| Age | Commit message (Collapse) | Author |
|---|
|
This includes Websocket over HTTP/3.
Since quicer, which provides the QUIC implementation,
is a NIF, Cowboy cannot depend directly on it. In order
to enable QUIC and HTTP/3, users have to set the
COWBOY_QUICER environment variable:
export COWBOY_QUICER=1
In order to run the test suites, the same must be done
for Gun:
export GUN_QUICER=1
HTTP/3 support is currently not available on Windows
due to compilation issues of quicer which have yet to
be looked at or resolved.
HTTP/3 support is also unavailable on the upcoming
OTP-27 due to compilation errors in quicer dependencies.
Once resolved HTTP/3 should work on OTP-27.
Because of how QUIC currently works, it's possible
that streams that get reset after sending a response
do not receive that response. The test suite was
modified to accomodate for that. A future extension
to QUIC will allow us to gracefully reset streams.
This also updates Erlang.mk.
|
|
|
|
|
|
|
|
A new option reset_idle_timeout_on_send has been added.
When set to 'true', the idle timeout is reset not only
when data is received, but also when data is sent.
This allows sending large responses without having to
worry about timeouts triggering.
The default is currently unchanged but might change in
a future release.
LH: Greatly reworked the implementation so that the
timeout gets reset on almost all socket writes.
This essentially completely supersets the original
work. Tests are mostly the same although I
refactored a bit to avoid test code duplication.
This commit also changes HTTP/2 behavior a little when
data is received: Cowboy will not attempt to update the
window before running stream handler commands to avoid
sending WINDOW_UPDATE frames twice. Now it has some
small heuristic to ensure they can only be sent once
at most.
|
|
|
|
Doing so will let us notice when the connection is gone instead
of waiting for timeouts, at least in the cases where the remote
socket was closed properly. Timeouts are still needed in case
of TCP half-open problems.
This change means that the order of stream handler commands is
more important than before because socket errors may occur
during the processing of commands.
|
|
Co-authored-by: Björn Svensson <[email protected]>
|
|
|
|
... to ensure that the same values are used in all places.
|
|
Note: This commit makes cowboy depend on cowlib master.
Graceful shutdown for HTTP/2:
1. A GOAWAY frame with the last stream id set to 2^31-1 is sent and a
timer is started (goaway_initial_timeout, default 1000ms), to wait
for any in-flight requests sent by the client, and the status is set
to 'closing_initiated'. If the client responds with GOAWAY and closes
the connection, we're done.
2. A second GOAWAY frame is sent with the actual last stream id and the
status is set to 'closing'. If no streams exist, the connection
terminates. Otherwise a second timer (goaway_complete_timeout,
default 3000ms) is started, to wait for the streams to complete. New
streams are not accepted when status is 'closing'.
3. If all streams haven't completed after the second timeout, the
connection is forcefully terminated.
Graceful shutdown for HTTP/1.x:
1. If a request is currently being handled, it is waited for and the
response is sent back to the client with the header "Connection:
close". Then, the connection is closed.
2. If the current request handler is not finished within the time
configured in transport option 'shutdown' (default 5000ms), the
connection process is killed by its supervisor (ranch).
Implemented for HTTP/1.x and HTTP/2 in the following scenarios:
* When receiving exit signal 'shutdown' from the supervisor (e.g. when
cowboy:stop_listener/3 is called).
* When a connection process is requested to terminate using
sys:terminate/2,3.
LH: Edited tests a bit and added todos for useful tests to add.
|
|
This is mostly to ensure that the GOAWAY frame is properly
received on Windows in some tests, but should be benefitial
also in production in particular when clients are slower.
|
|
Allow 10000 frames every 10 seconds instead of just 1000,
as the limit was too quickly reached in some deployments.
|
|
This reduces the number of times we need to ask for more packets,
and as a result we get a fairly large boost in performance,
especially with HTTP/1.1.
Unfortunately this makes Cowboy require at least Erlang/OTP 21.3+
because the ssl application did not have active,N. For simplicity
the version required will be Erlang/OTP 22+.
In addition this change improves hibernate handling in
cowboy_websocket. Hibernate will now work for HTTP/2 transport
as well, and stray or unrelated messages will no longer cancel
hibernate (the process will handle the message and go back into
hibernation).
Thanks go to Stressgrid for benchmarking an early version of this
commit: https://stressgrid.com/blog/cowboy_performance_part_2/
|
|
When sending a complete response it is far more efficient
to send the headers and the body in one Transport:send/2
call instead of two or more, at least for small responses.
This is the HTTP/2 counterpart to what was done for HTTP/1.1
many years ago in bfab8d4b22d858e7cffa97d04210a62fae56681c.
In HTTP/2's case however the implementation is a little
more difficult due to flow control. On the other hand the
optimization will apply not only for headers/body but also
for the body of multiple separate responses, which may need
to be sent all at the same time when we receive a WINDOW_UPDATE
frame.
When a body is sent using sendfile however a separate call
is still made.
|
|
It has been deprecated in OTP and the new way is available
on all supported OTP versions.
|
|
|
|
|
|
|
|
Now both HTTP/1.1 and HTTP/2 follow the documented format.
HTTP/1.1 was including an extra element containing the
StreamID before, which was unnecessary because it is also
given as argument to the callback.
HTTP/2 early_error will now include headers in its PartialReq.
|
|
|
|
A number of HTTP/2 CVEs were documented recently:
https://www.kb.cert.org/vuls/id/605641/
This commit, along with a few changes and additions in Cowlib,
fix or improve protection against all of them.
For CVE-2019-9511, also known as Data Dribble, the new option
stream_window_data_threshold can be used to control how little
the DATA frames that Cowboy sends can get.
For CVE-2019-9516, also known as 0-Length Headers Leak, Cowboy
will now simply reject streams containing 0-length header names.
For CVE-2019-9517, also known as Internal Data Buffering, the
backpressure changes were already pretty good at preventing this
issue, but a new option max_connection_buffer_size was added for
even better control over how much memory we are willing to allocate.
For CVE-2019-9512, also known as Ping Flood; CVE-2019-9515, also
known as Settings Flood; CVE-2019-9518, also known as Empty Frame
Flooding; and similar undocumented scenarios, a frame rate limiting
mechanism was added. By default Cowboy will now allow 1000 frames
every 10 seconds. This can be configured via max_received_frame_rate.
For CVE-2019-9514, also known as Reset Flood, another rate limiting
mechanism was added and can be configured via max_reset_stream_rate.
By default Cowboy will do up to 10 stream resets every 10 seconds.
Finally, nothing was done for CVE-2019-9513, also known as Resource
Loop, because Cowboy does not currently implement the HTTP/2
priority mechanism (in parts because these issues were well known
from the start).
Tests were added for all cases except Internal Data Buffering,
which I'm not sure how to test, and Resource Loop, which is not
currently relevant.
|
|
|
|
This should limit the amount of memory that Cowboy is using
when a handler is sending data much faster than the network.
The new max_stream_buffer_size is a soft limit and only has
an effect when the cowboy_stream_h handler is used.
|
|
For long-running connections it was possible for the connection
window to become larger than allowed by the protocol because the
window increases claimed by stream handlers were never reclaimed
even if no data was consumed.
The new code applies heuristics to fix this and reduce the number
of WINDOW_UPDATE frames that are sent. It includes six new options
to control that behavior: margin, max and threshold for both the
connection and stream windows. The margin is some extra space
added on top of the requested read size. The max is the maximum
window size at any given time. The threshold is a minimum window
size that must be reached before we even consider sending more
WINDOW_UPDATE frames. We also avoid sending WINDOW_UPDATE frames
when there is already enough space in the window, or when the
read size is 0.
Cowlib is set to master until a new tag is done.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Also changes the behavior to disable buffering by default, so
that the default works in all cases, including server-sent events.
|
|
It is now possible to stream one or more sendfile tuples.
A simple example of what can now be done would be for
example to build a tar file on the fly using the sendfile
syscall for sending the files, or to support Range requests
with more than one range with the sendfile syscall.
When using cowboy_compress_h unfortunately we have to read
the file in order to send it. More options will be added
at a later time to make sure users don't read too much
into memory. This is a new feature however so existing
code is not affected.
Also rework cowboy_http's data sending to be flatter.
|
|
|
|
Currently the compression threshold is set to 300 and hardcoded in the
codebase. There are cases where it make sense to allow this to be
configured, for instance when you want to enforce all responses to be
compressed regarldess of their size.
|
|
|
|
Depend on Ranch master for now since it isn't in any release yet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The new module is a merge of the Cowboy and Gun HTTP/2
state machines. Using a common code will help future
developments rather than duplicating the work.
A notable change is in how streams are terminated
when the handler stops before the body is sent. The
cowboy_stream:terminate function is now called only
after the body has been sent fully (or the stream
is reset in-between), not when the stop command is
returned. This will most likely have an impact on
metrics but will be closer to reality.
I had to comment a broken test in rfc7231_SUITE that
was cheating, cheating is no longer possible.
This depends on Cowlib master for the time being. A
new Cowlib version will be released once both Cowboy
and Gun are ported to use cow_http2_machine and I'm
satisfied with it.
|
|
when settings_timeout is infinity
|
|
|
|
This commit reworks the logging that Cowboy does via
error_logger to make the module that will do the actual
logging configurable.
The logger module interface must be the same as logger
and lager: a separate function per log level with the
same log levels they support.
The default behavior remains to call error_logger,
although some messages were downgraded to warnings
instead of errors. Since error_logger only supports
three different log levels, some messages may get
downgraded/upgraded depending on what the original
log level was to make them compatible with error_logger.
The {log, Level, Format, Args} command was also
added to stream handlers. Stream handlers should
use this command to log messages because it allows
writing a stream handler to intercept some of those
messages and extract information or block them as
necessary.
The logger option only applies to Cowboy itself,
not to the messages Ranch logs, so more work remains
to be done in that area.
|
|
|
|
This fixes curl when fetching resources that use push.
|
