Config) ->
    ct:timetrap({minutes, 2}),
    ping(Config, sizes(1), 1, "", []),
    ping(Config, sizes(2), 2, "", []),
    ping(Config, sizes(4), 4, "", []),
    ok.

%% Let the port program insert delays between characters sent back to
%% Erlang, to test that the Erlang emulator can handle a packet coming in
%% small chunks rather than all at once.

slow_writes(Config) when is_list(Config) ->
    ping(Config, [8], 4, "-s1", []),
    ping(Config, [10], 2, "-s2", []),
    ok.

%% Test that we get {'EXIT', Port, einval} if we try to send a bigger
%% packet than the packet header allows.
bad_packet(Config) when is_list(Config) ->
    PortTest = port_test(Config),
    process_flag(trap_exit, true),

    bad_packet(PortTest, 1, 256),
    bad_packet(PortTest, 1, 257),
    bad_packet(PortTest, 2, 65536),
    bad_packet(PortTest, 2, 65537),
    ok.

bad_packet(PortTest, HeaderSize, PacketSize) ->
    P = open_port({spawn, PortTest}, [{packet, HeaderSize}]),
    P ! {self(), {command, make_zero_packet(PacketSize)}},
    receive
        {'EXIT', P, einval} -> ok;
        Other -> ct:fail({unexpected_message, Other})
    end.

make_zero_packet(0) -> [];
make_zero_packet(N) when N rem 2 == 0 ->
    P = make_zero_packet(N div 2),
    [P|P];
make_zero_packet(N) ->
    P = make_zero_packet(N div 2),
    [0, P|P].

%% Test sending bad messages to a port.
bad_port_messages(Config) when is_list(Config) ->
    PortTest = port_test(Config),
    process_flag(trap_exit, true),

    bad_message(PortTest, {a,b}),
    bad_message(PortTest, {a}),
    bad_message(PortTest, {self(),{command,bad_command}}),
    bad_message(PortTest, {self(),{connect,no_pid}}),
    ok.

bad_message(PortTest, Message) ->
    P = open_port({spawn,PortTest}, []),
    P ! Message,
    receive
        {'EXIT',P,badsig} -> ok;
        Other -> ct:fail({unexpected_message, Other})
    end.

%% Tests various options (stream and {packet, Number} are implicitly
%% tested in other test cases).


%% Tests the 'binary' option for a port.

t_binary(Config) when is_list(Config) ->
    ct:timetrap({seconds, 300}),

    %% Packet mode.
    ping(Config, sizes(1), 1, "", [binary]),
    ping(Config, sizes(2), 2, "", [binary]),
    ping(Config, sizes(4), 4, "", [binary]),

    %% Stream mode.
    stream_ping(Config, 435, "", [binary]),
    stream_ping(Config, 43755, "", [binary]),
    stream_ping(Config, 100000, "", [binary]),
    ok.

name1(Config) when is_list(Config) ->
    ct:timetrap({seconds, 100}),
    PortTest = port_test(Config),
    Command = lists:concat([PortTest, " "]),
    P = open_port({spawn, Command}, []),
    register(myport, P),
    P = whereis(myport),
    Text = "hej",
    myport ! {self(), {command, Text}},
    receive
        {P, {data, Text}} ->
            ok
    end,
    myport ! {self(), close},
    receive
        {P, closed} -> ok
    end,
    undefined = whereis(myport),
    ok.

%% Test that the 'eof' option works.

eof(Config) when is_list(Config) ->
    ct:timetrap({seconds, 100}),
    PortTest = port_test(Config),
    Command = lists:concat([PortTest, " -h0 -q"]),
    P = open_port({spawn, Command}, [eof]),
    receive
        {P, eof} ->
            ok
    end,
    P ! {self(), close},
    receive
        {P, closed} -> ok
    end,
    ok.

%% Tests that the 'in' option for a port works.

input_only(Config) when is_list(Config) ->
    ct:timetrap({seconds, 300}),
    expect_input(Config, [0, 1, 10, 13, 127, 128, 255], 1, "", [in]),
    expect_input(Config, [0, 1, 255, 2048], 2, "", [in]),
    expect_input(Config, [0, 1, 255, 2048], 4, "", [in]),
    expect_input(Config, [0, 1, 10, 13, 127, 128, 255],
                 1, "", [in, binary]),
    ok.

%% Tests that the 'out' option for a port works.

output_only(Config) when is_list(Config) ->
    ct:timetrap({seconds, 100}),
    Dir = proplists:get_value(priv_dir, Config),

    %% First we test that the port program gets the data
    Filename = filename:join(Dir, "output_only_stream"),
    Data = random_packet(35777, "echo"),
    output_and_verify(Config, ["-h0 -o", Filename], Data),
    Wait_time = 500,
    test_server:sleep(Wait_time),
    {ok, Written} = file:read_file(Filename),
    Data = binary_to_list(Written),

    %% Then we test that any writes to stdout from
    %% the port program is not sent to erlang
    output_and_verify(Config, ["-h0"], Data),
    ok.

output_and_verify(Config, Options, Data) ->
    PortTest = port_test(Config),
    Command = lists:concat([PortTest, " " | Options]),
    Port = open_port({spawn, Command}, [out]),
    Port ! {self(), {command, Data}},
    Port ! {self(), close},
    receive
        {Port, closed} -> ok;
        Msg -> ct:fail({received_unexpected_message, Msg})
    end.

%% Test that receiving several packages written in the same
%% write operation works.


%% Basic test of receiving multiple packages, written in
%% one operation by the other end.
mul_basic(Config) when is_list(Config) ->
    ct:timetrap({minutes, 10}),
    expect_input(Config, [0, 1, 255, 10, 13], 1, "", []),
    expect_input(Config, [0, 10, 13, 1600, 32767, 65535], 2, "", []),
    expect_input(Config, [10, 70000], 4, "", []),
    ok.

%% Test reading a buffer consisting of several packets, some
%% of which might be incomplete.  (The port program builds
%% a buffer with several packets, but writes it in chunks with
%% delays in between.)

mul_slow_writes(Config) when is_list(Config) ->
    ct:timetrap({minutes, 4}),
    expect_input(Config, [0, 20, 255, 10, 1], 1, "-s64", []),
    ok.

%% Runs several port tests in parallell.  Each individual test
%% finishes in about 5 seconds.  Running in parallell, all tests
%% should also finish in about 5 seconds.

parallell(Config) when is_list(Config) ->
    ct:timetrap({minutes, 5}),
    Testers = [
               fun() -> stream_ping(Config, 1007, "-s100", []) end,
               fun() -> stream_ping(Config, 10007, "-s1000", []) end,
               fun() -> stream_ping(Config, 10007, "-s1000", []) end,

               fun() -> expect_input(Config, [21, 22, 23, 24, 25], 1,
                                     "-s10", [in]) end,

               fun() -> ping(Config, [10], 1, "-d", []) end,
               fun() -> ping(Config, [20000], 2, "-d", []) end,
               fun() -> ping(Config, [101], 1, "-s10", []) end,
               fun() -> ping(Config, [1001], 2, "-s100", []) end,
               fun() -> ping(Config, [10001], 4, "-s1000", []) end,

               fun() -> ping(Config, [501, 501], 2, "-s100", []) end,
               fun() -> ping(Config, [11, 12, 13, 14, 11], 1, "-s5", []) end],
    process_flag(trap_exit, true),
    Pids = lists:map(fun fun_spawn/1, Testers),
    wait_for(Pids),
    ok.

wait_for([]) ->
    ok;
wait_for(Pids) ->
    io:format("Waiting for ~p", [Pids]),
    receive
        {'EXIT', Pid, normal} ->
            wait_for(lists:delete(Pid, Pids));
        Other ->
            ct:fail({bad_exit, Other})
    end.

%% Tests starting port programs that terminate by themselves.
%% This used to cause problems on Windows.

dying_port(Config) when is_list(Config) ->
    ct:timetrap({minutes, 2}),
    process_flag(trap_exit, true),

    P1 = make_dying_port(Config),
    P2 = make_dying_port(Config),
    P3 = make_dying_port(Config),
    P4 = make_dying_port(Config),
    P5 = make_dying_port(Config),

    %% This should be big enough to be sure to block in the write.
    Garbage = random_packet(16384),

    P1 ! {self(), {command, Garbage}},
    P3 ! {self(), {command, Garbage}},
    P5 ! {self(), {command, Garbage}},

    wait_for_port_exit(P1),
    wait_for_port_exit(P2),
    wait_for_port_exit(P3),
    wait_for_port_exit(P4),
    wait_for_port_exit(P5),
    ok.

wait_for_port_exit(Port) ->
    receive
        {'EXIT', Port, _} ->
            ok
    end.

make_dying_port(Config) when is_list(Config) ->
    PortTest = port_test(Config),
    Command = lists:concat([PortTest, " -h0 -d -q"]),
    open_port({spawn, Command}, [stream]).

%% Test that dropped port_commands work correctly.
%% This used to cause a segfault.
%%
%% This testcase creates a port and then lets many processes
%% do parallel commands to it. After a while it closes the
%% port and we are trying to catch the race when doing a
%% command while the port is closing.
dropped_commands(Config) ->
    %% Test with output callback
    dropped_commands(Config, false, {self(), {command, "1"}}),
    %% Test with outputv callback
    dropped_commands(Config, true, {self(), {command, "1"}}).

dropped_commands(Config, Outputv, Cmd) ->
    Path = proplists:get_value(data_dir, Config),
    os:putenv("ECHO_DRV_USE_OUTPUTV", atom_to_list(Outputv)),
    ok = load_driver(Path, "echo_drv"),
    [dropped_commands_test(Cmd) || _ <- lists:seq(1, 100)],
    timer:sleep(100),
    erl_ddll:unload_driver("echo_drv"),
    os:unsetenv("ECHO_DRV_USE_OUTPUTV"),
    ok.

dropped_commands_test(Cmd) ->
    Port = erlang:open_port({spawn_driver, "echo_drv"}, [{parallelism, true}]),
    spawn_monitor(
      fun() ->
              [spawn_link(fun() -> spin(Port, Cmd) end) || _ <- lists:seq(1,8)],
              timer:sleep(5),
              port_close(Port),
              timer:sleep(5),
              exit(nok)
      end),
    receive _M -> timer:sleep(5) end.

spin(P, Cmd) ->
    P ! Cmd,
    spin(P, Cmd).


%% Tests that port program with complete path (but without any
%% .exe extension) can be started, even if there is a file with
%% the same name but without the extension in the same directory.
%% (In practice, the file with the same name could be a Unix
%% executable.)
%%
%% This used to failed on Windows (the .exe extension had to be
%% explicitly given).
%%
%% This testcase works on Unix, but is not very useful.

port_program_with_path(Config) when is_list(Config) ->
    ct:timetrap({minutes, 2}),
    DataDir = proplists:get_value(data_dir, Config),
    PrivDir = proplists:get_value(priv_dir, Config),

    %% Create a copy of the port test program in a directory not
    %% included in PATH (i.e. in priv_dir), with the name 'my_port_test.exe'.
    %% Also, place a file named 'my_port_test' in the same directory.
    %% This used to confuse the CreateProcess() call in spawn driver.
    %% (On Unix, there will be a single file created, which will be
    %% a copy of the port program.)

    PortTest = os:find_executable("port_test", DataDir),
    io:format("os:find_executable(~p, ~p) returned ~p",
              ["port_test", DataDir, PortTest]),
    {ok, PortTestPgm} = file:read_file(PortTest),
    NewName = filename:join(PrivDir, filename:basename(PortTest)),
    RedHerring = filename:rootname(NewName),
    ok = file:write_file(RedHerring, "I'm just here to confuse.\n"),
    ok = file:write_file(NewName, PortTestPgm),
    ok = file:write_file_info(NewName, #file_info{mode=8#111}),
    PgmWithPathAndNoExt = filename:rootname(NewName),

    %% Open the port using the path to the copied port test program,
    %% but without the .exe extension, and verified that it was started.
    %%
    %% If the bug is present the open_port call will fail with badarg.

    Command = lists:concat([PgmWithPathAndNoExt, " -h2"]),
    P = open_port({spawn, Command}, [{packet, 2}]),
    Message = "echo back to me",
    P ! {self(), {command, Message}},
    receive
        {P, {data, Message}} ->
            ok
    end,
    ok.


%% Tests that files can be read using open_port(Filename, [in]).
%% This used to fail on Windows.
open_input_file_port(Config) when is_list(Config) ->
    PrivDir = proplists:get_value(priv_dir, Config),

    %% Create a file with the file driver and read it back using
    %% open_port/2.

    MyFile1 = filename:join(PrivDir, "my_input_file"),
    FileData1 = "An input file",
    ok = file:write_file(MyFile1, FileData1),
    case open_port(MyFile1, [in]) of
        InputPort when is_port(InputPort) ->
            receive
                {InputPort, {data, FileData1}} ->
                    ok
            end
    end,
    ok.

%% Tests that files can be written using open_port(Filename, [out]).
open_output_file_port(Config) when is_list(Config) ->
    ct:timetrap({minutes, 2}),
    PrivDir = proplists:get_value(priv_dir, Config),

    %% Create a file with open_port/2 and read it back with
    %% the file driver.

    MyFile2 = filename:join(PrivDir, "my_output_file"),
    FileData2_0 = "A file created ",
    FileData2_1 = "with open_port/2.\n",
    FileData2 = FileData2_0 ++ FileData2_1,
    OutputPort = open_port(MyFile2, [out]),
    OutputPort ! {self(), {command, FileData2_0}},
    OutputPort ! {self(), {command, FileData2_1}},
    OutputPort ! {self(), close},
    {ok, Bin} = file:read_file(MyFile2),
    FileData2 = binary_to_list(Bin),
    ok.

%% Tests that all appropriate fd's have been closed in the port program
count_fds(Config) when is_list(Config) ->
    case os:type() of
        {unix, _} ->
            PrivDir = proplists:get_value(priv_dir, Config),
            Filename = filename:join(PrivDir, "my_fd_counter"),

            RunTest = fun(PortOpts) ->
                              PortTest = port_test(Config),
                              Command = lists:concat([PortTest, " -n -f -o", Filename]),
                              Port = open_port({spawn, Command}, PortOpts),
                              Port ! {self(), close},
                              receive
                                  {Port, closed} -> ok
                              end,
                              test_server:sleep(500),
                              {ok, Written} = file:read_file(Filename),
                              Written
                      end,
            <<4:32/native>> = RunTest([out, nouse_stdio]),
            <<4:32/native>> = RunTest([in, nouse_stdio]),
            <<5:32/native>> = RunTest([in, out, nouse_stdio]),
            <<3:32/native>> = RunTest([out, use_stdio]),
            <<3:32/native>> = RunTest([in, use_stdio]),
            <<3:32/native>> = RunTest([in, out, use_stdio]),
            <<3:32/native>> = RunTest([in, out, use_stdio, stderr_to_stdout]),
            <<3:32/native>> = RunTest([out, use_stdio, stderr_to_stdout]);
        _ ->
            {skip, "Skipped on windows"}
    end.

%%
%% Open as many ports as possible. Do this several times and check
%% that we get the same number of ports every time.
%%

iter_max_ports(Config) when is_list(Config) ->
    %% The child_setup program might dump core if we get out of memory.
    %% This is hard to do anything about and is harmless. We run this test
    %% in a working directory with an ignore_core_files file which will make
    %% the search for core files ignore cores generated by this test.
    %%
    Config2 = ignore_cores:setup(?MODULE, iter_max_ports, Config, true),
    try
        iter_max_ports_test(Config2)
    after
        ignore_cores:restore(Config2)
    end.


iter_max_ports_test(Config) ->
    ct:timetrap({minutes, 30}),
    PortTest = port_test(Config),
    Command = lists:concat([PortTest, " -h0 -q"]),
    Iters = case os:type() of
                {win32,_} -> 4;
                _ -> 10
            end,
    %% Run on a different node in order to limit the effect if this test fails.
    Dir = filename:dirname(code:which(?MODULE)),
    {ok,Node} = test_server:start_node(test_iter_max_socks,slave,
                                       [{args,"+Q 2048 -pa " ++ Dir}]),
    L = rpc:call(Node,?MODULE,do_iter_max_ports,[Iters, Command]),
    test_server:stop_node(Node),

    io:format("Result: ~p",[L]),
    all_equal(L),
    all_equal(L),
    {comment, "Max ports: " ++ integer_to_list(hd(L))}.

do_iter_max_ports(N, Command) when N > 0 ->
    [max_ports(Command)| do_iter_max_ports(N-1, Command)];
do_iter_max_ports(_, _) ->
    [].

all_equal([E,E|T]) ->
    all_equal([E|T]);
all_equal([_]) -> ok;
all_equal([]) -> ok.

max_ports(Command) ->
    test_server:sleep(500),
    Ps = open_ports({spawn, Command}, [eof]),
    N = length(Ps),
    close_ports(Ps),
    io:format("Got ~p ports\n",[N]),
    N.

close_ports([P|Ps]) ->
    P ! {self(), close},
    receive
        {P,closed} ->
            ok
    end,
    close_ports(Ps);
close_ports([]) ->
    ok.

open_ports(Name, Settings) ->
    case os:type() of
        {unix, freebsd} ->
            %% FreeBsd has issues with sendmsg/recvmsg in fork
            %% implementation and we therefor have to spawn
            %% slower to make sure that we always hit the same
            %% make roof.
            test_server:sleep(10);
        _ ->
            test_server:sleep(5)
    end,
    case catch open_port(Name, Settings) of
        P when is_port(P) ->
            [P| open_ports(Name, Settings)];
        {'EXIT', {Code, _}} ->
            case Code of
                enfile ->
                    [];
                emfile ->
                    [];
                system_limit ->
                    [];
                enomem ->
                    [];
                Other ->
                    ct:fail({open_ports, Other})
            end;
        Other ->
            ct:fail({open_ports, Other})
    end.

%% Tests that exit(Port, Term) works (has been known to crash the emulator).

t_exit(Config) when is_list(Config) ->
    process_flag(trap_exit, true),
    Pid = fun_spawn(fun suicide_port/1, [Config]),
    receive
        {'EXIT', Pid, die} ->
            ok;
        Other ->
            ct:fail({bad_message, Other})
    end.

suicide_port(Config) when is_list(Config) ->
    Port = port_expect(Config, [], 0, "", []),
    exit(Port, die),
    receive after infinity -> ok end.


tps_16_bytes(Config) when is_list(Config) ->
    tps(16, Config).

tps_1K(Config) when is_list(Config) ->
    tps(1024, Config).

tps(Size, Config) ->
    ct:timetrap({minutes, 5}),
    PortTest = port_test(Config),
    Packet = list_to_binary(random_packet(Size, "e")),
    Port = open_port({spawn, PortTest}, [binary, {packet, 2}]),
    Transactions = 10000,
    {Elapsed, ok} = test_server:timecall(?MODULE, tps,
                                         [Port, Packet, Transactions]),
    {comment, integer_to_list(trunc(Transactions/Elapsed+0.5)) ++ " transactions/s"}.

tps(_Port, _Packet, 0) -> ok;
tps(Port, Packet, N) ->
    port_command(Port, Packet),
    receive
        {Port, {data, Packet}} ->
            tps(Port, Packet, N-1);
        Other ->
            ct:fail({bad_message, Other})
    end.

%% Line I/O test
line(Config) when is_list(Config) ->
    ct:timetrap({minutes, 5}),
    Siz = 110,
    Packet1 = random_packet(Siz),
    Packet2 = random_packet(Siz div 2),
    %% Test that packets are split into lines
    port_expect(Config,[{lists:append([Packet1, io_lib:nl(), Packet2,
                                       io_lib:nl()]),
                         [{eol, Packet1}, {eol, Packet2}]}],
                0, "", [{line,Siz}]),
    %% Test the same for binaries
    port_expect(Config,[{lists:append([Packet1, io_lib:nl(), Packet2,
                                       io_lib:nl()]),
                         [{eol, Packet1}, {eol, Packet2}]}],
                0, "", [{line,Siz},binary]),
    %% Test that too long lines get split
    port_expect(Config,[{lists:append([Packet1, io_lib:nl(), Packet1,
                                       Packet2, io_lib:nl()]),
                         [{eol, Packet1}, {noeol, Packet1},
                          {eol, Packet2}]}], 0, "", [{line,Siz}]),
    %% Test that last output from closing port program gets received.
    L1 = lists:append([Packet1, io_lib:nl(), Packet2]),
    S1 = lists:flatten(io_lib:format("-l~w", [length(L1)])),
    io:format("S1 = ~w, L1 = ~w~n", [S1,L1]),
    port_expect(Config,[{L1,
                         [{eol, Packet1}, {noeol, Packet2}, eof]}], 0,
                S1, [{line,Siz},eof]),
    %% Test that lonely <CR> Don't get treated as newlines
    port_expect(Config,[{lists:append([Packet1, [13], Packet2,
                                       io_lib:nl()]),
                         [{noeol, Packet1}, {eol, [13 |Packet2]}]}],
                0, "", [{line,Siz}]),
    %% Test that packets get built up to lines (delayed output from
    %% port program)
    port_expect(Config,[{Packet2,[]},
                        {lists:append([Packet2, io_lib:nl(),
                                       Packet1, io_lib:nl()]),
                         [{eol, lists:append(Packet2, Packet2)},
                          {eol, Packet1}]}], 0, "-d", [{line,Siz}]),
    %% Test that we get badarg if trying both packet and line
    bad_argument(Config, [{packet, 5}, {line, 5}]),
    ok.

%% Test that redirection of standard error to standard output works.
stderr_to_stdout(Config) when is_list(Config) ->
    ct:timetrap({minutes, 1}),
    %% See that it works
    Packet = random_packet(10),
    port_expect(Config,[{Packet,[Packet]}], 0, "-e -l10",
                [stderr_to_stdout]),
    %% stream_ping(Config, 10, "-e", [stderr_to_stdout]),
    %% See that it doesn't always happen (will generate garbage on stderr)
    port_expect(Config,[{Packet,[eof]}], 0, "-e -l10", [line,eof]),
    ok.


bad_argument(Config, ArgList) ->
    PortTest = port_test(Config),
    case catch open_port({spawn, PortTest}, ArgList) of
        {'EXIT', {badarg, _}} ->
            ok
    end.


%% 'env' option
%% (Can perhaps be made smaller by calling the other utility functions
%% in this module.)
%%
%% Test that the 'env' option works
env(Config)  when is_list(Config) ->
    ct:timetrap({minutes, 1}),
    Priv = proplists:get_value(priv_dir, Config),
    Temp = filename:join(Priv, "env_fun.bin"),

    PluppVal = "dirty monkey",
    env_slave(Temp, [{"plupp",PluppVal}]),

    Long = "LongAndBoringEnvName",
    os:putenv(Long, "nisse"),

    env_slave(Temp, [{"plupp",PluppVal},
                     {"DIR_PLUPP","###glurfrik"}],
              fun() ->
                      PluppVal = os:getenv("plupp"),
                      "###glurfrik" = os:getenv("DIR_PLUPP"),
                      "nisse" = os:getenv(Long)
              end),


    env_slave(Temp, [{"must_define_something","some_value"},
                     {"certainly_not_existing",false},
                     {"ends_with_equal", "value="},
                     {Long,false},
                     {"glurf","a glorfy string"}]),

    %% A lot of non existing variables (mingled with existing)
    NotExistingList = [{lists:flatten(io_lib:format("V~p_not_existing",[X])),false}
                       ||  X <- lists:seq(1,150)],
    ExistingList = [{lists:flatten(io_lib:format("V~p_existing",[X])),"a_value"}
                    ||  X <- lists:seq(1,150)],
    env_slave(Temp, lists:sort(ExistingList ++ NotExistingList)),
    ok.

env_slave(File, Env) ->
    F = fun() ->
                lists:foreach(fun({Name,Val}) ->
                                      Val = os:getenv(Name)
                              end, Env)
        end,
    env_slave(File, Env, F).

env_slave(File, Env, Body) ->
    file:write_file(File, term_to_binary(Body)),
    Program = atom_to_list(lib:progname()),
    Dir = filename:dirname(code:which(?MODULE)),
    Cmd = Program ++ " -pz " ++ Dir ++
    " -noinput -run " ++ ?MODULE_STRING ++ " env_slave_main " ++
    File ++ " -run erlang halt",
    Port = open_port({spawn, Cmd}, [{env,Env},{line,256}]),
    receive
        {Port,{data,{eol,"ok"}}} ->
            ok;
        {Port,{data,{eol,Error}}} ->
            ct:fail("eol error ~p\n", [Error]);
        Other ->
            ct:fail(Other)
    end.

env_slave_main([File]) ->
    {ok,Body0} = file:read_file(File),
    Body = binary_to_term(Body0),
    case Body() of
        {'EXIT',Reason} ->
            io:format("Error: ~p\n", [Reason]);
        _ ->
            io:format("ok\n")
    end,
    init:stop().


%% 'env' option
%%   Test bad environments.
bad_env(Config) when is_list(Config) ->
    try_bad_env([abbb]),
    try_bad_env([{"key","value"}|{"another","value"}]),
    try_bad_env([{"key","value","value2"}]),
    try_bad_env([{"key",[a,b,c]}]),
    try_bad_env([{"key",value}]),
    try_bad_env({a,tuple}),
    try_bad_env(42),
    try_bad_env([a|b]),
    try_bad_env(self()),
    ok.

try_bad_env(Env) ->
    badarg = try open_port({spawn,"ls"}, [{env,Env}])
	     catch
		 error:badarg -> badarg
	     end.


%% Test that we can handle a very very large environment gracefully.
huge_env(Config) when is_list(Config) ->
    ct:timetrap({minutes, 2}),
    {Vars, Cmd} = case os:type() of
                      {win32,_} -> {500, "cmd /q /c ls"};
                      _ ->
                          %% We create a huge environment,
                          %% 20000 variables is about 25MB
                          %% which seems to be the limit on Linux.
                          {20000, "ls"}
                  end,
    Env = [{[$a + I div (25*25*25*25) rem 25,
             $a + I div (25*25*25) rem 25,
             $a + I div (25*25) rem 25,
             $a+I div 25 rem 25, $a+I rem 25],
            lists:duplicate(100,$a+I rem 25)}
           || I <- lists:seq(1,Vars)],
    try erlang:open_port({spawn,Cmd},[exit_status, {env, Env}]) of
        P ->
            receive
                {P, {exit_status,N}} = M ->
                    %% We test that the exit status is an integer, this means
                    %% that the child program has started. If we get an atom
                    %% something went wrong in the driver which is not ok.
                    ct:log("Got ~p",[M]),
                    true = is_integer(N)
            end
    catch E:R ->
              %% Have to catch the error here, as printing the stackdump
              %% in the ct log is way to heavy for some test machines.
              ct:fail("Open port failed ~p:~p",[E,R])
    end.

%% Test to spawn program with command payload buffer
%% just around pipe capacity (9f779819f6bda734c5953468f7798)
pipe_limit_env(Config) when is_list(Config) ->
    Cmd = case os:type() of
              {win32,_} -> "cmd /q /c true";
              _ -> "true"
          end,
    CmdSize = command_payload_size(Cmd),
    Limits = [4096, 16384, 65536], % Try a couple of common pipe buffer sizes

    lists:foreach(fun(Lim) ->
			  lists:foreach(fun(L) -> pipe_limit_env_do(L, Cmd, CmdSize)
					end, lists:seq(Lim-5, Lim+5))
		  end, Limits),
    ok.

pipe_limit_env_do(Bytes, Cmd, CmdSize) ->
    case env_of_bytes(Bytes-CmdSize) of
	[] -> skip;
	Env ->
	    try erlang:open_port({spawn,Cmd},[exit_status, {env, Env}]) of
		P ->
		    receive
			{P, {exit_status,N}} ->
			    %% Bug caused exit_status 150 (EINVAL+128)
			    0 = N
		    end
	    catch E:R ->
		    %% Have to catch the error here, as printing the stackdump
		    %% in the ct log is way to heavy for some test machines.
		    ct:fail("Open port failed ~p:~p",[E,R])
	    end
    end.

%% environ format: KEY=VALUE\0
env_of_bytes(Bytes) when Bytes > 3 ->
    [{"X",lists:duplicate(Bytes-3, $x)}];
env_of_bytes(_) -> [].

%% White box assumption about payload written to pipe
%% for Cmd and current environment (see spawn_start in sys_driver.c)
command_payload_size(Cmd) ->
    EnvSize = lists:foldl(fun(E,Acc) -> length(E) + 1 + Acc end,
			  0, os:getenv()),
    {ok, PWD} = file:get_cwd(),
    (4                      % buffsz
     + 4                    % flags
     + 5 + length(Cmd) + 1  % "exec $Cmd"
     + length(PWD) + 1      % $PWD
     + 1                    % nullbuff
     + 4                    % env_len
     + EnvSize).

%%  Test bad 'args' options.
bad_args(Config) when is_list(Config) ->
    try_bad_args({args, [self()]}),
    try_bad_args({args, ["head" | "tail"]}),
    try_bad_args({args, ["head", "body" | "tail"]}),
    try_bad_args({args, [<<"head">>, <<"body">> | <<"tail">>]}),
    try_bad_args({args, not_a_list}),
    try_bad_args({args, ["string",<<"binary">>, 1472, "string"]}),
    try_bad_args({args, ["string",<<"binary">>], "element #3"}),
    ok.

try_bad_args(Args) ->
    badarg = try open_port({spawn_executable,"ls"}, [Args])
	     catch
		 error:badarg -> badarg
	     end.



%% 'cd' option
%% (Can perhaps be made smaller by calling the other utility functions
%% in this module.)
%%
%% Test that the 'cd' option works
cd(Config)  when is_list(Config) ->
    ct:timetrap({minutes, 1}),

    Program = atom_to_list(lib:progname()),
    DataDir = proplists:get_value(data_dir, Config),
    TestDir = filename:join(DataDir, "dir"),
    Cmd = Program ++ " -pz " ++ DataDir ++
    " -noshell -s port_test pwd -s erlang halt",
    _ = open_port({spawn, Cmd},
                  [{cd, TestDir}, {line, 256}]),
    receive
        {_, {data, {eol, String}}} ->
            case filename_equal(String, TestDir) of
                true ->
                    ok;
                false ->
                    ct:fail({cd, String})
            end;
        Other2 ->
            ct:fail({env, Other2})
    end,
    _ = open_port({spawn, Cmd},
                  [{cd, unicode:characters_to_binary(TestDir)},
                   {line, 256}]),
    receive
        {_, {data, {eol, String2}}} ->
            case filename_equal(String2, TestDir) of
                true ->
                    ok;
                false ->
                    ct:fail({cd, String2})
            end;
        Other3 ->
            ct:fail({env, Other3})
    end,

    InvalidDir = filename:join(DataDir, "invaliddir"),
    try open_port({spawn, Cmd},
                  [{cd, InvalidDir}, exit_status, {line, 256}]) of
        _ ->
            receive
                {_, {exit_status, _}} ->
                    ok;
                Other4 ->
                    ct:fail({env, Other4})
            end
    catch error:eacces ->
            %% This happens on Windows
            ok
    end,

    %% Check that there are no lingering messages
    receive
        Other5 ->
            ct:fail({env, Other5})
    after 10 ->
            ok
    end.

%% Test that an emulator that has set it's cwd to
%% something other then when it started, can use
%% relative {cd,"./"} to open port and that cd will
%% be relative the new cwd and not the original
cd_relative(Config) ->

    Program = atom_to_list(lib:progname()),
    DataDir = proplists:get_value(data_dir, Config),
    TestDir = filename:join(DataDir, "dir"),

    Cmd = Program ++ " -pz " ++ filename:dirname(code:where_is_file("port_SUITE.beam")) ++
    " -noshell -s port_SUITE relative_cd -s erlang halt",

    _ = open_port({spawn, Cmd}, [{line, 256}, {cd, TestDir}]),

    receive
        {_, {data, {eol, String}}} ->
            case filename_equal(String, TestDir) of
                true ->
                    ok;
                false ->
                    ct:fail({cd_relative, String})
            end;
        Other ->
            ct:fail(Other)
    end.

relative_cd() ->

    Program = atom_to_list(lib:progname()),
    ok = file:set_cwd(".."),
    {ok, Cwd} = file:get_cwd(),

    Cmd = Program ++ " -pz " ++ Cwd ++
    " -noshell -s port_test pwd -s erlang halt",

    _ = open_port({spawn, Cmd}, [{line, 256}, {cd, "./dir"}, exit_status]),

    receive
        {_, {data, {eol, String}}} ->
            io:format("~s~n",[String]);
        Other ->
            io:format("ERROR: ~p~n",[Other])
    end.

filename_equal(A, B) ->
    case os:type() of
        {win32, _} ->
            win_filename_equal(A, B);
        _ ->
            A == B
    end.

win_filename_equal([], []) ->
    true;
win_filename_equal([], _) ->
    false;
win_filename_equal(_, []) ->
    false;
win_filename_equal([C1 | Rest1], [C2 | Rest2]) ->
    case tolower(C1) == tolower(C2) of
        true ->
            win_filename_equal(Rest1, Rest2);
        false ->
            false
    end.

tolower(C) when C >= $A, C =< $Z ->
    C + 32;
tolower(C) ->
    C.

%% Tests that child process deaths are managed correctly when there are
%%  a large amount of concurrently dying children. See ticket OTP-3906.
otp_3906(Config)  when is_list(Config) ->
    case os:type() of
        {unix, OSName} ->
            otp_3906(Config, OSName);
        _ ->
            {skipped, "Only run on Unix systems"}
    end.

-define(OTP_3906_CHILDREN,     1000).
-define(OTP_3906_EXIT_STATUS,  17).
-define(OTP_3906_PROGNAME,     "otp_3906").
-define(OTP_3906_TICK_TIMEOUT, 5000).
-define(OTP_3906_OSP_P_ERLP,   10).
-define(OTP_3906_MAX_CONC_OSP, 50).

otp_3906(Config, OSName) ->
    DataDir = filename:dirname(proplists:get_value(data_dir,Config)),
    {ok, Variables} = file:consult(
                        filename:join([DataDir,"..","..",
                                       "test_server","variables"])),
    case lists:keysearch('CC', 1, Variables) of
        {value,{'CC', CC}} ->
            SuiteDir = filename:dirname(code:which(?MODULE)),
            PrivDir = proplists:get_value(priv_dir, Config),
            Prog = otp_3906_make_prog(CC, PrivDir),
            {ok, Node} = test_server:start_node(otp_3906,
                                                slave,
                                                [{args, " -pa " ++ SuiteDir},
                                                 {linked, false}]),
            OP = process_flag(priority, max),
            OTE = process_flag(trap_exit, true),
            FS = spawn_link(Node,
                            ?MODULE,
                            otp_3906_start_forker_starter,
                            [?OTP_3906_CHILDREN, [], self(), Prog]),
            Result = receive
                         {'EXIT', _ForkerStarter, Reason} ->
                             {failed, Reason};
                         {emulator_pid, EmPid} ->
                             case otp_3906_wait_result(FS, 0, 0) of
                                 {succeded,
                                  ?OTP_3906_CHILDREN,
                                  ?OTP_3906_CHILDREN} ->
                                     succeded;
                                 {succeded, Forked, Exited} ->
                                     otp_3906_list_defunct(EmPid, OSName),
                                     {failed,
                                      {mismatch,
                                       {forked, Forked},
                                       {exited, Exited}}};
                                 Res ->
                                     otp_3906_list_defunct(EmPid, OSName),
                                     Res
                             end
                     end,
            process_flag(trap_exit, OTE),
            process_flag(priority, OP),
            test_server:stop_node(Node),
            case Result of
                succeded ->
                    ok;
                _ ->
                    ct:fail(Result)
            end;
        _ ->
            {skipped, "No C compiler found"}
    end.

otp_3906_list_defunct(EmPid, OSName) ->
    % Guess ps switches to use and what to grep for (could be improved)
    {Switches, Zombie} = case OSName of
                             BSD when BSD == darwin;
                                      BSD == openbsd;
                                      BSD == netbsd;
                                      BSD == freebsd ->
                                 {"-ajx", "Z"};
                             _ ->
                                 {"-ef", "[dD]efunct"}
                         end,
    io:format("Emulator pid: ~s~n"
              "Listing of zombie processes:~n"
              "~s~n",
              [EmPid,
               otp_3906_htmlize(os:cmd("ps "
                                       ++ Switches
                                       ++ " | grep "
                                       ++ Zombie))]).

otp_3906_htmlize([]) ->
    [];
otp_3906_htmlize([C | Cs]) ->
    case [C] of
        "<" -> "&lt;" ++ otp_3906_htmlize(Cs);
        ">" -> "&gt;" ++ otp_3906_htmlize(Cs);
        _ ->   [C | otp_3906_htmlize(Cs)]
    end.

otp_3906_make_prog(CC, PrivDir) ->
    SrcFileName = filename:join(PrivDir, ?OTP_3906_PROGNAME ++ ".c"),
    TrgtFileName = filename:join(PrivDir, ?OTP_3906_PROGNAME),
    {ok, SrcFile} = file:open(SrcFileName, write),
    io:format(SrcFile,
              "int           ~n"
              "main(void)    ~n"
              "{             ~n"
              "   return ~p; ~n"
              "}             ~n",
              [?OTP_3906_EXIT_STATUS]),
    file:close(SrcFile),
    os:cmd(CC ++ " " ++ SrcFileName ++ " -o " ++ TrgtFileName),
    TrgtFileName.


otp_3906_wait_result(ForkerStarter, F, E) ->
    receive
        {'EXIT', ForkerStarter, Reason} ->
            {failed, {Reason, {forked, F}, {exited, E}}};
        forked ->
            otp_3906_wait_result(ForkerStarter, F+1, E);
        exited ->
            otp_3906_wait_result(ForkerStarter, F, E+1);
        tick ->
            otp_3906_wait_result(ForkerStarter, F, E);
        succeded ->
            {succeded, F, E}
    after
        ?OTP_3906_TICK_TIMEOUT ->
            unlink(ForkerStarter),
            exit(ForkerStarter, timeout),
            {failed, {timeout, {forked, F}, {exited, E}}}
    end.

otp_3906_collect([], _) ->
    done;
otp_3906_collect(RefList, Sup) ->
    otp_3906_collect(otp_3906_collect_one(RefList, Sup), Sup).

otp_3906_collect_one(RefList, Sup) ->
    receive
        Ref when is_reference(Ref) ->
            Sup ! tick,
            lists:delete(Ref, RefList)
    end.

otp_3906_start_forker(N, Sup, Prog) ->
    Ref = make_ref(),
    spawn_opt(?MODULE,
              otp_3906_forker,
              [N, self(), Ref, Sup, Prog],
              [link, {priority, max}]),
    Ref.

otp_3906_start_forker_starter(N, RefList, Sup, Prog) ->
    process_flag(priority, max),
    EmPid = os:getpid(),
    Sup ! {emulator_pid, EmPid},
    otp_3906_forker_starter(N, RefList, Sup, Prog).

otp_3906_forker_starter(0, RefList, Sup, _) ->
    otp_3906_collect(RefList, Sup),
    unlink(Sup),
    Sup ! succeded;
otp_3906_forker_starter(N, RefList, Sup, Prog)
  when length(RefList) >= ?OTP_3906_MAX_CONC_OSP ->
    otp_3906_forker_starter(N, otp_3906_collect_one(RefList, Sup), Sup, Prog);
otp_3906_forker_starter(N, RefList, Sup, Prog)
  when is_integer(N), N > ?OTP_3906_OSP_P_ERLP ->
    otp_3906_forker_starter(N-?OTP_3906_OSP_P_ERLP,
                            [otp_3906_start_forker(?OTP_3906_OSP_P_ERLP,
                                                   Sup,
                                                   Prog)|RefList],
                            Sup,
                            Prog);
otp_3906_forker_starter(N, RefList, Sup, Prog) when is_integer(N) ->
    otp_3906_forker_starter(0,
                            [otp_3906_start_forker(N,
                                                   Sup,
                                                   Prog)|RefList],
                            Sup,
                            Prog).

otp_3906_forker(0, Parent, Ref, _, _) ->
    unlink(Parent),
    Parent ! Ref;
otp_3906_forker(N, Parent, Ref, Sup, Prog) ->
    Port = erlang:open_port({spawn, Prog}, [exit_status, in]),
    Sup ! forked,
    receive
        {Port, {exit_status, ?OTP_3906_EXIT_STATUS}} ->
            Sup ! exited,
            otp_3906_forker(N-1, Parent, Ref, Sup, Prog);
        {Port, Res} ->
            exit(Res);
        Other ->
            exit(Other)
    end.


otp_4389(Config)  when is_list(Config) ->
    case os:type() of
        {unix, _} ->
            ct:timetrap({minutes, 4}),
            TCR = self(),
            case get_true_cmd() of
                True when is_list(True) ->
                    lists:foreach(
                      fun (P) ->
                              receive
                                  {P, ok} ->  ok;
                                  {P, Err} -> ct:fail(Err)
                              end
                      end,
                      lists:map(
                        fun(_) ->
                                spawn_link(
                                  fun() ->
                                          process_flag(trap_exit, true),
                                          case catch open_port({spawn, True},
                                                               [stream,exit_status]) of
                                              P when is_port(P) ->
                                                  receive
                                                      {P,{exit_status,_}} ->
                                                          TCR ! {self(),ok};
                                                      {'EXIT',_,{R2,_}} when R2 == emfile;
                                                                             R2 == eagain;
                                                                             R2 == enomem ->
                                                          TCR ! {self(),ok};
                                                      Err2 ->
                                                          TCR ! {self(),{msg,Err2}}
                                                  end;
                                              {'EXIT',{R1,_}} when R1 == emfile;
                                                                   R1 == eagain;
                                                                   R1 == enomem ->
                                                  TCR ! {self(),ok};
                                              Err1 ->
                                                  TCR ! {self(), {open_port,Err1}}
                                          end
                                  end)
                        end,
                        lists:duplicate(1000,[]))),
                    {comment,
                     "This test case doesn't always fail when the bug that "
                     "it tests for is present (it is most likely to fail on"
                     " a multi processor machine). If the test case fails it"
                     " will fail by deadlocking the emulator."};
                _ ->
                    {skipped, "\"true\" command not found"}
            end;
        _ ->
            {skip,"Only run on Unix"}
    end.

get_true_cmd() ->
    DoFileExist = fun (FileName) ->
                          case file:read_file_info(FileName) of
                              {ok, _} -> throw(FileName);
                              _ -> not_found
                          end
                  end,
    catch begin
              %% First check in /usr/bin and /bin
              DoFileExist("/usr/bin/true"),
              DoFileExist("/bin/true"),
              %% Try which
              case filename:dirname(os:cmd("which true")) of
                  "." -> not_found;
                  TrueDir -> filename:join(TrueDir, "true")
              end
          end.

%% 'exit_status' option
%%
%% Test that the 'exit_status' option works
exit_status(Config)  when is_list(Config) ->
    ct:timetrap({minutes, 1}),
    port_expect(Config,
                [{"x", [{exit_status, 5}]}],
                1, "", [exit_status]),
    ok.

%% Test spawning a driver specifically
spawn_driver(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "echo_drv"),
    Port = erlang:open_port({spawn_driver, "echo_drv"}, []),
    Port ! {self(), {command, "Hello port!"}},
    receive
        {Port, {data, "Hello port!"}} = Msg1 ->
            io:format("~p~n", [Msg1]),
            ok;
        Other ->
            ct:fail({unexpected, Other})
    end,
    Port ! {self(), close},
    receive {Port, closed} -> ok end,

    Port2 = erlang:open_port({spawn_driver, "echo_drv -Hello port?"},
                             []),
    receive
        {Port2, {data, "Hello port?"}} = Msg2 ->
            io:format("~p~n", [Msg2]),
            ok;
        Other2 ->
            ct:fail({unexpected2, Other2})
    end,
    Port2 ! {self(), close},
    receive {Port2, closed} -> ok end,
    {'EXIT',{badarg,_}} = (catch erlang:open_port({spawn_driver, "ls"}, [])),
    {'EXIT',{badarg,_}} = (catch erlang:open_port({spawn_driver, "cmd"}, [])),
    {'EXIT',{badarg,_}} = (catch erlang:open_port({spawn_driver, os:find_executable("erl")}, [])),
    ok.

%% Test parallelism option of open_port
parallelism_option(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "echo_drv"),
    Port = erlang:open_port({spawn_driver, "echo_drv"},
                            [{parallelism, true}]),
    {parallelism, true} = erlang:port_info(Port, parallelism),
    Port ! {self(), {command, "Hello port!"}},
    receive
        {Port, {data, "Hello port!"}} = Msg1 ->
            io:format("~p~n", [Msg1]),
            ok;
        Other ->
            ct:fail({unexpected, Other})
    end,
    Port ! {self(), close},
    receive {Port, closed} -> ok end,

    Port2 = erlang:open_port({spawn_driver, "echo_drv -Hello port?"},
                             [{parallelism, false}]),
    {parallelism, false} = erlang:port_info(Port2, parallelism),
    receive
        {Port2, {data, "Hello port?"}} = Msg2 ->
            io:format("~p~n", [Msg2]),
            ok;
        Other2 ->
            ct:fail({unexpected2, Other2})
    end,
    Port2 ! {self(), close},
    receive {Port2, closed} -> ok end,
    ok.

%% Test spawning an executable specifically
spawn_executable(Config) when is_list(Config) ->
    DataDir = proplists:get_value(data_dir, Config),
    EchoArgs1 = filename:join([DataDir,"echo_args"]),
    ExactFile1 = filename:nativename(os:find_executable(EchoArgs1)),
    [ExactFile1] = run_echo_args(DataDir,[]),
    [ExactFile1] = run_echo_args(DataDir,[binary]),
    ["echo_args"] = run_echo_args(DataDir,["echo_args"]),
    ["echo_args"] = run_echo_args(DataDir,[binary, "echo_args"]),
    ["echo_arguments"] = run_echo_args(DataDir,["echo_arguments"]),
    ["echo_arguments"] = run_echo_args(DataDir,[binary, "echo_arguments"]),
    [ExactFile1,"hello world","dlrow olleh"] =
    run_echo_args(DataDir,[ExactFile1,"hello world","dlrow olleh"]),
    [ExactFile1] = run_echo_args(DataDir,[default]),
    [ExactFile1] = run_echo_args(DataDir,[binary, default]),
    [ExactFile1,"hello world","dlrow olleh"] =
    run_echo_args(DataDir,[switch_order,ExactFile1,"hello world",
                           "dlrow olleh"]),
    [ExactFile1,"hello world","dlrow olleh"] =
    run_echo_args(DataDir,[binary,switch_order,ExactFile1,"hello world",
                           "dlrow olleh"]),
    [ExactFile1,"hello world","dlrow olleh"] =
    run_echo_args(DataDir,[default,"hello world","dlrow olleh"]),

    [ExactFile1,"hello world","dlrow olleh"] =
    run_echo_args_2("\""++ExactFile1++"\" "++"\"hello world\" \"dlrow olleh\""),
    [ExactFile1,"hello world","dlrow olleh"] =
    run_echo_args_2(unicode:characters_to_binary("\""++ExactFile1++"\" "++"\"hello world\" \"dlrow olleh\"")),

    PrivDir = proplists:get_value(priv_dir, Config),
    SpaceDir = filename:join([PrivDir,"With Spaces"]),
    file:make_dir(SpaceDir),
    Executable = filename:basename(ExactFile1),
    file:copy(ExactFile1,filename:join([SpaceDir,Executable])),
    ExactFile2 = filename:nativename(filename:join([SpaceDir,Executable])),
    chmodplusx(ExactFile2),
    io:format("|~s|~n",[ExactFile2]),
    [ExactFile2] = run_echo_args(SpaceDir,[]),
    ["echo_args"] = run_echo_args(SpaceDir,["echo_args"]),
    ["echo_arguments"] = run_echo_args(SpaceDir,["echo_arguments"]),
    [ExactFile2,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,[ExactFile2,"hello world","dlrow olleh"]),
    [ExactFile2,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,[binary, ExactFile2,"hello world","dlrow olleh"]),

    [ExactFile2,"hello \"world\"","\"dlrow\" olleh"] =
    run_echo_args(SpaceDir,[binary, ExactFile2,"hello \"world\"","\"dlrow\" olleh"]),
    [ExactFile2,"hello \"world\"","\"dlrow\" olleh"] =
    run_echo_args(SpaceDir,[binary, ExactFile2,"hello \"world\"","\"dlrow\" olleh"]),

    [ExactFile2] = run_echo_args(SpaceDir,[default]),
    [ExactFile2,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,[switch_order,ExactFile2,"hello world", "dlrow olleh"]),
    [ExactFile2,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,[default,"hello world","dlrow olleh"]),
    [ExactFile2,"hello world","dlrow olleh"] =
    run_echo_args_2("\""++ExactFile2++"\" "++"\"hello world\" \"dlrow olleh\""),
    [ExactFile2,"hello world","dlrow olleh"] =
    run_echo_args_2(unicode:characters_to_binary("\""++ExactFile2++"\" "++"\"hello world\" \"dlrow olleh\"")),

    ExeExt =
    case string:to_lower(lists:last(string:tokens(ExactFile2,"."))) of
        "exe" ->
            ".exe";
        _ ->
            ""
    end,
    Executable2 = "spoky name"++ExeExt,
    file:copy(ExactFile1,filename:join([SpaceDir,Executable2])),
    ExactFile3 = filename:nativename(filename:join([SpaceDir,Executable2])),
    chmodplusx(ExactFile3),
    [ExactFile3] = run_echo_args(SpaceDir,Executable2,[]),
    ["echo_args"] = run_echo_args(SpaceDir,Executable2,["echo_args"]),
    ["echo_arguments"] = run_echo_args(SpaceDir,Executable2,["echo_arguments"]),
    [ExactFile3,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,Executable2,[ExactFile3,"hello world","dlrow olleh"]),
    [ExactFile3] = run_echo_args(SpaceDir,Executable2,[default]),
    [ExactFile3,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,Executable2,
                  [switch_order,ExactFile3,"hello world",
                   "dlrow olleh"]),
    [ExactFile3,"hello world","dlrow olleh"] =
    run_echo_args(SpaceDir,Executable2,
                  [default,"hello world","dlrow olleh"]),
    [ExactFile3,"hello world","dlrow olleh"] =
    run_echo_args_2("\""++ExactFile3++"\" "++"\"hello world\" \"dlrow olleh\""),
    [ExactFile3,"hello world","dlrow olleh"] =
    run_echo_args_2(unicode:characters_to_binary("\""++ExactFile3++"\" "++"\"hello world\" \"dlrow olleh\"")),
    {'EXIT',{enoent,_}} = (catch run_echo_args(SpaceDir,"fnurflmonfi",
                                               [default,"hello world",
                                                "dlrow olleh"])),

    NonExec = "kronxfrt"++ExeExt,
    file:write_file(filename:join([SpaceDir,NonExec]),
                    <<"Not an executable">>),
    {'EXIT',{eacces,_}} = (catch run_echo_args(SpaceDir,NonExec,
                                               [default,"hello world",
                                                "dlrow olleh"])),
    {'EXIT',{enoent,_}} = (catch open_port({spawn_executable,"cmd"},[])),
    {'EXIT',{enoent,_}} = (catch open_port({spawn_executable,"sh"},[])),
    case os:type() of
        {win32,_} ->
            test_bat_file(SpaceDir);
        {unix,_} ->
            test_sh_file(SpaceDir)
    end,
    ok.

unregister_name(Config) when is_list(Config) ->
    true = register(crash, open_port({spawn, "sleep 100"}, [])),
    true = unregister(crash).

test_bat_file(Dir) ->
    FN = "tf.bat",
    Full = filename:join([Dir,FN]),
    D = [<<"@echo off\r\n">>,
         <<"echo argv[0]:^|%0^|\r\n">>,
         <<"if \"%1\" == \"\" goto done\r\n">>,
         <<"echo argv[1]:^|%1^|\r\n">>,
         <<"if \"%2\" == \"\" goto done\r\n">>,
         <<"echo argv[2]:^|%2^|\r\n">>,
         <<"if \"%3\" == \"\" goto done\r\n">>,
         <<"echo argv[3]:^|%3^|\r\n">>,
         <<"if \"%4\" == \"\" goto done\r\n">>,
         <<"echo argv[4]:^|%4^|\r\n">>,
         <<"if \"%5\" == \"\" goto done\r\n">>,
         <<"echo argv[5]:^|%5^|\r\n">>,
         <<"\r\n">>,
         <<":done\r\n">>,
         <<"\r\n">>],
    file:write_file(Full,list_to_binary(D)),
    EF = filename:basename(FN),
    [DN,"hello","world"] =
    run_echo_args(Dir,FN,
                  [default,"hello","world"]),
    %% The arg0 argumant should be ignored when running batch files
    [DN,"hello","world"] =
    run_echo_args(Dir,FN,
                  ["knaskurt","hello","world"]),
    EF = filename:basename(DN),
    ok.

test_sh_file(Dir) ->
    FN = "tf.sh",
    Full = filename:join([Dir,FN]),
    D = [<<"#! /bin/sh\n">>,
         <<"echo 'argv[0]:|'$0'|'\n">>,
         <<"i=1\n">>,
         <<"while [ '!' -z \"$1\" ]; do\n">>,
         <<"    echo 'argv['$i']:|'\"$1\"'|'\n">>,
         <<"    shift\n">>,
         <<"    i=`expr $i + 1`\n">>,
         <<"done\n">>],
    file:write_file(Full,list_to_binary(D)),
    chmodplusx(Full),
    [Full,"hello","world"] =
    run_echo_args(Dir,FN,
                  [default,"hello","world"]),
    [Full,"hello","world of spaces"] =
    run_echo_args(Dir,FN,
                  [default,"hello","world of spaces"]),
    file:write_file(filename:join([Dir,"testfile1"]),<<"testdata1">>),
    file:write_file(filename:join([Dir,"testfile2"]),<<"testdata2">>),
    Pattern = filename:join([Dir,"testfile*"]),
    L = filelib:wildcard(Pattern),
    2 = length(L),
    [Full,"hello",Pattern] =
    run_echo_args(Dir,FN,
                  [default,"hello",Pattern]),
    ok.



chmodplusx(Filename) ->
    case file:read_file_info(Filename) of
        {ok,FI} ->
            FI2 = FI#file_info{mode = ((FI#file_info.mode) bor 8#00100)},
            file:write_file_info(Filename,FI2);
        _ ->
            ok
    end.

run_echo_args_2(FullnameAndArgs) ->
    Port = open_port({spawn,FullnameAndArgs},[eof]),
    Data = collect_data(Port),
    Port ! {self(), close},
    receive {Port, closed} -> ok end,
    parse_echo_args_output(Data).


run_echo_args(Where,Args) ->
    run_echo_args(Where,"echo_args",Args).
run_echo_args(Where,Prog,Args) ->
    {Binary, ArgvArg} = pack_argv(Args),
    Command0 = filename:join([Where,Prog]),
    Command = case Binary of
                  true -> unicode:characters_to_binary(Command0);
                  false -> Command0
              end,
    Port = open_port({spawn_executable,Command},ArgvArg++[eof]),
    Data = collect_data(Port),
    Port ! {self(), close},
    receive {Port, closed} -> ok end,
    parse_echo_args_output(Data).

pack_argv([binary|Args]) ->
    {true, pack_argv(Args, true)};
pack_argv(Args) ->
    {false, pack_argv(Args, false)}.

pack_argv(Args, Binary) ->
    case Args of
        [] ->
            [];
        [default|T] ->
            [{args,[make_bin(Arg,Binary) || Arg <- T]}];
        [switch_order,H|T] ->
            [{args,[make_bin(Arg,Binary) || Arg <- T]},{arg0,make_bin(H,Binary)}];
        [H|T] ->
            [{arg0,make_bin(H,Binary)},{args,[make_bin(Arg,Binary) || Arg <- T]}]
    end.

make_bin(Str, false) -> Str;
make_bin(Str, true) ->  unicode:characters_to_binary(Str).

collect_data(Port) ->
    receive
        {Port, {data, Data}} ->
            Data ++ collect_data(Port);
        {Port, eof} ->
            []
    end.

parse_echo_args_output(Data) ->
    [lists:last(string:tokens(S,"|")) || S <- string:tokens(Data,"\r\n")].

%% Test that the emulator does not mix up ports when the port table wraps
mix_up_ports(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "echo_drv"),
    Port = erlang:open_port({spawn, "echo_drv"}, []),
    Port ! {self(), {command, "Hello port!"}},
    receive
        {Port, {data, "Hello port!"}} = Msg1 ->
            io:format("~p~n", [Msg1]),
            ok;
        Other ->
            ct:fail({unexpected, Other})
    end,
    Port ! {self(), close},
    receive {Port, closed} -> ok end,
    loop(start, done,
         fun(P) ->
                 Q =
                 (catch erlang:open_port({spawn, "echo_drv"}, [])),
                 %%		       io:format("~p ", [Q]),
                 if is_port(Q) ->
                        Q;
                    true ->
                        io:format("~p~n", [P]),
                        done
                 end
         end),
    Port ! {self(), {command, "Hello again port!"}},
    receive
        Msg2 ->
            ct:fail({unexpected, Msg2})
    after 1000 ->
              ok
    end,
    ok.

loop(Stop, Stop, Fun) when is_function(Fun) ->
    ok;
loop(Start, Stop, Fun) when is_function(Fun) ->
    loop(Fun(Start), Stop, Fun).


%% Test that link to connected process is taken away when port calls
%% driver_exit() also when the port index has wrapped
otp_5112(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "exit_drv"),
    Port = otp_5112_get_wrapped_port(),
    io:format("Max ports: ~p~n",[max_ports()]),
    io:format("Port: ~p~n",[Port]),
    {links, Links1} = process_info(self(),links),
    io:format("Links1: ~p~n",[Links1]),
    true = lists:member(Port, Links1),
    Port ! {self(), {command, ""}},
    wait_until(fun () -> lists:member(Port, erlang:ports()) == false end),
    {links, Links2} = process_info(self(),links),
    io:format("Links2: ~p~n",[Links2]),
    false = lists:member(Port, Links2), %% This used to fail
    ok.

otp_5112_get_wrapped_port() ->
    P1 = erlang:open_port({spawn, "exit_drv"}, []),
    case port_ix(P1) < max_ports() of
        true ->
            io:format("Need to wrap port index (~p)~n", [P1]),
            otp_5112_wrap_port_ix([P1]),
            P2 = erlang:open_port({spawn, "exit_drv"}, []),
            false = port_ix(P2) < max_ports(),
            P2;
        false ->
            io:format("Port index already wrapped (~p)~n", [P1]),
            P1
    end.

otp_5112_wrap_port_ix(Ports) ->
    case (catch erlang:open_port({spawn, "exit_drv"}, [])) of
        Port when is_port(Port) ->
            otp_5112_wrap_port_ix([Port|Ports]);
        _ ->
            %% Port table now full; empty port table
            lists:foreach(fun (P) ->  P ! {self(), close} end,
                          Ports),
            ok
    end.


%% Test that port index is not unnecessarily wrapped
otp_5119(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "exit_drv"),
    PI1 = port_ix(otp_5119_fill_empty_port_tab([])),
    Port2 = erlang:open_port({spawn, "exit_drv"}, []),
    PI2 = port_ix(Port2),
    {PortIx1, PortIx2} = case PI2 > PI1 of
                             true ->
                                 {PI1, PI2};
                             false ->
                                 {port_ix(otp_5119_fill_empty_port_tab([Port2])),
                                  port_ix(erlang:open_port({spawn, "exit_drv"}, []))}
                         end,
    MaxPorts = max_ports(),
    io:format("PortIx1 = ~p ~p~n", [PI1, PortIx1]),
    io:format("PortIx2 = ~p ~p~n", [PI2, PortIx2]),
    io:format("MaxPorts = ~p~n", [MaxPorts]),
    true = PortIx2 > PortIx1,
    true = PortIx2 =< PortIx1 + MaxPorts,
    ok.

otp_5119_fill_empty_port_tab(Ports) ->
    case (catch erlang:open_port({spawn, "exit_drv"}, [])) of
        Port when is_port(Port) ->
            otp_5119_fill_empty_port_tab([Port|Ports]);
        _ ->
            %% Port table now full; empty port table
            lists:foreach(fun (P) ->  P ! {self(), close} end,
                          Ports),
            [LastPort|_] = Ports,
            LastPort
    end.

max_ports() ->
    erlang:system_info(port_limit).

port_ix(Port) when is_port(Port) ->
    ["#Port",_,PortIxStr] = string:tokens(erlang:port_to_list(Port),
                                          "<.>"),
    list_to_integer(PortIxStr).


%% Check that port command failure doesn't crash the emulator
otp_6224(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "failure_drv"),
    Go = make_ref(),
    Failer = spawn(fun () ->
                           receive Go -> ok end,
                           Port = open_port({spawn, "failure_drv"},
                                            []),
                           Port ! {self(), {command, "Fail, please!"}},
                           otp_6224_loop()
                   end),
    Mon = erlang:monitor(process, Failer),
    Failer ! Go,
    receive
        {'DOWN', Mon, process, Failer, Reason} ->
            case Reason of
                {driver_failed, _} -> ok;
                driver_failed -> ok;
                _ -> ct:fail({unexpected_exit_reason,
                              Reason})
            end
    end,
    ok.

otp_6224_loop() ->
    receive _ -> ok after 0 -> ok end,
    otp_6224_loop().


-define(EXIT_STATUS_MSB_MAX_PROCS, 64).
-define(EXIT_STATUS_MSB_MAX_PORTS, 300).

exit_status_multi_scheduling_block(Config) when is_list(Config) ->
    Repeat = 3,
    case os:type() of
        {unix, _} ->
            ct:timetrap({minutes, 2*Repeat}),
            SleepSecs = 6,
            try
                lists:foreach(fun (_) ->
                                      exit_status_msb_test(Config,
                                                           SleepSecs)
                              end,
                              lists:seq(1, Repeat))
            after
                %% Wait for the system to recover (regardless
                %% of success or not) otherwise later testcases
                %% may unnecessarily fail.
                receive after SleepSecs+500 -> ok end
            end;
        _ -> {skip, "Not implemented for this OS"}
    end.

exit_status_msb_test(Config, SleepSecs) when is_list(Config) ->
    %%
    %% We want to start port programs from as many schedulers as possible
    %% and we want these port programs to terminate while multi-scheduling
    %% is blocked.
    %%
    NoSchedsOnln = erlang:system_info(schedulers_online),
    Parent = self(),
    io:format("SleepSecs = ~p~n", [SleepSecs]),
    PortProg = "sleep " ++ integer_to_list(SleepSecs),
    Start = erlang:monotonic_time(microsecond),
    NoProcs = case NoSchedsOnln of
                  NProcs when NProcs < ?EXIT_STATUS_MSB_MAX_PROCS ->
                      NProcs;
                  _ ->
                      ?EXIT_STATUS_MSB_MAX_PROCS
              end,
    NoPortsPerProc = case 20*NoProcs of
                         TNPorts when TNPorts < ?EXIT_STATUS_MSB_MAX_PORTS -> 20;
                         _ -> ?EXIT_STATUS_MSB_MAX_PORTS div NoProcs
                     end,
    io:format("NoProcs = ~p~nNoPortsPerProc = ~p~n",
              [NoProcs, NoPortsPerProc]),
    ProcFun
    = fun () ->
              PrtSIds = lists:map(
                          fun (_) ->
                                  erlang:yield(),
                                  case catch open_port({spawn, PortProg},
                                                       [exit_status]) of
                                      Prt when is_port(Prt) ->
                                          {Prt,
                                           erlang:system_info(scheduler_id)};
                                      {'EXIT', {Err, _}} when Err == eagain;
                                                              Err == emfile;
                                                              Err == enomem ->
                                          noop;
                                      {'EXIT', Err} when Err == eagain;
                                                         Err == emfile;
                                                         Err == enomem ->
                                          noop;
                                      Error ->
                                          ct:fail(Error)
                                  end
                          end,
                          lists:seq(1, NoPortsPerProc)),
              SIds = lists:filter(fun (noop) -> false;
                                      (_) -> true
                                  end,
                                  lists:map(fun (noop) -> noop;
                                                ({_, SId}) -> SId
                                            end,
                                            PrtSIds)),
              process_flag(scheduler, 0),
              Parent ! {self(), started, SIds},
              lists:foreach(
                fun (noop) ->
                        noop;
                    ({Port, _}) ->
                        receive
                            {Port, {exit_status, 0}} ->
                                ok;
                            {Port, {exit_status, Status}} when Status > 128 ->
                                %% Sometimes happens when we have created
                                %% too many ports.
                                ok;
                            {Port, {exit_status, _}} = ESMsg ->
                                {Port, {exit_status, 0}} = ESMsg
                        end
                end,
                PrtSIds),
              Parent ! {self(), done}
      end,
    Procs = lists:map(fun (N) ->
                              spawn_opt(ProcFun,
                                        [link,
                                         {scheduler,
                                          (N rem NoSchedsOnln)+1}])
                      end,
                      lists:seq(1, NoProcs)),
    SIds = lists:map(fun (P) ->
                             receive {P, started, SIds} -> SIds end
                     end,
                     Procs),
    StartedTime = (erlang:monotonic_time(microsecond) - Start)/1000000,
    io:format("StartedTime = ~p~n", [StartedTime]),
    true = StartedTime < SleepSecs,
    erlang:system_flag(multi_scheduling, block_normal),
    lists:foreach(fun (P) -> receive {P, done} -> ok end end, Procs),
    DoneTime = (erlang:monotonic_time(microsecond) - Start)/1000000,
    io:format("DoneTime = ~p~n", [DoneTime]),
    true = DoneTime > SleepSecs,
    ok = verify_multi_scheduling_blocked(),
    erlang:system_flag(multi_scheduling, unblock_normal),
    case {length(lists:usort(lists:flatten(SIds))), NoSchedsOnln} of
        {N, N} ->
            ok;
        {N, M} ->
            ct:fail("Failed to create ports on all ~w available"
                    "schedulers. Only created ports on ~w schedulers.", [M, N])
    end.

save_sid(SIds) ->
    SId = erlang:system_info(scheduler_id),
    case lists:member(SId, SIds) of
        true -> SIds;
        false -> [SId|SIds]
    end.

sid_proc(SIds) ->
    NewSIds = save_sid(SIds),
    receive
        {From, want_sids} ->
            From ! {self(), sids, NewSIds}
    after 0 ->
              sid_proc(NewSIds)
    end.

verify_multi_scheduling_blocked() ->
    Procs = lists:map(fun (_) ->
                              spawn_link(fun () -> sid_proc([]) end)
                      end,
                      lists:seq(1, 3*erlang:system_info(schedulers_online))),
    receive after 1000 -> ok end,
    SIds = lists:map(fun (P) ->
                             P ! {self(), want_sids},
                             receive {P, sids, PSIds} -> PSIds end
                     end,
                     Procs),
    1 = length(lists:usort(lists:flatten(SIds))),
    ok.


%%% Pinging functions.

stream_ping(Config, Size, CmdLine, Options) ->
    Data = random_packet(Size),
    port_expect(Config, [{Data, [Data]}], 0, CmdLine, Options).

ping(Config, Sizes, HSize, CmdLine, Options) ->
    Actions = lists:map(fun(Size) ->
                                [$p|Packet] = random_packet(Size, "ping"),
                                {[$p|Packet], [[$P|Packet]]}
                        end,
                        Sizes),
    port_expect(Config, Actions, HSize, CmdLine, Options).

%% expect_input(Sizes, HSize, CmdLine, Options)
%%
%% Sizes = Size of packets to generated.
%% HSize = Header size: 1, 2, or 4
%% CmdLine = Additional command line options.
%% Options = Additional port options.

expect_input(Config, Sizes, HSize, CmdLine, Options) ->
    expect_input1(Config, Sizes, {HSize, CmdLine, Options}, [], []).

expect_input1(Config, [0|Rest], Params, Expect, ReplyCommand) ->
    expect_input1(Config, Rest, Params, [""|Expect], ["x0"|ReplyCommand]);
expect_input1(Config, [Size|Rest], Params, Expect, ReplyCommand) ->
    Packet = random_packet(Size),
    Fmt = io_lib:format("~c~p", [hd(Packet), Size]),
    expect_input1(Config, Rest, Params, [Packet|Expect], [Fmt|ReplyCommand]);
expect_input1(Config, [], {HSize, CmdLine0, Options}, Expect, ReplyCommand) ->
    CmdLine = build_cmd_line(CmdLine0, ReplyCommand, []),
    port_expect(Config, [{false, lists:reverse(Expect)}],
                HSize, CmdLine, Options).

build_cmd_line(FixedCmdLine, [Cmd|Rest], []) ->
    build_cmd_line(FixedCmdLine, Rest, [Cmd]);
build_cmd_line(FixedCmdLine, [Cmd|Rest], Result) ->
    build_cmd_line(FixedCmdLine, Rest, [Cmd, $:|Result]);
build_cmd_line(FixedCmdLine, [], Result) ->
    lists:flatten([FixedCmdLine, " -r", Result, " -n"]).

%% port_expect(Actions, HSize, CmdLine, Options)
%%
%% Actions = [{Send, ExpectList}|Rest]
%% HSize = 0 (stream), or 1, 2, 4   (header size aka "packet bytes")
%% CmdLine = Command line for port_test.  Don't include -h<digit>.
%% Options = Options for open_port/2.  Don't include {packet, Number} or
%%           or stream.
%%
%% Send = false | list()
%% ExpectList = List of lists or binaries.
%%
%% Returns the port.

port_expect(Config, Actions, HSize, CmdLine, Options0) ->
    %    io:format("port_expect(~p, ~p, ~p, ~p)",
    %		[Actions, HSize, CmdLine, Options0]),
    PortTest = port_test(Config),
    Cmd = lists:concat([PortTest, " -h", HSize, " ", CmdLine]),
    PortType =
    case HSize of
        0 -> stream;
        _ -> {packet, HSize}
    end,
    Options = [PortType|Options0],
    io:format("open_port({spawn, ~p}, ~p)", [Cmd, Options]),
    Port = open_port({spawn, Cmd}, Options),
    port_expect(Port, Actions, Options),
    Port.

port_expect(Port, [{Send, Expects}|Rest], Options) when is_list(Expects) ->
    port_send(Port, Send),
    IsBinaryPort = lists:member(binary, Options),
    Receiver =
    case {lists:member(stream, Options), line_option(Options)} of
        {false, _} -> fun receive_all/2;
        {true,false}  -> fun stream_receive_all/2;
        {_, true} -> fun receive_all/2
    end,
    Receiver(Port, maybe_to_binary(Expects, IsBinaryPort)),
    port_expect(Port, Rest, Options);
port_expect(_, [], _) ->
    ok.

%%% Check for either line or {line,N} in option list
line_option([{line,_}|_]) ->
    true;
line_option([line|_]) ->
    true;
line_option([_|T]) ->
    line_option(T);
line_option([]) ->
    false.

any_list_to_binary({Atom, List}) ->
    {Atom, list_to_binary(List)};
any_list_to_binary(List) ->
    list_to_binary(List).

maybe_to_binary(Expects, true) ->
    lists:map(fun any_list_to_binary/1, Expects);
maybe_to_binary(Expects, false) ->
    Expects.

port_send(_Port, false) -> ok;
port_send(Port, Send) when is_list(Send) ->
    %    io:format("port_send(~p, ~p)", [Port, Send]),
    Port ! {self(), {command, Send}}.

receive_all(Port, [Expect|Rest]) ->
    %    io:format("receive_all(~p, [~p|Rest])", [Port, Expect]),
    receive
        {Port, {data, Expect}} ->
            io:format("Received ~s", [format(Expect)]),
            ok;
        {Port, {data, Other}} ->
            io:format("Received ~s; expected ~s",
                      [format(Other), format(Expect)]),
            ct:fail(bad_message);
        Other ->
            %% (We're not yet prepared for receiving both 'eol' and
            %% 'exit_status'; remember that they may appear in any order.)
            case {Expect, Rest, Other} of
                {eof, [], {Port, eof}} ->
                    io:format("Received soft EOF.",[]),
                    ok;
                {{exit_status, S}, [], {Port, {exit_status, S}}} ->
                    io:format("Received exit status ~p.",[S]),
                    ok;
                _ ->
                    %%%	            io:format("Unexpected message: ~s", [format(Other)]),
                    io:format("Unexpected message: ~w", [Other]),
                    ct:fail(unexpected_message)
            end
    end,
    receive_all(Port, Rest);
receive_all(_Port, []) ->
    ok.

stream_receive_all(Port, [Expect]) ->
    stream_receive_all1(Port, Expect).

stream_receive_all1(_Port, Empty) when is_binary(Empty), size(Empty) == 0 ->
    ok;
stream_receive_all1(_Port, []) ->
    ok;
stream_receive_all1(Port, Expect) ->
    receive
        {Port, {data, Data}} ->
            Remaining = compare(Data, Expect),
            stream_receive_all1(Port, Remaining);
        Other ->
            ct:fail({bad_message, Other})
    end.

compare(B1, B2) when is_binary(B1), is_binary(B2), byte_size(B1) =< byte_size(B2) ->
    case split_binary(B2, size(B1)) of
        {B1,Remaining} ->
            Remaining;
        _Other ->
            ct:fail(nomatch)
    end;
compare(B1, B2) when is_binary(B1), is_binary(B2) ->
    ct:fail(too_much_data);
compare([X|Rest1], [X|Rest2]) ->
    compare(Rest1, Rest2);
compare([_|_], [_|_]) ->
    ct:fail(nomatch);
compare([], Remaining) ->
    Remaining;
compare(_Data, []) ->
    ct:fail(too_much_data).

maybe_to_list(Bin) when is_binary(Bin) ->
    binary_to_list(Bin);
maybe_to_list(List) ->
    List.

format({Eol,List}) ->
    io_lib:format("tuple<~w,~w>",[Eol, maybe_to_list(List)]);
format(List) when is_list(List) ->
    case list_at_least(50, List) of
        true ->
            io_lib:format("\"~-50s...\"", [List]);
        false ->
            io_lib:format("~p", [List])
    end;
format(Bin) when is_binary(Bin), size(Bin) >= 50 ->
    io_lib:format("binary<~-50s...>", [binary_to_list(Bin, 1, 50)]);
format(Bin) when is_binary(Bin) ->
    io_lib:format("binary<~s>", [binary_to_list(Bin)]).


list_at_least(Number, [_|Rest]) when Number > 0 ->
    list_at_least(Number-1, Rest);
list_at_least(Number, []) when Number > 0 ->
    false;
list_at_least(0, _List) -> true.


%%% Utility functions.

random_packet(Size) ->
    random_packet(Size, "").

random_packet(Size, Prefix) ->
    build_packet(Size-length(Prefix), lists:reverse(Prefix), random_char()).

build_packet(0, Result, _NextChar) ->
    lists:reverse(Result);
build_packet(Left, Result, NextChar0) ->
    NextChar =
    if
        NextChar0 >= 126 ->
            33;
        true ->
            NextChar0+1
    end,
    build_packet(Left-1, [NextChar0|Result], NextChar).

sizes() ->
    [10, 13, 64, 127, 128, 255, 256, 1023, 1024,
     32767, 32768, 65535, 65536].

sizes(Header_Size) ->
    sizes(Header_Size, sizes(), []).

sizes(1, [Packet_Size|Rest], Result) when Packet_Size < 256 ->
    sizes(1, Rest, [Packet_Size|Result]);
sizes(2, [Packet_Size|Rest], Result) when Packet_Size < 65536 ->
    sizes(2, Rest, [Packet_Size|Result]);
sizes(4, [Packet_Size|Rest], Result) ->
    sizes(4, Rest, [Packet_Size|Result]);
sizes(_, _, Result) ->
    Result.

random_char() ->
    random_char("abcdefghijklmnopqrstuvxyzABCDEFGHIJKLMNOPQRSTUVXYZ0123456789").

random_char(Chars) ->
    lists:nth(uniform(length(Chars)), Chars).

uniform(N) ->
    case rand:export_seed() of
        undefined ->
            rand:seed(exsplus),
            io:format("Random seed = ~p\n", [rand:export_seed()]);
        _ ->
            ok
    end,
    rand:uniform(N).

fun_spawn(Fun) ->
    fun_spawn(Fun, []).

fun_spawn(Fun, Args) ->
    spawn_link(erlang, apply, [Fun, Args]).

port_test(Config) when is_list(Config) ->
    filename:join(proplists:get_value(data_dir, Config), "port_test").

%% Test that erlang:ports/0 returns a consistent snapshot of ports
ports(Config) when is_list(Config) ->
    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "exit_drv"),

    receive after 1000 -> ok end, % Wait for other ports to stabilize

    OtherPorts = erlang:ports(),
    io:format("Other ports: ~p\n",[OtherPorts]),
    MaxPorts = 1024 - length(OtherPorts),

    TrafficPid = spawn_link(fun() -> ports_traffic(MaxPorts) end),

    ports_snapshots(100, TrafficPid, OtherPorts),
    TrafficPid ! {self(),die},
    receive {TrafficPid, dead} -> ok end,
    ok.

ports_snapshots(0, _, _) ->
    ok;
ports_snapshots(Iter, TrafficPid, OtherPorts) ->

    TrafficPid ! start,
    receive after 1 -> ok end,

    Snapshot = erlang:ports(),

    TrafficPid ! {self(), stop},
    receive {TrafficPid, EventList, TrafficPorts} -> ok end,

    %%io:format("Snapshot=~p\n", [Snapshot]),
    ports_verify(Snapshot, OtherPorts ++ TrafficPorts, EventList),

    ports_snapshots(Iter-1, TrafficPid, OtherPorts).


ports_traffic(MaxPorts) ->
    ports_traffic_stopped(MaxPorts, {[],0}).

ports_traffic_stopped(MaxPorts, {PortList, PortCnt}) ->
    receive
        start ->
            %%io:format("Traffic started in ~p\n",[self()]),
            ports_traffic_started(MaxPorts, {PortList, PortCnt}, []);
        {Pid,die} ->
            lists:foreach(fun(Port)-> erlang:port_close(Port) end,
                          PortList),
            Pid ! {self(),dead}
    end.

ports_traffic_started(MaxPorts, {PortList, PortCnt}, EventList) ->
    receive
        {Pid, stop} ->
            %%io:format("Traffic stopped in ~p\n",[self()]),
            Pid ! {self(), EventList, PortList},
            ports_traffic_stopped(MaxPorts, {PortList, PortCnt})

    after 0 ->
              ports_traffic_do(MaxPorts, {PortList, PortCnt}, EventList)
    end.

ports_traffic_do(MaxPorts, {PortList, PortCnt}, EventList) ->
    N = uniform(MaxPorts),
    case N > PortCnt of
        true -> % Open port
            P = open_port({spawn, "exit_drv"}, []),
            %%io:format("Created port ~p\n",[P]),
            ports_traffic_started(MaxPorts, {[P|PortList], PortCnt+1},
                                  [{open,P}|EventList]);

        false -> % Close port
            P = lists:nth(N, PortList),
            %%io:format("Close port ~p\n",[P]),
            true = erlang:port_close(P),
            ports_traffic_started(MaxPorts, {lists:delete(P,PortList), PortCnt-1},
                                  [{close,P}|EventList])
    end.

ports_verify(Ports, PortsAfter, EventList) ->
    %%io:format("Candidate=~p\nEvents=~p\n", [PortsAfter, EventList]),
    case lists:sort(Ports) =:= lists:sort(PortsAfter) of
        true ->
            io:format("Snapshot of ~p ports verified ok.\n",[length(Ports)]),
            ok;
        false ->
            %% Note that we track the event list "backwards", undoing open/close:
            case EventList of
                [{open,P} | Tail] ->
                    ports_verify(Ports, lists:delete(P,PortsAfter), Tail);

                [{close,P} | Tail] ->
                    ports_verify(Ports, [P | PortsAfter], Tail);

                [] ->
                    ct:fail("Inconsistent snapshot from erlang:ports()")
            end
    end.

load_driver(Dir, Driver) ->
    case erl_ddll:load_driver(Dir, Driver) of
        ok -> ok;
        {error, Error} = Res ->
            io:format("~s\n", [erl_ddll:format_error(Error)]),
            Res
    end.


%% Send data to port program that does not read it, then close port.
%% Primary targeting Windows to test threaded_handle_closer in sys.c
close_deaf_port(Config) when is_list(Config) ->
    ct:timetrap({minutes, 2}),
    DataDir = proplists:get_value(data_dir, Config),
    DeadPort = os:find_executable("dead_port", DataDir),
    Port = open_port({spawn,DeadPort++" 60"},[]),
    erlang:port_command(Port,"Hello, can you hear me!?!?"),
    port_close(Port),

    Res = close_deaf_port_1(0, DeadPort),
    io:format("Waiting for OS procs to terminate...\n"),
    receive after 5*1000 -> ok end,
    Res.

close_deaf_port_1(200, _) ->
    ok;
close_deaf_port_1(N, Cmd) ->
    Timeout = integer_to_list(rand:uniform(5*1000)),
    try open_port({spawn_executable,Cmd},[{args,[Timeout]}]) of
        Port ->
            erlang:port_command(Port,"Hello, can you hear me!?!?"),
            port_close(Port),
            close_deaf_port_1(N+1, Cmd)
    catch
        _:eagain ->
            {comment, "Could not spawn more than " ++ integer_to_list(N) ++ " OS processes."}
    end.

%% Test undocumented port_set_data/2 and port_get_data/1
%% Hammer from multiple processes a while
%% and then abrubtly close the port (OTP-12208).
port_setget_data(Config) when is_list(Config) ->
    ok = load_driver(proplists:get_value(data_dir, Config), "echo_drv"),
    Port = erlang:open_port({spawn_driver, "echo_drv"}, []),

    NSched = erlang:system_info(schedulers_online),
    HeapData = {1,2,3,<<"A heap binary">>,fun()->"This is fun"end,
                list_to_binary(lists:seq(1,100))},
    PRs = lists:map(fun(I) ->
                            spawn_opt(fun() -> port_setget_data_hammer(Port,HeapData,false,1) end,
                                      [monitor, {scheduler, I rem NSched}])
                    end,
                    lists:seq(1,10)),
    receive after 100 -> ok end,
    Papa = self(),
    lists:foreach(fun({Pid,_}) -> Pid ! {Papa,prepare_for_close} end, PRs),
    lists:foreach(fun({Pid,_}) ->
                          receive {Pid,prepare_for_close} -> ok end
                  end,
                  PRs),
    port_close(Port),
    lists:foreach(fun({Pid,Ref}) ->
                          receive {'DOWN', Ref, process, Pid, normal} -> ok end
                  end,
                  PRs),
    ok.

port_setget_data_hammer(Port, HeapData, IsSet0, N) ->
    Rand = rand:uniform(3),
    IsSet1 = try case Rand of
                     1 -> true = erlang:port_set_data(Port, atom), true;
                     2 -> true = erlang:port_set_data(Port, HeapData), true;
                     3 -> case erlang:port_get_data(Port) of
                              atom -> true;
                              HeapData -> true;
                              undefined -> false=IsSet0
                          end
                 end
             catch
                 error:badarg ->
                     true = get(prepare_for_close),
                     io:format("~p did ~p rounds before port closed\n", [self(), N]),
                     exit(normal)
             end,
    receive {Papa, prepare_for_close} ->
                put(prepare_for_close, true),
                Papa ! {self(),prepare_for_close}
    after 0 ->
              ok
    end,
    port_setget_data_hammer(Port, HeapData, IsSet1, N+1).


wait_until(Fun) ->
    case catch Fun() of
        true ->
            ok;
        _ ->
            receive after 100 -> ok end,
            wait_until(Fun)
    end.

%% Attempt to monitor pid as port, and port as pid
mon_port_invalid_type(_Config) ->
    Port = hd(erlang:ports()),
    ?assertError(badarg, erlang:monitor(port, self())),
    ?assertError(badarg, erlang:monitor(process, Port)),
    ok.

%% With local port
mon_port_local(Config) ->
    Port1 = create_port(Config, ["-h1", "-q"]), % will close after we send 1 byte
    Ref1 = erlang:monitor(port, Port1),
    ?assertMatch({proc_monitors, true, port_monitored_by, true},
                 port_is_monitored(self(), Port1)),
    Port1 ! {self(), {command, <<"1">>}}, % port test will close self immediately
    receive ExitP1 -> ?assertMatch({'DOWN', Ref1, port, Port1, _}, ExitP1)
    after 1000 -> ?assert(false) end,
    ?assertMatch({proc_monitors, false, port_monitored_by, false},
                 port_is_monitored(self(), Port1)),

    %% Trying to re-monitor a port which exists but is not healthy will
    %% succeed but then will immediately send DOWN
    Ref2 = erlang:monitor(port, Port1),
    receive ExitP2 -> ?assertMatch({'DOWN', Ref2, port, Port1, _}, ExitP2)
    after 1000 -> ?assert(false) end,
    ok.

%% With remote port on remote node (should fail)
mon_port_remote_on_remote(_Config) ->
    Port3 = binary_to_term(<<131, 102,          % Ext term format: PORT_EXT
                             100, 0, 13, "fgsfds@fgsfds", % Node :: ATOM_EXT
                             1:32/big,          % Id
                             0>>),              % Creation
    ?assertError(badarg, erlang:monitor(port, Port3)),
    ok.

%% Remote port belongs to this node and does not exist
%% Port4 produces #Port<0.167772160> which should not exist in a test run
mon_port_bad_remote_on_local(_Config) ->
    Port4 = binary_to_term(<<131, 102,          % Ext term format: PORT_EXT
                             100, 0, 13, "nonode@nohost", % Node
                             167772160:32/big,  % Id
                             0>>),              % Creation
    ?assertError(badarg, erlang:monitor(port, Port4)),
    ok.

%% Monitor owner (origin) dies before port is closed
mon_port_origin_dies(Config) ->
    Port5 = create_port(Config, ["-h1", "-q"]), % will close after we send 1 byte
    Self5 = self(),
    Proc5 = spawn(fun() ->
                      Self5 ! test5_started,
                      erlang:monitor(port, Port5),
                      receive stop -> ok end
                  end),
    erlang:monitor(process, Proc5), % we want to sync with its death
    receive test5_started -> ok
    after 1000 -> ?assert(false) end,
    ?assertMatch({proc_monitors, true, port_monitored_by, true},
                 port_is_monitored(Proc5, Port5)),
    Proc5 ! stop,
    % receive from monitor (removing race condition)
    receive ExitP5 -> ?assertMatch({'DOWN', _, process, Proc5, _}, ExitP5)
    after 1000 -> ?assert(false) end,
    ?assertMatch({proc_monitors, false, port_monitored_by, false},
                 port_is_monitored(Proc5, Port5)),
    Port5 ! {self(), {command, <<"1">>}}, % make port quit
    ok.

%% Port and Monitor owner dies before port is closed
%% This testcase checks for a regression memory leak in erts
%% when the controlling and monitoring process is the same process
%% and the process dies
mon_port_owner_dies(Config) ->
    Self = self(),
    Proc = spawn(fun() ->
                         Port = create_port(Config, ["-h1", "-q"]),
                         Self ! {test_started, Port},
                         erlang:monitor(port, Port),
                         receive stop -> ok end
                  end),
    erlang:monitor(process, Proc), % we want to sync with its death
    Port = receive {test_started,P} -> P
    after 1000 -> ?assert(false) end,
    ?assertMatch({proc_monitors, true, port_monitored_by, true},
                 port_is_monitored(Proc, Port)),
    Proc ! stop,
    %% receive from monitor
    receive ExitP5 -> ?assertMatch({'DOWN', _, process, Proc, _}, ExitP5)
    after 1000 -> ?assert(false) end,
    ok.

%% Monitor a named port
mon_port_named(Config) ->
    Name6 = test_port6,
    Port6 = create_port(Config, ["-h1", "-q"]), % will close after we send 1 byte
    erlang:register(Name6, Port6),
    erlang:monitor(port, Name6),
    ?assertMatch({proc_monitors, true, port_monitored_by, true},
                 port_is_monitored(self(), Name6)),
    Port6 ! {self(), {command, <<"1">>}}, % port test will close self immediately
    receive ExitP6 -> ?assertMatch({'DOWN', _, port, {Name6, _}, _}, ExitP6)
    after 1000 -> ?assert(false) end,
    ?assertMatch({proc_monitors, false, port_monitored_by, false},
                 port_is_monitored(self(), Name6)),
    ok.

%% Named does not exist: Should succeed but immediately send 'DOWN'
mon_port_bad_named(_Config) ->
    Name7 = test_port7,
    erlang:monitor(port, Name7),
    receive {'DOWN', _, port, {Name7, _}, noproc} -> ok
    after 1000 -> ?assert(false) end,
    ok.

%% Monitor a pid and demonitor by ref
mon_port_pid_demonitor(Config) ->
    Port8 = create_port(Config, ["-h1", "-q"]), % will close after we send 1 byte
    Ref8 = erlang:monitor(port, Port8),
    ?assertMatch({proc_monitors, true, port_monitored_by, true},
                 port_is_monitored(self(), Port8)),
    erlang:demonitor(Ref8),
    ?assertMatch({proc_monitors, false, port_monitored_by, false},
                 port_is_monitored(self(), Port8)),
    Port8 ! {self(), {command, <<"1">>}}, % port test will close self immediately
    ok.

%% Monitor by name and demonitor by ref
mon_port_name_demonitor(Config) ->
    Name9 = test_port9,
    Port9 = create_port(Config, ["-h1", "-q"]), % will close after we send 1 byte
    erlang:register(Name9, Port9),
    Ref9 = erlang:monitor(port, Name9),
    ?assertMatch({proc_monitors, true, port_monitored_by, true},
                 port_is_monitored(self(), Name9)),
    erlang:demonitor(Ref9),
    ?assertMatch({proc_monitors, false, port_monitored_by, false},
                 port_is_monitored(self(), Name9)),
    Port9 ! {self(), {command, <<"1">>}}, % port test will close self immediately
    ok.

%% 1. Spawn a port which will sleep 3 seconds
%% 2. Port driver and dies horribly (via C driver_failure call). This should
%%    mark port as exiting or something.
%% 3. While the command happens, a monitor is requested on the port
mon_port_driver_die(Config) ->
    erlang:process_flag(scheduler, 1),

    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "sleep_failure_drv"),
    Port = open_port({spawn, "sleep_failure_drv"}, []),

    Self = self(),
    erlang:spawn_opt(fun() ->
                             timer:sleep(250),
                             Ref = erlang:monitor(port, Port),
                             %% Now check that msg actually arrives
                             receive
                                 {'DOWN', Ref, _Port2, _, _} = M -> Self ! M
                             after 3000 -> Self ! no_down_message
                             end
                     end,[{scheduler, 2}]),
    Port ! {self(), {command, "Fail, please!"}},
    receive
        A when is_atom(A) -> ?assertEqual(A, 'A_should_be_printed');
        {'DOWN', _R, port, Port, noproc} -> ok;
        {'DOWN', _R, _P, _, _} = M -> ct:fail({got_wrong_down,M})
    after 5000 -> ?assert(false)
    end,
    ok.


%% 1. Spawn a port which will sleep 3 seconds
%% 2. Monitor port
%% 3. Port driver and dies horribly (via C driver_failure call). This should
%%    mark port as exiting or something.
%% 4. While the command happens, a demonitor is requested on the port
mon_port_driver_die_demonitor(Config) ->
    erlang:process_flag(scheduler, 1),

    Path = proplists:get_value(data_dir, Config),
    ok = load_driver(Path, "sleep_failure_drv"),
    Port = open_port({spawn, "sleep_failure_drv"}, []),

    Self = self(),
    erlang:spawn_opt(
      fun() ->
              Ref = erlang:monitor(port, Port),
              Self ! Ref,
              timer:sleep(250),
              erlang:demonitor(Ref),
              %% Now check that msg still arrives,
              %% the demon should have arrived after
              %% the port exited
              receive
                  {'DOWN', Ref, _Port2, _, _} = M -> Self ! M
              after 3000 -> Self ! no_down_message
              end
      end,[{scheduler, 2}]),
    Ref = receive R -> R end,
    Port ! {self(), {command, "Fail, please!"}},
    receive
        {'DOWN', Ref, port, Port, normal} -> ok;
        {'DOWN', _R, _P, _, _} = M -> ct:fail({got_wrong_down,M})
    after 5000 -> ?assert(false)
    end,
    ok.

%% @doc Makes a controllable port for testing. Underlying mechanism of this
%% port is not important, only important is our ability to close/kill it or
%% have it monitored.
create_port(Config, Args) ->
    DataDir = ?config(data_dir, Config),
    %% Borrow port test utility from port SUITE
    Program = filename:join([DataDir, "port_test"]),
    erlang:open_port({spawn_executable, Program}, [{args, Args}]).

%% @doc Checks if process Pid exists, and if so, if its monitoring (or not)
%% the Port (or if port doesn't exist, we assume answer is no).
port_is_monitored(Pid, Port) when is_pid(Pid), is_port(Port) ->
    %% Variant for when port is a port id (port())
    A = case erlang:process_info(Pid, monitors) of
            undefined -> false;
            {monitors, ProcMTargets} -> lists:member({port, Port}, ProcMTargets)
        end,
    B = case erlang:port_info(Port, monitored_by) of
            undefined -> false;
            {monitored_by, PortMonitors} -> lists:member(Pid, PortMonitors)
        end,
    {proc_monitors, A, port_monitored_by, B};
port_is_monitored(Pid, PortName) when is_pid(Pid), is_atom(PortName) ->
    %% Variant for when port is an atom
    A = case erlang:process_info(Pid, monitors) of
        undefined -> false;
        {monitors, ProcMTargets} ->
            lists:member({port, {PortName, node()}}, ProcMTargets)
    end,
    B = case erlang:whereis(PortName) of
            undefined -> false; % name is not registered or is dead
            PortId ->
                case erlang:port_info(PortId, monitored_by) of
                    undefined -> false; % is dead
                    {monitored_by, PortMonitors} ->
                        lists:member(Pid, PortMonitors)
                end
        end,
    {proc_monitors, A, port_monitored_by, B}.