%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 1999-2017. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
-module(port_trace_SUITE).
-export([all/0, suite/0,init_per_suite/1, end_per_suite/1,
init_per_group/2,end_per_group/2,
init_per_testcase/2,end_per_testcase/2]).
-export([port_specs/1, ports/1, open_close/1,
command/1, control/1, connect/1, call/1,
output/1, output2/1, output_binary/1,
outputv/1, set_timer/1, failure_eof/1,
failure_atom/1, failure_posix/1,
failure/1, output_term/1,
driver_output_term/1,
send_term/1, driver_send_term/1,
driver_remote_send_term/1]).
-define(ECHO_DRV_NOOP, 0).
-define(ECHO_DRV_OUTPUT, 1).
-define(ECHO_DRV_OUTPUT2, 2).
-define(ECHO_DRV_OUTPUT_BINARY, 3).
-define(ECHO_DRV_OUTPUTV, 4).
-define(ECHO_DRV_SET_TIMER, 5).
-define(ECHO_DRV_FAILURE_EOF, 6).
-define(ECHO_DRV_FAILURE_ATOM, 7).
-define(ECHO_DRV_FAILURE_POSIX, 8).
-define(ECHO_DRV_FAILURE, 9).
-define(ECHO_DRV_OUTPUT_TERM, 10).
-define(ECHO_DRV_DRIVER_OUTPUT_TERM, 11).
-define(ECHO_DRV_SEND_TERM, 12).
-define(ECHO_DRV_DRIVER_SEND_TERM, 13).
-define(ECHO_DRV_SAVE_CALLER, 14).
-define(ECHO_DRV_REMOTE_SEND_TERM, 15).
suite() -> [{ct_hooks,[ts_install_cth]},
{timetrap, {minutes, 2}}].
all() ->
[port_specs, ports, open_close,
command, control, connect, call,
output, output2, output_binary,
outputv, set_timer, failure_eof,
failure_atom, failure_posix,
failure, output_term,
driver_output_term,
send_term, driver_send_term,
driver_remote_send_term].
init_per_suite(Config) ->
Config.
end_per_suite(_Config) ->
ok.
init_per_group(_GroupName, Config) ->
Config.
end_per_group(_GroupName, Config) ->
Config.
init_per_testcase(driver_remote_send_term, Config) ->
case erlang:system_info(smp_support) of
false ->
{skip,"Only supported on smp systems"};
true ->
init_per_testcase(driver_remote_send_term_smp, Config)
end;
init_per_testcase(Func, Config) when is_atom(Func), is_list(Config) ->
erlang:trace(all, false, [all]),
os:unsetenv("OUTPUTV"),
reload_drv(Config),
Config.
end_per_testcase(_Func, _Config) ->
erlang:trace(all, false, [all]),
ok.
%% Test the first argument of trace/3
port_specs(_Config) ->
S = self(),
Tracer = fun F() ->
receive
stop ->
ok;
M ->
S ! M,
F()
end
end,
Test = fun(TraceSpec, Info1, Info2) ->
{TracerPid,Ref} = spawn_monitor(Tracer),
Prt1 = erlang:open_port({spawn, echo_drv}, [binary]),
erlang:trace(TraceSpec, true, ['receive', {tracer, TracerPid}]),
%% We disable trace messages from the testcase process
erlang:trace(self(), false, ['receive']),
Prt2 = erlang:open_port({spawn, echo_drv}, [binary]),
InfoCheck =
fun(Info, Prt) ->
if
Info ->
{tracer, TracerPid} = erlang:trace_info(Prt, tracer),
{flags,['receive']} = erlang:trace_info(Prt, flags);
not Info ->
{tracer,[]} = erlang:trace_info(Prt, tracer),
{flags,[]} = erlang:trace_info(Prt, flags)
end
end,
InfoCheck(Info1, Prt1),
InfoCheck(Info2, Prt2),
%% These may create trace messages
erlang:port_command(Prt1, <<?ECHO_DRV_NOOP>>),
erlang:port_command(Prt2, <<?ECHO_DRV_NOOP>>),
%% Test what happens when the tracer dies
trace_delivered(),
TracerPid ! stop,
receive {'DOWN', Ref, process, TracerPid, normal} -> ok end,
%% These should not generate any trace messages
erlang:port_command(Prt1, <<?ECHO_DRV_NOOP>>),
erlang:port_command(Prt2, <<?ECHO_DRV_NOOP>>),
InfoCheck(false, Prt1),
InfoCheck(false, Prt2),
erlang:port_close(Prt1),
erlang:port_close(Prt2),
erlang:trace(all, false, [all]),
{Prt1, Prt2}
end,
{_Prt11, Prt12} = Test(new, false, true),
[{trace, Prt12, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt12),
{_Prt21, Prt22} = Test(new_ports, false, true),
[{trace, Prt22, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt22),
{Prt31, _Prt32} = Test(existing, true, false),
[{trace, Prt31, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt31),
{Prt41, _Prt42} = Test(existing_ports, true, false),
[{trace, Prt41, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt41),
{Prt51, Prt52} = Test(all, true, true),
[{trace, Prt51, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt51),
[{trace, Prt52, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt52),
{Prt61, Prt62} = Test(ports, true, true),
[{trace, Prt61, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt61),
[{trace, Prt62, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}]
= flush(Prt62),
ok.
%% Test that the 'ports' trace flag works
ports(_Config) ->
{Prt, S} = trace_and_open([ports],[binary]),
[{trace, Prt, open, S, echo_drv},
{trace, Prt, getting_linked, S}] = flush(),
register(?MODULE, Prt),
unregister(?MODULE),
register(?MODULE, Prt),
[{trace,Prt,register,port_trace_SUITE},
{trace,Prt,unregister,port_trace_SUITE},
{trace,Prt,register,port_trace_SUITE}] = flush(),
unlink(Prt),
link(Prt),
[{trace,Prt,getting_unlinked,S},
{trace,Prt,getting_linked,S}] = flush(),
erlang:port_close(Prt),
[{trace,Prt,closed,normal},
{trace,Prt,unregister,port_trace_SUITE},
{trace,Prt,unlink,S}] = flush(),
ok.
%% Test that port_close and ! close generate correct trace messages
open_close(_Config) ->
S = trace_ports([send,'receive']),
Prt = erlang:open_port({spawn, echo_drv}, [binary]),
erlang:port_close(Prt),
[{trace, Prt, 'receive', {S, close}}] = flush(),
Prt2 = erlang:open_port({spawn, echo_drv}, [binary]),
Prt2 ! {S, close},
recv({Prt2, closed}),
[{trace, Prt2, 'receive', {S, close}},
{trace, Prt2, send, closed, S}] = flush(),
catch erlang:port_close(Prt2),
[] = flush(),
ok.
%% Test that port_command and ! command generate correct trace messages
command(Config) ->
Flags = [send,'receive'],
S = trace_ports(Flags),
Prt = erlang:open_port({spawn, echo_drv}, [binary]),
erlang:port_command(Prt, <<?ECHO_DRV_NOOP:8>>),
[{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_NOOP:8>>}}}] = flush(),
erlang:port_command(Prt, [?ECHO_DRV_NOOP, <<0:8>>]),
[{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_NOOP:8,0:8>>}}}] = flush(),
Prt ! {S, {command, <<?ECHO_DRV_NOOP:8>>}},
[{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_NOOP:8>>}}}] = flush(),
OutputMsg = <<?ECHO_DRV_NOOP:8,0:(8*512)>>,
Prt ! {S, {command, OutputMsg}},
[{trace, Prt, 'receive', {S, {command, OutputMsg}}}] = flush(),
close(Prt, Flags),
os:putenv("OUTPUTV","true"),
reload_drv(Config),
Prt2 = erlang:open_port({spawn, echo_drv}, [binary]),
OutputvMsg = [<<0:8>>,<<0:(8*512)>>,<<0:(8*256)>>,<<0:8>>],
erlang:port_command(Prt2, OutputvMsg),
[{trace, Prt2, 'receive', {S, {command, OutputvMsg}}}] = flush(),
Prt2 ! {S, {command, OutputvMsg}},
[{trace, Prt2, 'receive', {S, {command, OutputvMsg}}}] = flush(),
close(Prt2, Flags),
os:unsetenv("OUTPUTV"),
ok.
%% Test that port_control generate correct trace messages
control(_Config) ->
Flags = [send,'receive'],
{Prt, S} = trace_and_open(Flags,[binary]),
[0] = erlang:port_control(Prt, 1, <<?ECHO_DRV_NOOP:8, 0:8>>),
[{trace, Prt, 'receive', {S, {control, {1, <<?ECHO_DRV_NOOP:8, 0:8>>}}}},
{trace, Prt, send, {Prt, {control, <<0:8>>}}, S}] = flush(),
[0] = erlang:port_control(Prt, (1 bsl 32) - 1, <<?ECHO_DRV_NOOP:8, 0:8>>),
[{trace, Prt, 'receive', {S, {control, {(1 bsl 32) - 1, <<?ECHO_DRV_NOOP:8, 0:8>>}}}},
{trace, Prt, send, {Prt, {control, <<0:8>>}}, S}] = flush(),
Msg = <<?ECHO_DRV_NOOP:8, 0:(8*512)>>,
Pat = lists:duplicate(512, 0),
Pat = erlang:port_control(Prt, 1, Msg),
[{trace, Prt, 'receive', {S, {control, {1, Msg}}}},
{trace, Prt, send, {Prt, {control, <<0:(8*512)>>}}, S}] = flush(),
close(Prt, Flags),
ok.
%% Test that port_connect and ! connect generate correct trace messages
%% This includes that the proper getting_linked messages are sent
connect(_Config) ->
{Prt, S} = trace_and_open([send, 'receive', ports],[binary]),
flush(),
{Pid,Ref} = spawn_monitor(
fun() ->
receive
go ->
Prt ! {self(), {connect, S}},
receive {Prt, connected} -> unlink(Prt) end
end
end),
erlang:trace(Pid, true, [send, 'receive', procs]),
erlang:port_connect(Prt, Pid),
unlink(Prt),
[{trace,Prt,getting_linked,Pid},
{trace,Prt,'receive',{S,{connect,Pid}}},
{trace,Prt,send,{Prt,connected},S},
{trace,Prt,getting_unlinked, S}] = flush(Prt),
[{trace,Pid,getting_linked,Prt}] = flush(),
Pid ! go,
recv({'DOWN',Ref,process,Pid,normal}),
[{trace,Prt,'receive',{Pid,{connect,S}}},
{trace,Prt,send,{Prt,connected},Pid},
{trace,Prt,getting_unlinked,Pid}] = flush(Prt),
[{trace,Pid,'receive',go},
{trace,Pid,send,{Pid,{connect,S}}, Prt},
{trace,Pid,'receive',{Prt,connected}},
{trace,Pid,unlink,Prt},
{trace,Pid,exit,normal}] = flush(),
erlang:port_close(Prt),
[{trace, Prt, 'receive', {S, close}},
{trace, Prt, closed, normal}] = flush(),
ok.
%% Test that port_call generate correct trace messages
call(_Config) ->
Flags = [send,'receive'],
{Prt, S} = trace_and_open(Flags,[binary]),
Test = fun(Msg) ->
BinMsg = term_to_binary(Msg),
Msg = erlang:port_call(Prt, 0, Msg),
[{trace, Prt, 'receive', {S, {call, {0, BinMsg}}}},
{trace, Prt, send, {Prt, {call, BinMsg}}, S}] = flush()
end,
Test({hello, world, make_ref()}),
Test({hello, world, lists:seq(1,1000)}),
close(Prt, Flags),
ok.
%% Test that driver_output generate correct trace messages
output(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT, 123456:32>>),
recv({Prt,{data,<<123456:32>>}}),
[{trace, Prt, send, {Prt, {data, <<123456:32>>}}, S}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_output2 generate correct trace messages
output2(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT2, 123456:32>>),
recv({Prt,{data,[$a|<<123456:32>>]}}),
[{trace, Prt, send, {Prt, {data, [$a|<<123456:32>>]}}, S}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_output_binary generate correct trace messages
output_binary(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT_BINARY, 0, 123456:32>>),
recv({Prt,{data,[$a|<<123456:32>>]}}),
[{trace, Prt, send, {Prt, {data, [$a|<<123456:32>>]}}, S}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_outputv generate correct trace messages
outputv(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_OUTPUTV, 123456:32>>),
recv({Prt,{data,[$a|<<123456:32>>]}}),
[{trace, Prt, send, {Prt, {data, [$a|<<123456:32>>]}}, S}] = flush(),
erlang:port_close(Prt),
[] = flush(),
ok.
%% Test that driver_set_timer generate correct trace messages
set_timer(_Config) ->
Flags = [send,'receive'],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_SET_TIMER>>),
timer:sleep(100),
[{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_SET_TIMER>>}}},
{trace, Prt, 'receive', timeout}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_failure* generate correct trace messages
failure_eof(_Config) ->
Flags = [send,'receive', ports],
S = trace_ports(Flags),
Prt = erlang:open_port({spawn, echo_drv}, [eof, binary]),
[{trace, Prt, open, S, echo_drv},
{trace, Prt, getting_linked, S}] = flush(),
erlang:port_command(Prt, <<?ECHO_DRV_FAILURE_EOF>>),
recv({Prt,eof}),
[{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_FAILURE_EOF>>}}},
{trace, Prt, send, {Prt, eof}, S}] = flush(),
close(Prt, Flags),
%% Run same test without eof option
failure_test(<<?ECHO_DRV_FAILURE_EOF>>, normal).
failure_atom(_Config) ->
failure_test(<<?ECHO_DRV_FAILURE_ATOM, "failure\0">>, failure).
failure_posix(_Config) ->
failure_test(<<?ECHO_DRV_FAILURE_POSIX>>, eagain).
failure(_Config) ->
failure_test(<<?ECHO_DRV_FAILURE, 1>>, 1).
failure_test(Failure, Reason) ->
{Prt, S} = trace_and_open([send, 'receive', ports],[binary]),
[{trace, Prt, open, S, echo_drv},
{trace, Prt, getting_linked, S}] = flush(),
process_flag(trap_exit, true),
erlang:port_command(Prt, Failure),
try
recv({'EXIT',Prt,Reason})
after
process_flag(trap_exit, false)
end,
[{trace, Prt, 'receive', {S, {command, Failure}}},
{trace, Prt, closed, Reason},
{trace, Prt, unlink, S}] = flush(),
ok.
%% Test that erl_drv_output_term generate correct trace messages
output_term(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT_TERM, 123456:32>>),
recv({echo, Prt, <<123456:32>>}),
[{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_output_term generate correct trace messages
driver_output_term(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_DRIVER_OUTPUT_TERM, 123456:32>>),
recv({echo, Prt, <<123456:32>>}),
[{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(),
close(Prt, Flags),
ok.
%% Test that erl_drv_send_term generate correct trace messages
send_term(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_SEND_TERM, 123456:32>>),
recv({echo, Prt, <<123456:32>>}),
[{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(),
{Pid, Ref} = spawn_monitor(fun() -> erlang:port_command(Prt, <<?ECHO_DRV_SAVE_CALLER>>) end),
recv({'DOWN',Ref,process,Pid,normal}),
erlang:port_command(Prt, <<?ECHO_DRV_SEND_TERM, 123456:32>>),
[{trace, Prt, send_to_non_existing_process, {echo, Prt, <<123456:32>>}, Pid}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_send_term generate correct trace messages
driver_send_term(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_DRIVER_SEND_TERM, 123456:32>>),
recv({echo, Prt, <<123456:32>>}),
[{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(),
{Pid, Ref} = spawn_monitor(fun() -> erlang:port_command(Prt, <<?ECHO_DRV_SAVE_CALLER>>) end),
recv({'DOWN',Ref,process,Pid,normal}),
erlang:port_command(Prt, <<?ECHO_DRV_SEND_TERM, 123456:32>>),
[{trace, Prt, send_to_non_existing_process, {echo, Prt, <<123456:32>>}, Pid}] = flush(),
close(Prt, Flags),
ok.
%% Test that driver_send_term from non-scheduler thread does not
%% generate trace messages.
driver_remote_send_term(_Config) ->
Flags = [send],
{Prt, S} = trace_and_open(Flags,[binary]),
erlang:port_command(Prt, <<?ECHO_DRV_REMOTE_SEND_TERM, 123456:32>>),
recv({echo, Prt, <<123456:32>>}),
[] = flush(),
Pid = spawn_link(
fun() ->
erlang:port_command(Prt, <<?ECHO_DRV_SAVE_CALLER>>),
S ! ok,
receive M -> S ! M end
end),
recv(ok),
erlang:trace(Pid, true, ['receive']),
erlang:port_command(Prt, <<?ECHO_DRV_REMOTE_SEND_TERM, 123456:32>>),
recv({echo, Prt, <<123456:32>>}),
[{trace, Pid, 'receive', {echo, Prt, <<123456:32>>}}] = flush(),
close(Prt, Flags),
ok.
%%%%%%%%%%%%%%%%%%%
%% Helper functions
%%%%%%%%%%%%%%%%%%%
trace_ports(TraceFlags) ->
erlang:trace(new_ports, true, TraceFlags),
self().
trace_and_open(TraceFlags, OpenFlags) ->
S = self(),
Ports = proplists:get_value(ports, TraceFlags),
[trace_ports(TraceFlags) || Ports],
Prt = erlang:open_port({spawn, echo_drv}, OpenFlags),
[erlang:trace(Prt, true, TraceFlags) || Ports == undefined],
{Prt, S}.
close(Prt, Flags) ->
Recv = proplists:get_value('receive', Flags),
Ports = proplists:get_value(ports, Flags),
S = self(),
erlang:port_close(Prt),
if Recv, Ports ->
[{trace, Prt, 'receive', {S, close}},
{trace, Prt, closed, normal},
{trace, Prt, unlink, S}] = flush();
Recv ->
[{trace, Prt, 'receive', {S, close}}] = flush();
Ports ->
[{trace, Prt, closed, normal},
{trace, Prt, unlink, S}] = flush();
true ->
[] = flush()
end.
trace_delivered() ->
Ref = erlang:trace_delivered(all),
receive {trace_delivered, all, Ref} -> ok end.
flush() ->
flush(all).
flush(From) ->
trace_delivered(),
f(From).
f(From) ->
receive
M when From =:= all; element(2, M) == From ->
[M | f(From)]
after 0 ->
[]
end.
recv(Msg) ->
receive Msg -> ok after 1000 -> ct:fail({did_not_get_data,Msg,flush()}) end.
load_drv(Config) ->
Path = proplists:get_value(data_dir, Config),
case erl_ddll:load_driver(Path, echo_drv) of
ok -> ok;
{error, Error} = Res ->
io:format("~s\n", [erl_ddll:format_error(Error)]),
ct:fail(Res)
end.
reload_drv(Config) ->
erl_ddll:unload_driver(echo_drv),
load_drv(Config).
