<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
<year>2003</year><year>2012</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
</legalnotice>
<title>Running Tests</title>
<prepared>Peter Andersson, Kenneth Lundin</prepared>
<docno></docno>
<date></date>
<rev></rev>
<file>run_test_chapter.xml</file>
</header>
<section>
<title>Using the Common Test Framework</title>
<p>The Common Test Framework provides a high level
operator interface for testing. It adds the following features to
the Erlang/OTP Test Server:</p>
<list>
<item>Automatic compilation of test suites (and help modules).</item>
<item>Creation of additional HTML pages for better overview.</item>
<item>Single command interface for running all available tests.</item>
<item>Handling of configuration files specifying data related to
the System Under Test (and any other variable data).</item>
<item>Mode for running multiple independent test sessions in parallel with
central control and configuration.</item>
</list>
</section>
<section>
<title>Automatic compilation of test suites and help modules</title>
<p>When Common Test starts, it will automatically attempt to compile any
suites included in the specified tests. If particular
suites have been specified, only those suites will be compiled. If a
particular test object directory has been specified (meaning all suites
in this directory should be part of the test), Common Test runs
make:all/1 in the directory to compile the suites.</p>
<p>If compilation should fail for one or more suites, the compilation errors
are printed to tty and the operator is asked if the test run should proceed
without the missing suites, or be aborted. If the operator chooses to proceed,
it is noted in the HTML log which tests have missing suites.</p>
<p>Any help module (i.e. regular Erlang module with name not ending with
"_SUITE") that resides in the same test object directory as a suite
which is part of the test, will also be automatically compiled. A help
module will not be mistaken for a test suite (unless it has a "_SUITE"
name of course). All help modules in a particular test object directory
are compiled no matter if all or only particular suites in the directory
are part of the test.</p>
<p>If test suites or help modules include header files stored in other
locations than the test directory, you may specify these include directories
by means of the <c><![CDATA[-include]]></c> flag with <c><![CDATA[ct_run]]></c>,
or the <c><![CDATA[include]]></c> option with <c><![CDATA[ct:run_test/1]]></c>.
In addition to this, an include path may be specified with an OS
environment variable; <c><![CDATA[CT_INCLUDE_PATH]]></c>. Example (bash):</p>
<p><c>$ export CT_INCLUDE_PATH=~testuser/common_suite_files/include:~testuser/common_lib_files/include</c></p>
<p>Common Test will pass all include directories (specified either with the
<c><![CDATA[include]]></c> flag/option, or the <c><![CDATA[CT_INCLUDE_PATH]]></c>
variable, or both) to the compiler.</p>
<p>It is also possible to specify include directories in test specifications
(see below).</p>
<p>If the user wants to run all test suites for a test object (or OTP application)
by specifying only the top directory (e.g. with the <c>dir</c> start flag/option),
Common Test will primarily look for test suite modules in a subdirectory named
<c>test</c>. If this subdirectory doesn't exist, the specified top directory
is assumed to be the actual test directory, and test suites will be read from
there instead.</p>
<p>It is possible to disable the automatic compilation feature by using the
<c><![CDATA[-no_auto_compile]]></c> flag with <c><![CDATA[ct_run]]></c>, or
the <c><![CDATA[{auto_compile,false}]]></c> option with
<c><![CDATA[ct:run_test/1]]></c>. With automatic compilation
disabled, the user is responsible for compiling the test suite modules
(and any help modules) before the test run. If the modules can not be loaded
from the local file system during startup of Common Test, the user needs to
pre-load the modules before starting the test. Common Test will only verify
that the specified test suites exist (i.e. that they are, or can be, loaded).
This is useful e.g. if the test suites are transferred and loaded as binaries via
RPC from a remote node.</p>
</section>
<marker id="ct_run"></marker>
<section>
<title>Running tests from the OS command line</title>
<p>The <c>ct_run</c> program can be used for running tests from
the OS command line, e.g.
</p>
<list>
<item><c><![CDATA[ct_run -config <configfilenames> -dir <dirs>]]></c></item>
<item><c><![CDATA[ct_run -config <configfilenames> -suite <suiteswithfullpath>]]></c>
</item>
<item><c><![CDATA[ct_run -userconfig <callbackmodulename> <configfilenames> -suite <suiteswithfullpath>]]></c>
</item>
<item><c><![CDATA[ct_run -config <configfilenames> -suite <suitewithfullpath>
-group <groupnames> -case <casenames>]]></c></item>
</list>
<p>Examples:</p>
<p><c>$ ct_run -config $CFGS/sys1.cfg $CFGS/sys2.cfg -dir $SYS1_TEST $SYS2_TEST</c></p>
<p><c>$ ct_run -userconfig ct_config_xml $CFGS/sys1.xml $CFGS/sys2.xml -dir $SYS1_TEST $SYS2_TEST</c></p>
<p><c>$ ct_run -suite $SYS1_TEST/setup_SUITE $SYS2_TEST/config_SUITE</c></p>
<p><c>$ ct_run -suite $SYS1_TEST/setup_SUITE -case start stop</c></p>
<p><c>$ ct_run -suite $SYS1_TEST/setup_SUITE -group installation -case start stop</c></p>
<p>It is also possible to combine the <c>dir</c>, <c>suite</c> and <c>group/case</c> flags. E.g, to run
<c>x_SUITE</c> and <c>y_SUITE</c> in directory <c>testdir</c>:</p>
<p><c>$ ct_run -dir ./testdir -suite x_SUITE y_SUITE</c></p>
<p>This has the same effect as calling:</p>
<p><c>$ ct_run -suite ./testdir/x_SUITE ./testdir/y_SUITE</c></p>
<p>Other flags that may be used with <c>ct_run</c>:</p>
<list>
<item><c><![CDATA[-logdir <dir>]]></c>, specifies where the HTML log files are to be written.</item>
<item><c><![CDATA[-label <name_of_test_run>]]></c>, associates the test run with a name that gets printed
in the overview HTML log files.</item>
<item><c>-refresh_logs</c>, refreshes the top level HTML index files.</item>
<item><c>-vts</c>, start web based GUI (see below).</item>
<item><c>-shell</c>, start interactive shell mode (see below).</item>
<item><c>-step [step_opts]</c>, step through test cases using the Erlang Debugger (see below).</item>
<item><c><![CDATA[-spec <testspecs>]]></c>, use test specification as input (see below).</item>
<item><c>-allow_user_terms</c>, allows user specific terms in a test specification (see below).</item>
<item><c>-silent_connections [conn_types]</c>, tells Common Test to suppress printouts for
specified connections (see below).</item>
<item><c><![CDATA[-stylesheet <css_file>]]></c>, points out a user HTML style sheet (see below).</item>
<item><c><![CDATA[-cover <cover_cfg_file>]]></c>, to perform code coverage test (see
<seealso marker="cover_chapter#cover">Code Coverage Analysis</seealso>).</item>
<item><c><![CDATA[-cover_stop <bool>]]></c>, to specify if the cover tool shall be stopped after the test is completed (see
<seealso marker="cover_chapter#cover_stop">Code Coverage Analysis</seealso>).</item>
<item><c><![CDATA[-event_handler <event_handlers>]]></c>, to install
<seealso marker="event_handler_chapter#event_handling">event handlers</seealso>.</item>
<item><c><![CDATA[-event_handler_init <event_handlers>]]></c>, to install
<seealso marker="event_handler_chapter#event_handling">event handlers</seealso> including start arguments.</item>
<item><c><![CDATA[-ct_hooks <ct_hooks>]]></c>, to install
<seealso marker="ct_hooks_chapter#installing">Common Test Hooks</seealso> including start arguments.</item>
<item><c><![CDATA[-enable_builtin_hooks <bool>]]></c>, to enable/disable
<seealso marker="ct_hooks_chapter#builtin_cths">Built-in Common Test Hooks</seealso>. Default is <c>true</c>.</item>
<item><c><![CDATA[-include]]></c>, specifies include directories (see above).</item>
<item><c><![CDATA[-no_auto_compile]]></c>, disables the automatic test suite compilation feature (see above).</item>
<item><c><![CDATA[-multiply_timetraps <n>]]></c>, extends <seealso marker="write_test_chapter#timetraps">timetrap
timeout</seealso> values.</item>
<item><c><![CDATA[-scale_timetraps <bool>]]></c>, enables automatic <seealso marker="write_test_chapter#timetraps">timetrap
timeout</seealso> scaling.</item>
<item><c><![CDATA[-repeat <n>]]></c>, tells Common Test to repeat the tests n times (see below).</item>
<item><c><![CDATA[-duration <time>]]></c>, tells Common Test to repeat the tests for duration of time (see below).</item>
<item><c><![CDATA[-until <stop_time>]]></c>, tells Common Test to repeat the tests until stop_time (see below).</item>
<item><c>-force_stop</c>, on timeout, the test run will be aborted when current test job is finished (see below).</item>
<item><c><![CDATA[-decrypt_key <key>]]></c>, provides a decryption key for
<seealso marker="config_file_chapter#encrypted_config_files">encrypted configuration files</seealso>.</item>
<item><c><![CDATA[-decrypt_file <key_file>]]></c>, points out a file containing a decryption key for
<seealso marker="config_file_chapter#encrypted_config_files">encrypted configuration files</seealso>.</item>
<item><c><![CDATA[-basic_html]]></c>, switches off html enhancements that might not be compatible with older browsers.</item>
<item><c><![CDATA[-logopts <opts>]]></c>, makes it possible to modify aspects of the logging behaviour, see
<seealso marker="run_test_chapter#logopts">Log options</seealso> below.</item>
<item><c><![CDATA[-verbosity <levels>]]></c>, sets <seealso marker="write_test_chapter#logging">verbosity levels
for printouts</seealso>.</item>
</list>
<note><p>Directories passed to Common Test may have either relative or absolute paths.</p></note>
<note><p>Arbitrary start flags to the Erlang Runtime System may also be passed as
parameters to <c>ct_run</c>. It is, for example, useful to be able to
pass directories that should be added to the Erlang code server search path
with the <c>-pa</c> or <c>-pz</c> flag. If you have common help- or library
modules for test suites (separately compiled), stored in other directories
than the test suite directories, these help/lib directories are preferrably
added to the code path this way. Example:</p>
<p><c>$ ct_run -dir ./chat_server -logdir ./chat_server/testlogs -pa $PWD/chat_server/ebin</c></p>
<p>Note how in this example, the absolute path of the <c>chat_server/ebin</c>
directory is passed to the code server. This is essential since relative
paths are stored by the code server as relative, and Common Test changes
the current working directory of the Erlang Runtime System during the test run!</p>
</note>
<p>The <c>ct_run</c> program sets the exit status before shutting down. The following values
are defined:</p>
<list>
<item><c>0</c> indicates a successful testrun, i.e. one without failed or auto-skipped test cases.</item>
<item><c>1</c> indicates that one or more test cases have failed, or have been auto-skipped.</item>
<item><c>2</c> indicates that the test execution has failed because of e.g. compilation errors, an
illegal return value from an info function, etc.</item>
</list>
<p>If auto-skipped test cases should not affect the exit status, you may change the default
behaviour using start flag:</p>
<pre>-exit_status ignore_config</pre>
<p>For more information about the <c>ct_run</c> program, see the
<seealso marker="ct_run#top">Reference Manual</seealso> and the
<seealso marker="install_chapter#general">Installation</seealso> chapter.
</p>
</section>
<section>
<title>Running tests from the Erlang shell or from an Erlang program</title>
<p>Common Test provides an Erlang API for running tests. The main (and most
flexible) function for specifying and executing tests is called
<c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>.
This function takes the same start parameters as
the <c><seealso marker="run_test_chapter#ct_run">ct_run</seealso></c>
program described above, only the flags are instead
given as options in a list of key-value tuples. E.g. a test specified
with <c>ct_run</c> like:</p>
<p><c>$ ct_run -suite ./my_SUITE -logdir ./results</c></p>
<p>is with <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c> specified as:</p>
<p><c>1> ct:run_test([{suite,"./my_SUITE"},{logdir,"./results"}]).</c></p>
<p>The function returns the test result, represented by the tuple:
<c>{Ok,Failed,{UserSkipped,AutoSkipped}}</c>, where each element is an
integer. If test execution fails, the function returns the tuple:
<c>{error,Reason}</c>, where the term <c>Reason</c> explains the
failure.</p>
<section>
<title>Releasing the Erlang shell</title>
<p>During execution of tests, started with
<c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>,
the Erlang shell process, controlling stdin, will remain the top
level process of the Common Test system of processes. The result
is that the Erlang shell is not available for interaction during
the test run. If this is not desirable, maybe because the shell is needed
for debugging purposes or for interaction with the SUT during test
execution, you may set the <c>release_shell</c> start option to
<c>true</c> (in the call to <c>ct:run_test/1</c> or by
using the corresponding test specification term, see below). This will
make Common Test release the shell immediately after the test suite
compilation stage. To accomplish this, a test runner process
is spawned to take control of the test execution, and the effect is that
<c>ct:run_test/1</c> returns the pid of this process rather than the
test result - which instead is printed to tty at the end of the test run.</p>
<note><p>Note that in order to use the
<c><seealso marker="ct#break-1">ct:break/1/2</seealso></c> and
<c><seealso marker="ct#continue-0">ct:continue/0/1</seealso></c> functions,
<c>release_shell</c> <em>must</em> be set to <c>true</c>.</p></note>
</section>
<p>For detailed documentation about
<c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>,
please see the
<c><seealso marker="ct#run_test-1">ct</seealso></c> manual page.</p>
</section>
<section>
<title>Running the interactive shell mode</title>
<p>You can start Common Test in an interactive shell mode where no
automatic testing is performed. Instead, in this mode, Common Test
starts its utility processes, installs configuration data (if any),
and waits for the user to call functions (typically test case support
functions) from the Erlang shell.</p>
<p>The shell mode is useful e.g. for debugging test suites, for analysing
and debugging the SUT during "simulated" test case execution, and
for trying out various operations during test suite development.</p>
<p>To invoke the interactive shell mode, you can start an Erlang shell
manually and call <c><seealso marker="ct#install-1">ct:install/1</seealso></c> to install any configuration
data you might need (use <c>[]</c> as argument otherwise), then
call <c><seealso marker="ct#start_interactive-0">ct:start_interactive/0</seealso></c> to start Common Test. If you use
the <c>ct_run</c> program, you may start the Erlang shell and Common Test
in the same go by using the <c>-shell</c> and, optionally, the <c>-config</c>
and/or <c>-userconfig</c> flag. Examples:
</p>
<list>
<item><c>ct_run -shell</c></item>
<item><c><![CDATA[ct_run -shell -config cfg/db.cfg]]></c></item>
<item><c><![CDATA[ct_run -shell -userconfig db_login testuser x523qZ]]></c></item>
</list>
<p>If no config file is given with the <c>ct_run</c> command,
a warning will be displayed. If Common Test has been run from the same
directory earlier, the same config file(s) will be used
again. If Common Test has not been run from this directory before, no
config files will be available.</p>
<p>If any functions using "required config data" (e.g. ct_telnet or
ct_ftp functions) are to be called from the erlang shell, config
data must first be required with <c><seealso marker="ct#require-1">
ct:require/1/2</seealso></c>. This is
equivalent to a <c>require</c> statement in the <seealso
marker="write_test_chapter#suite">Test Suite Info
Function</seealso> or in the <seealso
marker="write_test_chapter#info_function">Test Case Info
Function</seealso>.</p>
<p>Example:</p>
<pre>
1> ct:require(unix_telnet, unix).
ok
2> ct_telnet:open(unix_telnet).
{ok,<0.105.0>}
4> ct_telnet:cmd(unix_telnet, "ls .").
{ok,["ls .","file1 ...",...]}
</pre>
<p>Everything that Common Test normally prints in the test case logs,
will in the interactive mode be written to a log named
<c>ctlog.html</c> in the <c><![CDATA[ct_run.<timestamp>]]></c>
directory. A link to this file will be available in the file
named <c>last_interactive.html</c> in the directory from which
you executed <c>ct_run</c>. Currently, specifying a different
root directory for the logs than the current working directory,
is not supported.</p>
<p>If you wish to exit the interactive mode (e.g. to start an
automated test run with <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>), call the function
<c><seealso marker="ct#stop_interactive-0">ct:stop_interactive/0</seealso></c>. This shuts down the
running <c>ct</c> application. Associations between
configuration names and data created with <c>require</c> are
consequently deleted. <c><seealso marker="ct#start_interactive-0">ct:start_interactive/0</seealso></c> will get you
back into interactive mode, but the previous state is not restored.</p>
</section>
<section>
<title>Step by step execution of test cases with the Erlang Debugger</title>
<p>By means of <c>ct_run -step [opts]</c>, or by passing the
<c>{step,Opts}</c> option to <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>, it is possible
to get the Erlang Debugger started automatically and use its
graphical interface to investigate the state of the current test
case and to execute it step by step and/or set execution breakpoints.</p>
<p>If no extra options are given with the <c>step</c> flag/option,
breakpoints will be set automatically on the test cases that
are to be executed by Common Test, and those functions only. If
the step option <c>config</c> is specified, breakpoints will
also be initially set on the configuration functions in the suite, i.e.
<c>init_per_suite/1</c>, <c>end_per_suite/1</c>,
<c>init_per_group/2</c>, <c>end_per_group/2</c>,
<c>init_per_testcase/2</c> and <c>end_per_testcase/2</c>.</p>
<p>Common Test enables the Debugger auto attach feature, which means
that for every new interpreted test case function that starts to execute,
a new trace window will automatically pop up. (This is because each test
case executes on a dedicated Erlang process). Whenever a new test case starts,
Common Test will attempt to close the inactive trace window of the previous
test case. However, if you prefer that Common Test leaves inactive trace
windows, use the <c>keep_inactive</c> option.</p>
<p>The step functionality can be used together with the <c>suite</c> and
the <c>suite</c> + <c>case/testcase</c> flag/option, but not together
with <c>dir</c>.</p>
</section>
<marker id="test_specifications"></marker>
<section>
<title>Test Specifications</title>
<p>The most flexible way to specify what to test, is to use a so
called test specification. A test specification is a sequence of
Erlang terms. The terms are normally declared in a text file (see
<c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c>), but
may also be passed to Common Test on the form of a list (see
<c><seealso marker="ct#run_testspec-1">ct:run_testspec/1</seealso></c>).
There are two general types of terms: configuration terms and test
specification terms.</p>
<p>With configuration terms it is possible to e.g. label the test
run (similar to <c>ct_run -label</c>), evaluate arbitrary expressions
before starting the test, import configuration data (similar to
<c>ct_run -config/-userconfig</c>), specify the top level HTML log
directory (similar to <c>ct_run -logdir</c>), enable code coverage
analysis (similar to <c>ct_run -cover</c>), install Common Test Hooks
(similar to <c>ct_run -ch_hooks</c>), install event_handler plugins
(similar to <c>ct_run -event_handler</c>), specify include directories
that should be passed to the compiler for automatic compilation
(similar to <c>ct_run -include</c>), disable the auto compilation
feature (similar to <c>ct_run -no_auto_compile</c>), set verbosity
levels (similar to <c>ct_run -verbosity</c>), and more.</p>
<p>Configuration terms can be combined with <c>ct_run</c> start flags,
or <c>ct:run_test/1</c> options. The result will for some flags/options
and terms be that the values are merged (e.g. configuration files,
include directories, verbosity levels, silent connections), and for
others that the start flags/options override the test specification
terms (e.g. log directory, label, style sheet, auto compilation).</p>
<p>With test specification terms it is possible to state exactly
which tests should run and in which order. A test term specifies
either one or more suites, one or more test case groups, or one
or more test cases in a group or suite.</p>
<p>An arbitrary number of test terms may be declared in sequence.
Common Test will by default compile the terms into one or more tests
to be performed in one resulting test run. Note that a term that
specifies a set of test cases will "swallow" one that only
specifies a subset of these cases. E.g. the result of merging
one term that specifies that all cases in suite S should be
executed, with another term specifying only test case X and Y in
S, is a test of all cases in S. However, if a term specifying
test case X and Y in S is merged with a term specifying case Z
in S, the result is a test of X, Y and Z in S. To disable this
behaviour, i.e. to instead perform each test sequentially in a "script-like"
manner, the term <c>merge_tests</c> can be set to <c>false</c> in
the test specification.</p>
<p>A test term can also specify one or more test suites, groups,
or test cases to be skipped. Skipped suites, groups and cases
are not executed and show up in the HTML log files as
SKIPPED.</p>
<p>When a test case group is specified, the resulting test
executes the
<c>init_per_group</c> function, followed by all test cases and
sub groups (including their configuration functions), and
finally the <c>end_per_group</c> function. Also if particular
test cases in a group are specified, <c>init_per_group</c>
and <c>end_per_group</c> for the group in question are
called. If a group which is defined (in <c>Suite:group/0</c>) to
be a sub group of another group, is specified (or particular test
cases of a sub group are), Common Test will call the configuration
functions for the top level groups as well as for the sub group
in question (making it possible to pass configuration data all
the way from <c>init_per_suite</c> down to the test cases in the
sub group).</p>
<p>With the <c>GroupSpec</c> element (below) it's possible to specify
group execution properties that will override those specified in the
group definition (i.e. in <c>groups/0</c>). Execution properties for
sub-groups may be overridden as well. This feature makes it possible to
change properties of groups at the time of execution,
without even having to edit the test suite. More detailed documentation,
and examples, can be found in the
<seealso marker="write_test_chapter#test_case_groups">
Test case groups</seealso> chapter.</p>
<p>Below is the test specification syntax. Test specifications can
be used to run tests both in a single test host environment and
in a distributed Common Test environment (Large Scale
Testing). The node parameters in the <c>init</c> term are only
relevant in the latter (see the
<seealso marker="ct_master_chapter#test_specifications">Large
Scale Testing</seealso> chapter for information). For more information
about the various terms, please see the corresponding sections in the
User's Guide, such as e.g. the
<seealso marker="run_test_chapter#ct_run"><c>ct_run</c>
program</seealso> for an overview of available start flags
(since most flags have a corresponding configuration term), and
more detailed explanation of e.g.
<seealso marker="write_test_chapter#logging">Logging</seealso>
(for the <c>verbosity</c>, <c>stylesheet</c> and <c>basic_html</c> terms),
<seealso marker="config_file_chapter#top">External Configuration Data</seealso>
(for the <c>config</c> and <c>userconfig</c> terms),
<seealso marker="event_handler_chapter#event_handling">Event
Handling</seealso> (for the <c>event_handler</c> term),
<seealso marker="ct_hooks_chapter#installing">Common Test Hooks</seealso>
(for the <c>ct_hooks</c> term), etc.</p>
<p>Config terms:</p>
<pre>
{merge_tests, Bool}.
{define, Constant, Value}.
{node, NodeAlias, Node}.
{init, InitOptions}.
{init, [NodeAlias], InitOptions}.
{label, Label}.
{label, NodeRefs, Label}.
{verbosity, VerbosityLevels}.
{verbosity, NodeRefs, VerbosityLevels}.
{stylesheet, CSSFile}.
{stylesheet, NodeRefs, CSSFile}.
{silent_connections, ConnTypes}.
{silent_connections, NodeRefs, ConnTypes}.
{multiply_timetraps, N}.
{multiply_timetraps, NodeRefs, N}.
{scale_timetraps, Bool}.
{scale_timetraps, NodeRefs, Bool}.
{cover, CoverSpecFile}.
{cover, NodeRefs, CoverSpecFile}.
{cover_stop, Bool}.
{cover_stop, NodeRefs, Bool}.
{include, IncludeDirs}.
{include, NodeRefs, IncludeDirs}.
{auto_compile, Bool},
{auto_compile, NodeRefs, Bool},
{config, ConfigFiles}.
{config, ConfigDir, ConfigBaseNames}.
{config, NodeRefs, ConfigFiles}.
{config, NodeRefs, ConfigDir, ConfigBaseNames}.
{userconfig, {CallbackModule, ConfigStrings}}.
{userconfig, NodeRefs, {CallbackModule, ConfigStrings}}.
{logdir, LogDir}.
{logdir, NodeRefs, LogDir}.
{logopts, LogOpts}.
{logopts, NodeRefs, LogOpts}.
{create_priv_dir, PrivDirOption}.
{create_priv_dir, NodeRefs, PrivDirOption}.
{event_handler, EventHandlers}.
{event_handler, NodeRefs, EventHandlers}.
{event_handler, EventHandlers, InitArgs}.
{event_handler, NodeRefs, EventHandlers, InitArgs}.
{ct_hooks, CTHModules}.
{ct_hooks, NodeRefs, CTHModules}.
{enable_builtin_hooks, Bool}.
{basic_html, Bool}.
{basic_html, NodeRefs, Bool}.
{release_shell, Bool}.</pre>
<p>Test terms:</p>
<pre>
{suites, Dir, Suites}.
{suites, NodeRefs, Dir, Suites}.
{groups, Dir, Suite, Groups}.
{groups, NodeRefs, Dir, Suite, Groups}.
{groups, Dir, Suite, GroupSpec, {cases,Cases}}.
{groups, NodeRefs, Dir, Suite, GroupSpec, {cases,Cases}}.
{cases, Dir, Suite, Cases}.
{cases, NodeRefs, Dir, Suite, Cases}.
{skip_suites, Dir, Suites, Comment}.
{skip_suites, NodeRefs, Dir, Suites, Comment}.
{skip_groups, Dir, Suite, GroupNames, Comment}.
{skip_groups, NodeRefs, Dir, Suite, GroupNames, Comment}.
{skip_cases, Dir, Suite, Cases, Comment}.
{skip_cases, NodeRefs, Dir, Suite, Cases, Comment}.</pre>
<p>Types:</p>
<pre>
Bool = true | false
Constant = atom()
Value = term()
NodeAlias = atom()
Node = node()
NodeRef = NodeAlias | Node | master
NodeRefs = all_nodes | [NodeRef] | NodeRef
InitOptions = term()
Label = atom() | string()
VerbosityLevels = integer() | [{Category,integer()}]
Category = atom()
CSSFile = string()
ConnTypes = all | [atom()]
N = integer()
CoverSpecFile = string()
IncludeDirs = string() | [string()]
ConfigFiles = string() | [string()]
ConfigDir = string()
ConfigBaseNames = string() | [string()]
CallbackModule = atom()
ConfigStrings = string() | [string()]
LogDir = string()
LogOpts = [term()]
PrivDirOption = auto_per_run | auto_per_tc | manual_per_tc
EventHandlers = atom() | [atom()]
InitArgs = [term()]
CTHModules = [CTHModule | {CTHModule, CTHInitArgs} | {CTHModule, CTHInitArgs, CTHPriority}]
CTHModule = atom()
CTHInitArgs = term()
Dir = string()
Suites = atom() | [atom()] | all
Suite = atom()
Groups = GroupSpec | [GroupSpec] | all
GroupSpec = GroupName | {GroupName,Properties} | {GroupName,Properties,GroupSpec}
GroupName = atom()
GroupNames = GroupName | [GroupName]
Cases = atom() | [atom()] | all
Comment = string() | ""</pre>
<p>The difference between the <c>config</c> terms above, is that with
<c>ConfigDir</c>, <c>ConfigBaseNames</c> is a list of base names,
i.e. without directory paths. <c>ConfigFiles</c> must be full names,
including paths. E.g, these two terms have the same meaning:</p>
<pre>
{config, ["/home/testuser/tests/config/nodeA.cfg",
"/home/testuser/tests/config/nodeB.cfg"]}.
{config, "/home/testuser/tests/config", ["nodeA.cfg","nodeB.cfg"]}.</pre>
<note><p>Any relative paths specified in the test specification, will be
relative to the directory which contains the test specification file, if
<c>ct_run -spec TestSpecFile ...</c> or
<c>ct:run:test([{spec,TestSpecFile},...])</c>
executes the test. The path will be relative to the top level log directory, if
<c>ct:run:testspec(TestSpec)</c> executes the test.</p></note>
<p>The <c>define</c> term introduces a constant, which is used to
replace the name <c>Constant</c> with <c>Value</c>, wherever it's found in
the test specification. This replacement happens during an initial iteration
through the test specification. Constants may be used anywhere in the test
specification, e.g. in arbitrary lists and tuples, and even in strings
and inside the value part of other constant definitions! A constant can
also be part of a node name, but that is the only place where a constant
can be part of an atom.</p>
<note><p>For the sake of readability, the name of the constant must always
begin with an upper case letter, or a <c>$</c>, <c>?</c>, or <c>_</c>.
This also means that it must always be single quoted (obviously, since
the constant name is actually an atom, not text).</p></note>
<p>The main benefit of constants is that they can be used to reduce the size
(and avoid repetition) of long strings, such as file paths. Compare these
terms:</p>
<pre>
%% 1a. no constant
{config, "/home/testuser/tests/config", ["nodeA.cfg","nodeB.cfg"]}.
{suites, "/home/testuser/tests/suites", all}.
%% 1b. with constant
{define, 'TESTDIR', "/home/testuser/tests"}.
{config, "'TESTDIR'/config", ["nodeA.cfg","nodeB.cfg"]}.
{suites, "'TESTDIR'/suites", all}.
%% 2a. no constants
{config, [testnode@host1, testnode@host2], "../config", ["nodeA.cfg","nodeB.cfg"]}.
{suites, [testnode@host1, testnode@host2], "../suites", [x_SUITE, y_SUITE]}.
%% 2b. with constants
{define, 'NODE', testnode}.
{define, 'NODES', ['NODE'@host1, 'NODE'@host2]}.
{config, 'NODES', "../config", ["nodeA.cfg","nodeB.cfg"]}.
{suites, 'NODES', "../suites", [x_SUITE, y_SUITE]}.</pre>
<p>Constants make the test specification term <c>alias</c>, in previous
versions of Common Test, redundant. This term has been deprecated but will
remain supported in upcoming Common Test releases. Replacing <c>alias</c>
terms with <c>define</c> is strongly recommended though! Here's an example
of such a replacement:</p>
<pre>
%% using the old alias term
{config, "/home/testuser/tests/config/nodeA.cfg"}.
{alias, suite_dir, "/home/testuser/tests/suites"}.
{groups, suite_dir, x_SUITE, group1}.
%% replacing with constants
{define, 'TestDir', "/home/testuser/tests"}.
{define, 'CfgDir', "'TestDir'/config"}.
{define, 'SuiteDir', "'TestDir'/suites"}.
{config, 'CfgDir', "nodeA.cfg"}.
{groups, 'SuiteDir', x_SUITE, group1}.</pre>
<p>Actually, constants could well replace the <c>node</c> term too, but
this still has declarative value, mainly when used in combination
with <c>NodeRefs == all_nodes</c> (see types above).</p>
<p>Here follows a simple test specification example:</p>
<pre>
{define, 'Top', "/home/test"}.
{define, 'T1', "'Top'/t1"}.
{define, 'T2', "'Top'/t2"}.
{define, 'T3', "'Top'/t3"}.
{define, 'CfgFile', "config.cfg"}.
{logdir, "'Top'/logs"}.
{config, ["'T1'/'CfgFile'", "'T2'/'CfgFile'", "'T3'/'CfgFile'"]}.
{suites, 'T1', all}.
{skip_suites, 'T1', [t1B_SUITE,t1D_SUITE], "Not implemented"}.
{skip_cases, 'T1', t1A_SUITE, [test3,test4], "Irrelevant"}.
{skip_cases, 'T1', t1C_SUITE, [test1], "Ignore"}.
{suites, 'T2', [t2B_SUITE,t2C_SUITE]}.
{cases, 'T2', t2A_SUITE, [test4,test1,test7]}.
{skip_suites, 'T3', all, "Not implemented"}.</pre>
<p>The example specifies the following:</p>
<list>
<item>The specified logdir directory will be used for storing
the HTML log files (in subdirectories tagged with node name,
date and time).</item>
<item>The variables in the specified test system config files will be
imported for the test.</item>
<item>The first test to run includes all suites for system t1. Excluded from
the test are however the t1B and t1D suites. Also test cases test3 and
test4 in t1A as well as the test1 case in t1C are excluded from
the test.</item>
<item>Secondly, the test for system t2 should run. The included suites are
t2B and t2C. Included are also test cases test4, test1 and test7 in suite
t2A. Note that the test cases will be executed in the specified order.</item>
<item>Lastly, all suites for systems t3 are to be completely skipped and this
should be explicitly noted in the log files.</item>
</list>
<p>With the <c>init</c> term it's possible to specify initialization options
for nodes defined in the test specification. Currently, there are options
to start the node and/or to evaluate any function on the node.
See the <seealso marker="ct_master_chapter#ct_slave">Automatic startup of
the test target nodes</seealso> chapter for details.</p>
<p>It is possible for the user to provide a test specification that
includes (for Common Test) unrecognizable terms. If this is desired,
the <c>-allow_user_terms</c> flag should be used when starting tests with
<c>ct_run</c>. This forces Common Test to ignore unrecognizable terms.
Note that in this mode, Common Test is not able to check the specification
for errors as efficiently as if the scanner runs in default mode.
If <c><seealso marker="ct#run_test-1">ct:run_test/1</seealso></c> is used for starting the tests, the relaxed scanner
mode is enabled by means of the tuple: <c>{allow_user_terms,true}</c></p>
</section>
<section>
<title>Running tests from the Web based GUI</title>
<p>The web based GUI, VTS, is started with the
<c><seealso marker="run_test_chapter#ct_run">ct_run</seealso></c>
program. From the GUI you can load config files, and select
directories, suites and cases to run. You can also state the
config files, directories, suites and cases on the command line
when starting the web based GUI.
</p>
<list>
<item><c>ct_run -vts</c></item>
<item><c><![CDATA[ct_run -vts -config <configfilename>]]></c></item>
<item><c><![CDATA[ct_run -vts -config <configfilename> -suite <suitewithfullpath>
-case <casename>]]></c></item>
</list>
<p>From the GUI you can run tests and view the result and the logs.
</p>
<p>Note that <c>ct_run -vts</c> will try to open the Common Test start
page in an existing web browser window or start the browser if it is
not running. Which browser should be started may be specified with
the browser start command option:</p>
<p><c><![CDATA[ct_run -vts -browser <browser_start_cmd>]]></c></p>
<p>Example:</p>
<p><c><![CDATA[$ ct_run -vts -browser 'firefox&']]></c></p>
<p>Note that the browser must run as a separate OS process or VTS will hang!</p>
<p>If no specific browser start command is specified, Firefox will
be the default browser on Unix platforms and Internet Explorer on Windows.
If Common Test fails to start a browser automatically, or <c>'none'</c> is
specified as the value for -browser (i.e. <c>-browser none</c>), start your
favourite browser manually and type in the URL that Common Test
displays in the shell.</p>
</section>
<section>
<marker id="log_files"></marker>
<title>Log files</title>
<p>As the execution of the test suites proceed, events are logged in
four different ways:</p>
<list>
<item>Text to the operator's console.</item>
<item>Suite related information is sent to the major log file.</item>
<item>Case related information is sent to the minor log file.</item>
<item>The HTML overview log file gets updated with test results.</item>
<item>A link to all runs executed from a certain directory is written in
the log named "all_runs.html" and direct links to all tests (the
latest results) are written to the top level "index.html".</item>
</list>
<p>Typically the operator, who may run hundreds or thousands of
test cases, doesn't want to fill the console with details
about, or printouts from, the specific test cases. By default, the
operator will only see:</p>
<list>
<item>A confirmation that the test has started and information about how
many test cases will be executed totally.</item>
<item>A small note about each failed test case.</item>
<item>A summary of all the run test cases.</item>
<item>A confirmation that the test run is complete.</item>
<item>Some special information like error reports and progress
reports, printouts written with erlang:display/1, or io:format/3
specifically addressed to a receiver other than <c>standard_io</c>
(e.g. the default group leader process 'user').</item>
</list>
<p>If/when the operator wants to dig deeper into the general results, or
the result of a specific test case, he should do so by
following the links in the HTML presentation and take a look in the
major or minor log files. The "all_runs.html" page is a practical
starting point usually. It's located in <c>logdir</c> and contains
a link to each test run including a quick overview (date and time,
node name, number of tests, test names and test result totals).</p>
<p>An "index.html" page is written for each test run (i.e. stored in
the "ct_run" directory tagged with node name, date and time). This
file gives a short overview of all individual tests performed in the
same test run. The test names follow this convention:</p>
<list>
<item><em>TopLevelDir.TestDir</em> (all suites in TestDir executed)</item>
<item><em>TopLevelDir.TestDir:suites</em> (specific suites were executed)</item>
<item><em>TopLevelDir.TestDir.Suite</em> (all cases in Suite executed)</item>
<item><em>TopLevelDir.TestDir.Suite:cases</em> (specific test cases were executed)</item>
<item><em>TopLevelDir.TestDir.Suite.Case</em> (only Case was executed)</item>
</list>
<p>On the test run index page there is a link to the Common Test
Framework log file in which information about imported
configuration data and general test progress is written. This
log file is useful to get snapshot information about the test
run during execution. It can also be very helpful when
analyzing test results or debugging test suites.</p>
<p>On the test run index page it is noted if a test has missing
suites (i.e. suites that Common Test has failed to
compile). Names of the missing suites can be found in the
Common Test Framework log file.</p>
<p>The major logfile shows a detailed report of the test run. It
includes test suite and test case names, execution time, the
exact reason for failures etc. The information is available in both
a file with textual and with HTML representation. The HTML file shows a
summary which gives a good overview of the test run. It also has links
to each individual test case log file for quick viewing with an HTML
browser.</p>
<p>The minor log files contain full details of every single test
case, each one in a separate file. This way, it should be
straightforward to compare the latest results to that of previous
test runs, even if the set of test cases changes. If SASL is running,
its logs will also be printed to the current minor log file by the
<seealso marker="common_test:ct_hooks_chapter#builtin_cths">
cth_log_redirect built-in hook</seealso>.
</p>
<p>The full name of the minor log file (i.e. the name of the file
including the absolute directory path) can be read during execution
of the test case. It comes as value in the tuple
<c>{tc_logfile,LogFileName}</c> in the <c>Config</c> list (which means it
can also be read by a pre- or post Common Test hook function). Also,
at the start of a test case, this data is sent with an event
to any installed event handler. Please see the
<seealso marker="event_handler_chapter#event_handling">Event Handling</seealso>
chapter for details.
</p>
<p>Which information goes where is user configurable via the
test server controller. Three threshold values determine what
comes out on screen, and in the major or minor log files. See
the OTP Test Server manual for information. The contents that
goes to the HTML log file is fixed however and cannot be altered.</p>
<p>The log files are written continously during a test run and links are
always created initially when a test starts. This makes it possible
to follow test progress simply by refreshing pages in the HTML browser.
Statistics totals are not presented until a test is complete however.</p>
<section>
<marker id="logopts"></marker>
<title>Log options</title>
<p>With the <c>logopts</c> start flag, it's possible to specify
options that modify some aspects of the logging behaviour.
Currently, the following options are available:</p>
<list>
<item><c>no_src</c></item>
<item><c>no_nl</c></item>
</list>
<p>With <c>no_src</c>, the html version of the test suite source
code will not be generated during the test run (and consequently
not be available in the log file system).</p>
<p>With <c>no_nl</c>, Common Test will not add a newline character
(\n) to the end of an output string that it receives from a call to e.g.
<c>io:format/2</c>, and which it prints to the test case log.</p>
<p>For example, if a test is started with:</p>
<p><c>$ ct_run -suite my_SUITE -logopts no_src</c></p>
<p>then printouts during the test made by successive calls to <c>io:format("x")</c>,
will appear in the test case log as:</p>
<p><c>xxx</c></p>
<p>instead of each <c>x</c> printed on a new line, which is the default behaviour.</p>
</section>
<section>
<marker id="table_sorting"></marker>
<title>Sorting HTML table columns</title>
<p>By clicking the name in the column header of any table (e.g. "Ok", "Case", "Time", etc),
the table rows are sorted in whatever order makes sense for the type of value (e.g.
numerical for "Ok" or "Time", and alphabetical for "Case"). The sorting is performed
by means of JavaScript code, automatically inserted into the HTML log files. Common Test
uses the <url href="http://jquery.com">jQuery</url> library and the
<url href="http://tablesorter.com">tablesorter</url> plugin, with customized sorting
functions, for this implementation.</p>
</section>
</section>
<section>
<marker id="html_stylesheet"></marker>
<title>HTML Style Sheets</title>
<p>Common Test uses an HTML Style Sheet (CSS file) to control the look of
the HTML log files generated during test runs. If, for some reason, the
log files are not displayed correctly in the browser of your
choice, or you prefer a more primitive ("pre Common Test v1.6") look
of the logs, use the start flag/option:</p>
<pre>basic_html</pre>
<p>This disables the use of Style Sheets, as well as JavaScripts (see
table sorting above).</p>
<p>Common Test includes an <em>optional</em> feature to allow
user HTML style sheets for customizing printouts. The
functions in <c>ct</c> that print to a test case HTML log
file (<c>log/3</c> and <c>pal/3</c>) accept <c>Category</c>
as first argument. With this argument it's possible to
specify a category that can be mapped to a selector in a CSS
definition. This is useful especially for coloring text
differently depending on the type of (or reason for) the
printout. Say you want one color for test system
configuration information, a different one for test system
state information and finally one for errors detected by the
test case functions. The corresponding style sheet may
look like this:</p>
<pre>
div.sys_config { background:blue; color:white }
div.sys_state { background:yellow; color:black }
div.error { background:red; color:white }</pre>
<p>To install the CSS file (Common Test inlines the definition in the
HTML code), the name may be provided when executing <c>ct_run</c>.
Example:</p>
<pre>
$ ct_run -dir $TEST/prog -stylesheet $TEST/styles/test_categories.css</pre>
<p>Categories in a CSS file installed with the <c>-stylesheet</c> flag
are on a global test level in the sense that they can be used in any
suite which is part of the test run.</p>
<p>It is also possible to install style sheets on a per suite and
per test case basis. Example:</p>
<pre>
-module(my_SUITE).
...
suite() -> [..., {stylesheet,"suite_categories.css"}, ...].
...
my_testcase(_) ->
...
ct:log(sys_config, "Test node version: ~p", [VersionInfo]),
...
ct:log(sys_state, "Connections: ~p", [ConnectionInfo]),
...
ct:pal(error, "Error ~p detected! Info: ~p", [SomeFault,ErrorInfo]),
ct:fail(SomeFault).</pre>
<p>If the style sheet is installed as in this example, the categories are
private to the suite in question. They can be used by all test cases in the
suite, but can not be used by other suites. A suite private style sheet,
if specified, will be used in favour of a global style sheet (one specified
with the <c>-stylesheet</c> flag). A stylesheet tuple (as returned by <c>suite/0</c>
above) can also be returned from a test case info function. In this case the
categories specified in the style sheet can only be used in that particular
test case. A test case private style sheet is used in favour of a suite or
global level style sheet.
</p>
<p>In a tuple <c>{stylesheet,CSSFile}</c>, if <c>CSSFile</c> is specified
with a path, e.g. <c>"$TEST/styles/categories.css"</c>, this full
name will be used to locate the file. If only the file name is specified
however, e.g. "categories.css", then the CSS file is assumed to be located
in the data directory, <c>data_dir</c>, of the suite. The latter usage is
recommended since it is portable compared to hard coding path names in the
suite!</p>
<p>The <c>Category</c> argument in the example above may have the
value (atom) <c>sys_config</c> (white on blue), <c>sys_state</c>
(black on yellow) or <c>error</c> (white on red).</p>
</section>
<section>
<marker id="repeating_tests"></marker>
<title>Repeating tests</title>
<p>You can order Common Test to repeat the tests you specify. You can choose
to repeat tests a certain number of times, repeat tests for a specific period of time,
or repeat tests until a particular stop time is reached. If repetition is controlled by
means of time, it is also possible to specify what action Common Test should
take upon timeout. Either Common Test performs all tests in the current run before stopping,
or it stops as soon as the current test job is finished. Repetition can be activated by
means of <c>ct_run</c> start flags, or tuples in the <c>ct:run:test/1</c>
option list argument. The flags (options in parenthesis) are:</p>
<list>
<item><c>-repeat N ({repeat,N})</c>, where <c>N</c> is a positive integer.</item>
<item><c>-duration DurTime ({duration,DurTime})</c>, where <c>DurTime</c> is the duration, see below.</item>
<item><c>-until StopTime ({until,StopTime})</c>, where <c>StopTime</c> is finish time, see below.</item>
<item><c>-force_stop ({force_stop,true})</c></item>
</list>
<p>The duration time, <c>DurTime</c>, is specified as <c>HHMMSS</c>. Example:
<c>-duration 012030</c> or <c>{duration,"012030"}</c>, means the tests will
be executed and (if time allows) repeated, until timeout occurs after 1 h, 20 min
and 30 secs.
<c>StopTime</c> can be specified as <c>HHMMSS</c> and is then interpreted as a time today
(or possibly tomorrow). <c>StopTime</c> can also be specified as <c>YYMoMoDDHHMMSS</c>.
Example: <c>-until 071001120000</c> or <c>{until,"071001120000"}</c>, which means the tests
will be executed and (if time allows) repeated, until 12 o'clock on the 1st of Oct 2007.</p>
<p>When timeout occurs, Common Test will never abort the test run immediately, since
this might leave the system under test in an undefined, and possibly bad, state.
Instead Common Test will finish the current test job, or the complete test
run, before stopping. The latter is the default behaviour. The <c>force_stop</c>
flag/option tells Common Test to stop as soon as the current test job is finished.
Note that since Common Test always finishes off the current test job or test session,
the time specified with <c>duration</c> or <c>until</c> is never definitive!</p>
<p>Log files from every single repeated test run is saved in normal Common Test fashion (see above).
Common Test may later support an optional feature to only store the last (and possibly
the first) set of logs of repeated test runs, but for now the user must be careful not
to run out of disk space if tests are repeated during long periods of time.</p>
<p>Note that for each test run that is part of a repeated session, information about the
particular test run is printed in the Common Test Framework Log. There you can read
the repetition number, remaining time, etc.</p>
<p>Example 1:</p>
<pre>
$ ct_run -dir $TEST_ROOT/to1 $TEST_ROOT/to2 -duration 001000 -force_stop</pre>
<p>Here the suites in test directory to1, followed by the suites in to2, will be executed
in one test run. A timeout event will occur after 10 minutes. As long as there is time
left, Common Test will repeat the test run (i.e. starting over with the to1 test).
When the timeout occurs, Common Test will stop as soon as the current job is finished
(because of the <c>force_stop</c> flag). As a result, the specified test run might be
aborted after the to1 test and before the to2 test.</p>
<p>Example 2:</p>
<pre>
$ date
Fri Sep 28 15:00:00 MEST 2007
$ ct_run -dir $TEST_ROOT/to1 $TEST_ROOT/to2 -until 160000</pre>
<p>Here the same test run as in the example above will be executed (and possibly repeated).
In this example, however, the timeout will occur after 1 hour and when that happens,
Common Test will finish the entire test run before stopping (i.e. the to1 and to2 test
will always both be executed in the same test run).</p>
<p>Example 3:</p>
<pre>
$ ct_run -dir $TEST_ROOT/to1 $TEST_ROOT/to2 -repeat 5</pre>
<p>Here the test run, including both the to1 and the to2 test, will be repeated 5 times.</p>
<note><p>This feature should not be confused with the <c>repeat</c> property of a test
case group. The options described here are used to repeat execution of entire test runs,
while the <c>repeat</c> property of a test case group makes it possible to repeat
execution of sets of test cases within a suite. For more information about the latter,
see the <seealso marker="write_test_chapter#test_case_groups">Writing Test Suites</seealso>
chapter.</p></note>
</section>
<section>
<marker id="silent_connections"></marker>
<title>Silent Connections</title>
<p>The protocol handling processes in Common Test, implemented by ct_telnet,
ct_ssh, ct_ftp etc, do verbose printing to the test case logs. This can be switched off
by means of the <c>-silent_connections</c> flag:</p>
<pre>
ct_run -silent_connections [conn_types]
</pre>
<p>where <c>conn_types</c> specifies <c>ssh, telnet, ftp, rpc</c> and/or <c>snmp</c>.</p>
<p>Example:</p>
<pre>
ct_run ... -silent_connections ssh telnet</pre>
<p>switches off logging for ssh and telnet connections.</p>
<pre>
ct_run ... -silent_connections</pre>
<p>switches off logging for all connection types.</p>
<p>Fatal communication error and reconnection attempts will always be printed even
if logging has been suppressed for the connection type in question. However, operations
such as sending and receiving data will be performed silently.</p>
<p>It is possible to also specify <c>silent_connections</c> in a test suite. This is
accomplished by returning a tuple, <c>{silent_connections,ConnTypes}</c>, in the
<c>suite/0</c> or test case info list. If <c>ConnTypes</c> is a list of atoms
(<c>ssh, telnet, ftp, rpc</c> and/or <c>snmp</c>), output for any corresponding connections
will be suppressed. Full logging is per default enabled for any connection of type not
specified in <c>ConnTypes</c>. Hence, if <c>ConnTypes</c> is the empty list, logging
is enabled for all connections.</p>
<p>Example:</p>
<pre>
-module(my_SUITE).
suite() -> [..., {silent_connections,[telnet,ssh]}, ...].
...
my_testcase1() ->
[{silent_connections,[ssh]}].
my_testcase1(_) ->
...
my_testcase2(_) ->
...
</pre>
<p>In this example, <c>suite/0</c> tells Common Test to suppress
printouts from telnet and ssh connections. This is valid for
all test cases. However, <c>my_testcase1/0</c> specifies that
for this test case, only ssh should be silent. The result is
that <c>my_testcase1</c> will get telnet info (if any) printed
in the log, but not ssh info. <c>my_testcase2</c> will get no
info from either connection printed.</p>
<p><c>silent_connections</c> may also be specified with a term
in a test specification
(see <seealso marker="run_test_chapter#test_specifications">Test
Specifications</seealso>). Connections provided with the
<c>silent_connections</c> start flag/option, will be merged with
any connections listed in the test specification.</p>
<p>The <c>silent_connections</c> start flag/option and test
specification term, overrides any settings made by the info functions
inside the test suite.</p>
<note><p>Note that in the current Common Test version, the
<c>silent_connections</c> feature only works for telnet
and ssh connections! Support for other connection types will be added
in future Common Test versions.</p></note>
</section>
</chapter>
