diff options
Diffstat (limited to 'vendor/SDL/include/SDL_assert.h')
| -rw-r--r-- | vendor/SDL/include/SDL_assert.h | 291 |
1 files changed, 291 insertions, 0 deletions
diff --git a/vendor/SDL/include/SDL_assert.h b/vendor/SDL/include/SDL_assert.h new file mode 100644 index 0000000..90abbe3 --- /dev/null +++ b/vendor/SDL/include/SDL_assert.h @@ -0,0 +1,291 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2017 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef SDL_assert_h_ +#define SDL_assert_h_ + +#include "SDL_config.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef SDL_ASSERT_LEVEL +#ifdef SDL_DEFAULT_ASSERT_LEVEL +#define SDL_ASSERT_LEVEL SDL_DEFAULT_ASSERT_LEVEL +#elif defined(_DEBUG) || defined(DEBUG) || \ + (defined(__GNUC__) && !defined(__OPTIMIZE__)) +#define SDL_ASSERT_LEVEL 2 +#else +#define SDL_ASSERT_LEVEL 1 +#endif +#endif /* SDL_ASSERT_LEVEL */ + +/* +These are macros and not first class functions so that the debugger breaks +on the assertion line and not in some random guts of SDL, and so each +assert can have unique static variables associated with it. +*/ + +#if defined(_MSC_VER) +/* Don't include intrin.h here because it contains C++ code */ + extern void __cdecl __debugbreak(void); + #define SDL_TriggerBreakpoint() __debugbreak() +#elif ( (!defined(__NACL__)) && ((defined(__GNUC__) || defined(__clang__)) && (defined(__i386__) || defined(__x86_64__))) ) + #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "int $3\n\t" ) +#elif defined(__386__) && defined(__WATCOMC__) + #define SDL_TriggerBreakpoint() { _asm { int 0x03 } } +#elif defined(HAVE_SIGNAL_H) && !defined(__WATCOMC__) + #include <signal.h> + #define SDL_TriggerBreakpoint() raise(SIGTRAP) +#else + /* How do we trigger breakpoints on this platform? */ + #define SDL_TriggerBreakpoint() +#endif + +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 supports __func__ as a standard. */ +# define SDL_FUNCTION __func__ +#elif ((__GNUC__ >= 2) || defined(_MSC_VER) || defined (__WATCOMC__)) +# define SDL_FUNCTION __FUNCTION__ +#else +# define SDL_FUNCTION "???" +#endif +#define SDL_FILE __FILE__ +#define SDL_LINE __LINE__ + +/* +sizeof (x) makes the compiler still parse the expression even without +assertions enabled, so the code is always checked at compile time, but +doesn't actually generate code for it, so there are no side effects or +expensive checks at run time, just the constant size of what x WOULD be, +which presumably gets optimized out as unused. +This also solves the problem of... + + int somevalue = blah(); + SDL_assert(somevalue == 1); + +...which would cause compiles to complain that somevalue is unused if we +disable assertions. +*/ + +/* "while (0,0)" fools Microsoft's compiler's /W4 warning level into thinking + this condition isn't constant. And looks like an owl's face! */ +#ifdef _MSC_VER /* stupid /W4 warnings. */ +#define SDL_NULL_WHILE_LOOP_CONDITION (0,0) +#else +#define SDL_NULL_WHILE_LOOP_CONDITION (0) +#endif + +#define SDL_disabled_assert(condition) \ + do { (void) sizeof ((condition)); } while (SDL_NULL_WHILE_LOOP_CONDITION) + +typedef enum +{ + SDL_ASSERTION_RETRY, /**< Retry the assert immediately. */ + SDL_ASSERTION_BREAK, /**< Make the debugger trigger a breakpoint. */ + SDL_ASSERTION_ABORT, /**< Terminate the program. */ + SDL_ASSERTION_IGNORE, /**< Ignore the assert. */ + SDL_ASSERTION_ALWAYS_IGNORE /**< Ignore the assert from now on. */ +} SDL_AssertState; + +typedef struct SDL_AssertData +{ + int always_ignore; + unsigned int trigger_count; + const char *condition; + const char *filename; + int linenum; + const char *function; + const struct SDL_AssertData *next; +} SDL_AssertData; + +#if (SDL_ASSERT_LEVEL > 0) + +/* Never call this directly. Use the SDL_assert* macros. */ +extern DECLSPEC SDL_AssertState SDLCALL SDL_ReportAssertion(SDL_AssertData *, + const char *, + const char *, int) +#if defined(__clang__) +#if __has_feature(attribute_analyzer_noreturn) +/* this tells Clang's static analysis that we're a custom assert function, + and that the analyzer should assume the condition was always true past this + SDL_assert test. */ + __attribute__((analyzer_noreturn)) +#endif +#endif +; + +/* the do {} while(0) avoids dangling else problems: + if (x) SDL_assert(y); else blah(); + ... without the do/while, the "else" could attach to this macro's "if". + We try to handle just the minimum we need here in a macro...the loop, + the static vars, and break points. The heavy lifting is handled in + SDL_ReportAssertion(), in SDL_assert.c. +*/ +#define SDL_enabled_assert(condition) \ + do { \ + while ( !(condition) ) { \ + static struct SDL_AssertData sdl_assert_data = { \ + 0, 0, #condition, 0, 0, 0, 0 \ + }; \ + const SDL_AssertState sdl_assert_state = SDL_ReportAssertion(&sdl_assert_data, SDL_FUNCTION, SDL_FILE, SDL_LINE); \ + if (sdl_assert_state == SDL_ASSERTION_RETRY) { \ + continue; /* go again. */ \ + } else if (sdl_assert_state == SDL_ASSERTION_BREAK) { \ + SDL_TriggerBreakpoint(); \ + } \ + break; /* not retrying. */ \ + } \ + } while (SDL_NULL_WHILE_LOOP_CONDITION) + +#endif /* enabled assertions support code */ + +/* Enable various levels of assertions. */ +#if SDL_ASSERT_LEVEL == 0 /* assertions disabled */ +# define SDL_assert(condition) SDL_disabled_assert(condition) +# define SDL_assert_release(condition) SDL_disabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 1 /* release settings. */ +# define SDL_assert(condition) SDL_disabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 2 /* normal settings. */ +# define SDL_assert(condition) SDL_enabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 3 /* paranoid settings. */ +# define SDL_assert(condition) SDL_enabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_enabled_assert(condition) +#else +# error Unknown assertion level. +#endif + +/* this assertion is never disabled at any level. */ +#define SDL_assert_always(condition) SDL_enabled_assert(condition) + + +typedef SDL_AssertState (SDLCALL *SDL_AssertionHandler)( + const SDL_AssertData* data, void* userdata); + +/** + * \brief Set an application-defined assertion handler. + * + * This allows an app to show its own assertion UI and/or force the + * response to an assertion failure. If the app doesn't provide this, SDL + * will try to do the right thing, popping up a system-specific GUI dialog, + * and probably minimizing any fullscreen windows. + * + * This callback may fire from any thread, but it runs wrapped in a mutex, so + * it will only fire from one thread at a time. + * + * Setting the callback to NULL restores SDL's original internal handler. + * + * This callback is NOT reset to SDL's internal handler upon SDL_Quit()! + * + * Return SDL_AssertState value of how to handle the assertion failure. + * + * \param handler Callback function, called when an assertion fails. + * \param userdata A pointer passed to the callback as-is. + */ +extern DECLSPEC void SDLCALL SDL_SetAssertionHandler( + SDL_AssertionHandler handler, + void *userdata); + +/** + * \brief Get the default assertion handler. + * + * This returns the function pointer that is called by default when an + * assertion is triggered. This is an internal function provided by SDL, + * that is used for assertions when SDL_SetAssertionHandler() hasn't been + * used to provide a different function. + * + * \return The default SDL_AssertionHandler that is called when an assert triggers. + */ +extern DECLSPEC SDL_AssertionHandler SDLCALL SDL_GetDefaultAssertionHandler(void); + +/** + * \brief Get the current assertion handler. + * + * This returns the function pointer that is called when an assertion is + * triggered. This is either the value last passed to + * SDL_SetAssertionHandler(), or if no application-specified function is + * set, is equivalent to calling SDL_GetDefaultAssertionHandler(). + * + * \param puserdata Pointer to a void*, which will store the "userdata" + * pointer that was passed to SDL_SetAssertionHandler(). + * This value will always be NULL for the default handler. + * If you don't care about this data, it is safe to pass + * a NULL pointer to this function to ignore it. + * \return The SDL_AssertionHandler that is called when an assert triggers. + */ +extern DECLSPEC SDL_AssertionHandler SDLCALL SDL_GetAssertionHandler(void **puserdata); + +/** + * \brief Get a list of all assertion failures. + * + * Get all assertions triggered since last call to SDL_ResetAssertionReport(), + * or the start of the program. + * + * The proper way to examine this data looks something like this: + * + * <code> + * const SDL_AssertData *item = SDL_GetAssertionReport(); + * while (item) { + * printf("'%s', %s (%s:%d), triggered %u times, always ignore: %s.\\n", + * item->condition, item->function, item->filename, + * item->linenum, item->trigger_count, + * item->always_ignore ? "yes" : "no"); + * item = item->next; + * } + * </code> + * + * \return List of all assertions. + * \sa SDL_ResetAssertionReport + */ +extern DECLSPEC const SDL_AssertData * SDLCALL SDL_GetAssertionReport(void); + +/** + * \brief Reset the list of all assertion failures. + * + * Reset list of all assertions triggered. + * + * \sa SDL_GetAssertionReport + */ +extern DECLSPEC void SDLCALL SDL_ResetAssertionReport(void); + + +/* these had wrong naming conventions until 2.0.4. Please update your app! */ +#define SDL_assert_state SDL_AssertState +#define SDL_assert_data SDL_AssertData + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_assert_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ |