path: root/lib/compiler/src/v3_kernel.erl

%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 1999-2017. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%%     http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%% Purpose : Transform Core Erlang to Kernel Erlang

%% Kernel erlang is like Core Erlang with a few significant
%% differences:
%%
%% 1. It is flat!  There are no nested calls or sub-blocks.
%%
%% 2. All variables are unique in a function.  There is no scoping, or
%% rather the scope is the whole function.
%%
%% 3. Pattern matching (in cases and receives) has been compiled.
%%
%% 4. The annotations contain variable usages.  Seeing we have to work
%% this out anyway for funs we might as well pass it on for free to
%% later passes.
%%
%% 5. All remote-calls are to statically named m:f/a. Meta-calls are
%% passed via erlang:apply/3.
%%
%% The translation is done in two passes:
%%
%% 1. Basic translation, translate variable/function names, flatten
%% completely, pattern matching compilation.
%%
%% 2. Fun-lifting (lambda-lifting), variable usage annotation and
%% last-call handling.
%%
%% All new Kexprs are created in the first pass, they are just
%% annotated in the second.
%%
%% Functions and BIFs
%%
%% Functions are "call"ed or "enter"ed if it is a last call, their
%% return values may be ignored.  BIFs are things which are known to
%% be internal by the compiler and can only be called, their return
%% values cannot be ignored.
%%
%% Letrec's are handled rather naively.  All the functions in one
%% letrec are handled as one block to find the free variables.  While
%% this is not optimal it reflects how letrec's often are used.  We
%% don't have to worry about variable shadowing and nested letrec's as
%% this is handled in the variable/function name translation.  There
%% is a little bit of trickery to ensure letrec transformations fit
%% into the scheme of things.
%%
%% To ensure unique variable names we use a variable substitution
%% table and keep the set of all defined variables.  The nested
%% scoping of Core means that we must also nest the substitution
%% tables, but the defined set must be passed through to match the
%% flat structure of Kernel and to make sure variables with the same
%% name from different scopes get different substitutions.
%%
%% We also use these substitutions to handle the variable renaming
%% necessary in pattern matching compilation.
%%
%% The pattern matching compilation assumes that the values of
%% different types don't overlap.  This means that as there is no
%% character type yet in the machine all characters must be converted
%% to integers!

-module(v3_kernel).

-export([module/2,format_error/1]).

-import(lists, [map/2,foldl/3,foldr/3,mapfoldl/3,splitwith/2,member/2,
		keymember/3,keyfind/3,partition/2,droplast/1,last/1,sort/1]).
-import(ordsets, [add_element/2,del_element/2,union/2,union/1,subtract/2]).
-import(cerl, [c_tuple/1]).

-include("core_parse.hrl").
-include("v3_kernel.hrl").

%% These are not defined in v3_kernel.hrl.
get_kanno(Kthing) -> element(2, Kthing).
set_kanno(Kthing, Anno) -> setelement(2, Kthing, Anno).
copy_anno(Kdst, Ksrc) ->
    Anno = get_kanno(Ksrc),
    set_kanno(Kdst, Anno).

%% Internal kernel expressions and help functions.
%% N.B. the annotation field is ALWAYS the first field!

-record(ivalues, {anno=[],args}).
-record(ifun, {anno=[],vars,body}).
-record(iset, {anno=[],vars,arg,body}).
-record(iletrec, {anno=[],defs}).
-record(ialias, {anno=[],vars,pat}).
-record(iclause, {anno=[],isub,osub,pats,guard,body}).
-record(ireceive_accept, {anno=[],arg}).
-record(ireceive_next, {anno=[],arg}).

-type warning() :: term().	% XXX: REFINE

%% State record for kernel translator.
-record(kern, {func,				%Current host function
	       ff,				%Current function
	       vcount=0,			%Variable counter
	       fcount=0,			%Fun counter
               ds=cerl_sets:new() :: cerl_sets:set(), %Defined variables
	       funs=[],				%Fun functions
	       free=#{},			%Free variables
	       ws=[]   :: [warning()],		%Warnings.
	       guard_refc=0}).			%> 0 means in guard

-spec module(cerl:c_module(), [compile:option()]) ->
	{'ok', #k_mdef{}, [warning()]}.

module(#c_module{anno=A,name=M,exports=Es,attrs=As,defs=Fs}, _Options) ->
    Kas = attributes(As),
    Kes = map(fun (#c_var{name={_,_}=Fname}) -> Fname end, Es),
    St0 = #kern{},
    {Kfs,St} = mapfoldl(fun function/2, St0, Fs),
    {ok,#k_mdef{anno=A,name=M#c_literal.val,exports=Kes,attributes=Kas,
		body=Kfs ++ St#kern.funs},lists:sort(St#kern.ws)}.

attributes([{#c_literal{val=Name},#c_literal{val=Val}}|As]) ->
    case include_attribute(Name) of
	false ->
	    attributes(As);
	true ->
	    [{Name,Val}|attributes(As)]
    end;
attributes([]) -> [].

include_attribute(type) -> false;
include_attribute(spec) -> false;
include_attribute(callback) -> false;
include_attribute(opaque) -> false;
include_attribute(export_type) -> false;
include_attribute(record) -> false;
include_attribute(optional_callbacks) -> false;
include_attribute(file) -> false;
include_attribute(compile) -> false;
include_attribute(_) -> true.

function({#c_var{name={F,Arity}=FA},Body}, St0) ->
    %%io:format("~w/~w~n", [F,Arity]),
    try
	St1 = St0#kern{func=FA,ff=undefined,vcount=0,fcount=0,ds=cerl_sets:new()},
	{#ifun{anno=Ab,vars=Kvs,body=B0},[],St2} = expr(Body, new_sub(), St1),
	{B1,_,St3} = ubody(B0, return, St2),
	%%B1 = B0, St3 = St2,				%Null second pass
	{#k_fdef{anno=#k{us=[],ns=[],a=Ab},
		 func=F,arity=Arity,vars=Kvs,body=B1},St3}
    catch
	Class:Error ->
	    Stack = erlang:get_stacktrace(),
	    io:fwrite("Function: ~w/~w\n", [F,Arity]),
	    erlang:raise(Class, Error, Stack)
    end.


%% body(Cexpr, Sub, State) -> {Kexpr,[PreKepxr],State}.
%%  Do the main sequence of a body.  A body ends in an atomic value or
%%  values.  Must check if vector first so do expr.

body(#c_values{anno=A,es=Ces}, Sub, St0) ->
    %% Do this here even if only in bodies.
    {Kes,Pe,St1} = atomic_list(Ces, Sub, St0),
    %%{Kes,Pe,St1} = expr_list(Ces, Sub, St0),
    {#ivalues{anno=A,args=Kes},Pe,St1};
body(#ireceive_next{anno=A}, _, St) ->
    {#k_receive_next{anno=A},[],St};
body(Ce, Sub, St0) ->
    expr(Ce, Sub, St0).

%% guard(Cexpr, Sub, State) -> {Kexpr,State}.
%%  We handle guards almost as bodies. The only special thing we
%%  must do is to make the final Kexpr a #k_test{}.
%%  Also, we wrap the entire guard in a try/catch which is
%%  not strictly needed, but makes sure that every 'bif' instruction
%%  will get a proper failure label.

guard(G0, Sub, St0) ->
    {G1,St1} = wrap_guard(G0, St0),
    {Ge0,Pre,St2} = expr(G1, Sub, St1),
    {Ge1,St3} = gexpr_test(Ge0, St2),
    {Ge,St} = guard_opt(Ge1, St3),
    {pre_seq(Pre, Ge),St}.

%% guard_opt(Kexpr, State) -> {Kexpr,State}.
%%  Optimize the Kexpr for the guard.  Instead of evaluating a boolean
%%  expression comparing it to 'true' in a final #k_test{},
%%  replace BIF calls with #k_test{} in the expression.
%%
%%  As an example, take the guard:
%%
%%     when is_integer(V0), is_atom(V1) ->
%%
%%  The unoptimized Kexpr translated to pseudo BEAM assembly
%%  code would look like:
%%
%%     bif is_integer V0 => Bool0
%%     bif is_atom V1    => Bool1
%%     bif and Bool0 Bool1 => Bool
%%     test Bool =:= true else goto Fail
%%     ...
%%   Fail:
%%     ...
%%
%%  The optimized code would look like:
%%
%%     test is_integer V0 else goto Fail
%%     test is_atom V1    else goto Fail
%%     ...
%%   Fail:
%%     ...
%%
%%  An 'or' operation is only slightly more complicated:
%%
%%     test is_integer V0 else goto NotFailedYet
%%     goto Success
%%
%%   NotFailedYet:
%%     test is_atom V1 else goto Fail
%%
%%   Success:
%%     ...
%%   Fail:
%%     ...

guard_opt(G, St0) ->
    {Root,Forest0,St1} = make_forest(G, St0),
    {Exprs,Forest,St} = rewrite_bool(Root, Forest0, false, St1),
    E = forest_pre_seq(Exprs, Forest),
    {G#k_try{arg=E},St}.

%% rewrite_bool(Kexpr, Forest, Inv, St) -> {[Kexpr],Forest,St}.
%%  Rewrite Kexpr to use #k_test{} operations instead of comparison
%%  and type test BIFs.
%%
%%  If Kexpr is a #k_test{} operation, the call will always
%%  succeed. Otherwise, a 'not_possible' exception will be
%%  thrown if Kexpr cannot be rewritten.

rewrite_bool(#k_test{op=#k_remote{mod=#k_atom{val=erlang},name=#k_atom{val='=:='}},
		args=[#k_var{}=V,#k_atom{val=true}]}=Test, Forest0, Inv, St0) ->
    try rewrite_bool_var(V, Forest0, Inv, St0) of
	{_,_,_}=Res ->
	    Res
    catch
	throw:not_possible ->
	    {[Test],Forest0,St0}
    end;
rewrite_bool(#k_test{op=#k_remote{mod=#k_atom{val=erlang},name=#k_atom{val='=:='}},
		args=[#k_var{}=V,#k_atom{val=false}]}=Test, Forest0, Inv, St0) ->
    try rewrite_bool_var(V, Forest0, not Inv, St0) of
	{_,_,_}=Res ->
	    Res
    catch
	throw:not_possible ->
	    {[Test],Forest0,St0}
    end;
rewrite_bool(#k_test{op=#k_remote{mod=#k_atom{val=erlang},name=#k_atom{val='=:='}},
		args=[#k_atom{val=V1},#k_atom{val=V2}]}, Forest0, false, St0) ->
    case V1 =:= V2 of
	true ->
	    {[make_test(is_boolean, [#k_atom{val=true}])],Forest0,St0};
	false ->
	    {[make_failing_test()],Forest0,St0}
    end;
rewrite_bool(#k_test{}=Test, Forest, false, St) ->
    {[Test],Forest,St};
rewrite_bool(#k_try{vars=[#k_var{name=X}],body=#k_var{name=X},
			    handler=#k_atom{val=false},ret=[]}=Prot,
		     Forest0, Inv, St0) ->
    {Root,Forest1,St1} = make_forest(Prot, Forest0, St0),
    {Exprs,Forest2,St} = rewrite_bool(Root, Forest1, Inv, St1),
    InnerForest = maps:without(maps:keys(Forest0), Forest2),
    Forest = maps:without(maps:keys(InnerForest), Forest2),
    E = forest_pre_seq(Exprs, InnerForest),
    {[Prot#k_try{arg=E}],Forest,St};
rewrite_bool(#k_match{body=Body,ret=[]}, Forest, Inv, St) ->
    rewrite_match(Body, Forest, Inv, St);
rewrite_bool(Other, Forest, Inv, St) ->
    case extract_bif(Other) of
	{Name,Args} ->
	    rewrite_bif(Name, Args, Forest, Inv, St);
	error ->
	    throw(not_possible)
    end.

%% rewrite_bool_var(Var, Forest, Inv, St) -> {[Kexpr],Forest,St}.
%%  Rewrite the boolean expression whose key in Forest is
%%  given by Var. Throw a 'not_possible' expression if something
%%  prevents the rewriting.

rewrite_bool_var(Arg, Forest0, Inv, St) ->
    {Expr,Forest} = forest_take_expr(Arg, Forest0),
    rewrite_bool(Expr, Forest, Inv, St).

%% rewrite_bool_args([Kexpr], Forest, Inv, St) -> {[[Kexpr]],Forest,St}.
%%  Rewrite each Kexpr in the list. The input Kexpr should be variables
%%  or boolean values. Throw a 'not_possible' expression if something
%%  prevents the rewriting.
%%
%%  This function is suitable for handling the arguments for both
%%  'and' and 'or'.

rewrite_bool_args([#k_atom{val=B}=A|Vs], Forest0, false=Inv, St0) when is_boolean(B) ->
    {Tail,Forest1,St1} = rewrite_bool_args(Vs, Forest0, Inv, St0),
    Bif = make_bif('=:=', [A,#k_atom{val=true}]),
    {Exprs,Forest,St} = rewrite_bool(Bif, Forest1, Inv, St1),
    {[Exprs|Tail],Forest,St};
rewrite_bool_args([#k_var{}=Var|Vs], Forest0, false=Inv, St0) ->
    {Tail,Forest1,St1} = rewrite_bool_args(Vs, Forest0, Inv, St0),
    {Exprs,Forest,St} =
	case is_bool_expr(Var, Forest0) of
	    true ->
		rewrite_bool_var(Var, Forest1, Inv, St1);
	    false ->
		Bif = make_bif('=:=', [Var,#k_atom{val=true}]),
		rewrite_bool(Bif, Forest1, Inv, St1)
	end,
    {[Exprs|Tail],Forest,St};
rewrite_bool_args([_|_], _Forest, _Inv, _St) ->
    throw(not_possible);
rewrite_bool_args([], Forest, _Inv, St) ->
    {[],Forest,St}.

%% rewrite_bif(Name, [Kexpr], Forest, Inv, St) -> {[Kexpr],Forest,St}.
%%  Rewrite a BIF. Throw a 'not_possible' expression if something
%%  prevents the rewriting.

rewrite_bif('or', Args, Forest, true, St) ->
    rewrite_not_args('and', Args, Forest, St);
rewrite_bif('and', Args, Forest, true, St) ->
    rewrite_not_args('or', Args, Forest, St);
rewrite_bif('and', [#k_atom{val=Val},Arg], Forest0, Inv, St0) ->
    false = Inv,				%Assertion.
    case Val of
	true ->
	    %% The result only depends on Arg.
	    rewrite_bool_var(Arg, Forest0, Inv, St0);
	_ ->
	    %% Will fail. There is no need to evalute the expression
	    %% represented by Arg. Take it out from the forest and
	    %% discard the expression.
	    Failing = make_failing_test(),
	    try rewrite_bool_var(Arg, Forest0, Inv, St0) of
		{_,Forest,St} ->
		    {[Failing],Forest,St}
	    catch
		throw:not_possible ->
		    try forest_take_expr(Arg, Forest0) of
			{_,Forest} ->
			    {[Failing],Forest,St0}
		    catch
			throw:not_possible ->
			    %% Arg is probably a variable bound in an
			    %% outer scope.
			    {[Failing],Forest0,St0}
		    end
	    end
    end;
rewrite_bif('and', [Arg,#k_atom{}=Atom], Forest, Inv, St) ->
    false = Inv,				%Assertion.
    rewrite_bif('and', [Atom,Arg], Forest, Inv, St);
rewrite_bif('and', Args, Forest0, Inv, St0) ->
    false = Inv,				%Assertion.
    {[Es1,Es2],Forest,St} = rewrite_bool_args(Args, Forest0, Inv, St0),
    {Es1 ++ Es2,Forest,St};
rewrite_bif('or', Args, Forest0, Inv, St0) ->
    false = Inv,				%Assertion.
    {[First,Then],Forest,St} = rewrite_bool_args(Args, Forest0, Inv, St0),
    Alt = make_alt(First, Then),
    {[Alt],Forest,St};
rewrite_bif('xor', [_,_], _Forest, _Inv, _St) ->
    %% Rewriting 'xor' is not practical. Fortunately, 'xor' is
    %% almost never used in practice.
    throw(not_possible);
rewrite_bif('not', [Arg], Forest0, Inv, St) ->
    {Expr,Forest} = forest_take_expr(Arg, Forest0),
    rewrite_bool(Expr, Forest, not Inv, St);
rewrite_bif(Op, Args, Forest, Inv, St) ->
    case is_test(Op, Args) of
	true ->
	    rewrite_bool(make_test(Op, Args, Inv), Forest, false, St);
	false ->
	    throw(not_possible)
    end.

rewrite_not_args(Op, [A0,B0], Forest0, St0) ->
    {A,Forest1,St1} = rewrite_not_args_1(A0, Forest0, St0),
    {B,Forest2,St2} = rewrite_not_args_1(B0, Forest1, St1),
    rewrite_bif(Op, [A,B], Forest2, false, St2).

rewrite_not_args_1(Arg, Forest, St) ->
    Not = make_bif('not', [Arg]),
    forest_add_expr(Not, Forest, St).

%% rewrite_match(Kvar, TypeClause, Forest, Inv, St) ->
%%       {[Kexpr],Forest,St}.
%%  Try to rewrite a #k_match{} originating from an 'andalso' or an 'orelse'.

rewrite_match(#k_alt{first=First,then=Then}, Forest, Inv, St) ->
    case {First,Then} of
	{#k_select{var=#k_var{name=V}=Var,types=[TypeClause]},#k_var{name=V}} ->
	    rewrite_match_1(Var, TypeClause, Forest, Inv, St);
	{_,_} ->
	    throw(not_possible)
    end.

rewrite_match_1(Var, #k_type_clause{values=Cs0}, Forest0, Inv, St0) ->
    Cs = sort([{Val,B} || #k_val_clause{val=#k_atom{val=Val},body=B} <- Cs0]),
    case Cs of
	[{false,False},{true,True}] ->
	    rewrite_match_2(Var, False, True, Forest0, Inv, St0);
	_ ->
	    throw(not_possible)
    end.

rewrite_match_2(Var, False, #k_atom{val=true}, Forest0, Inv, St0) ->
    %% Originates from an 'orelse'.
    case False of
	#k_atom{val=NotBool} when not is_boolean(NotBool) ->
	    rewrite_bool(Var, Forest0, Inv, St0);
	_ ->
	    {CodeVar,Forest1,St1} = add_protected_expr(False, Forest0, St0),
	    rewrite_bif('or', [Var,CodeVar], Forest1, Inv, St1)
    end;
rewrite_match_2(Var, #k_atom{val=false}, True, Forest0, Inv, St0) ->
    %% Originates from an 'andalso'.
    {CodeVar,Forest1,St1} = add_protected_expr(True, Forest0, St0),
    rewrite_bif('and', [Var,CodeVar], Forest1, Inv, St1);
rewrite_match_2(_V, _, _, _Forest, _Inv, _St) ->
    throw(not_possible).

%% is_bool_expr(#k_var{}, Forest) -> true|false.
%%  Return true if the variable refers to a boolean expression
%%  that does not need an explicit '=:= true' test.

is_bool_expr(V, Forest) ->
    case forest_peek_expr(V, Forest) of
	error ->
	    %% Defined outside of the guard. We can't know.
	    false;
	Expr ->
	    case extract_bif(Expr) of
		{Name,Args} ->
		    is_test(Name, Args) orelse
			erl_internal:bool_op(Name, length(Args));
		error ->
		    %% Not a BIF. Should be possible to rewrite
		    %% to a boolean. Definitely does not need
		    %% a '=:= true' test.
		    true
	    end
    end.

make_bif(Op, Args) ->
    #k_bif{op=#k_remote{mod=#k_atom{val=erlang},
			name=#k_atom{val=Op},
			arity=length(Args)},
	   args=Args}.

extract_bif(#k_bif{op=#k_remote{mod=#k_atom{val=erlang},
				 name=#k_atom{val=Name}},
		    args=Args}) ->
    {Name,Args};
extract_bif(_) ->
    error.

%% make_alt(First, Then) -> KMatch.
%%  Make a #k_alt{} within a #k_match{} to implement
%%  'or' or 'orelse'.

make_alt(First0, Then0) ->
    First1 = pre_seq(droplast(First0), last(First0)),
    Then1 = pre_seq(droplast(Then0), last(Then0)),
    First2 = make_protected(First1),
    Then2 = make_protected(Then1),
    Body = #k_atom{val=ignored},
    First3 = #k_guard_clause{guard=First2,body=Body},
    Then3 = #k_guard_clause{guard=Then2,body=Body},
    First = #k_guard{clauses=[First3]},
    Then = #k_guard{clauses=[Then3]},
    Alt = #k_alt{first=First,then=Then},
    #k_match{vars=[],body=Alt}.

add_protected_expr(#k_atom{}=Atom, Forest, St) ->
    {Atom,Forest,St};
add_protected_expr(#k_var{}=Var, Forest, St) ->
    {Var,Forest,St};
add_protected_expr(E0, Forest, St) ->
    E = make_protected(E0),
    forest_add_expr(E, Forest, St).

make_protected(#k_try{}=Try) ->
    Try;
make_protected(B) ->
    #k_try{arg=B,vars=[#k_var{name=''}],body=#k_var{name=''},
	   handler=#k_atom{val=false}}.

make_failing_test() ->
    make_test(is_boolean, [#k_atom{val=fail}]).

make_test(Op, Args) ->
    make_test(Op, Args, false).

make_test(Op, Args, Inv) ->
    Remote = #k_remote{mod=#k_atom{val=erlang},
		       name=#k_atom{val=Op},
		       arity=length(Args)},
    #k_test{op=Remote,args=Args,inverted=Inv}.

is_test(Op, Args) ->
    A = length(Args),
    erl_internal:new_type_test(Op, A) orelse erl_internal:comp_op(Op, A).

%% make_forest(Kexpr, St) -> {RootKexpr,Forest,St}.
%%  Build a forest out of Kexpr. RootKexpr is the final expression
%%  nested inside Kexpr.

make_forest(G, St) ->
    make_forest_1(G, #{}, 0, St).

%% make_forest(Kexpr, St) -> {RootKexpr,Forest,St}.
%%  Add to Forest from Kexpr. RootKexpr is the final expression
%%  nested inside Kexpr.

make_forest(G, Forest0, St) ->
    N = forest_next_index(Forest0),
    make_forest_1(G, Forest0, N, St).

make_forest_1(#k_try{arg=B}, Forest, I, St) ->
    make_forest_1(B, Forest, I, St);
make_forest_1(#iset{vars=[]}=Iset0, Forest, I, St0) ->
    {UnrefVar,St} = new_var(St0),
    Iset = Iset0#iset{vars=[UnrefVar]},
    make_forest_1(Iset, Forest, I, St);
make_forest_1(#iset{vars=[#k_var{name=V}],arg=Arg,body=B}, Forest0, I, St) ->
    Forest = Forest0#{V => {I,Arg}, {untaken,V} => true},
    make_forest_1(B, Forest, I+1, St);
make_forest_1(Innermost, Forest, _I, St) ->
    {Innermost,Forest,St}.

%% forest_take_expr(Kexpr, Forest) -> {Expr,Forest}.
%%  If Kexpr is a variable, take out the expression corresponding
%%  to variable in Forest. Expressions that have been taken out
%%  of the forest will not be included the Kexpr returned
%%  by forest_pre_seq/2.
%%
%%  Throw a 'not_possible' exception if Kexpr is not a variable or
%%  if the name of the variable is not a key in Forest.

forest_take_expr(#k_var{name=V}, Forest0) ->
    %% v3_core currently always generates guard expressions that can
    %% be represented as a tree.  Other code generators (such as LFE)
    %% could generate guard expressions that can only be represented
    %% as a DAG (i.e. some nodes are referenced more than once). To
    %% handle DAGs, we must never remove a node from the forest, but
    %% just remove the {untaken,V} marker. That will effectively convert
    %% the DAG to a tree by duplicating the shared nodes and their
    %% descendants.

    case maps:find(V, Forest0) of
	{ok,{_,Expr}} ->
	    Forest = maps:remove({untaken,V}, Forest0),
	    {Expr,Forest};
	error ->
	    throw(not_possible)
    end;
forest_take_expr(_, _) ->
    throw(not_possible).

%% forest_peek_expr(Kvar, Forest) -> Kexpr | error.
%%  Return the expression corresponding to Kvar in Forest or
%%  return 'error' if there is a corresponding expression.

forest_peek_expr(#k_var{name=V}, Forest0) ->
    case maps:find(V, Forest0) of
	{ok,{_,Expr}} -> Expr;
	error -> error
    end.

%% forest_add_expr(Kexpr, Forest, St) -> {Kvar,Forest,St}.
%%  Add a new expression to Forest.

forest_add_expr(Expr, Forest0, St0) ->
    {#k_var{name=V}=Var,St} = new_var(St0),
    N = forest_next_index(Forest0),
    Forest = Forest0#{V => {N,Expr}},
    {Var,Forest,St}.

forest_next_index(Forest) ->
    1 + lists:max([N || {N,_} <- maps:values(Forest),
			is_integer(N)] ++ [0]).

%% forest_pre_seq([Kexpr], Forest) -> Kexpr.
%%  Package the list of Kexprs into a nested Kexpr, prepending all
%%  expressions in Forest that have not been taken out using
%%  forest_take_expr/2.

forest_pre_seq(Exprs, Forest) ->
    Es0 = [#k_var{name=V} || {untaken,V} <- maps:keys(Forest)],
    Es = Es0 ++ Exprs,
    Vs = extract_all_vars(Es, Forest, []),
    Pre0 = sort([{maps:get(V, Forest),V} || V <- Vs]),
    Pre = [#iset{vars=[#k_var{name=V}],arg=A} ||
	      {{_,A},V} <- Pre0],
    pre_seq(Pre++droplast(Exprs), last(Exprs)).

extract_all_vars(Es, Forest, Acc0) ->
    case extract_var_list(Es) of
	[] ->
	    Acc0;
	[_|_]=Vs0 ->
	    Vs = [V || V <- Vs0, maps:is_key(V, Forest)],
	    NewVs = ordsets:subtract(Vs, Acc0),
	    NewEs = [begin
		      {_,E} = maps:get(V, Forest),
		      E
		  end || V <- NewVs],
	    Acc = union(NewVs, Acc0),
	    extract_all_vars(NewEs, Forest, Acc)
    end.

extract_vars(#iset{arg=A,body=B}) ->
    union(extract_vars(A), extract_vars(B));
extract_vars(#k_bif{args=Args}) ->
    ordsets:from_list(lit_list_vars(Args));
extract_vars(#k_call{}) ->
    [];
extract_vars(#k_test{args=Args}) ->
    ordsets:from_list(lit_list_vars(Args));
extract_vars(#k_match{body=Body}) ->
    extract_vars(Body);
extract_vars(#k_alt{first=First,then=Then}) ->
    union(extract_vars(First), extract_vars(Then));
extract_vars(#k_guard{clauses=Cs}) ->
    extract_var_list(Cs);
extract_vars(#k_guard_clause{guard=G}) ->
    extract_vars(G);
extract_vars(#k_select{var=Var,types=Types}) ->
    union(ordsets:from_list(lit_vars(Var)),
	  extract_var_list(Types));
extract_vars(#k_type_clause{values=Values}) ->
    extract_var_list(Values);
extract_vars(#k_val_clause{body=Body}) ->
    extract_vars(Body);
extract_vars(#k_try{arg=Arg}) ->
    extract_vars(Arg);
extract_vars(Lit) ->
    ordsets:from_list(lit_vars(Lit)).

extract_var_list(L) ->
    union([extract_vars(E) || E <- L]).

%% Wrap the entire guard in a try/catch if needed.

wrap_guard(#c_try{}=Try, St) -> {Try,St};
wrap_guard(Core, St0) ->
    {VarName,St} = new_var_name(St0),
    Var = #c_var{name=VarName},
    Try = #c_try{arg=Core,vars=[Var],body=Var,evars=[],handler=#c_literal{val=false}},
    {Try,St}.
    
%% gexpr_test(Kexpr, State) -> {Kexpr,State}.
%%  Builds the final boolean test from the last Kexpr in a guard test.
%%  Must enter try blocks and isets and find the last Kexpr in them.
%%  This must end in a recognised BEAM test!

gexpr_test(#k_bif{anno=A,op=#k_remote{mod=#k_atom{val=erlang},
				      name=#k_atom{val=F},arity=Ar}=Op,
		  args=Kargs}=Ke, St) ->
    %% Either convert to test if ok, or add test.
    %% At this stage, erlang:float/1 is not a type test. (It should
    %% have been converted to erlang:is_float/1.)
    case erl_internal:new_type_test(F, Ar) orelse
	erl_internal:comp_op(F, Ar) of
	true -> {#k_test{anno=A,op=Op,args=Kargs},St};
	false -> gexpr_test_add(Ke, St)		%Add equality test
    end;
gexpr_test(#k_try{arg=B0,vars=[#k_var{name=X}],body=#k_var{name=X},
		  handler=#k_atom{val=false}}=Try, St0) ->
    {B,St} = gexpr_test(B0, St0),
    %%ok = io:fwrite("~w: ~p~n", [?LINE,{B0,B}]),
    {Try#k_try{arg=B},St};
gexpr_test(#iset{body=B0}=Iset, St0) ->
    {B1,St1} = gexpr_test(B0, St0),
    {Iset#iset{body=B1},St1};
gexpr_test(Ke, St) -> gexpr_test_add(Ke, St).	%Add equality test

gexpr_test_add(Ke, St0) ->
    Test = #k_remote{mod=#k_atom{val='erlang'},
		     name=#k_atom{val='=:='},
		     arity=2},
    {Ae,Ap,St1} = force_atomic(Ke, St0),
    {pre_seq(Ap, #k_test{anno=get_kanno(Ke),
			 op=Test,args=[Ae,#k_atom{val='true'}]}),St1}.

%% expr(Cexpr, Sub, State) -> {Kexpr,[PreKexpr],State}.
%%  Convert a Core expression, flattening it at the same time.

expr(#c_var{anno=A,name={_Name,Arity}}=Fname, Sub, St) ->
    %% A local in an expression.
    %% For now, these are wrapped into a fun by reverse
    %% eta-conversion, but really, there should be exactly one
    %% such "lambda function" for each escaping local name,
    %% instead of one for each occurrence as done now.
    Vs = [#c_var{name=list_to_atom("V" ++ integer_to_list(V))} ||
	     V <- integers(1, Arity)],
    Fun = #c_fun{anno=A,vars=Vs,body=#c_apply{anno=A,op=Fname,args=Vs}},
    expr(Fun, Sub, St);
expr(#c_var{anno=A,name=V}, Sub, St) ->
    {#k_var{anno=A,name=get_vsub(V, Sub)},[],St};
expr(#c_literal{anno=A,val=V}, _Sub, St) ->
    Klit = case V of
	       [] ->
		   #k_nil{anno=A};
	       V when is_integer(V) ->
		   #k_int{anno=A,val=V};
	       V when is_float(V) ->
		   #k_float{anno=A,val=V};
	       V when is_atom(V) ->
		   #k_atom{anno=A,val=V};
	       _ ->
		   #k_literal{anno=A,val=V}
	   end,
    {Klit,[],St};
expr(#c_cons{anno=A,hd=Ch,tl=Ct}, Sub, St0) ->
    %% Do cons in two steps, first the expressions left to right, then
    %% any remaining literals right to left.
    {Kh0,Hp0,St1} = expr(Ch, Sub, St0),
    {Kt0,Tp0,St2} = expr(Ct, Sub, St1),
    {Kt1,Tp1,St3} = force_atomic(Kt0, St2),
    {Kh1,Hp1,St4} = force_atomic(Kh0, St3),
    {#k_cons{anno=A,hd=Kh1,tl=Kt1},Hp0 ++ Tp0 ++ Tp1 ++ Hp1,St4};
expr(#c_tuple{anno=A,es=Ces}, Sub, St0) ->
    {Kes,Ep,St1} = atomic_list(Ces, Sub, St0),
    {#k_tuple{anno=A,es=Kes},Ep,St1};
expr(#c_map{anno=A,arg=Var,es=Ces}, Sub, St0) ->
    expr_map(A, Var, Ces, Sub, St0);
expr(#c_binary{anno=A,segments=Cv}, Sub, St0) ->
    try atomic_bin(Cv, Sub, St0) of
	{Kv,Ep,St1} ->
	    {#k_binary{anno=A,segs=Kv},Ep,St1}
    catch
	throw:bad_element_size ->
	    St1 = add_warning(get_line(A), bad_segment_size, A, St0),
	    Erl = #c_literal{val=erlang},
	    Name = #c_literal{val=error},
	    Args = [#c_literal{val=badarg}],
	    Error = #c_call{anno=A,module=Erl,name=Name,args=Args},
	    expr(Error, Sub, St1)
    end;
expr(#c_fun{anno=A,vars=Cvs,body=Cb}, Sub0, #kern{ff=OldFF,func=Func}=St0) ->
    FA = case OldFF of
	     undefined ->
		 Func;
	     _ ->
		 case lists:keyfind(id, 1, A) of
		     {id,{_,_,Name}} -> Name;
		     _ ->
			 case lists:keyfind(letrec_name, 1, A) of
			     {letrec_name,Name} -> Name;
			     _ -> unknown_fun
			 end
		 end
	 end,
    {Kvs,Sub1,St1} = pattern_list(Cvs, Sub0, St0#kern{ff=FA}),
    %%ok = io:fwrite("~w: ~p~n", [?LINE,{{Cvs,Sub0,St0},{Kvs,Sub1,St1}}]),
    {Kb,Pb,St2} = body(Cb, Sub1, St1#kern{ff=FA}),
    {#ifun{anno=A,vars=Kvs,body=pre_seq(Pb, Kb)},[],St2#kern{ff=OldFF}};
expr(#c_seq{arg=Ca,body=Cb}, Sub, St0) ->
    {Ka,Pa,St1} = body(Ca, Sub, St0),
    {Kb,Pb,St2} = body(Cb, Sub, St1),
    {Kb,Pa ++ [Ka] ++ Pb,St2};
expr(#c_let{anno=A,vars=Cvs,arg=Ca,body=Cb}, Sub0, St0) ->
    %%ok = io:fwrite("~w: ~p~n", [?LINE,{Cvs,Sub0,St0}]),
    {Ka,Pa,St1} = body(Ca, Sub0, St0),
    {Kps,Sub1,St2} = pattern_list(Cvs, Sub0, St1),
    %%ok = io:fwrite("~w: ~p~n", [?LINE,{Kps,Sub1,St1,St2}]),
    %% Break known multiple values into separate sets.
    Sets = case Ka of
	       #ivalues{args=Kas} ->
		   foldr2(fun (V, Val, Sb) ->
				  [#iset{vars=[V],arg=Val}|Sb] end,
			  [], Kps, Kas);
	       _Other ->
		   [#iset{anno=A,vars=Kps,arg=Ka}]
	   end,
    {Kb,Pb,St3} = body(Cb, Sub1, St2),
    {Kb,Pa ++ Sets ++ Pb,St3};
expr(#c_letrec{anno=A,defs=Cfs,body=Cb}, Sub0, St0) ->
    %% Make new function names and store substitution.
    {Fs0,{Sub1,St1}} =
	mapfoldl(fun ({#c_var{name={F,Ar}},B0}, {Sub,S0}) ->
			 {N,St1} = new_fun_name(atom_to_list(F)
						++ "/" ++
						integer_to_list(Ar),
						S0),
			 B = set_kanno(B0, [{letrec_name,N}]),
			 {{N,B},{set_fsub(F, Ar, N, Sub),St1}}
		 end, {Sub0,St0}, Cfs),
    %% Run translation on functions and body.
    {Fs1,St2} = mapfoldl(fun ({N,Fd0}, S1) ->
				 {Fd1,[],St2} = expr(Fd0, Sub1, S1#kern{ff=N}),
				 Fd = set_kanno(Fd1, A),
				 {{N,Fd},St2}
			 end, St1, Fs0),
    {Kb,Pb,St3} = body(Cb, Sub1, St2#kern{ff=St1#kern.ff}),
    {Kb,[#iletrec{anno=A,defs=Fs1}|Pb],St3};
expr(#c_case{arg=Ca,clauses=Ccs}, Sub, St0) ->
    {Ka,Pa,St1} = body(Ca, Sub, St0),		%This is a body!
    {Kvs,Pv,St2} = match_vars(Ka, St1),		%Must have variables here!
    {Km,St3} = kmatch(Kvs, Ccs, Sub, St2),
    Match = flatten_seq(build_match(Kvs, Km)),
    {last(Match),Pa ++ Pv ++ droplast(Match),St3};
expr(#c_receive{anno=A,clauses=Ccs0,timeout=Ce,action=Ca}, Sub, St0) ->
    {Ke,Pe,St1} = atomic(Ce, Sub, St0),		%Force this to be atomic!
    {Rvar,St2} = new_var(St1),
    %% Need to massage accept clauses and add reject clause before matching.
    Ccs1 = map(fun (#c_clause{anno=Banno,body=B0}=C) ->
		       B1 = #c_seq{arg=#ireceive_accept{anno=A},body=B0},
		       C#c_clause{anno=Banno,body=B1}
	       end, Ccs0),
    {Mpat,St3} = new_var_name(St2),
    Rc = #c_clause{anno=[compiler_generated|A],
		   pats=[#c_var{name=Mpat}],guard=#c_literal{anno=A,val=true},
		   body=#ireceive_next{anno=A}},
    {Km,St4} = kmatch([Rvar], Ccs1 ++ [Rc], Sub, add_var_def(Rvar, St3)),
    {Ka,Pa,St5} = body(Ca, Sub, St4),
    {#k_receive{anno=A,var=Rvar,body=Km,timeout=Ke,action=pre_seq(Pa, Ka)},
     Pe,St5};
expr(#c_apply{anno=A,op=Cop,args=Cargs}, Sub, St) ->
    c_apply(A, Cop, Cargs, Sub, St);
expr(#c_call{anno=A,module=#c_literal{val=erlang},name=#c_literal{val=is_record},
	     args=[_,Tag,Sz]=Args0}, Sub, St0) ->
    {Args,Ap,St} = atomic_list(Args0, Sub, St0),
    Remote = #k_remote{mod=#k_atom{val=erlang},name=#k_atom{val=is_record},arity=3},
    case {Tag,Sz} of
	{#c_literal{val=Atom},#c_literal{val=Int}}
	when is_atom(Atom), is_integer(Int) ->
	    %% Tag and size are literals. Make it a BIF, which will actually
	    %% be expanded out in a later pass.
	    {#k_bif{anno=A,op=Remote,args=Args},Ap,St};
	{_,_} ->
	    %% (Only in bodies.) Make it into an actual call to the BIF.
	    {#k_call{anno=A,op=Remote,args=Args},Ap,St}
    end;
expr(#c_call{anno=A,module=M0,name=F0,args=Cargs}, Sub, St0) ->
    Ar = length(Cargs),
    {Type,St1} = case call_type(M0, F0, Ar) of
		     error ->
			 %% Invalid call (e.g. M:42/3). Issue a warning,
			 %% and let the generated code use the old explict apply.
			 {old_apply,add_warning(get_line(A), bad_call, A, St0)};
		     Type0 ->
			 {Type0,St0}
		 end,

    case Type of
	old_apply ->
	    Call = #c_call{anno=A,
			   module=#c_literal{val=erlang},
			   name=#c_literal{val=apply},
			   args=[M0,F0,cerl:make_list(Cargs)]},
	    expr(Call, Sub, St1);
	_ ->
	    {[M1,F1|Kargs],Ap,St} = atomic_list([M0,F0|Cargs], Sub, St1),
	    Call = case Type of
		       bif ->
			   #k_bif{anno=A,op=#k_remote{mod=M1,name=F1,arity=Ar},
				  args=Kargs};
		       call ->
			   #k_call{anno=A,op=#k_remote{mod=M1,name=F1,arity=Ar},
				   args=Kargs};
		       apply ->
			   #k_call{anno=A,op=#k_remote{mod=M1,name=F1,arity=Ar},
				   args=Kargs}
		   end,
	    {Call,Ap,St}
    end;
expr(#c_primop{anno=A,name=#c_literal{val=match_fail},args=Cargs0}, Sub, St0) ->
    Cargs = translate_match_fail(Cargs0, Sub, A, St0),
    {Kargs,Ap,St} = atomic_list(Cargs, Sub, St0),
    Ar = length(Cargs),
    Call = #k_call{anno=A,op=#k_remote{mod=#k_atom{val=erlang},
				       name=#k_atom{val=error},
				       arity=Ar},args=Kargs},
    {Call,Ap,St};
expr(#c_primop{anno=A,name=#c_literal{val=N},args=Cargs}, Sub, St0) ->
    {Kargs,Ap,St1} = atomic_list(Cargs, Sub, St0),
    Ar = length(Cargs),
    {#k_bif{anno=A,op=#k_internal{name=N,arity=Ar},args=Kargs},Ap,St1};
expr(#c_try{anno=A,arg=Ca,vars=Cvs,body=Cb,evars=Evs,handler=Ch}, Sub0, St0) ->
    %% The normal try expression. The body and exception handler
    %% variables behave as let variables.
    {Ka,Pa,St1} = body(Ca, Sub0, St0),
    {Kcvs,Sub1,St2} = pattern_list(Cvs, Sub0, St1),
    {Kb,Pb,St3} = body(Cb, Sub1, St2),
    {Kevs,Sub2,St4} = pattern_list(Evs, Sub0, St3),
    {Kh,Ph,St5} = body(Ch, Sub2, St4),
    {#k_try{anno=A,arg=pre_seq(Pa, Ka),
	    vars=Kcvs,body=pre_seq(Pb, Kb),
	    evars=Kevs,handler=pre_seq(Ph, Kh)},[],St5};
expr(#c_catch{anno=A,body=Cb}, Sub, St0) ->
    {Kb,Pb,St1} = body(Cb, Sub, St0),
    {#k_catch{anno=A,body=pre_seq(Pb, Kb)},[],St1};
%% Handle internal expressions.
expr(#ireceive_accept{anno=A}, _Sub, St) -> {#k_receive_accept{anno=A},[],St}.

%% Translate a function_clause exception to a case_clause exception if
%% it has been moved into another function. (A function_clause exception
%% will not work correctly if it is moved into another function, or
%% even if it is invoked not from the top level in the correct function.)
translate_match_fail(Args, Sub, Anno, St) ->
    case Args of
	[#c_tuple{es=[#c_literal{val=function_clause}|As]}] ->
	    translate_match_fail_1(Anno, As, Sub, St);
	[#c_literal{val=Tuple}] when is_tuple(Tuple) ->
	    %% The inliner may have created a literal out of
	    %% the original #c_tuple{}.
	    case tuple_to_list(Tuple) of
		[function_clause|As0] ->
		    As = [#c_literal{val=E} || E <- As0],
		    translate_match_fail_1(Anno, As, Sub, St);
		_ ->
		    Args
	    end;
	_ ->
	    %% Not a function_clause exception.
	    Args
    end.

translate_match_fail_1(Anno, As, Sub, #kern{ff=FF}) ->
    AnnoFunc = case keyfind(function_name, 1, Anno) of
		   false ->
		       none;			%Force rewrite.
		   {function_name,{Name,Arity}} ->
		       {get_fsub(Name, Arity, Sub),Arity}
	       end,
    case {AnnoFunc,FF} of
	{Same,Same} ->
	    %% Still in the correct function.
	    translate_fc(As);
	{{F,_},F} ->
	    %% Still in the correct function.
	    translate_fc(As);
	_ ->
	    %% Wrong function or no function_name annotation.
	    %%
	    %% The inliner has copied the match_fail(function_clause)
	    %% primop from another function (or from another instance of
	    %% the current function). match_fail(function_clause) will
	    %% only work at the top level of the function it was originally
	    %% defined in, so we will need to rewrite it to a case_clause.
	    [c_tuple([#c_literal{val=case_clause},c_tuple(As)])]
    end.

translate_fc(Args) ->
    [#c_literal{val=function_clause},cerl:make_list(Args)].

expr_map(A,Var0,Ces,Sub,St0) ->
    {Var,Mps,St1} = expr(Var0, Sub, St0),
    {Km,Eps,St2} = map_split_pairs(A, Var, Ces, Sub, St1),
    {Km,Eps++Mps,St2}.

map_split_pairs(A, Var, Ces, Sub, St0) ->
    %% 1. Force variables.
    %% 2. Group adjacent pairs with literal keys.
    %% 3. Within each such group, remove multiple assignments to the same key.
    %% 4. Partition each group according to operator ('=>' and ':=').
    Pairs0 = [{Op,K,V} ||
		 #c_map_pair{op=#c_literal{val=Op},key=K,val=V} <- Ces],
    {Pairs,Esp,St1} = foldr(fun
	    ({Op,K0,V0}, {Ops,Espi,Sti0}) when Op =:= assoc; Op =:= exact ->
		{K,Eps1,Sti1} = atomic(K0, Sub, Sti0),
		{V,Eps2,Sti2} = atomic(V0, Sub, Sti1),
		{[{Op,K,V}|Ops],Eps1 ++ Eps2 ++ Espi,Sti2}
	end, {[],[],St0}, Pairs0),
    map_split_pairs_1(A, Var, Pairs, Esp, St1).

map_split_pairs_1(A, Map0, [{Op,Key,Val}|Pairs1]=Pairs0, Esp0, St0) ->
    {Map1,Em,St1} = force_atomic(Map0, St0),
    case Key of
	#k_var{} ->
	    %% Don't combine variable keys with other keys.
	    Kes = [#k_map_pair{key=Key,val=Val}],
	    Map = #k_map{anno=A,op=Op,var=Map1,es=Kes},
	    map_split_pairs_1(A, Map, Pairs1, Esp0 ++ Em, St1);
	_ ->
	    %% Literal key. Split off all literal keys.
	    {L,Pairs} = splitwith(fun({_,#k_var{},_}) -> false;
				     ({_,_,_}) -> true
				  end, Pairs0),
	    {Map,Esp,St2} = map_group_pairs(A, Map1, L, Esp0 ++ Em, St1),
	    map_split_pairs_1(A, Map, Pairs, Esp, St2)
    end;
map_split_pairs_1(_, Map, [], Esp, St0) ->
    {Map,Esp,St0}.

map_group_pairs(A, Var, Pairs0, Esp, St0) ->
    Pairs = map_remove_dup_keys(Pairs0),
    Assoc = [#k_map_pair{key=K,val=V} || {_,{assoc,K,V}} <- Pairs],
    Exact = [#k_map_pair{key=K,val=V} || {_,{exact,K,V}} <- Pairs],
    case {Assoc,Exact} of
	{[_|_],[]} ->
	    {#k_map{anno=A,op=assoc,var=Var,es=Assoc},Esp,St0};
	{[],[_|_]} ->
	    {#k_map{anno=A,op=exact,var=Var,es=Exact},Esp,St0};
	{[_|_],[_|_]} ->
	    Map = #k_map{anno=A,op=assoc,var=Var,es=Assoc},
	    {Mvar,Em,St1} = force_atomic(Map, St0),
	    {#k_map{anno=A,op=exact,var=Mvar,es=Exact},Esp ++ Em,St1}
    end.

map_remove_dup_keys(Es) ->
    dict:to_list(map_remove_dup_keys(Es, dict:new())).

map_remove_dup_keys([{assoc,K0,V}|Es0],Used0) ->
    K = map_key_clean(K0),
    Op = case dict:find(K, Used0) of
	     {ok,{exact,_,_}} -> exact;
	     _                -> assoc
	 end,
    Used1 = dict:store(K, {Op,K0,V}, Used0),
    map_remove_dup_keys(Es0, Used1);
map_remove_dup_keys([{exact,K0,V}|Es0],Used0) ->
    K = map_key_clean(K0),
    Op = case dict:find(K, Used0) of
	     {ok,{assoc,_,_}} -> assoc;
	     _                -> exact
	 end,
    Used1 = dict:store(K, {Op,K0,V}, Used0),
    map_remove_dup_keys(Es0, Used1);
map_remove_dup_keys([], Used) -> Used.

%% Be explicit instead of using set_kanno(K, []).
map_key_clean(#k_var{name=V})    -> {var,V};
map_key_clean(#k_literal{val=V}) -> {lit,V};
map_key_clean(#k_int{val=V})     -> {lit,V};
map_key_clean(#k_float{val=V})   -> {lit,V};
map_key_clean(#k_atom{val=V})    -> {lit,V};
map_key_clean(#k_nil{})          -> {lit,[]}.


%% call_type(Module, Function, Arity) -> call | bif | apply | error.
%%  Classify the call.
call_type(#c_literal{val=M}, #c_literal{val=F}, Ar) when is_atom(M), is_atom(F) ->
    case is_remote_bif(M, F, Ar) of
	false -> call;
	true -> bif
    end;
call_type(#c_var{}, #c_literal{val=A}, _) when is_atom(A) -> apply;
call_type(#c_literal{val=A}, #c_var{}, _) when is_atom(A) -> apply;
call_type(#c_var{}, #c_var{}, _) -> apply;
call_type(_, _, _) -> error.

%% match_vars(Kexpr, State) -> {[Kvar],[PreKexpr],State}.
%%  Force return from body into a list of variables.

match_vars(#ivalues{args=As}, St) ->
    foldr(fun (Ka, {Vs,Vsp,St0}) ->
		  {V,Vp,St1} = force_variable(Ka, St0),
		  {[V|Vs],Vp ++ Vsp,St1}
	  end, {[],[],St}, As);
match_vars(Ka, St0) ->
    {V,Vp,St1} = force_variable(Ka, St0),
    {[V],Vp,St1}.

%% c_apply(A, Op, [Carg], Sub, State) -> {Kexpr,[PreKexpr],State}.
%%  Transform application, detect which are guaranteed to be bifs.

c_apply(A, #c_var{anno=Ra,name={F0,Ar}}, Cargs, Sub, St0) ->
    {Kargs,Ap,St1} = atomic_list(Cargs, Sub, St0),
    F1 = get_fsub(F0, Ar, Sub),			%Has it been rewritten
    {#k_call{anno=A,op=#k_local{anno=Ra,name=F1,arity=Ar},args=Kargs},
     Ap,St1};
c_apply(A, Cop, Cargs, Sub, St0) ->
    {Kop,Op,St1} = variable(Cop, Sub, St0),
    {Kargs,Ap,St2} = atomic_list(Cargs, Sub, St1),
    {#k_call{anno=A,op=Kop,args=Kargs},Op ++ Ap,St2}.

flatten_seq(#iset{anno=A,vars=Vs,arg=Arg,body=B}) ->
    [#iset{anno=A,vars=Vs,arg=Arg}|flatten_seq(B)];
flatten_seq(Ke) -> [Ke].

pre_seq([#iset{anno=A,vars=Vs,arg=Arg,body=B}|Ps], K) ->
    B = undefined,				%Assertion.
    #iset{anno=A,vars=Vs,arg=Arg,body=pre_seq(Ps, K)};
pre_seq([P|Ps], K) ->
    #iset{vars=[],arg=P,body=pre_seq(Ps, K)};
pre_seq([], K) -> K.

%% atomic(Cexpr, Sub, State) -> {Katomic,[PreKexpr],State}.
%%  Convert a Core expression making sure the result is an atomic
%%  literal.

atomic(Ce, Sub, St0) ->
    {Ke,Kp,St1} = expr(Ce, Sub, St0),
    {Ka,Ap,St2} = force_atomic(Ke, St1),
    {Ka,Kp ++ Ap,St2}.

force_atomic(Ke, St0) ->
    case is_atomic(Ke) of
	true -> {Ke,[],St0}; 
	false ->
	    {V,St1} = new_var(St0),
	    {V,[#iset{vars=[V],arg=Ke}],St1}
    end.

% force_atomic_list(Kes, St) ->
%     foldr(fun (Ka, {As,Asp,St0}) ->
% 		  {A,Ap,St1} = force_atomic(Ka, St0),
% 		  {[A|As],Ap ++ Asp,St1}
% 	  end, {[],[],St}, Kes).

atomic_bin([#c_bitstr{anno=A,val=E0,size=S0,unit=U0,type=T,flags=Fs0}|Es0],
	   Sub, St0) ->
    {E,Ap1,St1} = atomic(E0, Sub, St0),
    {S1,Ap2,St2} = atomic(S0, Sub, St1),
    validate_bin_element_size(S1),
    U1 = cerl:concrete(U0),
    Fs1 = cerl:concrete(Fs0),
    {Es,Ap3,St3} = atomic_bin(Es0, Sub, St2),
    {#k_bin_seg{anno=A,size=S1,
		unit=U1,
		type=cerl:concrete(T),
		flags=Fs1,
		seg=E,next=Es},
     Ap1++Ap2++Ap3,St3};
atomic_bin([], _Sub, St) -> {#k_bin_end{},[],St}.

validate_bin_element_size(#k_var{}) -> ok;
validate_bin_element_size(#k_int{val=V}) when V >= 0 -> ok;
validate_bin_element_size(#k_atom{val=all}) -> ok;
validate_bin_element_size(#k_atom{val=undefined}) -> ok;
validate_bin_element_size(_) -> throw(bad_element_size).
    
%% atomic_list([Cexpr], Sub, State) -> {[Kexpr],[PreKexpr],State}.

atomic_list(Ces, Sub, St) ->
    foldr(fun (Ce, {Kes,Esp,St0}) ->
		  {Ke,Ep,St1} = atomic(Ce, Sub, St0),
		  {[Ke|Kes],Ep ++ Esp,St1}
	  end, {[],[],St}, Ces).

%% is_atomic(Kexpr) -> boolean().
%%  Is a Kexpr atomic?  Strings are NOT considered atomic!

is_atomic(#k_literal{}) -> true;
is_atomic(#k_int{}) -> true;
is_atomic(#k_float{}) -> true;
is_atomic(#k_atom{}) -> true;
%%is_atomic(#k_char{}) -> true;			%No characters
is_atomic(#k_nil{}) -> true;
is_atomic(#k_var{}) -> true;
is_atomic(_) -> false.

%% variable(Cexpr, Sub, State) -> {Kvar,[PreKexpr],State}.
%%  Convert a Core expression making sure the result is a variable.

variable(Ce, Sub, St0) ->
    {Ke,Kp,St1} = expr(Ce, Sub, St0),
    {Kv,Vp,St2} = force_variable(Ke, St1),
    {Kv,Kp ++ Vp,St2}.

force_variable(#k_var{}=Ke, St) -> {Ke,[],St};
force_variable(Ke, St0) ->
    {V,St1} = new_var(St0),
    {V,[#iset{vars=[V],arg=Ke}],St1}.

%% pattern(Cpat, Isub, Osub, State) -> {Kpat,Sub,State}.
%%  Convert patterns.  Variables shadow so rename variables that are
%%  already defined.
%%
%%  Patterns are complicated by sizes in binaries.  These are pure
%%  input variables which create no bindings.  We, therefore, need to
%%  carry around the original substitutions to get the correct
%%  handling.

pattern(#c_var{anno=A,name=V}, _Isub, Osub, St0) ->
    case cerl_sets:is_element(V, St0#kern.ds) of
	true ->
	    {New,St1} = new_var_name(St0),
	    {#k_var{anno=A,name=New},
	     set_vsub(V, New, Osub),
	     St1#kern{ds=cerl_sets:add_element(New, St1#kern.ds)}};
	false ->
	    {#k_var{anno=A,name=V},Osub,
	     St0#kern{ds=cerl_sets:add_element(V, St0#kern.ds)}}
    end;
pattern(#c_literal{anno=A,val=Val}, _Isub, Osub, St) ->
    {#k_literal{anno=A,val=Val},Osub,St};
pattern(#c_cons{anno=A,hd=Ch,tl=Ct}, Isub, Osub0, St0) ->
    {Kh,Osub1,St1} = pattern(Ch, Isub, Osub0, St0),
    {Kt,Osub2,St2} = pattern(Ct, Isub, Osub1, St1),
    {#k_cons{anno=A,hd=Kh,tl=Kt},Osub2,St2};
pattern(#c_tuple{anno=A,es=Ces}, Isub, Osub0, St0) ->
    {Kes,Osub1,St1} = pattern_list(Ces, Isub, Osub0, St0),
    {#k_tuple{anno=A,es=Kes},Osub1,St1};
pattern(#c_map{anno=A,es=Ces}, Isub, Osub0, St0) ->
    {Kes,Osub1,St1} = pattern_map_pairs(Ces, Isub, Osub0, St0),
    {#k_map{anno=A,op=exact,es=Kes},Osub1,St1};
pattern(#c_binary{anno=A,segments=Cv}, Isub, Osub0, St0) ->
    {Kv,Osub1,St1} = pattern_bin(Cv, Isub, Osub0, St0),
    {#k_binary{anno=A,segs=Kv},Osub1,St1};
pattern(#c_alias{anno=A,var=Cv,pat=Cp}, Isub, Osub0, St0) ->
    {Cvs,Cpat} = flatten_alias(Cp),
    {Kvs,Osub1,St1} = pattern_list([Cv|Cvs], Isub, Osub0, St0),
    {Kpat,Osub2,St2} = pattern(Cpat, Isub, Osub1, St1),
    {#ialias{anno=A,vars=Kvs,pat=Kpat},Osub2,St2}.

flatten_alias(#c_alias{var=V,pat=P}) ->
    {Vs,Pat} = flatten_alias(P),
    {[V|Vs],Pat};
flatten_alias(Pat) -> {[],Pat}.

pattern_map_pairs(Ces0, Isub, Osub0, St0) ->
    %% pattern the pair keys and values as normal
    {Kes,{Osub1,St1}} = lists:mapfoldl(fun
	    (#c_map_pair{anno=A,key=Ck,val=Cv},{Osubi0,Sti0}) ->
		{Kk,[],Sti1} = expr(Ck, Isub, Sti0),
		{Kv,Osubi2,Sti2} = pattern(Cv, Isub, Osubi0, Sti1),
		{#k_map_pair{anno=A,key=Kk,val=Kv},{Osubi2,Sti2}}
	end, {Osub0, St0}, Ces0),
    %% It is later assumed that these keys are term sorted
    %% so we need to sort them here
    Kes1 = lists:sort(fun
	    (#k_map_pair{key=KkA},#k_map_pair{key=KkB}) ->
		A = map_key_clean(KkA),
		B = map_key_clean(KkB),
		erts_internal:cmp_term(A,B) < 0
	end, Kes),
    {Kes1,Osub1,St1}.

pattern_bin(Es, Isub, Osub0, St0) ->
    {Kbin,{_,Osub},St} = pattern_bin_1(Es, Isub, Osub0, St0),
    {Kbin,Osub,St}.

pattern_bin_1([#c_bitstr{anno=A,val=E0,size=S0,unit=U,type=T,flags=Fs}|Es0], 
	    Isub0, Osub0, St0) ->
    {S1,[],St1} = expr(S0, Isub0, St0),
    S = case S1 of
	    #k_int{} -> S1;
	    #k_var{} -> S1;
	    #k_atom{} -> S1;
	    _ ->
		%% Bad size (coming from an optimization or Core Erlang
		%% source code) - replace it with a known atom because
		%% a literal or bit syntax construction can cause further
		%% problems.
		#k_atom{val=bad_size}
	end,
    U0 = cerl:concrete(U),
    Fs0 = cerl:concrete(Fs),
    %%ok= io:fwrite("~w: ~p~n", [?LINE,{B0,S,U0,Fs0}]),
    {E,Osub1,St2} = pattern(E0, Isub0, Osub0, St1),
    Isub1 = case E0 of
		#c_var{name=V} ->
		    set_vsub(V, E#k_var.name, Isub0);
		_ -> Isub0
	    end,
    {Es,{Isub,Osub},St3} = pattern_bin_1(Es0, Isub1, Osub1, St2),
    {#k_bin_seg{anno=A,size=S,
		unit=U0,
		type=cerl:concrete(T),
		flags=Fs0,
		seg=E,next=Es},
     {Isub,Osub},St3};
pattern_bin_1([], Isub, Osub, St) -> {#k_bin_end{},{Isub,Osub},St}.

%% pattern_list([Cexpr], Sub, State) -> {[Kexpr],Sub,State}.

pattern_list(Ces, Sub, St) ->
    pattern_list(Ces, Sub, Sub, St).

pattern_list(Ces, Isub, Osub, St) ->
    foldr(fun (Ce, {Kes,Osub0,St0}) ->
		  {Ke,Osub1,St1} = pattern(Ce, Isub, Osub0, St0),
		  {[Ke|Kes],Osub1,St1}
	  end, {[],Osub,St}, Ces).

%% new_sub() -> Subs.
%% set_vsub(Name, Sub, Subs) -> Subs.
%% subst_vsub(Name, Sub, Subs) -> Subs.
%% get_vsub(Name, Subs) -> SubName.
%%  Add/get substitute Sub for Name to VarSub.  Use orddict so we know
%%  the format is a list {Name,Sub} pairs.  When adding a new
%%  substitute we fold substitute chains so we never have to search
%%  more than once.

new_sub() -> orddict:new().

get_vsub(V, Vsub) ->
    case orddict:find(V, Vsub) of
	{ok,Val} -> Val;
	error -> V
    end.

set_vsub(V, S, Vsub) ->
    orddict:store(V, S, Vsub).

subst_vsub(Key, New, [{K,Key}|Dict]) ->
    %% Fold chained substitution.
    [{K,New}|subst_vsub(Key, New, Dict)];
subst_vsub(Key, New, [{K,_}|_]=Dict) when Key < K ->
    %% Insert the new substitution here, and continue
    %% look for chained substitutions.
    [{Key,New}|subst_vsub_1(Key, New, Dict)];
subst_vsub(Key, New, [{K,_}=E|Dict]) when Key > K ->
    [E|subst_vsub(Key, New, Dict)];
subst_vsub(Key, New, []) -> [{Key,New}].

subst_vsub_1(V, S, [{K,V}|Dict]) ->
    %% Fold chained substitution.
    [{K,S}|subst_vsub_1(V, S, Dict)];
subst_vsub_1(V, S, [E|Dict]) ->
    [E|subst_vsub_1(V, S, Dict)];
subst_vsub_1(_, _, []) -> [].

get_fsub(F, A, Fsub) ->
    case orddict:find({F,A}, Fsub) of
	{ok,Val} -> Val;
	error -> F
    end.

set_fsub(F, A, S, Fsub) ->
    orddict:store({F,A}, S, Fsub).

new_fun_name(St) ->
    new_fun_name("anonymous", St).

%% new_fun_name(Type, State) -> {FunName,State}.

new_fun_name(Type, #kern{func={F,Arity},fcount=C}=St) ->
    Name = "-" ++ atom_to_list(F) ++ "/" ++ integer_to_list(Arity) ++
	"-" ++ Type ++ "-" ++ integer_to_list(C) ++ "-",
    {list_to_atom(Name),St#kern{fcount=C+1}}.

%% new_var_name(State) -> {VarName,State}.

new_var_name(#kern{vcount=C}=St) ->
    {list_to_atom("@k" ++ integer_to_list(C)),St#kern{vcount=C+1}}.

%% new_var(State) -> {#k_var{},State}.

new_var(St0) ->
    {New,St1} = new_var_name(St0),
    {#k_var{name=New},St1}.

%% new_vars(Count, State) -> {[#k_var{}],State}.
%%  Make Count new variables.

new_vars(N, St) -> new_vars(N, St, []).

new_vars(N, St0, Vs) when N > 0 ->
    {V,St1} = new_var(St0),
    new_vars(N-1, St1, [V|Vs]);
new_vars(0, St, Vs) -> {Vs,St}.

make_vars(Vs) -> [ #k_var{name=V} || V <- Vs ].

add_var_def(V, St) ->
    St#kern{ds=cerl_sets:add_element(V#k_var.name, St#kern.ds)}.

%%add_vars_def(Vs, St) ->
%%    Ds = foldl(fun (#k_var{name=V}, Ds) -> add_element(V, Ds) end,
%%	       St#kern.ds, Vs),
%%    St#kern{ds=Ds}.

%% is_remote_bif(Mod, Name, Arity) -> true | false.
%%  Test if function is really a BIF.

is_remote_bif(erlang, get, 1) -> true;
is_remote_bif(erlang, N, A) ->
    case erl_internal:guard_bif(N, A) of
	true -> true;
	false ->
	    try erl_internal:op_type(N, A) of
		arith -> true;
		bool -> true;
		comp -> true;
		list -> false;
		send -> false
	    catch
		_:_ -> false		% not an op
	    end
    end;
is_remote_bif(_, _, _) -> false.

%% bif_vals(Name, Arity) -> integer().
%% bif_vals(Mod, Name, Arity) -> integer().
%%  Determine how many return values a BIF has.  Provision for BIFs to
%%  return multiple values.  Only used in bodies where a BIF may be
%%  called for effect only.

bif_vals(dsetelement, 3) -> 0;
bif_vals(bs_context_to_binary, 1) -> 0;
bif_vals(_, _) -> 1.

bif_vals(_, _, _) -> 1.

%% foldr2(Fun, Acc, List1, List2) -> Acc.
%%  Fold over two lists.

foldr2(Fun, Acc0, [E1|L1], [E2|L2]) ->
    Acc1 = Fun(E1, E2, Acc0),
    foldr2(Fun, Acc1, L1, L2);
foldr2(_, Acc, [], []) -> Acc.

%% This code implements the algorithm for an optimizing compiler for
%% pattern matching given "The Implementation of Functional
%% Programming Languages" by Simon Peyton Jones. The code is much
%% longer as the meaning of constructors is different from the book.
%%
%% In Erlang many constructors can have different values, e.g. 'atom'
%% or 'integer', whereas in the original algorithm thse would be
%% different constructors. Our view makes it easier in later passes to
%% handle indexing over each type.
%%
%% Patterns are complicated by having alias variables.  The form of a
%% pattern is Pat | {alias,Pat,[AliasVar]}.  This is hidden by access
%% functions to pattern arguments but the code must be aware of it.
%%
%% The compilation proceeds in two steps:
%%
%% 1. The patterns in the clauses to converted to lists of kernel
%% patterns.  The Core clause is now hybrid, this is easier to work
%% with.  Remove clauses with trivially false guards, this simplifies
%% later passes.  Add locally defined vars and variable subs to each
%% clause for later use.
%%
%% 2. The pattern matching is optimised.  Variable substitutions are
%% added to the VarSub structure and new variables are made visible.
%% The guard and body are then converted to Kernel form.

%% kmatch([Var], [Clause], Sub, State) -> {Kexpr,State}.

kmatch(Us, Ccs, Sub, St0) ->
    {Cs,St1} = match_pre(Ccs, Sub, St0),	%Convert clauses
    Def = fail,
%%     Def = #k_call{anno=[compiler_generated],
%% 		  op=#k_remote{mod=#k_atom{val=erlang},
%%  			       name=#k_atom{val=exit},
%%  			       arity=1},
%%  		  args=[#k_atom{val=kernel_match_error}]},
    match(Us, Cs, Def, St1).		%Do the match.

%% match_pre([Cclause], Sub, State) -> {[Clause],State}.
%%  Must be careful not to generate new substitutions here now!
%%  Remove clauses with trivially false guards which will never
%%  succeed.

match_pre(Cs, Sub0, St) ->
    foldr(fun (#c_clause{anno=A,pats=Ps,guard=G,body=B}, {Cs0,St0}) ->
		  {Kps,Osub1,St1} = pattern_list(Ps, Sub0, St0),
		  {[#iclause{anno=A,isub=Sub0,osub=Osub1,
			     pats=Kps,guard=G,body=B}|
		    Cs0],St1}
	  end, {[],St}, Cs).

%% match([Var], [Clause], Default, State) -> {MatchExpr,State}.

match([_U|_Us] = L, Cs, Def, St0) ->
    %%ok = io:format("match ~p~n", [Cs]),
    Pcss = partition(Cs),
    foldr(fun (Pcs, {D,St}) -> match_varcon(L, Pcs, D, St) end,
	  {Def,St0}, Pcss);
match([], Cs, Def, St) ->
    match_guard(Cs, Def, St).

%% match_guard([Clause], Default, State) -> {IfExpr,State}.
%%  Build a guard to handle guards. A guard *ALWAYS* fails if no
%%  clause matches, there will be a surrounding 'alt' to catch the
%%  failure.  Drop redundant cases, i.e. those after a true guard.

match_guard(Cs0, Def0, St0) ->
    {Cs1,Def1,St1} = match_guard_1(Cs0, Def0, St0),
    {build_alt(build_guard(Cs1), Def1),St1}.

match_guard_1([#iclause{anno=A,osub=Osub,guard=G,body=B}|Cs0], Def0, St0) ->
    case is_true_guard(G) of
	true ->
	    %% The true clause body becomes the default.
	    {Kb,Pb,St1} = body(B, Osub, St0),
	    St2 = maybe_add_warning(Cs0, A, St1),
	    St = maybe_add_warning(Def0, A, St2),
	    {[],pre_seq(Pb, Kb),St};
	false ->
	    {Kg,St1} = guard(G, Osub, St0),
	    {Kb,Pb,St2} = body(B, Osub, St1),
	    {Cs1,Def1,St3} = match_guard_1(Cs0, Def0, St2),
	    {[#k_guard_clause{guard=Kg,body=pre_seq(Pb, Kb)}|Cs1],
	     Def1,St3}
    end;
match_guard_1([], Def, St) -> {[],Def,St}. 

maybe_add_warning([C|_], MatchAnno, St) ->
    maybe_add_warning(C, MatchAnno, St);
maybe_add_warning([], _MatchAnno, St) -> St;
maybe_add_warning(fail, _MatchAnno, St) -> St;
maybe_add_warning(Ke, MatchAnno, St) ->
    case is_compiler_generated(Ke) of
	true ->
	    St;
	false ->
	    Anno = get_kanno(Ke),
	    Line = get_line(Anno),
	    MatchLine = get_line(MatchAnno),
	    Warn = case MatchLine of
		       none -> nomatch_shadow;
		       _ -> {nomatch_shadow,MatchLine}
		   end,
	    add_warning(Line, Warn, Anno, St)
    end.
    
get_line([Line|_]) when is_integer(Line) -> Line;
get_line([_|T]) -> get_line(T);
get_line([]) -> none.
    
get_file([{file,File}|_]) -> File;
get_file([_|T]) -> get_file(T);
get_file([]) -> "no_file". % should not happen

%% is_true_guard(Guard) -> boolean().
%%  Test if a guard is trivially true.

is_true_guard(#c_literal{val=true}) -> true;
is_true_guard(_) -> false.

%% partition([Clause]) -> [[Clause]].
%%  Partition a list of clauses into groups which either contain
%%  clauses with a variable first argument, or with a "constructor".

partition([C1|Cs]) ->
    V1 = is_var_clause(C1),
    {More,Rest} = splitwith(fun (C) -> is_var_clause(C) =:= V1 end, Cs),
    [[C1|More]|partition(Rest)];
partition([]) -> [].

%% match_varcon([Var], [Clause], Def, [Var], Sub, State) ->
%%        {MatchExpr,State}.

match_varcon(Us, [C|_]=Cs, Def, St) ->
    case is_var_clause(C) of
	true -> match_var(Us, Cs, Def, St);
	false -> match_con(Us, Cs, Def, St)
    end.

%% match_var([Var], [Clause], Def, State) -> {MatchExpr,State}.
%%  Build a call to "select" from a list of clauses all containing a
%%  variable as the first argument.  We must rename the variable in
%%  each clause to be the match variable as these clause will share
%%  this variable and may have different names for it.  Rename aliases
%%  as well.

match_var([U|Us], Cs0, Def, St) ->
    Cs1 = map(fun (#iclause{isub=Isub0,osub=Osub0,pats=[Arg|As]}=C) ->
		      Vs = [arg_arg(Arg)|arg_alias(Arg)],
 		      Osub1 = foldl(fun (#k_var{name=V}, Acc) ->
 					   subst_vsub(V, U#k_var.name, Acc)
 				   end, Osub0, Vs),
 		      Isub1 = foldl(fun (#k_var{name=V}, Acc) ->
					    subst_vsub(V, U#k_var.name, Acc)
				    end, Isub0, Vs),
		      C#iclause{isub=Isub1,osub=Osub1,pats=As}
	      end, Cs0),
    match(Us, Cs1, Def, St).

%% match_con(Variables, [Clause], Default, State) -> {SelectExpr,State}.
%%  Build call to "select" from a list of clauses all containing a
%%  constructor/constant as first argument.  Group the constructors
%%  according to type, the order is really irrelevant but tries to be
%%  smart.

match_con(Us, [C], Def, St) ->
    %% There is only one clause. We can keep literal tuples and
    %% lists, but we must convert []/integer/float/atom literals
    %% to the proper record (#k_nil{} and so on).
    Cs = [expand_pat_lit_clause(C, false)],
    match_con_1(Us, Cs, Def, St);
match_con(Us, Cs0, Def, St) ->
    %% More than one clause. Remove literals at the top level.
    Cs = [expand_pat_lit_clause(C, true) || C <- Cs0],
    match_con_1(Us, Cs, Def, St).

match_con_1([U|_Us] = L, Cs, Def, St0) ->
    %% Extract clauses for different constructors (types).
    %%ok = io:format("match_con ~p~n", [Cs]),
    Ttcs = select_types([k_binary], Cs) ++ select_bin_con(Cs) ++
	select_types([k_cons,k_tuple,k_map,k_atom,k_float,k_int,
		      k_nil,k_literal], Cs),
    %%ok = io:format("ttcs = ~p~n", [Ttcs]),
    {Scs,St1} =
	mapfoldl(fun ({T,Tcs}, St) ->
			 {[S|_]=Sc,S1} = match_value(L, T, Tcs, fail, St),
			 %%ok = io:format("match_con type2 ~p~n", [T]),
			 Anno = get_kanno(S),
			 {#k_type_clause{anno=Anno,type=T,values=Sc},S1} end,
		 St0, Ttcs),
    {build_alt_1st_no_fail(build_select(U, Scs), Def),St1}.

select_types(Types, Cs) ->
    [{T,Tcs} || T <- Types, begin Tcs = select(T, Cs), Tcs =/= [] end].
    
expand_pat_lit_clause(#iclause{pats=[#ialias{pat=#k_literal{anno=A,val=Val}}=Alias|Ps]}=C, B) ->
    P = case B of
	    true -> expand_pat_lit(Val, A);
	    false -> literal(Val, A)
	end,
    C#iclause{pats=[Alias#ialias{pat=P}|Ps]};
expand_pat_lit_clause(#iclause{pats=[#k_literal{anno=A,val=Val}|Ps]}=C, B) ->
    P = case B of
	    true -> expand_pat_lit(Val, A);
	    false -> literal(Val, A)
	end,
    C#iclause{pats=[P|Ps]};
expand_pat_lit_clause(#iclause{pats=[#k_binary{anno=A,segs=#k_bin_end{}}|Ps]}=C, B) ->
    case B of
	true ->
	    C;
	false ->
	    P = #k_literal{anno=A,val = <<>>},
	    C#iclause{pats=[P|Ps]}
    end;
expand_pat_lit_clause(C, _) -> C.

expand_pat_lit([H|T], A) ->
    #k_cons{anno=A,hd=literal(H, A),tl=literal(T, A)};
expand_pat_lit(Tuple, A) when is_tuple(Tuple) ->
    #k_tuple{anno=A,es=[literal(E, A) || E <- tuple_to_list(Tuple)]};
expand_pat_lit(Lit, A) ->
    literal(Lit, A).

literal([], A) ->
    #k_nil{anno=A};
literal(Val, A) when is_integer(Val) ->
    #k_int{anno=A,val=Val};
literal(Val, A) when is_float(Val) ->
    #k_float{anno=A,val=Val};
literal(Val, A) when is_atom(Val) ->
    #k_atom{anno=A,val=Val};
literal(Val, A) when is_list(Val); is_tuple(Val) ->
    #k_literal{anno=A,val=Val}.

%% select_bin_con([Clause]) -> [{Type,[Clause]}].
%%  Extract clauses for the k_bin_seg constructor.  As k_bin_seg
%%  matching can overlap, the k_bin_seg constructors cannot be
%%  reordered, only grouped.

select_bin_con(Cs0) ->
    Cs1 = lists:filter(fun (C) ->
			       Con = clause_con(C),
			       (Con =:= k_bin_seg) or (Con =:= k_bin_end)
		       end, Cs0),
    select_bin_con_1(Cs1).


select_bin_con_1(Cs) ->
    try
	%% The usual way to match literals is to first extract the
	%% value to a register, and then compare the register to the
	%% literal value. Extracting the value is good if we need
	%% compare it more than once.
	%%
	%% But we would like to combine the extracting and the
	%% comparing into a single instruction if we know that
	%% a binary segment must contain specific integer value
	%% or the matching will fail, like in this example:
	%%
	%% <<42:8,...>> ->
	%% <<42:8,...>> ->
	%% .
	%% .
	%% .
	%% <<42:8,...>> ->
	%% <<>> ->
	%%
	%% The first segment must either contain the integer 42
	%% or the binary must end for the match to succeed.
	%%
	%% The way we do is to replace the generic #k_bin_seg{}
	%% record with a #k_bin_int{} record if all clauses will
	%% select the same literal integer (except for one or more
	%% clauses that will end the binary).

	{BinSegs0,BinEnd} =
	    partition(fun (C) ->
			      clause_con(C) =:= k_bin_seg
		      end, Cs),
	BinSegs = select_bin_int(BinSegs0),
	case BinEnd of
	    [] -> BinSegs;
	    [_|_] -> BinSegs ++ [{k_bin_end,BinEnd}]
	end
    catch
	throw:not_possible ->
	    select_bin_con_2(Cs)
    end.

select_bin_con_2([C1|Cs]) ->
    Con = clause_con(C1),
    {More,Rest} = splitwith(fun (C) -> clause_con(C) =:= Con end, Cs),
    [{Con,[C1|More]}|select_bin_con_2(Rest)];
select_bin_con_2([]) -> [].

%% select_bin_int([Clause]) -> {k_bin_int,[Clause]}
%%  If the first pattern in each clause selects the same integer,
%%  rewrite all clauses to use #k_bin_int{} (which will later be
%%  translated to a bs_match_string/4 instruction).
%%
%%  If it is not possible to do this rewrite, a 'not_possible'
%%  exception is thrown.

select_bin_int([#iclause{pats=[#k_bin_seg{anno=A,type=integer,
 					  size=#k_int{val=Bits0}=Sz,unit=U,
 					  flags=Fl,seg=#k_literal{val=Val},
					  next=N}|Ps]}=C|Cs0])
  when is_integer(Val) ->
    Bits = U * Bits0,
    if
	Bits > 1024 -> throw(not_possible); %Expands the code too much.
	true -> ok
    end,
    select_assert_match_possible(Bits, Val, Fl),
    P = #k_bin_int{anno=A,size=Sz,unit=U,flags=Fl,val=Val,next=N},
    case member(native, Fl) of
	true -> throw(not_possible);
	false -> ok
    end,
    Cs = select_bin_int_1(Cs0, Bits, Fl, Val),
    [{k_bin_int,[C#iclause{pats=[P|Ps]}|Cs]}];
select_bin_int([#iclause{pats=[#k_bin_seg{anno=A,type=utf8,
 					  flags=[unsigned,big]=Fl,
					  seg=#k_literal{val=Val0},
					  next=N}|Ps]}=C|Cs0])
  when is_integer(Val0) ->
    {Val,Bits} = select_utf8(Val0),
    P = #k_bin_int{anno=A,size=#k_int{val=Bits},unit=1,
		   flags=Fl,val=Val,next=N},
    Cs = select_bin_int_1(Cs0, Bits, Fl, Val),
    [{k_bin_int,[C#iclause{pats=[P|Ps]}|Cs]}];
select_bin_int(_) -> throw(not_possible).

select_bin_int_1([#iclause{pats=[#k_bin_seg{anno=A,type=integer,
					    size=#k_int{val=Bits0}=Sz,
					    unit=U,
					    flags=Fl,seg=#k_literal{val=Val},
					    next=N}|Ps]}=C|Cs],
		 Bits, Fl, Val) when is_integer(Val) ->
    if
	Bits0*U =:= Bits -> ok;
	true -> throw(not_possible)
    end,
    P = #k_bin_int{anno=A,size=Sz,unit=U,flags=Fl,val=Val,next=N},
    [C#iclause{pats=[P|Ps]}|select_bin_int_1(Cs, Bits, Fl, Val)];
select_bin_int_1([#iclause{pats=[#k_bin_seg{anno=A,type=utf8,
					    flags=Fl,
					    seg=#k_literal{val=Val0},
					    next=N}|Ps]}=C|Cs],
		 Bits, Fl, Val) when is_integer(Val0) ->
    case select_utf8(Val0) of
	{Val,Bits} -> ok;
	{_,_} -> throw(not_possible)
    end,
    P = #k_bin_int{anno=A,size=#k_int{val=Bits},unit=1,
		   flags=[unsigned,big],val=Val,next=N},
    [C#iclause{pats=[P|Ps]}|select_bin_int_1(Cs, Bits, Fl, Val)];
select_bin_int_1([], _, _, _) -> [];
select_bin_int_1(_, _, _, _) -> throw(not_possible).

select_assert_match_possible(Sz, Val, Fs) ->
    EmptyBindings = erl_eval:new_bindings(),
    MatchFun = match_fun(Val),
    EvalFun = fun({integer,_,S}, B) -> {value,S,B} end,
    Expr = [{bin_element,0,{integer,0,Val},{integer,0,Sz},[{unit,1}|Fs]}],
    {value,Bin,EmptyBindings} = eval_bits:expr_grp(Expr, EmptyBindings, EvalFun),
    try
	{match,_} = eval_bits:match_bits(Expr, Bin,
					 EmptyBindings,
					 EmptyBindings,
					 MatchFun, EvalFun),
	ok  % this is just an assertion (i.e., no return value)
    catch
	throw:nomatch ->
	    throw(not_possible)
    end.

match_fun(Val) ->
    fun(match, {{integer,_,_},NewV,Bs}) when NewV =:= Val ->
	    {match,Bs}
    end.

select_utf8(Val0) ->
    try
	Bin = <<Val0/utf8>>,
	Size = bit_size(Bin),
	<<Val:Size>> = Bin,
	{Val,Size}
    catch
	error:_ ->
	    throw(not_possible)
    end.

%% select(Con, [Clause]) -> [Clause].

select(T, Cs) -> [ C || C <- Cs, clause_con(C) =:= T ].

%% match_value([Var], Con, [Clause], Default, State) -> {SelectExpr,State}.
%%  At this point all the clauses have the same constructor, we must
%%  now separate them according to value.

match_value(Us0, T, Cs0, Def, St0) ->
    {Us1,Cs1,St1} = partition_intersection(T, Us0, Cs0, St0),
    UCss = group_value(T, Us1, Cs1),
    %%ok = io:format("match_value ~p ~p~n", [T, Css]),
    mapfoldl(fun ({Us,Cs}, St) -> match_clause(Us, Cs, Def, St) end, St1, UCss).

%% partition_intersection
%%  Partitions a map into two maps with the most common keys to the first map.
%%      case <M> of
%%          <#{a}>
%%          <#{a,b}>
%%          <#{a,c}>
%%          <#{c}>
%%      end
%%  becomes
%%      case <M,M> of
%%          <#{a}, #{ }>
%%          <#{a}, #{b}>
%%          <#{ }, #{c}>
%%          <#{a}, #{c}>
%%      end
%% The intention is to group as many keys together as possible and thus
%% reduce the number of lookups to that key.
partition_intersection(k_map, [U|_]=Us0, [_,_|_]=Cs0,St0) ->
    Ps = [clause_val(C) || C <- Cs0],
    case find_key_partition(Ps) of
        no_partition ->
            {Us0,Cs0,St0};
        Ks ->
            {Cs1,St1} = mapfoldl(fun(#iclause{pats=[Arg|Args]}=C, Sti) ->
                                         {{Arg1,Arg2},St} = partition_key_intersection(Arg, Ks, Sti),
                                         {C#iclause{pats=[Arg1,Arg2|Args]}, St}
                                 end, St0, Cs0),
            {[U|Us0],Cs1,St1}
    end;
partition_intersection(_, Us, Cs, St) ->
    {Us,Cs,St}.

partition_key_intersection(#k_map{es=Pairs}=Map,Ks,St0) ->
    F = fun(#k_map_pair{key=Key}) -> member(map_key_clean(Key), Ks) end,
    {Ps1,Ps2} = partition(F, Pairs),
    {{Map#k_map{es=Ps1},Map#k_map{es=Ps2}},St0};
partition_key_intersection(#ialias{pat=Map}=Alias,Ks,St0) ->
    %% only alias one of them
    {{Map1,Map2},St1} = partition_key_intersection(Map, Ks, St0),
    {{Map1,Alias#ialias{pat=Map2}},St1}.

% Only check for the complete intersection of keys and not commonality
find_key_partition(Ps) ->
    Sets = [sets:from_list(Ks)||Ks <- Ps],
    Is   = sets:intersection(Sets),
    case sets:to_list(Is) of
        [] -> no_partition;
        KeyIntersection ->
            %% Check if the intersection are all keys in all clauses.
            %% Don't split if they are since this will only
            %% infer extra is_map instructions with no gain.
            All = foldl(fun (Kset, Bool) ->
                                Bool andalso sets:is_subset(Kset, Is)
                        end, true, Sets),
            if All  -> no_partition;
               true -> KeyIntersection
            end
    end.

%% group_value([Clause]) -> [[Clause]].
%%  Group clauses according to value.  Here we know that
%%  1. Some types are singled valued
%%  2. The clauses in bin_segs cannot be reordered only grouped
%%  3. Other types are disjoint and can be reordered

group_value(k_cons, Us, Cs)    -> [{Us,Cs}];               %These are single valued
group_value(k_nil, Us, Cs)     -> [{Us,Cs}];
group_value(k_binary, Us, Cs)  -> [{Us,Cs}];
group_value(k_bin_end, Us, Cs) -> [{Us,Cs}];
group_value(k_bin_seg, Us, Cs) -> group_bin_seg(Us,Cs);
group_value(k_bin_int, Us, Cs) -> [{Us,Cs}];
group_value(k_map, Us, Cs)     -> group_map(Us,Cs);
group_value(_, Us, Cs) ->
    %% group_value(Cs).
    Cd = foldl(fun (C, Gcs0) -> dict:append(clause_val(C), C, Gcs0) end,
	       dict:new(), Cs),
    dict:fold(fun (_, Vcs, Css) -> [{Us,Vcs}|Css] end, [], Cd).

group_bin_seg(Us, [C1|Cs]) ->
    V1 = clause_val(C1),
    {More,Rest} = splitwith(fun (C) -> clause_val(C) == V1 end, Cs),
    [{Us,[C1|More]}|group_bin_seg(Us,Rest)];
group_bin_seg(_, []) -> [].

group_map(Us, [C1|Cs]) ->
    V1 = clause_val(C1),
    {More,Rest} = splitwith(fun (C) -> clause_val(C) =:= V1 end, Cs),
    [{Us,[C1|More]}|group_map(Us,Rest)];
group_map(_, []) -> [].

%% Profiling shows that this quadratic implementation account for a big amount
%% of the execution time if there are many values.
% group_value([C|Cs]) ->
%     V = clause_val(C),
%     Same = [ Cv || Cv <- Cs, clause_val(Cv) == V ], %Same value
%     Rest = [ Cv || Cv <- Cs, clause_val(Cv) /= V ], % and all the rest
%     [[C|Same]|group_value(Rest)];
% group_value([]) -> [].

%% match_clause([Var], [Clause], Default, State) -> {Clause,State}.
%%  At this point all the clauses have the same "value".  Build one
%%  select clause for this value and continue matching.  Rename
%%  aliases as well.

match_clause([U|Us], [C|_]=Cs0, Def, St0) ->
    Anno = get_kanno(C),
    {Match0,Vs,St1} = get_match(get_con(Cs0), St0),
    Match = sub_size_var(Match0, Cs0),
    {Cs1,St2} = new_clauses(Cs0, U, St1),
    {B,St3} = match(Vs ++ Us, Cs1, Def, St2),
    {#k_val_clause{anno=Anno,val=Match,body=B},St3}.

sub_size_var(#k_bin_seg{size=#k_var{name=Name}=Kvar}=BinSeg, [#iclause{isub=Sub}|_]) ->
    BinSeg#k_bin_seg{size=Kvar#k_var{name=get_vsub(Name, Sub)}};
sub_size_var(K, _) -> K.

get_con([C|_]) -> arg_arg(clause_arg(C)).	%Get the constructor

get_match(#k_cons{}, St0) ->
    {[H,T]=L,St1} = new_vars(2, St0),
    {#k_cons{hd=H,tl=T},L,St1};
get_match(#k_binary{}, St0) ->
    {[V]=Mes,St1} = new_vars(1, St0),
    {#k_binary{segs=V},Mes,St1};
get_match(#k_bin_seg{size=#k_atom{val=all},next={k_bin_end,[]}}=Seg, St0) ->
    {[S]=Vars,St1} = new_vars(1, St0),
    {Seg#k_bin_seg{seg=S,next=[]},Vars,St1};
get_match(#k_bin_seg{}=Seg, St0) ->
    {[S,N0],St1} = new_vars(2, St0),
    N = set_kanno(N0, [no_usage]),
    {Seg#k_bin_seg{seg=S,next=N},[S,N],St1};
get_match(#k_bin_int{}=BinInt, St0) ->
    {N0,St1} = new_var(St0),
    N = set_kanno(N0, [no_usage]),
    {BinInt#k_bin_int{next=N},[N],St1};
get_match(#k_tuple{es=Es}, St0) ->
    {Mes,St1} = new_vars(length(Es), St0),
    {#k_tuple{es=Mes},Mes,St1};
get_match(#k_map{op=exact,es=Es0}, St0) ->
    {Mes,St1} = new_vars(length(Es0), St0),
    {Es,_} = mapfoldl(fun
	    (#k_map_pair{}=Pair, [V|Vs]) ->
		{Pair#k_map_pair{val=V},Vs}
	end, Mes, Es0),
    {#k_map{op=exact,es=Es},Mes,St1};
get_match(M, St) ->
    {M,[],St}.

new_clauses(Cs0, U, St) ->
    Cs1 = map(fun (#iclause{isub=Isub0,osub=Osub0,pats=[Arg|As]}=C) ->
		      Head = case arg_arg(Arg) of
				 #k_cons{hd=H,tl=T} -> [H,T|As];
				 #k_tuple{es=Es} -> Es ++ As;
				 #k_binary{segs=E}  -> [E|As];
				 #k_bin_seg{size=#k_atom{val=all},
					    seg=S,next={k_bin_end,[]}} ->
				     [S|As];
				 #k_bin_seg{seg=S,next=N} ->
				     [S,N|As];
				 #k_bin_int{next=N} ->
				     [N|As];
				 #k_map{op=exact,es=Es} ->
				     Vals = [V || #k_map_pair{val=V} <- Es],
				     Vals ++ As;
				 _Other ->
				     As
			     end,
		      Vs = arg_alias(Arg),
		      Osub1 = foldl(fun (#k_var{name=V}, Acc) ->
					    subst_vsub(V, U#k_var.name, Acc)
				    end, Osub0, Vs),
		      Isub1 = foldl(fun (#k_var{name=V}, Acc) ->
					    subst_vsub(V, U#k_var.name, Acc)
				    end, Isub0, Vs),
		      C#iclause{isub=Isub1,osub=Osub1,pats=Head}
	      end, Cs0),
    {Cs1,St}.

%% build_guard([GuardClause]) -> GuardExpr.

build_guard([]) -> fail;
build_guard(Cs) -> #k_guard{clauses=Cs}.

%% build_select(Var, [ConClause]) -> SelectExpr.

build_select(V, [Tc|_]=Tcs) ->
    copy_anno(#k_select{var=V,types=Tcs}, Tc).

%% build_alt(First, Then) -> AltExpr.
%%  Build an alt, attempt some simple optimisation.

build_alt(fail, Then) -> Then;
build_alt(First,Then) -> build_alt_1st_no_fail(First, Then).

build_alt_1st_no_fail(First, fail) -> First;
build_alt_1st_no_fail(First, Then) ->
    copy_anno(#k_alt{first=First,then=Then}, First).

%% build_match([MatchVar], MatchExpr) -> Kexpr.
%%  Build a match expr if there is a match.

build_match(Us, #k_alt{}=Km) -> copy_anno(#k_match{vars=Us,body=Km}, Km);
build_match(Us, #k_select{}=Km) -> copy_anno(#k_match{vars=Us,body=Km}, Km);
build_match(Us, #k_guard{}=Km) -> copy_anno(#k_match{vars=Us,body=Km}, Km);
build_match(_, Km) -> Km.

%% clause_arg(Clause) -> FirstArg.
%% clause_con(Clause) -> Constructor.
%% clause_val(Clause) -> Value.
%% is_var_clause(Clause) -> boolean().

clause_arg(#iclause{pats=[Arg|_]}) -> Arg.

clause_con(C) -> arg_con(clause_arg(C)).

clause_val(C) -> arg_val(clause_arg(C), C).

is_var_clause(C) -> clause_con(C) =:= k_var.

%% arg_arg(Arg) -> Arg.
%% arg_alias(Arg) -> Aliases.
%% arg_con(Arg) -> Constructor.
%% arg_val(Arg) -> Value.
%%  These are the basic functions for obtaining fields in an argument.

arg_arg(#ialias{pat=Con}) -> Con;
arg_arg(Con) -> Con.

arg_alias(#ialias{vars=As}) -> As;
arg_alias(_Con) -> [].

arg_con(Arg) ->
    case arg_arg(Arg) of
	#k_literal{} -> k_literal;
	#k_int{} -> k_int;
	#k_float{} -> k_float;
	#k_atom{} -> k_atom;
	#k_nil{} -> k_nil;
	#k_cons{} -> k_cons; 
	#k_tuple{} -> k_tuple;
	#k_map{} -> k_map;
	#k_binary{} -> k_binary;
	#k_bin_end{} -> k_bin_end;
	#k_bin_seg{} -> k_bin_seg;
	#k_var{} -> k_var
    end.

arg_val(Arg, C) ->
    case arg_arg(Arg) of
	#k_literal{val=Lit} -> Lit;
	#k_int{val=I} -> I;
	#k_float{val=F} -> F;
	#k_atom{val=A} -> A;
	#k_tuple{es=Es} -> length(Es);
	#k_bin_seg{size=S,unit=U,type=T,flags=Fs} ->
	    case S of
		#k_var{name=V} ->
		    #iclause{isub=Isub} = C,
		    {#k_var{name=get_vsub(V, Isub)},U,T,Fs};
		_ ->
		    {set_kanno(S, []),U,T,Fs}
	    end;
	#k_map{op=exact,es=Es} ->
	    lists:sort(fun(A,B) ->
			%% on the form K :: {'lit' | 'var', term()}
			%% lit < var as intended
			erts_internal:cmp_term(A,B) < 0
		end, [map_key_clean(Key) || #k_map_pair{key=Key} <- Es])
    end.

%% ubody_used_vars(Expr, State) -> [UsedVar]
%%  Return all used variables for the body sequence. Much more
%%  efficient than using ubody/3 if the body contains nested letrecs.
ubody_used_vars(Expr, St) ->
    {_,Used,_} = ubody(Expr, return, St#kern{funs=ignore}),
    Used.

%% ubody(Expr, Break, State) -> {Expr,[UsedVar],State}.
%%  Tag the body sequence with its used variables.  These bodies
%%  either end with a #k_break{}, or with #k_return{} or an expression
%%  which itself can return, #k_enter{}, #k_match{} ... .

ubody(#iset{vars=[],arg=#iletrec{}=Let,body=B0}, Br, St0) ->
    %% An iletrec{} should never be last.
    St = iletrec_funs(Let, St0),
    ubody(B0, Br, St);
ubody(#iset{anno=A,vars=Vs,arg=E0,body=B0}, Br, St0) ->
    {E1,Eu,St1} = uexpr(E0, {break,Vs}, St0),
    {B1,Bu,St2} = ubody(B0, Br, St1),
    Ns = lit_list_vars(Vs),
    Used = union(Eu, subtract(Bu, Ns)),		%Used external vars
    {#k_seq{anno=#k{us=Used,ns=Ns,a=A},arg=E1,body=B1},Used,St2};
ubody(#ivalues{anno=A,args=As}, return, St) ->
    Au = lit_list_vars(As),
    {#k_return{anno=#k{us=Au,ns=[],a=A},args=As},Au,St};
ubody(#ivalues{anno=A,args=As}, {break,_Vbs}, St) ->
    Au = lit_list_vars(As),
    case is_in_guard(St) of
	true ->
	    {#k_guard_break{anno=#k{us=Au,ns=[],a=A},args=As},Au,St};
	false ->
	    {#k_break{anno=#k{us=Au,ns=[],a=A},args=As},Au,St}
    end;
ubody(E, return, St0) ->
    %% Enterable expressions need no trailing return.
    case is_enter_expr(E) of
	true -> uexpr(E, return, St0);
	false ->
	    {Ea,Pa,St1} = force_atomic(E, St0),
	    ubody(pre_seq(Pa, #ivalues{args=[Ea]}), return, St1)
    end;
ubody(E, {break,_Rs} = Break, St0) ->
    %%ok = io:fwrite("ubody ~w:~p~n", [?LINE,{E,Br}]),
    %% Exiting expressions need no trailing break.
    case is_exit_expr(E) of
	true -> uexpr(E, return, St0);
	false ->
	    {Ea,Pa,St1} = force_atomic(E, St0),
	    ubody(pre_seq(Pa, #ivalues{args=[Ea]}), Break, St1)
    end.

iletrec_funs(#iletrec{defs=Fs}, St0) ->
    %% Use union of all free variables.
    %% First just work out free variables for all functions.
    Free = foldl(fun ({_,#ifun{vars=Vs,body=Fb0}}, Free0) ->
			 Fbu = ubody_used_vars(Fb0, St0),
			 Ns = lit_list_vars(Vs),
			 Free1 = subtract(Fbu, Ns),
			 union(Free1, Free0)
		 end, [], Fs),
    FreeVs = make_vars(Free),
    %% Add this free info to State.
    St1 = foldl(fun ({N,#ifun{vars=Vs}}, Lst) ->
			store_free(N, length(Vs), FreeVs, Lst)
		end, St0, Fs),
    iletrec_funs_gen(Fs, FreeVs, St1).

%% Now regenerate local functions to use free variable information.
iletrec_funs_gen(_, _, #kern{funs=ignore}=St) ->
    %% Optimization: The ultimate caller is only interested in the used variables,
    %% not the updated state. Makes a difference if there are nested letrecs.
    St;
iletrec_funs_gen(Fs, FreeVs, St) ->
    foldl(fun ({N,#ifun{anno=Fa,vars=Vs,body=Fb0}}, Lst0) ->
		  Arity0 = length(Vs),
		  {Fb1,_,Lst1} = ubody(Fb0, return, Lst0#kern{ff={N,Arity0}}),
		  Arity = Arity0 + length(FreeVs),
		  Fun = #k_fdef{anno=#k{us=[],ns=[],a=Fa},
				func=N,arity=Arity,
				vars=Vs ++ FreeVs,body=Fb1},
		  Lst1#kern{funs=[Fun|Lst1#kern.funs]}
	  end, St, Fs).


%% is_exit_expr(Kexpr) -> boolean().
%%  Test whether Kexpr always exits and never returns.

is_exit_expr(#k_receive_next{}) -> true;
is_exit_expr(_) -> false.

%% is_enter_expr(Kexpr) -> boolean().
%%  Test whether Kexpr is "enterable", i.e. can handle return from
%%  within itself without extra #k_return{}.

is_enter_expr(#k_try{}) -> true;
is_enter_expr(#k_call{}) -> true;
is_enter_expr(#k_match{}) -> true;
is_enter_expr(#k_receive{}) -> true;
is_enter_expr(#k_receive_next{}) -> true;
is_enter_expr(_) -> false.

%% uexpr(Expr, Break, State) -> {Expr,[UsedVar],State}.
%%  Tag an expression with its used variables.
%%  Break = return | {break,[RetVar]}.

uexpr(#k_test{anno=A,op=Op,args=As}=Test, {break,Rs}, St) ->
    [] = Rs,					%Sanity check
    Used = union(op_vars(Op), lit_list_vars(As)),
    {Test#k_test{anno=#k{us=Used,ns=lit_list_vars(Rs),a=A}},
     Used,St};
uexpr(#iset{anno=A,vars=Vs,arg=E0,body=B0}, {break,_}=Br, St0) ->
    Ns = lit_list_vars(Vs),
    {E1,Eu,St1} = uexpr(E0, {break,Vs}, St0),
    {B1,Bu,St2} = uexpr(B0, Br, St1),
    Used = union(Eu, subtract(Bu, Ns)),
    {#k_seq{anno=#k{us=Used,ns=Ns,a=A},arg=E1,body=B1},Used,St2};
uexpr(#k_call{anno=A,op=#k_local{name=F,arity=Ar}=Op,args=As0}=Call, Br, St) ->
    Free = get_free(F, Ar, St),
    As1 = As0 ++ Free,				%Add free variables LAST!
    Used = lit_list_vars(As1),
    {case Br of
	 {break,Rs} ->
	     Call#k_call{anno=#k{us=Used,ns=lit_list_vars(Rs),a=A},
			 op=Op#k_local{arity=Ar + length(Free)},
			 args=As1,ret=Rs};
	 return ->
	     #k_enter{anno=#k{us=Used,ns=[],a=A},
		      op=Op#k_local{arity=Ar + length(Free)},
		      args=As1}
     end,Used,St};
uexpr(#k_call{anno=A,op=Op,args=As}=Call, {break,Rs}, St) ->
    Used = union(op_vars(Op), lit_list_vars(As)),
    {Call#k_call{anno=#k{us=Used,ns=lit_list_vars(Rs),a=A},ret=Rs},
     Used,St};
uexpr(#k_call{anno=A,op=Op,args=As}, return, St) ->
    Used = union(op_vars(Op), lit_list_vars(As)),
    {#k_enter{anno=#k{us=Used,ns=[],a=A},op=Op,args=As},
     Used,St};
uexpr(#k_bif{anno=A,op=Op,args=As}=Bif, {break,Rs}, St0) ->
    Used = union(op_vars(Op), lit_list_vars(As)),
    {Brs,St1} = bif_returns(Op, Rs, St0),
    {Bif#k_bif{anno=#k{us=Used,ns=lit_list_vars(Brs),a=A},ret=Brs},
     Used,St1};
uexpr(#k_match{anno=A,vars=Vs0,body=B0}, Br, St0) ->
    Vs = handle_reuse_annos(Vs0, St0),
    Rs = break_rets(Br),
    {B1,Bu,St1} = umatch(B0, Br, St0),
    case is_in_guard(St1) of
	true ->
	    {#k_guard_match{anno=#k{us=Bu,ns=lit_list_vars(Rs),a=A},
			    vars=Vs,body=B1,ret=Rs},Bu,St1};
	false ->
	    {#k_match{anno=#k{us=Bu,ns=lit_list_vars(Rs),a=A},
		      vars=Vs,body=B1,ret=Rs},Bu,St1}
    end;
uexpr(#k_receive{anno=A,var=V,body=B0,timeout=T,action=A0}, Br, St0) ->
    Rs = break_rets(Br),
    Tu = lit_vars(T),				%Timeout is atomic
    {B1,Bu,St1} = umatch(B0, Br, St0),
    {A1,Au,St2} = ubody(A0, Br, St1),
    Used = del_element(V#k_var.name, union(Bu, union(Tu, Au))),
    {#k_receive{anno=#k{us=Used,ns=lit_list_vars(Rs),a=A},
		var=V,body=B1,timeout=T,action=A1,ret=Rs},
     Used,St2};
uexpr(#k_receive_accept{anno=A}, _, St) ->
    {#k_receive_accept{anno=#k{us=[],ns=[],a=A}},[],St};
uexpr(#k_receive_next{anno=A}, _, St) ->
    {#k_receive_next{anno=#k{us=[],ns=[],a=A}},[],St};
uexpr(#k_try{anno=A,arg=A0,vars=Vs,body=B0,evars=Evs,handler=H0},
      {break,Rs0}=Br, St0) ->
    case is_in_guard(St0) of
	true ->
	    {[#k_var{name=X}],#k_var{name=X}} = {Vs,B0}, %Assertion.
	    #k_atom{val=false} = H0,		%Assertion.
	    {A1,Bu,St1} = uexpr(A0, Br, St0),
	    {#k_protected{anno=#k{us=Bu,ns=lit_list_vars(Rs0),a=A},
			  arg=A1,ret=Rs0},Bu,St1};
	false ->
	    {Avs,St1} = new_vars(length(Vs), St0),
	    {A1,Au,St2} = ubody(A0, {break,Avs}, St1),
	    {B1,Bu,St3} = ubody(B0, Br, St2),
	    {H1,Hu,St4} = ubody(H0, Br, St3),
	    {Rs1,St5} = ensure_return_vars(Rs0, St4),
	    Used = union([Au,subtract(Bu, lit_list_vars(Vs)),
			  subtract(Hu, lit_list_vars(Evs))]),
	    {#k_try{anno=#k{us=Used,ns=lit_list_vars(Rs1),a=A},
		    arg=A1,vars=Vs,body=B1,evars=Evs,handler=H1,ret=Rs1},
	     Used,St5}
    end;
uexpr(#k_try{anno=A,arg=A0,vars=Vs,body=B0,evars=Evs,handler=H0},
      return, St0) ->
    {Avs,St1} = new_vars(length(Vs), St0),	%Need dummy names here
    {A1,Au,St2} = ubody(A0, {break,Avs}, St1),	%Must break to clean up here!
    {B1,Bu,St3} = ubody(B0, return, St2),
    {H1,Hu,St4} = ubody(H0, return, St3),
    NumNew = 1,
    {Ns,St5} = new_vars(NumNew, St4),
    Used = union([Au,subtract(Bu, lit_list_vars(Vs)),
		  subtract(Hu, lit_list_vars(Evs))]),
    {#k_try_enter{anno=#k{us=Used,ns=Ns,a=A},
		  arg=A1,vars=Vs,body=B1,evars=Evs,handler=H1},
     Used,St5};
uexpr(#k_catch{anno=A,body=B0}, {break,Rs0}, St0) ->
    {Rb,St1} = new_var(St0),
    {B1,Bu,St2} = ubody(B0, {break,[Rb]}, St1),
    %% Guarantee ONE return variable.
    {Ns,St3} = new_vars(1 - length(Rs0), St2),
    Rs1 = Rs0 ++ Ns,
    {#k_catch{anno=#k{us=Bu,ns=lit_list_vars(Rs1),a=A},body=B1,ret=Rs1},Bu,St3};
uexpr(#ifun{anno=A,vars=Vs,body=B0}, {break,Rs}, St0) ->
    {B1,Bu,St1} = ubody(B0, return, St0),	%Return out of new function
    Ns = lit_list_vars(Vs),
    Free = subtract(Bu, Ns),			%Free variables in fun
    Fvs = make_vars(Free),
    Arity = length(Vs) + length(Free),
    {Fname,St} =
	case lists:keyfind(id, 1, A) of 
	    {id,{_,_,Fname0}} ->
		{Fname0,St1};
	    false ->
		%% No id annotation. Must invent a fun name.
		new_fun_name(St1)
	end,
    Fun = #k_fdef{anno=#k{us=[],ns=[],a=A},func=Fname,arity=Arity,
		  vars=Vs ++ Fvs,body=B1},
    {#k_bif{anno=#k{us=Free,ns=lit_list_vars(Rs),a=A},
	    op=#k_internal{name=make_fun,arity=length(Free)+2},
	    args=[#k_atom{val=Fname},#k_int{val=Arity}|Fvs],
 	    ret=Rs},
     Free,add_local_function(Fun, St)};
uexpr(Lit, {break,Rs0}, St0) ->
    %% Transform literals to puts here.
    %%ok = io:fwrite("uexpr ~w:~p~n", [?LINE,Lit]),
    Used = lit_vars(Lit),
    {Rs,St1} = ensure_return_vars(Rs0, St0),
    {#k_put{anno=#k{us=Used,ns=lit_list_vars(Rs),a=get_kanno(Lit)},
	    arg=Lit,ret=Rs},Used,St1}.

add_local_function(_, #kern{funs=ignore}=St) -> St;
add_local_function(F, #kern{funs=Funs}=St) -> St#kern{funs=[F|Funs]}.

%% handle_reuse_annos([#k_var{}], State) -> State.
%%  In general, it is only safe to reuse a variable for a match context
%%  if the original value of the variable will no longer be needed.
%%
%%  If a variable has been bound in an outer letrec and is therefore
%%  free in the current function, the variable may still be used.
%%  We don't bother to check whether the variable is actually used,
%%  but simply clears the 'reuse_for_context' annotation for any variable
%%  that is free.
handle_reuse_annos(Vs, St) ->
    [handle_reuse_anno(V, St) || V <- Vs].

handle_reuse_anno(#k_var{anno=A}=V, St) ->
    case member(reuse_for_context, A) of
	false -> V;
	true -> handle_reuse_anno_1(V, St)
    end.

handle_reuse_anno_1(#k_var{anno=Anno,name=Vname}=V, #kern{ff={F,A}}=St) ->
    FreeVs = get_free(F, A, St),
    case keymember(Vname, #k_var.name, FreeVs) of
	true -> V#k_var{anno=Anno--[reuse_for_context]};
	false -> V
    end;
handle_reuse_anno_1(V, _St) -> V.

%% get_free(Name, Arity, State) -> [Free].
%% store_free(Name, Arity, [Free], State) -> State.

get_free(F, A, #kern{free=FreeMap}) ->
    Key = {F,A},
    case FreeMap of
	#{Key:=Val} -> Val;
	_ -> []
    end.

store_free(F, A, Free, #kern{free=FreeMap0}=St) ->
    Key = {F,A},
    FreeMap = FreeMap0#{Key=>Free},
    St#kern{free=FreeMap}.

break_rets({break,Rs}) -> Rs;
break_rets(return) -> [].

%% bif_returns(Op, [Ret], State) -> {[Ret],State}.

bif_returns(#k_remote{mod=M,name=N,arity=Ar}, Rs, St0) ->
    %%ok = io:fwrite("uexpr ~w:~p~n", [?LINE,{M,N,Ar,Rs}]),
    {Ns,St1} = new_vars(bif_vals(M, N, Ar) - length(Rs), St0),
    {Rs ++ Ns,St1};
bif_returns(#k_internal{name=N,arity=Ar}, Rs, St0) ->
    %%ok = io:fwrite("uexpr ~w:~p~n", [?LINE,{N,Ar,Rs}]),
    {Ns,St1} = new_vars(bif_vals(N, Ar) - length(Rs), St0),
    {Rs ++ Ns,St1}.

%% ensure_return_vars([Ret], State) -> {[Ret],State}.

ensure_return_vars([], St) -> new_vars(1, St);
ensure_return_vars([_]=Rs, St) -> {Rs,St}.

%% umatch(Match, Break, State) -> {Match,[UsedVar],State}.
%%  Tag a match expression with its used variables.

umatch(#k_alt{anno=A,first=F0,then=T0}, Br, St0) ->
    {F1,Fu,St1} = umatch(F0, Br, St0),
    {T1,Tu,St2} = umatch(T0, Br, St1),
    Used = union(Fu, Tu),
    {#k_alt{anno=#k{us=Used,ns=[],a=A},first=F1,then=T1},
     Used,St2};
umatch(#k_select{anno=A,var=V0,types=Ts0}, Br, St0) ->
    V = handle_reuse_anno(V0, St0),
    {Ts1,Tus,St1} = umatch_list(Ts0, Br, St0),
    Used = case member(no_usage, get_kanno(V)) of
	       true -> Tus;
	       false -> add_element(V#k_var.name, Tus)
	   end,
    {#k_select{anno=#k{us=Used,ns=[],a=A},var=V,types=Ts1},Used,St1};
umatch(#k_type_clause{anno=A,type=T,values=Vs0}, Br, St0) ->
    {Vs1,Vus,St1} = umatch_list(Vs0, Br, St0),
    {#k_type_clause{anno=#k{us=Vus,ns=[],a=A},type=T,values=Vs1},Vus,St1};
umatch(#k_val_clause{anno=A,val=P0,body=B0}, Br, St0) ->
    {U0,Ps} = pat_vars(P0),
    P = set_kanno(P0, #k{us=U0,ns=Ps,a=get_kanno(P0)}),
    {B1,Bu,St1} = umatch(B0, Br, St0),
    Used = union(U0, subtract(Bu, Ps)),
    {#k_val_clause{anno=#k{us=Used,ns=[],a=A},val=P,body=B1},
     Used,St1};
umatch(#k_guard{anno=A,clauses=Gs0}, Br, St0) ->
    {Gs1,Gus,St1} = umatch_list(Gs0, Br, St0),
    {#k_guard{anno=#k{us=Gus,ns=[],a=A},clauses=Gs1},Gus,St1};
umatch(#k_guard_clause{anno=A,guard=G0,body=B0}, Br, St0) ->
    %%ok = io:fwrite("~w: ~p~n", [?LINE,G0]),
    {G1,Gu,St1} = uexpr(G0, {break,[]},
			St0#kern{guard_refc=St0#kern.guard_refc+1}),
    %%ok = io:fwrite("~w: ~p~n", [?LINE,G1]),
    {B1,Bu,St2} = umatch(B0, Br, St1#kern{guard_refc=St1#kern.guard_refc-1}),
    Used = union(Gu, Bu),
    {#k_guard_clause{anno=#k{us=Used,ns=[],a=A},guard=G1,body=B1},Used,St2};
umatch(B0, Br, St0) -> ubody(B0, Br, St0).

umatch_list(Ms0, Br, St) ->
    foldr(fun (M0, {Ms1,Us,Sta}) ->
		  {M1,Mu,Stb} = umatch(M0, Br, Sta),
		  {[M1|Ms1],union(Mu, Us),Stb}
	  end, {[],[],St}, Ms0).

%% op_vars(Op) -> [VarName].

op_vars(#k_remote{mod=Mod,name=Name}) ->
    ordsets:from_list([V || #k_var{name=V} <- [Mod,Name]]);
op_vars(#k_internal{}) -> [];
op_vars(Atomic) -> lit_vars(Atomic).

%% lit_vars(Literal) -> [VarName].
%%  Return the variables in a literal.

lit_vars(#k_var{name=N}) -> [N];
lit_vars(#k_int{}) -> [];
lit_vars(#k_float{}) -> [];
lit_vars(#k_atom{}) -> [];
%%lit_vars(#k_char{}) -> [];
lit_vars(#k_nil{}) -> [];
lit_vars(#k_cons{hd=H,tl=T}) ->
    union(lit_vars(H), lit_vars(T));
lit_vars(#k_map{var=Var,es=Es}) ->
    lit_list_vars([Var|Es]);
lit_vars(#k_map_pair{key=K,val=V}) ->
    union(lit_vars(K), lit_vars(V));
lit_vars(#k_binary{segs=V}) -> lit_vars(V);
lit_vars(#k_bin_end{}) -> [];
lit_vars(#k_bin_seg{size=Size,seg=S,next=N}) ->
    union(lit_vars(Size), union(lit_vars(S), lit_vars(N)));
lit_vars(#k_tuple{es=Es}) ->
    lit_list_vars(Es);
lit_vars(#k_literal{}) -> [].

lit_list_vars(Ps) ->
    foldl(fun (P, Vs) -> union(lit_vars(P), Vs) end, [], Ps).

%% pat_vars(Pattern) -> {[UsedVarName],[NewVarName]}.
%%  Return variables in a pattern.  All variables are new variables
%%  except those in the size field of binary segments.
%%  and map_pair keys

pat_vars(#k_var{name=N}) -> {[],[N]};
%%pat_vars(#k_char{}) -> {[],[]};
pat_vars(#k_literal{}) -> {[],[]};
pat_vars(#k_int{}) -> {[],[]};
pat_vars(#k_float{}) -> {[],[]};
pat_vars(#k_atom{}) -> {[],[]};
pat_vars(#k_nil{}) -> {[],[]};
pat_vars(#k_cons{hd=H,tl=T}) ->
    pat_list_vars([H,T]);
pat_vars(#k_binary{segs=V}) ->
    pat_vars(V);
pat_vars(#k_bin_seg{size=Size,seg=S}) ->
    {U1,New} = pat_list_vars([S]),
    {[],U2} = pat_vars(Size),
    {union(U1, U2),New};
pat_vars(#k_bin_int{size=Size}) ->
    {[],U} = pat_vars(Size),
    {U,[]};
pat_vars(#k_bin_end{}) -> {[],[]};
pat_vars(#k_tuple{es=Es}) ->
    pat_list_vars(Es);
pat_vars(#k_map{es=Es}) ->
    pat_list_vars(Es);
pat_vars(#k_map_pair{key=K,val=V}) ->
    {U1,New} = pat_vars(V),
    {[], U2} = pat_vars(K),
    {union(U1,U2),New}.

pat_list_vars(Ps) ->
    foldl(fun (P, {Used0,New0}) ->
		  {Used,New} = pat_vars(P),
		  {union(Used0, Used),union(New0, New)} end,
	  {[],[]}, Ps).

%% List of integers in interval [N,M]. Empty list if N > M.

integers(N, M) when N =< M ->
    [N|integers(N + 1, M)];
integers(_, _) -> [].

%% is_in_guard(State) -> true|false.

is_in_guard(#kern{guard_refc=Refc}) ->
    Refc > 0.

%%%
%%% Handling of errors and warnings.
%%%

-type error() :: 'bad_call' | 'nomatch_shadow' | {'nomatch_shadow', integer()}.

-spec format_error(error()) -> string().

format_error({nomatch_shadow,Line}) ->
    M = io_lib:format("this clause cannot match because a previous clause at line ~p "
		      "always matches", [Line]),
    lists:flatten(M);
format_error(nomatch_shadow) ->
    "this clause cannot match because a previous clause always matches";
format_error(bad_call) ->
    "invalid module and/or function name; this call will always fail";
format_error(bad_segment_size) ->
    "binary construction will fail because of a type mismatch".

add_warning(none, Term, Anno, #kern{ws=Ws}=St) ->
    File = get_file(Anno),
    St#kern{ws=[{File,[{none,?MODULE,Term}]}|Ws]};
add_warning(Line, Term, Anno, #kern{ws=Ws}=St) ->
    File = get_file(Anno),
    St#kern{ws=[{File,[{Line,?MODULE,Term}]}|Ws]}.

is_compiler_generated(Ke) ->
    Anno = get_kanno(Ke),
    member(compiler_generated, Anno).