path: root/lib/asn1/doc/src/asn1ct.xml

<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>1997</year><year>2010</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      The contents of this file are subject to the Erlang Public License,
      Version 1.1, (the "License"); you may not use this file except in
      compliance with the License. You should have received a copy of the
      Erlang Public License along with this software. If not, it can be
      retrieved online at http://www.erlang.org/.

      Software distributed under the License is distributed on an "AS IS"
      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
      the License for the specific language governing rights and limitations
      under the License.

    </legalnotice>

    <title>asn1ct</title>
    <prepared>Kenneth Lundin</prepared>
    <responsible>Kenneth Lundin</responsible>
    <docno>1</docno>
    <approved>Kenneth Lundin</approved>
    <checked></checked>
    <date>97-10-14</date>
    <rev>A</rev>
    <file>asn1.sgml</file>
  </header>
  <module>asn1ct</module>
  <modulesummary>ASN.1 compiler and compile-time support functions</modulesummary>
  <description>
    <p>The ASN.1 compiler takes an ASN.1 module as input and generates a 
      corresponding Erlang module which can encode and decode the data-types
      specified. Alternatively the compiler takes a specification module 
      (se below) specifying all input modules and generates one module with 
      encode/decode functions. There are also some generic functions which
      can be used in during development of applications which handles ASN.1
      data (encoded as BER or PER).</p>
  </description>
  <funcs>
    <func>
      <name>compile(Asn1module) -> ok | {error,Reason}</name>
      <name>compile(Asn1module , Options) -> ok | {error,Reason}</name>
      <fsummary>Compile an ASN.1 module and generate encode/decode functions according to the encoding rules BER or PER.</fsummary>
      <type>
        <v>Asn1module = atom() | string()</v>
        <v>Options = [Option| OldOption]</v>
        <v>Option = ber_bin | per_bin | uper_bin | der | compact_bit_string | 
	noobj | {n2n,EnumTypeName} |{outdir,Dir} | {i,IncludeDir} | optimize | 
	driver | asn1config | undec_rest | {inline,OutputName} | inline |
	{macro_name_prefix, Prefix} | {record_name_prefix, Prefix} | verbose</v>
        <v>OldOption = ber | per</v> 
        <v>Reason = term()</v>
        <v>Prefix = string()</v>
      </type>
      <desc>
        <p>Compiles the ASN.1 module <c>Asn1module</c> and generates an 
          Erlang module <c>Asn1module.erl</c> with encode and decode 
          functions for the types defined in <c>Asn1module</c>. For each 
          ASN.1 value defined in the module an Erlang function which 
          returns the value in Erlang representation is generated.</p>
        <p>If <c>Asn1module</c> is a filename without extension first
          <c>".asn1"</c> is assumed, then <c>".asn"</c> and finally
          <c>".py"</c> (to be compatible with the old ASN.1 compiler).
          Of course <c>Asn1module</c> can be a full pathname (relative or
          absolute) including filename with (or without) extension.
                    <marker id="asn1set"></marker>
</p>
        <p>If one wishes to compile a set of Asn1 modules into one
          Erlang file with encode/decode functions one has to list all
          involved files in a configuration file. This configuration
          file must have a double extension ".set.asn", (".asn" can
          alternatively be ".asn1" or ".py"). The input files' names
          must be listed, within quotation marks (""), one at each row
          in the file. If the input files are <c>File1.asn</c>,
          <c>File2.asn</c> and <c>File3.asn</c> the configuration file
          shall look like:</p>
        <pre>
File1.asn
File2.asn
File3.asn        </pre>
        <p>The output files will in this case get their names from the
          configuration file. If the configuration file has the name
          <c>SetOfFiles.set.asn</c> the name of the output files will be
          <c>SetOfFiles.hrl, SetOfFiles.erl and SetOfFiles.asn1db</c>.</p>
        <p>Sometimes in a system of ASN.1 modules there are different
          default tag modes, e.g. AUTOMATIC, IMPLICIT or EXPLICIT. The
          multi file compilation resolves the default tagging as if
          the modules were compiled separately.</p>
        <p>Another unwanted effect that may occur in multi file compilation
          is name collisions. The compiler solves this problem in two
          ways: If the definitions are identical then the output module
          keeps only one definition with the original name. But if
          definitions only have same name and differs in the definition, 
          then they will be renamed. The new names will be the definition
          name and the original module name concatenated.</p>
        <p>If any name collision have occurred the compiler reports a 
          "NOTICE: ..." message that tells if a definition was renamed,
          and the new name that must be used to encode/decode data.</p>

        <p>
	  <c>Options</c> is a list with options specific for the asn1
	  compiler and options that are applied to the Erlang compiler.
	  The latter are those that not is recognized as asn1 specific.
	  For <em>preferred option use</em> see <seealso
	  marker="asn1_ug#preferred option use">Preferred Option Use
	  section in users guide</seealso>. Available options are:
	</p>
	<taglist>
          <tag><c>ber | ber_bin | per | per_bin | uper_bin</c></tag>
          <item>
            <p>
	      The encoding rule to be used. The supported encoding rules
	      are BER (Basic Encoding Rules), 
	      PER aligned (Packed Encoding Rules) and PER unaligned. 
	      If the encoding rule option is omitted <c>ber</c> 
	      is the default.
	      The <c>per_bin</c> option means the aligned
	      variant. To use the unaligned variant the <c>uper_bin</c>
	      option has to be used.
	    </p>
	    <p>
	      The generated Erlang module always gets the same name
	      as the ASN.1 module and as a consequence of this only one
	    encoding rule per ASN.1 module can be used at runtime.
	    </p>
	    <p>
	      The <c>ber_bin</c> and <c>per_bin</c> options are
	      equivalent with the <c>OldOptions</c> <c>ber</c> and <c>per</c>
	      with the difference that the generated encoding/decoding
	      functions take advantage of the bit syntax, which in most
	      cases increases the performance considerably. The result
	      from encoding is a binary or an iolist.
	    </p>
          </item>
          <tag><c>der</c></tag>
          <item>
            <p>
	      By this option the Distinguished Encoding Rules (DER) is chosen.
	      DER is regarded as a specialized variant of the BER encoding 
              rule, therefore the <c>der</c> option only makes sense together
	      with the <c>ber</c> or <c>ber_bin</c> option. 
	      This option
              sometimes adds sorting and value checks when encoding, which
              implies a slower encoding. The decoding routines are the same
              as for <c>ber</c>.
	    </p>
          </item>
          <tag><c>compact_bit_string</c></tag>
          <item>
            <p>
	      Makes it possible to use a compact notation for values
              of the BIT STRING type in Erlang. The notation: 
	    </p>
            <pre>
BitString = {Unused,Binary},
Unused = integer(),
Binary = binary()            
	    </pre>
            <p>
	      <c>Unused</c> must be a number in the range 0 to 7. It
	      tells how many bits in the least significant byte in
	      <c>Binary</c> that is unused. 
	      For details see 
	      <seealso marker="asn1_ug#BIT STRING">
		BIT STRING type section in users guide
		</seealso>.
	    </p>
	  </item>
          <tag><c>{n2n,EnumTypeName}</c></tag>
          <item>
            <p>
	      Tells the compiler to generate functions for conversion between
	      names (as atoms) and numbers and vice versa for the EnumTypeName specified. There can be multiple occurrences of this option in order to specify several type names. The type names must be declared as ENUMERATIONS in the ASN.1 spec.
	      If the EnumTypeName does not exist in the ASN.1 spec the 
	      compilation will stop with an error code.
	      The generated conversion functions are named 
	      <c>name2num_EnumTypeName/1</c> and 
	      <c>num2name_EnumTypeName/1</c>.
	    </p>
          </item>
          <tag><c>noobj</c></tag>
          <item>
            <p>Do not compile (i.e do not produce object code) the generated 
              <c>.erl</c> file. If this option is omitted the generated Erlang module
              will be compiled.</p>
          </item>
          <tag><c>{i,IncludeDir}</c></tag>
          <item>
            <p>Adds <c>IncludeDir</c> to the search-path for
              <c>.asn1db</c> and asn1 source files. The compiler tries
              to open a <c>.asn1db</c> file when a module imports
              definitions from another ASN.1 module. If no
              <c>.asn1db</c> file is found the asn1 source file is
              parsed.  Several <c>{i,IncludeDir}</c> can be given.
              </p>
          </item>
          <tag><c>{outdir,Dir}</c></tag>
          <item>
            <p>Specifies the directory <c>Dir</c> where all generated files 
              shall be placed. If omitted the files are placed in the 
              current directory.</p>
          </item>
          <tag><c>optimize</c></tag>
          <item>
            <p>This option is only valid together with one of the
              <c>per_bin</c> 
              or <c>ber_bin</c> option. It gives time optimized code 
              generated and it uses another runtime module and 
              in the <c>per_bin</c> case a linked-in driver. The result 
              in the <c>per_bin</c> case from an encode when compiled
              with this option will be a binary.</p>
          </item>
          <tag><c>driver</c></tag>
          <item>
            <p>Option valid together with <c>ber_bin</c> and <c>optimize</c>
              options. It enables the use of a linked-in driver that gives
              considerable faster decode. In <c>ber_bin</c> the driver is
              enabled only by explicit use of the option <c>driver</c>.</p>
          </item>
          <tag><c>asn1config</c></tag>
          <item>
            <p>When one of the specialized decodes, exclusive or
              selective decode, is wanted one has to give instructions in
              a configuration file. The option <c>asn1config</c> enables
              specialized decodes and takes the configuration file, which
              has the same name as the ASN.1 spec but with extension
              <c>.asn1config</c>, in concern.
              </p>
            <p>The instructions for exclusive decode must follow the
              <seealso marker="asn1_spec#Exclusive Instruction">instruction and grammar in the User's Guide</seealso>.
              </p>
            <p>You can also find the instructions for selective decode
              in the
              <seealso marker="asn1_spec#Selective Instruction">User's Guide</seealso>.
              </p>
          </item>
          <tag><c>undec_rest</c></tag>
          <item>
            <p>A buffer that holds a message, being decoded may
              also have some following bytes. Now it is possible to get
              those following bytes returned together with the decoded
              value. If an asn1 spec is compiled with this option a tuple
              <c>{ok,Value,Rest}</c> is returned. <c>Rest</c> may be a
              list or a binary. Earlier versions of the compiler ignored
              those following bytes.</p>
          </item>
          <tag><c>{inline,OutputName}</c></tag>
          <item>
            <p>Compiling with this option gives one output module
              containing all asn1 run-time functionality. The asn1 specs
              are provided in a target module Module.set.asn as described
              <seealso marker="#asn1set">above</seealso>. The name of the
              resulting module containing generated encode/decode functions
              and in-lined run-time functions will be
              <c>OutputName.erl</c>. The merging/in-lining of code is done
              by the <c>igor</c> module of <c>syntax_tools</c>. By default
              the functions generated from the first asn1 spec in the
              <c>.set.asn</c> are exported, unless a
              <c>{export,[atom()]}</c> or <c>{export_all,true}</c> option
              are provided. The list of atoms are names of chosen asn1
              specs from the <c>.set.asn</c> file.</p>
          </item>
          <tag><c>inline</c></tag>
          <item>
            <p>It is also possible to use the sole argument <c>inline</c>.
              It is as <c>{inline,OutputName}</c>, but the output file gets the
              default name of the source <c>.set.asn</c> file.</p>
          </item>
          <tag><c>{macro_name_prefix, Prefix}</c></tag>
          <item>
              <p>All macro names generated by the compiler are prefixed with
              <c>Prefix</c>. This is useful when multiple protocols that contains
              macros with identical names are included in a single module.</p>
          </item>
          <tag><c>{record_name_prefix, Prefix}</c></tag>
          <item>
            <p>All record names generated by the compiler are prefixed with
              <c>Prefix</c>. This is useful when multiple protocols that contains
              records with identical names are included in a single module.</p>
          </item>
          <tag><c>verbose</c></tag>
          <item>
            <p>Causes more verbose information from the compiler
              describing what it is doing.</p>
          </item>
        </taglist>
        <p>Any additional option that is applied will be passed to
          the final step when the generated .erl file is compiled.
          </p>
        <p>The compiler generates the following files:</p>
        <list type="bulleted">
          <item>
            <p><c>Asn1module.hrl</c> (if any SET or SEQUENCE is defined)</p>
          </item>
          <item>
            <p><c>Asn1module.erl</c> the Erlang module with encode, decode and value functions.</p>
          </item>
          <item>
            <p><c>Asn1module.asn1db</c> intermediate format used by the compiler when modules IMPORTS
              definitions from each other.</p>
          </item>
        </list>
      </desc>
    </func>
    <func>
      <name>encode(Module,Type,Value)-> {ok,Bytes} | {error,Reason}</name>
      <fsummary>Encode an ASN.1 value.</fsummary>
      <type>
        <v>Module = Type = atom()</v>
        <v>Value = term()</v>
        <v>Bytes = [Int] when integer(Int), Int >= 0, Int =&lt; 255</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Encodes <c>Value</c> of <c>Type</c> defined in the ASN.1 module 
          <c>Module</c>. Returns a list of bytes if successful. To get as fast execution as 
          possible the 
          encode function only performs rudimentary tests that the input 
          <c>Value</c>
          is a correct instance of <c>Type</c>. The length of strings is for example
          not always checked. Returns <c>{ok,Bytes}</c> if successful or 
          <c>{error,Reason}</c> if an error occurred.
          </p>
      </desc>
    </func>
    <func>
      <name>decode(Module,Type,Bytes) -> {ok,Value}|{error,Reason}</name>
      <fsummary>Decode from Bytes into an ASN.1 value.</fsummary>
      <type>
        <v>Module = Type = atom()</v>
        <v>Value = Reason = term()</v>
        <v>Bytes = [Int] when integer(Int), Int >= 0, Int =&lt; 255</v>
      </type>
      <desc>
        <p>Decodes <c>Type</c> from <c>Module</c> from the list of bytes 
          <c>Bytes</c>. Returns <c>{ok,Value}</c> if successful.</p>
      </desc>
    </func>
    <func>
      <name>validate(Module,Type,Value) ->  ok | {error,Reason}</name>
      <fsummary>Validate an ASN.1 value.</fsummary>
      <type>
        <v>Module = Type = atom()</v>
        <v>Value = term()</v>
      </type>
      <desc>
        <p>Validates that <c>Value</c> conforms  to <c>Type</c> 
          from <c>Module</c>. <em>Not implemented in this version of the ASN.1 application.</em></p>
      </desc>
    </func>
    <func>
      <name>value(Module ,Type) -> {ok,Value} | {error,Reason}</name>
      <fsummary>Create an ASN.1 value for test purposes.</fsummary>
      <type>
        <v>Module = Type = atom()</v>
        <v>Value = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Returns an Erlang term which is an example of a valid Erlang 
          representation of a value of the ASN.1 type <c>Type</c>. The value
          is a random value and subsequent calls to this function will for most
          types return different values.</p>
      </desc>
    </func>
    <func>
      <name>test(Module) -> ok | {error,Reason}</name>
      <name>test(Module,Type) -> ok | {error,Reason}</name>
      <name>test(Module,Type,Value) -> ok | {error,Reason}</name>
      <fsummary>Perform a test of encode and decode for types in an  ASN.1 module.</fsummary>
      <desc>
        <p>Performs a test of encode and decode of all types in <c>Module</c>. 
          The generated functions are called by this function.
          This function is useful during test to secure that the generated
          encode and decode functions and the general runtime support work 
          as expected.          <br></br>
<c>test/1</c> iterates over all types in <c>Module</c>.          <br></br>
<c>test/2</c> tests type <c>Type</c> with a random value.          <br></br>
<c><![CDATA[test/3 tests type <c>Type]]></c> with <c>Value</c>.          <br></br>

          Schematically the following happens for each type in the module.</p>
        <p></p>
        <code type="none">
{ok,Value} = asn1ct:value(Module,Type),
{ok,Bytes} = asn1ct:encode(Module,Type,Value),
{ok,Value} = asn1ct:decode(Module,Type,Bytes).         </code>
      </desc>
    </func>
  </funcs>
  
</erlref>