path: root/lib/crypto/doc/src/crypto.xml

<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>1999</year><year>2018</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
    </legalnotice>

    <title>crypto</title>
  </header>
  <module since="">crypto</module>
  <modulesummary>Crypto Functions</modulesummary>
  <description>
    <p>This module provides a set of cryptographic functions.
      </p>
      <taglist>
	<tag>Hash functions</tag>
	<item>
	  <p></p>
	  <taglist>
	    <tag>SHA1, SHA2</tag>
	    <item>
	      <url href="https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.180-4.pdf">
		Secure Hash Standard [FIPS PUB 180-4]
	      </url>
	    </item>
	    <tag>SHA3</tag>
	      <item>
		<url href="https://www.nist.gov/publications/sha-3-standard-permutation-based-hash-and-extendable-output-functions?pub_id=919061">
		  SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions [FIPS PUB 202]
		</url>		
	      </item>
            <tag>BLAKE2</tag>
              <item>
                <url href="https://blake2.net/">BLAKE2 — fast secure hashing</url>
              </item>
	    <tag>MD5</tag>
	    <item>
	      <url href="http://www.ietf.org/rfc/rfc1321.txt">The MD5 Message Digest Algorithm [RFC 1321]</url>
	    </item>
	    <tag>MD4</tag>
	    <item>
	      <url href="http://www.ietf.org/rfc/rfc1320.txt">The MD4 Message Digest Algorithm [RFC 1320]</url>
	    </item>
	  </taglist>
	  <p></p>
	</item>

	<tag>MACs - Message Authentication Codes</tag>
	<item>
	  <p></p>
	  <taglist>
	    <tag>Hmac functions</tag>
	    <item>
              <url href="http://www.ietf.org/rfc/rfc2104.txt">
		Keyed-Hashing for Message Authentication [RFC 2104]
	      </url>
	    </item>
	    <tag>Cmac functions</tag>
	    <item>
              <url href="http://www.ietf.org/rfc/rfc4493.txt">
		The AES-CMAC Algorithm [RFC 4493]
	      </url>
	    </item>
	    <tag>POLY1305</tag>
	    <item>
	      <url href="http://www.ietf.org/rfc/rfc7539.txt">
		ChaCha20 and Poly1305 for IETF Protocols [RFC 7539]
	      </url>
	    </item>
	  </taglist>
	  <p></p>
	</item>

	<tag>Symmetric Ciphers</tag>
	<item>
	  <p></p>
	  <taglist>
            <tag>DES, 3DES and AES</tag>
	    <item>
	      <url href="https://csrc.nist.gov/projects/block-cipher-techniques">Block Cipher Techniques [NIST]</url>
	    </item>
	    <tag>Blowfish</tag>
	    <item>
	      <url href="https://www.schneier.com/academic/archives/1994/09/description_of_a_new.html">
		Fast Software Encryption, Cambridge Security Workshop Proceedings (December 1993), Springer-Verlag, 1994, pp. 191-204.
	      </url>
	    </item>
	    <tag>Chacha20</tag>
	    <item>
	      <url href="http://www.ietf.org/rfc/rfc7539.txt">
		ChaCha20 and Poly1305 for IETF Protocols [RFC 7539]
	      </url>
	    </item>
	    <tag>Chacha20_poly1305</tag>
	    <item>
	      <url href="http://www.ietf.org/rfc/rfc7539.txt">
		ChaCha20 and Poly1305 for IETF Protocols [RFC 7539]
	      </url>
	    </item>
	  </taglist>
	  <p></p>
	</item>

	<tag>Modes</tag>
	<item>
	  <p></p>
	  <taglist>
	    <tag>ECB, CBC, CFB, OFB and CTR</tag>
	    <item>
	      <url href="https://csrc.nist.gov/publications/detail/sp/800-38a/final">
		Recommendation for Block Cipher Modes of Operation: Methods and Techniques [NIST SP 800-38A]
	      </url>
	    </item>
	    <tag>GCM</tag>
	    <item>
              <url href="https://csrc.nist.gov/publications/detail/sp/800-38d/final">
		Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC [NIST SP 800-38D]
	      </url>
	    </item>
	    <tag>CCM</tag>
	    <item>
	      <url href="https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38c.pdf">
		Recommendation for Block Cipher Modes of Operation:
		The CCM Mode for Authentication and Confidentiality [NIST SP 800-38C]
	      </url>
	    </item>
	  </taglist>
	  <p></p>
	</item>

	<tag>Asymetric Ciphers - Public Key Techniques</tag>
	<item>
	  <p></p>
	  <taglist>
	    <tag>RSA</tag>
	    <item>
              <url href="http://www.ietf.org/rfc/rfc3447.txt">
		PKCS #1: RSA Cryptography Specifications [RFC 3447]
	      </url>
	    </item>
	    <tag>DSS</tag>
	    <item>
	      <url href="https://csrc.nist.gov/publications/detail/fips/186/4/final">
		Digital Signature Standard (DSS) [FIPS 186-4]
	      </url>
	    </item>
	    <tag>ECDSA</tag>
	    <item>
	      <url href="http://csrc.nist.gov/groups/STM/cavp/documents/dss2/ecdsa2vs.pdf">
		Elliptic Curve Digital Signature Algorithm [ECDSA]
	      </url>
	    </item>
	    <tag>SRP</tag>
	    <item>
              <url href="http://www.ietf.org/rfc/rfc2945.txt">
		The SRP Authentication and Key Exchange System [RFC 2945]
	      </url>
	    </item>
	  </taglist>
	  <p></p>
	</item>
      </taglist>

    <note>
      <p>The actual supported algorithms and features depends on their availability in the actual libcrypto used.
      See the <seealso marker="crypto:crypto_app">crypto (App)</seealso> about dependencies.
      </p>
      <p>Enabling FIPS mode will also disable algorithms and features.
      </p>
    </note>

    <p>The <seealso marker="users_guide">CRYPTO User's Guide</seealso> has more information on
    FIPS, Engines and Algorithm Details like key lengths.
    </p>
  </description>

  <datatypes>
    <datatype_title>Ciphers, new API</datatype_title>
    <datatype>
      <name name="cipher"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="cipher_no_iv"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="cipher_iv"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="cipher_aead"/>
      <desc>
	<p>Ciphers known by the CRYPTO application when using the
	<seealso marker="crypto:new_api#the-new-api">new API</seealso>.</p>
	<p>Note that this list might be reduced if the underlying libcrypto does not support all of them.</p>
      </desc>
    </datatype>

    <datatype_title>Ciphers, old API</datatype_title>
    <datatype>
      <name name="block_cipher_with_iv"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="block_cipher_without_iv"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="stream_cipher"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="aead_cipher"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="cbc_cipher"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="cfb_cipher"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="ctr_cipher"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="ecb_cipher"/>
      <desc>
	<p>Ciphers known by the CRYPTO application when using the
	<seealso marker="crypto:new_api#the-old-api">old API</seealso>.</p>
	<p>Note that this list might be reduced if the underlying libcrypto does not support all of them.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="retired_cbc_cipher_aliases"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="retired_cfb_cipher_aliases"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="retired_ctr_cipher_aliases"/>
      <desc>
      </desc>
    </datatype>
    <datatype>
      <name name="retired_ecb_cipher_aliases"/>
      <desc>
	<p>Alternative, old names of ciphers known by the CRYPTO application when using the
	<seealso marker="crypto:new_api#the-old-api">old API</seealso>.
	See <seealso marker="crypto:new_api#retired-cipher-names">Retired cipher names</seealso> for names to
	use instead to be prepared for an easy convertion to the
	<seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	</p>
	<p>Note that this list might be reduced if the underlying libcrypto does not support all of them.</p>
      </desc>
    </datatype>

    <datatype_title>Digests and hash</datatype_title>
    <datatype>
      <name name="hash_algorithm"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="hmac_hash_algorithm"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="rsa_digest_type"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="dss_digest_type"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="ecdsa_digest_type"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="sha1"/>
      <name name="sha2"/>
      <name name="sha3"/>
      <name name="blake2"/>
      <name name="compatibility_only_hash"/>
      <desc>
	<p>The <c>compatibility_only_hash()</c> algorithms are recommended only for compatibility with existing applications.</p>
      </desc>
    </datatype>

    <datatype_title>Elliptic Curves</datatype_title>
    <datatype>
      <name name="ec_named_curve"/>
      <name name="edwards_curve_dh"/>
      <name name="edwards_curve_ed"/>
      <desc>
	<p>Note that some curves are disabled if FIPS is enabled.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="ec_explicit_curve"/>
      <name name="ec_field"/>
      <name name="ec_curve"/>
      <desc>
	<p>Parametric curve definition.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="ec_prime_field"/>
      <name name="ec_characteristic_two_field"/>
      <name name="ec_basis"/>
      <desc>
	<p>Curve definition details.</p>
      </desc>
    </datatype>

    <datatype_title>Keys</datatype_title>
    <datatype>
      <name name="key"/>
      <name name="des3_key"/>
      <desc>
	<p>For keylengths, iv-sizes and blocksizes see the
	<seealso marker="crypto:algorithm_details#ciphers">User's Guide</seealso>.
	</p>
	<p>A key for des3 is a list of three iolists</p>
      </desc>
    </datatype>

    <datatype>
      <name name="key_integer"/>
      <desc>
	<p>Always <c>binary()</c> when used as return value</p>
      </desc>
    </datatype>

    <datatype_title>Public/Private Keys</datatype_title>
    <datatype>
      <name name="rsa_public"/>
      <name name="rsa_private"/>
      <name name="rsa_params"/>
      <desc>
	<code>rsa_public() = [E, N]</code>
	<code>rsa_private() = [E, N, D] | [E, N, D, P1, P2, E1, E2, C]</code>
	<p>Where E is the public exponent, N is public modulus and D is
	the private exponent. The longer key format contains redundant
	information that will make the calculation faster. P1,P2 are first
	and second prime factors. E1,E2 are first and second exponents. C
	is the CRT coefficient. Terminology is taken from <url href="http://www.ietf.org/rfc/rfc3477.txt"> RFC 3447</url>.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="dss_public"/>
      <name name="dss_private"/>
      <desc>
	<code>dss_public() = [P, Q, G, Y] </code>
	<p>Where P, Q and G are the dss parameters and Y is the public key.</p>

	<code>dss_private() = [P, Q, G, X] </code>
	<p>Where P, Q and G are the dss parameters and X is the private key.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="ecdsa_public"/>
      <name name="ecdsa_private"/>
      <name name="ecdsa_params"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="eddsa_public"/>
      <name name="eddsa_private"/>
      <name name="eddsa_params"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="srp_public"/>
      <name name="srp_private"/>
      <desc>
	<code>srp_public() = key_integer() </code>
	<p>Where is <c>A</c> or <c>B</c> from <url href="http://srp.stanford.edu/design.html">SRP design</url></p>
	
	<code>srp_private() = key_integer() </code>
	<p>Where is  <c>a</c> or <c>b</c> from <url href="http://srp.stanford.edu/design.html">SRP design</url></p>
      </desc>
    </datatype>

    <datatype>
      <name name="srp_gen_params"/>
      <name name="srp_comp_params"/>
      <desc>
	<marker id="type-srp_user_gen_params"/>
	<code>srp_user_gen_params() = [DerivedKey::binary(), Prime::binary(), Generator::binary(), Version::atom()]</code>
	<marker id="type-srp_host_gen_params"/>
	<code>srp_host_gen_params() = [Verifier::binary(), Prime::binary(), Version::atom() ]</code>
	<marker id="type-srp_user_comp_params"/>
	<code>srp_user_comp_params() = [DerivedKey::binary(), Prime::binary(), Generator::binary(), Version::atom() | ScramblerArg::list()]</code>
	<marker id="type-srp_host_comp_params"/>
	<code>srp_host_comp_params() = [Verifier::binary(), Prime::binary(), Version::atom() | ScramblerArg::list()]</code>
	<p>Where Verifier is <c>v</c>, Generator is <c>g</c> and Prime is<c> N</c>, DerivedKey is <c>X</c>, and Scrambler is
	<c>u</c> (optional will be generated if not provided) from <url href="http://srp.stanford.edu/design.html">SRP design</url>
	Version = '3' |  '6' |  '6a'
	</p>
      </desc>
    </datatype>

    <datatype_title>Public Key Ciphers</datatype_title>

    <datatype>
      <name name="pk_encrypt_decrypt_algs"/>
      <desc>
	<p>Algorithms for public key encrypt/decrypt. Only RSA is supported.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="pk_encrypt_decrypt_opts"/>
      <name name="rsa_opt"/>
      <name name="rsa_padding"/>
      <desc>
	<p>Options for public key encrypt/decrypt. Only RSA is supported.</p>
	 <warning>
	   <!-- In RefMan rsa_opt(), rsa_sign_verify_opt() and User's man RSA -->
	   <p>The RSA options are experimental.
	   </p>
	   <p>The exact set of options and there syntax <em>may</em> be changed
	   without prior notice.</p>
	</warning>
      </desc>
    </datatype>

    <datatype>
      <name name="rsa_compat_opts"/>
      <desc>
	<p>Those option forms are kept only for compatibility and should not be used in new code.</p>
      </desc>
    </datatype>

    <datatype_title>Public Key Sign and Verify</datatype_title>

    <datatype>
      <name name="pk_sign_verify_algs"/>
      <desc>
	<p>Algorithms for sign and verify.</p>
      </desc>
    </datatype>

    <datatype>
      <name name="pk_sign_verify_opts"/>
      <name name="rsa_sign_verify_opt"/>
      <name name="rsa_sign_verify_padding"/>
      <desc>
	<p>Options for sign and verify.</p>
	 <warning>
	   <!-- In RefMan rsa_opt(), rsa_sign_verify_opt() and User's man RSA -->
	   <p>The RSA options are experimental.
	   </p>
	   <p>The exact set of options and there syntax <em>may</em> be changed
	   without prior notice.</p>
	</warning>
      </desc>
    </datatype>

    <datatype_title>Diffie-Hellman Keys and parameters</datatype_title>
    <datatype>
      <name name="dh_public"/>
      <name name="dh_private"/>
      <desc>
      </desc>
    </datatype>

    <datatype>
      <name name="dh_params"/>
      <desc>
	<code>dh_params() = [P, G] | [P, G, PrivateKeyBitLength]</code>
      </desc>
    </datatype>

    <datatype>
      <name name="ecdh_public"/>
      <name name="ecdh_private"/>
      <name name="ecdh_params"/>
      <desc>
      </desc>
    </datatype>

    <datatype_title>Types for Engines</datatype_title>

    <datatype>
      <name name="engine_key_ref"/>
      <name name="engine_ref"/>
      <desc>
	<p>The result of a call to <seealso marker="#engine_load-3">engine_load/3</seealso>.
	</p>
      </desc>
    </datatype>

    <datatype>
      <name name="key_id"/>
      <desc>
	<p>Identifies the key to be used. The format depends on the loaded engine. It is passed to
	the <c>ENGINE_load_(private|public)_key</c> functions in libcrypto.
	</p>
      </desc>
    </datatype>

    <datatype>
      <name name="password"/>
      <desc>
	<p>The password of the key stored in an engine.
	</p>
      </desc>
    </datatype>

    <datatype>
      <name name="engine_method_type"/>
    </datatype>

    <datatype>
      <name name="engine_cmnd"/>
      <desc>
	<p>Pre and Post commands for <seealso marker="#engine_load-3">engine_load/3 and /4</seealso>.
	</p>
      </desc>
    </datatype>

    <datatype_title>Internal data types</datatype_title>

    <datatype>
      <name name="stream_state"/>
      <name name="hmac_state"/>
      <name name="hash_state"/>
      <name name="crypto_state"/>
      <desc>
	<p>Contexts with an internal state that should not be manipulated but passed between function calls.
	</p>
      </desc>
    </datatype>

    <datatype_title>Error types</datatype_title>

    <datatype>
      <name name="run_time_error"/>
      <desc>
	<p>The exception <c>error:badarg</c> signifies that one or more arguments are of wrong data type,
	or are otherwise badly formed.
	</p>
	<p>The exception <c>error:notsup</c> signifies that the algorithm is known but is not supported
	by current underlying libcrypto or explicitly disabled when building that.
	</p>
	<p>For a list of supported algorithms, see <seealso marker="#supports-0">supports/0</seealso>.
	</p>
      </desc>
    </datatype>

    <datatype>
      <name name="descriptive_error"/>
      <desc>
	<p>This is a more developed variant of the older
	<seealso marker="#type-run_time_error">run_time_error()</seealso>.
	</p>
	<p>The exception is:</p>
	<pre>
	  {Tag, {C_FileName,LineNumber}, Description}

	   Tag = badarg | notsup | error
	   C_FileName = string()
	   LineNumber = integer()
	   Description = string()
	</pre>

	<p>It is like the older type an exception of the <c>error</c> class. In addition they contain
	a descriptive text in English. That text is targeted to a developer. Examples are "Bad key size"
	or "Cipher id is not an atom".
	</p>
	<p>The exception tags are:</p>
	<taglist>
	  <tag><c>badarg</c></tag>
	  <item><p>Signifies that one or more arguments are of wrong data type or are otherwise badly formed.</p>
	  </item>

	  <tag><c>notsup</c></tag>
	  <item><p>Signifies that the algorithm is known but is not supported by current underlying libcrypto
	  or explicitly disabled when building that one.</p>
	  </item>

	  <tag><c>error</c></tag>
	  <item><p>An error condition that should not occur, for example a memory allocation failed or
	  the underlying cryptolib returned an error code, for example "Can't initialize context, step 1".
	  Thoose text usually needs searching the C-code to be understood.</p>
	  </item>
	</taglist>
	<p>To catch the exception, use for example:</p>
	<code>
	  try crypto:crypto_init(Ciph, Key, IV, true)
	  catch
	      error:{Tag, {C_FileName,LineNumber}, Description} ->
	              do_something(......)
	      .....
	  end
	</code>
      </desc>
    </datatype>

  </datatypes>

  <!--================ FUNCTIONS ================-->
  <section>
    <title>New API</title>
  </section>

  <funcs>
    <func>
      <name name="crypto_init" arity="3" since="OTP 22.0"/>
      <fsummary>Initializes a series of encryptions or decryptions</fsummary>
      <desc>
	<p>As <seealso marker="#crypto_init/4">crypto_init/4</seealso> but for ciphers without IVs.</p>
      </desc>
    </func>

    <func>
      <name name="crypto_init" arity="4" since="OTP 22.0"/>
      <fsummary>Initializes a series of encryptions or decryptions</fsummary>
      <desc>
	<p>Part of the <seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	Initializes a series of encryptions or decryptions and creates an internal state
	with a reference that is returned.
	The actual encryption or decryption is done by
	<seealso marker="crypto#crypto_update/2">crypto_update/2</seealso>.
	</p>
	<p>For encryption, set the <c>EncryptFlag</c> to <c>true</c>. For decryption, set it to <c>false</c>.
	</p>
	<p>See <seealso marker="crypto:new_api#examples-of-crypto_init-4-and-crypto_update-2">
	examples in the User's Guide.</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="crypto_update" arity="2" since="OTP 22.0"/>
      <fsummary>Do an actual crypto operation on a part of the full text</fsummary>
      <desc>
	<p>Part of the <seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	It does an actual crypto operation on a part of the full text. If the part is less
	than a number of full blocks, only the full blocks (possibly none) are encrypted 
	or decrypted and the remaining bytes are saved to the next <c>crypto_update</c> operation.
	The <c>State</c> should be created with
	<seealso marker="crypto#crypto_init/3">crypto_init/3</seealso>
	or
	<seealso marker="crypto#crypto_init/4">crypto_init/4</seealso>.
	</p>
	<p>See <seealso marker="crypto:new_api#examples-of-crypto_init-4-and-crypto_update-2">
	examples in the User's Guide.</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="crypto_dyn_iv_init" arity="3" since="OTP 22.0"/>
      <fsummary>Initializes a series of encryptions or decryptions where the IV is provided later</fsummary>
      <desc>
	<p>Part of the <seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	Initializes a series of encryptions or decryptions where the IV is provided later.
	The actual encryption or decryption is done by
	<seealso marker="crypto#crypto_dyn_iv_update/3">crypto_dyn_iv_update/3</seealso>.
	</p>
	<p>For encryption, set the <c>EncryptFlag</c> to <c>true</c>. For decryption, set it to <c>false</c>.
	</p>
      </desc>
    </func>

    <func>
      <name name="crypto_dyn_iv_update" arity="3" since="OTP 22.0"/>
      <fsummary>Do an actual crypto operation on a part of the full text and the IV is supplied for each part</fsummary>
      <desc>
	<p>Part of the <seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	Do an actual crypto operation on a part of the full text and the IV is supplied for each part.
	The <c>State</c> should be created with
	<seealso marker="crypto#crypto_dyn_iv_init/3">crypto_dyn_iv_init/3</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="crypto_one_time" arity="4" since="OTP 22.0"/>
      <fsummary>Do a complete encrypt or decrypt of the full text</fsummary>
      <desc>
	<p>As <seealso marker="#crypto_one_time/5">crypto_one_time/5</seealso> but for ciphers without IVs.</p>
      </desc>
    </func>

    <func>
      <name name="crypto_one_time" arity="5" since="OTP 22.0"/>
      <fsummary>Do a complete encrypt or decrypt of the full text</fsummary>
      <desc>
	<p>Part of the <seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	Do a complete encrypt or decrypt of the full text in the argument <c>Data</c>.
	</p>
	<p>For encryption, set the <c>EncryptFlag</c> to <c>true</c>. For decryption, set it to <c>false</c>.
	</p>
	<p>See <seealso marker="crypto:new_api#example-of-crypto_one_time-5">examples in the User's Guide.</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="crypto_one_time_aead" arity="6" since="OTP 22.0"/>
      <name name="crypto_one_time_aead" arity="7" since="OTP 22.0"/>
      <fsummary>Do a complete encrypt or decrypt with an AEAD cipher of the full text</fsummary>
      <desc>
	<p>Part of the <seealso marker="crypto:new_api#the-new-api">new API</seealso>.
	Do a complete encrypt or decrypt with an AEAD cipher of the full text.
	</p>
	<p>For encryption, set the <c>EncryptFlag</c> to <c>true</c> and set the <c>TagOrTagLength</c>
	to the wanted size of the tag, that is, the tag length.  If the default length is wanted, the
	<c>crypto_aead/6</c> form may be used.
	</p>
	<p>For decryption, set the <c>EncryptFlag</c> to <c>false</c> and put the tag to be checked
	in the argument	<c>TagOrTagLength</c>.
	</p>
	<p>See <seealso marker="crypto:new_api#example-of-crypto_one_time_aead-6">examples in the User's Guide.</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="supports" arity="1" since="OTP 22.0"/>
      <fsummary>Provide a list of available crypto algorithms.</fsummary>
      <desc>
        <p> Can be used to determine which crypto algorithms that are supported
	by the underlying libcrypto library</p>
	<p>See <seealso marker="#hash_info-1">hash_info/1</seealso> and <seealso marker="#cipher_info-1">cipher_info/1</seealso>
	for information about the hash and cipher algorithms.
	</p>
      </desc>
    </func>

  </funcs>

  <section>
    <title>API kept from previous versions</title>
  </section>

  <funcs>
    <func>
      <name name="bytes_to_integer" arity="1" since="OTP R16B01"/>
      <fsummary>Convert binary representation, of an integer, to an Erlang integer.</fsummary>
      <desc>
        <p>Convert binary representation, of an integer, to an Erlang integer.
         </p>
      </desc>
    </func>

    <func>
      <name name="compute_key" arity="4" since="OTP R16B01"/>
      <fsummary>Computes the shared secret</fsummary>
      <desc>
	<p>Computes the shared secret from the private key and the other party's public key.
	 See also <seealso marker="public_key:public_key#compute_key-2">public_key:compute_key/2</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="exor" arity="2" since=""/>
      <fsummary>XOR data</fsummary>
      <desc>
	<p>Performs bit-wise XOR (exclusive or) on the data supplied.</p>
      </desc>
    </func>


    <func>
      <name name="generate_key" arity="2" since="OTP R16B01"/>
      <name name="generate_key" arity="3" since="OTP R16B01"/>
      <fsummary>Generates a public key of type <c>Type</c></fsummary>
      <desc>
	<p>Generates a public key of type <c>Type</c>.
	See also <seealso marker="public_key:public_key#generate_key-1">public_key:generate_key/1</seealso>.
	May raise exception:
        </p>
        <list type="bulleted">
          <item><c>error:badarg</c>: an argument is of wrong type or has an illegal value,</item>
	  <item><c>error:low_entropy</c>: the random generator failed due to lack of secure "randomness",</item>
          <item><c>error:computation_failed</c>: the computation fails of another reason than <c>low_entropy</c>.</item>
        </list>
	<note>
	  <p>RSA key generation is only available if the runtime was
	  built with dirty scheduler support. Otherwise, attempting to
	  generate an RSA key will raise exception <c>error:notsup</c>.</p>
	</note>
      </desc>
    </func>

     <func>
      <name name="hash" arity="2" since="OTP R15B02"/>
      <fsummary></fsummary>
      <desc>
        <p>Computes a message digest of type <c>Type</c> from <c>Data</c>.</p>
	<p>May raise exception <c>error:notsup</c> in case the chosen <c>Type</c>
	is not supported by the underlying libcrypto implementation.</p>
      </desc>
    </func>

    <func>
      <name name="hash_init" arity="1" since="OTP R15B02"/>
      <fsummary></fsummary>
      <desc>
        <p>Initializes the context for streaming hash operations. <c>Type</c> determines
        which digest to use. The returned context should be used as argument
	to <seealso marker="#hash_update-2">hash_update</seealso>.</p>
	<p>May raise exception <c>error:notsup</c> in case the chosen <c>Type</c>
	is not supported by the underlying libcrypto implementation.</p>
      </desc>
    </func>

    <func>
      <name name="hash_update" arity="2" since="OTP R15B02"/>
      <fsummary></fsummary>
      <desc>
        <p>Updates the digest represented by <c>Context</c> using the given <c>Data</c>. <c>Context</c>
        must have been generated using <seealso marker="#hash_init-1">hash_init</seealso>
	or a previous call to this function. <c>Data</c> can be any length. <c>NewContext</c>
        must be passed into the next call to <c>hash_update</c>
	or <seealso marker="#hash_final-1">hash_final</seealso>.</p>
      </desc>
    </func>

    <func>
      <name name="hash_final" arity="1" since="OTP R15B02"/>
      <fsummary></fsummary>
      <desc>
        <p>Finalizes the hash operation referenced by <c>Context</c> returned
	from a previous call to <seealso marker="#hash_update-2">hash_update</seealso>.
	The size of <c>Digest</c> is determined by the type of hash
	function used to generate it.</p>
      </desc>
    </func>

    <func>
      <name name="hmac" arity="3" since="OTP R16B"/>
      <name name="hmac" arity="4" since="OTP R16B"/>
      <fsummary></fsummary>
      <desc>
        <p>Computes a HMAC of type <c>Type</c> from <c>Data</c> using
        <c>Key</c> as the authentication key.</p> <p><c>MacLength</c>
        will limit the size of the resultant <c>Mac</c>.</p>
      </desc>
    </func>

    <func>
      <name name="hmac_init" arity="2" since="OTP R14B03"/>
      <fsummary></fsummary>
      <desc>
        <p>Initializes the context for streaming HMAC operations. <c>Type</c> determines
        which hash function to use in the HMAC operation. <c>Key</c> is the authentication
        key. The key can be any length.</p>
      </desc>
    </func>

    <func>
      <name name="hmac_update" arity="2" since="OTP R14B03"/>
      <fsummary></fsummary>
      <desc>
        <p>Updates the HMAC represented by <c>Context</c> using the given <c>Data</c>. <c>Context</c>
        must have been generated using an HMAC init function (such as
        <seealso marker="#hmac_init-2">hmac_init</seealso>). <c>Data</c> can be any length. <c>NewContext</c>
        must be passed into the next call to <c>hmac_update</c>
	or to one of the functions <seealso marker="#hmac_final-1">hmac_final</seealso> and
	<seealso marker="#hmac_final_n-2">hmac_final_n</seealso>
	</p>
	<warning><p>Do not use a <c>Context</c> as argument in more than one
	call to	hmac_update or hmac_final. The semantics of reusing old contexts
	in any way is undefined and could even crash the VM in earlier releases.
	The reason for this limitation is a lack of support in the underlying
	libcrypto	API.</p></warning>
      </desc>
    </func>

    <func>
      <name name="hmac_final" arity="1" since="OTP R14B03"/>
      <fsummary></fsummary>
      <desc>
        <p>Finalizes the HMAC operation referenced by <c>Context</c>. The size of the resultant MAC is
        determined by the type of hash function used to generate it.</p>
      </desc>
    </func>

    <func>
      <name name="hmac_final_n" arity="2" since="OTP R14B03"/>
      <fsummary></fsummary>
      <desc>
        <p>Finalizes the HMAC operation referenced by <c>Context</c>. <c>HashLen</c> must be greater than
        zero. <c>Mac</c> will be a binary with at most <c>HashLen</c> bytes. Note that if HashLen is greater than the actual number of bytes returned from the underlying hash, the returned hash will have fewer than <c>HashLen</c> bytes.</p>
      </desc>
    </func>

    <func>
      <name name="cmac" arity="3" since="OTP 20.0"/>
      <name name="cmac" arity="4" since="OTP 20.0"/>
      <fsummary>Calculates the Cipher-based Message Authentication Code.</fsummary>
      <desc>
        <p>Computes a CMAC of type <c>Type</c> from <c>Data</c> using
        <c>Key</c> as the authentication key.</p> <p><c>MacLength</c>
        will limit the size of the resultant <c>Mac</c>.</p>
      </desc>
    </func>

    <func>
      <name name="info_fips" arity="0" since="OTP 20.0"/>
      <fsummary>Provides information about the FIPS operating status.</fsummary>
      <desc>
        <p>Provides information about the FIPS operating status of
        crypto and the underlying libcrypto library. If crypto was built
        with FIPS support this can be either <c>enabled</c> (when
        running in FIPS mode) or <c>not_enabled</c>. For other builds
        this value is always <c>not_supported</c>.
	</p>
	<p>See <seealso marker="#enable_fips_mode-1">enable_fips_mode/1</seealso> about how to enable
	FIPS mode.
	</p>
        <warning>
          <p>In FIPS mode all non-FIPS compliant algorithms are
          disabled and raise exception <c>error:notsup</c>. Check
          <seealso marker="#supports-0">supports</seealso> that in
          FIPS mode returns the restricted list of available
          algorithms.</p>
        </warning>
      </desc>
    </func>

    <func>
      <name name="enable_fips_mode" arity="1" since="OTP 21.1"/>
      <fsummary>Change FIPS mode.</fsummary>
      <desc>
        <p>Enables (<c>Enable = true</c>) or disables (<c>Enable = false</c>) FIPS mode. Returns <c>true</c> if
	the operation was successful or <c>false</c> otherwise.
	</p>
	<p>Note that to enable FIPS mode succesfully, OTP must be built with the configure option <c>--enable-fips</c>,
	and the underlying libcrypto must also support FIPS.
	</p>
	<p>See also <seealso marker="#info_fips-0">info_fips/0</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="info_lib" arity="0" since=""/>
      <fsummary>Provides information about the libraries used by crypto.</fsummary>
      <desc>
        <p>Provides the name and version of the libraries used by crypto.</p>
        <p><c>Name</c> is the name of the library. <c>VerNum</c> is
        the numeric version according to the library's own versioning
        scheme. <c>VerStr</c> contains a text variant of the version.</p>
        <pre>
> <input>info_lib().</input>
[{&lt;&lt;"OpenSSL"&gt;&gt;,269484095,&lt;&lt;"OpenSSL 1.1.0c  10 Nov 2016""&gt;&gt;}]
        </pre>
	<note><p>
	  From OTP R16 the <em>numeric version</em> represents the version of the OpenSSL
	  <em>header files</em> (<c>openssl/opensslv.h</c>) used when crypto was compiled.
	  The text variant represents the libcrypto library used at runtime.
	  In earlier OTP versions both numeric and text was taken from the library.
	</p></note>
      </desc>
    </func>

    <func>
      <name name="hash_info" arity="1" since="OTP 22.0"/>
      <fsummary>Information about supported hash algorithms.</fsummary>
      <desc>
	<p>Provides a map with information about block_size, size and possibly other properties of the
	hash algorithm in question.
	</p>
	<p>For a list of supported hash algorithms, see <seealso marker="#supports-0">supports/0</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="cipher_info" arity="1" since="OTP 22.0"/>
      <fsummary>Information about supported ciphers.</fsummary>
      <desc>
	<p>Provides a map with information about block_size, key_length, iv_length and possibly other properties of the
	cipher algorithm in question.
	</p>
        <note>
	  <p>The ciphers <c>aes_cbc</c>, <c>aes_cfb8</c>, <c>aes_cfb128</c>, <c>aes_ctr</c>,
	  <c>aes_ecb</c>, <c>aes_gcm</c> and <c>aes_ccm</c>
	  has no keylength in the <c>Type</c> as opposed to for example <c>aes_128_ctr</c>. They adapt to the length of
	  the key provided in the encrypt and decrypt function. Therefor it is impossible to return a valid keylength
	  in the map.</p>
	  <p>Always use a <c>Type</c> with an explicit key length,
	  </p>
	</note>
	<p>For a list of supported cipher algorithms, see <seealso marker="#supports-0">supports/0</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="mod_pow" arity="3" since="OTP R16B01"/>
      <fsummary>Computes the function: N^P mod M</fsummary>
      <desc>
	<p>Computes the function <c>N^P mod M</c>.</p>
      </desc>
    </func>

    <func>
      <name name="next_iv" arity="2" since="OTP R16B01"/>
      <name name="next_iv" arity="3" since="OTP R16B01"/>
      <fsummary></fsummary>
      <desc>
	<p>Returns the initialization vector to be used in the next
	iteration of encrypt/decrypt of type <c>Type</c>. <c>Data</c> is the
	encrypted data from the previous iteration step. The <c>IVec</c>
	argument is only needed for <c>des_cfb</c> as the vector used
	in the previous iteration step.</p>
      </desc>
    </func>

    <func>
      <name name="poly1305" arity="2" since="OTP 21.1"/>
      <fsummary></fsummary>
      <desc>
        <p>Computes a POLY1305 message authentication code (<c>Mac</c>) from <c>Data</c> using
        <c>Key</c> as the authentication key.</p>
      </desc>
    </func>

    <func>
      <name name="private_decrypt" arity="4" since="OTP R16B01"/>
      <fsummary>Decrypts CipherText using the private Key.</fsummary>
      <desc>
	<p>Decrypts the <c>CipherText</c>, encrypted with
	<seealso marker="#public_encrypt-4">public_encrypt/4</seealso> (or equivalent function)
	  using the <c>PrivateKey</c>, and returns the
	  plaintext (message digest). This is a low level signature  verification operation
	used for instance by older versions of the SSL protocol.
	  See also <seealso marker="public_key:public_key#decrypt_private-2">public_key:decrypt_private/[2,3]</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="private_encrypt" arity="4" since="OTP R16B01"/>
      <fsummary>Encrypts PlainText using the private Key.</fsummary>
      <desc>
	<p>Encrypts the <c>PlainText</c> using the <c>PrivateKey</c>
	and returns the ciphertext. This is a low level signature operation
	used for instance by older versions of the SSL protocol. See
	also <seealso
	marker="public_key:public_key#encrypt_private-2">public_key:encrypt_private/[2,3]</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="public_decrypt" arity="4" since="OTP R16B01"/>
      <fsummary>Decrypts CipherText using the public Key.</fsummary>
      <desc>
	<p>Decrypts the <c>CipherText</c>, encrypted with
	<seealso marker="#private_encrypt-4">private_encrypt/4</seealso>(or equivalent function)
	  using the <c>PrivateKey</c>, and returns the
	  plaintext (message digest). This is a low level signature verification operation
	  used for instance by older versions of the SSL protocol.
	  See also <seealso marker="public_key:public_key#decrypt_public-2">public_key:decrypt_public/[2,3]</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="public_encrypt" arity="4" since="OTP R16B01"/>
      <fsummary>Encrypts PlainText using the public Key.</fsummary>
      <desc>
	<p>Encrypts the <c>PlainText</c> (message digest) using the <c>PublicKey</c>
	and returns the <c>CipherText</c>. This is a low level signature operation
	used for instance by older versions of the SSL protocol. See also <seealso
	marker="public_key:public_key#encrypt_public-2">public_key:encrypt_public/[2,3]</seealso>
	</p>
      </desc>
    </func>

    <func>
      <name name="rand_seed" arity="1" since="OTP 17.0"/>
      <fsummary>Set the seed for random bytes generation</fsummary>
      <desc>
        <p>Set the seed for PRNG to the given binary. This calls the
        RAND_seed function from openssl. Only use this if the system
        you are running on does not have enough "randomness" built in.
        Normally this is when
        <seealso marker="#strong_rand_bytes/1">strong_rand_bytes/1</seealso>
        raises <c>error:low_entropy</c></p>
      </desc>
    </func>

     <func>
      <name since="">rand_uniform(Lo, Hi) -> N</name>
      <fsummary>Generate a random number</fsummary>
      <type>
        <v>Lo, Hi, N = integer()</v>
      </type>
      <desc>
        <p>Generate a random number <c><![CDATA[N, Lo =< N < Hi.]]></c> Uses the
	<c>crypto</c> library pseudo-random number generator.
	<c>Hi</c> must be larger than <c>Lo</c>.</p>
      </desc>
    </func>

    <func>
      <name name="start" arity="0" since=""/>
      <fsummary> Equivalent to application:start(crypto). </fsummary>
      <desc>
        <p> Equivalent to application:start(crypto).</p>
      </desc>
    </func>

    <func>
      <name name="stop" arity="0" since=""/>
      <fsummary> Equivalent to application:stop(crypto).</fsummary>
      <desc>
        <p> Equivalent to application:stop(crypto).</p>
      </desc>
    </func>

    <func>
      <name name="strong_rand_bytes" arity="1" since="OTP R14B03"/>
      <fsummary>Generate a binary of random bytes</fsummary>
      <desc>
        <p>Generates N bytes randomly uniform 0..255, and returns the
        result in a binary. Uses a cryptographically secure prng seeded and
        periodically mixed with operating system provided entropy. By default
        this is the <c>RAND_bytes</c> method from OpenSSL.</p>
	<p>May raise exception <c>error:low_entropy</c> in case the random generator
	failed due to lack of secure "randomness".</p>
      </desc>
    </func>

    <func>
      <name name="rand_seed" arity="0" since="OTP 20.0"/>
      <fsummary>Strong random number generation plugin state</fsummary>
      <desc>
	<p>
          Creates state object for
	  <seealso marker="stdlib:rand">random number generation</seealso>,
          in order to generate cryptographically strong random numbers
          (based on OpenSSL's <c>BN_rand_range</c>),
          and saves it in the process dictionary before returning it as well.
          See also
	  <seealso marker="stdlib:rand#seed-1">rand:seed/1</seealso> and
	  <seealso marker="#rand_seed_s-0">rand_seed_s/0</seealso>.
	</p>
	<p>
	  When using the state object from this function the
	  <seealso marker="stdlib:rand">rand</seealso> functions using it
	  may raise exception <c>error:low_entropy</c> in case the random generator
	  failed due to lack of secure "randomness".
	</p>
        <p><em>Example</em></p>
        <pre>
_ = crypto:rand_seed(),
_IntegerValue = rand:uniform(42), % [1; 42]
_FloatValue = rand:uniform().     % [0.0; 1.0[</pre>
      </desc>
    </func>

    <func>
      <name name="rand_seed_s" arity="0" since="OTP 20.0"/>
      <fsummary>Strong random number generation plugin state</fsummary>
      <desc>
	<p>
          Creates state object for
	  <seealso marker="stdlib:rand">random number generation</seealso>,
          in order to generate cryptographically strongly random numbers
          (based on OpenSSL's <c>BN_rand_range</c>).
          See also
	  <seealso marker="stdlib:rand#seed_s-1">rand:seed_s/1</seealso>.
	</p>
	<p>
	  When using the state object from this function the
	  <seealso marker="stdlib:rand">rand</seealso> functions using it
	  may raise exception <c>error:low_entropy</c> in case the random generator
	  failed due to lack of secure "randomness".
	</p>
	<note>
	  <p>
	    The state returned from this function cannot be used
	    to get a reproducable random sequence as from
	    the other
	    <seealso marker="stdlib:rand">rand</seealso>
	    functions,
	    since reproducability does not match cryptographically safe.
	  </p>
	  <p>
	    The only supported usage is to generate one distinct
	    random sequence from this start state.
	  </p>
	</note>
      </desc>
    </func>

    <func>
      <name since="OTP 21.0">rand_seed_alg(Alg) -> rand:state()</name>
      <fsummary>Strong random number generation plugin state</fsummary>
      <type>
        <v>Alg = crypto | crypto_cache</v>
      </type>
      <desc>
	<marker id="rand_seed_alg-1" />
	<p>
          Creates state object for
	  <seealso marker="stdlib:rand">random number generation</seealso>,
          in order to generate cryptographically strong random numbers,
          and saves it in the process dictionary before returning it as well.
          See also
	  <seealso marker="stdlib:rand#seed-1">rand:seed/1</seealso> and
	  <seealso marker="#rand_seed_alg_s-1">rand_seed_alg_s/1</seealso>.
	</p>
	<p>
	  When using the state object from this function the
	  <seealso marker="stdlib:rand">rand</seealso> functions using it
	  may raise exception <c>error:low_entropy</c> in case the random generator
	  failed due to lack of secure "randomness".
	</p>
        <p><em>Example</em></p>
        <pre>
_ = crypto:rand_seed_alg(crypto_cache),
_IntegerValue = rand:uniform(42), % [1; 42]
_FloatValue = rand:uniform().     % [0.0; 1.0[</pre>
      </desc>
    </func>

    <func>
      <name since="OTP-22.0">rand_seed_alg(Alg, Seed) -> rand:state()</name>
      <fsummary>Strong random number generation plugin state</fsummary>
      <type>
        <v>Alg = crypto_aes</v>
      </type>
      <desc>
	<marker id="rand_seed_alg-2" />
	<p>
          Creates a state object for
	  <seealso marker="stdlib:rand">random number generation</seealso>,
          in order to generate cryptographically unpredictable random numbers,
          and saves it in the process dictionary before returning it as well.
          See also
	  <seealso marker="#rand_seed_alg_s-2">rand_seed_alg_s/2</seealso>.
	</p>
        <p><em>Example</em></p>
        <pre>
_ = crypto:rand_seed_alg(crypto_aes, "my seed"),
IntegerValue = rand:uniform(42), % [1; 42]
FloatValue = rand:uniform(),     % [0.0; 1.0[
_ = crypto:rand_seed_alg(crypto_aes, "my seed"),
IntegerValue = rand:uniform(42), % Same values
FloatValue = rand:uniform().     % again
	</pre>
      </desc>
    </func>

    <func>
      <name since="OTP 21.0">rand_seed_alg_s(Alg) -> rand:state()</name>
      <fsummary>Strong random number generation plugin state</fsummary>
      <type>
        <v>Alg = crypto | crypto_cache</v>
      </type>
      <desc>
	<marker id="rand_seed_alg_s-1" />
	<p>
          Creates state object for
	  <seealso marker="stdlib:rand">random number generation</seealso>,
          in order to generate cryptographically strongly random numbers.
          See also
	  <seealso marker="stdlib:rand#seed_s-1">rand:seed_s/1</seealso>.
	</p>
	<p>
	  If <c>Alg</c> is <c>crypto</c> this function behaves exactly like
	  <seealso marker="#rand_seed_s-0">rand_seed_s/0</seealso>.
	</p>
	<p>
	  If <c>Alg</c> is <c>crypto_cache</c> this function
	  fetches random data with OpenSSL's <c>RAND_bytes</c>
	  and caches it for speed using an internal word size
	  of 56 bits that makes calculations fast on 64 bit machines.
	</p>
	<p>
	  When using the state object from this function the
	  <seealso marker="stdlib:rand">rand</seealso> functions using it
	  may raise exception <c>error:low_entropy</c> in case the random generator
	  failed due to lack of secure "randomness".
	</p>
	<p>
	  The cache size can be changed from its default value using the
	  <seealso marker="crypto_app">
	    crypto app's
	  </seealso> configuration parameter <c>rand_cache_size</c>.
	</p>
	<p>
	  When using the state object from this function the
	  <seealso marker="stdlib:rand">rand</seealso> functions using it
	  may throw exception <c>low_entropy</c> in case the random generator
	  failed due to lack of secure "randomness".
	</p>
	<note>
	  <p>
	    The state returned from this function cannot be used
	    to get a reproducable random sequence as from
	    the other
	    <seealso marker="stdlib:rand">rand</seealso>
	    functions,
	    since reproducability does not match cryptographically safe.
	  </p>
	  <p>
	    In fact since random data is cached some numbers may
	    get reproduced if you try, but this is unpredictable.
	  </p>
	  <p>
	    The only supported usage is to generate one distinct
	    random sequence from this start state.
	  </p>
	</note>
      </desc>
    </func>

    <func>
      <name since="OTP 22.0">rand_seed_alg_s(Alg, Seed) -> rand:state()</name>
      <fsummary>Strong random number generation plugin state</fsummary>
      <type>
        <v>Alg = crypto_aes</v>
      </type>
      <desc>
	<marker id="rand_seed_alg_s-2" />
	<p>
          Creates a state object for
	  <seealso marker="stdlib:rand">random number generation</seealso>,
          in order to generate cryptographically unpredictable random numbers.
          See also
	  <seealso marker="#rand_seed_alg-1">rand_seed_alg/1</seealso>.
	</p>
	<p>
	  To get a long period the Xoroshiro928 generator from the
	  <seealso marker="stdlib:rand">rand</seealso>
	  module is used as a counter (with period 2^928 - 1)
	  and the generator states are scrambled through AES
	  to create 58-bit pseudo random values.
	</p>
	<p>
	  The result should be statistically completely unpredictable
	  random values, since the scrambling is cryptographically strong
	  and the period is ridiculously long.  But the generated numbers
	  are not to be regarded as cryptographically strong since
	  there is no re-keying schedule.
	</p>
	<list type="bulleted">
	  <item>
	    <p>
	      If you need cryptographically strong random numbers use
	      <seealso marker="#rand_seed_alg_s-1">rand_seed_alg_s/1</seealso>
	      with <c>Alg =:= crypto</c> or <c>Alg =:= crypto_cache</c>.
	    </p>
	  </item>
	  <item>
	    <p>
	      If you need to be able to repeat the sequence use this function.
	    </p>
	  </item>
	  <item>
	    <p>
	      If you do not need the statistical quality of this function,
	      there are faster algorithms in the
	      <seealso marker="stdlib:rand">rand</seealso>
	      module.
	    </p>
	  </item>
	</list>
	<p>
	  Thanks to the used generator the state object supports the
	  <seealso marker="stdlib:rand#jump-0"><c>rand:jump/0,1</c></seealso>
	  function with distance 2^512.
	</p>
	<p>
	  Numbers are generated in batches and cached for speed reasons.
	  The cache size can be changed from its default value using the
	  <seealso marker="crypto_app">
	    crypto app's
	  </seealso> configuration parameter <c>rand_cache_size</c>.
	</p>
      </desc>
    </func>

    <func>
      <name name="ec_curves" arity="0" since="OTP 17.0"/>
      <fsummary>Provide a list of available named elliptic curves.</fsummary>
      <desc>
        <p>Can be used to determine which named elliptic curves are supported.</p>
      </desc>
    </func>

    <func>
      <name name="ec_curve" arity="1" since="OTP 17.0"/>
      <fsummary>Get the defining parameters of a elliptic curve.</fsummary>
      <desc>
        <p>Return the defining parameters of a elliptic curve.</p>
      </desc>
    </func>

    <func>
      <name name="sign" arity="4" since="OTP R16B01"/>
      <name name="sign" arity="5" since="OTP 20.1"/>
      <fsummary> Create digital signature.</fsummary>
      <desc>
	<p>Creates a digital signature.</p>
	<p>The msg is either the binary "cleartext" data to be
	signed or it is the hashed value of "cleartext" i.e. the
	digest (plaintext).</p>
	<p>Algorithm <c>dss</c> can only be used together with digest type
	<c>sha</c>.</p>
	<p>See also <seealso marker="public_key:public_key#sign-3">public_key:sign/3</seealso>.</p>
      </desc>
    </func>

    <func>
      <name name="verify" arity="5" since="OTP R16B01"/>
      <name name="verify" arity="6" since="OTP 20.1"/>
      <fsummary>Verifies a digital signature.</fsummary>
      <desc>
	<p>Verifies a digital signature</p>
	<p>The msg is either the binary "cleartext" data to be
	signed or it is the hashed value of "cleartext" i.e. the
	digest (plaintext).</p>
	<p>Algorithm <c>dss</c> can only be used together with digest type
	<c>sha</c>.</p>

	<p>See also <seealso marker="public_key:public_key#verify-4">public_key:verify/4</seealso>.</p>
      </desc>
    </func>

  </funcs>
    <section>
      <title>Engine API</title>
    </section>

  <funcs>
    <!-- Engine functions -->
    <func>
      <name name="privkey_to_pubkey" arity="2" since="OTP 20.2"/>
      <fsummary>Fetches a public key from an Engine stored private key.</fsummary>
      <desc>
	<p>Fetches the corresponding public key from a private key stored in an Engine.
	The key must be of the type indicated by the Type parameter.
	</p>	
      </desc>
    </func>

    <func>
      <name name="engine_get_all_methods" arity="0" since="OTP 20.2"/>
      <fsummary>Return list of all possible engine methods</fsummary>
      <desc>
	<p>
	  Returns a list of all possible engine methods.
	</p>
	<p>
	  May raise exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_load" arity="3" since="OTP 20.2"/>
      <fsummary>Dynamical load an encryption engine</fsummary>
      <desc>
	<p>
	  Loads the OpenSSL engine given by <c>EngineId</c> if it is available and then returns ok and
	  an engine handle. This function is the same as calling <c>engine_load/4</c> with
	  <c>EngineMethods</c> set to a list of all the possible methods.  An error tuple is
	  returned if the engine can't be loaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_load" arity="4" since="OTP 20.2"/>
      <fsummary>Dynamical load an encryption engine</fsummary>
      <desc>
	<p>
	  Loads the OpenSSL engine given by <c>EngineId</c> if it is available and then returns ok and
	  an engine handle. An error tuple is returned if the engine can't be loaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_unload" arity="1" since="OTP 20.2"/>
      <fsummary>Dynamical load an encryption engine</fsummary>
      <desc>
	<p>
	  Unloads the OpenSSL engine given by <c>Engine</c>.
	  An error tuple is returned if the engine can't be unloaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameter is in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_by_id" arity="1" since="OTP 21.0.6"/>
      <fsummary>Get a reference to an already loaded engine</fsummary>
      <desc>
	<p>
	  Get a reference to an already loaded engine with <c>EngineId</c>.
	  An error tuple is returned if the engine can't be unloaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameter is in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_ctrl_cmd_string" arity="3" since="OTP 20.2"/>
      <fsummary>Sends ctrl commands to an OpenSSL engine</fsummary>
      <desc>
	<p>
	  Sends ctrl commands to the OpenSSL engine given by <c>Engine</c>.
	  This function is the same as calling <c>engine_ctrl_cmd_string/4</c> with
	  <c>Optional</c> set to <c>false</c>.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_ctrl_cmd_string" arity="4" since="OTP 20.2"/>
      <fsummary>Sends ctrl commands to an OpenSSL engine</fsummary>
      <desc>
	<p>
	  Sends ctrl commands to the OpenSSL engine given by <c>Engine</c>.
	  <c>Optional</c> is a boolean argument that can relax the semantics of the function.
	  If set to <c>true</c> it will only return failure if the ENGINE supported the given
	  command name but failed while executing it, if the ENGINE doesn't support the command
	  name it will simply return success without doing anything. In this case we assume
	  the user is only supplying commands specific to the given ENGINE so we set this to
	  <c>false</c>.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_add" arity="1" since="OTP 21.0.6"/>
      <fsummary>Add engine to OpenSSL internal list</fsummary>
      <desc>
	<p>Add the engine to OpenSSL's internal list.</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_remove" arity="1" since="OTP 21.0.6"/>
      <fsummary>Remove engine to OpenSSL internal list</fsummary>
      <desc>
	<p>Remove the engine from OpenSSL's internal list.</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_get_id" arity="1" since="OTP 21.0.6"/>
      <fsummary>Fetch engine ID</fsummary>
      <desc>
	<p>Return the ID for the engine, or an empty binary if there is no id set.</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_get_name" arity="1" since="OTP 21.0.6"/>
      <fsummary>Fetch engine name</fsummary>
      <desc>
	<p>Return the name (eg a description) for the engine, or an empty binary if there is no name set.</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="engine_list" arity="0" since="OTP 20.2"/>
      <fsummary>List the known engine ids</fsummary>
      <desc>
	<p>List the id's of all engines in OpenSSL's internal list.</p>
	<p>
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
	<p>
	  May raise exception <c>error:notsup</c> in case engine functionality is not supported by the underlying
	  OpenSSL implementation.
	</p>
      </desc>
    </func>

    <func>
      <name name="ensure_engine_loaded" arity="2" since="OTP 21.0.6"/>
      <fsummary>Ensure encryption engine just loaded once</fsummary>
      <desc>
	<p>
	  Loads the OpenSSL engine given by <c>EngineId</c> and the path to the dynamic library
	  implementing the engine. This function is the same as calling <c>ensure_engine_loaded/3</c> with
	  <c>EngineMethods</c> set to a list of all the possible methods. An error tuple is
	  returned if the engine can't be loaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="ensure_engine_loaded" arity="3" since="OTP 21.0.6"/>
      <fsummary>Ensure encryption engine just loaded once</fsummary>
      <desc>
	<p>
	  Loads the OpenSSL engine given by <c>EngineId</c> and the path to the dynamic library
	  implementing the engine. This function differs from the normal engine_load in that sense it
	  also add the engine id to the internal list in OpenSSL. Then in the following calls to the function
	  it just fetch the reference to the engine instead of loading it again.
	  An error tuple is returned if the engine can't be loaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="ensure_engine_unloaded" arity="1" since="OTP 21.0.6"/>
      <fsummary>Unload an engine loaded with the ensure function</fsummary>
      <desc>
	<p>
	  Unloads an engine loaded with the <c>ensure_engine_loaded</c> function.
	  It both removes the label from the OpenSSL internal engine list and unloads the engine.
	  This function is the same as calling <c>ensure_engine_unloaded/2</c> with
	  <c>EngineMethods</c> set to a list of all the possible methods. An error tuple is
	  returned if the engine can't be unloaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

    <func>
      <name name="ensure_engine_unloaded" arity="2" since="OTP 21.0.6"/>
      <fsummary>Unload an engine loaded with the ensure function</fsummary>
      <desc>
	<p>
	  Unloads an engine loaded with the <c>ensure_engine_loaded</c> function.
	  It both removes the label from the OpenSSL internal engine list and unloads the engine.
	  An error tuple is returned if the engine can't be unloaded.
	</p>
	<p>
	  The function raises a <c>error:badarg</c> if the parameters are in wrong format.
	  It may also raise the exception <c>error:notsup</c> in case there is
	  no engine support in the underlying OpenSSL implementation.
	</p>
	<p>
	  See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso>
	  in the User's Guide.
	</p>
      </desc>
    </func>

 </funcs>

<section>
  <title>Old API</title>
</section>

 <funcs>
    <func>
      <name name="block_encrypt" arity="3" since="OTP 18.0"/>
      <fsummary>Encrypt <c>PlainText</c> according to <c>Type</c> block cipher</fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the-new-api</seealso>.</p></dont>
	<p>Encrypt <c>PlainText</c> according to <c>Type</c> block cipher.</p>
	<p>May raise exception <c>error:notsup</c> in case the chosen <c>Type</c>
	is not supported by the underlying libcrypto implementation.</p>
	<p>For keylengths and blocksizes see the
	<seealso marker="crypto:algorithm_details#ciphers">User's Guide</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="block_decrypt" arity="3" since="OTP 18.0"/>
      <fsummary>Decrypt <c>CipherText</c> according to <c>Type</c> block cipher</fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
        <p>Decrypt <c>CipherText</c> according to <c>Type</c> block cipher.</p>
	<p>May raise exception <c>error:notsup</c> in case the chosen <c>Type</c>
	is not supported by the underlying libcrypto implementation.</p>
	<p>For keylengths and blocksizes see the
	<seealso marker="crypto:algorithm_details#ciphers">User's Guide</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name since="OTP R16B01">block_encrypt(Type, Key, Ivec, PlainText) -> CipherText | Error</name>
      <name since="OTP R16B01">block_encrypt(AeadType, Key, Ivec, {AAD, PlainText}) -> {CipherText, CipherTag} | Error</name>
      <name since="OTP R16B01">block_encrypt(aes_gcm | aes_ccm, Key, Ivec, {AAD, PlainText, TagLength}) -> {CipherText, CipherTag} | Error </name>
      <fsummary>Encrypt <c>PlainText</c> according to <c>Type</c> block cipher</fsummary>
      <type>
	<v>Type = <seealso marker="#type-block_cipher_with_iv">block_cipher_with_iv()</seealso></v>
	<v>AeadType = <seealso marker="#type-aead_cipher">aead_cipher()</seealso></v>
	<v>Key = <seealso marker="#type-key">key()</seealso> | <seealso marker="#type-des3_key">des3_key()</seealso></v>
        <v>PlainText = iodata()</v>
        <v>AAD = IVec = CipherText = CipherTag = binary()</v>
        <v>TagLength = 1..16</v>
	<v>Error = <seealso marker="#type-run_time_error">run_time_error()</seealso></v>
      </type>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
        <p>Encrypt <c>PlainText</c> according to <c>Type</c> block cipher.
	<c>IVec</c> is an arbitrary initializing vector.</p>
	<p>In AEAD (Authenticated Encryption with Associated Data) mode, encrypt
	<c>PlainText</c>according to <c>Type</c> block cipher and calculate
	<c>CipherTag</c> that also authenticates the <c>AAD</c> (Associated Authenticated Data).</p>
	<p>May raise exception <c>error:notsup</c> in case the chosen <c>Type</c>
	is not supported by the underlying libcrypto implementation.</p>
	<p>For keylengths, iv-sizes and blocksizes see the
	<seealso marker="crypto:algorithm_details#ciphers">User's Guide</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name since="OTP R16B01">block_decrypt(Type, Key, Ivec, CipherText) -> PlainText | Error</name>
      <name since="OTP R16B01">block_decrypt(AeadType, Key, Ivec, {AAD, CipherText, CipherTag}) -> PlainText | Error</name>
      <fsummary>Decrypt <c>CipherText</c> according to <c>Type</c> block cipher</fsummary>
      <type>
	<v>Type = <seealso marker="#type-block_cipher_with_iv">block_cipher_with_iv()</seealso></v>
	<v>AeadType = <seealso marker="#type-aead_cipher">aead_cipher()</seealso></v>
	<v>Key = <seealso marker="#type-key">key()</seealso> | <seealso marker="#type-des3_key">des3_key()</seealso></v>
        <v>PlainText = iodata()</v>
        <v>AAD = IVec = CipherText = CipherTag = binary()</v>
	<v>Error = BadTag | <seealso marker="#type-run_time_error">run_time_error()</seealso></v>
	<v>BadTag = error</v>
      </type>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
        <p>Decrypt <c>CipherText</c> according to <c>Type</c> block cipher.
	<c>IVec</c> is an arbitrary initializing vector.</p>
        <p>In AEAD (Authenticated Encryption with Associated Data) mode, decrypt
	<c>CipherText</c>according to <c>Type</c> block cipher and check the authenticity
	the <c>PlainText</c> and <c>AAD</c> (Associated Authenticated Data) using the
	<c>CipherTag</c>. May return <c>error</c> if the decryption or validation fail's</p>
	<p>May raise exception <c>error:notsup</c> in case the chosen <c>Type</c>
	is not supported by the underlying libcrypto implementation.</p>
	<p>For keylengths, iv-sizes and blocksizes see the
	<seealso marker="crypto:algorithm_details#ciphers">User's Guide</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="stream_init" arity="2" since="OTP R16B01"/>
      <fsummary></fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
        <p>Initializes the state for use in RC4 stream encryption
        <seealso marker="#stream_encrypt-2">stream_encrypt</seealso> and
        <seealso marker="#stream_decrypt-2">stream_decrypt</seealso></p>
	<p>For keylengths see the
	<seealso marker="crypto:algorithm_details#stream-ciphers">User's Guide</seealso>.
	</p>
      </desc>
    </func>

   <func>
      <name name="stream_init" arity="3" since="OTP R16B01"/>
      <fsummary></fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
        <p>Initializes the state for use in streaming AES encryption using Counter mode (CTR).
        <c>Key</c> is the AES key and must be either 128, 192, or 256 bits long. <c>IVec</c> is
        an arbitrary initializing vector of 128 bits (16 bytes). This state is for use with
        <seealso marker="#stream_encrypt-2">stream_encrypt</seealso> and
        <seealso marker="#stream_decrypt-2">stream_decrypt</seealso>.</p>
	<p>For keylengths and iv-sizes see the
	<seealso marker="crypto:algorithm_details#stream-ciphers">User's Guide</seealso>.
	</p>
      </desc>
    </func>

    <func>
      <name name="stream_encrypt" arity="2" since="OTP R16B01"/>
      <fsummary></fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
	<p>Encrypts <c>PlainText</c> according to the stream cipher <c>Type</c> specified in stream_init/3.
	<c>Text</c> can be any number of bytes. The initial <c>State</c> is created using
        <seealso marker="#stream_init-2">stream_init</seealso>.
	<c>NewState</c> must be passed into the next call to <c>stream_encrypt</c>.</p>
      </desc>
    </func>

    <func>
      <name name="stream_decrypt" arity="2" since="OTP R16B01"/>
      <fsummary></fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use <seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
	<p>Decrypts <c>CipherText</c> according to the stream cipher <c>Type</c> specified in stream_init/3.
	<c>PlainText</c> can be any number of bytes. The initial <c>State</c> is created using
        <seealso marker="#stream_init-2">stream_init</seealso>.
	<c>NewState</c> must be passed into the next call to <c>stream_decrypt</c>.</p>
      </desc>
    </func>

   <func>
      <name name="supports" arity="0" since="OTP R16B01"/>
      <fsummary>Provide a list of available crypto algorithms.</fsummary>
      <desc>
	<dont><p>Don't use this function for new programs! Use
	<seealso marker="crypto#supports-1">supports/1</seealso> in
	<seealso marker="crypto:new_api">the new api</seealso>.</p></dont>
        <p> Can be used to determine which crypto algorithms that are supported
	by the underlying libcrypto library</p>
	<p>See <seealso marker="#hash_info-1">hash_info/1</seealso> and <seealso marker="#cipher_info-1">cipher_info/1</seealso>
	for information about the hash and cipher algorithms.
	</p>
      </desc>
    </func>

  </funcs>


</erlref>