#
# %CopyrightBegin%
#
# Copyright Ericsson AB 1998-2013. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# %CopyrightEnd%
# Toplevel makefile for building the Erlang system
#
.NOTPARALLEL:
# ----------------------------------------------------------------------
# And you'd think that this would be obvious... :-)
SHELL = /bin/sh
# The top directory in which Erlang is unpacked
ERL_TOP = @ERL_TOP@
# OTP release
OTP = OTP-@OTP_REL@
# erts (Erlang RunTime System) version
ERTS = erts-@ERTS_VSN@
# Include verbose output variables
include $(ERL_TOP)/make/output.mk
# ----------------------------------------------------------------------
#
# The variables below control where Erlang is installed. They are
# configurable (unless otherwise stated). Some of them are best
# changed by giving special arguments to configure instead of changing
# them in this file. Note: If you change them in Makefile, instead of
# Makefile.in your changes will be lost the next time you run
# configure.
#
# prefix from configure, default is /usr/local (must be an absolute path)
prefix = @prefix@
exec_prefix = @exec_prefix@
# Locations where we should install according to configure. These location
# may be prefixed by $(DESTDIR) and/or $(EXTRA_PREFIX) (see below).
bindir = @bindir@
libdir = @libdir@
# Where Erlang/OTP is located
libdir_suffix = /erlang
erlang_libdir = $(libdir)$(libdir_suffix)
erlang_bindir = $(erlang_libdir)/bin
#
# By default we install relative symbolic links for $(ERL_BASE_PUB_FILES)
# from $(bindir) to $(erlang_bindir) as long as they are both prefixed
# by $(exec_prefix) (and are otherwise reasonable). This behavior can be
# overridden by passing BINDIR_SYMLINKS=<HOW>, where <HOW> is either
# absolute or relative.
#
# $ make DESTDIR=<...> install
#
# DESTDIR can be set in case you want to install Erlang in a different
# location than where you have configured it to run. This can be
# useful, e.g. when installing on a server that stores the files with a
# different path than where the clients access them, when building
# rpms, or cross compiling, etc. DESTDIR will prefix the actual
# installation which will only be able to run once the DESTDIR prefix
# has disappeard, e.g. the part after DESTDIR has been packed and
# unpacked without DESTDIR. The name DESTDIR have been chosen since it
# is the GNU coding standard way of doing it.
#
# If INSTALL_PREFIX is set but not DESTDIR, DESTDIR will be set to
# INSTALL_PREFIX. INSTALL_PREFIX has been buggy for a long time. It was
# initially intended to have the same effect as DESTDIR. This effect was,
# however, lost even before it was first released :-( In all released OTP
# versions up to R13B03, INSTALL_PREFIX has behaved as EXTRA_PREFIX do
# today (see below).
ifeq ($(DESTDIR),)
ifneq ($(INSTALL_PREFIX),)
DESTDIR=$(INSTALL_PREFIX)
endif
else
ifneq ($(INSTALL_PREFIX),)
ifneq ($(DESTDIR),$(INSTALL_PREFIX))
$(error Both DESTDIR="$(DESTDIR)" and INSTALL_PREFIX="$(INSTALL_PREFIX)" have been set and have been set differently! Please, only set one of them)
endif
endif
endif
# $ make EXTRA_PREFIX=<...> install
#
# EXTRA_PREFIX behaves exactly as the buggy INSTALL_PREFIX behaved in
# pre R13B04 releases. It adds a prefix to all installation paths which
# will be used by the actuall installation. That is, the installation
# needs to be located at this location when run. This is useful if you
# want to try out the system, running test suites, etc, before doing the
# real install using the configuration you have set up using `configure'.
# A similar thing can be done by overriding `prefix' if only default
# installation directories are used. However, the installation can get
# sprawled out all over the place if the user use `--bindir', `--libdir',
# etc, and it is possible that `prefix' wont have any effect at all. That
# is, it is not at all the same thing as using EXTRA_PREFIX in the
# general case. It is also nice to be able to supply this feature if
# someone should have relied on the old buggy INSTALL_PREFIX.
# The directory in which user executables (ERL_BASE_PUB_FILES) are installed
BINDIR = $(DESTDIR)$(EXTRA_PREFIX)$(bindir)
#
# Erlang base public files
#
ERL_BASE_PUB_FILES=erl erlc epmd run_erl to_erl dialyzer typer escript ct_run
# ERLANG_INST_LIBDIR is the top directory where the Erlang installation
# will be located when running.
ERLANG_INST_LIBDIR=$(EXTRA_PREFIX)$(erlang_libdir)
ERLANG_INST_BINDIR= $(ERLANG_INST_LIBDIR)/bin
# ERLANG_LIBDIR is the top directory where the Erlang installation is copied
# during installation. If DESTDIR != "", it cannot be run from this location.
ERLANG_LIBDIR = $(DESTDIR)$(ERLANG_INST_LIBDIR)
# ----------------------------------------------------------------------
# This functionality has been lost along the way... :(
# It could perhaps be nice to reintroduce some day; therefore,
# it is not removed just commented out.
## # The directory in which man pages for above executables are put
## ERL_MAN1DIR = $(DESTDIR)$(EXTRA_PREFIX)@mandir@/man1
## ERL_MAN1EXT = 1
## # The directory in which Erlang private man pages are put. In order
## # not to clutter up the man namespace these are by default put in the
## # Erlang private directory $(ERLANG_LIBDIR)/man (\@erl_mandir\@ is set
## # to $(erlang_libdir)/man). If you want to install the man pages
## # together with the rest give the argument "--disable-erlang-mandir"
## # when you run configure, which will set \@erl_mandir\@ to \@mandir\@.
## # If you want a special suffix on the manpages set ERL_MANEXT to
## # this suffix, e.g. "erl"
## ERL_MANDIR = $(DESTDIR)$(EXTRA_PREFIX)@erl_mandir@
## ERL_MANEXT =
# ----------------------------------------------------------------------
# Must be GNU make!
MAKE = @MAKE_PROG@
NATIVE_LIBS_ENABLED = @NATIVE_LIBS_ENABLED@
ifeq ($(NATIVE_LIBS_ENABLED),yes)
HIPE_BOOTSTRAP_EBIN = boot_ebin
else
HIPE_BOOTSTRAP_EBIN = ebin
endif
# This should be set to the target "arch-vendor-os"
TARGET := @TARGET@
include $(ERL_TOP)/make/target.mk
export TARGET
include $(ERL_TOP)/make/otp_default_release_path.mk
BOOTSTRAP_ONLY = @BOOTSTRAP_ONLY@
CROSS_COMPILING = @CROSS_COMPILING@
ifeq ($(CROSS_COMPILING),yes)
INSTALL_CROSS = -cross
TARGET_HOST=$(shell $(ERL_TOP)/erts/autoconf/config.guess)
else
ifneq ($(DESTDIR),)
INSTALL_CROSS = -cross
else
INSTALL_CROSS =
endif
TARGET_HOST=
endif
# A BSD compatible install program
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
MKSUBDIRS = ${INSTALL} -d
# Program to create symbolic links
LN_S = @LN_S@
# Ranlib program, if not needed set to e.g. ":"
RANLIB = @RANLIB@
# ----------------------------------------------------------------------
# By default we require an Erlang/OTP of the same release as the one
# we cross compile.
ERL_XCOMP_FORCE_DIFFERENT_OTP = no
# ----------------------------------------------------------------------
#
# The directory where at least the primary bootstrap is placed under.
#
# We need to build to view private files in case we are in clearcase;
# therefore, we don't want BOOTSTRAP_TOP changed.
#
# PRIMARY_BOOTSTRAP_TOP would perhaps have been a better name...
#
override BOOTSTRAP_TOP = $(ERL_TOP)/bootstrap
# BOOTSTRAP_SRC_TOP is normally the same as BOOTSTRAP_TOP but
# it is allowed to be changed
BOOTSTRAP_SRC_TOP = $(BOOTSTRAP_TOP)
# Where to install the bootstrap directory.
#
# Typically one might want to set this to a fast local filesystem, or,
# the default, as ERL_TOP
BOOTSTRAP_ROOT = $(ERL_TOP)
# Directories which you need in the path if you wish to run the
# locally built system. (This can be put in front or back of the path
# depending on which system is preferred.)
LOCAL_PATH = $(ERL_TOP)/erts/bin/$(TARGET):$(ERL_TOP)/erts/bin
ifeq ($(TARGET),win32)
BOOT_PREFIX=$(WIN32_WRAPPER_PATH):$(BOOTSTRAP_ROOT)/bootstrap/bin:
TEST_PATH_PREFIX=$(WIN32_WRAPPER_PATH):$(ERL_TOP)/bin/win32:
else
BOOT_PREFIX=$(BOOTSTRAP_ROOT)/bootstrap/bin:
TEST_PATH_PREFIX=$(ERL_TOP)/bin/$(TARGET_HOST):
endif
# ----------------------------------------------------------------------
# The following is currently only used for determining what to prevent
# usage of during strict install or release.
include $(ERL_TOP)/make/$(TARGET)/otp_ded.mk
CC = @CC@
LD = @LD@
CXX = @CXX@
IBIN_DIR = $(ERL_TOP)/ibin
#
# If $(OTP_STRICT_INSTALL) equals `yes' we prefix the PATH with $(IBIN_DIR)
# when doing `release' or `install'. This directory contains `erlc', `gcc',
# `ld' etc, that unconditionally will fail if used. This is used during the
# daily builds in order to pick up on things being erroneously built during
# the `release' and `install' phases.
#
INST_FORBID = gcc g++ cc c++ cxx cl gcc.sh cc.sh ld ld.sh
INST_FORBID += javac.sh javac guavac gcj jikes bock
INST_FORBID += $(notdir $(CC)) $(notdir $(LD)) $(notdir $(CXX))
INST_FORBID += $(notdir $(DED_CC)) $(notdir $(DED_LD))
INST_FORBID += $(ERL_BASE_PUB_FILES)
IBIN_FILES = $(addprefix $(IBIN_DIR)/,$(sort $(INST_FORBID))) # sort will
# remove
# duplicates
ifeq ($(OTP_STRICT_INSTALL),yes)
INST_PATH_PREFIX=$(IBIN_DIR):
INST_DEP = strict_install
ifneq ($(CROSS_COMPILING),yes)
INST_DEP += strict_install_all_bootstraps
endif
else # --- Normal case, i.e., not strict install ---
#
# By default we allow build during install and release phase; therefore,
# make sure that the bootstrap system is available in the path.
#
INST_PATH_PREFIX=$(BOOT_PREFIX)
# If cross compiling `erlc', in path might have be used; therefore,
# avoid triggering a bootstrap build...
INST_DEP =
ifneq ($(CROSS_COMPILING),yes)
INST_DEP += all_bootstraps
endif
endif # --- Normal case, i.e., not strict install ---
# ----------------------------------------------------------------------
# Fix up RELEASE_ROOT/TESTROOT havoc
ifeq ($(RELEASE_ROOT),)
ifneq ($(TESTROOT),)
RELEASE_ROOT = $(TESTROOT)
endif
endif
# ----------------------------------------------------------------------
# A default for the release_tests, not same target dir as release.
# More TESTROOT havoc...
ifeq ($(TESTSUITE_ROOT),)
ifneq ($(TESTROOT),)
TESTSUITE_ROOT = $(TESTROOT)
else
TESTSUITE_ROOT = $(ERL_TOP)/release/tests
endif
endif
#
# The steps to build a working system are:
# * build an emulator
# * setup the erl and erlc program in bootstrap/bin
# * optionally run pgo and build optimized emulator
# * build additional compilers and copy them into bootstrap/lib
# * use the bootstrap erl and erlc to build all the libs
#
.PHONY: all bootstrap all_bootstraps
ifneq ($(CROSS_COMPILING),yes)
# Not cross compiling
ifeq ($(BOOTSTRAP_ONLY),yes)
all: bootstrap
else
# The normal case; not cross compiling, and not bootstrap only build.
all: bootstrap libs local_setup
endif
else
# Cross compiling
all: cross_check_erl depend emulator libs start_scripts
endif
cross_check_erl:
@PATH=$(BOOT_PREFIX)"$${PATH}" $(ERL_TOP)/make/cross_check_erl \
-target $(TARGET) -otp $(OTP) -erl_top $(ERL_TOP) \
-force $(ERL_XCOMP_FORCE_DIFFERENT_OTP)
is_cross_configured:
@echo @CROSS_COMPILING@
target_configured:
@echo @TARGET@
bootstrap: depend all_bootstraps
ifeq ($(OTP_STRICT_INSTALL),yes)
.PHONY: strict_install_all_bootstraps
strict_install_all_bootstraps:
$(MAKE) BOOT_PREFIX=$(INST_PATH_PREFIX) OTP_STRICT_INSTALL=$(OTP_STRICT_INSTALL) all_bootstraps
endif
# With all bootstraps we mean all bootstrapping that is done when
# the system is delivered in open source, the primary
# bootstrap is not included, it requires a pre built emulator...
all_bootstraps: emulator \
bootstrap_setup \
secondary_bootstrap_build secondary_bootstrap_copy \
tertiary_bootstrap_build tertiary_bootstrap_copy
#
# Use these targets when you want to use the erl and erlc
# binaries in your PATH instead of those created from the
# pre-compiled Erlang modules under bootstrap/.
#
noboot:
$(MAKE) BOOT_PREFIX= emulator libs local_setup
noboot_install:
$(MAKE) BOOT_PREFIX= install
.PHONY: release release_docs
release: $(INST_DEP)
ifeq ($(OTP_SMALL_BUILD),true)
cd $(ERL_TOP)/lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)"$${PATH}" \
$(MAKE) TESTROOT="$(RELEASE_ROOT)" release
else
cd $(ERL_TOP)/lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)"$${PATH}" \
$(MAKE) BUILD_ALL=1 TESTROOT="$(RELEASE_ROOT)" release
endif
cd $(ERL_TOP)/erts && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)"$${PATH}" \
$(MAKE) BUILD_ALL=1 PROFILE=$(PROFILE) TESTROOT="$(RELEASE_ROOT)" release
ifeq ($(RELEASE_ROOT),)
$(INSTALL_DATA) "$(ERL_TOP)/OTP_VERSION" "$(OTP_DEFAULT_RELEASE_PATH)/releases/@OTP_REL@"
else
$(INSTALL_DATA) "$(ERL_TOP)/OTP_VERSION" "$(RELEASE_ROOT)/releases/@OTP_REL@"
endif
# ---------------------------------------------------------------
# Target only used when building commercial ERTS patches
# ---------------------------------------------------------------
release_docs docs: doc_bootstrap_build doc_bootstrap_copy mod2app
ifeq ($(OTP_SMALL_BUILD),true)
cd $(ERL_TOP)/lib && \
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) TESTROOT="$(RELEASE_ROOT)" DOCGEN=$(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen $@
else
cd $(ERL_TOP)/lib && \
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) BUILD_ALL=1 TESTROOT="$(RELEASE_ROOT)" DOCGEN=$(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen $@
endif
cd $(ERL_TOP)/erts && \
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) BUILD_ALL=1 TESTROOT="$(RELEASE_ROOT)" DOCGEN=$(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen $@
cd $(ERL_TOP)/system/doc && \
PATH=$(BOOT_PREFIX)"$${PATH}" \
ERL_TOP=$(ERL_TOP) $(MAKE) TESTROOT="$(RELEASE_ROOT)" DOCGEN=$(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen $@
ifneq ($(OTP_SMALL_BUILD),true)
echo "OTP doc built" > $(ERL_TOP)/make/otp_doc_built
endif
xmllint: docs
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) -C erts/ $@
ifeq ($(OTP_SMALL_BUILD),true)
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) -C lib/ $@
else
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) BUILD_ALL=1 -C lib/ $@
PATH=$(BOOT_PREFIX)"$${PATH}" ERL_TOP=$(ERL_TOP) \
$(MAKE) -C system/doc $@
endif
mod2app:
PATH=$(BOOT_PREFIX)"$${PATH}" escript $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/priv/bin/xref_mod_app.escript -topdir $(ERL_TOP) -outfile $(ERL_TOP)/make/$(TARGET)/mod2app.xml
# ----------------------------------------------------------------------
ERLANG_EARS=$(BOOTSTRAP_ROOT)/bootstrap/erts
ELINK=$(BOOTSTRAP_ROOT)/bootstrap/erts/bin/elink
BOOT_BINDIR=$(BOOTSTRAP_ROOT)/bootstrap/erts/bin
BEAM_EVM=$(ERL_TOP)/bin/$(TARGET)/beam_evm
BOOTSTRAP_COMPILER = $(BOOTSTRAP_TOP)/primary_compiler
# otp.mk is only used to figure out if we are doing PGO or not
include $(ERL_TOP)/make/$(TARGET)/otp.mk
.PHONY: emulator libs kernel stdlib compiler hipe syntax_tools preloaded
ifeq ($(USE_PGO), true)
PROFILE=use
PROFILE_EMU_DEPS=emulator_profile_generate bootstrap_setup
emulator_profile_generate:
$(make_verbose)cd erts && ERL_TOP=$(ERL_TOP) $(MAKE) NO_START_SCRIPTS=true $(TYPE) FLAVOR=$(FLAVOR) PROFILE=generate
else
PROFILE=
PROFILE_EMU_DEPS=
endif
emulator: $(PROFILE_EMU_DEPS)
$(make_verbose)cd erts && ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) NO_START_SCRIPTS=true $(TYPE) FLAVOR=$(FLAVOR) PROFILE=$(PROFILE)
libs:
ifeq ($(OTP_SMALL_BUILD),true)
$(make_verbose)cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt
else
$(make_verbose)cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
$(V_at)echo "OTP built" > $(ERL_TOP)/make/otp_built
endif
kernel:
$(make_verbose)cd lib/kernel && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
stdlib:
$(make_verbose)cd lib/stdlib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
compiler:
$(make_verbose)cd lib/compiler && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
hipe:
$(make_verbose)cd lib/hipe && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
syntax_tools:
$(make_verbose)cd lib/syntax_tools && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
preloaded:
$(make_verbose)cd erts/preloaded/src && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt BUILD_ALL=true
dep depend:
$(make_verbose)
$(V_at)test X"$$ERTS_SKIP_DEPEND" = X"true" || (cd erts/emulator && ERL_TOP=$(ERL_TOP) $(MAKE) generate)
$(V_at)test X"$$ERTS_SKIP_DEPEND" = X"true" || (cd erts/emulator && ERL_TOP=$(ERL_TOP) $(MAKE) depend)
$(V_at)test X"$$ERTS_SKIP_DEPEND" = X"true" || (cd erts/lib_src && ERL_TOP=$(ERL_TOP) $(MAKE) depend)
# Creates "erl" and "erlc" in bootstrap/bin which uses the precompiled
# libraries in the bootstrap directory
.PHONY: bootstrap_setup_target
# ----------------------------------------------------------------------
# Bootstraps...
# ----------------------------------------------------------------------
ifeq ($(TARGET),win32)
bootstrap_setup: check_recreate_primary_bootstrap bootstrap_setup_target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/erl.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erlc.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/escript.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl.ini \
$(BOOTSTRAP_ROOT)/bootstrap/bin/beam.dll
make_bootstrap_ini.sh $(BOOTSTRAP_ROOT)/bootstrap \
$(ERL_TOP)/bin/$(TARGET)
@cp $(ERL_TOP)/bin/$(TARGET)/erlc.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erlc.exe
@cp $(ERL_TOP)/bin/$(TARGET)/erl.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl.exe
@cp $(ERL_TOP)/bin/$(TARGET)/escript.exe \
$(BOOTSTRAP_ROOT)/bootstrap/bin/escript.exe
else
bootstrap_setup: check_recreate_primary_bootstrap bootstrap_setup_target $(BOOTSTRAP_ROOT)/bootstrap/bin/erl $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl: $(ERL_TOP)/erts/etc/unix/erl.src.src $(BOOTSTRAP_ROOT)/bootstrap/target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/erl
@sed -e "s;%FINAL_ROOTDIR%;$(BOOTSTRAP_ROOT)/bootstrap;" \
-e "s;\$$ROOTDIR/erts-.*/bin;$(ERL_TOP)/bin/$(TARGET);" \
-e "s;EMU=.*;EMU=beam$(TYPEMARKER);" \
$(ERL_TOP)/erts/etc/unix/erl.src.src > \
$(BOOTSTRAP_ROOT)/bootstrap/bin/erl
@chmod 755 $(BOOTSTRAP_ROOT)/bootstrap/bin/erl
$(BOOTSTRAP_ROOT)/bootstrap/bin/erlc: $(ERL_TOP)/bin/$(TARGET)/erlc $(BOOTSTRAP_ROOT)/bootstrap/target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc
@cp $(ERL_TOP)/bin/$(TARGET)/erlc $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc
@chmod 755 $(BOOTSTRAP_ROOT)/bootstrap/bin/erlc
$(BOOTSTRAP_ROOT)/bootstrap/bin/escript: $(ERL_TOP)/bin/$(TARGET)/escript $(BOOTSTRAP_ROOT)/bootstrap/target
@rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
@cp $(ERL_TOP)/bin/$(TARGET)/escript $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
@chmod 755 $(BOOTSTRAP_ROOT)/bootstrap/bin/escript
endif
bootstrap_setup_target:
@{ test -r $(BOOTSTRAP_ROOT)/bootstrap/target && \
test $(TARGET) = `cat $(BOOTSTRAP_ROOT)/bootstrap/target`; } || \
echo $(TARGET) > $(BOOTSTRAP_ROOT)/bootstrap/target
secondary_bootstrap_build:
$(make_verbose)cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt SECONDARY_BOOTSTRAP=true
secondary_bootstrap_copy:
$(make_verbose)
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin ; fi
$(V_at)for x in lib/hipe/$(HIPE_BOOTSTRAP_EBIN)/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/hipe/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include ; fi
$(V_at)for x in lib/parsetools/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp lib/parsetools/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/ebin
$(V_at)for x in lib/parsetools/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp -f lib/parsetools/include/*.hrl $(BOOTSTRAP_ROOT)/bootstrap/lib/parsetools/include
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1 ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1 ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src ; fi
$(V_at)for x in lib/asn1/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp lib/asn1/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/ebin
$(V_at)for x in lib/asn1/src/*.[eh]rl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp -f lib/asn1/src/*.erl lib/asn1/src/*.hrl $(BOOTSTRAP_ROOT)/bootstrap/lib/asn1/src
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl/include ; fi
$(V_at)for x in lib/xmerl/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
tertiary_bootstrap_build:
$(make_verbose)cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt TERTIARY_BOOTSTRAP=true
tertiary_bootstrap_copy:
$(make_verbose)
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/include ; fi
$(V_at)for x in lib/snmp/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp lib/snmp/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/snmp/ebin
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/include ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/wx ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/wx ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/ebin ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/wx/include ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/common_test ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/common_test ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/common_test/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/common_test/include ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/runtime_tools ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/runtime_tools ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/runtime_tools/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/runtime_tools/include ; fi
$(V_at)for x in lib/sasl/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp lib/sasl/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/sasl/ebin
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin ; fi
$(V_at)for x in lib/syntax_tools/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
$(V_at)for x in lib/wx/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/wx/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# copy wx_object to remove undef behaviour warnings
$(V_at)for x in lib/wx/ebin/wx_object.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/wx/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# copy test includes to be able to compile tests with bootstrap compiler
$(V_at)for x in lib/common_test/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/common_test/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# copy runtime_tool includes to be able to compile with include_lib
$(V_at)for x in lib/runtime_tools/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/runtime_tools/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# $(V_at)cp lib/syntax_tools/ebin/*.beam $(BOOTSTRAP_ROOT)/bootstrap/lib/syntax_tools/ebin
doc_bootstrap_build:
$(make_verbose)cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) opt DOC_BOOTSTRAP=true
doc_bootstrap_copy:
$(make_verbose)
# XMERL
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl/ebin ; fi
$(V_at)for x in lib/xmerl/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/xmerl/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# xmerl/include already copied in secondary bootstrap
# EDOC
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/edoc ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/edoc ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/edoc/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/edoc/ebin ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/edoc/include ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/edoc/include ; fi
$(V_at)for x in lib/edoc/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/edoc/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
$(V_at)for x in lib/edoc/include/*.hrl; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/edoc/include/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
# ERL_DOCGEN
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen ; fi
$(V_at)if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/ebin ; then mkdir $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/ebin ; fi
$(V_at)for x in lib/erl_docgen/ebin/*.beam; do \
BN=`basename $$x`; \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/ebin/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
done
$(V_at)for d in priv priv/bin priv/css priv/dtd priv/dtd_html_entities priv/dtd_man_entities priv/images priv/js priv/js/flipmenu priv/xsl; do \
if test ! -d $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/$$d ; then mkdir -p $(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/$$d ; fi; \
for x in lib/erl_docgen/$$d/*; do \
BN=`basename $$x`; \
if test ! -d lib/erl_docgen/$$d/$$BN ; then \
TF=$(BOOTSTRAP_ROOT)/bootstrap/lib/erl_docgen/$$d/$$BN; \
test -f $$TF && \
test '!' -z "`find $$x -newer $$TF -print`" && \
cp $$x $$TF; \
test '!' -f $$TF && \
cp $$x $$TF; \
true; \
fi; \
done; \
done
.PHONY: check_recreate_primary_bootstrap recreate_primary_bootstrap
#
# If the source is a prebuilt delivery, no $(ERL_TOP)/bootstrap/lib
# directory will exist. All applications part of the primary bootstrap
# are delivered prebuilt though. If it is a prebuilt delivery we need
# to recreate the primary bootstrap, from the prebuilt result.
#
# A prebuild delivery always contain a $(ERL_TOP)/prebuilt.files file.
# If no such file exists, we wont try to recreate the primary bootstrap,
# since it will just fail producing anything useful.
#
check_recreate_primary_bootstrap:
@if test -f $(ERL_TOP)/prebuilt.files ; then \
if test ! -d $(ERL_TOP)/bootstrap/lib ; then \
$(ERL_TOP)/otp_build save_bootstrap ; \
fi ; \
fi
#
# recreate_primary_bootstrap assumes that if $(ERL_TOP)/prebuilt.files
# exist, all build results needed already exist in the application specific
# directories of all applications part of the primary bootstrap.
#
recreate_primary_bootstrap:
$(V_at)$(ERL_TOP)/otp_build save_bootstrap
# The first bootstrap build is rarely (never) used in open source, it's
# used to build the shipped bootstrap directory. The Open source bootstrap
# stages start with secondary bootstrap.
#
# These are the ones used, the other ones (prefixed with old_) are for BC.
# These modules should stay in the kernel directory to make building
# of the emulator possible
.PHONY: primary_bootstrap \
primary_bootstrap_build \
primary_bootstrap_compiler \
primary_bootstrap_mkdirs \
primary_bootstrap_copy
primary_bootstrap:
@echo "=== Building a bootstrap compiler in $(BOOTSTRAP_ROOT)/bootstrap"
$(V_at)$(MAKE) BOOTSTRAP_ROOT=$(BOOTSTRAP_ROOT) \
ERL_TOP=$(ERL_TOP) \
bootstrap_clean
$(V_at)cd $(ERL_TOP) && \
$(MAKE) TESTROOT=$(BOOTSTRAP_TOP) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
primary_bootstrap_build
$(V_at)cd $(ERL_TOP) && \
$(MAKE) TESTROOT=$(BOOTSTRAP_TOP) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
primary_bootstrap_copy
$(V_at)cd $(ERL_TOP)/erts/start_scripts && \
$(MAKE) TESTROOT=$(BOOTSTRAP_TOP) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) bootstrap_scripts
$(V_at)test $(BOOTSTRAP_ROOT) = $(ERL_TOP) \
|| $(ERL_TOP)/otp_build \
copy_primary_bootstrap \
$(BOOTSTRAP_TOP) \
$(BOOTSTRAP_ROOT)
primary_bootstrap_build: primary_bootstrap_mkdirs primary_bootstrap_compiler \
primary_bootstrap_stdlib
$(make_verbose)cd lib && $(MAKE) ERLC_FLAGS='-pa $(BOOTSTRAP_COMPILER)/ebin' \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
BOOTSTRAP=1 opt
primary_bootstrap_compiler:
$(make_verbose)cd lib/compiler && $(MAKE) \
BOOTSTRAP_TOP=$(BOOTSTRAP_TOP) \
BOOTSTRAP_COMPILER=$(BOOTSTRAP_COMPILER) \
BOOTSTRAP=1 \
opt
primary_bootstrap_stdlib:
$(make_verbose)cd lib/stdlib/src && $(MAKE) \
BOOTSTRAP_COMPILER=$(BOOTSTRAP_COMPILER) \
primary_bootstrap_compiler
primary_bootstrap_mkdirs:
$(make_verbose)
$(V_at)test -d $(BOOTSTRAP_COMPILER)/egen \
|| mkdir -p $(BOOTSTRAP_COMPILER)/egen
$(V_at)test -d $(BOOTSTRAP_COMPILER)/ebin \
|| mkdir -p $(BOOTSTRAP_COMPILER)/ebin
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/kernel/egen \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/kernel/egen
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/kernel/ebin \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/kernel/ebin
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/kernel/include \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/kernel/include
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/stdlib/egen \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/stdlib/egen
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/stdlib/ebin \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/stdlib/ebin
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/stdlib/include \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/stdlib/include
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/compiler/egen \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/compiler/egen
$(V_at)test -d $(BOOTSTRAP_TOP)/lib/compiler/ebin \
|| mkdir -p $(BOOTSTRAP_TOP)/lib/compiler/ebin
primary_bootstrap_copy:
$(make_verbose)
$(V_at)cp -f lib/kernel/include/*.hrl $(BOOTSTRAP_TOP)/lib/kernel/include
$(V_at)cp -f lib/stdlib/include/*.hrl $(BOOTSTRAP_TOP)/lib/stdlib/include
# To remove modules left by the bootstrap building, but leave (restore)
# the modules in kernel which are needed for an emulator build
KERNEL_PRELOAD = erl_init otp_ring0 init erl_prim_loader prim_inet prim_file zlib prim_zip erlang erts_code_purger
KERNEL_PRELOAD_BEAMS=$(KERNEL_PRELOAD:%=$(BOOTSTRAP_TOP)/lib/kernel/ebin/%.beam)
start_scripts:
@cd erts/start_scripts \
&& ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" $(MAKE) script
# Creates "erl" and "erlc" scripts in bin/erl which uses the libraries in lib
local_setup:
@rm -f bin/erl bin/erlc bin/cerl
@cd erts && \
ERL_TOP=$(ERL_TOP) PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) local_setup
# ----------------------------------------------------------------------
# Build tests
# ---------------------------------------------------------------------
TEST_DIRS := \
lib/common_test/test_server \
$(wildcard lib/*/test) \
erts/test \
erts/epmd/test \
erts/emulator/test
# Any applications listed in SKIP-APPLICATIONS should be skipped
SKIP_FILE := $(wildcard lib/SKIP-APPLICATIONS)
SKIP_TEST_DIRS := $(if $(SKIP_FILE),$(foreach APP,$(shell cat $(SKIP_FILE)),lib/$(APP)/test))
TEST_DIRS := $(filter-out $(SKIP_TEST_DIRS),$(TEST_DIRS))
.PHONY: tests release_tests $(TEST_DIRS)
tests release_tests: $(TEST_DIRS)
$(TEST_DIRS):
if test -f $@/Makefile; then \
(cd $@; $(MAKE) TESTROOT="$(TESTSUITE_ROOT)" \
PATH=$(TEST_PATH_PREFIX)$(BOOT_PREFIX)"$${PATH}" release_tests) || exit $$?; \
fi
#
# Install
#
# Order is important here, don't change it!
#
INST_DEP += install.dirs install.emulator install.libs install.Install install.otp_version install.bin
install: $(INST_DEP)
install-docs:
ERL_TOP=$(ERL_TOP) INSTALLROOT="$(ERLANG_LIBDIR)" PATH=$(BOOT_PREFIX)"$${PATH}" \
$(MAKE) RELEASE_ROOT="$(ERLANG_LIBDIR)" release_docs
install.emulator:
cd erts && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)"$${PATH}" \
$(MAKE) PROFILE=$(PROFILE) TESTROOT="$(ERLANG_LIBDIR)" release
install.libs:
ifeq ($(OTP_SMALL_BUILD),true)
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)"$${PATH}" \
$(MAKE) TESTROOT="$(ERLANG_LIBDIR)" release
else
cd lib && \
ERL_TOP=$(ERL_TOP) PATH=$(INST_PATH_PREFIX)"$${PATH}" \
$(MAKE) TESTROOT="$(ERLANG_LIBDIR)" BUILD_ALL=true release
endif
install.Install:
(cd "$(ERLANG_LIBDIR)" \
&& ./Install $(INSTALL_CROSS) -minimal "$(ERLANG_INST_LIBDIR)")
install.otp_version:
ifeq ($(ERLANG_LIBDIR),)
$(INSTALL_DATA) "$(ERL_TOP)/OTP_VERSION" "$(OTP_DEFAULT_RELEASE_PATH)/releases/@OTP_REL@"
else
$(INSTALL_DATA) "$(ERL_TOP)/OTP_VERSION" "$(ERLANG_LIBDIR)/releases/@OTP_REL@"
endif
#
# Install erlang base public files
#
install.bin:
@ DESTDIR="$(DESTDIR)" EXTRA_PREFIX="$(EXTRA_PREFIX)" \
LN_S="$(LN_S)" BINDIR_SYMLINKS="$(BINDIR_SYMLINKS)" \
$(ERL_TOP)/make/install_bin \
--bindir "$(bindir)" \
--erlang-bindir "$(erlang_bindir)" \
--exec-prefix "$(exec_prefix)" \
$(ERL_BASE_PUB_FILES)
#
# Directories needed before we can install
#
install.dirs:
test -d "$(BINDIR)" || ${MKSUBDIRS} "$(BINDIR)"
${MKSUBDIRS} "$(ERLANG_LIBDIR)"
${MKSUBDIRS} "$(ERLANG_LIBDIR)/usr/lib"
.PHONY: strict_install
strict_install: $(IBIN_DIR) $(IBIN_FILES)
$(IBIN_FILES): $(ERL_TOP)/make/unexpected_use
rm -f $@
(cd $(dir $@) && $(LN_S) $(ERL_TOP)/make/unexpected_use $(notdir $@))
$(IBIN_DIR):
$(MKSUBDIRS) $@
# ----------------------------------------------------------------------
.PHONY: clean eclean bootstrap_root_clean bootstrap_clean
#
# Clean targets
#
clean: check_recreate_primary_bootstrap
rm -f *~ *.bak config.log config.status prebuilt.files ibin/*
cd erts && ERL_TOP=$(ERL_TOP) $(MAKE) clean
cd lib && ERL_TOP=$(ERL_TOP) $(MAKE) clean BUILD_ALL=true
distclean: clean
find . -type f -name SKIP -print | xargs $(RM)
find . -type f -name SKIP-APPLICATIONS -print | xargs $(RM)
#
# Just wipe out emulator, not libraries
#
eclean:
cd erts && ERL_TOP=$(ERL_TOP) $(MAKE) clean
#
# Clean up bootstrap
#
bootstrap_root_clean:
$(make_verbose)
$(V_at)rm -f $(BOOTSTRAP_ROOT)/bootstrap/lib/*/ebin/*.beam
$(V_at)rm -f $(BOOTSTRAP_ROOT)/bootstrap/lib/*/include/*.hrl
$(V_at)rm -f $(BOOTSTRAP_ROOT)/bootstrap/bin/*.*
# $(ERL_TOP)/bootstrap *should* equal $(BOOTSTRAP_TOP)
#
# We use $(ERL_TOP)/bootstrap instead of $(BOOTSTRAP_TOP) here as an
# extra safety precaution (we would really make a mess if
# $(BOOTSTRAP_TOP) for some reason should be empty).
bootstrap_clean:
$(make_verbose)
$(V_at)rm -f $(ERL_TOP)/bootstrap/lib/*/ebin/*.beam
$(V_at)rm -f $(ERL_TOP)/bootstrap/lib/*/ebin/*.app
$(V_at)rm -f $(ERL_TOP)/bootstrap/lib/*/egen/*
$(V_at)rm -f $(ERL_TOP)/bootstrap/lib/*/include/*.hrl
$(V_at)rm -f $(ERL_TOP)/bootstrap/primary_compiler/ebin/*
$(V_at)rm -f $(ERL_TOP)/bootstrap/primary_compiler/egen/*
$(V_at)rm -f $(ERL_TOP)/bootstrap/bin/*.*
$(V_at)rm -f $(KERNEL_PRELOAD:%=$(ERL_TOP)/lib/kernel/ebin/%.beam)
$(V_at)test $(BOOTSTRAP_ROOT) = $(ERL_TOP) \
|| $(MAKE) BOOTSTRAP_ROOT=$(BOOTSTRAP_ROOT) bootstrap_root_clean
# ----------------------------------------------------------------------