path: root/lib/snmp/doc/src/snmpm.xml

<?xml version="1.0" encoding="iso-8859-1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>2004</year><year>2010</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      The contents of this file are subject to the Erlang Public License,
      Version 1.1, (the "License"); you may not use this file except in
      compliance with the License. You should have received a copy of the
      Erlang Public License along with this software. If not, it can be
      retrieved online at http://www.erlang.org/.

      Software distributed under the License is distributed on an "AS IS"
      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
      the License for the specific language governing rights and limitations
      under the License.

    </legalnotice>

    <title>snmpm</title>
    <prepared></prepared>
    <responsible></responsible>
    <docno></docno>
    <approved></approved>
    <checked></checked>
    <date></date>
    <rev></rev>
    <file>snmpm.xml</file>
  </header>
  <module>snmpm</module>
  <modulesummary>Interface functions to the SNMP toolkit manager</modulesummary>
  <description>
    <p>The module <c>snmpm</c> contains interface functions to the 
      SNMP manager. </p>
  </description>

  <section>
    <title>Common Data Types</title>
    <p>The following data types are used in the functions below:</p>
<code type="none"><![CDATA[
oid() = [byte()]  -  The oid() type is used to represent an ASN.1 OBJECT IDENTIFIER
snmp_reply() = {error_status(), error_index(), varbinds()}
error_status() = noError | atom()
error_index() = integer()
varbinds() = [varbind()]
atl_type() = read | write | read_write
target_name() = string()  -  Is a unique *non-empty* string
vars_and_vals() = [var_and_val()]
var_and_val() = {oid(), value_type(), value()} | {oid(), value()}
value_type() = o ('OBJECT IDENTIFIER') | 
               i ('INTEGER') | 
               u ('Unsigned32') | 
               g ('Unsigned32') | 
               s ('OCTET SRING') | 
               b ('BITS') | 
               ip ('IpAddress') | 
               op ('Opaque') | 
               c32 ('Counter32') | 
               c64 ('Counter64') | 
               tt ('TimeTicks')
value() = term()
community() = string()
sec_model() = any | v1 | v2c | usm
sec_name() = string()
sec_level() = noAuthNoPriv | authNoPriv | authPriv
]]></code>

    <marker id="monitor"></marker>
  </section>
  <funcs>
    <func>
      <name>monitor() -> Ref</name>
      <fsummary>Monitor the snmp manager</fsummary>
      <type>
        <v>Ref = reference()</v>
      </type>
      <desc>
        <p>Monitor the SNMP manager. In case of a crash, the calling 
          (monitoring) process will get a 'DOWN' message (see the erlang 
          module for more info). </p>

        <marker id="demonitor"></marker>
      </desc>
    </func>

    <func>
      <name>demonitor(Ref) -> void()</name>
      <fsummary>Turn off monitoring of the snmp manager</fsummary>
      <type>
        <v>Ref = reference()</v>
      </type>
      <desc>
        <p>Turn off monitoring of the SNMP manager. </p>

        <marker id="notify_started"></marker>
      </desc>
    </func>

    <func>
      <name>notify_started(Timeout) -> Pid</name>
      <fsummary>Request to be notified when manager started</fsummary>
      <type>
        <v>Timeout = integer()</v>
        <v>Pid = pid()</v>
      </type>
      <desc>
        <p>Request a notification (message) when the SNMP manager has 
          started. </p>
        <p>The <c>Timeout</c> is the time the request is valid. The 
          value has to be greater then zero. </p>
        <p>The <c>Pid</c> is the process handling the supervision of the 
          SNMP manager start. When the manager has started a completion
          message will be sent to the client from this process: 
          <c>{snmpm_started, Pid}</c>. If the SNMP manager was not started 
          in time, a timeout message will be sent to the client: 
          <c>{snmpm_start_timeout, Pid}</c>. </p>
        <p>A client application that is dependent on the SNMP manager 
          will use this function in order to be notified of when the
          manager has started. There are two situations when this 
          is useful:</p>
        <list type="bulleted">
          <item>
            <p>During the start of a system, when a client application 
              <em>could</em> start prior to the SNMP manager but is dependent
              upon it, and therefor has to wait for it to start.</p>
          </item>
          <item>
            <p>When the SNMP manager has crashed, the dependent client 
              application has to wait for the SNMP manager to be restarted
              before it can <em>reconnect</em>.</p>
          </item>
        </list>
        <p>The function returns the pid() of a handler process, that does
          the supervision on behalf of the client application. Note that the 
          client application is linked to this handler. </p>
        <p>This function is used in conjunction with the monitor function.</p>

        <marker id="cancel_notify_started"></marker>
      </desc>
    </func>

    <func>
      <name>cancel_notify_started(Pid) -> void()</name>
      <fsummary>Cancel request to be notified when manager started</fsummary>
      <type>
        <v>Pid = pid()</v>
      </type>
      <desc>
        <p>Cancel a previous request to be notified of SNMP manager start.</p>

        <marker id="register_user"></marker>
      </desc>
    </func>

    <func>
      <name>register_user(Id, Module, Data) -> ok | {error, Reason}</name>
      <name>register_user(Id, Module, Data, DefaultAgentConfig) -> ok | {error, Reason}</name>
      <fsummary>Register a user of the manager</fsummary>
      <type>
        <v>Id = term()</v>
        <v>Module = snmpm_user()</v>
        <v>Data = term()</v>
        <v>DefaultAgentConfig = [default_agent_config()]</v>
        <v>default_agent_config() = {Item, Val}</v>
        <v>Item = community | timeout | max_message_size | version | sec_model | sec_name | sec_level</v>
        <v>Val = term()</v>
        <v>Reason = term()</v>
        <v>snmpm_user() = Module implementing the snmpm_user behaviour</v>
      </type>
      <desc>
        <p>Register the manager entity (=user) responsible for specific 
          agent(s). </p>

        <p><c>Module</c> is the callback module (snmpm_user behaviour) which 
          will be called whenever something happens (detected 
          agent, incoming reply or incoming trap/notification).
          Note that this could have already been done as a 
          consequence of the node config. (see users.conf).</p>

        <p>The argument <c>DefaultAgentConfig</c> is used as default values when 
          this user register agents.</p>

        <p>The type of <c>Val</c> depends on <c>Item</c>: </p>
<code type="none"><![CDATA[
community = string()
timeout = integer() | snmp_timer()
max_message_size = integer()
version = v1 | v2 | v3 
sec_model = any | v1 | v2c | usm 
sec_name = string() 
sec_level = noAuthNoPriv | authNoPriv | authPriv
        ]]></code>

        <marker id="register_user_monitor"></marker>
      </desc>
    </func>

    <func>
      <name>register_user_monitor(Id, Module, Data) -> ok | {error, Reason}</name>
      <name>register_user_monitor(Id, Module, Data, DefaultAgentConfig) -> ok | {error, Reason}</name>
      <fsummary>Register a monitored user of the manager</fsummary>
      <type>
        <v>Id = term()</v>
        <v>Module = snmpm_user()</v>
        <v>DefaultAgentConfig = [default_agent_config()]</v>
        <v>default_agent_config() = {Item, Val}</v>
        <v>Item = community | timeout | max_message_size | version | sec_model | sec_name | sec_level</v>
        <v>Val = term()</v>
        <v>Data = term()</v>
        <v>Reason = term()</v>
        <v>snmpm_user() = Module implementing the snmpm_user behaviour</v>
      </type>
      <desc>
        <p>Register the monitored manager entity (=user) responsible 
          for specific agent(s). </p>

        <p>The process performing the registration will be monitored. 
          Which means that if that process should die, all agents 
          registered by that user process will be unregistered. All 
          outstanding requests will be canceled. </p>

        <p><c>Module</c> is the callback module (snmpm_user behaviour) which 
          will be called whenever something happens (detected 
          agent, incoming reply or incoming trap/notification).
          Note that this could have already been done as a 
          consequence of the node config. (see users.conf).</p>

        <p>The argument <c>DefaultAgentConfig</c> is used as default values when 
          this user register agents.</p>

        <p>The type of <c>Val</c> depends on <c>Item</c>: </p>
<code type="none"><![CDATA[
community = string()
timeout = integer() | snmp_timer()
max_message_size = integer()
version = v1 | v2 | v3 
sec_model = any | v1 | v2c | usm 
sec_name = string() 
sec_level = noAuthNoPriv | authNoPriv | authPriv
        ]]></code>

        <marker id="unregister_user"></marker>
      </desc>
    </func>

    <func>
      <name>unregister_user(Id) -> ok | {error, Reason}</name>
      <fsummary>Unregister the user</fsummary>
      <type>
        <v>Id = term()</v>
      </type>
      <desc>
        <p>Unregister the user.</p>

        <marker id="which_users"></marker>
      </desc>
    </func>

    <func>
      <name>which_users() -> Users</name>
      <fsummary>Get a list of all users</fsummary>
      <type>
        <v>Users = [UserId]</v>
        <v>UserId = term()</v>
      </type>
      <desc>
        <p>Get a list of the identities of all registered users.</p>

        <marker id="register_agent"></marker>
      </desc>
    </func>

    <func>
      <name>register_agent(UserId, TargetName, Config) -> ok | {error, Reason}</name>
      <fsummary>Register this agent</fsummary>
      <type>
        <v>UserId = term()</v>
        <v>Addr = ip_address()</v>
        <v>TargetName = target_name()</v>
        <v>Config = [agent_config()]</v>
        <v>agent_config() = {Item, Val}</v>
        <v>Item = engine_id | address | port | community | timeout | max_message_size | version | sec_model | sec_name | sec_level</v>
        <v>Val = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Explicitly instruct the manager to handle this agent, with
          <c>UserId</c> as the responsible user. </p>
        <p>Called to instruct the manager that this agent 
          shall be handled. This function is used when
          the user knows in advance which agents the
          manager shall handle.
          Note that there is an alternate way to do the same thing:
          Add the agent to the manager config files (see 
          <seealso marker="snmp_manager_config_files#agents">agents.conf</seealso>).</p>
        <p><c>TargetName</c> is a non-empty string, 
          uniquely identifying the agent. </p>
        <p>The type of <c>Val</c> depends on <c>Item</c>: </p>
<code type="none"><![CDATA[
[mandatory] engine_id = string()
[mandatory] address = ip_address()
[optional]  port = integer()
[optional]  community = string()
[optional]  timeout = integer() | snmp_timer()
[optional]  max_message_size = integer()
[optional]  version = v1 | v2 | v3 
[optional]  sec_model = any | v1 | v2c | usm 
[optional]  sec_name = string() 
[optional]  sec_level = noAuthNoPriv | authNoPriv | authPriv
]]></code>
        <p>Note that if no <c>Port</c> is given, the default value is used.</p>

        <marker id="unregister_agent"></marker>
      </desc>
    </func>

    <func>
      <name>unregister_agent(UserId, TargetName) -> ok | {error, Reason}</name>
      <fsummary>Unregister the user</fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
      </type>
      <desc>
        <p>Unregister the agent.</p>

        <marker id="agent_info"></marker>
      </desc>
    </func>

    <func>
      <name>agent_info(TargetName, Item) -> {ok, Val} | {error, Reason}</name>
      <fsummary>Retrieve agent config</fsummary>
      <type>
        <v>TargetName = target_name()</v>
        <v>Item = atom()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Retrieve agent config.</p>

        <marker id="update_agent_info"></marker>
      </desc>
    </func>

    <func>
      <name>update_agent_info(UserId, TargetName, Item, Val) -> ok | {error, Reason}</name>
      <fsummary>Update agent config</fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>Item = atom()</v>
        <v>Val = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Update agent config.</p>

        <marker id="which_agents"></marker>
      </desc>
    </func>

    <func>
      <name>which_agents() -> Agents</name>
      <name>which_agents(UserId) -> Agents</name>
      <fsummary>List the registered agents</fsummary>
      <type>
        <v>UserId = term()</v>
        <v>Agents = [TargetName]</v>
        <v>TargetName = target_name()</v>
      </type>
      <desc>
        <p>Get a list of all registered agents or all agents registered
          by a specific user.</p>

        <marker id="register_usm_user"></marker>
      </desc>
    </func>

    <func>
      <name>register_usm_user(EngineID, UserName, Conf) -> ok | {error, Reason}</name>
      <fsummary>Register this USM user</fsummary>
      <type>
        <v>EngineID = string()</v>
        <v>UserName = string()</v>
        <v>Conf = [usm_config()]</v>
        <v>usm_config() = {Item, Val}</v>
        <v>Item = sec_name | auth | auth_key | priv | priv_key</v>
        <v>Val = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Explicitly instruct the manager to handle this USM user.
          Note that there is an alternate way to do the same thing:
          Add the usm user to the manager config files (see 
          <seealso marker="snmp_manager_config_files#usm_user">usm.conf</seealso>).</p>
        <p>The type of <c>Val</c> depends on <c>Item</c>: </p>
<code type="none"><![CDATA[
sec_name = string()
auth = usmNoAuthProtocol | usmHMACMD5AuthProtocol | usmHMACSHAAuthProtocoltimeout
auth_key = [integer()]   (length 16 if auth = usmHMACMD5AuthProtocol, 
                          length 20 if auth = usmHMACSHAAuthProtocol)
priv = usmNoPrivProtocol | usmDESPrivProtocol | usmAesCfb128Protocol
priv_key = [integer()]   (length is 16 if priv = usmDESPrivProtocol | usmAesCfb128Protocol).
]]></code>

        <marker id="unregister_usm_user"></marker>
      </desc>
    </func>

    <func>
      <name>unregister_usm_user(EngineID, UserName) -> ok | {error, Reason}</name>
      <fsummary>Unregister this USM user</fsummary>
      <type>
        <v>EngineID = string()</v>
        <v>UserName = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Unregister this USM user.</p>

        <marker id="which_usm_users1"></marker>
      </desc>
    </func>

    <func>
      <name>usm_user_info(EngineID, UserName, Item) -> {ok, Val} | {error, Reason}</name>
      <fsummary>Retrieve usm user config</fsummary>
      <type>
        <v>EngineID = string()</v>
        <v>UsmName = string()</v>
        <v>Item = sec_name | auth | auth_key | priv | priv_key</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Retrieve usm user config.</p>

        <marker id="update_usm_user_info"></marker>
      </desc>
    </func>

    <func>
      <name>update_usm_user_info(EngineID, UserName, Item, Val) -> ok | {error, Reason}</name>
      <fsummary>Update agent config</fsummary>
      <type>
        <v>EngineID = string()</v>
        <v>UsmName = string()</v>
        <v>Item = sec_name | auth | auth_key | priv | priv_key</v>
        <v>Val = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Update usm user config.</p>

        <marker id="which_usm_users"></marker>
      </desc>
    </func>

    <func>
      <name>which_usm_users() -> UsmUsers</name>
      <fsummary>List all the registered usm users</fsummary>
      <type>
        <v>UsmUsers = [{EngineID,UserName}]</v>
        <v>EngineID = string()</v>
        <v>UsmName = string()</v>
      </type>
      <desc>
        <p>Get a list of all registered usm users.</p>

        <marker id="which_usm_users2"></marker>
      </desc>
    </func>

    <func>
      <name>which_usm_users(EngineID) -> UsmUsers</name>
      <fsummary>List the registered usm users</fsummary>
      <type>
        <v>UsmUsers = [UserName]</v>
        <v>UserName = string()</v>
      </type>
      <desc>
        <p>Get a list of all registered usm users with engine-id 
          <c>EngineID</c>.</p>

        <marker id="sync_get"></marker>
      </desc>
    </func>

    <func>
      <name>sync_get(UserId, TargetName, Oids) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <name>sync_get(UserId, TargetName, Oids, SendOpts) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <fsummary>Synchronous <c>get-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>Oids = [oid()]</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>SnmpReply = snmp_reply()</v>
        <v>Remaining = integer()</v>
        <v>Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo, SnmpInfo} | term()</v>
        <v>ReqId = term()</v>
        <v>ActualReason = term()</v>
        <v>SecInfo = [sec_info()]</v>
        <v>sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}</v>
        <v>sec_tag() = atom()</v>
        <v>ExpectedValue = ReceivedValue = term()</v>
        <v>SnmpInfo = term()</v>
      </type>
      <desc>
        <p>Synchronous <c>get-request</c>. </p>

        <p><c>Remaining</c> is the remaining time of the given (or default) 
	timeout time.</p>

        <p>When <em>Reason</em> is <em>{send_failed, ...}</em> it means that
	the net_if process failed to send the message. This could happen
	because of any number of reasons, i.e. encoding error. 
	<em>ActualReason</em> is the actual reason in this case. </p>

	<p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a option (when using the built in net-if) would
	be tracing.</p>

	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

	<p>For <c>SnmpInfo</c>, see the user callback function 
	<seealso marker="snmpm_user#handle_report">handle_report</seealso>.</p>

        <marker id="async_get"></marker>
      </desc>
    </func>

    <func>
      <name>async_get(UserId, TargetName, Oids) -> {ok, ReqId} | {error, Reason}</name>
      <name>async_get(UserId, TargetName, Oids, SendOpts) -> {ok, ReqId} | {error, Reason}</name>
      <fsummary>Asynchronous <c>get-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>Oids = [oid()]</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>ReqId = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Asynchronous <c>get-request</c>.</p>

        <p>The reply, if it arrives, will be delivered to the user 
	through a call to the snmpm_user callback function 
	<c>handle_pdu</c>.</p>

        <p>The send option <c>timeout</c> specifies for how long the request is 
	valid (after which the manager is free to delete it).</p>

        <p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing.</p>
	
	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

        <marker id="sync_get_next"></marker>
      </desc>
    </func>

    <func>
      <name>sync_get_next(UserId, TargetName, Oids) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <name>sync_get_next(UserId, TargetName, Oids, SendOpts) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <fsummary>Synchronous <c>get-next-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>Oids = [oid()]</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>SnmpReply = snmp_reply()</v>
        <v>Remaining = integer()</v>
        <v>Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo, SnmpInfo} | term()</v>
        <v>ReqId = term()</v>
        <v>ActualReason = term()</v>
        <v>SecInfo = [sec_info()]</v>
        <v>sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}</v>
        <v>sec_tag() = atom()</v>
        <v>ExpectedValue = ReceivedValue = term()</v>
        <v>SnmpInfo = term()</v>
      </type>
      <desc>
        <p>Synchronous <c>get-next-request</c>. </p>

        <p><c>Remaining</c> is the remaining time of the given (or default) 
	timeout time.</p>

        <p>When <em>Reason</em> is <em>{send_failed, ...}</em> it means that
	the net_if process failed to send the message. This could happen
	because of any number of reasons, i.e. encoding error. 
	<em>ActualReason</em> is the actual reason in this case. </p>

	<p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing.</p>

	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

	<p>For <c>SnmpInfo</c>, see the user callback function 
	<seealso marker="snmpm_user#handle_report">handle_report</seealso>.</p>

        <marker id="async_get_next"></marker>
      </desc>
    </func>

    <func>
      <name>async_get_next(UserId, TargetName, Oids) -> {ok, ReqId} | {error, Reason}</name>
      <name>async_get_next(UserId, TargetName, Oids, SendOpts) -> {ok, ReqId} | {error, Reason}</name>
      <fsummary>Asynchronous <c>get-next-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>Oids = [oid()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>ReqId = integer()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Asynchronous <c>get-next-request</c>. </p>

        <p>The reply will be delivered to the user through a call
	to the snmpm_user callback function <c>handle_pdu</c>.</p>

	<p>The send option <c>timeout</c> specifies for how long the request is 
	valid (after which the manager is free to delete it).</p>

        <p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing.</p>
	
	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

        <marker id="sync_set"></marker>
      </desc>
    </func>

    <func>
      <name>sync_set(UserId, TargetName, VarsAndVals) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <name>sync_set(UserId, TargetName, VarsAndVals, SendOpts) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <fsummary>Synchronous <c>set-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>VarsAndVals = vars_and_vals()</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>SnmpReply = snmp_reply()</v>
        <v>Remaining = integer()</v>
        <v>Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo, SnmpInfo} | term()</v>
        <v>ReqId = term()</v>
        <v>ActualReason = term()</v>
        <v>SecInfo = [sec_info()]</v>
        <v>sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}</v>
        <v>sec_tag() = atom()</v>
        <v>ExpectedValue = ReceivedValue = term()</v>
        <v>SnmpInfo = term()</v>
      </type>
      <desc>
        <p>Synchronous <c>set-request</c>. </p>

        <p><c>Remaining</c> is the remaining time of the given (or default) 
	timeout time.</p>

	<p>When <em>Reason</em> is <em>{send_failed, ...}</em> it means that
	the net_if process failed to send the message. This could happen
	because of any number of reasons, i.e. encoding error. 
	<em>ActualReason</em> is the actual reason in this case. </p>

	<p>When <em>var_and_val()</em> is <em>{oid(), value()}</em>, the
	manager makes an educated guess based on the loaded mibs. </p>

	<p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing. </p>

	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

	<p>For <c>SnmpInfo</c>, see the user callback function 
	<seealso marker="snmpm_user#handle_report">handle_report</seealso>.</p>

        <marker id="async_set"></marker>
      </desc>
    </func>

    <func>
      <name>async_set(UserId, TargetName, VarsAndVals) -> {ok, ReqId} | {error, Reason}</name>
      <name>async_set(UserId, TargetName, VarsAndVals, SendOpts) -> {ok, ReqId} | {error, Reason}</name>
      <fsummary>Asynchronous <c>set-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>VarsAndVals = vars_and_vals()</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>ReqId = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Asynchronous <c>set-request</c>. </p>

	<p>The reply will be delivered to the user through a call
	to the snmpm_user callback function <c>handle_pdu</c>.</p>

	<p>The send option <c>timeout</c> specifies for how long the request is 
	valid (after which the manager is free to delete it).</p>

	<p>When <em>var_and_val()</em> is <em>{oid(), value()}</em>, the
	manager makes an educated guess based on the loaded mibs. </p>

	<p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing.</p>
	
	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

        <marker id="sync_get_bulk"></marker>
      </desc>
    </func>

    <func>
      <name>sync_get_bulk(UserId, TragetName, NonRep, MaxRep, Oids) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <name>sync_get_bulk(UserId, TragetName, NonRep, MaxRep, Oids, SendOpts) -> {ok, SnmpReply, Remaining} | {error, Reason}</name>
      <fsummary>Synchronous <c>get-bulk-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>NonRep = integer()</v>
        <v>MaxRep = integer()</v>
        <v>Oids = [oid()]</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>SnmpReply = snmp_reply()</v>
        <v>Remaining = integer()</v>
        <v>Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo, SnmpInfo} | term()</v>
        <v>ReqId = term()</v>
        <v>ActualReason = term()</v>
        <v>SecInfo = [sec_info()]</v>
        <v>sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}</v>
        <v>sec_tag() = atom()</v>
        <v>ExpectedValue = ReceivedValue = term()</v>
        <v>SnmpInfo = term()</v>
      </type>
      <desc>
        <p>Synchronous <c>get-bulk-request</c> (See RFC1905).</p>

        <p><c>Remaining</c> is the remaining time of the given (or default) 
	timeout time.</p>

        <p>When <em>Reason</em> is <em>{send_failed, ...}</em> it means that
	the net_if process failed to send the message. This could happen
	because of any number of reasons, i.e. encoding error. 
	<em>ActualReason</em> is the actual reason in this case. </p>

	<p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing.</p>
	
	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

	<p>For <c>SnmpInfo</c>, see the user callback function 
	<seealso marker="snmpm_user#handle_report">handle_report</seealso>.</p>

        <marker id="async_get_bulk"></marker>
      </desc>
    </func>

    <func>
      <name>async_get_bulk(UserId, TargetName, NonRep, MaxRep, Oids) -> {ok, ReqId} | {error, Reason}</name>
      <name>async_get_bulk(UserId, TargetName, NonRep, MaxRep, Oids, SendOpts) -> {ok, ReqId} | {error, Reason}</name>
      <fsummary>Asynchronous <c>get-bulk-request</c></fsummary>
      <type>
        <v>UserId = term()</v>
        <v>TargetName = target_name()</v>
        <v>NonRep = integer()</v>
        <v>MaxRep = integer()</v>
        <v>Oids = [oid()]</v>
        <v>SendOpts = send_opts()</v>
        <v>send_opts() = [send_opt()]</v>
        <v>send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} | {community, community()} | {sec_model, sec_model()} | {sec_name, string()} | {sec_level, sec_level()} | {max_message_size, pos_integer()}</v>
        <v>ReqId = integer()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Asynchronous <c>get-bulk-request</c> (See RFC1905).</p>

        <p>The reply will be delivered to the user through a call
	to the snmpm_user callback function <c>handle_pdu</c>.</p>

        <p>The send option <c>timeout</c> specifies for how long the request is 
	valid (after which the manager is free to delete it).</p>

        <p>The send option <c>extra</c> specifies an opaque data structure 
	passed on to the net-if process. The net-if process included in this
	application makes no use of this info, so the only use for it
	in such a configuration (when using the built in net-if) would
	be tracing.</p>
	
	<p>Some of the send options (<c>community</c>, <c>sec_model</c>, 
	<c>sec_name</c>, <c>sec_level</c> and <c>max_message_size</c>) 
	are <c>override options</c>. That is,
	for <em>this</em> request, they override any configuration done 
	when the agent was registered. </p>

        <marker id="cancel_async_request"></marker>
      </desc>
    </func>

    <func>
      <name>cancel_async_request(UserId, ReqId) -> ok | {error, Reason}</name>
      <fsummary>Cancel a asynchronous request</fsummary>
      <type>
        <v>UserId = term()</v>
        <v>ReqId = term()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Cancel a previous asynchronous request.</p>

        <marker id="log_to_txt"></marker>
      </desc>
    </func>

    <func>
      <name>log_to_txt(LogDir, Mibs)</name>
      <name>log_to_txt(LogDir, Mibs, OutFile) -> ok | {error, Reason}</name>
      <name>log_to_txt(LogDir, Mibs, OutFile, LogName) ->  ok | {error, Reason}</name>
      <name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile) ->  ok | {error, Reason}</name>
      <name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start) ->  ok | {error, Reason}</name>
      <name>log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop)  -> ok | {error, Reason}</name>
      <fsummary>Convert an Audit Trail Log to text format</fsummary>
      <type>
        <v>LogDir = string()</v>
        <v>Mibs = [MibName]</v>
        <v>MibName = string()</v>
        <v>OutFile = string()</v>
        <v>LogName = string()</v>
        <v>LogFile = string()</v>
        <v>Start = Stop = null | datetime() | {local_time,datetime()} |  {universal_time,datetime()} </v>
        <v>Reason = disk_log_open_error() | file_open_error() | term()</v>
        <v>disk_log_open_error() = {LogName, term()}</v>
        <v>file_open_error() = {OutFile, term()}</v>
      </type>
      <desc>
        <p>Converts an Audit Trail Log to a readable text file. 
          <c>OutFile</c> defaults to "./snmpm_log.txt". 
          <c>LogName</c> defaults to "snmpm_log". 
          <c>LogFile</c> defaults to "snmpm.log". 
          See <seealso marker="snmp#log_to_txt">snmp:log_to_txt</seealso> 
          for more info.</p>

        <marker id="change_log_size"></marker>
      </desc>
    </func>

    <func>
      <name>change_log_size(NewSize) -> ok | {error, Reason}</name>
      <fsummary>Change the size of the Audit Trail Log</fsummary>
      <type>
        <v>NewSize = {MaxBytes, MaxFiles}</v>
        <v>MaxBytes = integer()</v>
        <v>MaxFiles = integer()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Changes the log size of the Audit Trail Log. The application must 
          be configured to use the audit trail log function. Please refer to 
          disk_log(3) in Kernel Reference Manual for a description of how to 
          change the log size.
          </p>
        <p>The change is permanent, as long as the log is not deleted. 
          That means, the log size is remembered across reboots.</p>

        <marker id="set_log_type"></marker>
      </desc>
    </func>

    <func>
      <name>set_log_type(NewType) -> {ok, OldType} | {error, Reason}</name>
      <fsummary>Change the Audit Trail Log type</fsummary>
      <type>
        <v>NewType = OldType = atl_type()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Changes the run-time Audit Trail log type. </p>
        <p>Note that this has no effect on the application configuration as
          defined by configuration files, so a node restart will revert the 
          config to whatever is in those files. </p>
        <p>This function is primarily useful in testing/debugging 
          scenarios. </p>

        <marker id="load_mib"></marker>
      </desc>
    </func>

    <func>
      <name>load_mib(Mib) -> ok | {error, Reason}</name>
      <fsummary>Load a MIB into the manager</fsummary>
      <type>
        <v>Mib = MibName</v>
        <v>MibName = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Load a <c>Mib</c> into the manager. The <c>MibName</c> is the 
          name of the Mib, including the path to where the compiled mib is 
          found.  For example,</p>
        <code type="none">
          Dir = code:priv_dir(my_app) ++ "/mibs/",
          snmpm:load_mib(Dir ++ "MY-MIB").
        </code>

        <marker id="unload_mib"></marker>
      </desc>
    </func>

    <func>
      <name>unload_mib(Mib) -> ok | {error, Reason}</name>
      <fsummary>Unload a MIB from the manager</fsummary>
      <type>
        <v>Mib = MibName</v>
        <v>MibName = string()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Unload a <c>Mib</c> from the manager. The <c>MibName</c> is the 
          name of the Mib, including the path to where the compiled mib is 
          found.  For example,</p>
        <code type="none">
          Dir = code:priv_dir(my_app) ++ "/mibs/",
          snmpm:unload_mib(Dir ++ "MY-MIB").
        </code>

        <marker id="which_mibs"></marker>
      </desc>
    </func>

    <func>
      <name>which_mibs() -> Mibs</name>
      <fsummary>Which mibs are loaded into the manager</fsummary>
      <type>
        <v>Mibs = [{MibName, MibFile}]</v>
        <v>MibName = atom()</v>
        <v>MibFile = string()</v>
      </type>
      <desc>
        <p>Get a list of all the mib's loaded into the manager.</p>

        <marker id="name_to_oid"></marker>
      </desc>
    </func>

    <func>
      <name>name_to_oid(Name) -> {ok, Oids} | {error, Reason}</name>
      <fsummary>Get all the possible oid's for an alias-name</fsummary>
      <type>
        <v>Name = atom()</v>
        <v>Oids = [oid()]</v>
      </type>
      <desc>
        <p>Transform a alias-name to its oid.</p>
        <p>Note that an alias-name is only unique within the mib, so
          when loading several mib's into a manager, there might be
          several instances of the same aliasname.</p>

        <marker id="oid_to_name"></marker>
      </desc>
    </func>

    <func>
      <name>oid_to_name(Oid) -> {ok, Name} | {error, Reason}</name>
      <fsummary>Get the alias-name of the oid </fsummary>
      <type>
        <v>Oid = oid()</v>
        <v>Name = atom()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Transform a oid to its aliasname.</p>

        <marker id="oid_to_type"></marker>
      </desc>
    </func>

    <func>
      <name>oid_to_type(Oid) -> {ok, Type} | {error, Reason}</name>
      <fsummary>Get the type of the the oid</fsummary>
      <type>
        <v>Oid = oid()</v>
        <v>Type = atom()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>Retreive the type (asn1 bertype) of an oid.</p>

        <marker id="backup"></marker>
      </desc>
    </func>

    <func>
      <name>backup(BackupDir) -> ok | {error, Reason}</name>
      <fsummary>Backup manager data</fsummary>
      <type>
        <v>BackupDir = string()</v>
      </type>
      <desc>
        <p>Backup persistent data handled by the manager. </p>
        <p>BackupDir cannot be identical to DbDir. </p>

        <marker id="info"></marker>
      </desc>
    </func>

    <func>
      <name>info() -> [{Key, Value}]</name>
      <fsummary>Return information about the manager</fsummary>
      <type>
        <v>Key = atom()</v>
        <v>Value = term()</v>
      </type>
      <desc>
        <p>Returns a list (a dictionary) containing information about
          the manager. Information includes statistics counters, 
          miscellaneous info about each process (e.g. memory allocation), 
          and so on.</p>

        <marker id="verbosity"></marker>
      </desc>
    </func>

    <func>
      <name>verbosity(Ref, Verbosity) -> void()</name>
      <fsummary>Assign a new verbosity for the process</fsummary>
      <type>
        <v>Ref = server | config | net_if | note_store | all</v>
        <v>Verbosity = verbosity()</v>
        <v>verbosity() = silence | info | log | debug | trace </v>
      </type>
      <desc>
        <p>Sets verbosity for the designated process. For the lowest 
          verbosity <c>silence</c>, nothing is printed. The higher the
          verbosity, the more is printed.</p>

        <marker id="format_reason"></marker>
      </desc>
    </func>

    <func>
      <name>format_reason(Reason) -> string()</name>
      <name>format_reason(Prefix, Reason) -> string()</name>
      <fsummary>Assign a new verbosity for the process</fsummary>
      <type>
        <v>Reason = term()</v>
        <v>Prefix = integer() | string()</v>
      </type>
      <desc>
        <p>This utility function is used to create a formatted 
          (pretty printable) string of the error reason received
          from either:
          </p>
        <list type="bulleted">
          <item>
            <p>The <c>Reason</c> returned value if any of the 
              sync/async get/get-next/set/get-bulk
              functions returns <c>{error, Reason}</c></p>
          </item>
          <item>
            <p>The <c>Reason</c> parameter in the 
              <seealso marker="snmpm_user#handle_error">handle_error</seealso> user callback function.</p>
          </item>
        </list>
        <p><c>Prefix</c> should either be an indention string
          (e.g. a list of spaces) or a positive integer (which will be used
          to create the indention string of that length).</p>
      </desc>
    </func>
  </funcs>

  
</erlref>