path: root/lib/common_test/doc/src/ct.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>2010</year><year>2012</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.

    </legalnotice>

    <title>ct</title>
    <prepared></prepared>
    <responsible></responsible>
    <docno></docno>
    <approved></approved>
    <checked></checked>
    <date></date>
    <rev>A</rev>
    <file>ct.xml</file>
  </header>
  <module>ct</module>
  <modulesummary>Main user interface for the Common Test framework.</modulesummary>

  <description>

     <p>Main user interface for the <c>Common Test</c> framework.</p>

     <p>This module implements the command-line interface for running
       tests and basic functions for <c>Common Test</c> case issues, such as
       configuration and logging.</p>

     <p><em>Test Suite Support Macros</em></p> 

     <p>The <c>config</c> macro is defined in <c>ct.hrl</c>. This macro is
       to be used to retrieve information from the <c>Config</c> variable sent
       to all test cases. It is used with two arguments; the first is the name
       of the configuration variable to retrieve, the second is the
       <c>Config</c> variable supplied to the test case.</p>

    <p>Possible configuration variables include:</p>

    <list type="bulleted">
      <item><p><c>data_dir</c> - Data file directory</p></item>
      <item><p><c>priv_dir</c> - Scratch file directory</p></item>
      <item><p>Whatever added by
      <seealso marker="common_test#Module:init_per_suite-1"><c>init_per_suite/1</c></seealso>
      or
      <seealso marker="common_test#Module:init_per_testcase-2"><c>init_per_testcase/2</c></seealso>
      in the test suite.</p></item>
    </list>

  </description>

  <section>
    <title>Data Types</title>
    <marker id="types"/>
    <taglist>

      <tag><c>handle() = pid()</c></tag>
        <item><marker id="type-handle"/>
          <p>The identity (handle) of a connection.</p></item>

      <tag><c>target_name() = atom()</c></tag>
        <item><marker id="type-target_name"/>
          <p>A name and association to configuration data introduced
            through a require statement, or a call to
            <seealso marker="#require-2"><c>ct:require/2</c></seealso>,
            for example,
            <c>ct:require(mynodename,{node,[telnet]})</c>.</p></item>

    </taglist>
  </section>

  <funcs>
    <func>
      <name>abort_current_testcase(Reason) -&gt; ok | {error, ErrorReason}</name>
      <fsummary>Aborts the currently executing test case.</fsummary>
      <type>
        <v>Reason = term()</v>
        <v>ErrorReason = no_testcase_running | parallel_group</v>
      </type>
      <desc><marker id="abort_current_testcase-1"/>
        <p>Aborts the currently executing test case. The user must know with
          certainty which test case is currently executing. The function is
          therefore only safe to call from a function that has been called
          (or synchronously invoked) by the test case.</p>

        <p><c>Reason</c>, the reason for aborting the test case, is printed
          in the test case log.</p>
      </desc>
    </func>

    <func>
      <name>add_config(Callback, Config) -&gt; ok | {error, Reason}</name>
      <fsummary>Loads configuration variables using the specified callback
        module and configuration string.</fsummary>
      <type>
        <v>Callback = atom()</v>
        <v>Config = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="add_config-2"/>
        <p>Loads configuration variables using the specified callback module and
          configuration string. The callback module is to be either loaded or
          present in the code part. Loaded configuration variables can later
          be removed using function
          <seealso marker="#remove_config-2"><c>ct:remove_config/2</c></seealso>.
        </p>
      </desc>
    </func>

    <func>
      <name>break(Comment) -&gt; ok | {error, Reason}</name>
      <fsummary>Cancels any active timetrap and pause the execution of the
        current test case until the user calls function continue/0.</fsummary>
      <type>
        <v>Comment = string()</v>
        <v>Reason = {multiple_cases_running, TestCases} | 'enable break with release_shell option'</v>
        <v>TestCases = [atom()]</v>
      </type>
      <desc><marker id="break-1"/>
        <p>Cancels any active timetrap and pauses the execution of the
          current test case until the user calls function <c>continue/0</c>.
          The user can then interact with the Erlang node running the tests,
          for example, for debugging purposes or for manually executing a
          part of the test case. If a parallel group is executing,
          <seealso marker="#break-2"><c>ct:break/2</c></seealso> is to be
          called instead.</p>
       <p>A cancelled timetrap is not automatically reactivated after the
         break, but must be started exlicitly with
         <seealso marker="#timetrap-1"><c>ct:timetrap/1</c></seealso>.</p>
       <p>In order for the break/continue functionality to work, <c>Common
         Test</c> must release the shell process controlling <c>stdin</c>.
         This is done by setting start option <c>release_shell</c>
         to <c>true</c>. For details, see section
         <seealso marker="run_test_chapter#erlang_shell_or_program">Running
         Tests from the Erlang Shell or from an Erlang Program</seealso>
         in the User's Guide.</p>
      </desc>
    </func>

    <func>
      <name>break(TestCase, Comment) -&gt; ok | {error, Reason}</name>
      <fsummary>Works the same way as break/1, only argument TestCase makes it
        possible to pause a test case executing in a parallel group.</fsummary>
      <type>
        <v>TestCase = atom()</v>
        <v>Comment = string()</v>
        <v>Reason = 'test case not running' | 'enable break with release_shell option'</v>
      </type>
      <desc><marker id="break-2"/>
        <p>Works the same way as
          <seealso marker="#break-1"><c>ct:break/1</c></seealso>, only
          argument <c>TestCase</c> makes it possible to pause a test case
          executing in a parallel group. Function
          <seealso marker="#continue-1"><c>ct:continue/1</c></seealso> is to
          be used to resume execution of <c>TestCase</c>.</p>

        <p>For details, see
          <seealso marker="#break/1"><c>ct:break/1</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>capture_get() -&gt; ListOfStrings</name>
      <fsummary>Equivalent to capture_get([default]).</fsummary>
      <type>
        <v>ListOfStrings = [string()]</v>
      </type>
      <desc><marker id="capture_get-0"/>
        <p>Equivalent to
          <seealso marker="#capture_get-1">ct:capture_get([default])</seealso>.</p>
      </desc>
    </func>

    <func>
      <name>capture_get(ExclCategories) -&gt; ListOfStrings</name>
      <fsummary>Returns and purges the list of text strings buffered during
        the latest session of capturing printouts to stdout.</fsummary>
      <type>
        <v>ExclCategories = [atom()]</v>
        <v>ListOfStrings = [string()]</v>
      </type>
      <desc><marker id="capture_get-1"/>
        <p>Returns and purges the list of text strings buffered during the
          latest session of capturing printouts to <c>stdout</c>. Log
          categories that are to be ignored in <c>ListOfStrings</c> can be
          specified with <c>ExclCategories</c>.
          If <c>ExclCategories = []</c>, no filtering takes place.</p>

        <p>See also
          <seealso marker="#capture_start-0"><c>ct:capture_start/0</c></seealso>,
          <seealso marker="#capture_stop-0"><c>ct:capture_stop/0</c></seealso>,
          <seealso marker="#log-3"><c>ct:log/3</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>capture_start() -&gt; ok</name>
      <fsummary>Starts capturing all text strings printed to stdout
        during execution of the test case.</fsummary>
        <desc><marker id="capture_start-0"/>
        <p>Starts capturing all text strings printed to <c>stdout</c>
          during execution of the test case.</p>

        <p>See also
          <seealso marker="#capture_get-1"><c>ct:capture_get/1</c></seealso>,
          <seealso marker="#capture_stop-0"><c>ct:capture_stop/0</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>capture_stop() -&gt; ok</name>
      <fsummary>Stops capturing text strings (a session started with
        capture_start/0).</fsummary>
      <desc><marker id="capture_stop-0"/>
        <p>Stops capturing text strings (a session started with
          <c>capture_start/0</c>).</p>

        <p>See also
          <seealso marker="#capture_get-1"><c>ct:capture_get/1</c></seealso>,
          <seealso marker="#capture_start-0"><c>ct:capture_start/0</c></seealso>.</p>
       </desc>
    </func>

    <func>
      <name>comment(Comment) -&gt; ok</name>
      <fsummary>Prints the specified Comment in the comment field in the
        table on the test suite result page.</fsummary>
      <type>
        <v>Comment = term()</v>
      </type>
      <desc><marker id="comment-1"/>
        <p>Prints the specified <c>Comment</c> in the comment field in the
          table on the test suite result page.</p>

        <p>If called several times, only the last comment is printed. The
          test case return value <c>{comment,Comment}</c> overwrites the
          string set by this function.</p>
      </desc>
    </func>

    <func>
      <name>comment(Format, Args) -&gt; ok</name>
      <fsummary>Prints the formatted string in the comment field in the
        table on the test suite result page.</fsummary>
      <type>
        <v>Format = string()</v>
        <v>Args = list()</v>
      </type>
      <desc><marker id="comment-2"/>
        <p>Prints the formatted string in the comment field in the table
          on the test suite result page.</p>

        <p>Arguments <c>Format</c> and <c>Args</c> are used in a call to
          <c>io_lib:format/2</c> to create the comment string. The behavior
          of <c>comment/2</c> is otherwise the same as function
          <seealso marker="#comment-1"><c>ct:comment/1</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>continue() -&gt; ok</name>
      <fsummary>This function must be called to continue after a test
        case (not executing in a parallel group) has called break/1.</fsummary>
      <desc><marker id="continue-0"/>
        <p>This function must be called to continue after a test case
          (not executing in a parallel group) has called function
          <seealso marker="#break-1"><c>ct:break/1</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>continue(TestCase) -&gt; ok</name>
      <fsummary>This function must be called to continue after a test case
        has called break/2.</fsummary>
      <type>
        <v>TestCase = atom()</v>
      </type>
      <desc><marker id="continue-1"/>
        <p>This function must be called to continue after a test case has
          called <seealso marker="#break-2"><c>ct:break/2</c></seealso>.
          If the paused test case, <c>TestCase</c>, executes in a parallel
          group, this function, rather than <c>continue/0</c>, must be used
          to let the test case proceed.</p>
      </desc>
    </func>

    <func>
      <name>decrypt_config_file(EncryptFileName, TargetFileName) -&gt; ok | {error, Reason}</name>
      <fsummary>Decrypts EncryptFileName, previously generated with
        encrypt_config_file/2,3.</fsummary>
      <type>
        <v>EncryptFileName = string()</v>
        <v>TargetFileName = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="decrypt_config_file-2"/>
        <p>Decrypts <c>EncryptFileName</c>, previously generated with
          <seealso marker="#encrypt_config_file-2"><c>ct:encrypt_config_file/2,3</c></seealso>.
          The original file contents is saved in the target file. The
          encryption key, a string, must be available in a text file named
          <c>.ct_config.crypt</c>, either in the current directory, or the
          home directory of the user (it is searched for in that order).</p>
      </desc>
    </func>

    <func>
      <name>decrypt_config_file(EncryptFileName, TargetFileName, KeyOrFile) -&gt; ok | {error, Reason}</name>
      <fsummary>Decrypts EncryptFileName, previously generated with
        encrypt_config_file/2,3.</fsummary>
      <type>
        <v>EncryptFileName = string()</v>
        <v>TargetFileName = string()</v>
        <v>KeyOrFile = {key, string()} | {file, string()}</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="decrypt_config_file-3"/>
        <p>Decrypts <c>EncryptFileName</c>, previously generated with
          <seealso marker="#encrypt_config_file-2"><c>ct:encrypt_config_file/2,3</c></seealso>.
          The original file contents is saved in the target file. The key
          must have the same value as that used for encryption.</p>
      </desc>
    </func>

    <func>
      <name>encrypt_config_file(SrcFileName, EncryptFileName) -&gt; ok | {error, Reason}</name>
      <fsummary>Encrypts the source configuration file with DES3 and saves the
        result in file EncryptFileName.</fsummary>
      <type>
        <v>SrcFileName = string()</v>
        <v>EncryptFileName = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="encrypt_config_file-2"/>
        <p>Encrypts the source configuration file with DES3 and saves the result
          in file <c>EncryptFileName</c>. The key, a string, must be
          available in a text file named <c>.ct_config.crypt</c>, either
          in the current directory, or the home directory of the user (it
          is searched for in that order).</p>

        <p>For information about using encrypted configuration files when
          running tests, see section
          <seealso marker="config_file_chapter#encrypted_config_files">Encrypted
          Configuration Files</seealso> in the User's Guide.</p>

        <p>For details on DES3 encryption/decryption, see application
          <seealso marker="crypto:index"><c>Crypto</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>encrypt_config_file(SrcFileName, EncryptFileName, KeyOrFile) -&gt; ok | {error, Reason}</name>
      <fsummary>Encrypts the source configuration file with DES3 and saves the
       result in the target file EncryptFileName.</fsummary>
      <type>
        <v>SrcFileName = string()</v>
        <v>EncryptFileName = string()</v>
        <v>KeyOrFile = {key, string()} | {file, string()}</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="encrypt_config_file-3"/>
        <p>Encrypts the source configuration file with DES3 and saves the result
          in the target file <c>EncryptFileName</c>. The encryption key
          to use is either the value in <c>{key,Key}</c> or the value
          stored in the file specified by <c>{file,File}</c>.</p>

        <p>For information about using encrypted configuration files when
          running tests, see section
          <seealso marker="config_file_chapter#encrypted_config_files">Encrypted
          Configuration Files</seealso> in the User's Guide.</p>

        <p>For details on DES3 encryption/decryption, see application
          <seealso marker="crypto:index"><c>Crypto</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>fail(Reason) -&gt; ok</name>
      <fsummary>Terminates a test case with the specified error
        Reason.</fsummary>
      <type>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="fail-1"/>
        <p>Terminates a test case with the specified error <c>Reason</c>.</p>
      </desc>
    </func>

    <func>
      <name>fail(Format, Args) -&gt; ok</name>
      <fsummary>Terminates a test case with an error message specified by
        a format string and a list of values (used as arguments to
        io_lib:format/2).</fsummary>
        <type>
          <v>Format = string()</v>
          <v>Args = list()</v>
       </type>
      <desc><marker id="fail-2"/>
        <p>Terminates a test case with an error message specified by a
          format string and a list of values (used as arguments to
          <c>io_lib:format/2</c>).</p>
      </desc>
    </func>

    <func>
      <name>get_config(Required) -&gt; Value</name>
      <fsummary>Equivalent to get_config(Required, undefined, []).</fsummary>
      <desc><marker id="get_config-1"/>
        <p>Equivalent to <seealso marker="#get_config-3"><c>ct:get_config(Required,
          undefined, [])</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>get_config(Required, Default) -&gt; Value</name>
      <fsummary>Equivalent to get_config(Required, Default, []).</fsummary>
      <desc><marker id="get_config-2"/>
        <p>Equivalent to <seealso marker="#get_config-3"><c>ct:get_config(Required,
          Default, [])</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>get_config(Required, Default, Opts) -&gt; ValueOrElement</name>
      <fsummary>Reads configuration data values.</fsummary>
      <type>
        <v>Required = KeyOrName | {KeyOrName, SubKey} | {KeyOrName, SubKey, SubKey}</v>
        <v>KeyOrName = atom()</v>
        <v>SubKey = atom()</v>
        <v>Default = term()</v>
        <v>Opts = [Opt] | []</v>
        <v>Opt = element | all</v>
        <v>ValueOrElement = term() | Default</v>
      </type>
      <desc><marker id="get_config-3"/>
        <p>Reads configuration data values.</p>

        <p>Returns the matching values or configuration elements, given a
          configuration variable key or its associated name (if one has been
          specified with
          <seealso marker="#require-2"><c>ct:require/2</c></seealso>
          or a <c>require</c> statement).</p>

        <p><em>Example:</em></p>

        <p>Given the following configuration file:</p>

        <pre>
 {unix,[{telnet,IpAddr},
        {user,[{username,Username},
               {password,Password}]}]}.</pre>

        <p>Then:</p>

        <pre>
 ct:get_config(unix,Default) -&gt; [{telnet,IpAddr}, 
  {user, [{username,Username}, {password,Password}]}]
 ct:get_config({unix,telnet},Default) -&gt; IpAddr
 ct:get_config({unix,user,username},Default) -&gt; Username
 ct:get_config({unix,ftp},Default) -&gt; Default
 ct:get_config(unknownkey,Default) -&gt; Default</pre>

        <p>If a configuration variable key has been associated with a name (by
          <seealso marker="#require-2"><c>ct:require/2</c></seealso>
          or a <c>require</c> statement), the name can be used instead
          of the key to read the value:</p>

        <pre>
 ct:require(myuser,{unix,user}) -&gt; ok.
 ct:get_config(myuser,Default) -&gt; [{username,Username}, {password,Password}]</pre>
  
        <p>If a configuration variable is defined in multiple files, use option
         <c>all</c> to access all possible values. The values are returned
          in a list. The order of the elements corresponds to the order
          that the configuration files were specified at startup.</p>

        <p>If configuration elements (key-value tuples) are to be returned as
          result instead of values, use option <c>element</c>. The
          returned elements are then on the form <c>{Required,Value}</c>.</p>

        <p>See also
          <seealso marker="#get_config-1"><c>ct:get_config/1</c></seealso>,
          <seealso marker="#get_config-2"><c>ct:get_config/2</c></seealso>,
          <seealso marker="#require-1"><c>ct:require/1</c></seealso>,
          <seealso marker="#require-2"><c>ct:require/2</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>get_event_mgr_ref() -&gt; EvMgrRef</name>
      <fsummary>Gets a reference to the <c>Common Test</c> event manager.</fsummary>
        <type>
          <v>EvMgrRef = atom()</v>
        </type>
        <desc><marker id="get_event_mgr_ref-0"/>
          <p>Gets a reference to the <c>Common Test</c> event manager.
            The reference can be used to, for example, add a user-specific
            event handler while tests are running.</p>

          <p><em>Example:</em></p>

          <pre>
 gen_event:add_handler(ct:get_event_mgr_ref(), my_ev_h, [])</pre>
      </desc>
    </func>

    <func>
      <name>get_status() -&gt; TestStatus | {error, Reason} | no_tests_running</name>
      <fsummary>Returns status of ongoing test.</fsummary>
      <type>
        <v>TestStatus = [StatusElem]</v>
        <v>StatusElem = {current, TestCaseInfo} | {successful, Successful} | {failed, Failed} | {skipped, Skipped} | {total, Total}</v>
        <v>TestCaseInfo = {Suite, TestCase} | [{Suite, TestCase}]</v>
        <v>Suite = atom()</v>
        <v>TestCase = atom()</v>
        <v>Successful = integer()</v>
        <v>Failed = integer()</v>
        <v>Skipped = {UserSkipped, AutoSkipped}</v>
        <v>UserSkipped = integer()</v>
        <v>AutoSkipped = integer()</v>
        <v>Total = integer()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="get_status-0"/>
        <p>Returns status of ongoing test. The returned list contains
          information about which test case is executing (a list of cases
          when a parallel test case group is executing), as well as
          counters for successful, failed, skipped, and total test cases
          so far.</p>
      </desc>
    </func>

    <func>
      <name>get_target_name(Handle) -&gt; {ok, TargetName} | {error, Reason}</name>
      <fsummary>Returns the name of the target that the specified connection
        belongs to.</fsummary>
      <type>
        <v>Handle = handle()</v>
        <v>TargetName = target_name()</v>
      </type>
      <desc><marker id="get_target_name-1"/>
        <p>Returns the name of the target that the specified connection
          belongs to.</p>
      </desc>
    </func>

    <func>
      <name>get_testspec_terms() -&gt; TestSpecTerms | undefined</name>
      <fsummary>Gets a list of all test specification terms used to
        configure and run this test.</fsummary>
      <type>
        <v>TestSpecTerms = [{Tag, Value}]</v>
        <v>Value = [term()]</v>
      </type>
      <desc><marker id="get_testspec_terms-0"/>
        <p>Gets a list of all test specification terms used to configure
          and run this test.</p>
      </desc>
    </func>

    <func>
      <name>get_testspec_terms(Tags) -&gt; TestSpecTerms | undefined</name>
      <fsummary>Reads one or more terms from the test specification used to
        configure and run this test.</fsummary>
      <type>
        <v>Tags = [Tag] | Tag</v>
        <v>Tag = atom()</v>
        <v>TestSpecTerms = [{Tag, Value}] | {Tag, Value}</v>
        <v>Value = [{Node, term()}] | [term()]</v>
        <v>Node = atom()</v>
      </type>
      <desc><marker id="get_testspec_terms-1"/>
        <p>Reads one or more terms from the test specification used to
          configure and run this test. <c>Tag</c> is any valid test
          specification tag, for example, <c>label</c>, <c>config</c>, or
          <c>logdir</c>. User-specific terms are also available to read if
          option <c>allow_user_terms</c> is set.</p>
        <p>All value tuples returned, except user terms, have the node
          name as first element.</p>
        <p>To read test terms, use <c>Tag = tests</c> (rather than
          <c>suites</c>, <c>groups</c>, or <c>cases</c>). <c>Value</c> is
          then the list of <em>all</em> tests on the form
          <c>[{Node,Dir,[{TestSpec,GroupsAndCases1},...]},...]</c>, where
          <c>GroupsAndCases = [{Group,[Case]}] | [Case]</c>.</p>
      </desc>
    </func>

    <func>
      <name>get_timetrap_info() -&gt; {Time, {Scaling,ScaleVal}}</name>
      <fsummary>Reads information about the timetrap set for the current
        test case.</fsummary>
      <type>
        <v>Time = integer() | infinity</v>
        <v>Scaling = true | false</v>
        <v>ScaleVal = integer()</v>
      </type>
     <desc><marker id="get_timetrap_info-0"/>
        <p>Reads information about the timetrap set for the current test
          case. <c>Scaling</c> indicates if <c>Common Test</c> will attempt
          to compensate timetraps automatically for runtime delays
          introduced by, for example, tools like cover. <c>ScaleVal</c> is
	  the value of the current scaling multipler (always 1 if scaling is
	  disabled). Note the <c>Time</c> is not the scaled result.</p>
      </desc>
    </func>

    <func>
      <name>install(Opts) -&gt; ok | {error, Reason}</name>
      <fsummary>Installs configuration files and event handlers.</fsummary>
      <type>
        <v>Opts = [Opt]</v>
        <v>Opt = {config, ConfigFiles} | {event_handler, Modules} | {decrypt, KeyOrFile}</v>
        <v>ConfigFiles = [ConfigFile]</v>
        <v>ConfigFile = string()</v>
        <v>Modules = [atom()]</v>
        <v>KeyOrFile = {key, Key} | {file, KeyFile}</v>
        <v>Key = string()</v>
        <v>KeyFile = string()</v>
      </type>
      <desc><marker id="install-1"/>
        <p>Installs configuration files and event handlers.</p>

        <p>Run this function once before the first test.</p>

        <p><em>Example:</em></p>

        <pre>
 install([{config,["config_node.ctc","config_user.ctc"]}])</pre>

        <p>This function is automatically run by program <c>ct_run</c>.</p>
      </desc>
    </func>

    <func>
      <name>listenv(Telnet) -&gt; [Env]</name>
      <fsummary>Performs command listenv on the specified Telnet connection
        and returns the result as a list of key-value pairs.</fsummary>
      <type>
        <v>Telnet = term()</v>
        <v>Env = {Key, Value}</v>
        <v>Key = string()</v>
        <v>Value = string()</v>
      </type>
      <desc><marker id="listenv-1"/>
        <p>Performs command <c>listenv</c> on the specified Telnet connection
          and returns the result as a list of key-value pairs.</p>
      </desc>
    </func>

    <func>
      <name>log(Format) -&gt; ok</name>
      <fsummary>Equivalent to log(default, 50, Format, [], []).</fsummary>
      <desc><marker id="log-1"/>
        <p>Equivalent to
          <seealso marker="#log-5"><c>ct:log(default, 50, Format, [], [])</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>log(X1, X2) -&gt; ok</name>
      <fsummary>Equivalent to log(Category, Importance, Format,
        FormatArgs, []).</fsummary>
      <type>
        <v>X1 = Category | Importance | Format</v>
        <v>X2 = Format | FormatArgs</v>
      </type>
      <desc><marker id="log-2"/>
        <p>Equivalent to <seealso marker="#log-5"><c>ct:log(Category,
          Importance, Format, FormatArgs, [])</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>log(X1, X2, X3) -&gt; ok</name>
      <fsummary>Equivalent to log(Category, Importance, Format,
        FormatArgs, Opts).</fsummary>
      <type>
        <v>X1 = Category | Importance</v>
        <v>X2 = Importance | Format</v>
        <v>X3 = Format | FormatArgs | Opts</v>
      </type>
      <desc><marker id="log-3"/>
        <p>Equivalent to <seealso marker="#log-5"><c>ct:log(Category,
          Importance, Format, FormatArgs, Opts)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>log(X1, X2, X3, X4) -&gt; ok</name>
      <fsummary>Equivalent to log(Category, Importance, Format,
        FormatArgs, Opts).</fsummary>
      <type>
        <v>X1 = Category | Importance</v>
        <v>X2 = Importance | Format</v>
        <v>X3 = Format | FormatArgs</v>
	<v>X4 = FormatArgs | Opts</v>
      </type>
      <desc><marker id="log-4"/>
        <p>Equivalent to <seealso marker="#log-5"><c>ct:log(Category,
          Importance, Format, FormatArgs, Opts)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>log(Category, Importance, Format, FormatArgs, Opts) -&gt; ok</name>
      <fsummary>Prints from a test case to the log file.</fsummary>
      <type>
        <v>Category = atom()</v>
        <v>Importance = integer()</v>
        <v>Format = string()</v>
        <v>FormatArgs = list()</v>
        <v>Opts = [Opt]</v>
	<v>Opt = no_css | esc_chars</v>
      </type>
      <desc><marker id="log-5"/>
        <p>Prints from a test case to the log file.</p>

        <p>This function is meant for printing a string directly from a
          test case to the test case log file.</p>

        <p>Default <c>Category</c> is <c>default</c>,
          default <c>Importance</c> is <c>?STD_IMPORTANCE</c>,
          and default value for <c>FormatArgs</c> is <c>[]</c>.</p>

        <p>For details on <c>Category</c>, <c>Importance</c> and the <c>no_css</c>
	option, see section <seealso marker="write_test_chapter#logging">
	Logging - Categories and Verbosity Levels</seealso> in the User's Guide.</p>

	<p>Common Test will not escape special HTML characters (&lt;, &gt; and &amp;)
	   in the text printed with this function, unless the <c>esc_chars</c>
	   option is used.</p>
      </desc>
    </func>

    <func>
      <name>make_priv_dir() -&gt; ok | {error, Reason}</name>
      <fsummary>If the test has been started with option create_priv_dir
        set to manual_per_tc, in order for the test case to use the private
        directory, it must first create it by calling this function.</fsummary>
      <type>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="make_priv_dir-0"/>
        <p>If the test is started with option <c>create_priv_dir</c>
          set to <c>manual_per_tc</c>, in order for the test case to use
          the private directory, it must first create it by calling this
          function.</p>
      </desc>
    </func>

    <func>
      <name>notify(Name, Data) -&gt; ok</name>
      <fsummary>Sends an asynchronous notification of type Name with Data
        to the <c>Common Test</c> event manager.</fsummary>
      <type>
        <v>Name = atom()</v>
        <v>Data = term()</v>
      </type>
      <desc><marker id="notify-2"/>
        <p>Sends an asynchronous notification of type <c>Name</c> with
          <c>Data</c>to the Common Test event manager. This can later be
          caught by any installed event manager.</p>

        <p>See also
          <seealso marker="stdlib:gen_event"><c>stdlib:gen_event(3)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>pal(Format) -&gt; ok</name>
      <fsummary>Equivalent to pal(default, 50, Format, []).</fsummary>
      <desc><marker id="pal-1"/>
        <p>Equivalent to
          <seealso marker="#pal-4"><c>ct:pal(default, 50, Format,
            [])</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>pal(X1, X2) -&gt; ok</name>
      <fsummary>Equivalent to pal(Category, Importance, Format,
        FormatArgs).</fsummary>
      <type>
        <v>X1 = Category | Importance | Format</v>
        <v>X2 = Format | FormatArgs</v>
      </type>
      <desc><marker id="pal-2"/>
        <p>Equivalent to <seealso marker="#pal-4"><c>ct:pal(Category,
          Importance, Format, FormatArgs)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>pal(X1, X2, X3) -&gt; ok</name>
      <fsummary>Equivalent to pal(Category, Importance, Format,
        FormatArgs).</fsummary>
      <type>
        <v>X1 = Category | Importance</v>
        <v>X2 = Importance | Format</v>
        <v>X3 = Format | FormatArgs</v>
      </type>
      <desc><marker id="pal-3"/>
        <p>Equivalent to <seealso marker="#pal-4"><c>ct:pal(Category,
          Importance, Format, FormatArgs)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>pal(Category, Importance, Format, FormatArgs) -&gt; ok</name>
      <fsummary>Prints and logs from a test case.</fsummary>
      <type>
        <v>Category = atom()</v>
        <v>Importance = integer()</v>
        <v>Format = string()</v>
        <v>FormatArgs = list()</v>
      </type>
      <desc><marker id="pal-4"/>
        <p>Prints and logs from a test case.</p>

        <p>This function is meant for printing a string from a test case,
          both to the test case log file and to the console.</p>

        <p>Default <c>Category</c> is <c>default</c>,
          default <c>Importance</c> is <c>?STD_IMPORTANCE</c>,
          and default value for <c>FormatArgs</c> is <c>[]</c>.</p>

        <p>For details on <c>Category</c> and <c>Importance</c>, see section
          <seealso marker="write_test_chapter#logging">Logging - Categories
          and Verbosity Levels</seealso> in the User's Guide.</p>

	<p>Note that special characters in the text (&lt;, &gt; and &amp;) will
	   be escaped by Common Test before the text is printed to the log
	   file.</p>
      </desc>
    </func>

    <func>
      <name>parse_table(Data) -&gt; {Heading, Table}</name>
      <fsummary>Parses the printout from an SQL table and returns a list of
        tuples.</fsummary>
      <type>
        <v>Data = [string()]</v>
        <v>Heading = tuple()</v>
        <v>Table = [tuple()]</v>
      </type>
      <desc><marker id="parse_table-1"/>
        <p>Parses the printout from an SQL table and returns a list of
          tuples.</p>

        <p>The printout to parse is typically the result of a <c>select</c>
          command in SQL. The returned <c>Table</c> is a list of tuples,
          where each tuple is a row in the table.</p>

        <p><c>Heading</c> is a tuple of strings representing the headings
          of each column in the table.</p>
      </desc>
    </func>

    <func>
      <name>print(Format) -&gt; ok</name>
      <fsummary>Equivalent to print(default, 50, Format, []).</fsummary>
      <desc><marker id="print-1"/>
        <p>Equivalent to <seealso marker="#print-4"><c>ct:print(default,
        50, Format, [])</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>print(X1, X2) -&gt; ok</name>
      <fsummary>Equivalent to print(Category, Importance, Format,
        FormatArgs).</fsummary>
      <type>
        <v>X1 = Category | Importance | Format</v>
        <v>X2 = Format | FormatArgs</v>
      </type>
      <desc><marker id="print-2"/>
        <p>Equivalent to <seealso marker="#print-4"><c>ct:print(Category,
          Importance, Format, FormatArgs)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>print(X1, X2, X3) -&gt; ok</name>
      <fsummary>Equivalent to print(Category, Importance, Format,
        FormatArgs).</fsummary>
      <type>
        <v>X1 = Category | Importance</v>
        <v>X2 = Importance | Format</v>
        <v>X3 = Format | FormatArgs</v>
      </type>
      <desc><marker id="print-3"/>
        <p>Equivalent to <seealso marker="#print-4"><c>ct:print(Category,
          Importance, Format, FormatArgs)</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>print(Category, Importance, Format, FormatArgs) -&gt; ok</name>
      <fsummary>Prints from a test case to the console.</fsummary>
      <type>
        <v>Category = atom()</v>
        <v>Importance = integer()</v>
        <v>Format = string()</v>
        <v>FormatArgs = list()</v>
      </type>
      <desc><marker id="print-4"/>
        <p>Prints from a test case to the console.</p>

        <p>This function is meant for printing a string from a test case to
          the console.</p>

        <p>Default <c>Category</c> is <c>default</c>,
          default <c>Importance</c> is <c>?STD_IMPORTANCE</c>,
          and default value for <c>FormatArgs</c> is <c>[]</c>.</p>

        <p>For details on <c>Category</c> and <c>Importance</c>, see section
          <seealso marker="write_test_chapter#logging">Logging - Categories
          and Verbosity Levels</seealso> in the User's Guide.</p>
      </desc>
    </func>

    <func>
      <name>reload_config(Required) -&gt; ValueOrElement</name>
      <fsummary>Reloads configuration file containing specified configuration
        key.</fsummary>
      <type>
        <v>Required = KeyOrName | {KeyOrName, SubKey} | {KeyOrName, SubKey, SubKey}</v>
        <v>KeyOrName = atom()</v>
        <v>SubKey = atom()</v>
        <v>ValueOrElement = term()</v>
      </type>
      <desc><marker id="reload_config-1"/>
        <p>Reloads configuration file containing specified configuration key.</p>

        <p>This function updates the configuration data from which the
          specified configuration variable was read, and returns the (possibly)
          new value of this variable.</p>

        <p>If some variables were present in the configuration, but are
          not loaded using this function, they are removed from the
          configuration table together with their aliases.</p>
      </desc>
    </func>

    <func>
      <name>remove_config(Callback, Config) -&gt; ok</name>
      <fsummary>Removes configuration variables (together with
        their aliases) that were loaded with specified callback module and
        configuration string.</fsummary>
      <type>
        <v>Callback = atom()</v>
        <v>Config = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="remove_config-2"/>
        <p>Removes configuration variables (together wih their aliases)
          that were loaded with specified callback module and configuration
          string.</p>
      </desc>
    </func>

    <func>
      <name>require(Required) -&gt; ok | {error, Reason}</name>
      <fsummary>Checks if the required configuration is available.</fsummary>
      <type>
        <v>Required = Key | {Key, SubKeys} | {Key, SubKey, SubKeys}</v>
        <v>Key = atom()</v>
        <v>SubKeys = SubKey | [SubKey]</v>
        <v>SubKey = atom()</v>
      </type>
      <desc><marker id="require-1"/>
        <p>Checks if the required configuration is available. Arbitrarily
          deep tuples can be specified as <c>Required</c>. Only the last
          element of the tuple can be a list of <c>SubKey</c>s.</p>

        <p><em>Example 1.</em> Require the variable <c>myvar</c>:</p>

        <pre>
 ok = ct:require(myvar).</pre>
 
        <p>In this case the configuration file must at least contain:</p>

        <pre>
 {myvar,Value}.</pre>
  
        <p><em>Example 2.</em> Require key <c>myvar</c> with subkeys
          <c>sub1</c> and <c>sub2</c>:</p>

        <pre>
 ok = ct:require({myvar,[sub1,sub2]}).</pre>

        <p>In this case the configuration file must at least contain:</p>

        <pre>
 {myvar,[{sub1,Value},{sub2,Value}]}.</pre>

        <p><em>Example 3.</em> Require key <c>myvar</c> with subkey
          <c>sub1</c> with <c>subsub1</c>:</p>

        <pre>
 ok = ct:require({myvar,sub1,sub2}).</pre>

        <p>In this case the configuration file must at least contain:</p>

        <pre>
 {myvar,[{sub1,[{sub2,Value}]}]}.</pre>

        <p>See also
          <seealso marker="#get_config-1"><c>ct:get_config/1</c></seealso>,
          <seealso marker="#get_config-2"><c>ct:get_config/2</c></seealso>,
          <seealso marker="#get_config-3"><c>ct:get_config/3</c></seealso>,
          <seealso marker="#require-2"><c>ct:require/2</c></seealso>.</p>
        </desc>
    </func>

    <func>
      <name>require(Name, Required) -&gt; ok | {error, Reason}</name>
      <fsummary>Checks if the required configuration is available and gives
        it a name.</fsummary>
      <type>
        <v>Name = atom()</v>
        <v>Required = Key | {Key, SubKey} | {Key, SubKey, SubKey}</v>
        <v>SubKey = Key</v>
        <v>Key = atom()</v>
      </type>
      <desc><marker id="require-2"/>
        <p>Checks if the required configuration is available and gives it a
          name. The semantics for <c>Required</c> is the same as in
          <seealso marker="#require-1"><c>ct:require/1</c></seealso> except
          that a list of <c>SubKey</c>s cannot be specified.</p>

       <p>If the requested data is available, the subentry is associated
         with <c>Name</c> so that the value of the element can be read with
         <seealso marker="#get_config-1"><c>ct:get_config/1,2</c></seealso>
         provided <c>Name</c> is used instead of the whole <c>Required</c>
         term.</p>

       <p><em>Example:</em></p>

       <p>Require one node with a Telnet connection and an FTP connection.
         Name the node <c>a</c>:</p>

       <pre>
 ok = ct:require(a,{machine,node}).</pre>

        <p>All references to this node can then use the node name. For
          example, a file over FTP is fetched like follows:</p>

        <pre>
 ok = ct:ftp_get(a,RemoteFile,LocalFile).</pre>

        <p>For this to work, the configuration file must at least contain:</p>

        <pre>
 {machine,[{node,[{telnet,IpAddr},{ftp,IpAddr}]}]}.</pre>

        <note><p>The behavior of this function changed radically in
          <c>Common Test</c> 1.6.2. To keep some backwards compatability,
          it is still possible to do:<br/>
          <c>ct:require(a,{node,[telnet,ftp]}).</c><br/>
          This associates the name <c>a</c> with the top-level <c>node</c>
          entry. For this to work, the configuration file must at least
          contain:<br/>
          <c>{node,[{telnet,IpAddr},{ftp,IpAddr}]}.</c></p>
        </note>

        <p>See also
          <seealso marker="#get_config-1"><c>ct:get_config/1</c></seealso>,
          <seealso marker="#get_config-2"><c>ct:get_config/2</c></seealso>,
          <seealso marker="#get_config-3"><c>ct:get_config/3</c></seealso>,
          <seealso marker="#require-1"><c>ct:require/1</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>run(TestDirs) -&gt; Result</name>
      <fsummary>Runs all test cases in all suites in the specified
        directories.</fsummary>
      <type>
        <v>TestDirs = TestDir | [TestDir]</v>
      </type>
      <desc><marker id="run-1"/>
        <p>Runs all test cases in all suites in the specified directories.</p>

        <p>See also <seealso marker="#run-3"><c>ct:run/3</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>run(TestDir, Suite) -&gt; Result</name>
      <fsummary>Runs all test cases in the specified suite.</fsummary>
      <desc><marker id="run-2"/>
        <p>Runs all test cases in the specified suite.</p>

        <p>See also <seealso marker="#run-3"><c>ct:run/3</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>run(TestDir, Suite, Cases) -&gt; Result</name>
      <fsummary>Runs the specified test cases.</fsummary>
      <type>
        <v>TestDir = string()</v>
        <v>Suite = atom()</v>
        <v>Cases = atom() | [atom()]</v>
        <v>Result = [TestResult] | {error, Reason}</v>
      </type>
      <desc><marker id="run-3"/>
        <p>Runs the specified test cases.</p>

        <p>Requires that
          <seealso marker="#install-1"><c>ct:install/1</c></seealso> has been
            run first.</p>

        <p>Suites (<c>*_SUITE.erl</c>) files must be stored in <c>TestDir</c>
          or <c>TestDir/test</c>. All suites are compiled when the test is
          run.</p>
      </desc>
    </func>

    <func>
      <name>run_test(Opts) -&gt; Result</name>
      <fsummary>Runs tests as specified by the combination of options in
        Opts.</fsummary>
      <type>
        <v>Opts = [OptTuples]</v>
        <v>OptTuples = {dir, TestDirs} | {suite, Suites} | {group, Groups} | {testcase, Cases} | {spec, TestSpecs} | {join_specs, Bool} | {label, Label} | {config, CfgFiles} | {userconfig, UserConfig} | {allow_user_terms, Bool} | {logdir, LogDir} | {silent_connections, Conns} | {stylesheet, CSSFile} | {cover, CoverSpecFile} | {cover_stop, Bool} | {step, StepOpts} | {event_handler, EventHandlers} | {include, InclDirs} | {auto_compile, Bool} | {abort_if_missing_suites, Bool} | {create_priv_dir, CreatePrivDir} | {multiply_timetraps, M} | {scale_timetraps, Bool} | {repeat, N} | {duration, DurTime} | {until, StopTime} | {force_stop, ForceStop} | {decrypt, DecryptKeyOrFile} | {refresh_logs, LogDir} | {logopts, LogOpts} | {verbosity, VLevels} | {basic_html, Bool} | {ct_hooks, CTHs} | {enable_builtin_hooks, Bool} | {release_shell, Bool}</v>
        <v>TestDirs = [string()] | string()</v>
        <v>Suites = [string()] | [atom()] | string() | atom()</v>
        <v>Cases = [atom()] | atom()</v>
        <v>Groups = GroupNameOrPath | [GroupNameOrPath]</v>
        <v>GroupNameOrPath = [atom()] | atom() | all</v>
        <v>TestSpecs = [string()] | string()</v>
        <v>Label = string() | atom()</v>
        <v>CfgFiles = [string()] | string()</v>
        <v>UserConfig = [{CallbackMod, CfgStrings}] | {CallbackMod, CfgStrings}</v>
        <v>CallbackMod = atom()</v>
        <v>CfgStrings = [string()] | string()</v>
        <v>LogDir = string()</v>
        <v>Conns = all | [atom()]</v>
        <v>CSSFile = string()</v>
        <v>CoverSpecFile = string()</v>
        <v>StepOpts = [StepOpt] | []</v>
        <v>StepOpt = config | keep_inactive</v>
        <v>EventHandlers = EH | [EH]</v>
        <v>EH = atom() | {atom(), InitArgs} | {[atom()], InitArgs}</v>
        <v>InitArgs = [term()]</v>
        <v>InclDirs = [string()] | string()</v>
        <v>CreatePrivDir = auto_per_run | auto_per_tc | manual_per_tc</v>
        <v>M = integer()</v>
        <v>N = integer()</v>
        <v>DurTime = string(HHMMSS)</v>
        <v>StopTime = string(YYMoMoDDHHMMSS) | string(HHMMSS)</v>
        <v>ForceStop = skip_rest | Bool</v>
        <v>DecryptKeyOrFile = {key, DecryptKey} | {file, DecryptFile}</v>
        <v>DecryptKey = string()</v>
        <v>DecryptFile = string()</v>
        <v>LogOpts = [LogOpt]</v>
        <v>LogOpt = no_nl | no_src</v>
        <v>VLevels = VLevel | [{Category, VLevel}]</v>
        <v>VLevel = integer()</v>
        <v>Category = atom()</v>
        <v>CTHs = [CTHModule | {CTHModule, CTHInitArgs}]</v>
        <v>CTHModule = atom()</v>
        <v>CTHInitArgs = term()</v>
        <v>Result = {Ok, Failed, {UserSkipped, AutoSkipped}} | TestRunnerPid | {error, Reason}</v>
        <v>Ok = integer()</v>
        <v>Failed = integer()</v>
        <v>UserSkipped = integer()</v>
        <v>AutoSkipped = integer()</v>
        <v>TestRunnerPid = pid()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="run_test-1"/>
        <p>Runs tests as specified by the combination of options in
          <c>Opts</c>. The options are the same as those used with program
          <c>ct_run</c>, see <seealso marker="ct_run#ct_run">Run Tests from
          Command Line</seealso> in the <c>ct_run</c> manual page.</p>
        <p>Here a <c>TestDir</c> can be used to point out the path to a
          <c>Suite</c>. Option <c>testcase</c> corresponds to option
          <c>-case</c> in program <c>ct_run</c>. Configuration files
          specified in <c>Opts</c> are installed automatically at startup.</p>

        <p><c>TestRunnerPid</c> is returned if <c>release_shell == true</c>.
          For details, see
          <seealso marker="#break-1"><c>ct:break/1</c></seealso>.</p>

        <p><c>Reason</c> indicates the type of error encountered.</p>
      </desc>
    </func>

    <func>
      <name>run_testspec(TestSpec) -&gt; Result</name>
      <fsummary>Runs a test specified by TestSpec.</fsummary>
      <type>
        <v>TestSpec = [term()]</v>
        <v>Result = {Ok, Failed, {UserSkipped, AutoSkipped}} | {error, Reason}</v>
        <v>Ok = integer()</v>
        <v>Failed = integer()</v>
        <v>UserSkipped = integer()</v>
        <v>AutoSkipped = integer()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="run_testspec-1"/>
        <p>Runs a test specified by <c>TestSpec</c>. The same terms are used
          as in test specification files.</p>

        <p><c>Reason</c> indicates the type of error encountered.</p>
      </desc>
    </func>

    <func>
      <name>sleep(Time) -&gt; ok</name>
      <fsummary>This function, similar to timer:sleep/1, suspends the
        test case for a specified time.</fsummary>
      <type>
        <v>Time = {hours, Hours} | {minutes, Mins} | {seconds, Secs} | Millisecs | infinity</v>
        <v>Hours = integer()</v>
        <v>Mins = integer()</v>
        <v>Secs = integer()</v>
        <v>Millisecs = integer() | float()</v>
      </type>
      <desc><marker id="sleep-1"/>
        <p>This function, similar to <c>timer:sleep/1</c> in <c>STDLIB</c>, 
          suspends the test case for a specified time.
          However, this function also multiplies <c>Time</c> with the
          <c>multiply_timetraps</c> value (if set) and under certain
          circumstances also scales up the time automatically if
          <c>scale_timetraps</c> is set to <c>true</c> (default is
          <c>false</c>).</p>
      </desc>
    </func>

    <func>
      <name>start_interactive() -&gt; ok</name>
      <fsummary>Starts <c>Common Test</c> in interactive mode.</fsummary>
      <desc><marker id="start_interactive-0"/>
        <p>Starts <c>Common Test</c> in interactive mode.</p>

        <p>From this mode, all test case support functions can be executed
          directly from the Erlang shell. The interactive mode can also be
          started from the OS command line with <c>ct_run -shell
          [-config File...]</c>.</p>

        <p>If any functions (for example, Telnet or FTP) using
          "required configuration data" are to be called from the Erlang shell,
          configuration data must first be required with
          <seealso marker="#require-2"><c>ct:require/2</c></seealso>.</p>

        <p><em>Example:</em></p>

        <pre>
 &gt; ct:require(unix_telnet, unix).
 ok
 &gt; ct_telnet:open(unix_telnet).
 {ok,&lt;0.105.0&gt;}
 &gt; ct_telnet:cmd(unix_telnet, "ls .").
 {ok,["ls","file1  ...",...]}</pre>
      </desc>
    </func>

    <func>
      <name>step(TestDir, Suite, Case) -&gt; Result</name>
      <fsummary>Steps through a test case with the debugger.</fsummary>
      <type>
        <v>Case = atom()</v>
      </type>
      <desc><marker id="step-3"/>
        <p>Steps through a test case with the debugger.</p>

        <p>See also <seealso marker="#run-3"><c>ct:run/3</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>step(TestDir, Suite, Case, Opts) -&gt; Result</name>
      <fsummary>Steps through a test case with the debugger.</fsummary>
      <type>
        <v>Case = atom()</v>
        <v>Opts = [Opt] | []</v>
        <v>Opt = config | keep_inactive</v>
      </type>
      <desc><marker id="step-4"/>
        <p>Steps through a test case with the debugger. If option
          <c>config</c> has been specifed, breakpoints are also set on
          the configuration functions in <c>Suite</c>.</p>

        <p>See also <seealso marker="#run-3"><c>ct:run/3</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>stop_interactive() -&gt; ok</name>
      <fsummary>Exits the interactive mode.</fsummary>
      <desc><marker id="stop_interactive-0"/>
        <p>Exits the interactive mode.</p>

        <p>See also
          <seealso marker="#start_interactive-0"><c>ct:start_interactive/0</c></seealso>.
        </p>
      </desc>
    </func>

    <func>
      <name>sync_notify(Name, Data) -&gt; ok</name>
      <fsummary>Sends a synchronous notification of type Name with Data to
        the <c>Common Test</c> event manager.</fsummary>
      <type>
        <v>Name = atom()</v>
        <v>Data = term()</v>
      </type>
      <desc><marker id="sync_notify-2"/>
        <p>Sends a synchronous notification of type <c>Name</c> with
          <c>Data</c> to the <c>Common Test</c> event manager. This can later be
          caught by any installed event manager.</p>

        <p>See also
          <seealso marker="stdlib:gen_event"><c>stdlib:gen_event(3)</c></seealso>.
        </p>
      </desc>
    </func>

    <func>
      <name>testcases(TestDir, Suite) -&gt; Testcases | {error, Reason}</name>
      <fsummary>Returns all test cases in the specified suite.</fsummary>
      <type>
        <v>TestDir = string()</v>
        <v>Suite = atom()</v>
        <v>Testcases = list()</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="testcases-2"/>
        <p>Returns all test cases in the specified suite.</p>
      </desc>
    </func>

    <func>
      <name>timetrap(Time) -&gt; ok</name>
      <fsummary>Sets a new timetrap for the running test case.</fsummary>
      <type>
        <v>Time = {hours, Hours} | {minutes, Mins} | {seconds, Secs} | Millisecs | infinity | Func</v>
        <v>Hours = integer()</v>
        <v>Mins = integer()</v>
        <v>Secs = integer()</v>
        <v>Millisecs = integer() | float()</v>
        <v>Func = {M, F, A} | function()</v>
        <v>M = atom()</v>
        <v>F = atom()</v>
        <v>A = list()</v>
      </type>
      <desc><marker id="timetrap-1"/>
        <p>Sets a new timetrap for the running test case.</p>

        <p>If the argument is <c>Func</c>, the timetrap is triggered when
          this function returns. <c>Func</c> can also return a new
          <c>Time</c> value, which in that case is the value for the new
          timetrap.</p>
      </desc>
    </func>

    <func>
      <name>userdata(TestDir, Suite) -&gt; SuiteUserData | {error, Reason}</name>
      <fsummary>Returns any data specified with tag userdata in the list of
        tuples returned from Suite:suite/0.</fsummary>
      <type>
        <v>TestDir = string()</v>
        <v>Suite = atom()</v>
        <v>SuiteUserData = [term()]</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="userdata-2"/>
        <p>Returns any data specified with tag <c>userdata</c> in the list
          of tuples returned from
          <seealso marker="common_test#Module:suite-0"><c>suite/0</c></seealso>.</p>
      </desc>
    </func>

    <func>
      <name>userdata(TestDir, Suite, Case::GroupOrCase) -&gt; TCUserData | {error, Reason}</name>
      <fsummary>Returns any data specified with tag userdata in the list of
        tuples returned from Suite:group(GroupName) or Suite:Case().</fsummary>
      <type>
        <v>TestDir = string()</v>
        <v>Suite = atom()</v>
        <v>GroupOrCase = {group, GroupName} | atom()</v>
        <v>GroupName = atom()</v>
        <v>TCUserData = [term()]</v>
        <v>Reason = term()</v>
      </type>
      <desc><marker id="userdata-3"/>
        <p>Returns any data specified with tag <c>userdata</c> in the list
          of tuples returned from <c>Suite:group(GroupName)</c> or
          <c>Suite:Case()</c>.</p>
      </desc>
    </func>
  </funcs>

</erlref>