path: root/erts/etc/unix/etp-commands.in

#
# %CopyrightBegin%
# 
# Copyright Ericsson AB 2005-2017. All Rights Reserved.
# 
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# 
# %CopyrightEnd%
#

############################################################################
# Help commands
# 

define etp-help
  help etp-help
end

document etp-help
%---------------------------------------------------------------------------
% etp-help
% 
% Same as "help etp-help"
% 
% Emulator Toolbox for Pathologists
% - GDB command toolbox for analyzing core dumps from the
% Erlang emulator (BEAM).
% 
% Should work for 32-bit erts-5.2/R9B, ...
% 
% The commands are prefixed with:
%   etp:  Acronym for erts-term-print
%   etpf: Acronym for erts-term-print-flat
% 
% User commands (these have help themselves):
% 
% Most useful:
%   etp, etpf
% 
% Useful for doing step-by-step traversal of lists and tuples after 
% calling the toplevel command etpf:
%   etpf-cons, etpf-boxed, 
% 
% Special commands for not really terms:
%   etp-mfa, etp-cp, etp-disasm,
%   etp-msgq, etpf-msgq, 
%   etp-stacktrace, etp-stackdump, etpf-stackdump, etp-dictdump
%   etp-process-info, etp-process-memory-info
%   etp-port-info, etp-port-state, etp-port-sched-flags
%   etp-heapdump, etp-offheapdump, etpf-offheapdump,
%   etp-search-heaps, etp-search-alloc,
%   etp-ets-tables, etp-ets-tabledump
%
% Complex commands that use the Erlang support module.
%   etp-overlapped-heaps, etp-chart, etp-chart-start, etp-chart-end
%
% System inspection
%   etp-system-info, etp-schedulers, etp-process, etp-ports, etp-lc-dump,
%   etp-migration-info, etp-processes-memory,
%   etp-compile-info, etp-config-h-info
%
% Platform specific (when gdb fails you)
%   etp-ppc-stacktrace
%
% Erlang support module handling commands:
%   etp-run
%
% Parameter handling commands:
%   etp-show, etp-set-max-depth, etp-set-max-string-length
% 
% Other commands you may find in this toolbox are suffixed -1, -2, ...
% and are internal; not for the console user.
% 
% The Erlang support module requires `erl' and `erlc' in the path.
% The compiled "erl_commands.beam" file is stored in the current
% working directory, so it is thereby in the search path of `erl'.
% 
% These are just helpful commands when analyzing core dumps, but
% you will not get away without knowing the gory details of the
% tag bits. Do not forget about the e.g p, p/x, x and x/4x commands.
%
% Execution speed of user defined gdb commands is not lightning fast.
% It may well take half a minute to dump a complex term with the default
% max depth values on our old Sparc Ultra-10's.
%
% To use the Erlang support module, the environment variable ROOTDIR
% must be set to the toplevel installation directory of Erlang/OTP,
% so the etp-commands file becomes:
%     $ROOTDIR/erts/etc/unix/etp-commands
% Also, erl and erlc must be in the path.
%---------------------------------------------------------------------------
end

############################################################################
# Toplevel commands
# 

define etp
# Args: Eterm
#
# Reentrant
#
  etp-1 ((Eterm)($arg0)) 0
  printf ".\n"
end

document etp
%---------------------------------------------------------------------------
% etp Eterm
% 
% Takes a toplevel Erlang term and prints the whole deep term
% very much as in Erlang itself. Up to a max depth. See etp-show.
%---------------------------------------------------------------------------
end

define etp-1
# Args: Eterm, int depth
#
# Reentrant
#
  if (($arg0) & 0x3) == 1
    # Cons pointer
    if $etp_flat
      printf "<etpf-cons %#x>", ($arg0)
    else
      etp-list-1 ($arg0) ($arg1)
    end
  else
    if (($arg0) & 0x3) == 2
      if $etp_flat
        printf "<etpf-boxed %#x>", ($arg0)
      else
        etp-boxed-1 ($arg0) ($arg1)
      end
    else
      if (($arg0) & 0x3) == 3
        etp-immediate-1 ($arg0)
      else
        # (($arg0) & 0x3) == 0
        if (($arg0) == etp_the_non_value)
          printf "<the non-value>"
        else
          etp-cp-1 ($arg0)
        end
      end
    end
  end
end

define etpf
# Args: Eterm
#
# Non-reentrant
  set $etp_flat = 1
  etp-1 ((Eterm)($arg0))
  set $etp_flat = 0
  printf ".\n"
end

document etpf
%---------------------------------------------------------------------------
% etpf Eterm
% 
% Takes a toplevel Erlang term and prints it is. If it is a deep term 
% print which command to use to traverse down one level.
%---------------------------------------------------------------------------
end

############################################################################
# Commands for nested terms. Some are recursive.
#

define etp-list-1
# Args: Eterm cons_cell, int depth
#
# Reentrant
#
  if (($arg0) & 0x3) != 0x1
    printf "#NotCons<%#x>", ($arg0)
  else
    # Cons pointer
    if $etp_chart
      etp-chart-entry-1 ($arg0) ($arg1) 2
    end
    etp-list-printable-1 ($arg0) ($arg1)
    if !$etp_list_printable
      # Print normal list
      printf "["
      etp-list-2 ($arg0) (($arg1)+1)
    end
  end
end

define etp-list-printable-1
# Args: Eterm list, int depth
#
# Non-reentrant
#
# Returns: $etp_list_printable
#
  if (($arg0) & 0x3) != 0x1
    printf "#NotCons<%#x>", ($arg0)
  else
    # Loop to check if it is a printable string
    set $etp_list_p = ($arg0)
    set $etp_list_printable = ($etp_list_p != $etp_nil)
    set $etp_list_i = 0
    while ($etp_list_p != $etp_nil) && \
          ($etp_list_i < $etp_max_string_length) && \
          $etp_list_printable
      if ($etp_list_p & 0x3) == 0x1
        # Cons pointer
        set $etp_list_n = ((Eterm*)($etp_list_p & ~0x3))[0]
        if ($etp_list_n & 0xF) == 0xF
          etp-ct-printable-1 ($etp_list_n>>4)
          if $etp_ct_printable
            # Printable
            set $etp_list_p = ((Eterm*)($etp_list_p & ~0x3))[1]
            set $etp_list_i++
          else
            set $etp_list_printable = 0
          end
        else
          set $etp_list_printable = 0
        end
      else
        set $etp_list_printable = 0
      end
    end
    #
    if $etp_list_printable
  	# Print printable string
  	printf "\""
      set $etp_list_p = ($arg0)
      set $etp_list_i = 0
      while $etp_list_p != $etp_nil
        set $etp_list_n = ((Eterm*)($etp_list_p & ~0x3))[0]
        etp-char-1 ($etp_list_n>>4) '"'
        set $etp_list_p = ((Eterm*)($etp_list_p & ~0x3))[1]
        set $etp_list_i++
        if $etp_list_p == $etp_nil
          printf "\""
        else
          if $etp_list_i >= $etp_max_string_length
            set $etp_list_p = $etp_nil
            printf "\"++[...]"
          else
            if $etp_chart
              etp-chart-entry-1 ($arg0) (($arg1)+$etp_list_i) 2
            end
          end
        end
      end
    end
  end
end

define etp-list-2
# Args: Eterm cons_cell, int depth
#
# Reentrant
#
  if (($arg0) & 0x3) != 0x1
    printf "#NotCons<%#x>", ($arg0)
  else
    # Cons pointer
    if ($arg1) >= $etp_max_depth
      printf "...]"
    else
      etp-1 (((Eterm*)(($arg0)&~0x3))[0]) (($arg1)+1)
      if ((Eterm*)(($arg0) & ~0x3))[1] == $etp_nil
        # Tail is []
        printf "]"
      else
        if $etp_chart
          etp-chart-entry-1 ($arg0) ($arg1) 2
        end
        if (((Eterm*)(($arg0)&~0x3))[1]&0x3) == 0x1
          # Tail is cons cell
          printf ","
          etp-list-2 (((Eterm*)(($arg0)&~0x3))[1]) (($arg1)+1)
        else
          # Tail is other term
          printf "|"
          etp-1 (((Eterm*)(($arg0)&~0x3))[1]) (($arg1)+1)
          printf "]"
        end
      end
    end
  end
end

define etpf-cons
# Args: Eterm
#
# Reentrant capable
#
  if ((Eterm)($arg0) & 0x3) != 0x1
    printf "#NotCons<%#x>", ($arg0)
  else
    # Cons pointer
    set $etp_flat = 1
    printf "["
    etp-1 (((Eterm*)((Eterm)($arg0)&~0x3))[0])
    printf "|"
    etp-1 (((Eterm*)((Eterm)($arg0)&~0x3))[1])
    printf "]\n"
    set $etp_flat = 0
  end
end

document etpf-cons
%---------------------------------------------------------------------------
% etpf-cons Eterm
% 
% Takes a Cons ptr and prints the Car and Cdr cells with etpf (flat).
%---------------------------------------------------------------------------
end



define etp-boxed-1
# Args: Eterm, int depth
#
# Reentrant
#
  if (($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", ($arg0)
  else
    if (((Eterm*)(($arg0) & ~0x3))[0] & 0x3) != 0x0
      if $etp_chart
        etp-chart-entry-1 (($arg0)&~0x3) ($arg1) 1
      end
      printf "#BoxedError<%#x>", ($arg0)
    else
      if $etp_chart
        etp-chart-entry-1 (($arg0)&~0x3) ($arg1) \
                          ((((Eterm*)(($arg0)&~0x3))[0]>>6)+1)
      end
      if (((Eterm*)(($arg0) & ~0x3))[0] & 0x3f) == 0x0
        printf "{"
        etp-array-1 ((Eterm*)(($arg0)&~0x3)) ($arg1) ($arg1) \
                    1 ((((Eterm*)(($arg0)&~0x3))[0]>>6)+1) '}'
      else
        if (((Eterm*)(($arg0) & ~0x3))[0] & 0x3c) == 0x3c
	  # A map
	  if (((Eterm*)(($arg0) & ~0x3))[0] & 0xc0) == 0x0
	    # Flat map
	    printf "#{Keys:"
	    etp-1 ((flatmap_t*)(($arg0)&~0x3))->keys (($arg1)+1)
	    printf " Values:{"
	    etp-array-1 ((Eterm*)(($arg0)&~0x3)+3) ($arg1) ($arg1) \
                        0 ((flatmap_t*)(($arg0)&~0x3))->size '}'
	    printf "}"
          else
	    # Hashmap
            printf "#<%x>{", (((((Eterm*)(($arg0)&~0x3))[0])>>(6+2+8))&0xffff)
	    if (((Eterm*)(($arg0) & ~0x3))[0] & 0xc0) >= 0x80
              # head bitmap/array
	      etp-bitmap-array-1 ((Eterm*)(($arg0)&~0x3)+2) ($arg1) ($arg1) \
                        0 (((((Eterm*)(($arg0)&~0x3))[0])>>(6+2+8))&0xffff) '}'
            else
              # node bitmap
	      etp-bitmap-array-1 ((Eterm*)(($arg0)&~0x3)+1) ($arg1) ($arg1) \
                        0 (((((Eterm*)(($arg0)&~0x3))[0])>>(6+2+8))&0xffff) '}'
            end
	  end
        else
          etp-boxed-immediate-1 ($arg0)
        end
      end
    end
  end
end

define etp-boxed-immediate-1
# Args: Eterm, int depth
#
# Non-reentrant
#
  if (($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", ($arg0)
  else
    if (((Eterm*)(($arg0) & ~0x3))[0] & 0x3) != 0x0
      printf "#BoxedError<%#x>", ($arg0)
    else
      set $etp_boxed_immediate_p = (Eterm*)(($arg0) & ~0x3)
      set $etp_boxed_immediate_h = ($etp_boxed_immediate_p[0] >> 2) & 0xF
      if $etp_boxed_immediate_h == 0xC
        etp-extpid-1 ($arg0)
      else
        if $etp_boxed_immediate_h == 0xD
          etp-extport-1 ($arg0)
        else
          if ($etp_boxed_immediate_h == 0x2) || \
             ($etp_boxed_immediate_h == 0x3)
            etp-bignum-1 ($arg0)
          else
            if ($etp_boxed_immediate_h == 0x6)
              etp-float-1 ($arg0)
            else
              if ($etp_boxed_immediate_h == 0x4)
                etp-ref-1 ($arg0)
              else
                if ($etp_boxed_immediate_h == 0xE)
                  etp-extref-1 ($arg0)
                else
                  # Hexdump the rest
                  if ($etp_boxed_immediate_h == 0x5)
                    printf "#Fun<"
                  else
                    if ($etp_boxed_immediate_h == 0x8)
                      printf "#RefcBinary<"
                    else
                    if ($etp_boxed_immediate_h == 0x9)
                      printf "#HeapBinary<"
                    else
                    if ($etp_boxed_immediate_h == 0xA)
                      printf "#SubBinary<"
                    else
                      printf "#Header%X<", $etp_boxed_immediate_h
                    end
		  end
		  end
                  end
                  set $etp_boxed_immediate_arity = $etp_boxed_immediate_p[0]>>6
                  while $etp_boxed_immediate_arity > 0
                    set $etp_boxed_immediate_p++
                    if $etp_boxed_immediate_arity > 1
                      printf "%#x,", *$etp_boxed_immediate_p
                    else
                      printf "%#x", *$etp_boxed_immediate_p
        	      if ($etp_boxed_immediate_h == 0xA)
                        set $etp_boxed_immediate_p++
		    	printf ":%#x", *$etp_boxed_immediate_p
		      end
		      printf ">"
                    end
                    set $etp_boxed_immediate_arity--
                  end
                  # End of hexdump
                end
              end
            end
          end
        end
      end
    end
  end
end

define etpf-boxed
# Args: Eterm
#
# Non-reentrant
#
  set $etp_flat = 1
  etp-boxed-1 ((Eterm)($arg0)) 0
  set $etp_flat = 0
  printf ".\n"
end

document etpf-boxed
%---------------------------------------------------------------------------
% etpf-boxed Eterm
% 
% Take a Boxed ptr and print the contents in one level using etpf (flat).
%---------------------------------------------------------------------------
end



define etp-array-1
# Args: Eterm* p, int depth, int width, int pos, int size, int end_char
#
# Reentrant
#
  if ($arg3) < ($arg4)
    if (($arg1) < $etp_max_depth) && (($arg2) < $etp_max_depth)
      etp-1 (($arg0)[($arg3)]) (($arg1)+1)
      if (($arg3) + 1) != ($arg4)
        printf ","
      end
      etp-array-1 ($arg0) ($arg1) (($arg2)+1) (($arg3)+1) ($arg4) ($arg5)
    else
      printf "...%c", ($arg5)
    end
  else
    printf "%c", ($arg5)
  end
end

define etp-bitmap-array-1
# Args: Eterm* p, int depth, int width, int pos, int bitmap, int end_char
#
# Reentrant
#
# Same as etp-array-1 with size = bitcount(bitmap)
#
  if ($arg4) & 1 != 0
    if (($arg1) < $etp_max_depth) && (($arg2) < $etp_max_depth)
      etp-1 (($arg0)[($arg3)]) (($arg1)+1)
      if (($arg4) & (($arg4)-1)) != 0
        printf ","
      end
      etp-bitmap-array-1 ($arg0) ($arg1) (($arg2)+1) (($arg3)+1) (($arg4)>>1) ($arg5)
    else
      printf "...%c", ($arg5)
    end
  else
    if ($arg4) == 0
      printf "%c", ($arg5)
    else
      etp-bitmap-array-1 $arg0 $arg1 $arg2 $arg3 (($arg4)>>1) $arg5

      # WARNING: One might be tempted to optimize the bitcounting here
      # by passing the bitmap argument as ($arg4 & ($arg4 - 1)). This is a very
      # bad idea as arguments are passed as string substitution.
      # The size of $arg4 would thus grow exponentially for each recursion.
    end
  end
end


#define etpa-1
## Args: Eterm, int depth, int index, int arity
##
## Reentrant
##
#  if ($arg1) >= $etp_max_depth+$etp_max_string_length
#    printf "%% Max depth for term %d\n", $etp_chart_id
#  else
#    if ($arg2) < ($arg3)
#      etp-1 (((Eterm*)(($arg0)&~0x3))[$arg2]) (($arg1)+1)
#      etpa-1 ($arg0) (($arg1)+1) (($arg2)+1) ($arg3)
#    end
#  end
#end

############################################################################
# Commands for non-nested terms. Recursion leaves. Some call other leaves.
#

define etp-immediate-1
# Args: Eterm
#
# Reentrant capable
#
  if (($arg0) & 0x3) != 0x3
    printf "#NotImmediate<%#x>", ($arg0)
  else
    if (($arg0) & 0xF) == 0x3 
      etp-pid-1 ($arg0)
    else
      if (($arg0) & 0xF) == 0x7
        etp-port-1 ($arg0)
      else
        if (($arg0) & 0xF) == 0xf
          # Fixnum
          printf "%ld", (long)((Sint)($arg0)>>4)
        else
          # Immediate2  - 0xB
          if (($arg0) & 0x3f) == 0x0b
            etp-atom-1 ($arg0)
          else
            if (($arg0) & 0x3f) == 0x1b
              printf "#Catch<%d>", ($arg0)>>6
            else
              if (($arg0) == $etp_nil)
                printf "[]"
              else
                printf "#UnknownImmediate<%#x>", ($arg0)
              end
            end
          end
        end
      end
    end
  end
end



define etp-atom-1
# Args: Eterm atom
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3f) != 0xb
    printf "#NotAtom<%#x>", ($arg0)
  else
    set $etp_atom_1_ap = (Atom*)erts_atom_table.seg_table[(Eterm)($arg0)>>16][((Eterm)($arg0)>>6)&0x3FF]
    set $etp_atom_1_i = ($etp_atom_1_ap)->len
    set $etp_atom_1_p = ($etp_atom_1_ap)->name
    set $etp_atom_1_quote = 1
    # Check if atom has to be quoted
    if ($etp_atom_1_i > 0)
      etp-ct-atom-1 (*$etp_atom_1_p)
      if $etp_ct_atom
        # Atom start character
        set $etp_atom_1_p++
        set $etp_atom_1_i--
        set $etp_atom_1_quote = 0
      else
        set $etp_atom_1_i = 0
      end
    end
    while $etp_atom_1_i > 0
      etp-ct-name-1 (*$etp_atom_1_p)
      if $etp_ct_name
        # Name character
        set $etp_atom_1_p++
        set $etp_atom_1_i--
      else
        set $etp_atom_1_quote = 1
        set $etp_atom_1_i = 0
      end
    end
    # Print the atom
    if $etp_atom_1_quote
      printf "'"
    end
    set $etp_atom_1_i = ($etp_atom_1_ap)->len
    set $etp_atom_1_p = ($etp_atom_1_ap)->name
    while $etp_atom_1_i > 0
        etp-char-1 (*$etp_atom_1_p) '\''
	set $etp_atom_1_p++
        set $etp_atom_1_i--
    end
    if $etp_atom_1_quote
      printf "'"
    end
  end
end



define etp-char-1
# Args: int char, int quote_char
#
# Non-reentrant
#
  if (($arg0) < 0) || (0377 < ($arg0))
    printf "#NotChar<%#x>", ($arg0)
  else
    if ($arg0) == ($arg1)
      printf "\\%c", ($arg0)
    else
      etp-ct-printable-1 ($arg0)
      if $etp_ct_printable
        if $etp_ct_printable < 0
          printf "%c", ($arg0)
        else
          printf "\\%c", $etp_ct_printable
        end
      else
        printf "\\%03o", ($arg0)
      end
    end
  end
end

define etp-ct-printable-1
# Args: int
#
# Determines if integer is a printable character
#
# Non-reentrant
# Returns: $etp_ct_printable
#          escape alias char, or -1 if no escape alias
  if ($arg0) == 010
    set $etp_ct_printable = 'b'
  else
    if ($arg0) == 011
      set $etp_ct_printable = 't'
    else
      if ($arg0) == 012
        set $etp_ct_printable = 'n'
      else
        if ($arg0) == 013
          set $etp_ct_printable = 'v'
        else
          if ($arg0) == 014
            set $etp_ct_printable = 'f'
          else
            if ($arg0) == 033
              set $etp_ct_printable = 'e'
            else
              if ((040 <= ($arg0)) && (($arg0) <= 0176)) || \
                 ((0240 <= ($arg0)) && (($arg0) <= 0377))
                # Other printable character
                set $etp_ct_printable = -1
              else
                set $etp_ct_printable = 0
              end
            end
          end
        end
      end
    end
  end
end

define etp-ct-atom-1
# Args: int
#
# Determines if integer is an atom first character
#
# Non-reentrant
# Returns: $etp_ct_atom
  if ((0141 <= ($arg0)) && (($arg0) <= 0172)) || \
     ((0337 <= ($arg0)) && (($arg0) != 0367) && (($arg0) <= 0377))
    # Atom start character
    set $etp_ct_atom = 1
  else
    set $etp_ct_atom = 0
  end
end

define etp-ct-variable-1
# Args: int
#
# Determines if integer is a variable first character
#
# Non-reentrant
# Returns: $etp_ct_variable
  if ((056 == ($arg0)) || \
      (0101 <= ($arg0)) && (($arg0) <= 0132)) || \
      (0137 == ($arg0)) || \
      ((0300 <= ($arg0)) && (($arg0) != 0327) && (($arg0) <= 0336))
    # Variable start character
    set $etp_ct_variable = 1
  else
    set $etp_ct_variable = 0
  end
end

define etp-ct-name-1
# Args: int
#
# Determines if integer is a name character, 
# i.e non-first atom or variable character.
#
# Non-reentrant
# Returns: $etp_ct_variable
  if (($arg0) == 0100 || \
      (060 <= ($arg0)) && (($arg0) <= 071))
    set $etp_ct_name = 1
  else
    etp-ct-atom-1 ($arg0)
    if $etp_ct_atom
      set $etp_ct_name = 1
    else
      etp-ct-variable-1 ($arg0)
      set $etp_ct_name = $etp_ct_variable
    end
  end
end

define etp-pid-1
# Args: Eterm pid
#
# Non-reentrant
#
  set $etp_pid_1 = (Eterm)($arg0)
  if ($etp_pid_1 & 0xF) == 0x3
    if (etp_arch_bits == 64)
      if (etp_endianness > 0)
      	set $etp_pid_data = (unsigned) ((((Uint64) $etp_pid_1) >> 35) & 0x0fffffff)
      else
        set $etp_pid_data = (unsigned) ((((Uint64) $etp_pid_1) >> 4) & 0x0fffffff)
      end
   else
      set $etp_pid_data = (unsigned) (((((Uint32) $etp_pid_1) >> 4) & ~erts_proc.r.o.pix_mask) | ((((Uint32) $etp_pid_1) >> (erts_proc.r.o.pix_cl_shift + 4)) & erts_proc.r.o.pix_cl_mask) | (((((Uint32) $etp_pid_1) >> 4) & erts_proc.r.o.pix_cli_mask) << erts_proc.r.o.pix_cli_shift))
   end
    # Internal pid
    printf "<0.%u.%u>", $etp_pid_data & 0x7fff, ($etp_pid_data >> 15) & 0x1fff
  else
    printf "#NotPid<%#x>", ($arg0)
  end
end

define etp-extpid-1
# Args: Eterm extpid
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", (Eterm)($arg0)
  else
    set $etp_extpid_1_p = (ExternalThing*)((Eterm)($arg0) & ~0x3)
    if ($etp_extpid_1_p->header & 0x3f) != 0x30
      printf "#NotExternalPid<%#x>", $etp_extpid_1_p->header
    else
      ## External pid
      set $etp_extpid_1_number = $etp_extpid_1_p->data.ui[0]&0x7fff
      set $etp_extpid_1_serial = ($etp_extpid_1_p->data.ui[0]>>15)&0x1fff
      set $etp_extpid_1_np = $etp_extpid_1_p->node
      set $etp_extpid_1_creation = $etp_extpid_1_np->creation
      set $etp_extpid_1_dep = $etp_extpid_1_np->dist_entry
      set $etp_extpid_1_node = $etp_extpid_1_np->sysname
      if ($etp_extpid_1_node & 0x3f) != 0xb
        # Should be an atom
        printf "#ExternalPidError<%#x>", ($arg0)
      else
        if $etp_extpid_1_dep == erts_this_dist_entry
          printf "<0:"
        else
          printf "<%u:", $etp_extpid_1_node>>6
        end
        etp-atom-1 ($etp_extpid_1_node)
        printf "/%u.%u.%u>", $etp_extpid_1_creation, \
               $etp_extpid_1_number, $etp_extpid_1_serial
      end
    end
  end
end


define etp-port-1
# Args: Eterm port
#
# Non-reentrant
#
  set $etp_port_1 = (Eterm)($arg0)
  if ($etp_port_1 & 0xF) == 0x7
    if (etp_arch_bits == 64)
      if (etp_endianness > 0)
      	set $etp_port_data = (unsigned) ((((Uint64) $etp_port_1) >> 36) & 0x0fffffff)
      else
        set $etp_port_data = (unsigned) ((((Uint64) $etp_port_1) >> 4) & 0x0fffffff)
      end
   else
      set $etp_port_data = (unsigned) (((((Uint32) $etp_port_1) >> 4) & ~erts_port.r.o.pix_mask) | ((((Uint32) $etp_port_1) >> (erts_port.r.o.pix_cl_shift + 4)) & erts_port.r.o.pix_cl_mask) | (((((Uint32) $etp_port_1) >> 4) & erts_port.r.o.pix_cli_mask) << erts_port.r.o.pix_cli_shift))
   end
    # Internal port
    printf "#Port<0.%u>", $etp_port_data
  else
    printf "#NotPort<%#x>", ($arg0)
  end
end

define etp-extport-1
# Args: Eterm extport
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", (Eterm)($arg0)
  else
    set $etp_extport_1_p = (ExternalThing*)((Eterm)($arg0) & ~0x3)
    if ($etp_extport_1_p->header & 0x3F) != 0x34
      printf "#NotExternalPort<%#x>", $etp_extport_1->header
    else
      ## External port
      set $etp_extport_1_number = $etp_extport_1_p->data.ui[0]&0x3ffff
      set $etp_extport_1_np = $etp_extport_1_p->node
      set $etp_extport_1_creation = $etp_extport_1_np->creation
      set $etp_extport_1_dep = $etp_extport_1_np->dist_entry
      set $etp_extport_1_node = $etp_extport_1_np->sysname
      if ($etp_extport_1_node & 0x3f) != 0xb
        # Should be an atom
        printf "#ExternalPortError<%#x>", ($arg0)
      else
        if $etp_extport_1_dep == erts_this_dist_entry
          printf "#Port<0:"
        else
          printf "#Port<%u:", $etp_extport_1_node>>6
        end
        etp-atom-1 ($etp_extport_1_node)
        printf "/%u.%u>", $etp_extport_1_creation, $etp_extport_1_number
      end
    end
  end
end



define etp-bignum-1
# Args: Eterm bignum
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", (Eterm)($arg0)
  else
    set $etp_bignum_1_p = (Eterm*)((Eterm)($arg0) & ~0x3)
    if ($etp_bignum_1_p[0] & 0x3b) != 0x08
      printf "#NotBignum<%#x>", $etp_bignum_1_p[0]
    else
      set $etp_bignum_1_i = ($etp_bignum_1_p[0] >> 6)
      if $etp_bignum_1_i < 1
        printf "#BignumError<%#x>", (Eterm)($arg0)
      else
        if $etp_bignum_1_p[0] & 0x04
          printf "-"
        end
        set $etp_bignum_1_p = (ErtsDigit *)($etp_bignum_1_p + 1)
        printf "16#"
        if $etp_arch64
          while $etp_bignum_1_i > 0
            set $etp_bignum_1_i--
            printf "%016lx", $etp_bignum_1_p[$etp_bignum_1_i]
          end
        else
          while $etp_bignum_1_i > 0
            set $etp_bignum_1_i--
            printf "%08x", $etp_bignum_1_p[$etp_bignum_1_i]
          end
        end
      end
    end
  end
end



define etp-float-1
# Args: Eterm float
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", (Eterm)($arg0)
  else
    set $etp_float_1_p = (Eterm*)((Eterm)($arg0) & ~0x3)
    if ($etp_float_1_p[0] & 0x3f) != 0x18
      printf "#NotFloat<%#x>", $etp_float_1_p[0]
    else
      printf "%f", *(double*)($etp_float_1_p+1)
    end
  end
end



define etp-ref-1
# Args: Eterm ref
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", (Eterm)($arg0)
  else
    set $etp_ref_1_p = (ErtsORefThing *)((Eterm)($arg0) & ~0x3)
    if ($etp_ref_1_p->header & 0x3b) != 0x10
      printf "#NotRef<%#x>", $etp_ref_1_p->header
    else
      if $etp_ref_1_p->header != etp_ref_header && $etp_ref_1_p->header != etp_magic_ref_header
        printf "#InternalRefError<%#x>", ($arg0)
      else
	set $etp_magic_ref = 0
	set $etp_ref_1_i = 3
	set $etp_ref_1_error = 0
	set $etp_ref_1_nump = (Uint32 *) 0
	if etp_ref_header == etp_magic_ref_header
          if $etp_ref_1_p->marker != 0xffffffff
      	     set $etp_magic_ref = 1
          end
	else
	  if $etp_ref_1_p->header == etp_magic_ref_header
      	     set $etp_magic_ref = 1
          end
	end
        if $etp_magic_ref == 0
          set $etp_ref_1_nump = $etp_ref_1_p->num
        else
          set $etp_ref_1_nump = ((ErtsMRefThing *) $etp_ref_1_p)->mb->refn
        end
        printf "#Ref<0"
        set $etp_ref_1_i--
        while $etp_ref_1_i >= 0
          printf ".%u", (unsigned) $etp_ref_1_nump[$etp_ref_1_i]
          set $etp_ref_1_i--
        end
        printf ">"
      end
    end
  end
end



define etp-extref-1
# Args: Eterm extref
#
# Non-reentrant
#
  if ((Eterm)($arg0) & 0x3) != 0x2
    printf "#NotBoxed<%#x>", (Eterm)($arg0)
  else
    set $etp_extref_1_p = (ExternalThing*)((Eterm)($arg0) & ~0x3)
    if ($etp_extref_1_p->header & 0x3F) != 0x38
      printf "#NotExternalRef<%#x>", $etp_extref_1->header
    else
      ## External ref
      set $etp_extref_1_nump = (Uint32 *) 0
      set $etp_extref_1_error = 0
      set $etp_extref_1_i = (int) ($etp_extref_1_p->header >> 6)
      set $etp_extref_1_np = $etp_extref_1_p->node
      set $etp_extref_1_creation = $etp_extref_1_np->creation
      set $etp_extref_1_dep = $etp_extref_1_np->dist_entry
      set $etp_extref_1_node = $etp_extref_1_np->sysname
      if ($etp_extref_1_node & 0x3f) != 0xb || $etp_extref_1_i < 3
        # Node should be an atom
	set $etp_extref_1_error = 1
      else
        ## $etp_extref_1_i now equals data (Uint) words
	set $etp_extref_1_i -= 2
        if $etp_arch64
          if ((((int) $etp_extref_1_p->data.ui32[0]) + 1) \
              > (2 * $etp_extref_1_i))
	    set $etp_extref_1_error = 1
          else
            set $etp_extref_1_nump = &$etp_extref_1_p->data.ui32[1]
            set $etp_extref_1_i = (int) $etp_extref_1_p->data.ui32[0]
          end
        else
            set $etp_extref_1_nump = &$etp_extref_1_p->data.ui32[0]
        end
        ## $etp_extref_1_i now equals no of ref num (Uint32) words
        if !$etp_extref_1_error
          if $etp_extref_1_dep == erts_this_dist_entry
            printf "#Ref<0:"
          else
            printf "#Ref<%u:", $etp_extref_1_node>>6
          end
          etp-atom-1 ($etp_extref_1_node)
          printf "/%u", $etp_extref_1_creation
        end
      end
      if $etp_extref_1_error
        printf "#ExternalRefError<%#x>", ($arg0)
      else
        set $etp_extref_1_i--
        while $etp_extref_1_i >= 0
          printf ".%u", (unsigned) $etp_extref_1_nump[$etp_extref_1_i]
          set $etp_extref_1_i--
        end
        printf ">"
      end
    end
  end
end



define etp-mfa-1
# Args: Eterm*, int offset
#
# Reentrant
#
  printf "<"
  etp-atom-1 (((Eterm*)($arg0))[0])
  printf ":"
  etp-atom-1 (((Eterm*)($arg0))[1])
  printf "/%d", ((Eterm*)($arg0))[2]
  if ($arg1) > 0
    printf "+%#x>", ($arg1)
  else
    printf ">"
  end	
end

define etp-mfa
# Args: Eterm*
#
# Reentrant capable
#
  etp-mfa-1 ($arg0) 0
  printf ".\n"
end

document etp-mfa
%---------------------------------------------------------------------------
% etp-mfa Eterm*
% 
% Take an Eterm* to an MFA function name entry and print it.
% These can be found e.g in the process structure;
% process_tab[i]->current and process_tab[i]->initial.
%---------------------------------------------------------------------------
end

define etp-cp-func-info-1
# Args: Eterm cp
#
# Non-reentrant, takes cp, sets $etp_cp_p to MFA in func_info
#
  set $etp_cp = (Eterm)($arg0)
  set $etp_ranges = &r[(int)the_active_code_index]
  set $etp_cp_low = $etp_ranges->modules
  set $etp_cp_high = $etp_cp_low + $etp_ranges->n
  set $etp_cp_mid = (Range*)$etp_ranges->mid
  set $etp_cp_p = 0
  #
  while $etp_cp_low < $etp_cp_high
    if $etp_cp < $etp_cp_mid->start
      set $etp_cp_high = $etp_cp_mid
    else
      if $etp_cp > (BeamInstr*)$etp_cp_mid->end
        set $etp_cp_low = $etp_cp_mid + 1
      else
        set $etp_cp_p = $etp_cp_low = $etp_cp_high = $etp_cp_mid
      end
    end
    set $etp_cp_mid = $etp_cp_low + ($etp_cp_high-$etp_cp_low)/2
  end
  if $etp_cp_p
    # 13 = MI_FUNCTIONS
    set $etp_cp_low = (Eterm**)($etp_cp_p->start + 13)
    # 0 = MI_NUM_FUNCTIONS
    set $etp_cp_high = $etp_cp_low +$etp_cp_p->start[0]
    set $etp_cp_p = 0
    while $etp_cp_low < $etp_cp_high
      set $etp_cp_mid = $etp_cp_low + ($etp_cp_high-$etp_cp_low)/2
      if $etp_cp < $etp_cp_mid[0]
        set $etp_cp_high = $etp_cp_mid
      else
        if $etp_cp < $etp_cp_mid[1]
          set $etp_cp_p = $etp_cp_mid[0]+2
          set $etp_cp_low = $etp_cp_high = $etp_cp_mid
        else
          set $etp_cp_low = $etp_cp_mid + 1
        end
      end
    end
  end
  if $etp_cp_p
    set $cp_cp_p_offset = ($etp_cp-((Eterm)($etp_cp_p-2)))
  else
    set $cp_cp_p_offset = 0
  end
end

define etp-cp-1
# Args: Eterm cp
#
# Non-reentrant
#
  etp-cp-func-info-1 $arg0
  if $etp_cp_p
    printf "#Cp"
    etp-mfa-1 $etp_cp_p $cp_cp_p_offset
  else
    if $etp_cp == beam_apply+1
      printf "#Cp<terminate process normally>"
    else
      if *(Eterm*)($etp_cp) == beam_return_trace[0]
        if ($etp_cp) == beam_exception_trace
	  printf "#Cp<exception trace>"
        else
	  printf "#Cp<return trace>"
	end
      else
        if *(Eterm*)($etp_cp) == beam_return_to_trace[0]
	  printf "#Cp<return to trace>"
	else
          printf "#Cp<%#x>", $etp_cp
	end
      end
    end
  end
end

define etp-cp
# Args: Eterm cp
#
# Reentrant capable
#
  etp-cp-1 ($arg0)
  printf ".\n"
end

document etp-cp
%---------------------------------------------------------------------------
% etp-cp Eterm
% 
% Take a code continuation pointer and print 
% module, function, arity and offset. 
% 
% Code continuation pointers can be found in the process structure e.g
% process_tab[i]->cp and process_tab[i]->i, the second is the
% program counter, which is the same thing as a continuation pointer.
%---------------------------------------------------------------------------
end

define etp-check-beam-ranges
  set $etp_ci = 0
  while $etp_ci < 3
    printf "Checking code index %i...\n", $etp_ci
    set $etp_j = 0
    while $etp_j < r[$etp_ci].n
      set $etp_p = &r[$etp_ci].modules[$etp_j]
      if $etp_j > 0 && $etp_p->start < (Range*)$etp_p[-1].end.counter
        printf "r[%i].modules[%i]: ERROR start < previous\n", $etp_ci, $etp_j
      end
      if $etp_p->start > (Range*)$etp_p->end.counter
        printf "r[%i].modules[%i]: ERROR start > end\n", $etp_ci, $etp_j
      else
        if $etp_p->start == (Range*)$etp_p->end.counter
          printf "r[%i].modules[%i]: Purged\n", $etp_ci, $etp_j
        end
      end
      set $etp_j = $etp_j + 1
    end
    set $etp_ci = $etp_ci + 1
  end
end

document etp-check-beam-ranges
%---------------------------------------------------------------------------
% etp-check-beam-ranges
%
% Do consistency check of beam_ranges data structure
% and print errors and empty slots from purged modules.
%---------------------------------------------------------------------------
end


############################################################################
# Commands for special term bunches.
#

define etp-msgq
# Args: ErlMessageQueue*
#
# Non-reentrant
#
  set $etp_msgq = ($arg0)
  set $etp_msgq_p = $etp_msgq->first
  set $etp_msgq_i = $etp_msgq->len
  set $etp_msgq_prev = $etp_msgq->last
  printf "%% Message queue (%d):", $etp_msgq_i
  if ($etp_msgq_i > 0) && $etp_msgq_p
    printf "\n["
  else
    printf "\n"
  end
  while ($etp_msgq_i > 0) && $etp_msgq_p
    set $etp_msgq_i--
    set $etp_msgq_next = $etp_msgq_p->next
    # Msg
    etp-1 ($etp_msgq_p->m[0]) 0
    if ($etp_msgq_i > 0) && $etp_msgq_next
      printf ", %% "
    else
      printf "]. %% "
    end
    # Seq_trace token
    etp-1 ($etp_msgq_p->m[1]) 0
    if $etp_msgq_p == $etp_msgq->save
      printf ", <=\n"
    else
      printf "\n"
    end
    if ($etp_msgq_i > 0) && $etp_msgq_next
      printf " "
    end
    #
    set $etp_msgq_prev = $etp_msgq_p
    set $etp_msgq_p = $etp_msgq_next
  end
  if $etp_msgq_i != 0
    printf "#MsgQShort<%d>\n", $etp_msgq_i
  end
  if $etp_msgq_p != 0
    printf "#MsgQLong<%#lx%p>\n", (unsigned long)$etp_msgq_p
  end
  if $etp_msgq_prev != $etp_msgq->last
    printf "#MsgQEndError<%#lx%p>\n", (unsigned long)$etp_msgq_prev
  end
end

document etp-msgq
%---------------------------------------------------------------------------
% etp-msgq ErlMessageQueue*
% 
% Take an ErlMessageQueue* and print the contents of the message queue. 
% Sequential trace tokens are included in comments and 
% the current match position in the queue is marked '<='.
% 
% A process's message queue is process_tab[i]->msg.
%---------------------------------------------------------------------------
end



define etpf-msgq
# Args: Process*
#
# Non-reentrant
#
  set $etp_flat = 1
  etp-msgq ($arg0)
  set $etp_flat = 0
end

document etpf-msgq
%---------------------------------------------------------------------------
% etpf-msgq ErlMessageQueue*
% 
% Same as 'etp-msgq' but print the messages using etpf (flat).
%---------------------------------------------------------------------------
end

define etp-stack-preamble
  set $etp_stack_p = ($arg0)->stop
  set $etp_stack_end = ($arg0)->hend
  printf "%% Stacktrace (%u)\n", $etp_stack_end-$etp_stack_p
  etp-1 ((Eterm)($arg0)->i) 0
  printf "  (I)\n"
  if ($arg0)->cp != 0
    etp-1 ((Eterm)($arg0)->cp) 0
    printf "  (cp)\n"
  end
end

define etp-stacktrace
# Args: Process*
#
# Non-reentrant
#
  etp-stack-preamble ($arg0)
  while $etp_stack_p < $etp_stack_end
    if ($etp_stack_p[0] & 0x3) == 0x0
      # Continuation pointer
      etp $etp_stack_p[0]
    end
    set $etp_stack_p++
  end
end

document etp-stacktrace
%---------------------------------------------------------------------------
% etp-stacktrace Process*
% 
% Take an Process* and print a stactrace for the process.
% The stacktrace consists just of the pushed code continuation
% pointers on the stack, the most recently pushed first.
%---------------------------------------------------------------------------
end

define etp-stackdump
# Args: Process*
#
# Non-reentrant
#
  etp-stack-preamble ($arg0)
  while $etp_stack_p < $etp_stack_end
    etp $etp_stack_p[0]
    set $etp_stack_p++
  end
end

document etp-stackdump
%---------------------------------------------------------------------------
% etp-stackdump Process*
% 
% Take an Process* and print a stackdump for the process.
% The stackdump consists of all pushed values on the stack.
% All code continuation pointers are preceeded with a line
% of dashes to make the stack frames more visible.
%---------------------------------------------------------------------------
end

define etpf-stackdump
# Args: Process*
#
# Non-reentrant
#
  set $etp_flat = 1
  etp-stackdump ($arg0)
  set $etp_flat = 0
end

document etpf-stackdump
%---------------------------------------------------------------------------
% etpf-stackdump Process*
% 
% Same as etp-stackdump but print the values using etpf (flat).
%---------------------------------------------------------------------------
end

define etp-heapdump
# Args: Process*
#
# Non-reentrant
  etp-heapdump-1 ($arg0)->heap ($arg0)->htop
end

document etp-heapdump
%---------------------------------------------------------------------------
% etp-heapdump Process*
%
% Take an Process* and print a heapdump for the process heap.
%---------------------------------------------------------------------------
end

define etp-heapdump-old
# Args: Process*
#
# Non-reentrant
  etp-heapdump-1 ($arg0)->old_heap ($arg0)->old_htop
end

document etp-heapdump
%---------------------------------------------------------------------------
% etp-heapdump-old Process*
%
% Take an Process* and print a heapdump for the process old heap (gen-heap).
%---------------------------------------------------------------------------
end


define etp-heapdump-1
# Args: Eterm* heap, Eterm* htop
#
# Non-reentrant
  set $etp_heapdump_heap = (Eterm*)($arg0)
  set $etp_heapdump_p = (Eterm*)($arg0)
  set $etp_heapdump_end = (Eterm*)($arg1)
  set $etp_heapdump_skips = 0
  printf "%% heapdump (%u):\n", $etp_heapdump_end-$etp_heapdump_p
  while $etp_heapdump_p < $etp_heapdump_end
    set $etp_heapdump_ix = 0
    printf " %p: ", $etp_heapdump_p
    while $etp_heapdump_p < $etp_heapdump_end && $etp_heapdump_ix < 8
	if ($etp_heapdump_skips > 0)
	  printf "|   0x%08x ", ($etp_heapdump_p)
	  set $etp_heapdump_skips--
	else
	  etp-term-dump $etp_heapdump_p[0]
	end
	set $etp_heapdump_p++
	set $etp_heapdump_ix++
    end
    printf "\n"
  end
end


define etp-term-dump
# Args: Eterm
  if (($arg0) & 0x3) == 0
    etp-term-dump-header ($arg0)
  else
    if (($arg0) & 0x3) == 1
      # Cons pointer
      set $etp_term_dump_cons_p = ((Eterm*)(($arg0) & ~0x3))
      if $etp_term_dump_cons_p > $etp_heapdump_heap &&  $etp_term_dump_cons_p < $etp_heapdump_end
        printf "| C:0x%08x ", $etp_term_dump_cons_p
        #printf "| C: --> %5d ", $etp_heapdump_p - $etp_term_dump_cons_p - 1
      else
        printf "| C:0x%08x ", $etp_term_dump_cons_p
      end
    else
      if (($arg0) & 0x3) == 2
        # Box pointer
        printf "| B:0x%08x ", ($arg0)
      else
        if (($arg0) & 0x3) == 3
          # immediate
          etp-term-dump-immediate ($arg0)
        else
          printf "| U:0x%08x ", ($arg0)
        end
      end
    end
  end
end

define etp-term-dump-immediate
# Args: immediate term
  if (($arg0) & 0xF) == 0xf
    # Fixnum
    etp-ct-printable-1 ((long)((Sint)($arg0)>>4))
      if $etp_ct_printable
        if $etp_ct_printable < 0
	  printf "| I:   %c (%3ld) ", (long)((Sint)($arg0)>>4), (long)((Sint)($arg0)>>4)
        else
	  printf "| I:  \\%c (%3ld) ", (long)((Sint)($arg0)>>4), (long)((Sint)($arg0)>>4)
        end
      else
      printf "| I:%10ld ", (long)((Sint)($arg0)>>4)
    end
  else
    if (($arg0) & 0xF) == 0x3
      etp-term-dump-pid ($arg0)
    else
      if (($arg0) & 0xF) == 0x7
        printf "| port:0x%05x ", ($arg0)
       else
         # Immediate2  - 0xB
         if (($arg0) & 0x3f) == 0x0b
	   etp-term-dump-atom ($arg0)
         else
           if (($arg0) & 0x3f) == 0x1b
	     printf "| #Catch<%06d> ", ($arg0)>>6
           else
             if (($arg0) == $etp_nil)
               printf "|    [] (NIL)  "
             else
               printf "| I:0x%08x ", ($arg0)
             end
	   end
	 end
      end
    end
  end
end

define etp-term-dump-atom
# Args: atom term
  set $etp_atom_1_ap = (Atom*)erts_atom_table.seg_table[(Eterm)($arg0)>>16][((Eterm)($arg0)>>6)&0x3FF]
  set $etp_atom_1_i = ($etp_atom_1_ap)->len
  set $etp_atom_1_p = ($etp_atom_1_ap)->name
  set $etp_atom_1_quote = 1
  set $etp_atom_indent = 13

  if ($etp_atom_1_i < 11)
    if ($etp_atom_1_i > 0)
      etp-ct-atom-1 (*$etp_atom_1_p)
      if $etp_ct_atom
        set $etp_atom_indent = 13
      else
        set $etp_atom_indent = 11
      end
    end
    # perform indentation
    printf "|"
    while ($etp_atom_1_i < $etp_atom_indent)
	printf " "
        set $etp_atom_1_i++
    end
    set $etp_atom_1_i = ($etp_atom_1_ap)->len
    # Check if atom has to be quoted
    if ($etp_atom_1_i > 0)
      etp-ct-atom-1 (*$etp_atom_1_p)
      if $etp_ct_atom
        # Atom start character
        set $etp_atom_1_p++
        set $etp_atom_1_i--
        set $etp_atom_1_quote = 0
      else
        set $etp_atom_1_i = 0
      end
    end
    while $etp_atom_1_i > 0
      etp-ct-name-1 (*$etp_atom_1_p)
      if $etp_ct_name
        # Name character
        set $etp_atom_1_p++
        set $etp_atom_1_i--
      else
        set $etp_atom_1_quote = 1
        set $etp_atom_1_i = 0
      end
    end
    # Print the atom
    if $etp_atom_1_quote
      printf "'"
    end
    set $etp_atom_1_i = ($etp_atom_1_ap)->len
    set $etp_atom_1_p = ($etp_atom_1_ap)->name
    while $etp_atom_1_i > 0
        etp-char-1 (*$etp_atom_1_p) '\''
        set $etp_atom_1_p++
        set $etp_atom_1_i--
    end
    if $etp_atom_1_quote
      printf "'"
    end
    printf " "
  else
    printf "| A:0x%08x ", ($arg0)
  end
end

define etp-term-dump-pid
# Args: Eterm pid
#
# Non-reentrant
#
  set $etp_pid_1 = (Eterm)($arg0)
  if ($etp_pid_1 & 0xF) == 0x3
    if (etp_arch_bits == 64)
      if (etp_endianness > 0)
        set $etp_pid_data = (unsigned) ((((Uint64) $etp_pid_1) >> 36) & 0x0fffffff)
      else
        set $etp_pid_data = (unsigned) ((((Uint64) $etp_pid_1) >> 4) & 0x0fffffff)
      end
   else
      set $etp_pid_data = (unsigned) (((((Uint32) $etp_pid_1) >> 4) & ~erts_proc.r.o.pix_mask) | ((((Uint32) $etp_pid_1) >> (erts_proc.r.o.pix_cl_shift + 4)) & erts_proc.r.o.pix_cl_mask) | (((((Uint32) $etp_pid_1) >> 4) & erts_proc.r.o.pix_cli_mask) << erts_proc.r.o.pix_cli_shift))
   end
    # Internal pid
    printf "| <0.%04u.%03u> ", $etp_pid_data & 0x7fff, ($etp_pid_data >> 15) & 0x1fff
  else
    printf "| #NotPid<%#x> ", ($arg0)
  end
end

define etp-term-dump-header
# Args: Header term
  if (($arg0) & 0x3f) == 0
    printf  "| H:%4d-tuple ", ($arg0) >> 6
  else
    set $etp_heapdump_skips = ($arg0) >> 6
    if ((($arg0) & 0x3f) == 0x18)
      printf  "| H: float %3d ", ($arg0) >> 6
    else
      if ((($arg0) & 0x3f) == 0x28)
        # sub-binary
        printf  "| H:   sub-bin "
      else
        if ((($arg0) & 0x3f) == 0x8)
          # pos-bignum
          printf  "| H:bignum %3u ", ($arg0) >> 6
        else
          printf  "| header %5d ", ($arg0) >> 6
	end
      end
    end
  end
end



define etp-pid2pix-1
# Args: Eterm
#
   if (etp_arch_bits == 64)
      if (etp_endianness > 0)
      	 set $etp_pix = (int) (((Uint64) $arg0) & 0x0fffffff)
      else
      	 set $etp_pix = (int) ((((Uint64) $arg0) >> 32) & 0x0fffffff)
      end
   else
      set $etp_pix =  (int) ((((Uint32) $arg0) >> 4) & erts_proc.r.o.pix_mask)
   end
end

define etp-pix2proc
# Args: Eterm
#
   set $proc = (Process *) *((UWord *) &erts_proc.r.o.tab[((int) $arg0)])
   printf "(Process *) %p\n", $proc
end

define etp-pid2proc-1
# Args: Eterm
#
  etp-pid2pix-1 $arg0
  set $proc = (Process *) *((UWord *) &erts_proc.r.o.tab[$etp_pix])
end

define etp-pid2proc
# Args: Eterm
#
   etp-pid2proc-1 $arg0
   printf "(Process *) %p\n", $proc
end

define etp-proc-state-int
# Args: int
#
  if ($arg0 & 0x80000000)
    printf "GARBAGE<0x80000000> | "
  end
  if ($arg0 & 0x40000000)
    printf "dirty-running-sys | "
  end
  if ($arg0 & 0x20000000)
    printf "dirty-running | "
  end
  if ($arg0 & 0x10000000)
    printf "dirty-active-sys | "
  end
  if ($arg0 & 0x8000000)
    printf "dirty-io-proc | "
  end
  if ($arg0 & 0x4000000)
    printf "dirty-cpu-proc | "
  end
  if ($arg0 & 0x2000000)
    printf "on-heap-msgq | "
  end
  if ($arg0 & 0x1000000)
    printf "off-heap-msgq | "
  end
  if ($arg0 & 0x800000)
    printf "delayed-sys | "
  end
  if ($arg0 & 0x400000)
    printf "proxy | "
    set $proxy_process = 1
  else
    set $proxy_process = 0
  end
  if ($arg0 & 0x200000)
    printf "running-sys | "
  end
  if ($arg0 & 0x100000)
    printf "active-sys | "
  end
  if ($arg0 & 0x80000)
    printf "trapping-exit | "
  end
  if ($arg0 & 0x40000)
    printf "bound | "
  end
  if ($arg0 & 0x20000)
    printf "garbage-collecting | "
  end
  if ($arg0 & 0x10000)
    printf "suspended | "
  end
  if ($arg0 & 0x8000)
    printf "running | "
  end
  if ($arg0 & 0x4000)
    printf "in-run-queue | "
  end
  if ($arg0 & 0x2000)
    printf "active | "
  end
  if ($arg0 & 0x1000)
    printf "pending-exit | "
  end
  if ($arg0 & 0x800)
    printf "exiting | "
  end
  if ($arg0 & 0x400)
    printf "free | "
  end
  if ($arg0 & 0x200)
    printf "in-prq-low | "
  end
  if ($arg0 & 0x100)
    printf "in-prq-normal | "
  end
  if ($arg0 & 0x80)
    printf "in-prq-high | "
  end
  if ($arg0 & 0x40)
    printf "in-prq-max | "
  end
  if ($arg0 & 0x30) == 0x0
    printf "prq-prio-max | "
  else
    if ($arg0 & 0x30) == 0x10
      printf "prq-prio-high | "
    else
      if ($arg0 & 0x30) == 0x20
        printf "prq-prio-normal | "
      else
        printf "prq-prio-low | "
      end
    end
  end
  if ($arg0 & 0xc) == 0x0
    printf "usr-prio-max | "
  else
    if ($arg0 & 0xc) == 0x4
      printf "usr-prio-high | "
    else
      if ($arg0 & 0xc) == 0x8
        printf "usr-prio-normal | "
      else
        printf "usr-prio-low | "
      end
    end
  end
  if ($arg0 & 0x3) == 0x0
    printf "act-prio-max\n"
  else
    if ($arg0 & 0x3) == 0x1
      printf "act-prio-high\n"
    else
      if ($arg0 & 0x3) == 0x2
        printf "act-prio-normal\n"
      else
        printf "act-prio-low\n"
      end
    end
  end
end

document etp-proc-state-int
%---------------------------------------------------------------------------
% etp-proc-state-int int
% 
% Print state of process state value
%---------------------------------------------------------------------------
end


define etp-proc-state
# Args: Process*
#
  set $state_int = *(((Uint32 *) &(((Process *) $arg0)->state)))
  etp-proc-state-int $state_int
end

document etp-proc-state
%---------------------------------------------------------------------------
% etp-proc-state Process*
% 
% Print state of process
%---------------------------------------------------------------------------
end
define etp-proc-state-int
# Args: int
#
  if ($arg0 & 0x80000000)
    printf "GARBAGE<0x80000000> | "
  end
  if ($arg0 & 0x40000000)
    printf "dirty-running-sys | "
  end
  if ($arg0 & 0x20000000)
    printf "dirty-running | "
  end
  if ($arg0 & 0x10000000)
    printf "dirty-active-sys | "
  end
  if ($arg0 & 0x8000000)
    printf "dirty-io-proc | "
  end
  if ($arg0 & 0x4000000)
    printf "dirty-cpu-proc | "
  end
  if ($arg0 & 0x2000000)
    printf "on-heap-msgq | "
  end
  if ($arg0 & 0x1000000)
    printf "off-heap-msgq | "
  end
  if ($arg0 & 0x800000)
    printf "delayed-sys | "
  end
  if ($arg0 & 0x400000)
    printf "proxy | "
    set $proxy_process = 1
  else
    set $proxy_process = 0
  end
  if ($arg0 & 0x200000)
    printf "running-sys | "
  end
  if ($arg0 & 0x100000)
    printf "active-sys | "
  end
  if ($arg0 & 0x80000)
    printf "trapping-exit | "
  end
  if ($arg0 & 0x40000)
    printf "bound | "
  end
  if ($arg0 & 0x20000)
    printf "garbage-collecting | "
  end
  if ($arg0 & 0x10000)
    printf "suspended | "
  end
  if ($arg0 & 0x8000)
    printf "running | "
  end
  if ($arg0 & 0x4000)
    printf "in-run-queue | "
  end
  if ($arg0 & 0x2000)
    printf "active | "
  end
  if ($arg0 & 0x1000)
    printf "pending-exit | "
  end
  if ($arg0 & 0x800)
    printf "exiting | "
  end
  if ($arg0 & 0x400)
    printf "free | "
  end
  if ($arg0 & 0x200)
    printf "in-prq-low | "
  end
  if ($arg0 & 0x100)
    printf "in-prq-normal | "
  end
  if ($arg0 & 0x80)
    printf "in-prq-high | "
  end
  if ($arg0 & 0x40)
    printf "in-prq-max | "
  end
  if ($arg0 & 0x30) == 0x0
    printf "prq-prio-max | "
  else
    if ($arg0 & 0x30) == 0x10
      printf "prq-prio-high | "
    else
      if ($arg0 & 0x30) == 0x20
        printf "prq-prio-normal | "
      else
        printf "prq-prio-low | "
      end
    end
  end
  if ($arg0 & 0xc) == 0x0
    printf "usr-prio-max | "
  else
    if ($arg0 & 0xc) == 0x4
      printf "usr-prio-high | "
    else
      if ($arg0 & 0xc) == 0x8
        printf "usr-prio-normal | "
      else
        printf "usr-prio-low | "
      end
    end
  end
  if ($arg0 & 0x3) == 0x0
    printf "act-prio-max\n"
  else
    if ($arg0 & 0x3) == 0x1
      printf "act-prio-high\n"
    else
      if ($arg0 & 0x3) == 0x2
        printf "act-prio-normal\n"
      else
        printf "act-prio-low\n"
      end
    end
  end
end

document etp-proc-state-int
%---------------------------------------------------------------------------
% etp-proc-state-int int
% 
% Print state of process state value
%---------------------------------------------------------------------------
end


define etp-proc-state
# Args: Process*
#
  set $state_int = *(((Uint32 *) &(((Process *) $arg0)->state)))
  etp-proc-state-int $state_int
end

document etp-proc-state
%---------------------------------------------------------------------------
% etp-proc-state Process*
% 
% Print state of process
%---------------------------------------------------------------------------
end

define etp-proc-flags-int
# Args: int
#
  if ($arg0 & ~0x1ffffff)
    printf "GARBAGE<%x> ", ($arg0 & ~0x1ffffff)
  end
  if ($arg0 & 0x1000000)
    printf "dirty-minor-gc "
  end
  if ($arg0 & 0x800000)
    printf "dirty-major-gc "
  end
  if ($arg0 & 0x400000)
    printf "dirty-gc-hibernate "
  end
  if ($arg0 & 0x200000)
    printf "dirty-cla "
  end
  if ($arg0 & 0x100000)
    printf "delayed-del-proc "
  end
  if ($arg0 & 0x80000)
    printf "hipe-mode "
  end
  if ($arg0 & 0x40000)
    printf "have-blocked-nmsb "
  end
  if ($arg0 & 0x20000)
    printf "shdlr-onln-wait-q "
  end
  if ($arg0 & 0x10000)
    printf "delay-gc "
  end
  if ($arg0 & 0x8000)
    printf "abandoned-heap-use "
  end
  if ($arg0 & 0x4000)
    printf "off-heap-msgq-chng "
  end
  if ($arg0 & 0x2000)
    printf "on-heap-msgq "
  end
  if ($arg0 & 0x1000)
    printf "off-heap-msgq "
  end
  if ($arg0 & 0x800)
    printf "disable-gc "
  end
  if ($arg0 & 0x400)
    printf "force-gc "
  end
  if ($arg0 & 0x200)
    printf "p2pnr-resched "
  end
  if ($arg0 & 0x100)
    printf "have-blocked-msb "
  end
  if ($arg0 & 0x80)
    printf "using-ddll "
  end
  if ($arg0 & 0x40)
    printf "distribution "
  end
  if ($arg0 & 0x20)
    printf "using-db "
  end
  if ($arg0 & 0x10)
    printf "need-fullsweep "
  end
  if ($arg0 & 0x8)
    printf "heap-grow "
  end
  if ($arg0 & 0x4)
    printf "timo "
  end
  if ($arg0 & 0x2)
    printf "inslpqueue "
  end
  if ($arg0 & 0x1)
    printf "hibernate-sched "
  end
  printf "\n"
end

document etp-proc-flags-int
%---------------------------------------------------------------------------
% etp-proc-flags-int int
% 
% Print flags of process flags value
%---------------------------------------------------------------------------
end


define etp-proc-flags
# Args: Process*
#
  set $flags_int = ((Process *) $arg0)->flags
  etp-proc-flags-int $flags_int
end

document etp-proc-flags
%---------------------------------------------------------------------------
% etp-proc-flags Process*
% 
% Print flags of process
%---------------------------------------------------------------------------
end

define etp-process-info
# Args: Process*
#
  printf "  Pid: "
  set $etp_proc = ((Process*)$arg0)
  etp-1 $etp_proc->common.id
  printf "\n  State: "
  etp-proc-state $etp_proc
  printf "\n  Flags: "
  etp-proc-flags $etp_proc
  if $proxy_process != 0
    printf "  Pointer: (Process *) %p\n", $etp_proc
    printf "  *** PROXY process struct *** refer to: \n"
    etp-pid2proc-1 $etp_proc->common.id
    etp-process-info $proc
  else
  if (*(((Uint32 *) &($etp_proc->state))) & 0x4) == 0
    if ($etp_proc->common.u.alive.reg)
      printf "  Registered name: "
      etp-1 $etp_proc->common.u.alive.reg->name
      printf "\n"
    end
  end
  printf "  Current function: "
  if ($etp_proc->current)
    etp-1 $etp_proc->current->module
    printf ":"
    etp-1 $etp_proc->current->function
    printf "/%d\n", $etp_proc->current->arity
  else
    printf "unknown\n"
  end
  printf "  CP: "
  if ($etp_proc->cp)
    etp-cp-1 $etp_proc->cp
    printf "\n"
  else
    printf "unknown\n"
  end
  printf "  I: "
  if ($etp_proc->i)
    etp-cp-1 $etp_proc->i
    printf "\n"
  else
    printf "unknown\n"
  end
  printf "  Heap size: %ld\n", $etp_proc->heap_sz
  printf "  Old-heap size: "
  if ($etp_proc->old_heap)
    printf "%ld\n", $etp_proc->old_hend - $etp_proc->old_heap
  else
    printf "0\n"
  end
  printf "  Mbuf size: %ld\n", $etp_proc->mbuf_sz
  if (etp_smp_compiled)
    printf "  Msgq len: %ld (inner=%ld, outer=%ld)\n", ($etp_proc->msg.len + $etp_proc->msg_inq.len), $etp_proc->msg.len, $etp_proc->msg_inq.len
  else
    printf "  Msgq len: %d\n", $etp_proc->msg.len
  end
  printf "  Parent: "
  etp-1 $etp_proc->parent
  printf "\n  Pointer: (Process *) %p\n", $etp_proc
  end
end

document etp-process-info
%---------------------------------------------------------------------------
% etp-process-info Process*
% 
% Print info about process
%---------------------------------------------------------------------------
end

define etp-processes
  if (!erts_initialized)
    printf "No processes, since system isn't initialized!\n"
  else
    set $proc_ix = 0
    while $proc_ix < erts_proc.r.o.max
      set $proc = (Process *) *((UWord *) &erts_proc.r.o.tab[$proc_ix])
      if ($proc != ((Process *) 0) && $proc != &erts_invalid_process)
        printf "---\n"
        printf "  Pix: %d\n", $proc_ix
        etp-process-info $proc
      end
      set $proc_ix++
    end
    printf "---\n",
  end
end

document etp-processes
%---------------------------------------------------------------------------
% etp-processes
%
% Print misc info about all processes
%---------------------------------------------------------------------------
end

define etp-processes-memory
  if (!erts_initialized)
    printf "No processes, since system isn't initialized!\n"
  else
    set $proc_ix = 0
    printf "--- (%ld processes in wheel)\n", erts_proc.r.o.max
    while $proc_ix < erts_proc.r.o.max
      set $proc = (Process *) *((UWord *) &erts_proc.r.o.tab[$proc_ix])
      if ($proc != ((Process *) 0) && $proc != &erts_invalid_process)
        etp-process-memory-info $proc
      end
      set $proc_ix++
    end
    printf "---\n",
  end
end

document etp-processes-memory
%---------------------------------------------------------------------------
% etp-processes-memory
%
% Print memory info about all processes
%---------------------------------------------------------------------------
end

define etp-process-memory-info
# Args: Process*
#
  set $etp_pmem_proc = ((Process *) $arg0)
  if ((*(((Uint32 *) &($etp_pmem_proc->state)))) & 0x400000)
    set $proxy_process = 1
  else
    set $proxy_process = 0
  end
  printf "  "
  etp-1 $etp_pmem_proc->common.id
  printf ": (Process *) %p ", $etp_pmem_proc
  if $proxy_process != 0
    printf "(Process *) %p ", $etp_pmem_proc
    printf "  *** PROXY process struct *** refer to next: \n"
    etp-pid2proc-1 $etp_pmem_proc->common.id
    printf " -"
    etp-process-memory-info $proc
  else
    printf " [Heap: %5ld", $etp_pmem_proc->heap_sz
    if ($etp_pmem_proc->old_heap)
      printf " | %5ld", $etp_pmem_proc->old_hend - $etp_pmem_proc->old_heap
    else
      printf " | none "
    end
    printf "] [Mbuf: %5ld", $etp_pmem_proc->mbuf_sz
    if (etp_smp_compiled)
      printf " | %3ld (%3ld | %3ld)", ($etp_pmem_proc->msg.len + $etp_pmem_proc->msg_inq.len), $etp_pmem_proc->msg.len, $etp_pmem_proc->msg_inq.len
    else
      printf " | %3ld", $etp_pmem_proc->msg.len
    end
    printf "] "
    if ($etp_pmem_proc->i)
      printf " I: "
      etp-cp-1 $etp_pmem_proc->i
      printf " "
    end

    if ($etp_pmem_proc->current)
      etp-1 $etp_pmem_proc->current[0]
      printf ":"
      etp-1 $etp_pmem_proc->current[1]
      printf "/%d ", $etp_pmem_proc->current[2]
    end

    if (*(((Uint32 *) &(((Process *) $etp_pmem_proc)->state))) & 0x4) == 0
      if ($etp_pmem_proc->common.u.alive.reg)
        etp-1 $etp_pmem_proc->common.u.alive.reg->name
        printf " "
      end
    end

    if ($etp_pmem_proc->cp)
      printf " CP: "
      etp-cp-1 $etp_pmem_proc->cp
      printf " "
    end
    printf "\n"
  end
end

document etp-process-memory-info
%---------------------------------------------------------------------------
% etp-process-memory-info Process*
%
% Print memory info about process
%---------------------------------------------------------------------------
end

define etp-port-id2pix-1
# Args: Eterm
#
   if (etp_arch_bits == 64)
      if (etp_endianness > 0)
      	 set $etp_pix = (int) (((Uint64) $arg0) & 0x0fffffff)
      elser
      	 set $etp_pix = (int) ((((Uint64) $arg0) >> 32) & 0x0fffffff)
      end
   else
      set $etp_pix =  (int) ((((Uint32) $arg0) >> 4) & erts_port.r.o.pix_mask)
   end
end

define etp-pix2port
# Args: Eterm
#
   set $port = (Port *) *((UWord *) &erts_port.r.o.tab[((int) $arg0)])
   printf "(Port *) %p\n", $port
end

define etp-id2port-1
# Args: Eterm
#
  etp-port-id2pix-1 $arg0
  set $port = (Port *) *((UWord *) &erts_port.r.o.tab[((int) $etp_pix)])
end

define etp-id2port
# Args: Eterm
#
   etp-id2port-1 $arg0
   printf "(Port *) %p\n", $port
end

define etp-port-sched-flags-int
# Args: int
#
  if ($arg0 & 0x1)
    printf " in-run-queue"
  end
  if ($arg0 & 0x2)
    printf " executing"
  end
  if ($arg0 & 0x4)
    printf " have-tasks"
  end
  if ($arg0 & 0x8)
    printf " exited"
  end
  if ($arg0 & 0x10)
    printf " busy-port"
  end
  if ($arg0 & 0x20)
    printf " busy-port-q"
  end
  if ($arg0 & 0x40)
    printf " chk-unset-busy-port-q"
  end
  if ($arg0 & 0x80)
    printf " have-busy-tasks"
  end
  if ($arg0 & 0x100)
    printf " have-nosuspend-tasks"
  end
  if ($arg0 & 0x200)
    printf " parallelism"
  end
  if ($arg0 & 0x400)
    printf " force-sched"
  end
  if ($arg0 & 0xfffff800)
    printf " GARBAGE"
  end
  printf "\n"
end

document etp-port-sched-flags-int
%---------------------------------------------------------------------------
% etp-proc-sched-flags-int int
% 
% Print port sched-flags
%---------------------------------------------------------------------------
end


define etp-port-sched-flags
# Args: Port*
#
  set $sched_flags_int = *(((Uint32 *) &(((Port *) $arg0)->sched.flags)))
  etp-port-sched-flags-int $sched_flags_int
end

document etp-port-sched-flags
%---------------------------------------------------------------------------
% etp-proc-sched-flags-int Port *
% 
% Print port sched-flags
%---------------------------------------------------------------------------
end

define etp-port-state-int
# Args: int
#
  if ($arg0 & 0x1)
    printf " connected"
  end
  if ($arg0 & 0x2)
    printf " exiting"
  end
  if ($arg0 & 0x4)
    printf " distribution"
  end
  if ($arg0 & 0x8)
    printf " binary-io"
  end
  if ($arg0 & 0x10)
    printf " soft-eof"
  end
  if ($arg0 & 0x20)
    printf " closing"
  end
  if ($arg0 & 0x40)
    printf " send-closed"
  end
  if ($arg0 & 0x80)
    printf " linebuf-io"
  end
  if ($arg0 & 0x100)
    printf " free"
  end
  if ($arg0 & 0x200)
    printf " initializing"
  end
  if ($arg0 & 0x400)
    printf " port-specific-lock"
  end
  if ($arg0 & 0x800)
    printf " invalid"
  end
  if ($arg0 & 0x1000)
    printf " halt"
  end
  if (etp_debug_compiled)
    if ($arg0 & 0x7fffe000)
      printf " GARBAGE"
    end
  else
    if ($arg0 & 0xffffe000)
      printf " GARBAGE"
    end
  end
  printf "\n"
end

document etp-port-state-int
%---------------------------------------------------------------------------
% etp-proc-state-int int
% 
% Print port state
%---------------------------------------------------------------------------
end


define etp-port-state
# Args: Port*
#
  set $state_int = *(((Uint32 *) &(((Port *) $arg0)->state)))
  etp-port-state-int $state_int
end

document etp-port-state
%---------------------------------------------------------------------------
% etp-proc-state-int Port *
% 
% Print port state
%---------------------------------------------------------------------------
end

define etp-port-info
# Args: Port*
#
  printf "  Port: "
  set $etp_pinfo_port = ((Port*)$arg0)
  etp-1 $etp_pinfo_port->common.id
  printf "\n  Name: %s\n", $etp_pinfo_port->name
  printf "  State:"
  etp-port-state $etp_pinfo_port
  printf "  Scheduler flags:"
  etp-port-sched-flags $etp_pinfo_port
  if (*(((Uint32 *) &($etp_pinfo_port->state))) & 0x5C00) == 0
    if ($etp_pinfo_port->common.u.alive.reg)
      printf "  Registered name: "
      etp-1 $etp_pinfo_port->common.u.alive.reg->name
      printf "\n"
    end
  end
  printf "  Connected: "
  set $connected = *(((Eterm *) &(((Port *) $etp_pinfo_port)->connected)))
  etp-1 $connected
  printf "\n  Pointer: (Port *) %p\n", $etp_pinfo_port
end

document etp-port-info
%---------------------------------------------------------------------------
% etp-port-info Port*
% 
% Print info about port
%---------------------------------------------------------------------------
end


define etp-ports
  if (!erts_initialized)
    printf "No ports, since system isn't initialized!\n"
  else
    set $port_ix = 0
    while $port_ix < erts_port.r.o.max
      set $port = (Port *) *((UWord *) &erts_port.r.o.tab[$port_ix])
      if ($port != ((Port *) 0) && $port != &erts_invalid_port)
        if (*(((Uint32 *) &(((Port *) $port)->state))) & 0x100) == 0
          # I.e, not free
          printf "---\n"
          printf "  Pix: %d\n", $port_ix
          etp-port-info $port
        end
      end
      set $port_ix++
    end
    printf "---\n",
  end
end

document etp-ports
%---------------------------------------------------------------------------
% etp-ports
% 
% Print misc info about all ports
%---------------------------------------------------------------------------
end

define etp-rq-flags-int
# Args: int
#
  if ($arg0 & 0x1f)
    printf "  Queue Mask:"
    if ($arg0 & 0x1)
      printf " max"
    end
    if ($arg0 & 0x2)
      printf " high"
    end
    if ($arg0 & 0x4)
      printf " normal"
    end
    if ($arg0 & 0x8)
      printf " low"
    end
    if ($arg0 & 0x10)
      printf " ports"
    end
    printf "\n"
  end

  if ($arg0 & 0x3fe0)
    printf "  Emigrate Mask:"
    if ($arg0 & 0x20)
      printf " max"
    end
    if ($arg0 & 0x40)
      printf " high"
    end
    if ($arg0 & 0x80)
      printf " normal"
    end
    if ($arg0 & 0x100)
      printf " low"
    end
    if ($arg0 & 0x200)
      printf " ports"
    end
    printf "\n"
  end

  if ($arg0 & 0x7fc00)
    printf "  Immigrate Mask:"
    if ($arg0 & 0x400)
      printf " max"
    end
    if ($arg0 & 0x800)
      printf " high"
    end
    if ($arg0 & 0x1000)
      printf " normal"
    end
    if ($arg0 & 0x2000)
      printf " low"
    end
    if ($arg0 & 0x4000)
      printf " ports"
    end
    printf "\n"
  end

  if ($arg0 & 0xf8000)
    printf "  Evaquate Mask:"
    if ($arg0 & 0x8000)
      printf " max"
    end
    if ($arg0 & 0x10000)
      printf " high"
    end
    if ($arg0 & 0x20000)
      printf " normal"
    end
    if ($arg0 & 0x40000)
      printf " low"
    end
    if ($arg0 & 0x80000)
      printf " ports"
    end
    printf "\n"
  end

  if ($arg0 & ~0xfffff)
    printf "  Misc Flags:"
    if ($arg0 & 0x100000)
      printf " out-of-work"
    end
    if ($arg0 & 0x200000)
      printf " halftime-out-of-work"
    end
    if ($arg0 & 0x400000)
      printf " suspended"
    end
    if ($arg0 & 0x800000)
      printf " check-cpu-bind"
    end
    if ($arg0 & 0x1000000)
      printf " inactive"
    end
    if ($arg0 & 0x2000000)
      printf " non-empty"
    end
    if ($arg0 & 0x4000000)
      printf " protected"
    end
    if ($arg0 & 0x8000000)
      printf " exec"
    end
    if ($arg0 & 0x10000000)
      printf " msb_exec"
    end
    if ($arg0 & 0x20000000)
      printf " misc_op"
    end
    if ($arg0 & 0x40000000)
      printf " halting"
    end
    if ($arg0 & ~0x7fffffff)
      printf " GARBAGE(0x%x)", ($arg0 & ~0x7fffffff)
    end
    printf "\n"
  end
end

document etp-rq-flags-int
%---------------------------------------------------------------------------
% etp-rq-flags-int
% 
% Print run queue flags
%---------------------------------------------------------------------------
end

define etp-ssi-flags
# Args: int
#
  if ($arg0 & 0x1)
    printf " sleeping"
  end
  if ($arg0 & 0x2)
    printf " poll"
  end
  if ($arg0 & 0x4)
    printf " tse"
  end
  if ($arg0 & 0x8)
    printf " waiting"
  end
  if ($arg0 & 0x10)
    printf " suspended"
  end
  if ($arg0 & 0x20)
    printf " msb_exec"
  end
  printf "\n"
end

document etp-ssi-flags
%---------------------------------------------------------------------------
% etp-ssi-flags
% Arg int
% 
% Print aux work flags
%---------------------------------------------------------------------------
end

define etp-aux-work-flags
# Args: int
#
  if ($arg0 & 0x1)
    printf " delayed-dealloc"
  end
  if ($arg0 & 0x2)
    printf " delayed-dealloc-thr-prgr"
  end
  if ($arg0 & 0x4)
    printf " fix-alloc-dealloc"
  end
  if ($arg0 & 0x8)
    printf " fix-alloc-lower-lim"
  end
  if ($arg0 & 0x10)
    printf " async-ready"
  end
  if ($arg0 & 0x20)
    printf " async-ready-clean"
  end
  if ($arg0 & 0x40)
    printf " misc-work-thr-prgr"
  end
  if ($arg0 & 0x80)
    printf " misc-work"
  end
  if ($arg0 & 0x100)
    printf " check-children"
  end
  if ($arg0 & 0x200)
    printf " set-tmo"
  end
  if ($arg0 & 0x400)
    printf " mseg-cached-check"
  end
  if ($arg0 & ~0x7ff)
    printf " GARBAGE"
  end
  printf "\n"
end

document etp-aux-work-flags
%---------------------------------------------------------------------------
% etp-aux-work-flags
% Arg int
% 
% Print aux work flags
%---------------------------------------------------------------------------
end

define etp-schedulers
  if (!erts_initialized)
    printf "No schedulers, since system isn't initialized!\n"
  else
    set $sched_type = 0
    set $sched_ix = 0
    while $sched_ix < erts_no_schedulers
      etp-scheduler-info-internal
      etp-run-queue-info-internal
      set $sched_ix++
    end
    printf "---------------------\n"
    if (erts_no_dirty_cpu_schedulers)
       printf "\n\n"
       set $sched_type = 1
       set $sched_ix = 0
       while $sched_ix < erts_no_dirty_cpu_schedulers
         etp-scheduler-info-internal
         set $sched_ix++
       end
       etp-run-queue-info-internal
       printf "---------------------\n"
    end
    if (erts_no_dirty_io_schedulers)
       printf "\n\n"
       set $sched_type = 2
       set $sched_ix = 0
       while $sched_ix < erts_no_dirty_io_schedulers
         etp-scheduler-info-internal
         set $sched_ix++
       end
       etp-run-queue-info-internal
       printf "---------------------\n"
    end
  end
end

document etp-schedulers
%---------------------------------------------------------------------------
% etp-schedulers
%
% Print misc info about all schedulers
%---------------------------------------------------------------------------
end

define etp-scheduler-info-internal
  if ($sched_type == 0)
    printf "--- Scheduler %d ---\n", $sched_ix+1
    set $sched_data=&erts_aligned_scheduler_data[$sched_ix].esd
  else
    if ($sched_type == 1)
      printf "--- Dirty CPU Scheduler %d ---\n", $sched_ix+1
      set $sched_data=&erts_aligned_dirty_cpu_scheduler_data[$sched_ix].esd
    else
      printf "--- Dirty I/O Scheduler %d ---\n", $sched_ix+1
      set $sched_data=&erts_aligned_dirty_io_scheduler_data[$sched_ix].esd
    end
  end
  printf " IX: %d\n", $sched_ix
  if ($sched_data->cpu_id < 0)
    printf " CPU Binding: unbound\n"
  else
    printf " CPU Binding: %d\n", $sched_data->cpu_id
  end
  printf " Aux work Flags:"
  set $aux_work_flags = *((Uint32 *) &$sched_data->ssi->aux_work)
  etp-aux-work-flags $aux_work_flags
  printf " Sleep Info Flags:"
  set $ssi_flags = *((Uint32 *) &$sched_data->ssi->flags)
  etp-ssi-flags $ssi_flags
  printf " Pointer: (ErtsSchedulerData *) %p\n", $sched_data
end

define etp-run-queue-info-internal
  if ($sched_type == 0)
    printf " - Run Queue -\n"
    if (etp_smp_compiled)
      set $runq = erts_aligned_scheduler_data[$sched_ix].esd.run_queue
    else
      set $runq = &erts_aligned_run_queues[0].runq
    end
  else
    if ($sched_type == 1)
      printf "\n--- Dirty CPU Run Queue ---\n"
      set $runq = &erts_aligned_run_queues[-1].runq
    else
      printf "\n--- Dirty I/O Run Queue ---\n"
      set $runq = &erts_aligned_run_queues[-2].runq
    end
  end
  printf "  Length: total=%d", *((Uint32 *) &($runq->len))
  printf ", max=%d", *((Uint32 *) &($runq->procs.prio_info[0].len))
  printf ", high=%d", *((Uint32 *) &($runq->procs.prio_info[1].len))
  printf ", normal=%d", *((Uint32 *) &($runq->procs.prio_info[2].len))
  printf ", low=%d", *((Uint32 *) &($runq->procs.prio_info[3].len))
  printf ", port=%d\n", *((Uint32 *) &($runq->ports.info.len))
  if ($runq->misc.start)
    printf "  Misc Jobs: yes\n"
  else
    printf "  Misc Jobs: no\n"
  end
  set $rq_flags = *((Uint32 *) &($runq->flags))
  etp-rq-flags-int $rq_flags
  printf "  Pointer: (ErtsRunQueue *) %p\n", $runq
end

define etp-disasm-1
  set $code_ptr = ((BeamInstr*)$arg0)
  set $addr = *$code_ptr
  set $i = 0
  while $i < (sizeof(opc) / sizeof(OpEntry))
    if $addr == beam_ops[$i]
      printf "%s %d", opc[$i].name, opc[$i].sz
      set $next_i = $code_ptr + opc[$i].sz
      set $i += 4999
    end
    set $i++
  end
end

define etp-disasm
  etp-cp-func-info-1 $arg0
  if $etp_cp_p == 0
    printf "invalid argument"
  else
    etp-mfa-1 $etp_cp_p $cp_cp_p_offset
    printf ": "
    etp-disasm-1 $arg0
    printf "\r\n"
    while $next_i < ((BeamInstr*)$arg1)
      set $prev_i = $next_i
      etp-cp-func-info-1 $next_i
      etp-mfa-1 $etp_cp_p $cp_cp_p_offset
      printf ": "
      etp-disasm-1 $next_i
      if $prev_i == $next_i
        # ptr did not advance, we are inside some strange opcode with argument
        set $next_i++
        printf "instr argument"
      end
      printf "\r\n"
    end
  end
end

############################################################################
#
# Timer Wheel
#

define etp-timer-wheel
# Args: TimerWheel
  if (!erts_initialized)
    printf "System not initialized!\n"
  else
    set $tiw = $arg0
    printf "Number of timers: %d\n", $tiw->nto
    printf "Min timeout pos: %d\n", $tiw->next_timeout_pos
    printf "\n--- Soon Wheel ---\n"
    set $ix = $tiw->pos & etp_tw_soon_wheel_mask
    printf "Position: %ld (%d)\n", $tiw->pos, $ix
    printf "Min timeout position: %ld (%d)\n", $tiw->soon.min_tpos, $tiw->soon.min_tpos & etp_tw_soon_wheel_mask
    printf "Number of timers: %d\n", $tiw->soon.nto
    set $slots = etp_tw_soon_wheel_size
    while $slots > 0
      set $tmr = $tiw->w[$ix]
      if ($tmr != (ErtsTWheelTimer *) 0x0)
        printf "---\n"
        printf "Slot: %d\n", $ix
        printf "\n"
        while 1
           printf "- Timeout pos: %ld\n", $tmr->timeout_pos
	   printf "  Pointer: (ErtsTWheelTimer *) %p\n", $tmr
           set $tmr = $tmr->next
           if ($tmr == $tiw->w[$ix])
             loop_break
           end
        end
      end
      set $ix++
      if ($ix == (etp_tw_soon_wheel_first_slot + etp_tw_soon_wheel_size))
        set $ix = etp_tw_soon_wheel_first_slot
      end
      set $slots--
    end
    printf "\n--- Later Wheel ---\n"
    set $ix = (($tiw->later.pos >> etp_tw_later_wheel_shift) & etp_tw_later_wheel_mask) + etp_tw_later_wheel_first_slot
    printf "Position: %ld (%d)\n", $tiw->later.pos, $ix
    printf "Min timeout position: %ld (%d)\n", $tiw->later.min_tpos, (($tiw->later.min_tpos >> etp_tw_later_wheel_shift) & etp_tw_later_wheel_mask) + etp_tw_later_wheel_first_slot
    printf "Number of timers: %d\n", $tiw->later.nto
    set $slots = etp_tw_later_wheel_size
    set $slot_pos = $tiw->later.pos
    while $slots > 0
      set $tmr = $tiw->w[$ix]
      if ($tmr != (ErtsTWheelTimer *) 0x0)
        printf "---\n"
        printf "Slot: %d\n", $ix
        printf "Slot Range: [%ld, %ld]\n", $slot_pos, $slot_pos + etp_tw_later_wheel_slot_size
        printf "Pre timeout pos: %ld\n", $slot_pos - etp_tw_later_wheel_slot_size
        printf "\n"
        while 1
           printf "- Timeout pos: %ld\n", $tmr->timeout_pos
	   printf "  Pointer: (ErtsTWheelTimer *) %p\n", $tmr
           set $tmr = $tmr->next
           if ($tmr == $tiw->w[$ix])
             loop_break
           end
        end
      end
      set $ix++
      if ($ix == (etp_tw_later_wheel_first_slot + etp_tw_later_wheel_size))
        set $ix = etp_tw_later_wheel_first_slot
      end
      set $slot_pos = $slot_pos + etp_tw_later_wheel_slot_size
      set $slots--
    end
  end
  printf "---\n"
end

document etp-disasm
%---------------------------------------------------------------------------
% etp-disasm StartI EndI
%
% Disassemble the code between StartI and EndI
%---------------------------------------------------------------------------
end

define etp-migration-info
  set $minfo = (ErtsMigrationPaths *) *((UWord *) &erts_migration_paths)
  set $rq_ix = 0
  while $rq_ix < erts_no_run_queues
    if ($minfo->mpath[$rq_ix])
      printf "---\n"
      printf "Run Queue Ix: %d\n", $rq_ix
      etp-rq-flags-int $minfo->mpath[$rq_ix].flags
    end
    set $rq_ix++
  end
end

document etp-migration-info
%---------------------------------------------------------------------------
% etp-migration-info
% 
% Print migration information
%---------------------------------------------------------------------------
end

define etp-system-info
  printf "--------------- System Information ---------------\n"
  printf "OTP release: %s\n", etp_otp_release
  printf "ERTS version: %s\n", etp_erts_version
  printf "Compile date: %s\n", etp_compile_date
  printf "Arch: %s\n", etp_arch
  printf "Endianness: "
  if (etp_endianness > 0)
    printf "Big\n"
  else
    if (etp_endianness < 0)
      printf "Little\n"
    else
      printf "Unknown\n"
    end
  end
  printf "Word size: %d-bit\n", etp_arch_bits
  printf "HiPE support: "
  if (etp_hipe)
    printf "yes\n"
  else
    printf "no\n"
  end
  if (etp_smp_compiled)
    printf "SMP support: yes\n"
  else
    printf "SMP support: no\n"
  end
  printf "Thread support: "
  if (etp_thread_compiled)
    printf "yes\n"
  else
    printf "no\n"
  end
  printf "Kernel poll: "
  if (etp_kernel_poll_support)
    if (!erts_initialized)
        printf "Supported\n"
    else
      if (erts_use_kernel_poll)
        printf "Supported and used\n"
      else
        printf "Supported but not used\n"
      end
    end
  else
    printf "No support\n"
  end
  printf "Debug compiled: "
  if (etp_debug_compiled)
    printf "yes\n"
  else
    printf "no\n"
  end
  printf "Lock checking: "
  if (etp_lock_check)
    printf "yes\n"
  else
    printf "no\n"
  end
  printf "Lock counting: "
  if (etp_lock_count)
    printf "yes\n"
  else
    printf "no\n"
  end

  if (!erts_initialized)
    printf "System not initialized\n"
  else
    printf "Node name: "
    etp-1 erts_this_node->sysname
    printf "\n"
    printf "Number of schedulers: %d\n", erts_no_schedulers
    printf "Number of async-threads: %d\n", erts_async_max_threads
  end
  printf "--------------------------------------------------\n"
end

document etp-system-info
%---------------------------------------------------------------------------
% etp-system-info
% 
% Print general information about the system
%---------------------------------------------------------------------------
end

define etp-compile-info
  printf "--------------- Compile Information ---------------\n"
  printf "CFLAGS: %s\n", erts_build_flags_CFLAGS
  printf "LDFLAGS: %s\n", erts_build_flags_LDFLAGS
  printf "Use etp-config-h-info to dump config.h\n"
end

document etp-compile-info
%---------------------------------------------------------------------------
% etp-compile-info
%
% Print information about how the system was compiled
%---------------------------------------------------------------------------
end

define etp-config-h-info
  printf "%s", erts_build_flags_CONFIG_H
end

document etp-config-h-info
%---------------------------------------------------------------------------
% etp-config-h-info
%
% Dump the contents of config.h when the system was compiled
%---------------------------------------------------------------------------
end

define etp-dictdump
# Args: ProcDict*
#
# Non-reentrant
#
  set $etp_dictdump = ($arg0)
  if $etp_dictdump
    set $etp_dictdump_n = \
      $etp_dictdump->homeSize + $etp_dictdump->splitPosition
    set $etp_dictdump_i = 0
    set $etp_dictdump_written = 0
    if $etp_dictdump_n > $etp_dictdump->size
      set $etp_dictdump_n = $etp_dictdump->size
    end
    set $etp_dictdump_cnt = $etp_dictdump->numElements
    printf "%% Dictionary (%d):\n[", $etp_dictdump_cnt
    while $etp_dictdump_i < $etp_dictdump_n && \
          $etp_dictdump_cnt > 0
      set $etp_dictdump_p = $etp_dictdump->data[$etp_dictdump_i]
      if $etp_dictdump_p != $etp_nil
        if ((Eterm)$etp_dictdump_p & 0x3) == 0x2
          # Boxed
          if $etp_dictdump_written
            printf ",\n "
          else
            set $etp_dictdump_written = 1
          end
          etp-1 $etp_dictdump_p 0
          set $etp_dictdump_cnt--
        else
          while ((Eterm)$etp_dictdump_p & 0x3) == 0x1 && \
                $etp_dictdump_cnt > 0
            # Cons ptr
            if $etp_dictdump_written
              printf ",\n "
            else
              set $etp_dictdump_written = 1
            end
            etp-1 (((Eterm*)((Eterm)$etp_dictdump_p&~0x3))[0]) 0
            set $etp_dictdump_cnt--
            set $etp_dictdump_p = ((Eterm*)((Eterm)$etp_dictdump_p & ~0x3))[1]
          end
          if $etp_dictdump_p != $etp_nil
            printf "#DictSlotError<%d>:", $etp_dictdump_i
	    set $etp_dictdump_flat = $etp_flat
	    set $etp_flat = 1
            etp-1 ((Eterm)$etp_dictdump_p) 0
	    set $etp_flat = $etp_dictdump_flat
          end
        end
      end
      set $etp_dictdump_i++
    end
    if $etp_dictdump_cnt != 0
      printf "#DictCntError<%d>, ", $etp_dictdump_cnt
    end
  else
    printf "%% Dictionary (0):\n["
  end
  printf "].\n"
end

document etp-dictdump
%---------------------------------------------------------------------------
% etp-dictdump ErlProcDict*
% 
% Take an ErlProcDict* and print all entries in the process dictionary.
%---------------------------------------------------------------------------
end

define etpf-dictdump
# Args: ErlProcDict*
#
# Non-reentrant
#
  set $etp_flat = 1
  etp-dictdump ($arg0)
  set $etp_flat = 0
end

document etpf-dictdump
%---------------------------------------------------------------------------
% etpf-dictdump ErlProcDict*
% 
% Same as etp-dictdump but print the values using etpf (flat).
%---------------------------------------------------------------------------
end



define etp-offheapdump
# Args: ( ExternalThing* | ProcBin* | ErlFunThing* )
#
# Non-reentrant
#
  set $etp_offheapdump_p = ($arg0)
  set $etp_offheapdump_i = 0
  set $etp_offheapdump_
  printf "%% Offheap dump:\n["
  while ($etp_offheapdump_p != 0) && ($etp_offheapdump_i < $etp_max_depth)
    if ((Eterm)$etp_offheapdump_p & 0x3) == 0x0
      if $etp_offheapdump_i > 0
        printf ",\n "
      end
      etp-1 ((Eterm)$etp_offheapdump_p|0x2) 0
      set $etp_offheapdump_p = $etp_offheapdump_p->next
      set $etp_offheapdump_i++
    else
      printf "#TaggedPtr<%#x>", $etp_offheapdump_p
      set $etp_offheapdump_p = 0
    end
  end
  printf "].\n"
end

document etp-offheapdump
%---------------------------------------------------------------------------
% etp-offheapdump ( ExternalThing* | ProcBin* | ErlFunThing* )
% 
% Take an pointer to a linked list and print the terms in the list
% up to the max depth.
%---------------------------------------------------------------------------
end

define etpf-offheapdump
# Args: ( ExternalThing* | ProcBin* | ErlFunThing* )
#
# Non-reentrant
#
  set $etp_flat = 1
  etp-offheapdump ($arg0)
  set $etp_flat = 0
end

document etpf-offheapdump
%---------------------------------------------------------------------------
% etpf-offheapdump ( ExternalThing* | ProcBin* | ErlFunThing* )
% 
% Same as etp-offheapdump but print the values using etpf (flat).
%---------------------------------------------------------------------------
end

define etp-search-heaps
# Args: Eterm
#
# Non-reentrant
#
  printf "%% Search all (<%u) process heaps for ", erts_max_processes
  set $etp_flat = 1
  etp-1 ($arg0) 0
  set $etp_flat = 0
  printf ":...\n"
  etp-search-heaps-1 ((Eterm*)((Eterm)($arg0)&~3))
end

define etp-search-heaps-1
# Args: Eterm*
#
# Non-reentrant
#
  set $etp_search_heaps_q = erts_max_processes / 10
  set $etp_search_heaps_r = erts_max_processes % 10
  set $etp_search_heaps_t = 10
  set $etp_search_heaps_m = $etp_search_heaps_q
  if $etp_search_heaps_r > 0
    set $etp_search_heaps_m++
    set $etp_search_heaps_r--
  end
  set $etp_search_heaps_i = 0
  set $etp_search_heaps_found = 0
  while $etp_search_heaps_i < erts_proc.r.o.max
    set $proc = (Process *) *((UWord *) &erts_proc.r.o.tab[$proc_ix])
    if $proc
      if ($proc->heap <= ($arg0)) && \
         (($arg0) < $proc->hend)
        printf "process_tab[%d]->heap+%d\n", $etp_search_heaps_i, \
               ($arg0)-$proc->heap
      end
      if ($proc->old_heap <= ($arg0)) && \
         (($arg0) <= $proc->old_hend)
        printf "process_tab[%d]->old_heap+%d\n", $etp_search_heaps_i, \
               ($arg0)-$proc->old_heap
      end
      set $etp_search_heaps_cnt = 0
      set $etp_search_heaps_p = $proc->mbuf
      while $etp_search_heaps_p && ($etp_search_heaps_cnt < $etp_max_depth)
        set $etp_search_heaps_cnt++
        if (&($etp_search_heaps_p->mem) <= ($arg0)) && \
           (($arg0) < &($etp_search_heaps_p->mem)+$etp_search_heaps_p->size)
          printf "process_tab[%d]->mbuf(%d)+%d\n", \
                 $etp_search_heaps_i, $etp_search_heaps_cnt, \
                 ($arg0)-&($etp_search_heaps_p->mem)
        end
        set $etp_search_heaps_p = $etp_search_heaps_p->next
      end
      if $etp_search_heaps_p
        printf "Process ix=%d %% Too many HeapFragments\n", \
               $etp_search_heaps_i
      end
    end
    set $etp_search_heaps_i++
    if $etp_search_heaps_i > $etp_search_heaps_m
      printf "%% %d%%...\n", $etp_search_heaps_t
      set $etp_search_heaps_t += 10
      set $etp_search_heaps_m += $etp_search_heaps_q
      if $etp_search_heaps_r > 0
        set $etp_search_heaps_m++
        set $etp_search_heaps_r--
      end
    end
  end
  printf "%% 100%%.\n"
end

document etp-search-heaps
%---------------------------------------------------------------------------
% etp-search-heaps Eterm
% 
% Search all process heaps in process_tab[], including the heap fragments
% (process_tab[]->mbuf) for the specified Eterm.
%---------------------------------------------------------------------------
end



define etp-search-alloc
# Args: Eterm
#
# Non-reentrant
#
  printf "%% Search allocated memory blocks for "
  set $etp_flat = 1
  etp-1 ($arg0) 0
  set $etp_flat = 0
  printf ":...\n"
  set $etp_search_alloc_n = sizeof(erts_allctrs) / sizeof(*erts_allctrs)
  set $etp_search_alloc_i = 0
  while $etp_search_alloc_i < $etp_search_alloc_n
    if erts_allctrs[$etp_search_alloc_i].alloc
      set $etp_search_alloc_f = (erts_allctrs+$etp_search_alloc_i)
      while ($etp_search_alloc_f->alloc == debug_alloc) || \
            ($etp_search_alloc_f->alloc == stat_alloc) || \
            ($etp_search_alloc_f->alloc == map_stat_alloc)
        set $etp_search_alloc_f = \
          (ErtsAllocatorFunctions_t*)$etp_search_alloc_f->extra
      end
      if ($etp_search_alloc_f->alloc != erts_sys_alloc) && \
         ($etp_search_alloc_f->alloc != erts_fix_alloc)
        if ($etp_search_alloc_f->alloc == erts_alcu_alloc) || \
           ($etp_search_alloc_f->alloc == erts_alcu_alloc_ts)
          # alcu alloc
          set $etp_search_alloc_e = (Allctr_t*)$etp_search_alloc_f->extra
          # mbc_list
          set $etp_search_alloc_p = $etp_search_alloc_e->mbc_list.first
          set $etp_search_alloc_cnt = 0
          while $etp_search_alloc_p && \
                ($etp_search_alloc_cnt < $etp_max_depth)
            set $etp_search_alloc_cnt++
            if $etp_search_alloc_p <= ($arg0) && \
               ($arg0) < (char*)$etp_search_alloc_p + \
                         ($etp_search_alloc_p->chdr & (Uint)~7)
              printf "erts_allctrs[%d] %% %salloc: mbc_list: %d\n", \
                     $etp_search_alloc_i, $etp_search_alloc_e->name_prefix, \
                     $etp_search_alloc_cnt
            end
            if $etp_search_alloc_p == $etp_search_alloc_e->mbc_list.last
              if $etp_search_alloc_p->next
                printf \
                  "erts_allctrs[%d] %% %salloc: mbc_list.last error %p\n",\
                  $etp_search_alloc_i, $etp_search_alloc_e->name_prefix,\
                  $etp_search_alloc_p
              end
              set $etp_search_alloc_p = 0
            else
              set $etp_search_alloc_p = $etp_search_alloc_p->next
            end
          end
          if $etp_search_alloc_p
            printf "erts_allctrs[%d] %% %salloc: too large mbc_list %p\n", \
                   $ept_search_alloc_i, $etp_search_alloc_e->name_prefix,
                   $ept_search_alloc_p
          end
          # sbc_list
          set $etp_search_alloc_p = $etp_search_alloc_e->sbc_list.first
          set $etp_search_alloc_cnt = 0
          while $etp_search_alloc_p && \
                ($etp_search_alloc_cnt < $etp_max_depth)
            set $etp_search_alloc_cnt++
            if $etp_search_alloc_p <= ($arg0) && \
               ($arg0) < (char*)$etp_search_alloc_p + \
                         ($etp_search_alloc_p->chdr & (Uint)~7)
              printf "erts_allctrs[%d] %% %salloc: sbc_list: %d\n", \
                     $etp_search_alloc_i, $etp_search_alloc_e->name_prefix, \
                     $etp_search_alloc_cnt
            end
            if $etp_search_alloc_p == $etp_search_alloc_e->sbc_list.last
              if $etp_search_alloc_p->next
                printf \
                  "erts_allctrs[%d] %% %salloc: sbc_list.last error %p",\
                  $etp_search_alloc_i, $etp_search_alloc_e->name_prefix,\
                  $etp_search_alloc_p
              end
              set $etp_search_alloc_p = 0
            else
              set $etp_search_alloc_p = $etp_search_alloc_p->next
            end
          end
          if $etp_search_alloc_p
            printf "erts_allctrs[%d] %% %salloc: too large sbc_list %p\n", \
                   $ept_search_alloc_i, $etp_search_alloc_e->name_prefix,
                   $ept_search_alloc_p
          end
        else
          printf "erts_allctrs[%d] %% %s: unknown allocator\n", \
                 $etp_search_alloc_i, erts_alc_a2ad[$etp_search_alloc_i]
        end
      end
    end
    set $etp_search_alloc_i++
  end
end

document etp-search-alloc
%---------------------------------------------------------------------------
% etp-search-heaps Eterm
% 
% Search all internal allocator memory blocks for for the specified Eterm.
%---------------------------------------------------------------------------
end


define etp-alloc-stats
  printf "\nIx Name    Inst.   Blocks        Bytes    Carriers    Crr.bytes  Util\n"
  set $etp_tot_block_no = 0
  set $etp_tot_block_sz = 0
  set $etp_tot_crr_no = 0
  set $etp_tot_crr_sz = 0
  set $etp_ERTS_ALC_A_MIN = 1
  set $etp_ERTS_ALC_A_MAX = (sizeof(erts_allctrs) / sizeof(*erts_allctrs)) - 1

  set $etp_ix = $etp_ERTS_ALC_A_MIN
  while $etp_ix <= $etp_ERTS_ALC_A_MAX
    set $etp_allctr = 0
    set $etp_alloc = erts_allctrs[$etp_ix].alloc
    if $etp_alloc != erts_sys_alloc
      if $etp_alloc == erts_alcu_alloc_thr_spec || \
         $etp_alloc == erts_alcu_alloc_thr_pref
        set $etp_instance = 0
        set $etp_block_no = 0
        set $etp_block_sz = 0
        set $etp_crr_no = 0
        set $etp_crr_sz = 0
        set $etp_tspec = (ErtsAllocatorThrSpec_t *) erts_allctrs[$etp_ix].extra
	if $etp_tspec->enabled
          while $etp_instance < $etp_tspec->size
            set $etp_allctr = $etp_tspec->allctr[$etp_instance]
            set $etp_block_no = $etp_block_no + $etp_allctr->mbcs.blocks.curr.no \
					      + $etp_allctr->sbcs.blocks.curr.no
            set $etp_block_sz = $etp_block_sz + $etp_allctr->mbcs.blocks.curr.size \
					      + $etp_allctr->sbcs.blocks.curr.size
            set $etp_crr_no = $etp_crr_no + $etp_allctr->mbcs.curr.norm.mseg.no \
					  + $etp_allctr->sbcs.curr.norm.mseg.no \
					  + $etp_allctr->mbcs.curr.norm.sys_alloc.no \
					  + $etp_allctr->sbcs.curr.norm.sys_alloc.no
            set $etp_crr_sz = $etp_crr_sz + $etp_allctr->mbcs.curr.norm.mseg.size \
					  + $etp_allctr->sbcs.curr.norm.mseg.size \
					  + $etp_allctr->mbcs.curr.norm.sys_alloc.size \
					  + $etp_allctr->sbcs.curr.norm.sys_alloc.size
            set $etp_instance = $etp_instance + 1
          end
	else
          printf "erts_allctr[%d]: Disabled (thread specific)\n", $etp_ix
	end
      else
        if $etp_alloc == erts_alcu_alloc_ts || $etp_alloc == erts_alcu_alloc
          set $etp_allctr = (Allctr_t*) erts_allctrs[$etp_ix].extra
          set $etp_block_no = $etp_allctr->mbcs.blocks.curr.no \
			    + $etp_allctr->sbcs.blocks.curr.no
          set $etp_block_sz = $etp_allctr->mbcs.blocks.curr.size \
			    + $etp_allctr->sbcs.blocks.curr.size
          set $etp_crr_no = $etp_allctr->mbcs.curr.norm.mseg.no \
			  + $etp_allctr->sbcs.curr.norm.mseg.no \
			  + $etp_allctr->mbcs.curr.norm.sys_alloc.no \
			  + $etp_allctr->sbcs.curr.norm.sys_alloc.no
          set $etp_crr_sz = $etp_allctr->mbcs.curr.norm.mseg.size \
			  + $etp_allctr->sbcs.curr.norm.mseg.size \
			  + $etp_allctr->mbcs.curr.norm.sys_alloc.size \
			  + $etp_allctr->sbcs.curr.norm.sys_alloc.size
	  set $etp_instance = 1
        else
          printf "erts_allctr[%d]: Unknown allocation function: ", $etp_ix
          p $etp_alloc
        end
      end
    end
    if $etp_allctr != 0
      printf "%2d %-8s%2d%12lu%13lu%12lu%13lu", $etp_ix, $etp_allctr->name_prefix, \
	     $etp_instance, \
	     $etp_block_no, $etp_block_sz, $etp_crr_no, $etp_crr_sz
      if $etp_crr_sz != 0
        printf "%5lu%%", ($etp_block_sz * 100) / $etp_crr_sz
      end
      printf "\n"
      set $etp_tot_block_no = $etp_tot_block_no + $etp_block_no
      set $etp_tot_block_sz = $etp_tot_block_sz + $etp_block_sz
      set $etp_tot_crr_no = $etp_tot_crr_no + $etp_crr_no
      set $etp_tot_crr_sz = $etp_tot_crr_sz + $etp_crr_sz
    end
    set $etp_ix = $etp_ix + 1
  end
  printf "\nTotal:       %12lu%13lu%12lu%13lu", $etp_tot_block_no, $etp_tot_block_sz, \
				     $etp_tot_crr_no, $etp_tot_crr_sz
  if $etp_tot_crr_sz != 0
    printf "%5lu%%", ($etp_tot_block_sz * 100) / $etp_tot_crr_sz
  end
  printf "\n"
end

document etp-alloc-stats
%---------------------------------------------------------------------------
% etp-alloc-stats
%
% Combine and print allocator statistics
%---------------------------------------------------------------------------
end


define etp-alloc-instances
  set $etp_ERTS_ALC_A_MIN = 1
  set $etp_ERTS_ALC_A_MAX = (sizeof(erts_allctrs) / sizeof(*erts_allctrs)) - 1

  set $etp_ix = $arg0
  if $etp_ix >= $etp_ERTS_ALC_A_MIN && $etp_ix <= $etp_ERTS_ALC_A_MAX
    set $etp_allctr = 0
    set $etp_alloc = erts_allctrs[$etp_ix].alloc
    if $etp_alloc == erts_sys_alloc
      printf "Allocator %d is sys_alloc\n", $etp_ix
    else
      if $etp_alloc == erts_alcu_alloc_thr_spec || \
         $etp_alloc == erts_alcu_alloc_thr_pref
        set $etp_instance = 0
        set $etp_tspec = (ErtsAllocatorThrSpec_t *) erts_allctrs[$etp_ix].extra
	if $etp_tspec->enabled
          printf "All instances for allocator '%s'\n", $etp_tspec->allctr[0]->name_prefix
          while $etp_instance < $etp_tspec->size
	    p $etp_tspec->allctr[$etp_instance]
            set $etp_instance = $etp_instance + 1
          end
	else
          printf "erts_allctr[%d]: Disabled (thread specific)\n", $etp_ix
	end
      else
        if $etp_alloc == erts_alcu_alloc_ts || $etp_alloc == erts_alcu_alloc
          set $etp_allctr = (Allctr_t*) erts_allctrs[$etp_ix].extra
          printf "Single instances for allocator '%s'\n", $etp_allctr->name_prefix
	  p $etp_allctr
        else
          printf "erts_allctr[%d]: Unknown allocation function: ", $etp_ix
          p $etp_alloc
        end
      end
    end
  else
    printf "Allocator type not between %d and %d\n", $etp_ERTS_ALC_A_MIN, $etp_ERTS_ALC_A_MAX
  end
end

document etp-alloc-instances
%---------------------------------------------------------------------------
% etp-alloc-instances
%
% Print pointers to all allocator instances for a specific type (Ix)
%---------------------------------------------------------------------------
end




define etp-overlapped-heaps
# Args: 
#
# Non-reentrant
#
  printf "%% Dumping heap addresses to \"etp-commands.bin\"\n"
  set $etp_overlapped_heaps_q = erts_max_processes / 10
  set $etp_overlapped_heaps_r = erts_max_processes % 10
  set $etp_overlapped_heaps_t = 10
  set $etp_overlapped_heaps_m = $etp_overlapped_heaps_q
  if $etp_overlapped_heaps_r > 0
    set $etp_overlapped_heaps_m++
    set $etp_overlapped_heaps_r--
  end
  set $etp_overlapped_heaps_i = 0
  set $etp_overlapped_heaps_found = 0
  dump binary value etp-commands.bin 'o'
  append binary value etp-commands.bin 'v'
  append binary value etp-commands.bin 'e'
  append binary value etp-commands.bin 'r'
  append binary value etp-commands.bin 'l'
  append binary value etp-commands.bin 'a'
  append binary value etp-commands.bin 'p'
  append binary value etp-commands.bin 'p'
  append binary value etp-commands.bin 'e'
  append binary value etp-commands.bin 'd'
  append binary value etp-commands.bin '-'
  append binary value etp-commands.bin 'h'
  append binary value etp-commands.bin 'e'
  append binary value etp-commands.bin 'a'
  append binary value etp-commands.bin 'p'
  append binary value etp-commands.bin 's'
  append binary value etp-commands.bin '\0'
  while $etp_overlapped_heaps_i < erts_max_processes
    if process_tab[$etp_overlapped_heaps_i]
      append binary value etp-commands.bin \
        (Eterm)$etp_overlapped_heaps_i
      append binary value etp-commands.bin \
        (Eterm)process_tab[$etp_overlapped_heaps_i]->heap
      append binary value etp-commands.bin \
        (Eterm)process_tab[$etp_overlapped_heaps_i]->hend
      append binary value etp-commands.bin \
        (Eterm)process_tab[$etp_overlapped_heaps_i]->old_heap
      append binary value etp-commands.bin \
        (Eterm)process_tab[$etp_overlapped_heaps_i]->old_hend
      set $etp_overlapped_heaps_p = process_tab[$etp_overlapped_heaps_i]->mbuf
      set $etp_overlapped_heaps_cnt = 0
      while $etp_overlapped_heaps_p && \
            ($etp_overlapped_heaps_cnt < $etp_max_depth)
        set $etp_overlapped_heaps_cnt++
        append binary value etp-commands.bin \
          (Eterm)$etp_overlapped_heaps_p
        append binary value etp-commands.bin \
(Eterm)(&($etp_overlapped_heaps_p->mem)+$etp_overlapped_heaps_p->size)
        set $etp_overlapped_heaps_p = $etp_overlapped_heaps_p->next
      end
      if $etp_overlapped_heaps_p
        printf "process_tab[%d] %% Too many HeapFragments\n", \
               $etp_overlapped_heaps_i
      end
      append binary value etp-commands.bin (Eterm)0x0
      append binary value etp-commands.bin (Eterm)0x0
    end
    set $etp_overlapped_heaps_i++
    if $etp_overlapped_heaps_i > $etp_overlapped_heaps_m
      printf "%% %d%%...\n", $etp_overlapped_heaps_t
      set $etp_overlapped_heaps_t += 10
      set $etp_overlapped_heaps_m += $etp_overlapped_heaps_q
      if $etp_overlapped_heaps_r > 0
        set $etp_overlapped_heaps_m++
        set $etp_overlapped_heaps_r--
      end
    end
  end
  etp-run
end

document etp-overlapped-heaps
%---------------------------------------------------------------------------
% etp-overlapped-heaps
% 
% Dump all process heap addresses in process_tab[], including 
% the heap fragments in binary format on the file etp-commands.bin.
% Then call etp_commands:file/1 to analyze if any heaps overlap.
%
% Requires 'erl' in the path and 'etp_commands.beam' in 'erl's search path.
%---------------------------------------------------------------------------
end



define etp-chart
# Args: Process*
#
# Non-reentrant
  etp-chart-start ($arg0)
  set ($arg0) = ($arg0)
  etp-msgq (($arg0)->msg)
  etp-stackdump ($arg0)
  etp-dictdump (($arg0)->dictionary)
  etp-dictdump (($arg0)->debug_dictionary)
  printf "%% Dumping other process data...\n"
  etp ($arg0)->seq_trace_token
  etp ($arg0)->fvalue
  printf "%% Dumping done.\n"
  etp-chart-print
end

document etp-chart
%---------------------------------------------------------------------------
% etp-chart Process*
% 
% Dump all process data to the file "etp-commands.bin" and then use
% the Erlang support module to print a memory chart of all terms.
%---------------------------------------------------------------------------
end



define etp-chart-start
# Args: Process*
#
# Non-reentrant
  set $etp_chart = 1
  set $etp_chart_id = 0
  set $etp_chart_start_p = ($arg0)
  dump binary value etp-commands.bin 'c'
  append binary value etp-commands.bin 'h'
  append binary value etp-commands.bin 'a'
  append binary value etp-commands.bin 'r'
  append binary value etp-commands.bin 't'
  append binary value etp-commands.bin '\0'
  append binary value etp-commands.bin (Eterm)($etp_chart_start_p->heap)
  append binary value etp-commands.bin (Eterm)($etp_chart_start_p->high_water)
  append binary value etp-commands.bin (Eterm)($etp_chart_start_p->hend)
  append binary value etp-commands.bin (Eterm)($etp_chart_start_p->old_heap)
  append binary value etp-commands.bin (Eterm)($etp_chart_start_p->old_hend)
  set $etp_chart_start_cnt = 0
  set $etp_chart_start_p = $etp_chart_start_p->mbuf
  while $etp_chart_start_p && ($etp_chart_start_cnt < $etp_max_depth)
    set $etp_chart_start_cnt++
    append binary value etp-commands.bin (Eterm)($etp_chart_start_p->mem)
    append binary value etp-commands.bin (Eterm)($etp_chart_start_p->size)
    set $etp_chart_start_p = $etp_chart_start_p->next
  end
  append binary value etp-commands.bin (Eterm)(0)
  append binary value etp-commands.bin (Eterm)(0)
  if $etp_chart_start_p
    printf "%% Too many HeapFragments\n"
  end
end

document etp-chart-start
%---------------------------------------------------------------------------
% etp-chart-start Process*
% 
% Dump a chart head to the file "etp-commands.bin".
%---------------------------------------------------------------------------
end



define etp-chart-entry-1
# Args: Eterm, int depth, int words
#
# Reentrant capable
  if ($arg1) == 0
    set $etp_chart_id++
    printf "#%d:", $etp_chart_id
  end
  append binary value etp-commands.bin ($arg0)&~0x3
  append binary value etp-commands.bin (Eterm)(($arg2)*sizeof(Eterm))
  append binary value etp-commands.bin (Eterm)$etp_chart_id
  append binary value etp-commands.bin (Eterm)($arg1)
#   printf "<dumped %#x %lu %lu %lu>", ($arg0)&~0x3, \
#     (Eterm)(($arg2)*sizeof(Eterm)), (Eterm)$etp_chart_id, (Eterm)($arg1)
end



define etp-chart-print
  set $etp_chart = 0
  etp-run
end

document etp-chart-print
%---------------------------------------------------------------------------
% etp-chart-print Process*
% 
% Print a memory chart of the dumped data in "etp-commands.bin", and stop
% chart recording.
%---------------------------------------------------------------------------
end

############################################################################
# ETS table debug
#

define etp-ets-tables
# Args:
#
# Non-reentrant
  printf "%% Dumping < %lu ETS tables\n", (unsigned long)db_max_tabs
  while $etp_ets_tables_i < db_max_tabs
    if (meta_main_tab[$etp_ets_tables_i].u.next_free & 3) == 0
      printf "%% %d:", $etp_ets_tables_i
      etp-1 ((Eterm)(meta_main_tab[$etp_ets_tables_i].u.tb->common.id)) 0
      printf " "
      etp-1 ((Eterm)(meta_main_tab[$etp_ets_tables_i].u.tb->common.owner)) 0
      printf "\n"
    end
    set $etp_ets_tables_i++
  end
  set $etp_ets_tables_i = 0
end

document etp-ets-tables
%---------------------------------------------------------------------------
% etp-ets-tables
%
% Dump all ETS table names and their indexies.
%---------------------------------------------------------------------------
end

define etp-ets-obj
# Args: DbTerm*
#
  set $etp_ets_obj_i = 1
  while $etp_ets_obj_i <= (($arg0)->tpl[0] >> 6)
    if $etp_ets_obj_i == 1      
      printf "{"
    else
      printf ", "
    end
    set $etp_ets_elem = ($arg0)->tpl[$etp_ets_obj_i]
    if ($etp_ets_elem & 3) == 0
      printf "<compressed>"
    else
      etp-1 $etp_ets_elem 0
    end
    set $etp_ets_obj_i++
  end
  printf "}"
end


define etp-ets-tabledump
# Args: int tableindex
#
# Non-reentrant
  printf "%% Dumping ETS table %d:", ($arg0)
  set $etp_ets_tabledump_n = 0
  set $etp_ets_tabledump_t = meta_main_tab[($arg0)].u.tb
  set $etp_ets_tabledump_i = 0
  etp-1 ($etp_ets_tabledump_t->common.the_name) 0
  printf " status=%#x\n", $etp_ets_tabledump_t->common.status
  if $etp_ets_tabledump_t->common.status & 0x130
    # Hash table
    set $etp_ets_tabledump_h = $etp_ets_tabledump_t->hash
    printf "%% nitems=%d\n", (long) $etp_ets_tabledump_t->common.nitems
    while $etp_ets_tabledump_i < (long) $etp_ets_tabledump_h->nactive
      set $etp_ets_tabledump_seg = ((struct segment**)$etp_ets_tabledump_h->segtab)[$etp_ets_tabledump_i>>8]
      set $etp_ets_tabledump_l = $etp_ets_tabledump_seg->buckets[$etp_ets_tabledump_i&0xFF]
      if $etp_ets_tabledump_l
        printf "%% Slot %d:\n", $etp_ets_tabledump_i
        while $etp_ets_tabledump_l
          if $etp_ets_tabledump_n
            printf ","
          else
            printf "["
          end
          set $etp_ets_tabledump_n++
	  etp-ets-obj &($etp_ets_tabledump_l->dbterm)
          if $etp_ets_tabledump_l->hvalue == ((unsigned long)-1)
            printf "% *\n"
          else
            printf "\n"
          end
          set $etp_ets_tabledump_l = $etp_ets_tabledump_l->next
          if $etp_ets_tabledump_n >= $etp_max_depth
            set $etp_ets_tabledump_l = 0
          end
        end
      end
      set $etp_ets_tabledump_i++
    end
    if $etp_ets_tabledump_n
      printf "].\n"
    end
  else
    printf "%% Not a hash table\n"
  end
end

document etp-ets-tabledump
%---------------------------------------------------------------------------
% etp-ets-tabledump Slot
%
% Dump an ETS table with a specified slot index.
%---------------------------------------------------------------------------
end

define etp-lc-dump
# Non-reentrant
  set $etp_lc_dump_thread = erts_locked_locks
  while $etp_lc_dump_thread
    printf "Thread %s\n", $etp_lc_dump_thread->thread_name
    set $etp_lc_dump_thread_locked = $etp_lc_dump_thread->locked.first
    while $etp_lc_dump_thread_locked
      if 0 <= $etp_lc_dump_thread_locked->id && $etp_lc_dump_thread_locked->id < sizeof(erts_lock_order)/sizeof(erts_lc_lock_order_t)
        printf "  %s:", erts_lock_order[$etp_lc_dump_thread_locked->id].name
      else
        printf "  unkown:"
      end
      if ($etp_lc_dump_thread_locked->extra & 0x3) == 0x3
        etp-1 $etp_lc_dump_thread_locked->extra
      else
        printf "%p", $etp_lc_dump_thread_locked->extra
      end
      if ($etp_lc_dump_thread_locked->flags & (0x1f)) == (1 << 0)
        printf "[spinlock]"
      end
      if ($etp_lc_dump_thread_locked->flags & (0x1f)) == (1 << 1)
        printf "[rw(spin)lock]"
      end
      if ($etp_lc_dump_thread_locked->flags & (0x1f)) == (1 << 2)
        printf "[mutex]"
      end
      if ($etp_lc_dump_thread_locked->flags & (0x1f)) == (1 << 3)
        printf "[rwmutex]"
      end
      if ($etp_lc_dump_thread_locked->flags & (0x1f)) == (1 << 4)
        printf "[proclock]"
      end
      printf "(%s:%d)", $etp_lc_dump_thread_locked->file, $etp_lc_dump_thread_locked->line
      if ($etp_lc_dump_thread_locked->flags & (0x60)) == (1 << 5)
        printf "(r)"
      end
      if ($etp_lc_dump_thread_locked->flags & (0x60)) == ((1 << 5) | (1 << 6))
        printf "(rw)"
      end
      printf "\n"
      set $etp_lc_dump_thread_locked = $etp_lc_dump_thread_locked->next
    end
    set $etp_lc_dump_thread = $etp_lc_dump_thread->next
  end
end

document etp-lc-dump
%---------------------------------------------------------------------------
% etp-lc-dump
%
% Dump all info about locks in the lock checker
%---------------------------------------------------------------------------
end

define etp-ppc-stacktrace
# Args: R1
# Non-reentrant
  set $etp_ppc_st_fp = ($arg0)
  while $etp_ppc_st_fp
    info symbol ((void**)$etp_ppc_st_fp)[1]
    set $etp_ppc_st_fp = ((void**)$etp_ppc_st_fp)[0]
 end
end

document etp-ppc-stacktrace
%---------------------------------------------------------------------------
% etp-ppc-stacktrace R1
%
% Dump stacktrace from given $r1 frame pointer
%---------------------------------------------------------------------------
end

############################################################################
# OSE support
#
define etp-ose-attach
  target ose $arg0:21768
  attach block start_beam start_beam
end

document etp-ose-attach
%---------------------------------------------------------------------------
% etp-ose-attach Host
%
% Connect and attach to erlang vm at Host.
%---------------------------------------------------------------------------
end


############################################################################
# Erlang support module handling
#

define etp-run
  shell make -f "${ROOTDIR:?}/erts/etc/unix/etp_commands.mk" \
    ROOTDIR="${ROOTDIR:?}" ETP_DATA="etp-commands.bin"
end

document etp-run
%---------------------------------------------------------------------------
% etp-run
% 
% Make and run the Erlang support module on the input file 
% "erl-commands.bin". The environment variable ROOTDIR must
% be set to find $ROOTDIR/erts/etc/unix/etp_commands.mk.
%
% Also, erl and erlc must be in the path.
%---------------------------------------------------------------------------
end

define etp-thr
  source @ERL_TOP@/erts/etc/unix/etp-thr.py
end

############################################################################
# erl_alloc_util (blocks and carriers)
#

define etp-block-size-1
#
# In:  (Block_t*) in $arg0
# Out: Byte size in $etp_blk_sz
#
  if ($arg0)->bhdr & 1
      # Free block
      set $etp_blk_sz = ($arg0)->bhdr & ~7
  else
      # Allocated block
      if !$etp_MBC_ABLK_SZ_MASK
        if etp_arch_bits == 64
          set $etp_MBC_ABLK_OFFSET_SHIFT = (64 - 24)
        else
          set $etp_MBC_ABLK_OFFSET_SHIFT = (32 - 9)
        end
        set $etp_MBC_ABLK_SZ_MASK = ((UWord)1 << $etp_MBC_ABLK_OFFSET_SHIFT) - 1 - 7
      end
      set $etp_blk_sz = ($arg0)->bhdr & $etp_MBC_ABLK_SZ_MASK
  end
end

define etp-block2mbc-1
#
# In: (Block_t*) in $arg0
# Out: (Carrier_t*) in $etp-mbc
#
  if (($arg0)->bhdr) & 1
      # Free block
      set $etp_mbc = ($arg0)->u.carrier
  else
      # Allocated block
      if !$etp_MBC_ABLK_OFFSET_SHIFT
        if etp_arch_bits == 64
          set $etp_MBC_ABLK_OFFSET_SHIFT = (64 - 24)
        else
          set $etp_MBC_ABLK_OFFSET_SHIFT = (32 - 9)
        end
      end
      set $etp_mbc = (Carrier_t*) ((((UWord)($arg0) >> 18) - (($arg0)->bhdr >> $etp_MBC_ABLK_OFFSET_SHIFT)) << 18)
  end
end

define etp-block2mbc
  etp-block2mbc-1 ((Block_t*)$arg0)
  print $etp_mbc
end

document etp-block2mbc
%---------------------------------------------------------------------------
% Print pointer to multiblock carrier containing the argument (Block_t*)
%---------------------------------------------------------------------------
end

define etp-block
  etp-block-size-1 ((Block_t*)$arg0)
  if ((Block_t*)$arg0)->bhdr & 1
     printf "%#lx: FREE sz=%#x\n", ($arg0), $etp_blk_sz
  else
     printf "%#lx: ALLOCATED sz=%#x\n", ($arg0), $etp_blk_sz
  end
end

document etp-block
%---------------------------------------------------------------------------
% Print memory block (Block_t*)
%---------------------------------------------------------------------------
end

define etp-smp-atomic
  if (etp_smp_compiled)
    set $arg1 = (($arg0).counter)
  else
    set $arg1 = ($arg0)
  end
end

document etp-smp-atomic
%---------------------------------------------------------------------------
% Read an erts_smp_atomic_t value from $arg0 into $arg1
%---------------------------------------------------------------------------
end

define etp-carrier-blocks
  set $etp_crr = (Carrier_t*) $arg0
  etp-smp-atomic $etp_crr->allctr $etp_alc
  set $etp_alc = (Allctr_t*)($etp_alc & ~7)
  set $etp_crr_end = ((char*)$etp_crr + ($etp_crr->chdr & ~7) - (sizeof(void*) & ~8))
  set $etp_blk = (Block_t*) ((char*)$etp_crr + $etp_alc->mbc_header_size)
  set $etp_prev_blk = 0
  set $etp_error_cnt = 0
  set $etp_ablk_cnt = 0
  set $etp_fblk_cnt = 0
  set $etp_aborted = 0

  if $argc == 2
    set $etp_be_silent = $arg1
  else
    set $etp_be_silent = 0
  end

  while 1
    if !$etp_be_silent
      etp-block $etp_blk
    else
      etp-block-size-1 $etp_blk
    end
    etp-block2mbc-1 $etp_blk
    if $etp_mbc != $etp_crr
      printf "ERROR: Invalid carrier pointer %#lx in block at %#lx\n", $etp_mbc, $etp_blk
      set $etp_error_cnt = $etp_error_cnt + 1
    end
    if $etp_prev_blk
      if ($etp_prev_blk->bhdr & 1)
        # Prev is FREE
        if ($etp_blk->bhdr & 1)
          printf "ERROR: Adjacent FREE blocks at %#lx and %#lx\n", $etp_prev_blk, $etp_blk
	  set $etp_error_cnt = $etp_error_cnt + 1
        end
        if !($etp_blk->bhdr & 2)
          printf "ERROR: Missing PREV_FREE_BLK_HDR_FLG (2) in block at %#lx\n", $etp_blk
	  set $etp_error_cnt = $etp_error_cnt + 1
        end
      end
    end
    if $etp_blk->bhdr & 1
      set $etp_fblk_cnt = $etp_fblk_cnt + 1
    else
      set $etp_ablk_cnt = $etp_ablk_cnt + 1
    end
    if $etp_blk->bhdr & 4
      # Last block
      loop_break
    end
    # All free blocks except the last have a footer
    if ($etp_blk->bhdr & 1) && ((UWord*)((char*)$etp_blk + $etp_blk_sz))[-1] != $etp_blk_sz
      printf "ERROR: Invalid footer of free block at %#lx\n", $etp_blk
    end
    set $etp_prev_blk = $etp_blk
    set $etp_blk = (Block_t*) ((char*)$etp_blk + $etp_blk_sz)
    if $etp_blk < (Block_t*) ((char*)$etp_prev_blk + $etp_alc->min_block_size) || $etp_blk >= $etp_crr_end
      printf "ERROR: Invalid size of block at %#lx. ABORTING\n", $etp_prev_blk
      set $etp_aborted = 1
      loop_break
    end
  end

  if !$etp_aborted
    if ((char*)$etp_blk + $etp_blk_sz) != $etp_crr_end
      printf "ERROR: Last block not at end of carrier\n"
      set $etp_error_cnt = $etp_error_cnt + 1
    end
    printf "Allocated blocks: %u\n", $etp_ablk_cnt
    printf "Free      blocks: %u\n", $etp_fblk_cnt
  end
  if $etp_error_cnt
    printf "%u ERRORs reported above\n", $etp_error_cnt
  end
end

document etp-carrier-blocks
%---------------------------------------------------------------------------
% Check and (maybe) print all memory blocks in carrier
% Args: (Carrier_t*) [1=be_silent]
%---------------------------------------------------------------------------
end

define etp-address-to-beam-opcode
  set $etp_i = 0
  set $etp_min_diff = ((UWord)1 << (sizeof(UWord)*8 - 1))
  set $etp_min_opcode = -1
  set $etp_addr = (UWord) ($arg0)

  while $etp_i < num_instructions && $etp_min_diff > 0
    if ($etp_addr - (UWord)beam_ops[$etp_i]) < $etp_min_diff
      set $etp_min_diff = $etp_addr - (UWord)beam_ops[$etp_i]
      set $etp_min_opcode = $etp_i
    end
    set $etp_i = $etp_i + 1
  end
  if $etp_min_diff == 0
    printf "Address %p is start of '%s'\n", $etp_addr, opc[$etp_min_opcode].name
  else
    if $etp_min_opcode >= 0
      printf "Address is %ld bytes into opcode '%s' at %p\n", $etp_min_diff, opc[$etp_min_opcode].name, beam_ops[$etp_min_opcode]
    else
      printf "Invalid opcode address\n"
    end
  end
end

document etp-address-to-beam-opcode
%---------------------------------------------------------------------------
% Get beam opcode from a native instruction address (within process_main())
% Arg: Instructon pointer value
%
% Does not work with NO_JUMP_TABLE
%---------------------------------------------------------------------------
end

define etp-compile-debug
  shell (cd $ERL_TOP && make emulator FLAVOR=smp TYPE=debug)
end

document etp-compile-debug
%---------------------------------------------------------------------------
% Re-compile the debug erlang emulator
%---------------------------------------------------------------------------
end

define etp-compile
  shell (cd $ERL_TOP && make emulator)
end

document etp-compile
%---------------------------------------------------------------------------
% Re-compile the erlang emulator
%---------------------------------------------------------------------------
end


############################################################################
# Toolbox parameter handling
#

define etp-set-max-depth
  if ($arg0) > 0
    set $etp_max_depth = ($arg0)
  else
    echo %%%Error: max-depth <= 0 %%%\n
  end
end

document etp-set-max-depth
%---------------------------------------------------------------------------
% etp-set-max-depth Depth
% 
% Set the max term depth to use for etp. The term dept limit
% works in both depth and width, so if you set the max depth to 10,
% an 11 element flat tuple will be truncated.
%---------------------------------------------------------------------------
end

define etp-set-max-string-length
  if ($arg0) > 0
    set $etp_max_string_length = ($arg0)
  else
    echo %%%Error: max-string-length <= 0 %%%\n
  end
end

document etp-set-max-string-length
%---------------------------------------------------------------------------
% etp-set-max-strint-length Length
% 
% Set the max string length to use for ept when printing lists
% that can be shown as printable strings. Printable strings
% that are longer will be truncated, and not even checked if
% they really are printable all the way to the end.
%---------------------------------------------------------------------------
end

define etp-show
  printf "etp-set-max-depth %d\n", $etp_max_depth
  printf "etp-set-max-string-length %d\n", $etp_max_string_length
end

document etp-show
%---------------------------------------------------------------------------
% etp-show
% 
% Show the commands needed to set all etp parameters 
% to their current value.
%---------------------------------------------------------------------------
end

############################################################################
# Init
#

define etp-init
  set $etp_arch64 = (sizeof(void *) == 8)
  if $etp_arch64
    set $etp_nil = 0xfffffffffffffffb
  else
    set $etp_nil = 0xfffffffb
  end
  set $etp_flat = 0
  set $etp_chart_id = 0
  set $etp_chart = 0

  set $etp_max_depth = 20
  set $etp_max_string_length = 100

  set $etp_ets_tables_i = 0
end

document etp-init
%---------------------------------------------------------------------------
% Use etp-help for a command overview and general help.
% 
% To use the Erlang support module, the environment variable ROOTDIR
% must be set to the toplevel installation directory of Erlang/OTP,
% so the etp-commands file becomes:
%     $ROOTDIR/erts/etc/unix/etp-commands
% Also, erl and erlc must be in the path.
%---------------------------------------------------------------------------
end

etp-init
help etp-init
etp-show
etp-system-info