<?xml version="1.0" encoding="latin1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
<year>2004</year><year>2010</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
compliance with the License. You should have received a copy of the
Erlang Public License along with this software. If not, it can be
retrieved online at http://www.erlang.org/.
Software distributed under the License is distributed on an "AS IS"
basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
the License for the specific language governing rights and limitations
under the License.
</legalnotice>
<title>ODBC Release Notes</title>
<prepared>otp_appnotes</prepared>
<docno>nil</docno>
<date>nil</date>
<rev>nil</rev>
<file>notes.xml</file>
</header>
<p>This document describes the changes made to the odbc application.
</p>
<section><title>ODBC 2.10.10</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
Better error messages for connection issues.</p>
<p>
Own Id: OTP-9111</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.9</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Ipv6 is now supported on Windows as well as on UNIX for
internal socket communication. (ODBC uses sockets instead
of the "Erlang port pipes" as some ODBC-drivers are known
to mess with stdin/stdout.) </p>
<p>
Loopback address constants are used when connecting the
c-side to the erlang-side over local socket API avoiding
getaddrinfo problems, and the {ip, loopback} option is
added as a listen option on the erlang-side. Also cleaned
up the TIME_STAMP contribution.</p>
<p>
Own Id: OTP-8917</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.8</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
ODBC now handles the types SQL_WCHAR and SQL_WVARCHAR.
Thanks to Juhani R�nkimies. ODBC also has a new
connection option to return all strings as binaries and
also expect strings to be binaries in the param_query
function. These changes provides some unicode support.</p>
<p>
Own Id: OTP-7452</p>
</item>
<item>
<p>
Now supports SQL_TYPE_TIMESTAMP on the format {{YY, MM,
DD}, {HH, MM, SS}}. Thanks to Juhani R�nkimies.</p>
<p>
*** POTENTIAL INCOMPATIBILITY ***</p>
<p>
Own Id: OTP-8511</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.7</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
The odbc application can now be compiled on FreeBSD.
(Thanks to Kenji Rikitake.)</p>
<p>
Own Id: OTP-8444</p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>Cross compilation improvements and other build system
improvements.</p>
<p>Most notable:</p> <list><item> Lots of cross
compilation improvements. The old cross compilation
support was more or less non-existing as well as broken.
Please, note that the cross compilation support should
still be considered as experimental. Also note that old
cross compilation configurations cannot be used without
modifications. For more information on cross compiling
Erlang/OTP see the <c>$ERL_TOP/INSTALL-CROSS.md</c> file.
</item><item> Support for staged install using <url
href="http://www.gnu.org/prep/standards/html_node/DESTDIR.html">DESTDIR</url>.
The old broken <c>INSTALL_PREFIX</c> has also been fixed.
For more information see the <c>$ERL_TOP/INSTALL.md</c>
file. </item><item> Documentation of the <c>release</c>
target of the top <c>Makefile</c>. For more information
see the <c>$ERL_TOP/INSTALL.md</c> file. </item><item>
<c>make install</c> now by default creates relative
symbolic links instead of absolute ones. For more
information see the <c>$ERL_TOP/INSTALL.md</c> file.
</item><item> <c>$ERL_TOP/configure --help=recursive</c>
now works and prints help for all applications with
<c>configure</c> scripts. </item><item> Doing <c>make
install</c>, or <c>make release</c> directly after
<c>make all</c> no longer triggers miscellaneous
rebuilds. </item><item> Existing bootstrap system is now
used when doing <c>make install</c>, or <c>make
release</c> without a preceding <c>make all</c>.
</item><item> The <c>crypto</c> and <c>ssl</c>
applications use the same runtime library path when
dynamically linking against <c>libssl.so</c> and
<c>libcrypto.so</c>. The runtime library search path has
also been extended. </item><item> The <c>configure</c>
scripts of <c>erl_interface</c> and <c>odbc</c> now
search for thread libraries and thread library quirks the
same way as <c>erts</c> do. </item><item> The
<c>configure</c> script of the <c>odbc</c> application
now also looks for odbc libraries in <c>lib64</c> and
<c>lib/64</c> directories when building on a 64-bit
system. </item><item> The <c>config.h.in</c> file in the
<c>erl_interface</c> application is now automatically
generated in instead of statically updated which reduces
the risk of <c>configure</c> tests without any effect.
</item></list>
<p>(Thanks to Henrik Riomar for suggestions and
testing)</p>
<p>(Thanks to Winston Smith for the AVR32-Linux cross
configuration and testing)</p>
<p>
*** POTENTIAL INCOMPATIBILITY ***</p>
<p>
Own Id: OTP-8323</p>
</item>
<item>
<p>The documentation is now possible to build in an open
source environment after a number of bugs are fixed and
some features are added in the documentation build
process. </p>
<p>- The arity calculation is updated.</p>
<p>- The module prefix used in the function names for
bif's are removed in the generated links so the links
will look like
"http://www.erlang.org/doc/man/erlang.html#append_element-2"
instead of
"http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2".</p>
<p>- Enhanced the menu positioning in the html
documentation when a new page is loaded.</p>
<p>- A number of corrections in the generation of man
pages (thanks to Sergei Golovan)</p>
<p>- The legal notice is taken from the xml book file so
OTP's build process can be used for non OTP
applications.</p>
<p>
Own Id: OTP-8343</p>
</item>
<item>
<p>
odbc:param_query() now properly indicates if nothing was
updated. (Thanks to Paul Oliver.)</p>
<p>
Own Id: OTP-8347</p>
</item>
</list>
</section>
<section><title>Known Bugs and Problems</title>
<list>
<item>
<p>
The ODBC test cases are failing for linux and MacOSX
There is problems with setting of options on
odbc-connections, and the odbcserver just exits with an
exit code.</p>
<p>
Own Id: OTP-8407</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.6</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
Applied a patch from Andrew Thompson, which fixes some
error cases.</p>
<p>
Own Id: OTP-8291</p>
</item>
</list>
</section>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
The documentation is now built with open source tools
(xsltproc and fop) that exists on most platforms. One
visible change is that the frames are removed.</p>
<p>
Own Id: OTP-8250</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.5</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
A missing return statement in a non void function has been fixed in <c>odbc</c>. (Thanks to Nico Kruber)
</p>
<p>
Own Id: OTP-7978</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.4</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
param_query now handles the in_or_out parameter
correctly.</p>
<p>
Own Id: OTP-7720</p>
</item>
<item>
<p>
Changed the internal socket use so that it will become
more robust to non-functional ipv6 and fallback on ipv4.</p>
<p>
Own Id: OTP-7721</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.3</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Configure update for mac.</p>
<p>
Own Id: OTP-7418</p>
</item>
</list>
</section>
<section><title>Known Bugs and Problems</title>
<list>
<item>
<p>
describe_table/[2,3] on mac gives an empty result</p>
<p>
Own Id: OTP-7478</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.2</title>
<section><title>Fixed Bugs and Malfunctions</title>
<list>
<item>
<p>
SQLINTEGERs where not retrieved correctly on 64 bit
platforms as an SQLINTEGER is defined to be a 32 bit
integer and not a true long.</p>
<p>
Own Id: OTP-7297</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10.1</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Now supports out and input parameters for stored
procedures.</p>
<p>
Own Id: OTP-7019</p>
</item>
<item>
<p>
ODBC is now prebuilt for SLES10 in the commercial build
and parameters to error_logger:error_report/1 has been
corrected.</p>
<p>
Own Id: OTP-7294</p>
</item>
<item>
<p>
Parametrized queries will now work correctly when using
Erlang R12B-2 on Linux (SuSE 10.3), MySQL 5.0.45, myodbc
3.51 and unixODBC 2.2.12. Earlier it could happen that an
error was returned even though data was correctly
inserted into the database.</p>
<p>
Own Id: OTP-7307</p>
</item>
</list>
</section>
<section><title>Known Bugs and Problems</title>
<list>
<item>
<p>
SQLINTEGERs are not retrieved correctly on 64 bit
platforms as an SQLINTEGER seems to be defined to be a 32
bit integer and not a true long.</p>
<p>
Own Id: OTP-7297</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.10</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
Enhanced configure to among other things work better when
there is a library found but it is not usable e.i. 32 bit
library in 64 bit build.</p>
<p>
Own Id: OTP-7062</p>
</item>
</list>
</section>
</section>
<section><title>ODBC 2.0.9</title>
<section><title>Improvements and New Features</title>
<list>
<item>
<p>
The odbc application now has to be explicitly started and
stopped e.i. it will not automatically be started as a
temporary application as it did before. Although a
practical feature when testing things in the shell, it is
not desirable that people take advantage of this and not
start the odbc application in a correct way in their
products. Added functions to the odbc API that calls
application:start/stop.</p>
<p>
*** POTENTIAL INCOMPATIBILITY ***</p>
<p>
Own Id: OTP-6984</p>
</item>
<item>
<p>
Changed Makefile.in so that odbc is not disabled on
64-bits architectures. It was earlier disabled due to
that it had never been tested in that environment.</p>
<p>
Own Id: OTP-6987</p>
</item>
</list>
</section>
</section>
<section>
<title>ODBC 2.0.8</title>
<section>
<title>Improvements and New Features</title>
<list type="bulleted">
<item>
<p>Minor Makefile changes.</p>
<p>Own Id: OTP-6689</p>
</item>
</list>
</section>
</section>
<section>
<title>ODBC 2.0.7</title>
<section>
<title>Fixed Bugs and Malfunctions</title>
<list type="bulleted">
<item>
<p>When using a parameterized query on a windows platform
the data was inserted in the table on the sql-server but
the connection was lost, this seems to be due to a
compiler error that has now been worked around, but
further investigation is ongoing to verify that that
really was the problem.</p>
<p>Own Id: OTP-5504</p>
</item>
<item>
<p>param_query/[3,4] could return an unexpected row count
for some drivers, in this case a postgresdriver.</p>
<p>Own Id: OTP-6363</p>
</item>
</list>
</section>
</section>
<section>
<title>ODBC 2.0.6</title>
<section>
<title>Fixed Bugs and Malfunctions</title>
<list type="bulleted">
<item>
<p>pthread header and library mismatch on linux systems (at
least some SuSE and Debian) with both NPTL and
Linuxthreads libraries installed.</p>
<p>Own Id: OTP-5981</p>
</item>
</list>
</section>
<section>
<title>Improvements and New Features</title>
<list type="bulleted">
<item>
<p>Changed configure to find odbc in /usr/local too</p>
<p>Own Id: OTP-5966</p>
</item>
</list>
</section>
<section>
<title>Known Bugs and Problems</title>
<list type="bulleted">
<item>
<p>When using a parameterized query on a windows platform
the data is inserted in the table on the sql-server but
for some reason the connection is lost.</p>
<p>Own Id: OTP-5504</p>
</item>
</list>
</section>
</section>
<section>
<title>ODBC 2.0.5</title>
<section>
<title>Fixed Bugs and Malfunctions</title>
<list type="bulleted">
<item>
<p>Fixed bug, reported error when deleting nonexisting rows,
thanks to Laura M. Castro for reporting this.</p>
<p>Own Id: OTP-5759</p>
</item>
</list>
</section>
<section>
<title>Known Bugs and Problems</title>
<list type="bulleted">
<item>
<p>When using a parameterized query on a windows platform
the data is inserted in the table on the sql-server but
for some reason the connection is lost.</p>
<p>Own Id: OTP-5504</p>
</item>
</list>
</section>
</section>
<section>
<title>Odbc 2.0.4</title>
<section>
<title>Improvements and New Features</title>
<list type="bulleted">
<item>
<p>/usr was added as a default place for configure to look
for the odbc library on unix/linux platforms.</p>
<p>Own Id: OTP-5501</p>
</item>
<item>
<p>A legacy timer in the c port program was set to infinity.
All timeout handling is handled by the erlang code and a
extra timeout in the c code will just lead to confusion
if it is released.</p>
<p>Own Id: OTP-5502</p>
</item>
</list>
</section>
<section>
<title>Known Bugs and Problems</title>
<list type="bulleted">
<item>
<p>When using a parameterized query on a windows platform
the data is inserted in the table on the sql-server but
for some reason the connection is lost.</p>
<p>Own Id: OTP-5504</p>
</item>
</list>
</section>
</section>
<section>
<title>Odbc 2.0.3</title>
<section>
<title>Improvements and New Features</title>
<list type="bulleted">
<item>
<p>odbc now uses configure as all "normal" applications
instead of providing special Makefiles for each
commercial supported platform. This also makes it easier
to build odbc on non supported platforms.</p>
<p>Own Id: OTP-5437</p>
</item>
</list>
</section>
</section>
<section>
<title>odbc 2.0.2</title>
<section>
<title>Fixed Bugs and Malfunctions</title>
<list type="bulleted">
<item>
<p>When issuing a batch of queries and one of the queries
fail the odbc port program crashed. This is no longer the
case.</p>
<p>Own Id: OTP-5176</p>
</item>
</list>
</section>
</section>
<section>
<title>odbc 2.0.1</title>
<section>
<title>Improvements and New Features</title>
<list type="bulleted">
<item>
<p>Added use of the socket option TCP_NODELAY, as in the
case of Erlang odbc the Nagel algorithm will never help,
but always cause an unnecessary delay.</p>
<p>Own Id: OTP-5100</p>
</item>
</list>
</section>
</section>
<section>
<title>odbc 2.0</title>
<section>
<title>Improvements and New Features</title>
<list type="bulleted">
<item>
<p>Erlang ODBC now handles batches of queries and can return
multiple result sets.</p>
<p>Own Id: OTP-4642 Aux Id: seq7766 </p>
</item>
<item>
<p>The old interface that became deprecated in odbc 1.0 has
now been removed.</p>
<p>*** POTENTIAL INCOMPATIBILITY ***</p>
<p>Own Id: OTP-4794</p>
</item>
<item>
<p>The port program now sends different exit codes to Erlang
when it exits due to failure. This instead of sending the
same exit code and then trying to write to stderr. Erlang
encodes the exit code to a descriptive atom.</p>
<p>Own Id: OTP-4813</p>
</item>
<item>
<p>Erlang ODBC now supports parameterized queries for the
most common ODBC data types.</p>
<p>Own Id: OTP-4821</p>
</item>
<item>
<p>SQL_NUMERIC and SQL_DECIMAL columns are converted to
integer and float values if possible.</p>
<p>*** POTENTIAL INCOMPATIBILITY ***</p>
<p>Own Id: OTP-4826</p>
</item>
<item>
<p>Result sets are now by default returned as a list of
tuples which is the most intuitive and useful mapping. To
keep some degree of backwards compatibility you may turn
this off to get the old behavior that result sets are
returned as lists of lists. However do not use this in
new code as it is considered a deprecated feature that
eventually will disappear.</p>
<p>*** POTENTIAL INCOMPATIBILITY ***</p>
<p>Own Id: OTP-4850</p>
</item>
<item>
<p>The odbc implementation now mostly uses sockets to
communicate between the c and the erlang process, this is
to avoid a lot of problems arising from different
odbc-drivers doing strange things that disturbed the
port-program communication mechanism.</p>
<p>Own Id: OTP-4875</p>
</item>
</list>
</section>
<!-- p>For information about older versions see
<url href="part_notes_history_frame.html">release notes history</url>.</p -->
</section>
</chapter>
