path: root/lib/mnesia/doc/src/Mnesia_chap3.xml

<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">

<chapter>
  <header>
    <copyright>
      <year>1997</year><year>2009</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      The contents of this file are subject to the Erlang Public License,
      Version 1.1, (the "License"); you may not use this file except in
      compliance with the License. You should have received a copy of the
      Erlang Public License along with this software. If not, it can be
      retrieved online at http://www.erlang.org/.
    
      Software distributed under the License is distributed on an "AS IS"
      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
      the License for the specific language governing rights and limitations
      under the License.
    
    </legalnotice>

    <title>Building A Mnesia Database</title>
    <prepared></prepared>
    <responsible></responsible>
    <docno></docno>
    <approved></approved>
    <checked></checked>
    <date></date>
    <rev></rev>
    <file>Mnesia_chap3.xml</file>
  </header>
  <p>This chapter details the basic steps involved when designing
    a Mnesia database and the programming constructs which make different
    solutions available to the programmer. The chapter includes the following
    sections:
    </p>
  <list type="bulleted">
    <item>defining a schema</item>
    <item>the datamodel</item>
    <item>starting Mnesia</item>
    <item>creating new tables.</item>
  </list>

  <section>
    <marker id="def_schema"></marker>
    <title>Defining a Schema</title>
    <p>The configuration of a Mnesia system is described in the
      schema. The schema is a special table which contains information
      such as the table names and each table's
      storage type, (i.e. whether a table should be stored in RAM,
      on disc or possibly on both, as well as its location).
      </p>
    <p>Unlike data tables, information contained in schema tables can only be
      accessed and modified by using the schema related functions
      described in this section. 
      </p>
    <p>Mnesia has various functions for defining the
      database schema. It is possible to move tables, delete tables,
      or reconfigure the layout of tables.
      </p>
    <p>An important aspect of these functions is that the system can access a
      table while it is being reconfigured. For example, it is possible to move a
      table and simultaneously perform write operations to the same
      table. This feature is  essential for applications that require
      continuous service.
      </p>
    <p>The following section describes the functions available for schema management,
      all of which return a tuple:
      </p>
    <list type="bulleted">
      <item><c>{atomic, ok}</c>; or,
      </item>
      <item><c>{aborted, Reason}</c> if unsuccessful.</item>
    </list>

    <section>
      <title>Schema Functions</title>
      <list type="bulleted">
        <item><c>mnesia:create_schema(NodeList)</c>.  This function is
         used to initialize a new, empty schema. This is a mandatory
         requirement before Mnesia can be started. Mnesia is a truly
         distributed DBMS and the schema is a system table that is
         replicated on all nodes in a Mnesia system.
         The function will  fail if a schema is already present on any of
         the nodes in <c>NodeList</c>. This function requires Mnesia
         to be stopped on the all
        <c>db_nodes</c> contained in the parameter <c>NodeList</c>.
         Applications call this function only once,
         since it is usually a one-time activity to initialize a new
         database.
        </item>
        <item><c>mnesia:delete_schema(DiscNodeList)</c>. This function
         erases any old schemas on the nodes in
        <c>DiscNodeList</c>. It also removes all old tables together
         with all data. This function requires Mnesia to be stopped
         on all <c>db_nodes</c>.
        </item>
        <item><c>mnesia:delete_table(Tab)</c>. This function
         permanently deletes all replicas of table <c>Tab</c>.
        </item>
        <item><c>mnesia:clear_table(Tab)</c>. This function
         permanently deletes all entries in table <c>Tab</c>.
        </item>
        <item><c>mnesia:move_table_copy(Tab, From, To)</c>. This
         function moves the copy of table <c>Tab</c> from node
        <c>From</c> to node <c>To</c>. The table storage type,
        <c>{type}</c> is preserved, so if a RAM table is moved from
         one node to another node, it remains a RAM table on the new
         node. It is still possible for other transactions to perform
         read and write operation to the table while it is being
         moved.
        </item>
        <item><c>mnesia:add_table_copy(Tab, Node, Type)</c>. This
         function creates a replica of the table <c>Tab</c> at node
        <c>Node</c>. The <c>Type</c> argument must be either of the
         atoms <c>ram_copies</c>, <c>disc_copies</c>, or
        <c>disc_only_copies</c>. If we add a copy of the system
         table <c>schema</c> to a node, this means that we want the
         Mnesia schema to reside there as well. This action then
         extends the set of nodes that comprise this particular
         Mnesia system.
        </item>
        <item><c>mnesia:del_table_copy(Tab, Node)</c>. This function
         deletes the replica of table <c>Tab</c> at node <c>Node</c>.
         When the last replica of a  table is removed, the table is
         deleted.
        </item>
        <item>
          <p><c>mnesia:transform_table(Tab, Fun, NewAttributeList, NewRecordName)</c>. This
            function changes the format on all records in table
            <c>Tab</c>. It applies the argument <c>Fun</c> to all
            records in the table. <c>Fun</c> shall be a function which
            takes an record of the old type, and returns the record of the new
            type. The table key may not be changed.</p>
          <code type="none">
-record(old, {key, val}).
-record(new, {key, val, extra}). 

Transformer = 
   fun(X) when record(X, old) ->
      #new{key = X#old.key,
           val = X#old.val,
           extra = 42}
   end,
{atomic, ok} = mnesia:transform_table(foo, Transformer, 
                                      record_info(fields, new), 
                                      new),
          </code>
          <p>The <c>Fun</c> argument can also be the atom
            <c>ignore</c>, it indicates that only the meta data about the table will
            be updated. Usage of <c>ignore</c> is not recommended (since it creates
            inconsistencies between the meta data and the actual data) but included
            as a possibility for the user do to his own (off-line) transform.</p>
        </item>
        <item><c>change_table_copy_type(Tab, Node, ToType)</c>. This
         function changes the storage type of a table. For example, a
         RAM table is changed to a disc_table at the node specified
         as <c>Node</c>.</item>
      </list>
    </section>
  </section>

  <section>
    <title>The Data Model</title>
    <p>The data model employed by Mnesia is an extended 
      relational data model. Data is organized as a set of 
      tables and relations between different data records can
      be modeled as additional tables describing the actual 
      relationships.
      Each table contains instances of Erlang records
      and records are represented as Erlang tuples.
      </p>
    <p>Object identifiers, also known as oid, are made up of a table name and a key.
      For example, if we have an employee record represented by the tuple
      <c>{employee, 104732, klacke, 7, male, 98108, {221, 015}}</c>.
      This record has an object id, (Oid) which is the tuple
      <c>{employee, 104732}</c>. 
      </p>
    <p>Thus, each table is made up of records, where the first element
      is a record name and the second element of the table is a key
      which identifies the particular record in that table. The
      combination of the table name and a key,  is an arity two tuple
      <c>{Tab, Key}</c> called  the Oid. See  Chapter 4:<seealso marker="Mnesia_chap4#recordnames_tablenames">Record Names Versus Table Names</seealso>, for more information
      regarding the relationship between the record name and the table
      name.
      </p>
    <p>What makes the Mnesia data model an extended relational model
      is the ability to store arbitrary Erlang terms in the attribute
      fields. One attribute value could for example be a whole tree of
      oids leading to other terms in other tables.  This 
      type of record is hard to model in traditional relational 
      DBMSs.</p>
  </section>

  <section>
    <marker id="start_mnesia"></marker>
    <title>Starting Mnesia</title>
    <p>Before we can start Mnesia, we must initialize an empty schema
      on all the participating nodes.
      </p>
    <list type="bulleted">
      <item>The Erlang system must be started.
      </item>
      <item>Nodes with disc database schema must be defined and
       implemented with the function <c>create_schema(NodeList).</c></item>
    </list>
    <p>When running a distributed system, with two or more
      participating nodes, then the <c>mnesia:start( ).</c> function
      must be executed on each participating node. Typically this would
      be part of the boot script in an embedded environment.
      In a test environment or an interactive environment,
      <c>mnesia:start()</c> can also be used either from the
      Erlang shell, or another program. 
      </p>

    <section>
      <title>Initializing a Schema and Starting Mnesia</title>
      <p>To use a known example, we illustrate how to run the
        Company database described in Chapter 2 on two separate nodes,
        which we call <c>a@gin</c> and <c>b@skeppet</c>. Each of these
        nodes must have have a Mnesia directory as well as an
        initialized schema before Mnesia can be started. There are two
        ways to specify the Mnesia directory to be used: 
        </p>
      <list type="bulleted">
        <item>
          <p>Specify the Mnesia directory by providing an application
            parameter either when starting the Erlang shell or in the
            application script. Previously the following example was used
            to create the directory for our Company database:</p>
          <pre>
%<input>erl -mnesia dir '"/ldisc/scratch/Mnesia.Company"'</input>
          </pre>
        </item>
        <item>If no command line flag is entered, then the Mnesia
         directory will be the current working directory on the node
         where the Erlang shell is started.</item>
      </list>
      <p>To start our Company database and get it running on the two
        specified nodes, we enter the following commands:
        </p>
      <list type="ordered">
        <item>
          <p>On the node called gin:</p>
          <pre>
 gin %<input>erl -sname a  -mnesia dir '"/ldisc/scratch/Mnesia.company"'</input>
          </pre>
        </item>
        <item>
          <p>On the node called skeppet:</p>
          <pre>
skeppet %<input>erl -sname b -mnesia dir '"/ldisc/scratch/Mnesia.company"'</input>
          </pre>
        </item>
        <item>
          <p>On one of the two nodes:</p>
          <pre>
(a@gin1)><input>mnesia:create_schema([a@gin, b@skeppet]).</input>
          </pre>
        </item>
        <item>The function <c>mnesia:start()</c>  is called on both
         nodes.
        </item>
        <item>
          <p>To initialize the database, execute the following
            code on one of the two nodes.</p>
          <codeinclude file="company.erl" tag="%12" type="erl"></codeinclude>
        </item>
      </list>
      <p>As illustrated above, the two directories reside on different nodes, because the
        <c>/ldisc/scratch</c> (the "local" disc) exists on the two different
        nodes.
        </p>
      <p>By executing these commands we have configured two Erlang
        nodes to run the Company database, and therefore, initialize the
        database. This  is required only once when setting up, the next time the
        system is started <c>mnesia:start()</c> is called
        on both nodes, to initialize the system from disc.
        </p>
      <p>In a system of Mnesia nodes, every node is aware of the
        current location of all tables. In this example, data is
        replicated on both nodes and functions which manipulate the
        data in our tables can be executed on either of the two nodes.
        Code which manipulate Mnesia data behaves identically
        regardless of where the data resides.
        </p>
      <p>The function <c>mnesia:stop()</c> stops Mnesia on the node
        where the function is executed. Both the <c>start/0</c> and
        the <c>stop/0</c> functions work on the "local" Mnesia system,
        and there are no functions which start or stop a set of nodes.
        </p>
    </section>

    <section>
      <title>The Start-Up Procedure</title>
      <p>Mnesia is started by calling the following function:
        </p>
      <code type="none">
          mnesia:start().
      </code>
      <p>This function initiates the DBMS locally.  </p>
      <p>The choice of configuration will alter the location and load
        order of the tables. The alternatives are listed below:        <br></br>
</p>
      <list type="ordered">
        <item>Tables that are stored locally only, are initialized
         from the local Mnesia directory. 
        </item>
        <item>Replicated tables that  reside locally
         as  well as somewhere else are either initiated from disc or
         by copying the entire table from the other node depending on
         which of the different replicas is the most recent. Mnesia
         determines  which of the tables is the most recent.
        </item>
        <item>Tables that reside on remote nodes are available to other nodes as soon
         as they are loaded.</item>
      </list>
      <p>Table initialization is asynchronous, the function
        call <c>mnesia:start()</c> returns the atom <c>ok</c> and
        then starts to initialize the different tables. Depending on
        the size of the database, this may take some time, and the
        application programmer must wait for the tables that the
        application needs before they can be used. This achieved by using
        the function:</p>
      <list type="bulleted">
        <item><c>mnesia:wait_for_tables(TabList, Timeout)</c></item>
      </list>
      <p>This function suspends the caller until all tables
        specified in <c>TabList</c> are properly initiated. 
        </p>
      <p>A problem can arise if  a replicated table on one node is
        initiated, but Mnesia deduces that another (remote)
        replica is more recent than the replica existing on
        the local node, the initialization procedure  will not proceed.
        In this situation, a call to to
        <c>mnesia:wait_for_tables/2</c> suspends the caller until the
        remote node has initiated the table from its local disc  and
        the node has copied the table over the network to the local node. 
        </p>
      <p>This procedure can be time consuming however, the shortcut function 
        shown below will load all the tables from disc at a faster rate:
        </p>
      <list type="bulleted">
        <item><c>mnesia:force_load_table(Tab)</c>. This function forces
         tables to be loaded from disc regardless of the network
         situation.</item>
      </list>
      <p>Thus, we can assume that if an application
        wishes to use tables <c>a</c> and <c>b</c>, then the
        application must perform some action similar to the below code before it can utilize the tables.
        </p>
      <pre>
          case mnesia:wait_for_tables([a, b], 20000) of
            {timeout,   RemainingTabs} ->
              panic(RemainingTabs);
            ok ->
              synced
          end.
      </pre>
      <warning>
        <p>When tables are forcefully loaded from the local disc,
          all operations that were performed on the replicated table
          while the local node was down, and the remote replica was
          alive, are lost. This can cause the database to become
          inconsistent.</p>
      </warning>
      <p>If the start-up procedure fails, the
        <c>mnesia:start()</c> function returns the cryptic tuple 
        <c>{error,{shutdown, {mnesia_sup,start,[normal,[]]}}}</c>.
        Use command line arguments  -boot start_sasl as argument to
        the erl script in order to get  more information
        about the start failure. 
        </p>
    </section>
  </section>

  <section>
    <marker id="create_tables"></marker>
    <title>Creating New Tables</title>
    <p>Mnesia provides one function to create new tables. This
      function is: <c>mnesia:create_table(Name, ArgList).</c></p>
    <p>When executing this function, it returns one of the following
      responses:
      </p>
    <list type="bulleted">
      <item><c>{atomic, ok}</c> if the function executes
       successfully
      </item>
      <item><c>{aborted, Reason}</c> if the function fails.
      </item>
    </list>
    <p>The function arguments are:
      </p>
    <list type="bulleted">
      <item><c>Name</c> is the atomic name of the table. It is
       usually  the same name as the name of the records that
       constitute the table. (See <c>record_name</c> for more
       details.)
      </item>
      <item>
        <p><c>ArgList</c> is a list of <c>{Key,Value}</c> tuples.
          The following arguments are valid:
          </p>
        <list type="bulleted">
          <item>
            <p><c>{type, Type}</c> where <c>Type</c> must be either of the
              atoms <c>set</c>, <c>ordered_set</c> or <c>bag</c>. 
              The default value is
              <c>set</c>. Note: currently 'ordered_set' 
              is not supported for 'disc_only_copies' tables.
              A table of type <c>set</c> or <c>ordered_set</c> has either zero or
              one record per key.  Whereas a table of type <c>bag</c> can
              have an arbitrary number of records per key. The key for
              each record is always the first attribute of the record.</p>
            <p>The following example illustrates the difference between
              type <c>set</c> and <c>bag</c>: </p>
            <pre>
 f() -> F =  fun() ->
\011      mnesia:write({foo, 1, 2}), mnesia:write({foo, 1, 3}),
\011      mnesia:read({foo, 1}) end, mnesia:transaction(F).             </pre>
            <p>This transaction will return the list <c>[{foo,1,3}]</c> if
              the <c>foo</c> table is of type <c>set</c>.  However, list
              <c>[{foo,1,2}, {foo,1,3}]</c> will return if the table is
              of  type <c>bag</c>. Note the use of <c>bag</c> and
              <c>set</c> table types. </p>
            <p>Mnesia tables can never contain
              duplicates of the same record in the same table.  Duplicate
              records have attributes with the same contents and key. 
              </p>
          </item>
          <item>
            <p><c>{disc_copies, NodeList}</c>, where <c>NodeList</c> is a
              list of the nodes where this table will reside on disc.</p>
            <p>Write operations to a table replica of type
              <c>disc_copies</c> will write data to the disc copy as well
              as to the RAM copy of the table. </p>
            <p>It is possible to have a
              replicated table of type <c>disc_copies</c> on one node, and
              the same table stored as a different type on another node.
              The default value is <c>[]</c>. This arrangement is
              desirable if we want the following operational
              characteristics are required:</p>
            <list type="ordered">
              <item>read operations must be very fast and performed in RAM
              </item>
              <item>all write operations must be written to persistent
               storage.</item>
            </list>
            <p>A write operation on a <c>disc_copies</c> table
              replica will be performed in two steps. First the write
              operation is appended to a log file, then the actual
              operation is performed in RAM.
              </p>
          </item>
          <item>
            <p><c>{ram_copies, NodeList}</c>, where <c>NodeList</c> is a
              list of the nodes where this table is stored in RAM. The
              default value for <c>NodeList</c>  is <c>[node()]</c>. If the
              default value is used to create a new table, it will be
              located on the local node only. </p>
            <p>Table replicas of type
              <c>ram_copies</c> can be dumped to disc with the function
              <c>mnesia:dump_tables(TabList)</c>.
              </p>
          </item>
          <item><c>{disc_only_copies, NodeList}</c>. These table
           replicas are stored on disc only and are therefore slower to
           access. However, a disc only replica consumes less memory than
           a table replica of the other two storage types. 
          </item>
          <item><c>{index, AttributeNameList}</c>, where
          <c>AttributeNameList</c> is a list of atoms specifying the
           names of the attributes Mnesia shall build and maintain. An
           index  table will exist for every element in the list.  The
           first field of a Mnesia record is the key and thus need no
           extra index. 
                    <br></br>
The first field of a record is the second element of the
           tuple, which is the representation of the record.  
          </item>
          <item><c>{snmp, SnmpStruct}</c>. <c>SnmpStruct</c> is
           described in the SNMP User Guide. Basically, if this attribute
           is present in  <c>ArgList</c> of <c>mnesia:create_table/2</c>,
           the table is immediately accessible by means of the Simple
           Network Management Protocol (SNMP). 
                    <br></br>
It is easy to design applications which use SNMP to
           manipulate and control the system. Mnesia provides a direct
           mapping between the logical tables that make up an SNMP
           control application and the physical data which make up a
           Mnesia table. <c>[]</c>
           is default.
          </item>
          <item><c>{local_content, true}</c> When an application needs  a
           table  whose contents  should  be  locally unique on each
           node,
          <c>local_content</c>  tables may be used. The name of the
           table  is  known  to all  Mnesia  nodes,  but its contents is
           unique for each node. Access to this type of table must  be
           done locally. </item>
          <item>
            <p><c>{attributes, AtomList}</c> is a list of the attribute
              names for the records that are supposed to populate the
              table. The default value is the list <c>[key, val]</c>. The
              table must at least have one extra attribute besides the
              key. When accessing single attributes in a record, it is not
              recommended to hard code the attribute names as atoms. Use
              the construct <c>record_info(fields,record_name)</c>
              instead. The expression
              <c>record_info(fields,record_name)</c> is processed by the
              Erlang macro pre-processor and returns a list of the
              record's field names. With the record definition
              <c>-record(foo, {x,y,z}).</c> the expression
              <c>record_info(fields,foo)</c> is expanded to the list
              <c>[x,y,z]</c>. Accordingly, it is possible to provide the
              attribute names yourself, or to use the <c>record_info/2</c>
              notation.  </p>
            <p>It is recommended that
              the <c>record_info/2</c> notation be used  as it is easier to
              maintain the program and it will be more robust with regards
              to future record changes.
              </p>
          </item>
          <item>
            <p><c>{record_name, Atom}</c> specifies the common name of
              all records stored in the table. All records, stored in
              the table, must have this name as their first element.
              The <c>record_name</c> defaults to the name of the
              table. For more information see  Chapter 4:<seealso marker="Mnesia_chap4#recordnames_tablenames">Record Names Versus Table Names</seealso>.</p>
          </item>
        </list>
      </item>
    </list>
    <p>As an example, assume we have the record definition:</p>
    <pre>
      -record(funky, {x, y}).
    </pre>
    <p>The below call would create a table which is replicated on two
      nodes, has an additional index on the <c>y</c> attribute, and is
      of type
      <c>bag</c>.</p>
    <pre>
      mnesia:create_table(funky, [{disc_copies, [N1, N2]}, {index,
      [y]}, {type, bag}, {attributes, record_info(fields, funky)}]).
    </pre>
    <p>Whereas a call to the below default code values: </p>
    <pre>
mnesia:create_table(stuff, [])    </pre>
    <p>would return a table with a RAM copy on the
      local node, no additional indexes and the attributes defaulted to
      the list <c>[key,val]</c>.</p>
  </section>
</chapter>