%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2005-2016. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%%
%%----------------------------------------------------------------------
%% Purpose: YECC grammar for text encoding of Megaco/H.248
%%----------------------------------------------------------------------
%%----------------------------------------------------------------------
%% Annex B TEXT ENCODING OF THE PROTOCOL (NORMATIVE)
%%
%% B.1 Coding of wildcards
%%
%% In a text encoding of the protocol, while TerminationIDs are
%% arbitrary, by judicious choice of names, the wildcard character, "*"
%% may be made more useful. When the wildcard character is encountered,
%% it will "match" all TerminationIDs having the same previous and
%% following characters (if appropriate). For example, if there were
%% TerminationIDs of R13/3/1, R13/3/2 and R13/3/3, the TerminationID
%% R13/3/* would match all of them. There are some circumstances where
%% ALL Terminations must be referred to. The TerminationID "*" suffices,
%% and is referred to as ALL. The CHOOSE TerminationID "$" may be used to
%% signal to the MG that it has to create an ephemeral Termination or
%% select an idle physical Termination.
%%
%% B.2 ABNF specification
%%
%% The protocol syntax is presented in ABNF according to RFC2234. The
%% protocol is not case sensitive. Identifiers are not case sensitive.
%%
%% NOTE 1 - This syntax specification does not enforce all restrictions
%% on element inclusions and values. Some additional
%% restrictions are stated in comments and other restrictions
%% appear in the text of this Recommendation. These additional
%% restrictions are part of the protocol even though not
%% enforced by this Recommendation.
%% NOTE 2 - The syntax is context-dependent. For example, "Add" can be
%% the AddToken or a NAME depending on the context in which it
%% occurs.
%%
%% Everything in the ABNF and text encoding is case insensitive. This
%% includes TerminationIDs, digitmap Ids etc. SDP is case sensitive as
%% per RFC 2327.
%%
%%----------------------------------------------------------------------
%%----------------------------------------------------------------------
%% Number of expected shift/reduce warnings
%% This is ugly but...
%%----------------------------------------------------------------------
Expect 91.
%%----------------------------------------------------------------------
%% Non-terminals
%%----------------------------------------------------------------------
Nonterminals
actionReply
actionReplyBody
actionReplyList
actionRequest
actionRequestBody
actionRequestItem
actionRequestItems
actionRequestList
alternativeValue
ammParameter
ammParameters
ammRequest
ammRequestBody
ammToken
ammsReply
ammsReplyBody
ammsToken
auditDescriptor
auditDescriptorBody
auditItem
auditItemList
auditOther
auditReply
auditRequest
auditReturnItem
auditReturnParameter
auditReturnParameterList
auditSelectLogic %% v3
authenticationHeader
commandReplyList
commandReplys %% v3
commandRequest
contextAttrDescriptor %% v3
contextAudit
contextAuditProperties
contextAuditProperty
contextAuditSelector %% v3
contextID
contextIdList %% v3
contextIDs %% v3
%% contextProperties %% v3
contextProperty
%% contextPropertyList
contextTerminationAudit
daddr
deviceName
digitMapDescriptor
direction %% v3
domainAddress
domainName
embedFirst
embedNoSig
embedSig
embedWithSig
emergencyValue %% v3
errorCode
errorDescriptor
errorText
eventBufferControl
eventBufferControlValue %% v3
eventBufferDescriptor
eventDM
eventParameter
eventParameterName
eventParameters
eventSpec
eventSpecList
eventStream
eventStreamOrOther
eventsDescriptor
extension
extensionParameter
iaServiceStates %% v3
iepsValue
%% v2 - start
indAudauditReturnParameter
indAuddigitMapDescriptor
indAudeventBufferDescriptor
indAudeventSpec
indAudeventSpecParameter
%% indAudeventSpecParameterList
indAudeventsDescriptor
indAudlocalControlDescriptor
indAudlocalParm
indAudlocalParmList
indAudmediaDescriptor
indAudmediaParm
indAudmediaParms %% v3
%% indAudmediaParmList
indAudpackagesDescriptor
indAudrequestedEvent
indAudsignalsDescriptor
indAudsignalList
%% indAudsignalListParm
indAudsignalParm
%% indAudsignalRequest
indAudstreamDescriptor
indAudstreamParm
indAudstatisticsDescriptor
indAudterminationAudit
indAudterminationAuditList
indAudterminationStateDescriptor
indAudterminationStateParm
%% indAudterminationStateParmList
optIndAudeventSpecParameter
optIndAudsignalParm
%% v2 - end
indAudcontextAttrDescriptor %% v3
localControlDescriptor
localParm
localParmList
mId
mediaDescriptor
mediaParm
mediaParmList
megacoMessage
message
messageBody
modemDescriptor % Deprecated as of Corr 1
modemType % Deprecated as of Corr 1
modemTypeList % Deprecated as of Corr 1
mtpAddress
muxDescriptor
muxType
notificationReason
notificationReasons
notifyBehaviour %% v3
notifyRegulated %% v3
notifyReply
notifyReplyBody
notifyRequest
notifyRequestBody
observedEvent
observedEventBody
observedEventParameter
observedEventParameters
% observedEventTimeStamp
observedEvents
observedEventsDescriptor
onOrOff
optAuditDescriptor
optImmAckRequired
optPropertyParms
optSep
packagesDescriptor
packagesItem
packagesItems
%% parmName
parmValue
pathName
pkgdName
portNumber
priority
propertyParm
propertyParms
propertyParmList
requestID
requestedEvent
requestedEventBody
requestedEvents
safeToken
safeToken2
secondEventParameter
secondEventParameters
secondRequestedEvent
secondRequestedEventBody
secondRequestedEvents
segmentReply %% v3
%% segmentNumber %% v3
servChgReplyParm
servChgReplyParms
serviceChangeAddress
serviceChangeDelay
serviceChangeDescriptor
serviceChangeMethod
serviceChangeMgcId
serviceChangeParm
serviceChangeParms
serviceChangeProfile
serviceChangeReason
serviceChangeReply
serviceChangeReplyBody
serviceChangeReplyDescriptor
serviceChangeRequest
serviceChangeVersion
serviceStates
serviceStatesValue %% v3
sigParameter
sigParameters
signalList
signalListId
signalListParm
signalListParms
signalName
signalParm
signalParms
signalRequest
signalsDescriptor
signalType
statisticsDescriptor
statisticsParameter
statisticsParameters
streamDescriptor
streamID
streamModes
streamParm
streamParmList
subtractRequest
termIDList %% v3
terminationAudit
terminationID
terminationIDList
terminationIDListRepeat
terminationStateDescriptor
terminationStateParm
terminationStateParms
timeStamp
topologyDescriptor
topologyDirection
topologyDescComp
topologyDescCompList
transactionAck
transactionAckList
transactionID
transactionID_and_segment_info
transactionItem
transactionList
transactionPending
transactionReply
transactionReplyBody
transactionRequest
transactionResponseAck
value
valueList
.
%%----------------------------------------------------------------------
%% Terminals
%%----------------------------------------------------------------------
Terminals
'AddToken'
'AndAUDITselectToken' %% v3
'AuditCapToken'
'AuditToken'
'AuditValueToken'
'AuthToken'
'BothToken' %% v3
'BothwayToken'
'BriefToken'
'BufferToken'
'COLON'
'COMMA'
'ContextAttrToken' %% v3
'ContextAuditToken'
'ContextListToken' %% v3
'CtxToken'
'DelayToken'
'DigitMapToken'
'DigitMapDescriptorToken'
'DirectionToken' %% v3
'DiscardToken'
'DisconnectedToken'
'DurationToken'
'EQUAL'
'EmbedToken'
'EmergencyToken'
'EmergencyOffToken'
'EmergencyValueToken' %% v3
'ErrorToken'
'EventBufferToken'
'EventsToken'
'ExternalToken' %% v3
'FailoverToken'
'ForcedToken'
'GREATER'
'GracefulToken'
'H221Token'
'H223Token'
'H226Token'
'HandOffToken'
'IEPSToken' %% v3
'ImmAckRequiredToken'
'INEQUAL' %% v3
'InSvcToken'
'InactiveToken'
'InternalToken' %% v3
'InterruptByEventToken'
'InterruptByNewSignalsDescrToken'
'IntsigDelayToken' %% v3
'IsolateToken'
'IterationToken' %% v3
'KeepActiveToken'
'LBRKT'
'LESSER'
'LSBRKT'
'LocalControlToken'
'LocalDescriptorToken'
'LockStepToken'
'LoopbackToken'
'MediaToken'
%% 'MegacopToken'
'MessageSegmentToken'
'MethodToken'
'MgcIdToken'
'ModeToken'
'ModemToken'
'ModifyToken'
'MoveToken'
'MtpAddressToken'
'MuxToken'
'NEQUAL'
'NeverNotifyToken' %% v3
'NotifyCompletionToken'
'NotifyImmediateToken' %% v3
'NotifyRegulatedToken' %% v3
'NotifyToken'
'Nx64Token' %% v2
'ObservedEventsToken'
'OffToken'
'OnToken'
'OnOffToken'
'OnewayToken'
'OnewayExternalToken' %% v3
'OnewayBothToken' %% v3
'OrAUDITselectToken' %% v3
'OtherReasonToken'
'OutOfSvcToken'
'PackagesToken'
'PendingToken'
'PriorityToken'
'ProfileToken'
'QuotedChars'
'RBRKT'
'RSBRKT'
'ReasonToken'
'RecvonlyToken'
'RemoteDescriptorToken'
'ReplyToken'
'RequestIDToken' %% v3
'ReservedGroupToken'
'ReservedValueToken'
'ResetEventsDescriptorToken' %% v3
'ResponseAckToken'
'RestartToken'
'SEP'
'SafeChars'
%% 'SegmentationCompleteToken'
'SendonlyToken'
'SendrecvToken'
'ServiceChangeAddressToken'
'ServiceChangeToken'
'ServiceChangeIncompleteToken'
'ServiceStatesToken'
'ServicesToken'
'SignalListToken'
'SignalTypeToken'
'SignalsToken'
%% 'SLASH'
'StatsToken'
'StreamToken'
'SubtractToken'
'SynchISDNToken'
'TerminationStateToken'
'TestToken'
'TimeOutToken'
'TimeStampToken'
'TopologyToken'
'TransToken'
'V18Token'
'V22Token'
'V22bisToken'
'V32Token'
'V32bisToken'
'V34Token'
'V76Token'
'V90Token'
'V91Token'
'VersionToken'
endOfMessage
.
%%----------------------------------------------------------------------
%% Root symbol
%%----------------------------------------------------------------------
Rootsymbol megacoMessage.
%%----------------------------------------------------------------------
%% The grammar
%%----------------------------------------------------------------------
%% megacoMessage = LWSP [authenticationHeader SEP ] message
%% authenticationHeader = AuthToken EQUAL SecurityParmIndex COLON
%% SequenceNum COLON AuthData
%%
%% SecurityParmIndex = "0x" 8(HEXDIG)
%% SequenceNum = "0x" 8(HEXDIG)
%% AuthData = "0x" 24*64(HEXDIG)
%% message = MegacopToken SLASH version SEP mId SEP messageBody
%% version = 1*2(DIGIT) .
megacoMessage -> optSep authenticationHeader message endOfMessage
: #'MegacoMessage'{authHeader = '$2', mess = '$3'} .
optSep -> 'SEP' : sep .
optSep -> '$empty' : no_sep .
authenticationHeader -> 'AuthToken' 'EQUAL' safeToken 'COLON'
safeToken 'COLON' safeToken optSep
: ensure_auth_header('$3', '$5', '$7') .
authenticationHeader -> '$empty' : asn1_NOVALUE .
message -> safeToken mId messageBody :
ensure_message('$1', '$2', '$3') .
messageBody -> errorDescriptor : {messageError, '$1'} .
messageBody -> transactionList : {transactions, '$1'} .
transactionList -> transactionItem : ['$1'] .
transactionList -> transactionItem transactionList : ['$1' | '$2'] .
transactionItem -> transactionRequest : {transactionRequest, '$1'} .
transactionItem -> transactionReply : {transactionReply, '$1'}.
transactionItem -> transactionPending : {transactionPending, '$1'} .
transactionItem -> transactionResponseAck : {transactionResponseAck, '$1'} .
transactionItem -> segmentReply : {segmentReply, '$1'} .
transactionResponseAck -> 'ResponseAckToken'
'LBRKT' transactionAck
transactionAckList 'RBRKT' : ['$3' | '$4'] .
transactionAckList -> 'COMMA' transactionAck
transactionAckList : ['$2' | '$3'] .
transactionAckList -> '$empty' : [] .
transactionAck -> safeToken : ensure_transactionAck('$1') .
transactionPending -> 'PendingToken' 'EQUAL' transactionID 'LBRKT' 'RBRKT' :
#'TransactionPending'{transactionId = ensure_transactionID('$3') } .
transactionRequest -> 'TransToken' 'LBRKT' actionRequest
actionRequestList 'RBRKT' :
#'TransactionRequest'{transactionId = asn1_NOVALUE,
actions = ['$3' | '$4']} .
transactionRequest -> 'TransToken' 'EQUAL' 'LBRKT' actionRequest
actionRequestList 'RBRKT' :
#'TransactionRequest'{transactionId = asn1_NOVALUE,
actions = ['$4' | '$5']} .
transactionRequest -> 'TransToken' 'EQUAL' transactionID
'LBRKT' actionRequest actionRequestList 'RBRKT' :
#'TransactionRequest'{transactionId = ensure_transactionID('$3'),
actions = ['$5' | '$6']} .
actionRequestList -> 'COMMA' actionRequest actionRequestList : ['$2' | '$3'] .
actionRequestList -> '$empty' : [] .
%% actionRequest = CtxToken EQUAL ContextID LBRKT ((contextRequest
%% [COMMA commandRequestList]) /
%% commandRequestList) RBRKT
%% contextRequest = ((contextProperties [COMMA contextAudit]) /
%% contextAudit)
%% contextProperties = contextProperty *(COMMA contextProperty)
actionRequest -> 'CtxToken' 'EQUAL' contextID
'LBRKT' actionRequestBody 'RBRKT' :
merge_action_request('$3', '$5') .
actionRequestBody -> actionRequestItem actionRequestItems : ['$1' | '$2'] .
actionRequestItems -> 'COMMA' actionRequestItem
actionRequestItems : ['$2' | '$3'] .
actionRequestItems -> '$empty' : [] .
actionRequestItem -> contextProperty : {contextProp, '$1'} .
actionRequestItem -> contextAudit : {contextAudit, '$1'} .
actionRequestItem -> commandRequest : {commandRequest, '$1'} .
%% at-most-once (presumebly in contextProperties)
contextProperty -> topologyDescriptor : {topology, '$1'}.
contextProperty -> priority : {priority, '$1'}.
contextProperty -> 'EmergencyToken' : {emergency, true}.
contextProperty -> 'EmergencyOffToken' : {emergency, false}.
contextProperty -> iepsValue : {iepsCallind, '$1'} .
contextProperty -> contextAttrDescriptor : '$1' .
contextAttrDescriptor -> 'ContextAttrToken' 'LBRKT' propertyParms 'RBRKT' :
{contextProp, '$3'}.
contextAttrDescriptor -> 'ContextAttrToken' 'LBRKT' contextIdList 'RBRKT' :
{contextList, '$3'}.
contextIdList -> 'ContextListToken' 'EQUAL'
'LBRKT' contextID contextIDs 'RBRKT' : ['$4' | '$5'] .
contextIDs -> 'COMMA' contextID contextIDs : ['$2' | '$3'] .
contextIDs -> '$empty' : [] .
contextAudit -> 'ContextAuditToken' 'LBRKT'
indAudcontextAttrDescriptor 'RBRKT' :
merge_context_attr_audit_request(
#'ContextAttrAuditRequest'{}, '$3') .
contextAudit -> 'ContextAuditToken' 'LBRKT'
contextAuditProperty contextAuditProperties 'RBRKT' :
merge_context_attr_audit_request(
#'ContextAttrAuditRequest'{}, ['$3' | '$4']) .
indAudcontextAttrDescriptor -> 'ContextAttrToken'
'LBRKT' contextAuditProperty
contextAuditProperties 'RBRKT'
: ['$3' | '$4'] .
contextAuditProperties -> 'COMMA' contextAuditProperty contextAuditProperties
: ['$2' | '$3'] .
contextAuditProperties -> '$empty' : [] .
%% at-most-once except contextAuditSelector.
contextAuditProperty -> 'TopologyToken' : topologyAudit .
contextAuditProperty -> 'EmergencyToken' : emergencyAudit .
contextAuditProperty -> 'PriorityToken' : priorityAudit .
contextAuditProperty -> 'IEPSToken' : iepsCallind .
contextAuditProperty -> pkgdName : {prop, '$1'} .
contextAuditProperty -> contextAuditSelector : '$1' .
%% at-most-once
contextAuditSelector -> priority : {select_prio, '$1'} .
contextAuditSelector -> emergencyValue : {select_emergency, '$1'} .
contextAuditSelector -> iepsValue : {select_ieps, '$1'} .
contextAuditSelector -> auditSelectLogic : {select_logic, '$1'} .
contextAuditSelector -> contextAttrDescriptor : '$1' .
auditSelectLogic -> 'AndAUDITselectToken' : {andAUDITSelect, 'NULL'} .
auditSelectLogic -> 'OrAUDITselectToken' : {orAUDITSelect, 'NULL'} .
commandRequest -> ammRequest : '$1'.
commandRequest -> subtractRequest : '$1'.
commandRequest -> auditRequest : '$1'.
commandRequest -> notifyRequest : '$1'.
commandRequest -> serviceChangeRequest : '$1'.
transactionReply -> 'ReplyToken' 'EQUAL' transactionID_and_segment_info
'LBRKT'
optImmAckRequired transactionReplyBody
'RBRKT' :
make_TransactionReply('$3', '$5', '$6') .
segmentReply -> 'MessageSegmentToken' 'EQUAL'
transactionID_and_segment_info :
make_SegmentReply('$3') .
%% segmentNumber -> safeToken : ensure_uint16('$1') .
optImmAckRequired -> 'ImmAckRequiredToken' 'COMMA' : 'NULL' .
optImmAckRequired -> '$empty' : asn1_NOVALUE .
transactionReplyBody -> errorDescriptor : {transactionError, '$1'} .
transactionReplyBody -> actionReply actionReplyList : {actionReplies, ['$1' | '$2']} .
actionReplyList -> 'COMMA' actionReply actionReplyList : ['$2' | '$3'] .
actionReplyList -> '$empty' : [] .
actionReply -> 'CtxToken' 'EQUAL' contextID
'LBRKT' actionReplyBody 'RBRKT' :
setelement(#'ActionReply'.contextId, '$5', '$3') .
actionReply -> 'CtxToken' 'EQUAL' contextID :
#'ActionReply'{contextId = '$3'} .
actionReplyBody -> errorDescriptor :
#'ActionReply'{errorDescriptor = '$1'} .
actionReplyBody -> commandReplys commandReplyList :
merge_action_reply(['$1' | '$2']) .
%% OTP-5085
%% This ugly thing is to fool the parser. The errorDescriptor does not
%% realy belong here. The merge_action_reply will remove it and put it
%% in it's right place later.
commandReplyList -> 'COMMA' errorDescriptor :
[{error, '$2'}] .
commandReplyList -> 'COMMA' commandReplys commandReplyList :
['$2' | '$3'] .
commandReplyList -> '$empty' : [] .
commandReplys -> serviceChangeReply : {command, '$1'} .
commandReplys -> auditReply : {command, '$1'} .
commandReplys -> ammsReply : {command, '$1'} .
commandReplys -> notifyReply : {command, '$1'} .
commandReplys -> contextProperty : {context, '$1'} .
%Add Move and Modify have the same request parameter
ammRequest -> ammToken 'EQUAL' termIDList ammRequestBody :
Descs = merge_AmmRequest_descriptors('$4', []),
make_commandRequest('$1',
#'AmmRequest'{terminationID = '$3',
descriptors = Descs}) .
ammToken -> 'AddToken' : {addReq, '$1'} .
ammToken -> 'MoveToken' : {moveReq, '$1'} .
ammToken -> 'ModifyToken' : {modReq, '$1'} .
ammRequestBody -> 'LBRKT' ammParameter ammParameters 'RBRKT' : ['$2' | '$3'] .
ammRequestBody -> '$empty' : [] .
ammParameters -> 'COMMA' ammParameter ammParameters : ['$2' | '$3'] .
ammParameters -> '$empty' : [] .
%at-most-once
ammParameter -> mediaDescriptor : {mediaDescriptor, '$1'}.
ammParameter -> modemDescriptor : {modemDescriptor, deprecated}.
ammParameter -> muxDescriptor : {muxDescriptor, '$1'}.
ammParameter -> eventsDescriptor : {eventsDescriptor, '$1'}.
ammParameter -> eventBufferDescriptor : {eventBufferDescriptor, '$1'}.
ammParameter -> signalsDescriptor : {signalsDescriptor, '$1'}.
ammParameter -> digitMapDescriptor : {digitMapDescriptor, '$1'}.
ammParameter -> auditDescriptor : {auditDescriptor, '$1'}.
ammParameter -> statisticsDescriptor : {statisticsDescriptor, '$1'}.
ammsReply -> ammsToken 'EQUAL' termIDList ammsReplyBody
: {'$1', #'AmmsReply'{terminationID = '$3',
terminationAudit = '$4'}} .
ammsToken -> 'AddToken' : addReply .
ammsToken -> 'MoveToken' : moveReply .
ammsToken -> 'ModifyToken' : modReply .
ammsToken -> 'SubtractToken' : subtractReply .
ammsReplyBody -> 'LBRKT' terminationAudit 'RBRKT' : '$2' .
ammsReplyBody -> '$empty' : asn1_NOVALUE .
subtractRequest -> 'SubtractToken' 'EQUAL' termIDList optAuditDescriptor :
SR = #'SubtractRequest'{terminationID = '$3',
auditDescriptor = '$4'},
make_commandRequest({subtractReq, '$1'}, SR) .
optAuditDescriptor -> 'LBRKT' auditDescriptor 'RBRKT' : '$2'.
optAuditDescriptor -> '$empty' : asn1_NOVALUE .
auditRequest -> 'AuditValueToken' 'EQUAL' termIDList optAuditDescriptor :
make_commandRequest({auditValueRequest, '$1'},
make_auditRequest('$3', '$4')) .
auditRequest -> 'AuditCapToken' 'EQUAL' termIDList optAuditDescriptor :
make_commandRequest({auditCapRequest, '$1'},
make_auditRequest('$3', '$4')) .
auditReply -> 'AuditValueToken' 'EQUAL' 'CtxToken' contextTerminationAudit :
{auditValueReply, '$4'} .
auditReply -> 'AuditCapToken' 'EQUAL' 'CtxToken' contextTerminationAudit :
{auditCapReply, '$4'} .
auditReply -> 'AuditValueToken' 'EQUAL' auditOther :
{auditValueReply, '$3'} .
auditReply -> 'AuditCapToken' 'EQUAL' auditOther :
{auditCapReply, '$3'} .
contextTerminationAudit -> terminationIDList :
{contextAuditResult, '$1'} .
contextTerminationAudit -> 'LBRKT' errorDescriptor 'RBRKT' :
{error, '$2'} .
auditOther -> termIDList :
merge_auditOther('$1', []) .
auditOther -> termIDList 'LBRKT' terminationAudit 'RBRKT' :
merge_auditOther('$1', '$3') .
terminationAudit -> auditReturnParameter auditReturnParameterList :
merge_terminationAudit(['$1' |'$2' ]) .
auditReturnParameterList -> 'COMMA' auditReturnParameter auditReturnParameterList : ['$2' | '$3'] .
auditReturnParameterList -> '$empty' : [] .
auditReturnParameter -> mediaDescriptor : {mediaDescriptor, '$1'} .
auditReturnParameter -> modemDescriptor.
auditReturnParameter -> muxDescriptor : {muxDescriptor, '$1'} .
auditReturnParameter -> eventsDescriptor : {eventsDescriptor, '$1'} .
auditReturnParameter -> signalsDescriptor : {signalsDescriptor, '$1'} .
auditReturnParameter -> digitMapDescriptor : {digitMapDescriptor, '$1'} .
auditReturnParameter -> observedEventsDescriptor : {observedEventsDescriptor, '$1'} .
auditReturnParameter -> eventBufferDescriptor : {eventBufferDescriptor, '$1'} .
auditReturnParameter -> statisticsDescriptor : {statisticsDescriptor, '$1'} .
auditReturnParameter -> packagesDescriptor : {packagesDescriptor, '$1'} .
auditReturnParameter -> errorDescriptor : {errorDescriptor, '$1'} .
auditReturnParameter -> auditReturnItem : {auditReturnItem, '$1'} .
auditDescriptor -> 'AuditToken' 'LBRKT' auditDescriptorBody 'RBRKT' :
merge_auditDescriptor('$3') .
auditDescriptorBody -> auditItem auditItemList : ['$1' | '$2'].
auditDescriptorBody -> '$empty' : asn1_NOVALUE .
auditItemList -> 'COMMA' auditItem auditItemList : ['$2' | '$3'] .
auditItemList -> '$empty' : [] .
%% IGv11 - begin
%%
auditReturnItem -> 'MuxToken' : muxToken .
auditReturnItem -> 'ModemToken' : modemToken .
auditReturnItem -> 'MediaToken' : mediaToken .
auditReturnItem -> 'DigitMapToken' : digitMapToken .
auditReturnItem -> 'StatsToken' : statsToken .
auditReturnItem -> 'ObservedEventsToken' : observedEventsToken .
auditReturnItem -> 'PackagesToken' : packagesToken .
%% at-most-once, and DigitMapToken and PackagesToken are not allowed
%% in AuditCapabilities command
auditItem -> auditReturnItem : '$1' .
auditItem -> 'SignalsToken' : signalsToken.
auditItem -> 'EventBufferToken' : eventBufferToken.
auditItem -> 'EventsToken' : eventsToken .
auditItem -> indAudterminationAudit : {terminationAudit, '$1'} . % v2
%%
%% IGv11 - end
%% v2 - start
%%
indAudterminationAudit -> indAudauditReturnParameter
indAudterminationAuditList
: ['$1' | '$2'] .
indAudterminationAuditList -> 'COMMA' indAudauditReturnParameter
indAudterminationAuditList
: ['$2' | '$3'] .
indAudterminationAuditList -> '$empty' : [] .
indAudauditReturnParameter -> indAudmediaDescriptor
: {indAudMediaDescriptor, '$1'} .
indAudauditReturnParameter -> indAudeventsDescriptor
: {indAudEventsDescriptor, '$1'} .
indAudauditReturnParameter -> indAudsignalsDescriptor
: {indAudSignalsDescriptor, '$1'} .
indAudauditReturnParameter -> indAuddigitMapDescriptor
: {indAudDigitMapDescriptor, '$1'} .
indAudauditReturnParameter -> indAudeventBufferDescriptor
: {indAudEventBufferDescriptor, '$1'} .
indAudauditReturnParameter -> indAudstatisticsDescriptor
: {indAudStatisticsDescriptor, '$1'} .
indAudauditReturnParameter -> indAudpackagesDescriptor
: {indAudPackagesDescriptor, '$1'} .
indAudmediaDescriptor -> 'MediaToken' 'LBRKT'
indAudmediaParm indAudmediaParms 'RBRKT'
: merge_indAudMediaDescriptor(['$3'|'$4']) .
%% at-most-once per item
%% and either streamParm or streamDescriptor but not both
%%
indAudmediaParm -> indAudstreamParm : {streamParm, '$1'} .
indAudmediaParm -> indAudstreamDescriptor : {streamDescr, '$1'} .
indAudmediaParm -> indAudterminationStateDescriptor : {termStateDescr, '$1'} .
indAudmediaParms -> 'COMMA' indAudmediaParm indAudmediaParms : ['$2' | '$3'] .
indAudmediaParms -> '$empty' : [] .
%% at-most-once
indAudstreamParm -> 'RemoteDescriptorToken' :
RD = ensure_prop_groups('$1'),
#'IndAudStreamParms'{remoteDescriptor = RD} .
indAudstreamParm -> 'LocalDescriptorToken' :
LD = ensure_prop_groups('$1'),
#'IndAudStreamParms'{localDescriptor = LD} .
indAudstreamParm -> indAudlocalControlDescriptor :
#'IndAudStreamParms'{localControlDescriptor = '$1'} .
indAudstreamParm -> indAudstatisticsDescriptor :
#'IndAudStreamParms'{statisticsDescriptor = '$1'} .
indAudstreamDescriptor -> 'StreamToken' 'EQUAL' streamID
'LBRKT' indAudstreamParm 'RBRKT'
: #'IndAudStreamDescriptor'{streamID = '$3',
streamParms = '$5'} .
indAudlocalControlDescriptor -> 'LocalControlToken'
'LBRKT' indAudlocalParm
indAudlocalParmList 'RBRKT' :
merge_indAudLocalControlDescriptor(['$3' | '$4']) .
indAudlocalParmList -> 'COMMA' indAudlocalParm
indAudlocalParmList : ['$2' | '$3'] .
indAudlocalParmList -> '$empty' : [] .
%% at-most-once per item
%%
%% propertyparm and streamModes are used only to specify audit selection
%% criteria. AND/OR selection logic is specified at context level.
%%
indAudlocalParm -> 'ReservedGroupToken' : reservedGroupToken .
indAudlocalParm -> 'ReservedValueToken' : reservedValueToken .
indAudlocalParm -> 'ModeToken' : modeToken .
indAudlocalParm -> 'ModeToken' 'EQUAL' streamModes : {mode, {equal, '$3'}} .
indAudlocalParm -> 'ModeToken' 'INEQUAL' streamModes : {mode, {inequal,'$3'}} .
indAudlocalParm -> propertyParm : {prop, '$1'} .
indAudlocalParm -> pkgdName : {name, '$1'} .
indAudterminationStateDescriptor -> 'TerminationStateToken'
'LBRKT' indAudterminationStateParm 'RBRKT'
:
merge_indAudTerminationStateDescriptor('$3') .
%% at-most-once per item
%%
%% at-most-once per item except for propertyParm
indAudterminationStateParm -> iaServiceStates : '$1' .
indAudterminationStateParm -> 'BufferToken' : bufferToken .
indAudterminationStateParm -> propertyParm : {prop, '$1'} .
indAudterminationStateParm -> pkgdName : {name, '$1'} .
iaServiceStates -> 'ServiceStatesToken' :
serviceStatesToken .
iaServiceStates -> 'ServiceStatesToken' 'EQUAL' serviceStatesValue :
{serviceStates, {equal, '$3'}} .
iaServiceStates -> 'ServiceStatesToken' 'INEQUAL' serviceStatesValue :
{serviceStates, {inequal, '$3'}} .
indAudeventBufferDescriptor -> 'EventBufferToken'
'LBRKT' indAudeventSpec 'RBRKT' : '$3' .
indAudeventSpec -> pkgdName optIndAudeventSpecParameter
: merge_indAudEventBufferDescriptor('$1','$2') .
optIndAudeventSpecParameter -> 'LBRKT' indAudeventSpecParameter 'RBRKT'
: '$2' .
optIndAudeventSpecParameter -> '$empty' : asn1_NOVALUE .
indAudeventSpecParameter -> eventStream : {streamID, '$1'} .
indAudeventSpecParameter -> eventParameterName : {eventParameterName, '$1'} .
indAudeventsDescriptor -> 'EventsToken' 'LBRKT' indAudrequestedEvent 'RBRKT' :
#'IndAudEventsDescriptor'{pkgdName = '$3'} .
indAudeventsDescriptor -> 'EventsToken' 'EQUAL' requestID
'LBRKT' indAudrequestedEvent 'RBRKT' :
#'IndAudEventsDescriptor'{requestID = '$3',
pkgdName = '$5'} .
indAudrequestedEvent -> pkgdName : '$1' .
indAudsignalsDescriptor -> 'SignalsToken' optIndAudsignalParm : '$2' .
optIndAudsignalParm -> 'LBRKT' 'RBRKT' : asn1_NOVALUE .
optIndAudsignalParm -> 'LBRKT' indAudsignalParm 'RBRKT' : '$2' .
indAudsignalParm -> indAudsignalList : {seqSigList, '$1'} .
indAudsignalParm -> signalRequest : {signal, ensure_indAudSignal('$1')} .
indAudsignalList -> 'SignalListToken' 'EQUAL' signalListId :
#'IndAudSeqSigList'{id = ensure_uint16('$3')} .
indAudsignalList -> 'SignalListToken' 'EQUAL' signalListId
'LBRKT' signalListParm 'RBRKT' :
#'IndAudSeqSigList'{id = ensure_uint16('$3'),
signalList =
ensure_indAudSignalListParm('$5')} .
%% The DigitMapDescriptorToken is specially treated by the scanner
indAuddigitMapDescriptor -> 'DigitMapDescriptorToken' :
ensure_IADMD('$1') .
indAudstatisticsDescriptor -> 'StatsToken' 'LBRKT' pkgdName 'RBRKT' :
#'IndAudStatisticsDescriptor'{statName = '$3'} .
indAudpackagesDescriptor -> 'PackagesToken' 'LBRKT' packagesItem 'RBRKT'
: merge_indAudPackagesDescriptor('$3') .
eventStream -> 'StreamToken' 'EQUAL' streamID : '$3' .
%%
%% v2 - end
notifyRequest -> 'NotifyToken' 'EQUAL' termIDList
'LBRKT' notifyRequestBody 'RBRKT' :
NR = setelement(#'NotifyRequest'.terminationID,
'$5', '$3'),
make_commandRequest({notifyReq, '$1'}, NR) .
notifyRequestBody -> observedEventsDescriptor :
#'NotifyRequest'{observedEventsDescriptor = '$1'}.
notifyRequestBody -> errorDescriptor :
#'NotifyRequest'{errorDescriptor = '$1'}.
notifyReply -> 'NotifyToken' 'EQUAL' termIDList notifyReplyBody :
{notifyReply, #'NotifyReply'{terminationID = '$3',
errorDescriptor = '$4'}} .
notifyReplyBody -> 'LBRKT' errorDescriptor 'RBRKT' : '$2'.
notifyReplyBody -> '$empty' : asn1_NOVALUE .
serviceChangeRequest -> 'ServiceChangeToken' 'EQUAL' termIDList
'LBRKT' serviceChangeDescriptor 'RBRKT' :
make_commandRequest({serviceChangeReq, '$1'},
#'ServiceChangeRequest'{terminationID = '$3',
serviceChangeParms = '$5'}) .
serviceChangeReply -> 'ServiceChangeToken' 'EQUAL' termIDList
serviceChangeReplyBody :
{serviceChangeReply,
#'ServiceChangeReply'{terminationID = '$3',
serviceChangeResult = '$4'}} .
serviceChangeReplyBody -> 'LBRKT' errorDescriptor 'RBRKT' :
{errorDescriptor, '$2'} .
serviceChangeReplyBody -> 'LBRKT' serviceChangeReplyDescriptor 'RBRKT' :
{serviceChangeResParms, '$2'} .
serviceChangeReplyBody -> '$empty' :
{serviceChangeResParms, #'ServiceChangeResParm'{}}.
errorDescriptor -> 'ErrorToken' 'EQUAL' errorCode 'LBRKT'
errorText 'RBRKT' :
#'ErrorDescriptor'{errorCode = '$3',
errorText = '$5'} .
errorCode -> safeToken : ensure_uint('$1', 0, 999) .
errorText -> 'QuotedChars' : value_of('$1') .
errorText -> '$empty' : asn1_NOVALUE .
transactionID -> safeToken : ensure_uint32('$1') .
transactionID_and_segment_info -> safeToken :
make_transactionID_and_segment_info('$1') .
mId -> domainName : '$1' .
mId -> domainAddress : '$1' .
mId -> optSep mtpAddress optSep : '$2' .
mId -> optSep deviceName optSep : '$2' .
domainName -> 'LESSER' safeToken 'GREATER' 'COLON' portNumber optSep
: ensure_domainName('$2', '$5') .
domainName -> 'LESSER' safeToken 'GREATER'
: ensure_domainName('$2', asn1_NOVALUE) .
deviceName -> pathName : {deviceName, '$1'} .
%% '-' is used for NULL context
contextID -> safeToken : ensure_contextID('$1') .
domainAddress -> 'LSBRKT' daddr 'RSBRKT' 'COLON' portNumber optSep
: ensure_domainAddress('$2', '$5') .
domainAddress -> 'LSBRKT' daddr 'RSBRKT'
: ensure_domainAddress('$2', asn1_NOVALUE) .
daddr -> '$empty' : [] .
daddr -> 'COLON' daddr : [colon| '$2'] .
daddr -> safeToken daddr : ['$1'| '$2'] .
portNumber -> safeToken : ensure_uint16('$1') .
mtpAddress -> 'MtpAddressToken' : ensure_mtpAddress('$1') .
termIDList -> terminationID : ['$1'] .
termIDList -> LSBRKT terminationID terminationIDListRepeat RSBRKT :
['$2' | '$3'] .
terminationIDList -> 'LBRKT' terminationID terminationIDListRepeat 'RBRKT' :
['$2' | '$3'] .
terminationIDListRepeat -> 'COMMA' terminationID terminationIDListRepeat :
['$2'| '$3'] .
terminationIDListRepeat -> '$empty' : [] .
pathName -> safeToken : ensure_pathName('$1') .
terminationID -> safeToken : ensure_terminationID('$1') .
mediaDescriptor -> 'MediaToken' 'LBRKT' mediaParm mediaParmList 'RBRKT'
: merge_mediaDescriptor(['$3' | '$4']) .
mediaParmList -> 'COMMA' mediaParm mediaParmList : ['$2' | '$3'] .
mediaParmList -> '$empty' : [] .
%% at-most-once per item
%% using either streamParms or streamDescriptors but not both
mediaParm -> streamParm
: {streamParm, '$1'} .
mediaParm -> streamDescriptor
: {streamDescriptor, '$1'} .
mediaParm -> terminationStateDescriptor
: {termState, '$1'} .
%% at-most-once .
%% Specially treated by the scanner.
streamParm -> 'LocalDescriptorToken' :
PGs = ensure_prop_groups('$1'),
{local, #'LocalRemoteDescriptor'{propGrps = PGs}} .
streamParm -> 'RemoteDescriptorToken' :
PGs = ensure_prop_groups('$1'),
{remote, #'LocalRemoteDescriptor'{propGrps = PGs}} .
streamParm -> localControlDescriptor : {control, '$1'} .
streamParm -> statisticsDescriptor : {statistics, '$1'} .
streamDescriptor -> 'StreamToken' 'EQUAL' streamID
'LBRKT' streamParm streamParmList 'RBRKT'
: #'StreamDescriptor'{streamID = '$3',
streamParms = merge_streamParms(['$5' | '$6'])} .
streamParmList -> 'COMMA' streamParm streamParmList : ['$2' | '$3'] .
streamParmList -> '$empty' : [] .
localControlDescriptor -> 'LocalControlToken' 'LBRKT' localParm localParmList 'RBRKT'
: ['$3' | '$4'] .
localParmList -> 'COMMA' localParm localParmList : ['$2' | '$3'] .
localParmList -> '$empty': [] .
terminationStateDescriptor -> 'TerminationStateToken'
'LBRKT' terminationStateParm
terminationStateParms 'RBRKT'
: merge_terminationStateDescriptor(['$3' | '$4']) .
terminationStateParms -> 'COMMA' terminationStateParm terminationStateParms : ['$2' | '$3'] .
terminationStateParms -> '$empty' : [] .
%% at-most-once per item except for propertyParm
localParm -> 'ReservedGroupToken' 'EQUAL' onOrOff : {group, '$3'} .
localParm -> 'ReservedValueToken' 'EQUAL' onOrOff : {value, '$3'} .
localParm -> 'ModeToken' 'EQUAL' streamModes : {mode, '$3'} .
localParm -> propertyParm : {prop, '$1'} .
onOrOff -> 'OnToken' : true .
onOrOff -> 'OffToken' : false .
%% at-most-once
streamModes -> 'SendonlyToken' : sendOnly .
streamModes -> 'RecvonlyToken' : recvOnly .
streamModes -> 'SendrecvToken' : sendRecv .
streamModes -> 'InactiveToken' : inactive .
streamModes -> 'LoopbackToken' : loopBack .
propertyParm -> pkgdName parmValue :
setelement(#'PropertyParm'.name, '$2', '$1') .
parmValue -> 'EQUAL' alternativeValue :
'$2' .
parmValue -> 'NEQUAL' value :
#'PropertyParm'{value = ['$2'],
extraInfo = {relation, unequalTo}} .
parmValue -> 'LESSER' value :
#'PropertyParm'{value = ['$2'],
extraInfo = {relation, smallerThan}} .
parmValue -> 'GREATER' value :
#'PropertyParm'{value = ['$2'],
extraInfo = {relation, greaterThan}} .
%% OTP-4013
%% alternativeValue = ( VALUE /
%% LSBRKT VALUE *(COMMA VALUE) RSBRKT /
%% LSBRKT VALUE COLON VALUE RSBRKT ) /
%% LBRKT VALUE *(COMMA VALUE) RBRKT
alternativeValue -> 'LBRKT' value valueList 'RBRKT'
: #'PropertyParm'{value = ['$2' | '$3'],
extraInfo = {sublist, false}}. % OR
alternativeValue -> 'LSBRKT' value 'COLON' value 'RSBRKT'
: #'PropertyParm'{value = ['$2', '$4'],
extraInfo = {range, true}}.
alternativeValue -> 'LSBRKT' value valueList 'RSBRKT'
: #'PropertyParm'{value = ['$2' | '$3'],
extraInfo = {sublist, true}}. % AND
alternativeValue -> value :
#'PropertyParm'{value = ['$1']} .
valueList -> 'COMMA' value valueList : ['$2' | '$3'] .
valueList -> '$empty' : [] .
eventBufferDescriptor -> 'EventBufferToken' : [] .
eventBufferDescriptor -> 'EventBufferToken' 'LBRKT' eventSpec
eventSpecList 'RBRKT' :
['$3' | '$4'] .
eventSpecList -> 'COMMA' eventSpec eventSpecList : ['$2' | '$3'] .
eventSpecList -> '$empty' : [] .
eventSpec -> observedEvent : merge_eventSpec('$1') .
%% at-most-once per item except for propertyParm
terminationStateParm -> serviceStates : {serviceState, '$1'} .
terminationStateParm -> eventBufferControl : {eventBufferControl, '$1'} .
terminationStateParm -> propertyParm : {propertyParm, '$1'} .
serviceStates -> 'ServiceStatesToken' 'EQUAL' serviceStatesValue : '$3'.
serviceStatesValue -> 'TestToken' : test .
serviceStatesValue -> 'OutOfSvcToken' : outOfSvc .
serviceStatesValue -> 'InSvcToken' : inSvc .
eventBufferControl -> 'BufferToken' 'EQUAL' eventBufferControlValue : '$3' .
eventBufferControlValue -> 'OffToken' : off .
eventBufferControlValue -> 'LockStepToken' : lockStep .
muxDescriptor -> 'MuxToken' 'EQUAL' muxType terminationIDList :
#'MuxDescriptor'{muxType = '$3',
termList = '$4'} .
muxType -> safeToken : ensure_muxType('$1') .
streamID -> safeToken : ensure_streamID('$1') .
pkgdName -> safeToken : ensure_pkgdName('$1') .
eventsDescriptor -> 'EventsToken' :
#'EventsDescriptor'{requestID = asn1_NOVALUE,
eventList = []} .
eventsDescriptor -> 'EventsToken' 'EQUAL' requestID
'LBRKT' requestedEvent requestedEvents 'RBRKT' :
#'EventsDescriptor'{requestID = '$3',
eventList = ['$5' | '$6']} .
requestedEvents -> 'COMMA' requestedEvent requestedEvents : ['$2' | '$3'] .
requestedEvents -> '$empty' : [] .
requestedEvent -> pkgdName requestedEventBody :
setelement(#'RequestedEvent'.pkgdName, '$2', '$1') .
requestedEventBody -> 'LBRKT' eventParameter eventParameters 'RBRKT' :
merge_eventParameters(['$2' | '$3']) .
requestedEventBody -> '$empty' : #'RequestedEvent'{evParList = []} .
notifyRegulated -> 'NotifyRegulatedToken' :
#'RegulatedEmbeddedDescriptor'{} .
notifyRegulated -> 'NotifyRegulatedToken' 'LBRKT' embedWithSig 'RBRKT' :
make_RegulatedEmbeddedDescriptor('$3') .
notifyRegulated -> 'NotifyRegulatedToken' 'LBRKT' embedNoSig 'RBRKT' :
make_RegulatedEmbeddedDescriptor('$3') .
notifyBehaviour -> 'NotifyImmediateToken' : {notifyImmediate, 'NULL'} .
notifyBehaviour -> 'NeverNotifyToken' : {neverNotify, 'NULL'} .
notifyBehaviour -> notifyRegulated : {notifyRegulated, '$1'} .
eventParameters -> 'COMMA' eventParameter eventParameters :
['$2' | '$3'] .
eventParameters -> '$empty' : [] .
%% at-most-once each of embedOrKeepActive , eventDM or eventStream
eventParameter -> 'KeepActiveToken' : keepActive .
eventParameter -> embedWithSig : '$1'.
eventParameter -> embedNoSig : '$1'.
eventParameter -> eventDM : '$1'.
eventParameter -> eventStreamOrOther : '$1'.
eventParameter -> notifyBehaviour : {notifyBehaviour, '$1'}.
eventParameter -> 'ResetEventsDescriptorToken' : resetEventsDescriptor .
embedWithSig -> 'EmbedToken' 'LBRKT' signalsDescriptor
'COMMA' embedFirst 'RBRKT'
: {embed, '$3', '$5'} .
embedWithSig -> 'EmbedToken' 'LBRKT' signalsDescriptor 'RBRKT'
: {embed, '$3', asn1_NOVALUE} .
embedNoSig -> 'EmbedToken' 'LBRKT' embedFirst 'RBRKT'
: {embed, asn1_NOVALUE, '$3'} .
embedFirst -> 'EventsToken' :
#'SecondEventsDescriptor'{requestID = asn1_NOVALUE,
eventList = []} .
embedFirst -> 'EventsToken' 'EQUAL' requestID
'LBRKT' secondRequestedEvent secondRequestedEvents 'RBRKT' :
#'SecondEventsDescriptor'{requestID = '$3',
eventList = ['$5' | '$6']} .
secondRequestedEvents -> 'COMMA' secondRequestedEvent secondRequestedEvents : ['$2' | '$3'] .
secondRequestedEvents -> '$empty' : [] .
%% at-most-once of each
secondRequestedEvent -> pkgdName secondRequestedEventBody
: setelement(#'SecondRequestedEvent'.pkgdName, '$2', '$1') .
secondRequestedEventBody -> 'LBRKT' secondEventParameter secondEventParameters 'RBRKT'
: merge_secondEventParameters(['$2' | '$3']) .
secondRequestedEventBody -> '$empty' : #'SecondRequestedEvent'{evParList = []} .
secondEventParameters -> 'COMMA' secondEventParameter secondEventParameters : ['$2' | '$3'] .
secondEventParameters -> '$empty' : [] .
%% at-most-once each of embedOrKeepActive , eventDM or eventStream
secondEventParameter -> 'KeepActiveToken' : keepActive .
secondEventParameter -> embedSig : '$1' .
secondEventParameter -> eventDM : '$1' .
secondEventParameter -> eventStreamOrOther : '$1' .
secondEventParameter -> notifyBehaviour : {notifyBehaviour, '$1'}.
secondEventParameter -> 'ResetEventsDescriptorToken' : resetEventsDescriptor .
embedSig -> 'EmbedToken' 'LBRKT' signalsDescriptor 'RBRKT'
: {second_embed, '$3'} .
eventStreamOrOther -> eventParameterName parmValue :
select_stream_or_other('$1', '$2') .
eventParameterName -> safeToken : ensure_NAME('$1') .
%% The DigitMapDescriptorToken is specially treated by the scanner
eventDM -> 'DigitMapDescriptorToken' :
ensure_eventDM('$1') .
%% H248S-IG (IGv11)
signalsDescriptor -> 'SignalsToken' 'LBRKT' signalParm signalParms 'RBRKT' :
['$3' | '$4'] .
signalsDescriptor -> 'SignalsToken' : [] .
signalParms -> 'COMMA' signalParm signalParms : [ '$2' | '$3'] .
signalParms -> '$empty' : [] .
signalParm -> signalList : {seqSigList, '$1'} .
signalParm -> signalRequest : {signal, '$1'} .
signalRequest -> signalName 'LBRKT' sigParameter sigParameters 'RBRKT'
: merge_signalRequest('$1', ['$3' | '$4']).
signalRequest -> signalName : merge_signalRequest('$1', []).
sigParameters -> 'COMMA' sigParameter sigParameters : ['$2' | '$3'] .
sigParameters -> '$empty' : [] .
%% sigParameter = sigStream / sigSignalType / sigDuration / sigOther /
%% notifyCompletion / KeepActiveToken /
%% direction / sigRequestID
%% sigStream = StreamToken EQUAL StreamID
%% sigOther = sigParameterName parmValue
%% sigParameterName = NAME
%% sigSignalType = SignalTypeToken EQUAL signalType
%% signalType = (OnOffToken / TimeOutToken / BriefToken)
%% sigDuration = DurationToken EQUAL UINT16
%% notifyCompletion = NotifyCompletionToken EQUAL (LBRKT
%% notificationReason *(COMMA notificationReason)
%% RBRKT)
%%
%% notificationReason = ( TimeOutToken / InterruptByEventToken /
%% InterruptByNewSignalsDescrToken /
%% OtherReasonToken )
%% sigDirection = DirectionToken EQUAL direction
%% sigRequestID = RequestIDToken EQUAL RequestID
%% sigIntsigDelay = IntsigDelayToken EQUAL UINT16
sigParameter -> 'StreamToken' 'EQUAL' streamID :
{stream, '$3'}.
sigParameter -> 'SignalTypeToken' 'EQUAL' signalType :
{signal_type, '$3'} .
sigParameter -> 'DurationToken' 'EQUAL' safeToken :
{duration, ensure_uint16('$3')} .
sigParameter -> 'NotifyCompletionToken' 'EQUAL'
'LBRKT' notificationReason notificationReasons 'RBRKT' :
{notify_completion, ['$4' | '$5']} .
sigParameter -> 'KeepActiveToken' : keepActive .
sigParameter -> 'DirectionToken' 'EQUAL' direction :
{direction, '$3'} .
sigParameter -> 'RequestIDToken' 'EQUAL' requestID :
{requestId, '$3'} .
sigParameter -> 'IntsigDelayToken' 'EQUAL' safeToken :
{intersigDelay, ensure_uint16('$3')} .
sigParameter -> safeToken parmValue :
{other, ensure_NAME('$1'), '$2'}.
signalType -> 'OnOffToken' : onOff.
signalType -> 'TimeOutToken' : timeOut.
signalType -> 'BriefToken' : brief.
direction -> 'ExternalToken' : external .
direction -> 'InternalToken' : internal .
direction -> 'BothToken' : both .
notificationReasons -> 'COMMA' notificationReason notificationReasons : ['$2' | '$3'] .
notificationReasons -> '$empty' : [] .
notificationReason -> 'TimeOutToken' : onTimeOut .
notificationReason -> 'InterruptByEventToken' : onInterruptByEvent .
notificationReason -> 'InterruptByNewSignalsDescrToken' : onInterruptByNewSignalDescr .
notificationReason -> 'OtherReasonToken' : otherReason .
notificationReason -> 'IterationToken' : iteration .
signalList -> 'SignalListToken' 'EQUAL' signalListId
'LBRKT' signalListParm signalListParms 'RBRKT'
: #'SeqSigList'{id = ensure_uint16('$3'),
signalList = ['$5' | '$6']} .
signalListParms -> 'COMMA' signalListParm signalListParms :
['$2' | '$3'] .
signalListParms -> '$empty' : [] .
signalListId -> safeToken : ensure_uint16('$1') .
%% exactly once signalType,
%% at most once duration and every signal parameter
signalListParm -> signalRequest : '$1'.
signalName -> pkgdName : '$1'.
observedEventsDescriptor -> 'ObservedEventsToken' 'EQUAL' requestID
'LBRKT' observedEvent observedEvents 'RBRKT'
: #'ObservedEventsDescriptor'{requestId = '$3',
observedEventLst = ['$5' | '$6']} .
observedEvents -> 'COMMA' observedEvent observedEvents : ['$2' | '$3'] .
observedEvents -> '$empty' : [] .
%%time per event, because it might be buffered
observedEvent -> timeStamp optSep 'COLON' optSep pkgdName observedEventBody :
merge_observed_event('$6', '$5', '$1') .
observedEvent -> optSep pkgdName observedEventBody :
merge_observed_event('$3', '$2', asn1_NOVALUE) .
observedEventBody -> 'LBRKT' observedEventParameter
observedEventParameters 'RBRKT'
: ['$2' | '$3'] .
observedEventBody -> '$empty' : [] .
observedEventParameters -> 'COMMA' observedEventParameter observedEventParameters : ['$2' | '$3'] .
observedEventParameters -> '$empty' : [] .
%%at-most-once eventStream, every eventParameterName at most once
observedEventParameter -> eventStreamOrOther : '$1' .
requestID -> safeToken : ensure_requestID('$1') .
%% Deprecated as of Corr 1
modemDescriptor -> 'ModemToken' 'EQUAL' modemType optPropertyParms .
modemDescriptor -> 'ModemToken' 'LSBRKT' modemType modemTypeList 'RSBRKT'
optPropertyParms.
modemTypeList -> 'COMMA' modemType modemTypeList.
modemTypeList -> '$empty'.
modemType -> safeToken.
optPropertyParms -> 'LBRKT' propertyParm propertyParmList 'RBRKT' :
['$2' | '$3'] .
optPropertyParms -> '$empty' : [] .
propertyParms -> propertyParm propertyParmList : ['$1' | '$2'] .
propertyParmList -> 'COMMA' propertyParm propertyParmList : ['$2' | '$3'] .
propertyParmList -> '$empty' : [] .
% parmName -> safeToken : ensure_NAME('$1') .
%% The DigitMapDescriptorToken is specially treated by the scanner
digitMapDescriptor -> 'DigitMapDescriptorToken' :
ensure_DMD('$1') .
%% each parameter at-most-once, except auditItem
%% at most one of either serviceChangeAddress or serviceChangeMgcId but
%% not both. serviceChangeMethod and serviceChangeReason are REQUIRED
serviceChangeDescriptor -> 'ServicesToken'
'LBRKT' serviceChangeParm
serviceChangeParms 'RBRKT' :
merge_ServiceChangeParm(['$3' | '$4']) .
serviceChangeParms -> 'COMMA' serviceChangeParm serviceChangeParms :
['$2' | '$3'] .
serviceChangeParms -> '$empty' : [] .
serviceChangeParm -> serviceChangeMethod : {method, '$1'} .
serviceChangeParm -> serviceChangeReason : {reason, '$1'} .
serviceChangeParm -> serviceChangeDelay : {delay, '$1'} .
serviceChangeParm -> serviceChangeAddress : {address, '$1'} .
serviceChangeParm -> serviceChangeProfile : {profile, '$1'} .
serviceChangeParm -> extension : {extension, '$1'} .
serviceChangeParm -> timeStamp : {time_stamp, '$1'} .
serviceChangeParm -> serviceChangeMgcId : {mgc_id, '$1'} .
serviceChangeParm -> serviceChangeVersion : {version, '$1'} .
serviceChangeParm -> 'ServiceChangeIncompleteToken' : incomplete . % v3
serviceChangeParm -> auditItem : {audit_item, '$1'} . % v2
serviceChangeMethod -> 'MethodToken' 'EQUAL' safeToken :
ensure_serviceChangeMethod('$3') .
serviceChangeReason -> 'ReasonToken' 'EQUAL' value : ['$3'] .
serviceChangeDelay -> 'DelayToken' 'EQUAL' safeToken : ensure_uint32('$3').
serviceChangeAddress -> 'ServiceChangeAddressToken' 'EQUAL' mId : '$3' .
serviceChangeAddress -> 'ServiceChangeAddressToken' 'EQUAL' portNumber :
{portNumber, '$3'} .
serviceChangeMgcId -> 'MgcIdToken' 'EQUAL' mId : '$3' .
serviceChangeProfile -> 'ProfileToken' 'EQUAL' safeToken : ensure_profile('$3').
serviceChangeVersion -> 'VersionToken' 'EQUAL' safeToken : ensure_version('$3') .
extension -> extensionParameter parmValue
: setelement(#'PropertyParm'.name, '$2', '$1') .
%% at most once. Version is REQUIRED on first ServiceChange response
%% at most of either serviceChangeAddress or serviceChangeMgcId but not both
serviceChangeReplyDescriptor -> 'ServicesToken'
'LBRKT' servChgReplyParm
servChgReplyParms 'RBRKT' :
merge_ServiceChangeResParm(['$3' | '$4']) .
servChgReplyParms -> 'COMMA' servChgReplyParm servChgReplyParms :
['$2' | '$3'] .
servChgReplyParms -> '$empty' : [] .
servChgReplyParm -> serviceChangeAddress : {address, '$1'} .
servChgReplyParm -> serviceChangeMgcId : {mgc_id, '$1'} .
servChgReplyParm -> serviceChangeProfile : {profile, '$1'} .
servChgReplyParm -> serviceChangeVersion : {version, '$1'} .
servChgReplyParm -> timeStamp : {time_stamp,'$1'} .
packagesDescriptor -> 'PackagesToken' 'LBRKT' packagesItem
packagesItems 'RBRKT'
: ['$3' | '$4'] .
packagesItems -> 'COMMA' packagesItem packagesItems : ['$2' | '$3'] .
packagesItems -> '$empty' : [] .
packagesItem -> safeToken : ensure_packagesItem('$1') .
timeStamp -> TimeStampToken : ensure_timeStamp('$1') .
statisticsDescriptor -> 'StatsToken'
'LBRKT' statisticsParameter
statisticsParameters 'RBRKT'
: ['$3' | '$4'] .
statisticsParameters -> 'COMMA' statisticsParameter statisticsParameters : ['$2' | '$3'] .
statisticsParameters -> '$empty' : [] .
%%at-most-once per item
statisticsParameter -> pkgdName :
#'StatisticsParameter'{statName = '$1',
statValue = asn1_NOVALUE} .
statisticsParameter -> pkgdName 'EQUAL' value :
#'StatisticsParameter'{statName = '$1',
statValue = ['$3']} .
statisticsParameter -> pkgdName 'EQUAL' 'LSBRKT' value valueList 'RSBRKT' :
#'StatisticsParameter'{statName = '$1',
statValue = ['$4' | '$5']} .
topologyDescriptor -> 'TopologyToken' 'LBRKT'
topologyDescComp topologyDescCompList 'RBRKT' :
merge_topologyDescriptor(['$3' | '$4']) .
topologyDescComp -> terminationID : {tid, '$1'} .
topologyDescComp -> eventStream : {sid, '$1'} .
topologyDescComp -> topologyDirection : '$1' .
topologyDescCompList -> '$empty' : [] .
topologyDescCompList -> 'COMMA' topologyDescComp topologyDescCompList :
['$2' | '$3'] .
topologyDirection -> 'BothwayToken' : {direction, bothway} .
topologyDirection -> 'IsolateToken' : {direction, isolate} .
topologyDirection -> 'OnewayToken' : {direction, oneway} .
topologyDirection -> 'OnewayExternalToken' : {direction_ext, onewayexternal} .
topologyDirection -> 'OnewayBothToken' : {direction_ext, onewayboth} .
iepsValue -> 'IEPSToken' 'EQUAL' onOrOff : '$3' .
emergencyValue -> 'EmergencyValueToken' 'EQUAL' 'EmergencyToken' : true .
emergencyValue -> 'EmergencyValueToken' 'EQUAL' 'EmergencyOffToken' : false .
priority -> 'PriorityToken' 'EQUAL' safeToken : ensure_uint16('$3') .
extensionParameter -> safeToken : ensure_extensionParameter('$1') .
value -> 'QuotedChars' : ensure_value('$1') .
value -> safeToken : ensure_value('$1').
safeToken -> safeToken2 : make_safe_token('$1') .
safeToken2 -> 'SafeChars' : '$1' .
%% BMK BMK safeToken2 -> 'AddToken' : '$1' .
safeToken2 -> 'AuditToken' : '$1' .
safeToken2 -> 'AuditCapToken' : '$1' .
safeToken2 -> 'AuditValueToken' : '$1' .
safeToken2 -> 'AuthToken' : '$1' .
safeToken2 -> 'BothToken' : '$1' . % v3
%% v3-safeToken2 -> 'BothwayToken' : '$1' .
safeToken2 -> 'BriefToken' : '$1' .
%% v3-safeToken2 -> 'BufferToken' : '$1' .
safeToken2 -> 'CtxToken' : '$1' .
%% v3-safeToken2 -> 'ContextAttrToken' : '$1' . % v3
safeToken2 -> 'ContextAuditToken' : '$1' .
%% v3-safeToken2 -> 'ContextListToken' : '$1' . % v3
%% v2-safeToken2 -> 'DigitMapToken' : '$1' .
%% safeToken2 -> 'DigitMapDescriptorToken' : '$1' .
%% v3-
safeToken2 -> 'DirectionToken' : '$1' . % v3
safeToken2 -> 'DiscardToken' : '$1' .
safeToken2 -> 'DisconnectedToken' : '$1' .
safeToken2 -> 'DelayToken' : '$1' .
safeToken2 -> 'DurationToken' : '$1' .
safeToken2 -> 'EmbedToken' : '$1' .
%% BMK BMK safeToken2 -> 'EmergencyToken' : '$1' .
%% BMK BMK safeToken2 -> 'EmergencyOffToken' : '$1' .
safeToken2 -> 'ErrorToken' : '$1' .
%% v2-safeToken2 -> 'EventBufferToken' : '$1' .
%% v2-safeToken2 -> 'EventsToken' : '$1' .
%% v3-safeToken2 -> 'ExternalToken' : '$1' . % v3
safeToken2 -> 'FailoverToken' : '$1' .
safeToken2 -> 'ForcedToken' : '$1' .
safeToken2 -> 'GracefulToken' : '$1' .
safeToken2 -> 'H221Token' : '$1' .
safeToken2 -> 'H223Token' : '$1' .
safeToken2 -> 'H226Token' : '$1' .
safeToken2 -> 'HandOffToken' : '$1' .
%% v3-safeToken2 -> 'IEPSToken' : '$1' . % v3
safeToken2 -> 'ImmAckRequiredToken' : '$1' .
safeToken2 -> 'InactiveToken' : '$1' .
%% v3-safeToken2 -> 'InternalToken' : '$1' . % v3
safeToken2 -> 'InterruptByEventToken' : '$1' .
safeToken2 -> 'InterruptByNewSignalsDescrToken' : '$1' .
%% v3-safeToken2 -> 'IsolateToken' : '$1' .
safeToken2 -> 'InSvcToken' : '$1' .
safeToken2 -> 'KeepActiveToken' : '$1' .
%% safeToken2 -> 'LocalToken' : '$1' .
%% safeToken2 -> 'LocalDescriptorToken' : '$1' .
safeToken2 -> 'LocalControlToken' : '$1' .
safeToken2 -> 'LoopbackToken' : '$1' .
safeToken2 -> 'LockStepToken' : '$1' .
%% v2-safeToken2 -> 'MediaToken' : '$1' .
%% safeToken2 -> 'MegacopToken' : '$1' .
safeToken2 -> 'MethodToken' : '$1' .
safeToken2 -> 'MgcIdToken' : '$1' .
%% v3-safeToken2 -> 'ModeToken' : '$1' .
%% BMK BMK safeToken2 -> 'ModifyToken' : '$1' .
%% v2-safeToken2 -> 'ModemToken' : '$1' .
%% BMK BMK safeToken2 -> 'MoveToken' : '$1' .
%% safeToken2 -> 'MtpToken' : '$1' .
%% safeToken2 -> 'MtpAddressToken' : '$1' .
%% v2-safeToken2 -> 'MuxToken' : '$1' .
safeToken2 -> 'NotifyToken' : '$1' .
safeToken2 -> 'NotifyCompletionToken' : '$1' .
safeToken2 -> 'Nx64Token' : '$1' .
%% v2-safeToken2 -> 'ObservedEventsToken' : '$1' .
%% v3-safeToken2 -> 'OnewayToken' : '$1' .
%% v3-safeToken2 -> 'OnewayExternalToken' : '$1' .
%% v3-safeToken2 -> 'OnewayBothToken' : '$1' .
safeToken2 -> 'OffToken' : '$1' .
safeToken2 -> 'OnToken' : '$1' .
safeToken2 -> 'OnOffToken' : '$1' .
safeToken2 -> 'OutOfSvcToken' : '$1' .
safeToken2 -> 'OtherReasonToken' : '$1' .
%% v2-safeToken2 -> 'PackagesToken' : '$1' .
safeToken2 -> 'PendingToken' : '$1' .
%% BMK BMK safeToken2 -> 'PriorityToken' : '$1' .
safeToken2 -> 'ProfileToken' : '$1' .
safeToken2 -> 'ReasonToken' : '$1' .
safeToken2 -> 'RecvonlyToken' : '$1' .
safeToken2 -> 'ReplyToken' : '$1' .
%% v3-
safeToken2 -> 'RequestIDToken' : '$1' . % v3
safeToken2 -> 'ResponseAckToken' : '$1' .
safeToken2 -> 'RestartToken' : '$1' .
%% safeToken2 -> 'RemoteToken' : '$1' .
%% safeToken2 -> 'RemoteDescriptorToken' : '$1' .
%% v3-safeToken2 -> 'ReservedGroupToken' : '$1' .
%% v3-safeToken2 -> 'ReservedValueToken' : '$1' .
safeToken2 -> 'SendonlyToken' : '$1' .
safeToken2 -> 'SendrecvToken' : '$1' .
safeToken2 -> 'ServicesToken' : '$1' .
%% v3-safeToken2 -> 'ServiceStatesToken' : '$1' .
safeToken2 -> 'ServiceChangeToken' : '$1' .
%% v3-safeToken2 -> 'ServiceChangeIncompleteToken' : '$1' . % v3
safeToken2 -> 'ServiceChangeAddressToken' : '$1' .
safeToken2 -> 'SignalListToken' : '$1' .
%% v2-safeToken2 -> 'SignalsToken' : '$1' .
safeToken2 -> 'SignalTypeToken' : '$1' .
%% v2-safeToken2 -> 'StatsToken' : '$1' .
safeToken2 -> 'StreamToken' : '$1' .
%% BMK BMK safeToken2 -> 'SubtractToken' : '$1' .
safeToken2 -> 'SynchISDNToken' : '$1' .
safeToken2 -> 'TerminationStateToken' : '$1' .
safeToken2 -> 'TestToken' : '$1' .
safeToken2 -> 'TimeOutToken' : '$1' .
%% BMK BMK safeToken2 -> 'TopologyToken' : '$1' .
safeToken2 -> 'TransToken' : '$1' .
safeToken2 -> 'V18Token' : '$1' .
safeToken2 -> 'V22Token' : '$1' .
safeToken2 -> 'V22bisToken' : '$1' .
safeToken2 -> 'V32Token' : '$1' .
safeToken2 -> 'V32bisToken' : '$1' .
safeToken2 -> 'V34Token' : '$1' .
safeToken2 -> 'V76Token' : '$1' .
safeToken2 -> 'V90Token' : '$1' .
safeToken2 -> 'V91Token' : '$1' .
safeToken2 -> 'VersionToken' : '$1' .
Erlang code.
%% The following directive is needed for (significantly) faster compilation
%% of the generated .erl file by the HiPE compiler. Please do not remove.
-compile([{hipe,[{regalloc,linear_scan}]}]).
-include("megaco_text_parser_v3.hrl").
