remove docs (they have been moved to the wiki)

Signed-off-by: Jordan Wilberding <[email protected]>

6 files changed, 0 insertions, 617 deletions

diff --git a/Makefile b/Makefile
index 599bcb3..f1b28f2 100644
--- a/Makefile
+++ b/Makefile
@@ -41,15 +41,6 @@ endif
 all: compile escript dialyzer test
 
 # =============================================================================
-# Include relevant sub-makefiles.
-# =============================================================================
-# These are not subdirs, they are just additional makefile information
-# that happens to live subdirectories
-
-include $(CURDIR)/docs/docs.mkf
-
-
-# =============================================================================
 # Rules to build the system
 # =============================================================================
 
diff --git a/docs/conf.py b/docs/conf.py
deleted file mode 100644
index f29af4c..0000000
--- a/docs/conf.py
+++ /dev/null
@@ -1,285 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# Relcool documentation build configuration file, created by
-# sphinx-quickstart on Mon Sep 10 10:04:06 2012.
-#
-# This file is execfile()d with the current directory set to its containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import sys, os
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration -----------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be extensions
-# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
-extensions = []
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'Relcool'
-copyright = u'2012, Eric B MErritt'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '0.0.1'
-# The full version, including alpha/beta/rc tags.
-release = '0.0.1'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ['_build']
-
-# The reST default role (used for this markup: `text`) to use for all documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-
-# -- Options for HTML output ---------------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'Relcooldoc'
-
-
-# -- Options for LaTeX output --------------------------------------------------
-
-latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
-
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title, author, documentclass [howto/manual]).
-latex_documents = [
-  ('index', 'Relcool.tex', u'Relcool Documentation',
-   u'Eric B MErritt', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output --------------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('index', 'relcool', u'Relcool Documentation',
-     [u'Eric B MErritt'], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output ------------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-  ('index', 'Relcool', u'Relcool Documentation',
-   u'Eric B MErritt', 'Relcool', 'One line description of project.',
-   'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-
-# -- Options for Epub output ---------------------------------------------------
-
-# Bibliographic Dublin Core info.
-epub_title = u'Relcool'
-epub_author = u'Eric B MErritt'
-epub_publisher = u'Eric B MErritt'
-epub_copyright = u'2012, Eric B MErritt'
-
-# The language of the text. It defaults to the language option
-# or en if the language is not set.
-#epub_language = ''
-
-# The scheme of the identifier. Typical schemes are ISBN or URL.
-#epub_scheme = ''
-
-# The unique identifier of the text. This can be a ISBN number
-# or the project homepage.
-#epub_identifier = ''
-
-# A unique identification for the text.
-#epub_uid = ''
-
-# A tuple containing the cover image and cover page html template filenames.
-#epub_cover = ()
-
-# HTML files that should be inserted before the pages created by sphinx.
-# The format is a list of tuples containing the path and title.
-#epub_pre_files = []
-
-# HTML files shat should be inserted after the pages created by sphinx.
-# The format is a list of tuples containing the path and title.
-#epub_post_files = []
-
-# A list of files that should not be packed into the epub file.
-#epub_exclude_files = []
-
-# The depth of the table of contents in toc.ncx.
-#epub_tocdepth = 3
-
-# Allow duplicate toc entries.
-#epub_tocdup = True
diff --git a/docs/configuration.rst b/docs/configuration.rst
deleted file mode 100644
index 4e84deb..0000000
--- a/docs/configuration.rst
+++ /dev/null
@@ -1,89 +0,0 @@
-Configuration
-=============
-
-Configuration of reltool is done via Erlang key, value elements in the
-`relcool.config` file. There are various configuration elements that
-can appear, each affects the running of the system in specific
-ways. Note that these must be complete Erlang terms terminated by a
-`.`.
-
-Paths
------
-
-Paths is a way to add additional code paths (that point to Erlang beam
-files) to the system. These are not used for dependency resolution,
-they are only used as code paths. The main use for this is simply to
-provide a non-resolvable path for additional providers.
-
-the path confuration element looks as follows::
-
-    {paths, [<list of directory paths>]}.
-
-So if we wanted to add `/usr/local/lib` and `/opt/lib` to the code
-paths for the system we could add the following::
-
-    {paths, ["/usr/local/lib", "/opt/lib"]}.
-
-to our configuration.
-
-Providers
----------
-
-Providers are how the Relcool system can be extended by a user. They
-are basically Erlang modules that implement the `rcl_provider`
-behaviour and are available via a code path. See the section on
-providers for more information.
-
-The `providers` element provides a completely new list of providers,
-replacing any providers that may already exist. The provider element
-is as follows::
-
-     {providers, <list of module names>}.
-
-Lets say I have three providers; `my_custom_assembler`,
-`my_rpm_assembler` and `my_deb_assembler`. I could make these the
-complete list of providers by doing the following in my config::
-
-    {providers, [my_custom_assembler,
-                 my_rpm_assembler,
-                 my_deb_assembler]}.
-
-Order is important in the providers as they will be executed in the
-order specified.
-
-Add Providers
--------------
-
-`add_providers` is very similar to `providers` with the exception that
-the listed providers are added to the end of the current list of
-providers rather then replacing the list all together. Add providres
-looks as follows::
-
-
-     {add_providers, <list of module names>}.
-
-Lets take our previous example but only add `my_rpm_assembler` and
-`my_deb_assembler` to the existing list of providers. We do this by
-adding the following::
-
-    {add_providers, [my_rpm_assembler,
-                     my_deb_assembler]}.
-
-Releases
---------
-
-Release configuration is the bread and butter, the blood and bones of
-the Relcool system. It provides the framework for realizing
-dependencies in the system. The release element basically minics the
-standard _Erlang/OTP Release Metadata file format:
-http://www.erlang.org/doc/man/rel.html. There are two main
-differences. The first is that you don't have to specify a complete
-list of applications and you may specify version constraints instead
-of hard versions.
-
-
-{release, {relname, vsn},
-  app goals}
-{release, {relname, vsn},
-{erts, vsn},
-app goals}
diff --git a/docs/docs.mkf b/docs/docs.mkf
deleted file mode 100644
index 6987063..0000000
--- a/docs/docs.mkf
+++ /dev/null
@@ -1,154 +0,0 @@
-# -*- mode: Makefile; fill-column: 80; comment-column: 75; -*-
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = _build
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-doc-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-
-doc-clean:
-	-rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Relcool.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Relcool.qhc"
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/Relcool"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Relcool"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
diff --git a/docs/index.rst b/docs/index.rst
deleted file mode 100644
index f367ef8..0000000
--- a/docs/index.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-.. Relcool documentation master file, created by
-   sphinx-quickstart on Mon Sep 10 10:04:06 2012.
-   You can adapt this file completely to your liking, but it should at least
-   contain the root `toctree` directive.
-
-Welcome to Relcool's documentation!
-===================================
-
-Contents:
-
-.. toctree::
-   :maxdepth: 2
-
-
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
-
diff --git a/docs/overview.rst b/docs/overview.rst
deleted file mode 100644
index 77453a3..0000000
--- a/docs/overview.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-Overview
-========
-
-Relcool is a tool that, given a specification, assembles
-releases. That is it makes an assessment of all of the Erlang/OTP Apps
-available to it and the constraints that you supply as part of your
-configuration and resolves a complete set of OTP Applications and
-thier versions for use in the release. This may be a bit hard to
-understand if you are not familiar with the way version resolutions
-work in package management systems. So lets look at an example.
-
-Lets say that you have the following OTP Applications
-
-* app1-1.2
-   with dependencies::
-     app2
-     app5
-     app6
-* app1-1.3
-   with dependencies::
-     app2
-     app6
-* app2-2.0
-  with dependencies::
-    app6
-* app2-2.1
-    with dependencies::
-    app6
-    app7
-* app3-2.0
-* app4-1.0.0
-* app5-3.0
-* app6-1.0
-  with dependencies::
-   app3
-* app7-2.0
-
-This is the world of OTP Apps your Relcool knows about (basically OTP
-Apps in the Library Directories you have specified). You have set a
-config that looks like the following::
-
-    {release, {awesome_supercool, "1.0"},
-        [{app1, "1.3", '>='},
-         {app2, "2.0", '>'},
-         app3]}
-
-When the Relcool process has run you will end up with a complete release as follows::
-
-    {release, {awesome_supercool, "1.0"},
-      [{app1, "1.3"},
-       {app2, "2.1"},
-       {app3, "2.0"},
-       {app6, "1.0"},
-       {app7, "2.0"}]}
-
-As you can see that is a fully realied view of your direct and
-transative dependencies based on the world that Relcool knows about
-and the constraints that you specified in your configuration.