path: root/lib/diameter/doc/src/diameter_dict.xml

<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE erlref SYSTEM "fileref.dtd">

<fileref>
<header>

<copyright>
<year>2011</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
    
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
    
</legalnotice>

<title>diameter_dict(4)</title>
<prepared>Anders Svensson</prepared>
<responsible></responsible>
<docno></docno>
<approved></approved>
<checked></checked>
<date></date>
<rev>%VSN%</rev>
<file>diameter_dict.xml</file>
</header>

<!-- ===================================================================== -->

<file>diameter_dict</file>
<filesummary>Dictionary inteface of the diameter application.</filesummary>

<description>
<p>
A diameter service as configured with <seealso
marker="diameter#start_service">diameter:start_service/2</seealso>
specifies one or more supported Diameter applications.
Each Diameter application specifies a dictionary module that knows how
to encode and decode its messages and AVP's.
The dictionary module is in turn generated from a file that defines
these messages and AVP's.
The format of such a file is defined in
<seealso marker="#FILE_FORMAT">FILE FORMAT</seealso> below.</p>

<p>
The codec generation also results in an hrl that defines records
for the messages and grouped AVP's defined for the application, these
records being what a user of the diameter application sends and
receives.
These records and the underlying Erlang data types corresponding to
Diameter data formats are discussed in <seealso
marker="#MESSAGE_RECORDS">MESSAGE RECORDS</seealso> and <seealso
marker="#DATA_TYPES">DATA TYPES</seealso> respectively.</p>

<!-- TODO: Need some reserved dictionary for agents that shouldn't -->
<!--       know about specific applications. -->

<p>
The diameter application defines the base application of RFC 3588 in
the file diameter_gen_base_rfc3588.dia, and
this is the only application that diameter itself has any specific
knowledge of.
Other applications are callback modules configured for an application
as far as diameter is concerned.</p>

<p>
A generated hrl also contains defines for the values of defined for
AVPs of type Enumerated.</p>

<p>
See <seealso marker="diameter_compile">diameterc</seealso> for a
utility that transforms dictionary files into codec modules needed
at runtime.</p>

<marker id="FILE_FORMAT"/>
</description>

<!-- ===================================================================== -->

<section>
<title>FILE FORMAT</title>

<p>
A specification file consists of distinct sections.
Each section starts with a line consisting of a tag
followed by zero or more arguments.
Each section ends at the the start of the next section or end of file.
Tags consist of an ampersand character followed by a keyword and are
separated from their arguments by whitespace.
Whitespace within a section separates individual tokens but its
quantity is insignificant.</p>

<p>
The tags, their arguments and the contents of each corresponding
section are as follows.
Each section can occur only once unless otherwise specified.
The order in which sections are specified is unimportant.</p>

<taglist>

<tag><c>@id Number</c></tag>
<item>
<p>
Defines the integer Number as the Diameter Application Id of the
application in question.
The section has empty content.</p>

<p>
The Application Id is set in the Diameter Header of outgoing messages
of the application, and the value in the header of an incoming message
is used to identify the relevant dictionary module.</p>

<p>
Example:</p>

<code>
@id 16777231
</code>

</item>

<tag><c>@name Mod</c></tag>
<item>
<p>
Defines the name of the generated dictionary module.
The section has empty content.
Mod must match the regular expression '^[a-zA-Z0-9][-_a-zA-Z0-9]*$';
that is, contains only alphanumerics, hyphens and underscores begin with an
alphanumeric.</p>

<p>
A name is optional and defaults to the name of the dictionary file
minus any extension.
Note that a generated module must have a unique name an not colide
with another module in the system.</p>

<p>
Example:</p>

<code>
@name etsi_e2
</code>

</item>

<tag><c>@prefix Name</c></tag>
<item>
<p>
Defines Name as the prefix to be added to record and constant names in
the generated dictionary module and hrl.
The section has empty content.
Name must be of the same form as a @name.</p>

<p>
A prefix is optional but can
be used to disambiguate record and constant names
resulting from similarly named messages and AVP's in different
Diameter applications.</p>

<p>
Example:</p>

<code>
@prefix etsi_e2_
</code>

</item>

<tag><c>@vendor Number Name</c></tag>
<item>
<p>
Defines the integer Number as the the default Vendor-ID of AVP's for
which the V flag is set.
Name documents the owner of the application
but is otherwise unused.
The section has empty content.</p>

<p>
Example:</p>

<code>
@vendor 13019 ETSI
</code>

</item>

<tag><c>@avp_vendor_id Number</c></tag>
<item>
<p>
Defines the integer Number as the Vendor-ID of the AVP's listed in the
section content, overriding the <c>@vendor</c> default.
The section content consists of AVP names.
Can occur zero or more times (with different values of Number).</p>

<p>
Example:</p>

<code>
@avp_vendor_id 2937

WWW-Auth
Domain-Index
Region-Set
</code>

</item>

<tag><c>@inherits Mod</c></tag>
<item>
<p>
Defines the name of a generated dictionary module containing AVP
definitions referenced by the dictionary but not defined by it.
The section content is empty.</p>

<p>
Can occur 0 or more times (with different values of Mod) but all
dictionaries should typically inherit RFC3588 AVPs from
diameter_gen_base_rfc3588.</p>

<p>
Example:</p>

<code>
@inherits diameter_gen_base_rfc3588
</code>

</item>

<tag><c>@avp_types</c></tag>
<item>
<p>
Defines the name, code, type and flags of individual AVPs.
The section consists of definitions of the form</p>

<p><c>Name Code Type Flags</c></p>

<p>
where Code is the integer AVP code, Flags is a string of V,
M and P characters indicating the flags to be
set on an outgoing AVP or a single - (minus) character if none are to
be set.
Type identifies either an AVP Data Format as defined in <seealso
marker="DATA_TYPES">DATA TYPES</seealso> below or a
type as defined by a <c>@custom_types</c> tag.</p>

<p>
Example:</p>

<code>
@avp_types

Location-Information   350  Grouped     VM
Requested-Information  353  Enumerated  V
</code>

<p>
Note that the P flag has been deprecated by the Diameter Maintenance
and Extensions Working Group of the IETF.</p>

</item>

<tag><c>@custom_types Mod</c></tag>
<item>
<p>
Defines AVPs for which module Mod provides encode/decode.
The section contents consists of type names.
For each AVP Name defined with custom type Type, Mod should export the
function Name/3 with arguments encode|decode, Type and Data,
the latter being the term to be encoded/decoded.
The function returns the encoded/decoded value.</p>

<p>
Can occur 0 or more times (with different values of Mod).</p>

<p>
Example:</p>

<code>
@custom_types rfc4005_types

Framed-IP-Address
</code>
</item>

<tag><c>@messages</c></tag>
<item>
<p>
Defines the messages of the application.
The section content consists of definitions of the form specified in
section 3.2 of RFC 3588, "Command Code ABNF specification".</p>

<!-- RFC 4740 RTR/RTA -->
<code>
@messages

RTR ::= &lt; Diameter Header: 287, REQ, PXY >
        &lt; Session-Id >
        { Auth-Application-Id }
        { Auth-Session-State }
        { Origin-Host }
        { Origin-Realm }
        { Destination-Host }
        { SIP-Deregistration-Reason }
        [ Destination-Realm ]
        [ User-Name ]
      * [ SIP-AOR ]
      * [ Proxy-Info ]
      * [ Route-Record ]
      * [ AVP ]

RTA ::= &lt; Diameter Header: 287, PXY >
        &lt; Session-Id >
        { Auth-Application-Id }
        { Result-Code }
        { Auth-Session-State }
        { Origin-Host }
        { Origin-Realm }
        [ Authorization-Lifetime ]
        [ Auth-Grace-Period ]
        [ Redirect-Host ]
        [ Redirect-Host-Usage ]
        [ Redirect-Max-Cache-Time ]
      * [ Proxy-Info ]
      * [ Route-Record ]
      * [ AVP ]
</code>

</item>

<tag><c>@grouped</c></tag>
<item>
<p>
Defines the contents of the AVPs of the application having type
Grouped.
The section content consists of definitions of the form specified in
section 4.4 of RFC 3588, "Grouped AVP Values".</p>

<p>
Example:</p>

<code>
@grouped

SIP-Deregistration-Reason ::= &lt; AVP Header: 383 >
                              { SIP-Reason-Code }
                              [ SIP-Reason-Info ]
                            * [ AVP ]
</code>
</item>

<tag><c>@enum Name</c></tag>
<item>
<p>
Defines values of AVP Name having type Enumerated.
Section content consists of names and corresponding integer values.
Integer values can be prefixed with 0x to be interpreted as
hexidecimal.</p>

<p>
Can occur 0 or more times (with different values of Name).</p>

<p>
Example:</p>

<code>
@enum SIP-Reason-Code

PERMANENT_TERMINATION    0
NEW_SIP_SERVER_ASSIGNED  1
SIP_SERVER_CHANGE        2
REMOVE_SIP_SERVER        3
</code>
</item>

</taglist>

<p>
Comments can be included in a dictionary file using semicolon:
text from a semicolon to end of line is ignored.</p>

<marker id="MESSAGE_RECORDS"/>
</section>

<!-- ===================================================================== -->

<section>
<title>MESSAGE RECORDS</title>

<p>
The hrl generated from a dictionary specification defines records for the
messages and grouped AVPs defined in <c>@messages</c> and
<c>@grouped</c> sections.
For each message or grouped AVP definition, a record is defined whose
name is the message or AVP name prefixed with any dictionary prefix
defined with <c>@prefix</c> and whose fields are the names of the AVPs
contained in the message or grouped AVP in the order specified in the
definition in question.
For example, the grouped AVP</p>

<code>
SIP-Deregistration-Reason ::= &lt; AVP Header: 383 >
                              { SIP-Reason-Code }
                              [ SIP-Reason-Info ]
                            * [ AVP ]
</code>

<p>
will result in the following record definition given an empty
prefix.</p>

<code>
-record('SIP-Deregistration-Reason' {'SIP-Reason-Code',
                                     'SIP-Reason-Info',
                                     'AVP'}).
</code>

<p>
The values encoded in the fields of generated records depends on the
type and number of times the AVP can occur.
In particular, an AVP which is specified as occurring exactly once is
encoded as a value of the AVP's type while an AVP with any other
specification is encoded as a list of values of the AVP's type.
The AVP's type is as specified in the AVP definition, the RFC 3588
types being described below.</p>

<marker id="DATA_TYPES"/>
</section>

<!-- ===================================================================== -->

<section>
<title>DATA TYPES</title>

<p>
The data formats defined in sections 4.2 ("Basic AVP Data
Formats") and 4.3 ("Derived AVP Data Formats") of RFC 3588 are encoded
as values of the types defined here.
Values are passed to <seealso
marker="diameter#call">diameter:call/4</seealso>
in a request record when sending a request, returned in a resulting
answer record and passed to a diameter_app(3) <seealso
marker="diameter_app#handle_request">handle_request</seealso>
callback upon reception of an incoming request.</p>

<p>
<em>Basic AVP Data Formats</em></p>

<marker id="OctetString"/>
<marker id="Integer32"/>
<marker id="Integer64"/>
<marker id="Unsigned32"/>
<marker id="Unsigned64"/>
<marker id="Float32"/>
<marker id="Float64"/>
<marker id="Grouped"/>

<code>
OctetString() = [0..255]
Integer32()   = -2147483647..2147483647
Integer64()   = -9223372036854775807..9223372036854775807
Unsigned32()  = 0..4294967295
Unsigned64()  = 0..18446744073709551615
Float32()     = '-infinity' | float() | infinity
Float64()     = '-infinity' | float() | infinity
Grouped()     = record()
</code>

<p>
On encode, an OctetString() can be specified as an iolist(),
excessively large floats (in absolute value) are equivalent to
infinity or '-infinity' and excessively large integers result in
encode failure.
The records for grouped AVPs are as discussed in the previous
section.</p>

<p>
<em>Derived AVP Data Formats</em></p>

<marker id="Address"/>
<code>
Address() = OctetString()
          | tuple()
</code>

<p>
On encode, an OctetString() IPv4 address is parsed in the usual
x.x.x.x format while an IPv6 address is parsed in any of the formats
specified by section  2.2 of RFC 2373, "Text Representation of
Addresses".
An IPv4 tuple() has length 4 and contains values of type 0..255.
An IPv6 tuple() has length 8 and contains values of type 0..65535.
The tuple representation is used on decode.</p>

<marker id="Time"/>
<code>
Time() = {date(), time()}

where

  date() = {Year, Month, Day}
  time() = {Hour, Minute, Second}

  Year   = integer()
  Month  = 1..12
  Day    = 1..31
  Hour   = 0..23
  Minute = 0..59
  Second = 0..59
</code>

<p>
Additionally, values that can be encoded are
limited by way of their encoding as four octets as required by RFC
3588 with the required extension from RFC 2030.
In particular, only values between <c>{{1968,1,20},{3,14,8}}</c>
and <c>{{2104,2,26},{9,42,23}}</c> (both inclusive) can be encoded.</p>

<marker id="UTF8String"/>
<code>
UTF8String() = [integer()]
</code>

<p>
List elements are the UTF-8 encodings of the individual characters
in the string.
Invalid codepoints will result in encode/decode failure.</p>

<marker id="DiameterIdentity"/>
<code>
DiameterIdentity() = OctetString()
</code>

<p>
A value must have length at least 1.</p>

<marker id="DiameterURI"/>
<code>
DiameterURI() = OctetString()
              | #diameter_URI{type = Type,
                              fqdn = FQDN,
                              port = Port,
                              transport = Transport,
                              protocol  = Protocol}

where

  Type = aaa | aaas
  FQDN = OctetString()
  Port = integer()
  Transport = sctp | tcp
  Protocol  = diameter | radius | 'tacacs+'
</code>

<p>
On encode, fields port, transport and protocol default to 3868, sctp
and diameter respectively.
The grammar of an OctetString-valued DiameterURI() is as specified in
section 4.3 of RFC 3588.
The record representation is used on decode.</p>

<marker id="Enumerated"/>
<code>
Enumerated() = Integer32()
</code>

<p>
On encode, values can be specified using the macros defined in a
dictionary's hrl file.</p>

<marker id="IPFilterRule"/>
<marker id="QoSFilterRule"/>
<code>
IPFilterRule()  = OctetString()
QoSFilterRule() = OctetString()
</code>

<p>
Values of these types are not parsed by diameter.</p>

</section>

<!-- ===================================================================== -->
<!-- ===================================================================== -->

<section>
<title>SEE ALSO</title>

<p>
<seealso marker="diameter_util">diameterc(1)</seealso></p>

</section>

</fileref>