path: root/lib/kernel/doc/src/error_logger.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>1996</year><year>2016</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
    
    </legalnotice>

    <title>error_logger</title>
    <prepared></prepared>
    <docno></docno>
    <date></date>
    <rev></rev>
  </header>
  <module>error_logger</module>
  <modulesummary>Erlang error logger.</modulesummary>
  <description>
    <p>The Erlang <em>error logger</em> is an event manager (see
      <seealso marker="doc/design_principles:des_princ">OTP Design Principles</seealso> and
      <seealso marker="stdlib:gen_event"><c>stdlib:gen_event(3)</c></seealso>),
      registered as <c>error_logger</c>. Errors, warnings, and info events
      are sent to the error logger from the Erlang runtime system and
      the different Erlang/OTP applications. The events are, by default,
      logged to the terminal. Notice that an event from a process <c>P</c> is
      logged at the node of the group leader of <c>P</c>. This means
      that log output is directed to the node from which a process was
      created, which not necessarily is the same node as where it is
      executing.</p>
    <p>Initially, <c>error_logger</c> has only a primitive event
      handler, which buffers and prints the raw event messages. During
      system startup, the <c>Kernel</c> application replaces this with a
      <em>standard event handler</em>, by default one that writes
      nicely formatted output to the terminal. <c>Kernel</c> can also be
      configured so that events are logged to a file instead, or not logged at all,
      see <seealso marker="kernel_app"><c>kernel(6)</c></seealso>.</p>
    <p>Also the <c>SASL</c> application, if started, adds its own event
      handler, which by default writes supervisor, crash, and progress
      reports to the terminal. See
      <seealso marker="sasl:sasl_app"><c>sasl(6)</c></seealso>.</p>
    <p>It is recommended that user-defined applications report
      errors through the error logger to get uniform reports.
      User-defined event handlers can be added to handle application-specific
      events, see
      <seealso marker="#add_report_handler/1"><c>add_report_handler/1,2</c></seealso>.
      Also, a useful event handler is provided in <c>STDLIB</c> for multi-file
      logging of events, see
      <seealso marker="stdlib:log_mf_h"><c>stdlib:log_mf_h(3)</c></seealso>.</p>
    <p>Warning events were introduced in Erlang/OTP R9C and are enabled
      by default as from Erlang/OTP 18.0. To retain backwards compatibility
      with existing user-defined event handlers, the warning events can be
      tagged as <c>errors</c> or <c>info</c> using command-line flag
      <c><![CDATA[+W <e | i | w>]]></c>, thus showing up as
      <c>ERROR REPORT</c> or <c>INFO REPORT</c> in the logs.</p>
  </description>
  <datatypes>
    <datatype>
      <name name="report"/>
    </datatype>
  </datatypes>
  <funcs>
    <func>
      <name name="add_report_handler" arity="1"/>
      <name name="add_report_handler" arity="2"/>
      <fsummary>Add an event handler to the error logger.</fsummary>
      <desc>
        <p>Adds a new event handler to the error logger. The event
          handler must be implemented as a <c>gen_event</c> callback
          module, see
          <seealso marker="stdlib:gen_event"><c>stdlib:gen_event(3)</c></seealso>.</p>
        <p><c><anno>Handler</anno></c> is typically the name of the callback module
          and <c><anno>Args</anno></c> is an optional term (defaults to []) passed
          to the initialization callback function <c><anno>Handler</anno>:init/1</c>.
          The function returns <c>ok</c> if successful.</p>
        <p>The event handler must be able to handle the events in this module, see
          section <seealso marker="#events">Events</seealso>.</p>
      </desc>
    </func>
    <func>
      <name name="delete_report_handler" arity="1"/>
      <fsummary>Delete an event handler from the error logger.</fsummary>
      <desc>
        <p>Deletes an event handler from the error logger by calling
          <c>gen_event:delete_handler(error_logger, <anno>Handler</anno>, [])</c>,
          see <seealso marker="stdlib:gen_event"><c>stdlib:gen_event(3)</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name name="error_msg" arity="1"/>
      <name name="error_msg" arity="2"/>
      <name name="format" arity="2"/>
      <fsummary>Send a standard error event to the error logger.</fsummary>
      <desc>
        <p>Sends a standard error event to the error logger.
          The <c><anno>Format</anno></c> and <c><anno>Data</anno></c> arguments
	  are the same as the arguments of
	  <seealso marker="stdlib:io#format/2"><c>io:format/2</c></seealso>
	  in <c>STDLIB</c>.
	  The event is handled by the standard event handler.</p>
	<p><em>Example:</em></p>
        <pre>
1> <input>error_logger:error_msg("An error occurred in ~p~n", [a_module]).</input>

=ERROR REPORT==== 11-Aug-2005::14:03:19 ===
An error occurred in a_module
ok</pre>
        <warning>
          <p>If called with bad arguments, this function can crash
            the standard event handler, meaning no further events are
            logged. When in doubt, use
	  <seealso marker="#error_report/1"><c>error_report/1</c></seealso>
	  instead.</p>
        </warning>
      </desc>
    </func>
    <func>
      <name name="error_report" arity="1"/>
      <fsummary>Send a standard error report event to the error logger.</fsummary>
      <desc>
        <p>Sends a standard error report event to the error logger.
          The event is handled by the standard event handler.</p>
	<p><em>Example:</em></p>
        <pre>
2> <input>error_logger:error_report([{tag1,data1},a_term,{tag2,data}]).</input>

=ERROR REPORT==== 11-Aug-2005::13:45:41 ===
    tag1: data1
    a_term
    tag2: data
ok
3> <input>error_logger:error_report("Serious error in my module").</input>

=ERROR REPORT==== 11-Aug-2005::13:45:49 ===
Serious error in my module
ok</pre>
      </desc>
    </func>
    <func>
      <name name="error_report" arity="2"/>
      <fsummary>Send a user-defined error report event to the error logger.</fsummary>
      <desc>
        <p>Sends a user-defined error report event to the error logger.
          An event handler to handle the event is supposed to have been
          added. The event is ignored by the standard event handler.</p>
        <p>It is recommended that <c><anno>Report</anno></c> follows the same
          structure as for
	<seealso marker="#error_report/1"><c>error_report/1</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name name="info_msg" arity="1"/>
      <name name="info_msg" arity="2"/>
      <fsummary>Send a standard information event to the error logger.</fsummary>
      <desc>
        <p>Sends a standard information event to the error logger.
          The <c><anno>Format</anno></c> and <c><anno>Data</anno></c> arguments
	  are the same as the arguments of
	  <seealso marker="stdlib:io#format/2"><c>io:format/2</c></seealso>
	  in <c>STDLIB</c>. The event is handled by the standard event handler.</p>
	<p><em>Example:</em></p>
        <pre>
1> <input>error_logger:info_msg("Something happened in ~p~n", [a_module]).</input>

=INFO REPORT==== 11-Aug-2005::14:06:15 ===
Something happened in a_module
ok</pre>
        <warning>
          <p>If called with bad arguments, this function can crash
            the standard event handler, meaning no further events are
            logged. When in doubt, use <c>info_report/1</c> instead.</p>
        </warning>
      </desc>
    </func>
    <func>
      <name name="info_report" arity="1"/>
      <fsummary>Send a standard information report event to the error logger.</fsummary>
      <desc>
        <p>Sends a standard information report event to the error
          logger. The event is handled by the standard event handler.</p>
	<p><em>Example:</em></p>
        <pre>
2> <input>error_logger:info_report([{tag1,data1},a_term,{tag2,data}]).</input>

=INFO REPORT==== 11-Aug-2005::13:55:09 ===
    tag1: data1
    a_term
    tag2: data
ok
3> <input>error_logger:info_report("Something strange happened").</input>

=INFO REPORT==== 11-Aug-2005::13:55:36 ===
Something strange happened
ok</pre>
      </desc>
    </func>
    <func>
      <name name="info_report" arity="2"/>
      <fsummary>Send a user-defined information report event to the error logger.</fsummary>
      <desc>
        <p>Sends a user-defined information report event to the error
          logger. An event handler to handle the event is supposed to
          have been added. The event is ignored by the standard event
          handler.</p>
        <p>It is recommended that <c><anno>Report</anno></c> follows the same
          structure as for
	<seealso marker="#info_report/1"><c>info_report/1</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name name="logfile" arity="1" clause_i="1"/>
      <name name="logfile" arity="1" clause_i="2"/>
      <name name="logfile" arity="1" clause_i="3"/>
      <fsummary>Enable or disable error printouts to a file.</fsummary>
      <type variable="Filename"/>
      <type variable="OpenReason" name_i="1"/>
      <type variable="CloseReason" name_i="2"/>
      <type variable="FilenameReason" name_i="3"/>
      <type name="open_error"/>
      <desc>
        <p>Enables or disables printout of standard events to a file.</p>
        <p>This is done by adding or deleting the standard event handler
          for output to file. Thus, calling this function overrides
          the value of the <c>Kernel</c> <c>error_logger</c> configuration
          parameter.</p>
        <p>Enabling file logging can be used together with calling
          <c>tty(false)</c>, to have a silent system where
          all standard events are logged to a file only.
          Only one log file can be active at a time.</p>
        <p><c>Request</c> is one of the following:</p>
        <taglist>
          <tag><c>{open, <anno>Filename</anno>}</c></tag>
          <item>
            <p>Opens log file <c><anno>Filename</anno></c>. Returns <c>ok</c> if
              successful, or <c>{error, allready_have_logfile}</c> if
              logging to file is already enabled, or an error tuple if
              another error occurred (for example, if <c><anno>Filename</anno></c>
              cannot be opened).</p>
          </item>
          <tag><c>close</c></tag>
          <item>
            <p>Closes the current log file. Returns <c>ok</c>, or
              <c>{error, module_not_found}</c>.</p>
          </item>
          <tag><c>filename</c></tag>
          <item>
            <p>Returns the name of the log file <c><anno>Filename</anno></c>, or
              <c>{error, no_log_file}</c> if logging to file is not
              enabled.</p>
          </item>
        </taglist>
      </desc>
    </func>
    <func>
      <name name="tty" arity="1"/>
      <fsummary>Enable or disable printouts to the terminal.</fsummary>
      <desc>
        <p>Enables (<c><anno>Flag</anno> == true</c>) or disables
          (<c><anno>Flag</anno> == false</c>) printout of standard events
	  to the terminal.</p>
        <p>This is done by adding or deleting the standard event handler
          for output to the terminal. Thus, calling this function overrides
          the value of the <c>Kernel</c> <c>error_logger</c> configuration parameter.</p>
      </desc>
    </func>
    <func>
      <name name="warning_map" arity="0"/>
      <fsummary>Return the current mapping for warning events.</fsummary>
      <desc>
        <p>Returns the current mapping for warning events. Events sent
          using <c>warning_msg/1,2</c> or <c>warning_report/1,2</c>
          are tagged as errors, warnings (default), or info, depending
          on the value of command-line flag <c>+W</c>.</p>
	<p><em>Example:</em></p>
        <pre>
os$ <input>erl</input>
Erlang (BEAM) emulator version 5.4.8 [hipe] [threads:0] [kernel-poll]

Eshell V5.4.8  (abort with ^G)
1> <input>error_logger:warning_map().</input>
warning
2> <input>error_logger:warning_msg("Warnings tagged as: ~p~n", [warning]).</input>

=WARNING REPORT==== 11-Aug-2005::15:31:55 ===
Warnings tagged as: warning
ok
3>
User switch command
 --> q
os$ <input>erl +W e</input>
Erlang (BEAM) emulator version 5.4.8 [hipe] [threads:0] [kernel-poll]

Eshell V5.4.8  (abort with ^G)
1> <input>error_logger:warning_map().</input>
error
2> <input>error_logger:warning_msg("Warnings tagged as: ~p~n", [error]).</input>

=ERROR REPORT==== 11-Aug-2005::15:31:23 ===
Warnings tagged as: error
ok</pre>
      </desc>
    </func>
    <func>
      <name name="warning_msg" arity="1"/>
      <name name="warning_msg" arity="2"/>
      <fsummary>Send a standard warning event to the error logger.</fsummary>
      <desc>
        <p>Sends a standard warning event to the error logger.
          The <c><anno>Format</anno></c> and <c><anno>Data</anno></c> arguments
	  are the same as the arguments of
	  <seealso marker="stdlib:io#format/2"><c>io:format/2</c></seealso>
	  in <c>STDLIB</c>.
	  The event is handled by the standard event handler. It is tagged
	  as an error, warning, or info, see
          <seealso marker="#warning_map/0"><c>warning_map/0</c></seealso>.</p>
        <warning>
          <p>If called with bad arguments, this function can crash
            the standard event handler, meaning no further events are
            logged. When in doubt, use <c>warning_report/1</c> instead.</p>
        </warning>
      </desc>
    </func>
    <func>
      <name name="warning_report" arity="1"/>
      <fsummary>Send a standard warning report event to the error logger.</fsummary>
      <desc>
        <p>Sends a standard warning report event to the error logger.
          The event is handled by the standard event handler. It is
          tagged as an error, warning, or info, see
          <seealso marker="#warning_map/0"><c>warning_map/0</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name name="warning_report" arity="2"/>
      <fsummary>Send a user-defined warning report event to the error logger.</fsummary>
      <desc>
        <p>Sends a user-defined warning report event to the error
          logger. An event handler to handle the event is supposed to
          have been added. The event is ignored by the standard event
          handler. It is tagged as an error, warning, or info,
          depending on the value of
          <seealso marker="#warning_map/0"><c>warning_map/0</c></seealso>.</p>
      </desc>
    </func>
  </funcs>

  <section>
    <marker id="events"></marker>
    <title>Events</title>
    <p>All event handlers added to the error logger must handle
      the following events. <c>Gleader</c> is the group leader pid of
      the process that sent the event, and <c>Pid</c> is the process
      that sent the event.</p>
    <taglist>
      <tag><c>{error, Gleader, {Pid, Format, Data}}</c></tag>
      <item>
        <p>Generated when <c>error_msg/1,2</c> or <c>format</c> is
          called.</p>
      </item>
      <tag><c>{error_report, Gleader, {Pid, std_error, Report}}</c></tag>
      <item>
        <p>Generated when <c>error_report/1</c> is called.</p>
      </item>
      <tag><c>{error_report, Gleader, {Pid, Type, Report}}</c></tag>
      <item>
        <p>Generated when <c>error_report/2</c> is called.</p>
      </item>
      <tag><c>{warning_msg, Gleader, {Pid, Format, Data}}</c></tag>
      <item>
        <p>Generated when <c>warning_msg/1,2</c> is called
          if warnings are set to be tagged as warnings.</p>
      </item>
      <tag><c>{warning_report, Gleader, {Pid, std_warning, Report}}</c></tag>
      <item>
        <p>Generated when <c>warning_report/1</c> is called
          if warnings are set to be tagged as warnings.</p>
      </item>
      <tag><c>{warning_report, Gleader, {Pid, Type, Report}}</c></tag>
      <item>
        <p>Generated when <c>warning_report/2</c> is called
          if warnings are set to be tagged as warnings.</p>
      </item>
      <tag><c>{info_msg, Gleader, {Pid, Format, Data}}</c></tag>
      <item>
        <p>Generated when <c>info_msg/1,2</c> is called.</p>
      </item>
      <tag><c>{info_report, Gleader, {Pid, std_info, Report}}</c></tag>
      <item>
        <p>Generated when <c>info_report/1</c> is called.</p>
      </item>
      <tag><c>{info_report, Gleader, {Pid, Type, Report}}</c></tag>
      <item>
        <p>Generated when <c>info_report/2</c> is called.</p>
      </item>
    </taglist>
    <p>Notice that some system-internal events can also be
      received. Therefore a catch-all clause last in the definition of
      the event handler callback function <c>Module:handle_event/2</c>
      is necessary. This also applies for
      <c>Module:handle_info/2</c>, as the event handler must also take care of
      some system-internal messages.</p>
  </section>
  <section>
    <title>See Also</title>
    <p><seealso marker="stdlib:gen_event"><c>stdlib:gen_event(3)</c></seealso>,
       <seealso marker="stdlib:log_mf_h"><c>stdlib:log_mf_h(3)</c></seealso>
       <seealso marker="kernel_app"><c>kernel(6)</c></seealso>
       <seealso marker="sasl:sasl_app"><c>sasl(6)</c></seealso></p>
  </section>
</erlref>