/*
* %CopyrightBegin%
*
* Copyright Ericsson AB 2004-2012. All Rights Reserved.
*
* The contents of this file are subject to the Erlang Public License,
* Version 1.1, (the "License"); you may not use this file except in
* compliance with the License. You should have received a copy of the
* Erlang Public License along with this software. If not, it can be
* retrieved online at http://www.erlang.org/.
*
* Software distributed under the License is distributed on an "AS IS"
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
* the License for the specific language governing rights and limitations
* under the License.
*
* %CopyrightEnd%
*/
/*
*
* List all non architecture-specific BIFs and primops, and
* classify each as belonging to one of the classes below.
* This list is included in hipe_${ARCH}_bifs.m4, which is
* responsible for translating these classifications to the
* best possible native code wrappers.
*
* XXX: We should have a more detailed BIF classification
* with a number of orthogonal properties (e.g., UPDATES_HP,
* NEEDS_NSP, CAN_FAIL, CAN_GC, etc), from which we should
* generate appropriate interfaces.
*
* The classification is expressed in terms of the resources
* and BIF failure modes described below.
*
* Resources:
* - NSP: native stack pointer
* NSP is read by GC BIFs and primops, and hipe_handle_exception().
* NSP is updated at compiler-inserted calls to hipe_inc_nstack().
* No other BIF or primop may access NSP.
* - NSP_LIMIT: native stack limit
* NSP_LIMIT is only updated at compiler-inserted calls to inc_stack.
* Everywhere else, the cached value equals the value stored in P.
* - NRA: native return address
* NRA is read by GC BIFs and primops, and hipe_handle_exception().
* No BIF or primop may update NRA.
* - HP: heap pointer
* All BIFs can read and update HP.
* Primops with access to P that do not access HP are called "nocons".
* - HP_LIMIT: heap limit
* HP_LIMIT is only updated by GC BIFs and primops.
* Everywhere else, the cached value equals the value stored in P.
* - FCALLS: reduction counter
* All BIFs can read and update FCALLS (because BEAM abuses FCALLS
* to trigger GCs). XXX: can we avoid that overhead?
* All nocons primops do not access FCALLS.
* All other primops with access to P can read and update FCALLS.
* - P: pointer to the state record for the process
*
* BIF failure modes:
* - none: may not signal any exception
* The BIF wrapper needs no checks before returning.
* - standard: may signal any exception
* The BIF wrapper must check for an exception before returning.
* Zero-arity BIFs signal no exceptions, except in a small number
* of cases explicitly enumerated here.
*/
/****************************************************************
* BIF CLASS DESCRIPTIONS *
****************************************************************/
/*
* standard_bif_interface_0(nbif_name, cbif_name)
* standard_bif_interface_1(nbif_name, cbif_name)
* standard_bif_interface_2(nbif_name, cbif_name)
* standard_bif_interface_3(nbif_name, cbif_name)
*
* A BIF with implicit P parameter, 0-3 ordinary parameters,
* which may fail.
* HP and FCALLS may be read and updated.
* HP_LIMIT, NSP, NSP_LIMIT, and NRA may not be accessed.
*/
/*
* nofail_primop_interface_0(nbif_name, cbif_name)
* nofail_primop_interface_1(nbif_name, cbif_name)
* nofail_primop_interface_2(nbif_name, cbif_name)
* nofail_primop_interface_3(nbif_name, cbif_name)
*
* A primop or guard BIF with no failure mode, otherwise
* identical to standard_bif_interface_N.
*/
/*
* gc_bif_interface_0(nbif_name, cbif_name)
* gc_bif_interface_1(nbif_name, cbif_name)
* gc_bif_interface_2(nbif_name, cbif_name)
*
* A BIF which may do a GC or walk the native stack.
* May read NSP, NSP_LIMIT, NRA, HP, HP_LIMIT, and FCALLS.
* May update HP, HP_LIMIT, and FCALLS.
* May not update NSP, NSP_LIMIT, or NRA.
* Otherwise identical to standard_bif_interface_N.
*/
/*
* gc_nofail_primop_interface_1(nbif_name, cbif_name)
*
* A primop with implicit P parameter, 1 ordinary parameter,
* and no failure mode.
* May read NSP, NSP_LIMIT, NRA, HP, HP_LIMIT, and FCALLS.
* May update HP, HP_LIMIT, and FCALLS.
* May not update NSP, NSP_LIMIT, or NRA.
*/
/*
* nocons_nofail_primop_interface_0(nbif_name, cbif_name)
* nocons_nofail_primop_interface_1(nbif_name, cbif_name)
* nocons_nofail_primop_interface_2(nbif_name, cbif_name)
* nocons_nofail_primop_interface_3(nbif_name, cbif_name)
* nocons_nofail_primop_interface_5(nbif_name, cbif_name)
*
* A primop with implicit P parameter, 0-3 or 5 ordinary parameters,
* and no failure mode.
* HP, HP_LIMIT, FCALLS, NSP, NSP_LIMIT, and NRA may not be accessed.
*/
/*
* noproc_primop_interface_0(nbif_name, cbif_name)
* noproc_primop_interface_1(nbif_name, cbif_name)
* noproc_primop_interface_2(nbif_name, cbif_name)
* noproc_primop_interface_3(nbif_name, cbif_name)
* noproc_primop_interface_5(nbif_name, cbif_name)
*
* A primop with no P parameter, 0-3 or 5 ordinary parameters,
* and no failure mode.
* HP, HP_LIMIT, FCALLS, NSP, NSP_LIMIT, and NRA may not be accessed.
*/
/****************************************************************
* BIF CLASSIFICATION *
****************************************************************/
/*
* Zero-arity BIFs that can fail.
*/
standard_bif_interface_0(nbif_processes_0, processes_0)
standard_bif_interface_0(nbif_ports_0, ports_0)
/*
* BIFs and primops that may do a GC (change heap limit and walk the native stack).
* XXX: erase/1 and put/2 cannot fail
*/
gc_bif_interface_2(nbif_check_process_code_2, hipe_check_process_code_2)
gc_bif_interface_1(nbif_erase_1, erase_1)
gc_bif_interface_0(nbif_garbage_collect_0, garbage_collect_0)
gc_bif_interface_1(nbif_garbage_collect_1, hipe_garbage_collect_1)
gc_nofail_primop_interface_1(nbif_gc_1, hipe_gc)
gc_bif_interface_2(nbif_put_2, put_2)
/*
* Debug BIFs that need read access to the full state.
* hipe_bifs:nstack_used_size/0 only needs read access to NSP.
* They are classified as GC BIFs for simplicity.
*/
gc_bif_interface_1(nbif_hipe_bifs_show_nstack_1, hipe_show_nstack_1)
gc_bif_interface_1(nbif_hipe_bifs_show_pcb_1, hipe_bifs_show_pcb_1)
gc_bif_interface_0(nbif_hipe_bifs_nstack_used_size_0, hipe_bifs_nstack_used_size_0)
gc_bif_interface_2(nbif_hipe_bifs_debug_native_called, hipe_bifs_debug_native_called_2)
/*
* Arithmetic operators called indirectly by the HiPE compiler.
*/
standard_bif_interface_2(nbif_add_2, splus_2)
standard_bif_interface_2(nbif_sub_2, sminus_2)
standard_bif_interface_2(nbif_mul_2, stimes_2)
standard_bif_interface_2(nbif_div_2, div_2)
standard_bif_interface_2(nbif_intdiv_2, intdiv_2)
standard_bif_interface_2(nbif_rem_2, rem_2)
standard_bif_interface_2(nbif_bsl_2, bsl_2)
standard_bif_interface_2(nbif_bsr_2, bsr_2)
standard_bif_interface_2(nbif_band_2, band_2)
standard_bif_interface_2(nbif_bor_2, bor_2)
standard_bif_interface_2(nbif_bxor_2, bxor_2)
standard_bif_interface_1(nbif_bnot_1, bnot_1)
/*
* Miscellaneous primops.
*/
standard_bif_interface_1(nbif_set_timeout, hipe_set_timeout)
standard_bif_interface_1(nbif_conv_big_to_float, hipe_conv_big_to_float)
standard_bif_interface_2(nbif_rethrow, hipe_rethrow)
standard_bif_interface_3(nbif_find_na_or_make_stub, hipe_find_na_or_make_stub)
standard_bif_interface_2(nbif_nonclosure_address, hipe_nonclosure_address)
nocons_nofail_primop_interface_0(nbif_fclearerror_error, hipe_fclearerror_error)
/*
* Mbox primops with implicit P parameter.
*/
nocons_nofail_primop_interface_0(nbif_select_msg, hipe_select_msg)
/*
* Primops without any P parameter.
* These cannot CONS or gc.
*/
noproc_primop_interface_2(nbif_cmp_2, cmp)
noproc_primop_interface_2(nbif_eq_2, eq)
/*
* Bit-syntax primops with implicit P parameter.
* XXX: all of the _2 versions cons on the ordinary heap
* XXX: all of them can cons and thus update FCALLS
*/
nofail_primop_interface_3(nbif_bs_get_integer_2, erts_bs_get_integer_2)
nofail_primop_interface_3(nbif_bs_get_binary_2, erts_bs_get_binary_2)
nofail_primop_interface_3(nbif_bs_get_float_2, erts_bs_get_float_2)
standard_bif_interface_3(nbif_bs_put_utf8, hipe_bs_put_utf8)
standard_bif_interface_3(nbif_bs_put_utf16be, hipe_bs_put_utf16be)
standard_bif_interface_3(nbif_bs_put_utf16le, hipe_bs_put_utf16le)
standard_bif_interface_1(nbif_bs_validate_unicode, hipe_bs_validate_unicode)
/*
* Bit-syntax primops without any P parameter.
* These cannot CONS or gc.
*/
noproc_primop_interface_1(nbif_bs_allocate, hipe_bs_allocate)
noproc_primop_interface_2(nbif_bs_reallocate, hipe_bs_reallocate)
noproc_primop_interface_1(nbif_bs_utf8_size, hipe_bs_utf8_size)
noproc_primop_interface_1(nbif_bs_get_utf8, erts_bs_get_utf8)
noproc_primop_interface_1(nbif_bs_utf16_size, hipe_bs_utf16_size)
noproc_primop_interface_2(nbif_bs_get_utf16, erts_bs_get_utf16)
noproc_primop_interface_2(nbif_bs_validate_unicode_retract, hipe_bs_validate_unicode_retract)
/*
* Bit-syntax primops. The ERTS_SMP runtime system requires P,
* hence the use of nocons_nofail_primop_interface_N().
* When ERTS_SMP is disabled, noproc_primop_interface_N()
* should be used instead.
*/
nocons_nofail_primop_interface_5(nbif_bs_put_small_float, hipe_bs_put_small_float)
noproc_primop_interface_5(nbif_bs_put_bits, hipe_bs_put_bits)
ifelse(ERTS_SMP,1,`
nocons_nofail_primop_interface_5(nbif_bs_put_big_integer, hipe_bs_put_big_integer)
',`
noproc_primop_interface_5(nbif_bs_put_big_integer, hipe_bs_put_big_integer)
')dnl
gc_bif_interface_0(nbif_check_get_msg, hipe_check_get_msg)
#`ifdef' NO_FPE_SIGNALS
nocons_nofail_primop_interface_0(nbif_emulate_fpe, hipe_emulate_fpe)
#endif
/*
* SMP-specific stuff
*/
ifelse(ERTS_SMP,1,`
nocons_nofail_primop_interface_0(nbif_clear_timeout, hipe_clear_timeout)
noproc_primop_interface_1(nbif_atomic_inc, hipe_atomic_inc)
',)dnl
/*
* Standard BIFs.
* BIF_LIST(ModuleAtom,FunctionAtom,Arity,CFun,Index)
*/
define(BIF_LIST,`standard_bif_interface_$3(nbif_$4, $4)')
include(TARGET/`erl_bif_list.h')
/*
* Guard BIFs.
* GBIF_LIST(FunctionAtom,Arity,CFun)
*/
define(GBIF_LIST,`nofail_primop_interface_$2(gbif_$3, $3)')
include(`hipe/hipe_gbif_list.h')
