%% -*- erlang-indent-level: 4; indent-tabs-mode: nil; fill-column: 80 -*-
%%% Copyright 2012 Erlware, LLC. All Rights Reserved.
%%%
%%% This file is provided to you under the Apache License,
%%% Version 2.0 (the "License"); you may not use this file
%%% except in compliance with the License. You may obtain
%%% a copy of the License at
%%%
%%% http://www.apache.org/licenses/LICENSE-2.0
%%%
%%% Unless required by applicable law or agreed to in writing,
%%% software distributed under the License is distributed on an
%%% "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
%%% KIND, either express or implied. See the License for the
%%% specific language governing permissions and limitations
%%% under the License.
%%%---------------------------------------------------------------------------
%%% @author Eric Merritt <[email protected]>
%%% @copyright (C) 2012 Erlware, LLC.
%%%
%%% @doc Given a complete built release this provider assembles that release
%%% into a release directory.
-module(rcl_prv_assembler).
-behaviour(rcl_provider).
-export([init/1,
do/1,
format_error/1]).
-include_lib("relcool/include/relcool.hrl").
%%============================================================================
%% API
%%============================================================================
-spec init(rcl_state:t()) -> {ok, rcl_state:t()}.
init(State) ->
{ok, State}.
%% @doc recursively dig down into the library directories specified in the state
%% looking for OTP Applications
-spec do(rcl_state:t()) -> {ok, rcl_state:t()} | relcool:error().
do(State) ->
{RelName, RelVsn} = rcl_state:default_release(State),
Release = rcl_state:get_release(State, RelName, RelVsn),
OutputDir = rcl_state:output_dir(State),
case create_output_dir(OutputDir) of
ok ->
case rcl_release:realized(Release) of
true ->
copy_app_directories_to_output(State, Release, OutputDir);
false ->
?RCL_ERROR({unresolved_release, RelName, RelVsn})
end;
Error ->
Error
end.
-spec format_error(ErrorDetail::term()) -> iolist().
format_error({unresolved_release, RelName, RelVsn}) ->
io_lib:format("The release has not been resolved ~p-~s", [RelName, RelVsn]);
format_error({ec_file_error, AppDir, TargetDir, E}) ->
io_lib:format("Unable to copy OTP App from ~s to ~s due to ~p",
[AppDir, TargetDir, E]);
format_error({config_does_not_exist, Path}) ->
io_lib:format("The config file specified for this release (~s) does not exist!",
[Path]);
format_error({specified_erts_does_not_exist, ErtsVersion}) ->
io_lib:format("Specified version of erts (~s) does not exist",
[ErtsVersion]);
format_error({release_script_generation_error, RelFile}) ->
io_lib:format("Unknown internal release error generating the release file to ~s",
[RelFile]);
format_error({release_script_generation_warning, Module, Warnings}) ->
["Warnings generating release \s",
rcl_util:indent(1), Module:format_warning(Warnings)];
format_error({unable_to_create_output_dir, OutputDir}) ->
io_lib:format("Unable to create output directory (possible permissions issue): ~s",
[OutputDir]);
format_error({release_script_generation_error, Module, Errors}) ->
["Errors generating release \n",
rcl_util:indent(1), Module:format_error(Errors)];
format_error({unable_to_make_symlink, AppDir, TargetDir, Reason}) ->
io_lib:format("Unable to symlink directory ~s to ~s because \n~s~s",
[AppDir, TargetDir, rcl_util:indent(1),
file:format_error(Reason)]).
%%%===================================================================
%%% Internal Functions
%%%===================================================================
-spec create_output_dir(file:name()) ->
ok | {error, Reason::term()}.
create_output_dir(OutputDir) ->
case filelib:is_dir(OutputDir) of
false ->
case rcl_util:mkdir_p(OutputDir) of
ok ->
ok;
{error, _} ->
?RCL_ERROR({unable_to_create_output_dir, OutputDir})
end;
true ->
ok
end.
copy_app_directories_to_output(State, Release, OutputDir) ->
LibDir = filename:join([OutputDir, "lib"]),
ok = ec_file:mkdir_p(LibDir),
Apps = rcl_release:application_details(Release),
Result = lists:filter(fun({error, _}) ->
true;
(_) ->
false
end,
lists:flatten(ec_plists:map(fun(App) ->
copy_app(LibDir, App)
end, Apps))),
case Result of
[E | _] ->
E;
[] ->
create_release_info(State, Release, OutputDir)
end.
copy_app(LibDir, App) ->
AppName = erlang:atom_to_list(rcl_app_info:name(App)),
AppVsn = rcl_app_info:vsn_as_string(App),
AppDir = rcl_app_info:dir(App),
TargetDir = filename:join([LibDir, AppName ++ "-" ++ AppVsn]),
if
AppDir == TargetDir ->
%% No need to do anything here, discover found something already in
%% a release dir
ok;
true ->
copy_app(App, AppDir, TargetDir)
end.
copy_app(App, AppDir, TargetDir) ->
remove_symlink_or_directory(TargetDir),
case rcl_app_info:link(App) of
true ->
link_directory(AppDir, TargetDir);
false ->
copy_directory(AppDir, TargetDir)
end.
remove_symlink_or_directory(TargetDir) ->
case ec_file:is_symlink(TargetDir) of
true ->
ec_file:remove(TargetDir);
false ->
case filelib:is_dir(TargetDir) of
true ->
ok = ec_file:remove(TargetDir, [recursive]);
false ->
ok
end
end.
link_directory(AppDir, TargetDir) ->
case file:make_symlink(AppDir, TargetDir) of
{error, Reason} ->
?RCL_ERROR({unable_to_make_symlink, AppDir, TargetDir, Reason});
ok ->
ok
end.
copy_directory(AppDir, TargetDir) ->
ec_plists:map(fun(SubDir) ->
copy_dir(AppDir, TargetDir, SubDir)
end, ["ebin",
"include",
"priv",
"src",
"c_src",
"README",
"LICENSE"]).
copy_dir(AppDir, TargetDir, SubDir) ->
SubSource = filename:join(AppDir, SubDir),
SubTarget = filename:join(TargetDir, SubDir),
case filelib:is_dir(SubSource) of
true ->
ok = rcl_util:mkdir_p(SubTarget),
case ec_file:copy(SubSource, SubTarget, [recursive]) of
{error, E} ->
?RCL_ERROR({ec_file_error, AppDir, SubTarget, E});
ok ->
ok
end;
false ->
ok
end.
create_release_info(State, Release, OutputDir) ->
RelName = erlang:atom_to_list(rcl_release:name(Release)),
ReleaseDir = filename:join([OutputDir,
"releases",
RelName ++ "-" ++
rcl_release:vsn(Release)]),
ReleaseFile = filename:join([ReleaseDir, RelName ++ ".rel"]),
ok = ec_file:mkdir_p(ReleaseDir),
case rcl_release:metadata(Release) of
{ok, Meta} ->
ok = ec_file:write_term(ReleaseFile, Meta),
write_bin_file(State, Release, OutputDir, ReleaseDir);
E ->
E
end.
write_bin_file(State, Release, OutputDir, RelDir) ->
RelName = erlang:atom_to_list(rcl_release:name(Release)),
RelVsn = rcl_release:vsn(Release),
BinDir = filename:join([OutputDir, "bin"]),
ok = ec_file:mkdir_p(BinDir),
VsnRel = filename:join(BinDir, RelName ++ "-" ++ RelVsn),
BareRel = filename:join(BinDir, RelName),
ErlOpts = rcl_state:get(State, erl_opts, ""),
StartFile = case rcl_state:get(State, extended_start_script, false) of
false ->
bin_file_contents(RelName, RelVsn,
rcl_release:erts(Release),
ErlOpts);
true ->
extended_bin_file_contents(RelName, RelVsn, rcl_release:erts(Release), ErlOpts)
end,
%% We generate the start script by default, unless the user
%% tells us not too
case rcl_state:get(State, generate_start_script, true) of
false ->
ok;
_ ->
ok = file:write_file(VsnRel, StartFile),
ok = file:change_mode(VsnRel, 8#777),
ok = file:write_file(BareRel, StartFile),
ok = file:change_mode(BareRel, 8#777)
end,
ok = file:write_file(filename:join(RelDir, "vm.args"), vm_args_file(RelName)),
copy_or_generate_sys_config_file(State, Release, OutputDir, RelDir).
%% @doc copy config/sys.config or generate one to releases/VSN/sys.config
-spec copy_or_generate_sys_config_file(rcl_state:t(), rcl_release:t(),
file:name(), file:name()) ->
{ok, rcl_state:t()} | relcool:error().
copy_or_generate_sys_config_file(State, Release, OutputDir, RelDir) ->
RelSysConfPath = filename:join([RelDir, "sys.config"]),
case rcl_state:sys_config(State) of
undefined ->
ok = generate_sys_config_file(RelSysConfPath),
include_erts(State, Release, OutputDir, RelDir);
ConfigPath ->
case filelib:is_regular(ConfigPath) of
false ->
?RCL_ERROR({config_does_not_exist, ConfigPath});
true ->
ok = ec_file:copy(ConfigPath, RelSysConfPath),
include_erts(State, Release, OutputDir, RelDir)
end
end.
%% @doc write a generic sys.config to the path RelSysConfPath
-spec generate_sys_config_file(string()) -> ok.
generate_sys_config_file(RelSysConfPath) ->
{ok, Fd} = file:open(RelSysConfPath, [write]),
io:format(Fd,
"%% Thanks to Ulf Wiger at Ericcson for these comments:~n"
"%%~n"
"%% This file is identified via the erl command line option -config File.~n"
"%% Note that File should have no extension, e.g.~n"
"%% erl -config .../sys (if this file is called sys.config)~n"
"%%~n"
"%% In this file, you can redefine application environment variables.~n"
"%% This way, you don't have to modify the .app files of e.g. OTP applications.~n"
"[].~n", []),
file:close(Fd).
%% @doc Optionally add erts directory to release, if defined.
-spec include_erts(rcl_state:t(), rcl_release:t(), file:name(), file:name()) -> {ok, rcl_state:t()} | relcool:error().
include_erts(State, Release, OutputDir, RelDir) ->
case rcl_state:get(State, include_erts, true) of
true ->
Prefix = code:root_dir(),
ErtsVersion = rcl_release:erts(Release),
ErtsDir = filename:join([Prefix, "erts-" ++ ErtsVersion]),
LocalErts = filename:join([OutputDir, "erts-" ++ ErtsVersion]),
case filelib:is_dir(ErtsDir) of
false ->
?RCL_ERROR({specified_erts_does_not_exist, ErtsVersion});
true ->
ok = ec_file:mkdir_p(LocalErts),
ok = ec_file:copy(ErtsDir, LocalErts, [recursive]),
ok = ec_file:remove(filename:join([LocalErts, "bin", "erl"])),
ok = file:write_file(filename:join([LocalErts, "bin", "erl"]), erl_script(ErtsVersion)),
case rcl_state:get(State, extended_start_script, false) of
true ->
ok = ec_file:copy(filename:join([Prefix, "bin", "start_clean.boot"]),
filename:join([OutputDir, "bin", "start_clean.boot"])),
NodeToolFile = nodetool_contents(),
NodeTool = filename:join([LocalErts, "bin", "nodetool"]),
ok = file:write_file(NodeTool, NodeToolFile),
ok = file:change_mode(NodeTool, 8#755);
false ->
ok
end,
make_boot_script(State, Release, OutputDir, RelDir)
end;
_ ->
make_boot_script(State, Release, OutputDir, RelDir)
end.
-spec make_boot_script(rcl_state:t(), rcl_release:t(), file:name(), file:name()) ->
{ok, rcl_state:t()} | relcool:error().
make_boot_script(State, Release, OutputDir, RelDir) ->
Options = [{path, [RelDir | get_code_paths(Release, OutputDir)]},
{outdir, RelDir},
no_module_tests, silent],
Name = erlang:atom_to_list(rcl_release:name(Release)),
ReleaseFile = filename:join([RelDir, Name ++ ".rel"]),
rcl_log:debug(rcl_state:log(State),
"Creating script from release file ~s ~n with options ~p ~n",
[ReleaseFile, Options]),
case make_script(Name, Options) of
ok ->
rcl_log:error(rcl_state:log(State),
"release successfully created!"),
{ok, State};
error ->
?RCL_ERROR({release_script_generation_error, ReleaseFile});
{ok, _, []} ->
rcl_log:error(rcl_state:log(State),
"release successfully created!"),
{ok, State};
{ok,Module,Warnings} ->
?RCL_ERROR({release_script_generation_warn, Module, Warnings});
{error,Module,Error} ->
?RCL_ERROR({release_script_generation_error, Module, Error})
end.
-spec make_script(string(), [term()]) ->
ok |
error |
{ok, module(), [term()]} |
{error,module,[term()]}.
make_script(Name, Options) ->
%% Erts 5.9 introduced a non backwards compatible option to
%% erlang this takes that into account
Erts = erlang:system_info(version),
case ec_semver:gte(Erts, "5.9") of
true ->
systools:make_script(Name, [no_warn_sasl | Options]);
_ ->
systools:make_script(Name, Options)
end.
%% @doc Generates the correct set of code paths for the system.
-spec get_code_paths(rcl_release:t(), file:name()) -> [file:name()].
get_code_paths(Release, OutDir) ->
LibDir = filename:join(OutDir, "lib"),
[filename:join([LibDir,
erlang:atom_to_list(rcl_app_info:name(App)) ++ "-" ++
rcl_app_info:vsn_as_string(App), "ebin"]) ||
App <- rcl_release:application_details(Release)].
erl_script(ErtsVsn) ->
[<<"#!/bin/sh
set -e
SCRIPT_DIR=`dirname $0`
ROOTDIR=`cd $SCRIPT_DIR/../../ && pwd`
BINDIR=$ROOTDIR/erts-">>, ErtsVsn, <<"/bin
EMU=beam
PROGNAME=`echo $0 | sed 's/.*\\///'`
export EMU
export ROOTDIR
export BINDIR
export PROGNAME
exec \"$BINDIR/erlexec\" ${1+\"$@\"}
">>].
bin_file_contents(RelName, RelVsn, ErtsVsn, ErlOpts) ->
[<<"#!/bin/sh
set -e
SCRIPT_DIR=`dirname $0`
RELEASE_ROOT_DIR=`cd $SCRIPT_DIR/.. && pwd`
REL_NAME=">>, RelName, <<"
REL_VSN=">>, RelVsn, <<"
ERTS_VSN=">>, ErtsVsn, <<"
REL_DIR=$RELEASE_ROOT_DIR/releases/$REL_NAME-$REL_VSN
ERL_OPTS=">>, ErlOpts, <<"
find_erts_dir() {
local erts_dir=$RELEASE_ROOT_DIR/erts-$ERTS_VSN
if [ -d \"$erts_dir\" ]; then
ERTS_DIR=$erts_dir;
ROOTDIR=$RELEASE_ROOT_DIR
else
local erl=`which erl`
local erl_root=`$erl -noshell -eval \"io:format(\\\"~s\\\", [code:root_dir()]).\" -s init stop`
ERTS_DIR=$erl_root/erts-$ERTS_VSN
ROOTDIR=$erl_root
fi
}
find_sys_config() {
local possible_sys=$REL_DIR/sys.config
if [ -f \"$possible_sys\" ]; then
SYS_CONFIG=\"-config $possible_sys\"
fi
}
find_erts_dir
find_sys_config
export ROOTDIR=$RELEASE_ROOT_DIR
export BINDIR=$ERTS_DIR/bin
export EMU=beam
export PROGNAME=erl
export LD_LIBRARY_PATH=$ERTS_DIR/lib
cd $ROOTDIR
$BINDIR/erlexec $ERL_OPTS $SYS_CONFIG -boot $REL_DIR/$REL_NAME $@">>].
extended_bin_file_contents(RelName, RelVsn, ErtsVsn, ErlOpts) ->
[<<"#!/bin/sh
set -e
SCRIPT_DIR=`dirname $0`
RELEASE_ROOT_DIR=`cd $SCRIPT_DIR/.. && pwd`
REL_NAME=">>, RelName, <<"
REL_VSN=">>, RelVsn, <<"
ERTS_VSN=">>, ErtsVsn, <<"
REL_DIR=$RELEASE_ROOT_DIR/releases/$REL_NAME-$REL_VSN
ERL_OPTS=">>, ErlOpts, <<"
PIPE_DIR=/tmp/$REL_DIR/
find_erts_dir() {
local erts_dir=$RELEASE_ROOT_DIR/erts-$ERTS_VSN
if [ -d \"$erts_dir\" ]; then
ERTS_DIR=$erts_dir;
ROOTDIR=$RELEASE_ROOT_DIR
else
local erl=`which erl`
local erl_root=`$erl -noshell -eval \"io:format(\\\"~s\\\", [code:root_dir()]).\" -s init stop`
ERTS_DIR=$erl_root/erts-$ERTS_VSN
ROOTDIR=$erl_root
fi
}
find_sys_config() {
local possible_sys=$REL_DIR/sys.config
if [ -f \"$possible_sys\" ]; then
SYS_CONFIG=\"-config $possible_sys\"
fi
}
# Use $CWD/vm.args if exists, otherwise releases/APP_VSN/vm.args, or else etc/vm.args
if [ -e \"$CALLER_DIR/vm.args\" ]; then
VMARGS_PATH=$CALLER_DIR/vm.args
USE_DIR=$CALLER_DIR
else
USE_DIR=$REL_DIR
if [ -e \"$REL_DIR/vm.args\" ]; then
VMARGS_PATH=\"$REL_DIR/vm.args\"
else
VMARGS_PATH=\"$REL_DIR/vm.args\"
fi
fi
RUNNER_LOG_DIR=$USE_DIR/log
# Make sure log directory exists
mkdir -p $RUNNER_LOG_DIR
# Use releases/VSN/sys.config if it exists otherwise use etc/app.config
if [ -e \"$USE_DIR/sys.config\" ]; then
CONFIG_PATH=\"$USE_DIR/sys.config\"
else
if [ -e \"$REL_DIR/sys.config\" ]; then
CONFIG_PATH=\"$REL_DIR/sys.config\"
else
CONFIG_PATH=\"$REL_DIR/app.config\"
fi
fi
# Extract the target node name from node.args
NAME_ARG=`egrep '^-s?name' $VMARGS_PATH`
if [ -z \"$NAME_ARG\" ]; then
echo \"vm.args needs to have either -name or -sname parameter.\"
exit 1
fi
# Extract the name type and name from the NAME_ARG for REMSH
REMSH_TYPE=`echo $NAME_ARG | awk '{print $1}'`
REMSH_NAME=`echo $NAME_ARG | awk '{print $2}'`
# Note the `date +%s`, used to allow multiple remsh to the same node transparently
REMSH_NAME_ARG=\"$REMSH_TYPE remsh`date +%s`@`echo $REMSH_NAME | awk -F@ '{print $2}'`\"
REMSH_REMSH_ARG=\"-remsh $REMSH_NAME\"
# Extract the target cookie
COOKIE_ARG=`grep '^-setcookie' $VMARGS_PATH`
if [ -z \"$COOKIE_ARG\" ]; then
echo \"vm.args needs to have a -setcookie parameter.\"
exit 1
fi
# Setup remote shell command to control node
REMSH=\"$ERTS_PATH/erl $REMSH_NAME_ARG $REMSH_REMSH_ARG $COOKIE_ARG\"
find_erts_dir
find_sys_config
export ROOTDIR=$RELEASE_ROOT_DIR
export BINDIR=$ERTS_DIR/bin
export EMU=beam
export PROGNAME=erl
export LD_LIBRARY_PATH=$ERTS_DIR/lib
cd $ROOTDIR
# Setup command to control the node
NODETOOL=\"$ERTS_DIR/bin/escript $ERTS_DIR/bin/nodetool $NAME_ARG $COOKIE_ARG\"
# Check the first argument for instructions
case \"$1\" in
start|start_boot)
# Make sure there is not already a node running
#RES=`$NODETOOL ping`
#if [ \"$RES\" = \"pong\" ]; then
# echo \"Node is already running!\"
# exit 1
#fi
case \"$1\" in
start)
shift
START_OPTION=\"console\"
HEART_OPTION=\"start\"
;;
start_boot)
shift
START_OPTION=\"console_boot\"
HEART_OPTION=\"start_boot\"
;;
esac
RUN_PARAM=$(printf \"'%s' \" \"$@\")
HEART_COMMAND=\"$SCRIPT_DIR/bin/$REL_NAME $HEART_OPTION $RUN_PARAM\"
export HEART_COMMAND
mkdir -p $PIPE_DIR
$ERTS_DIR/bin/run_erl -daemon $PIPE_DIR $RUNNER_LOG_DIR \"exec $RELEASE_ROOT_DIR/bin/$REL_NAME $START_OPTION $RUN_PARAM\" 2>&1
;;
stop)
# Wait for the node to completely stop...
case `uname -s` in
Linux|Darwin|FreeBSD|DragonFly|NetBSD|OpenBSD)
# PID COMMAND
PID=`ps ax -o pid= -o command=|
grep \"$SCRIPT_DIR/.*/[b]eam\"|awk '{print $1}'`
;;
SunOS)
# PID COMMAND
PID=`ps -ef -o pid= -o args=|
grep \"$SCRIPT_DIR/.*/[b]eam\"|awk '{print $1}'`
;;
CYGWIN*)
# UID PID PPID TTY STIME COMMAND
PID=`ps -efW|grep \"$SCRIPT_DIR/.*/[b]eam\"|awk '{print $2}'`
;;
esac
$NODETOOL stop
ES=$?
if [ \"$ES\" -ne 0 ]; then
exit $ES
fi
while `kill -0 $PID 2>/dev/null`;
do
sleep 1
done
;;
restart)
## Restart the VM without exiting the process
$NODETOOL restart
ES=$?
if [ \"$ES\" -ne 0 ]; then
exit $ES
fi
;;
reboot)
## Restart the VM completely (uses heart to restart it)
$NODETOOL reboot
ES=$?
if [ \"$ES\" -ne 0 ]; then
exit $ES
fi
;;
ping)
## See if the VM is alive
$NODETOOL ping
ES=$?
if [ \"$ES\" -ne 0 ]; then
exit $ES
fi
;;
attach)
# Make sure a node IS running
RES=`$NODETOOL ping`
ES=$?
if [ \"$ES\" -ne 0 ]; then
echo \"Node is not running!\"
exit $ES
fi
shift
exec $ERTS_DIR/bin/to_erl $PIPE_DIR
;;
remote_console)
# Make sure a node IS running
RES=`$NODETOOL ping`
ES=$?
if [ \"$ES\" -ne 0 ]; then
echo \"Node is not running!\"
exit $ES
fi
shift
exec $REMSH
;;
upgrade)
if [ -z \"$2\" ]; then
echo \"Missing upgrade package argument\"
echo \"Usage: $REL_NAME upgrade {package base name}\"
echo \"NOTE {package base name} MUST NOT include the .tar.gz suffix\"
exit 1
fi
# Make sure a node IS running
RES=`$NODETOOL ping`
ES=$?
if [ \"$ES\" -ne 0 ]; then
echo \"Node is not running!\"
exit $ES
fi
node_name=`echo $NAME_ARG | awk '{print $2}'`
erlang_cookie=`echo $COOKIE_ARG | awk '{print $2}'`
$ERTS_DIR/bin/escript $SCRIPT_DIR/bin/install_upgrade.escript $node_name $erlang_cookie $2
;;
console|console_clean|console_boot)
# .boot file typically just $REL_NAME (ie, the app name)
# however, for debugging, sometimes start_clean.boot is useful.
# For e.g. 'setup', one may even want to name another boot script.
case \"$1\" in
console) BOOTFILE=$REL_NAME ;;
console_clean) BOOTFILE=start_clean ;;
console_boot)
shift
BOOTFILE=\"$1\"
shift
;;
esac
# Setup beam-required vars
ROOTDIR=$RELEASE_ROOT_DIR
BINDIR=$RELEASE_ROOT_DIR/erts-$ERTS_VSN/bin
EMU=beam
PROGNAME=`echo $0 | sed 's/.*\\///'`
CMD=\"$BINDIR/erlexec -boot $REL_DIR/$BOOTFILE -mode embedded -config $CONFIG_PATH -args_file $VMARGS_PATH\"
export EMU
export ROOTDIR
export BINDIR
export PROGNAME
# Dump environment info for logging purposes
echo \"Exec: $CMD\" -- ${1+\"$@\"}
echo \"Root: $ROOTDIR\"
# Log the startup
logger -t \"$REL_NAME[$$]\" \"Starting up\"
# Start the VM
exec $CMD -- ${1+\"$@\"}
;;
foreground)
# start up the release in the foreground for use by runit
# or other supervision services
BOOTFILE=$REL_NAME
FOREGROUNDOPTIONS=\"-noinput +Bd\"
# Setup beam-required vars
ROOTDIR=$RELEASE_ROOT_DIR
BINDIR=$RELEASE_ROOT_DIR/erts-$ERTS_VSN/bin
EMU=beam
PROGNAME=`echo $0 | sed 's/.*///'`
CMD=\"$BINDIR/erlexec $FOREGROUNDOPTIONS -boot $REL_DIR/$BOOTFILE -config $CONFIG_PATH -args_file $VMARGS_PATH\"
export EMU
export ROOTDIR
export BINDIR
export PROGNAME
# Dump environment info for logging purposes
echo \"Exec: $CMD\" -- ${1+\"$@\"}
echo \"Root: $ROOTDIR\"
# Start the VM
exec $CMD -- ${1+\"$@\"}
;;
*)
echo \"Usage: $REL_NAME {start|start_boot <file>|foreground|stop|restart|reboot|ping|console|console_clean|console_boot <file>|attach|remote_console|upgrade}\"
exit 1
;;
esac
exit 0">>].
nodetool_contents() ->
[<<"%% -*- mode: erlang;erlang-indent-level: 4;indent-tabs-mode: nil -*-
%% ex: ft=erlang ts=4 sw=4 et
%% -------------------------------------------------------------------
%%
%% nodetool: Helper Script for interacting with live nodes
%%
%% -------------------------------------------------------------------
main(Args) ->
ok = start_epmd(),
%% Extract the args
{RestArgs, TargetNode} = process_args(Args, [], undefined),
%% See if the node is currently running -- if it's not, we'll bail
case {net_kernel:hidden_connect_node(TargetNode), net_adm:ping(TargetNode)} of
{true, pong} ->
ok;
{_, pang} ->
io:format(\"Node ~p not responding to pings.\n\", [TargetNode]),
halt(1)
end,
case RestArgs of
[\"ping\"] ->
%% If we got this far, the node already responsed to a ping, so just dump
%% a \"pong\"
io:format(\"pong\n\");
[\"stop\"] ->
io:format(\"~p\n\", [rpc:call(TargetNode, init, stop, [], 60000)]);
[\"restart\"] ->
io:format(\"~p\n\", [rpc:call(TargetNode, init, restart, [], 60000)]);
[\"reboot\"] ->
io:format(\"~p\n\", [rpc:call(TargetNode, init, reboot, [], 60000)]);
[\"rpc\", Module, Function | RpcArgs] ->
case rpc:call(TargetNode, list_to_atom(Module), list_to_atom(Function),
[RpcArgs], 60000) of
ok ->
ok;
{badrpc, Reason} ->
io:format(\"RPC to ~p failed: ~p\n\", [TargetNode, Reason]),
halt(1);
_ ->
halt(1)
end;
[\"rpcterms\", Module, Function, ArgsAsString] ->
case rpc:call(TargetNode, list_to_atom(Module), list_to_atom(Function),
consult(ArgsAsString), 60000) of
{badrpc, Reason} ->
io:format(\"RPC to ~p failed: ~p\n\", [TargetNode, Reason]),
halt(1);
Other ->
io:format(\"~p\n\", [Other])
end;
Other ->
io:format(\"Other: ~p\n\", [Other]),
io:format(\"Usage: nodetool {ping|stop|restart|reboot}\n\")
end,
net_kernel:stop().
process_args([], Acc, TargetNode) ->
{lists:reverse(Acc), TargetNode};
process_args([\"-setcookie\", Cookie | Rest], Acc, TargetNode) ->
erlang:set_cookie(node(), list_to_atom(Cookie)),
process_args(Rest, Acc, TargetNode);
process_args([\"-name\", TargetName | Rest], Acc, _) ->
ThisNode = append_node_suffix(TargetName, \"_maint_\"),
{ok, _} = net_kernel:start([ThisNode, longnames]),
process_args(Rest, Acc, nodename(TargetName));
process_args([\"-sname\", TargetName | Rest], Acc, _) ->
ThisNode = append_node_suffix(TargetName, \"_maint_\"),
{ok, _} = net_kernel:start([ThisNode, shortnames]),
process_args(Rest, Acc, nodename(TargetName));
process_args([Arg | Rest], Acc, Opts) ->
process_args(Rest, [Arg | Acc], Opts).
start_epmd() ->
[] = os:cmd(epmd_path() ++ \" -daemon\"),
ok.
epmd_path() ->
ErtsBinDir = filename:dirname(escript:script_name()),
Name = \"epmd\",
case os:find_executable(Name, ErtsBinDir) of
false ->
case os:find_executable(Name) of
false ->
io:format(\"Could not find epmd.~n\"),
halt(1);
GlobalEpmd ->
GlobalEpmd
end;
Epmd ->
Epmd
end.
nodename(Name) ->
case string:tokens(Name, \"@\") of
[_Node, _Host] ->
list_to_atom(Name);
[Node] ->
[_, Host] = string:tokens(atom_to_list(node()), \"@\"),
list_to_atom(lists:concat([Node, \"@\", Host]))
end.
append_node_suffix(Name, Suffix) ->
case string:tokens(Name, \"@\") of
[Node, Host] ->
list_to_atom(lists:concat([Node, Suffix, os:getpid(), \"@\", Host]));
[Node] ->
list_to_atom(lists:concat([Node, Suffix, os:getpid()]))
end.
%%
%% Given a string or binary, parse it into a list of terms, ala file:consult/0
%%
consult(Str) when is_list(Str) ->
consult([], Str, []);
consult(Bin) when is_binary(Bin)->
consult([], binary_to_list(Bin), []).
consult(Cont, Str, Acc) ->
case erl_scan:tokens(Cont, Str, 0) of
{done, Result, Remaining} ->
case Result of
{ok, Tokens, _} ->
{ok, Term} = erl_parse:parse_term(Tokens),
consult([], Remaining, [Term | Acc]);
{eof, _Other} ->
lists:reverse(Acc);
{error, Info, _} ->
{error, Info}
end;
{more, Cont1} ->
consult(Cont1, eof, Acc)
end.">>].
vm_args_file(RelName) ->
[<<"## Name of the node
-name ">>, RelName, <<"@127.0.0.1
## Cookie for distributed erlang
-setcookie ">>, RelName, <<"
## Heartbeat management; auto-restarts VM if it dies or becomes unresponsive
## (Disabled by default..use with caution!)
##-heart
## Enable kernel poll and a few async threads
##+K true
##+A 5
## Increase number of concurrent ports/sockets
##-env ERL_MAX_PORTS 4096
## Tweak GC to run more often
##-env ERL_FULLSWEEP_AFTER 10">>].
