path: root/lib/observer/doc/src/ttb_ug.xml

<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">

<chapter>
  <header>
    <copyright>
      <year>2002</year><year>2009</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      The contents of this file are subject to the Erlang Public License,
      Version 1.1, (the "License"); you may not use this file except in
      compliance with the License. You should have received a copy of the
      Erlang Public License along with this software. If not, it can be
      retrieved online at http://www.erlang.org/.
    
      Software distributed under the License is distributed on an "AS IS"
      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
      the License for the specific language governing rights and limitations
      under the License.
    
    </legalnotice>

    <title>Trace Tool Builder</title>
    <prepared></prepared>
    <docno></docno>
    <date></date>
    <rev></rev>
    <file>ttb_ug.xml</file>
  </header>

  <section>
    <title>Introduction</title>
    <p>The Trace Tool Builder is a base for building trace tools for
      single node or distributed erlang systems. It requires the
      <c>runtime_tools</c> application to be available on the traced
      node.
      </p>
    <p>The main features of the Trace Tool Builder are:</p>
    <list type="bulleted">
      <item>Start tracing to file ports on several nodes with one
       function call.</item>
      <item>Write additional information to a trace information file,
       which is read during formatting.</item>
      <item>Restoring of previous configuration by maintaining a
       history buffer and handling configuration files.</item>
      <item>Some simple support for sequential tracing.</item>
      <item>Formatting of binary trace logs and merging of logs from
       multiple nodes.</item>
    </list>
    <p>Even though the intention of the Trace Tool Builder is to serve
      as a base for tailor made trace tools, it is of course possible
      to use it directly from the erlang shell. The application only
      allows the use of file port tracer, so if you would like would
      like to use other types of trace clients you will be better off
      using <c>dbg</c> directly instead.</p>
  </section>

  <section>
    <title>Getting Started</title>
    <p>The <c>ttb</c> module is the interface to all functions in the
      Trace Tool Builder. To get started the least you need to do is to
      start a tracer with <c>ttb:tracer/0/1/2</c>, and set the required
      trace flags on the processes you want to trace with
      <c>ttb:p/2</c>. Then, when the tracing is completed, you must stop
      the tracer with <c>ttb:stop/0/1</c> and format the trace log with
      <c>ttb:format/1/2</c>.
      </p>
    <p><c>ttb:tracer/0/1/2</c> opens a file trace port on each node
      that shall be traced. All trace messages will be written to this
      port and end up in a binary file (the binary trace log).
      </p>
    <p><c>ttb:p/2</c> specifies which processes that shall be
      traced. Trace flags given in this call specifies what to trace on
      each process. You can call this function several times if you like
      different trace flags to be set on different processes.
      </p>
    <p>If you want to trace function calls (i.e. if you have the
      <c>call</c> trace flag set on any of your processes), you must
      also set trace patterns on the required function(s) with
      <c>ttb:tp</c> or <c>ttb:tpl</c>. A function is only traced if it
      has a trace pattern. The trace pattern specifies how to trace the
      function by using match specifications. Match specifications are
      described in the User's Guide for the erlang runtime system
      <c>erts</c>.
      </p>
    <p><c>ttb:stop/0/1</c> stops tracing on all nodes, deletes all
      trace patterns and flushes the trace port buffer.
      </p>
    <p><c>ttb:format/1/2</c> translates the binary trace logs into
      something readable. By default <c>ttb</c> presents each trace
      message as a line of text, but you can also write your own handler
      to make more complex interpretations of the trace information. A
      trace log can even be presented graphically via the Event Tracer
      application. Note that if you give the <c>format</c> option to
      <c>ttb:stop/1</c> the formatting is automatically done when
      stopping <c>ttb</c>.
      </p>

    <section>
      <title>Example: Tracing the local node from the erlang shell</title>
      <p>This small module is used in the example:</p>
      <code type="none">
-module(m).
-export([f/0]).
f() ->
   receive 
      From when pid(From) -> 
         Now = erlang:now(),
         From ! {self(),Now}
   end.      </code>
      <p>The following example shows the basic use of <c>ttb</c> from
        the erlang shell. Default options are used both for starting the
        tracer and for formatting. This gives a trace log named
        <c>Node-ttb</c>, where <c>Node</c> is the name of the node.  The
        default handler prints the formatted trace messages in the
        shell.</p>
      <code type="none"><![CDATA[
(tiger@durin)47> %% First I spawn a process running my test function
(tiger@durin)47> Pid = spawn(m,f,[]).
<0.125.0>
(tiger@durin)48> 
(tiger@durin)48> %% Then I start a tracer...
(tiger@durin)48> ttb:tracer().
{ok,[tiger@durin]}
(tiger@durin)49> 
(tiger@durin)49> %% and activate the new process for tracing
(tiger@durin)49> %% function calls and sent messages.
(tiger@durin)49> ttb:p(Pid,[call,send]).
{ok,[{<0.125.0>,[{matched,tiger@durin,1}]}]}
(tiger@durin)50> 
(tiger@durin)50> %% Here I set a trace pattern on erlang:now/0
(tiger@durin)50> %% The trace pattern is a simple match spec
(tiger@durin)50> %% generated by dbg:fun2ms/1. It indicates that 
(tiger@durin)50> %% the return value shall be traced.
(tiger@durin)50> MS = dbg:fun2ms(fun(_) -> return_trace() end).
[{'_',[],[{return_trace}]}]
(tiger@durin)51> ttb:tp(erlang,now,MS).
{ok,[{matched,tiger@durin,1},{saved,1}]}
(tiger@durin)52> 
(tiger@durin)52> %% I run my test (i.e. send a message to
(tiger@durin)52> %% my new process)
(tiger@durin)52> Pid ! self().
<0.72.0>
(tiger@durin)53> 
(tiger@durin)53> %% And then I have to stop ttb in order to flush
(tiger@durin)53> %% the trace port buffer
(tiger@durin)53> ttb:stop().
stopped
(tiger@durin)54> 
(tiger@durin)54> %% Finally I format my trace log
(tiger@durin)54> ttb:format("tiger@durin-ttb").
({<0.125.0>,{m,f,0},tiger@durin}) call erlang:now()
({<0.125.0>,{m,f,0},tiger@durin}) returned from erlang:now/0 ->
{1031,133451,667611}
({<0.125.0>,{m,f,0},tiger@durin}) <0.72.0> ! 
{<0.125.0>,{1031,133451,667611}}
ok      ]]></code>
    </section>

    <section>
      <title>Example: Build your own tool</title>
      <p>This small example shows a simple tool for "debug tracing",
        i.e. tracing of function calls with return values.</p>
      <code type="none"><![CDATA[
-module(mydebug).
-export([start/0,trc/1,stop/0,format/1]).
-export([print/4]).

%% Include ms_transform.hrl so that I can use dbg:fun2ms/2 to
%% generate match specifications.
-include_lib("stdlib/include/ms_transform.hrl").

%%% -------------Tool API-------------
%%% ----------------------------------
%%% Star the "mydebug" tool
start() ->
    %% The options specify that the binary log shall be named
    %% <Node>-debug_log and that the print/4 function in this
    %% module shall be used as format handler
    ttb:tracer(all,[{file,"debug_log"},{handler,{{?MODULE,print},0}}]),
    %% All processes (existing and new) shall trace function calls
    %% and include a timestamp in each trace message
    ttb:p(all,[call,timestamp]).

%%% Set trace pattern on function(s)
trc(M) when atom(M) ->
    trc({M,'_','_'});
trc({M,F}) when atom(M), atom(F) ->
    trc({M,F,'_'});
trc({M,F,_A}=MFA) when atom(M), atom(F) ->
    %% This match spec specifies that return values shall 
    %% be traced. NOTE that ms_transform.hrl must be included
    %% if dbg:fun2ms/1 shall be used!
    MatchSpec = dbg:fun2ms(fun(_) -> return_trace() end),
    ttb:tpl(MFA,MatchSpec).

%%% Format a binary trace log
format(File) ->
    ttb:format(File).

%%% Stop the "mydebug" tool
stop() ->
    ttb:stop().

%%% --------Internal functions--------
%%% ----------------------------------
%%% Format handler
print(_Out,end_of_trace,_TI,N) ->
    N;
print(Out,Trace,_TI,N) ->
    do_print(Out,Trace,N),
    N+1.

do_print(Out,{trace_ts,P,call,{M,F,A},Ts},N) ->
    io:format(Out,
              "~w: ~w, ~w:~n"
              "Call      : ~w:~w/~w~n"
              "Arguments :~p~n~n",
              [N,Ts,P,M,F,length(A),A]);
do_print(Out,{trace_ts,P,return_from,{M,F,A},R,Ts},N) ->
    io:format(Out,
              "~w: ~w, ~w:~n"
              "Return from  : ~w:~w/~w~n"
              "Return value :~p~n~n",
              [N,Ts,P,M,F,A,R]).      ]]></code>
      <p>To distinguish trace logs produced with this tool from other
        logs, the <c>file</c> option is used in <c>tracer/2</c>. The
        logs will therefore be named <c>Node-debug_log</c>, where
        <c>Node</c> is the name of the node where the log is produced.
        </p>
      <p>By using the <c>handler</c> option when starting the tracer,
        the information about how to format the file is stored in the
        trace information file (<c>.ti</c>). This is not necessary, as
        it might be given at the time of formatting instead. It can
        however be useful if you e.g. want to automatically format your
        trace logs by using the <c>format</c> option in
        <c>ttb:stop/1</c>. It also means that you don't need any
        knowledge of the content of a binary log to be able to format it
        the way it was intended. If the <c>handler</c> option is given
        both when starting the tracer and when formatting, the one given
        when formatting is used.
        </p>
      <p>The <c>call</c> trace flag is set on all processes. This
        means that any function activated with the <c>trc/1</c> command
        will be traced on all existing and new processes.
        </p>
    </section>
  </section>

  <section>
    <title>Running the Trace Tool Builder against a remote node</title>
    <p>The Observer application might not always be available on the
      node that shall be traced (in the following called the "traced
      node"). It is still possible to run the Trace Tool Builder from
      another node (in the following called the "trace control node") as
      long as
      </p>
    <list type="bulleted">
      <item>The Observer application is available on the trace control node.</item>
      <item>The Runtime Tools application is available on both the
       trace control node and the traced node.</item>
    </list>
    <p>If the Trace Tool Builder shall be used against a remote node,
      it is highly recommended to start the trace control node as
      <em>hidden</em>. This way it can connect to the traced node
      without the traced node "seeing" it, i.e. if the <c>nodes()</c>
      BIF is called on the traced node, the trace control node will not
      show. To start a hidden node, add the <c>-hidden</c> option to the
      <c>erl</c> command, e.g.</p>
    <code type="none">
% erl -sname trace_control -hidden    </code>

    <section>
      <title>Diskless node</title>
      <p>If the traced node is diskless, <c>ttb</c> must be started from
        a trace control node with disk access, and the <c>file</c> option
        must be given to the <c>tracer/2</c> function with the value
        <c>{local, File}</c>, e.g.</p>
      <code type="none">
(trace_control@durin)1> ttb:tracer(mynode@diskless,[{file,{local,
{wrap,"mytrace"}}}]).
{ok,[mynode@diskless]}      </code>
    </section>
  </section>

  <section>
    <marker id="trace_info"></marker>
    <title>Trace Information and the .ti File</title>
    <p>In addition to the trace log file(s), a file with the extension
      <c>.ti</c> is created when the Trace Tool Builder is started. This
      is the trace information file. It is a binary file, and it
      contains the process information, trace flags used, the name of
      the node to which it belongs and all information written with the
      <c>write_trace_info/2</c> function.
      </p>
    <p>To be able to use all this information during formatting, it is
      important that the trace information file exists in the same
      directory as the trace log, and that it has the same name as the
      trace log with the additional extension <c>.ti</c>.
      </p>
    <p>Except for the process information, everything in the trace
      information file is passed on to the handler function when
      formatting. The <c>TI</c> parameter is a list of
      <c>{Key,ValueList}</c> tuples. The keys <c>flags</c>,
      <c>handler</c>, <c>file</c> and <c>node</c> are used for
      information written directly by <c>ttb</c>.
      </p>
    <p>You can add information to the trace information file by
      calling <c>write_trace_info/2</c>. Note that <c>ValueList</c>
      always will be a list, and if you call <c>write_trace_info/2</c>
      several times with the same <c>Key</c>, the <c>ValueList</c> will
      be extended with a new value each time. Example:
      </p>
    <p><c>ttb:write_trace_info(mykey,1)</c> gives the entry
      <c>{mykey,[1]}</c> in <c>TI</c>. Another call,
      <c>ttb:write_trace_info(mykey,2)</c>, changes this entry to
      <c>{mykey,[1,2]}</c>.
      </p>
  </section>

  <section>
    <title>Wrap Logs</title>
    <p>If you want to limit the size of the trace logs, you can use
      wrap logs. This works almost like a circular buffer. You can
      specify the maximum number of binary logs and the maximum size of
      each log. <c>ttb</c> will create a new binary log each time a log
      reaches the maximum size. When the the maximum number of logs are
      reached, the oldest log is deleted before a new one is created.
      </p>
    <p>Wrap logs can be formatted one by one or all at once. See
      <seealso marker="#format">Formatting</seealso>.
      </p>
  </section>

  <section>
    <marker id="format"></marker>
    <title>Formatting</title>
    <p>Formatting can be done automatically when stopping <c>ttb</c>
      (see <seealso marker="#fetch_format">Automatically collect and format logs from all nodes</seealso>), or explicitly by calling
      the <c>ttb:format/1/2</c> function.
      </p>
    <p>Formatting means to read a binary log and present it in a
      readable format. You can use the default format handler in
      <c>ttb</c> to present each trace message as a line of text, or
      write your own handler to make more complex interpretations of the
      trace information. You can even use the Event Tracer <c>et</c> to
      present the trace log graphically (see <seealso marker="#et_viewer">Presenting trace logs with Event Tracer</seealso>).
      </p>
    <p>The first argument to <c>ttb:format/1/2</c> specifies which
      binary log(s) to format. This can be the name of one binary log, a
      list of such logs or the name of a directory containing one or
      more binary logs. If this argument indicates more than one log,
      and the <c>timestamp</c> flag was set when tracing, the trace
      messages from the different logs will be merged according to the
      timestamps in each message.
      </p>
    <p>The second argument to <c>ttb:format/2</c> is a list of
      options. The <c>out</c> option specifies the destination where the
      formatted text shall be written. Default destination is
      <c>standard_io</c>, but a filename can also be given. The
      <c>handler</c> option specifies the format handler to use. If this
      option is not given, the <c>handler</c> option given when starting
      the tracer is used. If the <c>handler</c> option was not given
      when starting the tracer either, a default handler is used, which
      prints each trace message as a line of text.
      </p>
    <p>A format handler is a fun taking four arguments. This fun will
      be called for each trace message in the binary log(s). A simple
      example which only prints each trace message could be like this:</p>
    <code type="none">
fun(Fd, Trace, _TraceInfo, State) ->
   io:format(Fd, "Trace: ~p~n", [Trace]),
   State
end.    </code>
    <p><c>Fd</c> is the file descriptor for the destination file, or
      the atom <c>standard_io</c>. <c>_TraceInfo</c> contains information
      from the trace information file (see <seealso marker="#trace_info">Trace Information and the .ti File</seealso>). <c>State</c> is a state variable for the format
      handler fun. The initial value of the <c>State</c> variable is
      given with the handler option, e.g.</p>
    <code type="none">
ttb:format("tiger@durin-ttb", [{handler, {{Mod,Fun}, initial_state}}])
                                                     ^^^^^^^^^^^^^    </code>
    <p>Another format handler could be used to calculate time spent by
      the garbage collector:</p>
    <code type="none">
fun(_Fd,{trace_ts,P,gc_start,_Info,StartTs},_TraceInfo,State) ->
      [{P,StartTs}|State];
   (Fd,{trace_ts,P,gc_end,_Info,EndTs},_TraceInfo,State) ->
      {value,{P,StartTs}} = lists:keysearch(P,1,State),
      Time = diff(StartTs,EndTs),
      io:format("GC in process ~w: ~w milliseconds~n", [P,Time]),
      State -- [{P,StartTs}]
end    </code>
    <p>A more refined version of this format handler is the function
      <c>handle_gc/4</c> in the module <c>multitrace.erl</c> which can
      be found in the <c>src</c> directory of the Observer application.
      </p>
    <p>By giving the format handler <c>et</c>, you can have the trace
      log presented graphically with <c>et_viewer</c> in the Event
      Tracer application (see <seealso marker="#et_viewer">Presenting trace logs with Event Tracer</seealso>).
      </p>
    <p>Wrap logs can be formatted one by one or all in one go. To
      format one of the wrap logs in a set, give the exact name of the
      file. To format the whole set of wrap logs, give the name with '*'
      instead of the wrap count. An example:
      </p>
    <p>Start tracing:</p>
    <code type="none">
(tiger@durin)1> ttb:tracer(node(),[{file,{wrap,"trace"}}]).
{ok,[tiger@durin]}
(tiger@durin)2> ttb:p(...)
...    </code>
    <p>This will give a set of binary logs, like:</p>
    <code type="none">
[email protected]
[email protected]
[email protected]
...    </code>
    <p>Format the whole set of logs:</p>
    <code type="none">
1> ttb:format("tiger@durin-trace.*.wrp").
....
ok
2>    </code>
    <p>Format only the first log:</p>
    <code type="none">
1> ttb:format("[email protected]").
....
ok
2>    </code>
    <p>To merge all wrap logs from two nodes:</p>
    <code type="none">
1> ttb:format(["tiger@durin-trace.*.wrp","lion@durin-trace.*.wrp"]).
....
ok
2>    </code>

    <section>
      <marker id="et_viewer"></marker>
      <title>Presenting trace logs with Event Tracer</title>
      <p>For detailed information about the Event Tracer, please turn
        to the User's Guide and Reference Manuals for the <c>et</c>
        application.
        </p>
      <p>By giving the format handler <c>et</c>, you can have the
        trace log presented graphically with <c>et_viewer</c> in the
        Event Tracer application. <c>ttb</c> provides a few different
        filters which can be selected from the Filter menu in the
        <c>et_viewer</c> window. The filters are names according to the
        type of actors they present (i.e. what each vertical line in the
        sequence diagram represent). Interaction between actors is shown
        as red arrows between two vertical lines, and activities within
        an actor are shown as blue text to the right of the actors line.
        </p>
      <p>The <c>processes</c> filter is the only filter which will
        show all trace messages from a trace log. Each vertical line in
        the sequence diagram represents a process. Erlang messages,
        spawn and link/unlink are typical interactions between
        processes. Function calls, scheduling and garbage collection are
        typical activities within a process. <c>processes</c> is the
        default filter.
        </p>
      <p>The rest of the filters will only show function calls and
        function returns. All other trace message are discarded. To get
        the most out of these filters, <c>et_viewer</c> needs to known
        the caller of each function and the time of return. This can be
        obtained by using both the <c>call</c> and <c>return_to</c>
        flags when tracing. Note that the <c>return_to</c> flag only
        works with local call trace, i.e. when trace patterns are set
        with <c>ttb:tpl</c>.
        </p>
      <p>The same result can be obtained by using the <c>call</c> flag
        only and setting a match specification like this on local or
        global function calls:</p>
      <code type="none">
1> dbg:fun2ms(fun(_) -> return_trace(),message(caller()) end).
[{'_',[],[{return_trace},{message,{caller}}]}]      </code>
      <p>This should however be done with care, since the
        <c>{return_trace}</c> function in the match specification will
        destroy tail recursiveness.
        </p>
      <p>The <c>modules</c> filter shows each module as a vertical
        line in the sequence diagram. External function calls/returns
        are shown as interactions between modules and internal function
        calls/returns are shown as activities within a module.
        </p>
      <p>The <c>functions</c> filter shows each function as a vertical
        line in the sequence diagram. A function calling itself is shown
        as an activity within a function, and all other function calls
        are shown as interactions between functions.
        </p>
      <p>The <c>mods_and_procs</c> and <c>funcs_and_procs</c> filters
        are equivalent to the <c>modules</c> and <c>functions</c>
        filters respectively, except that each module or function can
        have several vertical lines, one for each process it resides on.
        </p>
      <p>As an example this module is used, and the function
        <c>bar:f1()</c> is called from another module <c>foo</c>.</p>
      <code type="none">
-module(bar).
-export([f1/0,f3/0]).
f1() ->
    f2(),
    ok.
f2() ->
    spawn(?MODULE,f3,[]).
f3() ->
    ok.      </code>
      <p>The <c>call</c> and <c>return_to</c> flags are used, and
        trace pattern is set on local calls in module <c>bar</c>.
        </p>
      <p><c>ttb:format("tiger@durin-ttb", [{handler, et}])</c> gives the
        following result:
        </p>
      <p></p>
      <image file="et_processes.gif">
        <icaption>Filter: "processes"</icaption>
      </image>
      <image file="et_modsprocs.gif">
        <icaption>Filter: "mods_and_procs"</icaption>
      </image>
    </section>
  </section>

  <section>
    <marker id="fetch_format"></marker>
    <title>Automatically collect and format logs from all nodes</title>
    <p>If the option <c>fetch</c> is given to the <c>ttb:stop/1</c>
      function, trace logs and trace information files are fetched
      from all nodes after tracing is stopped. The logs are stored in a
      new directory named <c>ttb_upload-Timestamp</c> under the working
      directory of the trace control node.
      </p>
    <p>If the option <c>format</c> is given to <c>ttb:stop/1</c>, the
      trace logs are automatically formatted after tracing is
      stopped. Note that <c>format</c> also implies <c>fetch</c>,
      i.e. the trace logs will be collected from all nodes as for the
      <c>fetch</c> option before they are formatted. All logs in the
      upload directory are merged during formatting.
      </p>
  </section>

  <section>
    <title>History and Configuration Files</title>
    <p>For the tracing functionality, <c>dbg</c> could be used instead
      of the <c>ttb</c> for setting trace flags on processes and trace
      patterns for call trace, i.e. the functions <c>p</c>, <c>tp</c>,
      <c>tpl</c>, <c>ctp</c>, <c>ctpl</c> and <c>ctpg</c>. The only
      thing added by <c>ttb</c> for these functions is that all calls
      are stored in the history buffer and can be recalled and stored in
      a configuration file. This makes it easy to setup the same trace
      environment e.g. if you want to compare two test runs. It also
      reduces the amount of typing when using <c>ttb</c> from the erlang
      shell.
      </p>
    <p>Use <c>list_history/0</c> to see the content of the history
      buffer, and <c>run_history/1</c> to re-execute one of the entries.
      </p>
    <p>The main purpose of the history buffer is the possibility to
      create configuration files. Any function stored in the history
      buffer can be written to a configuration file and used for
      creating a specific configuration at any time with one single
      function call.
      </p>
    <p>A configuration file is created or extended with
      <c>write_config/2/3</c>. Configuration files are binary files
      and can therefore only be read and written with functions provided
      by <c>ttb</c>.
      </p>
    <p>You can write the complete content of the history buffer to a
      config file by calling
      <c>ttb:write_config(ConfigFile,all)</c>. And you can write
      selected entries from the history by calling
      <c>ttb:write_config(ConfigFile,NumList)</c>, where
      <c>NumList</c> is a list of integers pointing out the history
      entries to write.
      </p>
    <p>User defined entries can also be written to a config file by
      calling the function
      <c>ttb:write_config(ConfigFile,ConfigList)</c> where
      <c>ConfigList</c> is a list of <c>{Module,Function,Args}</c>.
      </p>
    <p>Any existing file <c>ConfigFile</c> is deleted and a new file
      is created when <c>write_config/2</c> is called. The option
      <c>append</c> can be used if you wish to add something at the end
      of an existing config file, e.g.
      <c>ttb:write_config(ConfigFile,What,[append])</c>.
      </p>

    <section>
      <title>Example: History and configuration files</title>
      <p>See the content of the history buffer</p>
      <code type="none"><![CDATA[
(tiger@durin)191> ttb:tracer().                                    
{ok,[tiger@durin]}
(tiger@durin)192> ttb:p(self(),[garbage_collection,call]).               
{ok,{[<0.1244.0>],[garbage_collection,call]}}
(tiger@durin)193> ttb:tp(ets,new,2,[]).                                  
{ok,[{matched,1}]}
(tiger@durin)194> ttb:list_history().
[{1,{ttb,tracer,[tiger@durin,[]]}},
 {2,{ttb,p,[<0.1244.0>,[garbage_collection,call]]}},
 {3,{ttb,tp,[ets,new,2,[]]}}]      ]]></code>
      <p>Execute an entry from the history buffer:</p>
      <code type="none"><![CDATA[
(tiger@durin)195> ttb:ctp(ets,new,2).
{ok,[{matched,1}]}
(tiger@durin)196> ttb:list_history().
[{1,{ttb,tracer,[tiger@durin,[]]}},
 {2,{ttb,p,[<0.1244.0>,[garbage_collection,call]]}},
 {3,{ttb,tp,[ets,new,2,[]]}},
 {4,{ttb,ctp,[ets,new,2]}}]
(tiger@durin)197> ttb:run_history(3).
ttb:tp(ets,new,2,[]) ->
{ok,[{matched,1}]}      ]]></code>
      <p>Write the content of the history buffer to a configuration
        file:</p>
      <code type="none"><![CDATA[
(tiger@durin)198> ttb:write_config("myconfig",all).
ok
(tiger@durin)199> ttb:list_config("myconfig").
[{1,{ttb,tracer,[tiger@durin,[]]}},
 {2,{ttb,p,[<0.1244.0>,[garbage_collection,call]]}},
 {3,{ttb,tp,[ets,new,2,[]]}},
 {4,{ttb,ctp,[ets,new,2]}},
 {5,{ttb,tp,[ets,new,2,[]]}}]      ]]></code>
      <p>Extend an existing configuration:</p>
      <code type="none"><![CDATA[
(tiger@durin)200> ttb:write_config("myconfig",[{ttb,tp,[ets,delete,1,[]]}],
[append]).
ok
(tiger@durin)201> ttb:list_config("myconfig").
[{1,{ttb,tracer,[tiger@durin,[]]}},
 {2,{ttb,p,[<0.1244.0>,[garbage_collection,call]]}},
 {3,{ttb,tp,[ets,new,2,[]]}},
 {4,{ttb,ctp,[ets,new,2]}},
 {5,{ttb,tp,[ets,new,2,[]]}},
 {6,{ttb,tp,[ets,delete,1,[]]}}]      ]]></code>
      <p>Go back to a previous configuration after stopping Trace Tool
        Builder:</p>
      <code type="none"><![CDATA[
(tiger@durin)202> ttb:stop().
ok
(tiger@durin)203> ttb:run_config("myconfig").
ttb:tracer(tiger@durin,[]) ->
{ok,[tiger@durin]}

ttb:p(<0.1244.0>,[garbage_collection,call]) ->
{ok,{[<0.1244.0>],[garbage_collection,call]}}

ttb:tp(ets,new,2,[]) ->
{ok,[{matched,1}]}

ttb:ctp(ets,new,2) ->
{ok,[{matched,1}]}

ttb:tp(ets,new,2,[]) ->
{ok,[{matched,1}]}

ttb:tp(ets,delete,1,[]) ->
{ok,[{matched,1}]}

ok      ]]></code>
      <p>Write selected entries from the history buffer to a
        configuration file:</p>
      <code type="none"><![CDATA[
(tiger@durin)204> ttb:list_history().          
[{1,{ttb,tracer,[tiger@durin,[]]}},
 {2,{ttb,p,[<0.1244.0>,[garbage_collection,call]]}},
 {3,{ttb,tp,[ets,new,2,[]]}},
 {4,{ttb,ctp,[ets,new,2]}},
 {5,{ttb,tp,[ets,new,2,[]]}},
 {6,{ttb,tp,[ets,delete,1,[]]}}]
(tiger@durin)205> ttb:write_config("myconfig",[1,2,3,6]).
ok
(tiger@durin)206> ttb:list_config("myconfig").
[{1,{ttb,tracer,[tiger@durin,[]]}},
 {2,{ttb,p,[<0.1244.0>,[garbage_collection,call]]}},
 {3,{ttb,tp,[ets,new,2,[]]}},
 {4,{ttb,tp,[ets,delete,1,[]]}}]
(tiger@durin)207>       ]]></code>
    </section>
  </section>

  <section>
    <title>Sequential Tracing</title>
    <p>To learn what sequential tracing is and how it can be used,
      please turn to the reference manual for the
      <em><c>seq_trace</c></em> module in the <em><c>kernel</c></em>
      application.
      </p>
    <p>The support for sequential tracing provided by the Trace Tool
      Builder includes </p>
    <list type="bulleted">
      <item>Initiation of the system tracer. This is automatically
       done when a trace port is started with <c>ttb:tracer/0/1/2</c></item>
      <item>Creation of match specifications which activates
       sequential tracing</item>
    </list>
    <p>Starting sequential tracing requires that a tracer has been
      started with the <c>ttb:tracer/0/1/2</c> function. Sequential
      tracing can then either be started via a trigger function with a
      match specification created with <c>ttb:seq_trigger_ms/0/1</c>,
      or directly by using the <c>seq_trace</c> module in the
      <c>kernel</c> application.
      </p>

    <section>
      <title>Example: Sequential tracing</title>
      <p>In the following example, the function
        <c>dbg:get_tracer/0</c> is used as trigger for sequential
        tracing:</p>
      <code type="none"><![CDATA[
(tiger@durin)110> ttb:tracer().                               
{ok,[tiger@durin]}
(tiger@durin)111> ttb:p(self(),call).                               
{ok,{[<0.158.0>],[call]}}
(tiger@durin)112> ttb:tp(dbg,get_tracer,0,ttb:seq_trigger_ms(send)).
{ok,[{matched,1},{saved,1}]}
(tiger@durin)113> dbg:get_tracer(), seq_trace:reset_trace().         
true
(tiger@durin)114> ttb:stop().                                       
ok
(tiger@durin)115> ttb:format("tiger@durin-ttb").                    
({<0.158.0>,{shell,evaluator,3},tiger@durin}) call dbg:get_tracer()
SeqTrace [0]: ({<0.158.0>,{shell,evaluator,3},tiger@durin}) 
{<0.237.0>,dbg,tiger@durin} ! {<0.158.0>,{get_tracer,tiger@durin}} 
[Serial: {0,1}]
SeqTrace [0]: ({<0.237.0>,dbg,tiger@durin}) 
{<0.158.0>,{shell,evaluator,3},tiger@durin} ! {dbg,{ok,#Port<0.222>}} 
[Serial: {1,2}]
ok
(tiger@durin)116>       ]]></code>
      <p>Starting sequential tracing with a trigger is actually more
        useful if the trigger function is not called directly from the
        shell, but rather implicitly within a larger system. When
        calling a function from the shell, it is simpler to start
        sequential tracing directly, e.g.</p>
      <code type="none"><![CDATA[
(tiger@durin)116> ttb:tracer().                               
{ok,[tiger@durin]}
(tiger@durin)117> seq_trace:set_token(send,true), dbg:get_tracer(), 
seq_trace:reset_trace().
true
(tiger@durin)118> ttb:stop().
ok
(tiger@durin)119> ttb:format("tiger@durin-ttb").
SeqTrace [0]: ({<0.158.0>,{shell,evaluator,3},tiger@durin}) 
{<0.246.0>,dbg,tiger@durin} ! {<0.158.0>,{get_tracer,tiger@durin}} 
[Serial: {0,1}]
SeqTrace [0]: ({<0.246.0>,dbg,tiger@durin}) 
{<0.158.0>,{shell,evaluator,3},tiger@durin} ! {dbg,{ok,#Port<0.229>}} 
[Serial: {1,2}]
ok
(tiger@durin)120>       ]]></code>
      <p>In both examples above, the <c>seq_trace:reset_trace/0</c>
        resets the trace token immediately after the traced function in
        order to avoid lots of trace messages due to the printouts in
        the erlang shell.
        </p>
      <p>All functions in the <c>seq_trace</c> module, except
        <c>set_system_tracer/1</c>, can be used after the trace port has
        been started with <c>ttb:tracer/0/1/2</c>.
        </p>
    </section>
  </section>

  <section>
    <title>Example: Multipurpose trace tool</title>
    <p>The module <c>multitrace.erl</c> which can be found in the
      <c>src</c> directory of the Observer application implements a
      small tool with three possible trace settings. The trace messages
      are written to binary files which can be formatted with the
      function <em><c>multitrace:format/1/2</c></em>.
      </p>
    <taglist>
      <tag><em><c>multitrace:debug(What)</c></em></tag>
      <item>Start calltrace on all processes and trace the given
       function(s). The format handler used is
      <c>multitrace:handle_debug/4</c> which prints each call and
       return. <c>What</c> must be an item or a list of items to trace,
       given on the format <c>{Module,Function,Arity}</c>,
      <c>{Module,Function}</c> or just <c>Module</c>.</item>
      <tag><em><c>multitrace:gc(Procs)</c></em></tag>
      <item>Trace garbage collection on the given process(es). The
       format handler used is <c>multitrace:handle_gc/4</c> which
       prints start and stop and the time spent for each GC.</item>
      <tag><em><c>multitrace:schedule(Procs)</c></em></tag>
      <item>Trace in- and out-scheduling on the given process(es). The
       format handler used is <c>multitrace:handle_schedule/4</c> which
       prints each in and out scheduling with process, timestamp and
       current function. It also prints the total time each traced
       process was scheduled in.</item>
    </taglist>
  </section>
</chapter>