<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
<year>2018</year><year>2019</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
</legalnotice>
<title>socket</title>
<prepared></prepared>
<docno></docno>
<date></date>
<rev></rev>
<file>socket.xml</file>
</header>
<module since="OTP 22.0">socket</module>
<modulesummary>Socket interface.</modulesummary>
<description>
<p>This module provides an API for the socket interface.
It is used to create, delete and manipulate sockets,
send and receive data.</p>
<p>The idea is that it shall be as "close as possible" to the OS
level socket interface. The only significant addition is that some of
the functions,
e.g. <seealso marker="#recv/3"><c>recv/3</c></seealso>,
has a timeout argument. </p>
<note>
<p>There is currently <em>no</em> support for Windows. </p>
<p>Support for IPv6 has been implemented but <em>not</em> tested. </p>
<p>SCTP has only been partly implemented (and not tested). </p>
</note>
</description>
<datatypes>
<datatype>
<name name="domain"/>
</datatype>
<datatype>
<name name="type"/>
</datatype>
<datatype>
<name name="protocol"/>
</datatype>
<datatype>
<name>socket()</name>
<desc><p>As returned by
<seealso marker="#open/2"><c>open/2,3,4</c></seealso> and
<seealso marker="#accept/1"><c>accept/1,2</c></seealso>.</p>
</desc>
</datatype>
<datatype>
<name name="ip4_address"/>
</datatype>
<datatype>
<name name="ip6_address"/>
</datatype>
<datatype>
<name name="ip_address"/>
</datatype>
<datatype>
<name name="sockaddr"/>
</datatype>
<datatype>
<name name="sockaddr_in4"/>
</datatype>
<datatype>
<name name="sockaddr_in6"/>
</datatype>
<datatype>
<name name="sockaddr_un"/>
</datatype>
<datatype>
<name name="port_number"/>
</datatype>
<datatype>
<name name="in6_flow_info"/>
</datatype>
<datatype>
<name name="in6_scope_id"/>
</datatype>
<datatype>
<name name="accept_flags"/>
</datatype>
<datatype>
<name name="accept_flag"/>
</datatype>
<datatype>
<name name="send_flags"/>
</datatype>
<datatype>
<name name="send_flag"/>
</datatype>
<datatype>
<name name="recv_flags"/>
</datatype>
<datatype>
<name name="recv_flag"/>
</datatype>
<datatype>
<name name="shutdown_how"/>
</datatype>
<datatype>
<name name="sockopt_level"/>
</datatype>
<datatype>
<name name="otp_socket_option"/>
</datatype>
<datatype>
<name name="socket_option"/>
</datatype>
<datatype>
<name name="ip_socket_option"/>
</datatype>
<datatype>
<name name="ipv6_socket_option"/>
</datatype>
<datatype>
<name name="tcp_socket_option"/>
</datatype>
<datatype>
<name name="udp_socket_option"/>
</datatype>
<datatype>
<name name="sctp_socket_option"/>
</datatype>
<datatype>
<name name="timeval"/>
</datatype>
<datatype>
<name name="ip_tos"/>
</datatype>
<datatype>
<name name="ip_mreq"/>
</datatype>
<datatype>
<name name="ip_mreq_source"/>
</datatype>
<datatype>
<name name="ip_pmtudisc"/>
</datatype>
<datatype>
<name name="ip_msfilter_mode"/>
</datatype>
<datatype>
<name name="ip_msfilter"/>
</datatype>
<datatype>
<name name="ip_pktinfo"/>
</datatype>
<datatype>
<name name="ipv6_mreq"/>
</datatype>
<datatype>
<name name="ipv6_pmtudisc"/>
</datatype>
<datatype>
<name name="ipv6_pktinfo"/>
</datatype>
<datatype>
<name name="sctp_assoc_id"/>
</datatype>
<datatype>
<name name="sctp_sndrcvinfo"/>
</datatype>
<datatype>
<name name="sctp_event_subscribe"/>
</datatype>
<datatype>
<name name="sctp_assocparams"/>
</datatype>
<datatype>
<name name="sctp_initmsg"/>
</datatype>
<datatype>
<name name="sctp_rtoinfo"/>
</datatype>
<datatype>
<name name="msghdr_flag"/>
</datatype>
<datatype>
<name name="msghdr_flags"/>
</datatype>
<datatype>
<name name="msghdr"/>
</datatype>
<datatype>
<name name="cmsghdr_level"/>
</datatype>
<datatype>
<name name="cmsghdr_type"/>
</datatype>
<!--
<datatype>
<name name="cmsghdr_data"/>
</datatype>
-->
<datatype>
<name name="cmsghdr_recv"/>
</datatype>
<datatype>
<name name="cmsghdr_send"/>
</datatype>
<datatype>
<name name="uint8"/>
</datatype>
<datatype>
<name name="uint16"/>
</datatype>
<datatype>
<name name="uint20"/>
</datatype>
<datatype>
<name name="uint32"/>
</datatype>
<datatype>
<name name="int32"/>
</datatype>
<datatype>
<name name="supports_options_socket"/>
</datatype>
<datatype>
<name name="supports_options_ip"/>
</datatype>
<datatype>
<name name="supports_options_ipv6"/>
</datatype>
<datatype>
<name name="supports_options_tcp"/>
</datatype>
<datatype>
<name name="supports_options_udp"/>
</datatype>
<datatype>
<name name="supports_options_sctp"/>
</datatype>
<datatype>
<name name="supports_options"/>
</datatype>
</datatypes>
<funcs>
<func>
<name name="accept" arity="1" since="OTP 22.0"/>
<name name="accept" arity="2" since="OTP 22.0"/>
<fsummary>Accept a connection on a socket.</fsummary>
<desc>
<p>Accept a connection on a socket.</p>
<p>This call is used with connection-based socket types
(<c>stream</c> or <c>seqpacket</c>). It extracs the first pending
connection request for the listen socket and returns the (newly)
connected socket.</p>
</desc>
</func>
<func>
<name name="bind" arity="2" since="OTP 22.0"/>
<fsummary>Bind a name to a socket.</fsummary>
<desc>
<p>Bind a name to a socket.</p>
<p>When a socket is created
(with <seealso marker="#open/2"><c>open</c></seealso>),
it has no address assigned to it. <c>bind</c> assigns the
address specified by the <c>Addr</c> argument.</p>
<p>The rules used for name binding vary between domains.</p>
</desc>
</func>
<func>
<name name="close" arity="1" since="OTP 22.0"/>
<fsummary>Close a socket.</fsummary>
<desc>
<p>Closes the socket.</p>
<note>
<p>Note that for e.g. <c>protocol</c> = <c>tcp</c>, most implementations
doing a close does not guarantee that any data sent is delivered to
the recipient before the close is detected at the remote side. </p>
<p>One way to handle this is to use the
<seealso marker="#shutdown/2"><c>shutdown</c></seealso>
function
(<c>socket:shutdown(Socket, write)</c>) to signal that no more data is
to be sent and then wait for the read side of the socket to be closed.</p>
</note>
</desc>
</func>
<func>
<name name="connect" arity="2" since="OTP 22.0"/>
<name name="connect" arity="3" since="OTP 22.0"/>
<fsummary>Initiate a connection on a socket.</fsummary>
<desc>
<p>This function connects the socket to the address
specied by the <c>SockAddr</c> argument.</p>
</desc>
</func>
<func>
<name name="getopt" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="getopt" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="getopt" arity="3" clause_i="3" since="OTP 22.0"/>
<name name="getopt" arity="3" clause_i="4" since="OTP 22.0"/>
<name name="getopt" arity="3" clause_i="5" since="OTP 22.0"/>
<name name="getopt" arity="3" clause_i="6" since="OTP 22.0"/>
<name name="getopt" arity="3" clause_i="7" since="OTP 22.0"/>
<fsummary>Get an option on a socket.</fsummary>
<desc>
<p>Get an option on a socket.</p>
<p>What properties are valid depend both on <c>Level</c> and
on what kind of socket it is (<c>domain</c>, <c>type</c> and
<c>protocol</c>).</p>
<p>See the
<seealso marker="socket_usage#socket_options">socket options</seealso>
chapter of the users guide for more info. </p>
<note><p>Not all options are valid on all platforms. That is,
even if "we" support an option, that does not mean that the
underlying OS does.</p></note>
</desc>
</func>
<func>
<name name="getopt" arity="3" clause_i="8" since="OTP 22.0"/>
<fsummary>Get an option on a socket.</fsummary>
<desc>
<p>Get an option on a socket.</p>
<p>What properties are valid depend both on <c>Level</c> and
on what kind of socket it is (<c>domain</c>, <c>type</c> and
<c>protocol</c>).</p>
<p>When specifying <c>Level</c> as an integer, and therefor
using "native mode", it is *currently* up to the caller to
know how to interpret the result.</p>
<p>See the
<seealso marker="socket_usage#socket_options">socket options</seealso>
chapter of the users guide for more info. </p>
<note><p>Not all options are valid on all platforms. That is,
even if "we" support an option, that does not mean that the
underlying OS does.</p></note>
</desc>
</func>
<func>
<name name="listen" arity="1" since="OTP 22.0"/>
<name name="listen" arity="2" since="OTP 22.0"/>
<fsummary>Listen for connections on a socket.</fsummary>
<desc>
<p>Listen for connections on a socket.</p>
</desc>
</func>
<func>
<name name="open" arity="2" since="OTP 22.0"/>
<name name="open" arity="3" since="OTP 22.0"/>
<name name="open" arity="4" since="OTP 22.0"/>
<fsummary>Create an endpoint for communication.</fsummary>
<desc>
<p>Creates an endpoint (socket) for communication.</p>
<p>For some <c>types</c> there is a default protocol,
indicated by <c>default</c>, which it <em>may</em> be
possible to specify.
And for <c>Domain = local</c>, if a protocol <em>is</em> pecified,
it <em>must</em> be <c>default</c>. </p>
<p>The <c>Extra</c> argument is intended for "obscure" options.
Currently the only supported option is <c>netns</c>, which
is only supported on the linux platform.</p>
<note>
<p>It may not be possible to specify the default protocol (except
when <c>Domain = local</c>). We need to be able to retreive
the resulting protocol, which is <em>not</em> possble on all
platforms. </p>
</note>
</desc>
</func>
<func>
<name name="peername" arity="1" since="OTP 22.0"/>
<fsummary>Get name of connected socket peer.</fsummary>
<desc>
<p>Returns the address of the peer connected to the socket.</p>
</desc>
</func>
<func>
<name name="recv" arity="1" since="OTP 22.0"/>
<name name="recv" arity="2" since="OTP 22.0"/>
<name name="recv" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="recv" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="recv" arity="4" since="OTP 22.0"/>
<fsummary>Receive a message from a socket.</fsummary>
<desc>
<p>Receive a message from a socket.</p>
<p>There is a special case for the argument <c>Length</c>.
If it is set to zero (0), it means "give me everything you
currently have".</p>
</desc>
</func>
<func>
<name name="recvfrom" arity="1" since="OTP 22.0"/>
<name name="recvfrom" arity="2" since="OTP 22.0"/>
<name name="recvfrom" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="recvfrom" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="recvfrom" arity="3" clause_i="3" since="OTP 22.0"/>
<name name="recvfrom" arity="4" since="OTP 22.0"/>
<fsummary>Receive a message from a socket.</fsummary>
<desc>
<p>Receive a message from a socket.</p>
<p>This function reads "messages", which means that regardless of
how much we want to read, it returns when we get a message.</p>
<p>The <c>BufSz</c> argument basically defines the size of the
receive buffer. By setting the value to zero (0), the configured
size (setopt with <c>Level</c> = <c>otp</c> and <c>Key</c> = <c>rcvbuf</c>)
is used.</p>
<p>It may be impossible to know what (buffer) size is appropriate
"in advance", and in those cases it may be convenient to use the
(recv) 'peek' flag. When this flag is provided, the message is *not*
"consumed" from the underlying buffers, so another recvfrom call
is needed, possibly with a then adjusted buffer size.</p>
</desc>
</func>
<func>
<name name="recvmsg" arity="1" since="OTP 22.0"/>
<name name="recvmsg" arity="2" clause_i="1" since="OTP 22.0"/>
<name name="recvmsg" arity="2" clause_i="2" since="OTP 22.0"/>
<name name="recvmsg" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="recvmsg" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="recvmsg" arity="5" since="OTP 22.0"/>
<fsummary>Receive a message from a socket.</fsummary>
<desc>
<p>Receive a message from a socket.</p>
<p>This function reads "messages", which means that regardless of
how much we want to read, it returns when we get a message.</p>
<p>The message will be delivered in the form of a <c>msghdr()</c>,
which may contain the source address (if socket not connected),
a list of <c>cmsghdr_recv()</c> (depends on what socket options have
been set and what the protocol and platform supports) and
also a set of flags, providing further info about the read. </p>
<p>The <c>BufSz</c> argument basically defines the size of the
receive buffer. By setting the value to zero (0), the configured
size (setopt with <c>Level</c> = <c>otp</c> and <c>Key</c> = <c>rcvbuf</c>)
is used.</p>
<p>The <c>CtrlSz</c> argument basically defines the size of the
receive buffer for the control messages.
By setting the value to zero (0), the configured size (setopt
with <c>Level</c> = <c>otp</c>) is used.</p>
<p>It may be impossible to know what (buffer) size is appropriate
"in advance", and in those cases it may be convenient to use the
(recv) 'peek' flag. When this flag is provided, the message is *not*
"consumed" from the underlying buffers, so another recvmsg call
is needed, possibly with a then adjusted buffer size.</p>
</desc>
</func>
<func>
<name name="send" arity="2" since="OTP 22.0"/>
<name name="send" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="send" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="send" arity="4" since="OTP 22.0"/>
<fsummary>Send a message on a socket.</fsummary>
<desc>
<p>Send a message on a connected socket.</p>
</desc>
</func>
<func>
<name name="sendmsg" arity="2" since="OTP 22.0"/>
<name name="sendmsg" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="sendmsg" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="sendmsg" arity="4" since="OTP 22.0"/>
<fsummary>Send a message on a socket.</fsummary>
<desc>
<p>Send a message on a socket. The destination, if needed
(socket <em>not</em> connected) is provided in the <c>MsgHdr</c>,
which also contains the message to send,
The <c>MsgHdr</c> may also contain an list of optional <c>cmsghdr_send()</c>
(depends on what the protocol and platform supports).</p>
<p>Unlike the <seealso marker="#send/2"><c>send</c></seealso> function,
this one sends <em>one message</em>.
This means that if, for whatever reason, its not possible to send the
message in one go, the function will instead return with the
<em>remaining</em> data (<c>{ok, Remaining}</c>). Thereby leaving it
up to the caller to decide what to do (retry with the remaining data
of give up). </p>
</desc>
</func>
<func>
<name name="sendto" arity="3" since="OTP 22.0"/>
<name name="sendto" arity="4" clause_i="1" since="OTP 22.0"/>
<name name="sendto" arity="4" clause_i="2" since="OTP 22.0"/>
<name name="sendto" arity="5" since="OTP 22.0"/>
<fsummary>Send a message on a socket.</fsummary>
<desc>
<p>Send a message on a socket, to the specified destination.</p>
</desc>
</func>
<func>
<name name="setopt" arity="4" clause_i="1" since="OTP 22.0"/>
<name name="setopt" arity="4" clause_i="2" since="OTP 22.0"/>
<name name="setopt" arity="4" clause_i="3" since="OTP 22.0"/>
<name name="setopt" arity="4" clause_i="4" since="OTP 22.0"/>
<name name="setopt" arity="4" clause_i="5" since="OTP 22.0"/>
<name name="setopt" arity="4" clause_i="6" since="OTP 22.0"/>
<name name="setopt" arity="4" clause_i="7" since="OTP 22.0"/>
<fsummary>Set options on a socket.</fsummary>
<desc>
<p>Set options on a socket.</p>
<p>What properties are valid depend both on <c>Level</c> and on
what kind of socket it is (<c>domain</c>, <c>type</c> and
<c>protocol</c>).</p>
<p>See the
<seealso marker="socket_usage#socket_options">socket options</seealso>
chapter of the users guide for more info. </p>
<note><p>Not all options are valid on all platforms. That is,
even if "we" support an option, that does not mean that the
underlying OS does.</p></note>
<note><p>Sockets are set 'non-blocking' when created, so this option
is *not* available (as it would adversely effect the Erlang VM
to set a socket 'blocking').</p></note>
</desc>
</func>
<func>
<name name="setopt" arity="4" clause_i="8" since="OTP 22.0"/>
<fsummary>Set options on a socket.</fsummary>
<desc>
<p>Set options on a socket.</p>
<p>What properties are valid depend both on <c>Level</c> and on
what kind of socket it is (<c>domain</c>, <c>type</c> and
<c>protocol</c>).</p>
<p>See the
<seealso marker="socket_usage#socket_options">socket options</seealso>
chapter of the users guide for more info. </p>
<note><p>Not all options are valid on all platforms. That is,
even if "we" support an option, that does not mean that the
underlying OS does.</p></note>
<note><p>Sockets are set 'non-blocking' when created, so this option
is *not* available (as it would adversely effect the Erlang VM
to set a socket 'blocking').</p></note>
</desc>
</func>
<func>
<name name="shutdown" arity="2" since="OTP 22.0"/>
<fsummary>Shut down part of a full-duplex connection.</fsummary>
<desc>
<p>Shut down all or part of a full-duplex connection.</p>
</desc>
</func>
<func>
<name name="sockname" arity="1" since="OTP 22.0"/>
<fsummary>Get socket name.</fsummary>
<desc>
<p>Returns the current address to which the socket is bound.</p>
</desc>
</func>
<func>
<name name="supports" arity="0" since="OTP 22.0"/>
<name name="supports" arity="1" clause_i="1" since="OTP 22.0"/>
<name name="supports" arity="1" clause_i="2" since="OTP 22.0"/>
<name name="supports" arity="1" clause_i="3" since="OTP 22.0"/>
<name name="supports" arity="1" clause_i="4" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="1" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="2" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="3" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="4" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="5" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="6" since="OTP 22.0"/>
<name name="supports" arity="2" clause_i="7" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="1" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="2" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="3" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="4" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="5" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="6" since="OTP 22.0"/>
<name name="supports" arity="3" clause_i="7" since="OTP 22.0"/>
<fsummary>Report info about what the platform supports.</fsummary>
<desc>
<p>This function intends to retreive information about what the
platform supports. Such as if SCTP is supported. Or which socket
options are supported. </p>
</desc>
</func>
</funcs>
<section>
<title>Examples</title>
<marker id="examples"></marker>
<code type="none">
client(Addr, SAddr, SPort) ->
{ok, Sock} = socket:open(inet, stream, tcp),
{ok, _} = socket:bind(Sock, #{family => inet,
addr => Addr}),
ok = socket:connect(Sock, #{family => inet,
addr => SAddr,
port => SPort}),
Msg = list_to_binary("hello"),
ok = socket:send(Sock, Msg),
ok = socket:shutdown(Sock, write),
{ok, Msg} = socket:recv(Sock),
ok = socket:close(Sock).
server(Addr, Port) ->
{ok, LSock} = socket:open(inet, stream, tcp),
{ok, _} = socket:bind(LSock, #{family => inet,
port => Port,
addr => Addr}),
ok = socket:listen(LSock),
{ok, Sock} = socket:accept(LSock),
{ok, Msg} = socket:recv(Sock),
ok = socket:send(Sock, Msg),
ok = socket:shutdown(Sock, write),
ok = socket:close(Sock),
ok = socket:close(LSock).
</code>
</section>
</erlref>
