Remove SPDY; document HTTP/2

I just replaced "SPDY" with "HTTP/2" in the documentation.
I suspect that's all that's needed, but if there's something
off we can fix it later.

4 files changed, 40 insertions, 40 deletions

diff --git a/doc/src/guide/connect.asciidoc b/doc/src/guide/connect.asciidoc
index c2e887c..e0b09d6 100644
--- a/doc/src/guide/connect.asciidoc
+++ b/doc/src/guide/connect.asciidoc
@@ -5,10 +5,10 @@ a connection using the Gun client.
 
 === Gun connections
 
-Gun is designed with the SPDY and Websocket protocols in mind.
+Gun is designed with the HTTP/2 and Websocket protocols in mind.
 They are built for long-running connections that allow concurrent
 exchange of data, either in the form of request/responses for
-SPDY or in the form of messages for Websocket.
+HTTP/2 or in the form of messages for Websocket.
 
 A Gun connection is an Erlang process that manages a socket to
 a remote endpoint. This Gun connection is owned by a user
@@ -35,8 +35,8 @@ The `gun:open/{2,3}` function must be used to open a connection.
 
 If the port given is 443, Gun will attempt to connect using
 SSL. The protocol will be selected automatically using the
-NPN extension for TLS. By default Gun supports SPDY/3.1,
-SPDY/3 and HTTP/1.1 when connecting using SSL.
+ALPN extension for TLS. By default Gun supports HTTP/2
+and HTTP/1.1 when connecting using SSL.
 
 For any other port, Gun will attempt to connect using TCP
 and will use the HTTP/1.1 protocol.
diff --git a/doc/src/guide/http.asciidoc b/doc/src/guide/http.asciidoc
index e856fb1..ff4aa0a 100644
--- a/doc/src/guide/http.asciidoc
+++ b/doc/src/guide/http.asciidoc
@@ -1,7 +1,7 @@
 == HTTP
 
 This chapter describes how to use the Gun client for
-communicating with an HTTP/1.1 or SPDY server.
+communicating with an HTTP/1.1 or HTTP/2 server.
 
 === Streams
 
@@ -130,7 +130,7 @@ the request has no body.
 It is recommended to send the content-length header if you
 know it in advance, although this is not required. If it
 is not set, HTTP/1.1 will use the chunked transfer-encoding,
-and SPDY will continue normally as it is chunked by design.
+and HTTP/2 will continue normally as it is chunked by design.
 
 .POST "/organizations/ninenines" with delayed body
 
@@ -234,7 +234,7 @@ data messages following. If it contains `fin` there will be
 no data messages. If it contains `nofin` then one or more data
 messages will follow.
 
-When using SPDY this value is sent with the frame and simply
+When using HTTP/2 this value is sent with the frame and simply
 passed on in the message. When using HTTP/1.1 however Gun must
 guess whether data will follow by looking at the response headers.
 
@@ -309,7 +309,7 @@ end.
 
 === Handling streams pushed by the server
 
-The SPDY protocol allows the server to push more than one
+The HTTP/2 protocol allows the server to push more than one
 resource for every request. It will start sending those
 extra resources before it starts sending the response itself,
 so Gun will send you `gun_push` messages before `gun_response`
diff --git a/doc/src/guide/introduction.asciidoc b/doc/src/guide/introduction.asciidoc
index 2914ef6..89f2ae7 100644
--- a/doc/src/guide/introduction.asciidoc
+++ b/doc/src/guide/introduction.asciidoc
@@ -1,10 +1,10 @@
 == Introduction
 
-Gun is an Erlang HTTP client with support for HTTP/1.1, SPDY and Websocket.
+Gun is an Erlang HTTP client with support for HTTP/1.1, HTTP/2 and Websocket.
 
 === Prerequisites
 
-Knowledge of Erlang, but also of the HTTP/1.1, SPDY and Websocket
+Knowledge of Erlang, but also of the HTTP/1.1, HTTP/2 and Websocket
 protocols is required in order to read this guide.
 
 === Supported platforms
diff --git a/doc/src/guide/protocols.asciidoc b/doc/src/guide/protocols.asciidoc
index 5e3b273..ae7705f 100644
--- a/doc/src/guide/protocols.asciidoc
+++ b/doc/src/guide/protocols.asciidoc
@@ -37,29 +37,29 @@ It provides the `gun:ws_upgrade/{2,3,4}` function for that
 purpose. A `gun_ws_upgrade` message will be sent on success;
 a `gun_response` message otherwise.
 
-=== SPDY
+=== HTTP/2
 
-SPDY is a binary protocol based on HTTP, compatible with
+HTTP/2 is a binary protocol based on HTTP, compatible with
 the HTTP semantics, that reduces the complexity of parsing
 requests and responses, compresses the HTTP headers and
 allows the server to push multiple responses to a single
 request.
 
-The SPDY interface is very similar to HTTP/1.1, so this
+The HTTP/2 interface is very similar to HTTP/1.1, so this
 section instead focuses on the differences in the interface
 for the two protocols.
 
-Because a SPDY server can push multiple responses to a
+Because a HTTP/2 server can push multiple responses to a
 single request, Gun might send `gun_push` messages for
 every push received. They can be ignored safely if they
 are not needed.
 
-The `gun:cancel/2` function will use the SPDY stream
+The `gun:cancel/2` function will use the HTTP/2 stream
 cancellation mechanism which allows Gun to inform the
 server to stop sending a response for this particular
 request, saving resources.
 
-It is not possible to upgrade a SPDY connection to Websocket
+It is not possible to upgrade an HTTP/2 connection to Websocket
 due to protocol limitations.
 
 === Websocket
@@ -87,33 +87,33 @@ current protocol.
 .Supported operations per protocol
 [cols="<,3*^",options="header"]
 |===
-| Operation  | HTTP/1.1 | SPDY | Websocket
-| delete     | yes      | yes  | no
-| get        | yes      | yes  | no
-| head       | yes      | yes  | no
-| options    | yes      | yes  | no
-| patch      | yes      | yes  | no
-| post       | yes      | yes  | no
-| put        | yes      | yes  | no
-| request    | yes      | yes  | no
-| data       | yes      | yes  | no
-| await      | yes      | yes  | no
-| await_body | yes      | yes  | no
-| flush      | yes      | yes  | no
-| cancel     | yes      | yes  | no
-| ws_upgrade | yes      | no   | no
-| ws_send    | no       | no   | yes
+| Operation  | HTTP/1.1 | HTTP/2 | Websocket
+| delete     | yes      | yes    | no
+| get        | yes      | yes    | no
+| head       | yes      | yes    | no
+| options    | yes      | yes    | no
+| patch      | yes      | yes    | no
+| post       | yes      | yes    | no
+| put        | yes      | yes    | no
+| request    | yes      | yes    | no
+| data       | yes      | yes    | no
+| await      | yes      | yes    | no
+| await_body | yes      | yes    | no
+| flush      | yes      | yes    | no
+| cancel     | yes      | yes    | no
+| ws_upgrade | yes      | no     | no
+| ws_send    | no       | no     | yes
 |===
 
 .Messages sent per protocol
 [cols="<,3*^",options="header"]
 |===
-| Message               | HTTP/1.1 | SPDY | Websocket
-| gun_push              | no       | yes  | no
-| gun_response          | yes      | yes  | no
-| gun_data              | yes      | yes  | no
-| gun_error (StreamRef) | yes      | yes  | no
-| gun_error             | yes      | yes  | yes
-| gun_ws_upgrade        | yes      | no   | no
-| gun_ws                | no       | no   | yes
+| Message               | HTTP/1.1 | HTTP/2 | Websocket
+| gun_push              | no       | yes    | no
+| gun_response          | yes      | yes    | no
+| gun_data              | yes      | yes    | no
+| gun_error (StreamRef) | yes      | yes    | no
+| gun_error             | yes      | yes    | yes
+| gun_ws_upgrade        | yes      | no     | no
+| gun_ws                | no       | no     | yes
 |===