path: root/lib/runtime_tools/doc/src/dbg.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">

<erlref>
  <header>
    <copyright>
      <year>1996</year><year>2018</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
    
    </legalnotice>

    <title>dbg</title>
    <prepared>Patrik Nyblom (Claes Wikstrom)</prepared>
    <responsible></responsible>
    <docno>1</docno>
    <approved>ETX/B/SFP (Kenneth Lundin)</approved>
    <checked></checked>
    <date>96-11-07</date>
    <rev>A</rev>
    <file>dbg.sgml</file>
  </header>
  <module since="">dbg</module>
  <modulesummary>The Text Based Trace Facility</modulesummary>
  <description>
    <p>This module implements a text based interface to the
      <seealso marker="erts:erlang#trace-3"><c>trace/3</c></seealso> and the
      <seealso marker="erts:erlang#trace_pattern-2"><c>trace_pattern/2</c></seealso> BIFs.  It makes it
      possible to trace functions, processes, ports and messages.
    </p>
    <p>
      To quickly get started on tracing function calls you can use the following
      code in the Erlang shell:
    </p>
    <pre>
1> dbg:tracer(). %% Start the default trace message receiver
{ok,&lt;0.36.0>}
2> dbg:p(all, c). %% Setup call (c) tracing on all processes
{ok,[{matched,nonode@nohost,26}]}
3> dbg:tp(lists, seq, x). %% Setup an exception return trace (x) on lists:seq
{ok,[{matched,nonode@nohost,2},{saved,x}]}
4> lists:seq(1,10).
(&lt;0.34.0>) call lists:seq(1,10)
(&lt;0.34.0>) returned from lists:seq/2 -> [1,2,3,4,5,6,7,8,9,10]
[1,2,3,4,5,6,7,8,9,10]
    </pre>
    <p>
      For more examples of how to use <c>dbg</c> from the Erlang
      shell, see the <seealso marker="#simple_example">simple example</seealso> section.
    </p>
    <p>The utilities are also suitable to use in system testing on
      large systems, where other tools have too much impact on the
      system performance.  Some primitive support for sequential tracing
      is also included, see the <seealso marker="#advanced">advanced topics</seealso> section.
      </p>
  </description>
  <funcs>
    <func>
      <name since="">fun2ms(LiteralFun) -> MatchSpec</name>
      <fsummary>Pseudo function that transforms fun syntax to match_spec.</fsummary>
      <type>
        <v>LiteralFun = fun() literal</v>
        <v>MatchSpec = term()</v>
      </type>
      <desc>
        <p>Pseudo function that by means of a <c>parse_transform</c>
          translates the <em>literal</em><c>fun()</c> typed as parameter in
          the function call to a match specification as described in
          the <c>match_spec</c> manual of ERTS users guide.
          (with literal I mean that the <c>fun()</c> needs to
          textually be written as the parameter of the function, it
          cannot be held in a variable which in turn is passed to the 
          function). </p>
        <p>The parse transform is implemented in the module
          <c>ms_transform</c> and the source <em>must</em> include the
          file <c>ms_transform.hrl</c> in STDLIB for this
          pseudo function to work. Failing to include the hrl file in
          the source will result in a runtime error, not a compile
          time ditto. The include file is easiest included by adding
          the line
          <c>-include_lib("stdlib/include/ms_transform.hrl").</c> to
          the source file.</p>
        <p>The <c>fun()</c> is very restricted, it can take only a
          single parameter (the parameter list to match), a sole variable or a
          list. It needs to use the <c>is_</c>XXX guard tests and one
          cannot use language constructs that have no representation
          in a match_spec (like <c>if</c>, <c>case</c>,
          <c>receive</c> etc). The return value from the fun will be
          the return value of the resulting match_spec.</p>
        <p>Example:</p>
        <pre>
1> <input>dbg:fun2ms(fun([M,N]) when N > 3 -> return_trace() end).</input>
[{['$1','$2'],[{'>','$2',3}],[{return_trace}]}]</pre>
        <p>Variables from the environment can be imported, so that this
          works:</p>
        <pre>
2> <input>X=3.</input>
3
3> <input>dbg:fun2ms(fun([M,N]) when N > X  -> return_trace() end).</input>
[{['$1','$2'],[{'>','$2',{const,3}}],[{return_trace}]}]</pre>
        <p>The imported variables will be replaced by match_spec
          <c>const</c> expressions, which is consistent with the
          static scoping for Erlang <c>fun()</c>s. Local or global
          function calls cannot be in the guard or body of the fun
          however. Calls to builtin match_spec functions of course is
          allowed:</p>
        <pre>
4> <input>dbg:fun2ms(fun([M,N]) when N > X, is_atomm(M)  -> return_trace() end).</input>
Error: fun containing local erlang function calls ('is_atomm' called in guard)\
 cannot be translated into match_spec
{error,transform_error}
5> <input>dbg:fun2ms(fun([M,N]) when N > X, is_atom(M)  -> return_trace() end).</input>
[{['$1','$2'],[{'>','$2',{const,3}},{is_atom,'$1'}],[{return_trace}]}]</pre>
        <p>As you can see by the example, the function can be called from
          the shell too. The <c>fun()</c> needs to be literally in the
          call when used from the shell as well. Other means than the 
          parse_transform are used in the shell case, but more or less
          the same restrictions apply (the exception being records,
          as they are not handled by the shell).</p>
        <warning>
          <p>If the parse_transform is not applied to a module which calls this
            pseudo function, the call will fail in runtime (with a 
            <c>badarg</c>). The module <c>dbg</c> actually exports a
            function with this name, but it should never really be called
            except for when using the function in the shell. If the
            <c>parse_transform</c> is properly applied by including
            the <c>ms_transform.hrl</c> header file, compiled code
            will never call the function, but the function call is
            replaced by a literal match_spec.</p>
        </warning>
        <p>More information is provided by the <c>ms_transform</c>
          manual page in STDLIB.</p>
      </desc>
    </func>
    <func>
      <name since="">h() -> ok </name>
      <fsummary>Give a list of available help items on standard output.</fsummary>
      <desc>
        <p>Gives a list of items for brief online help.</p>
      </desc>
    </func>
    <func>
      <name since="">h(Item) -> ok </name>
      <fsummary>Give brief help for an item.</fsummary>
      <type>
        <v>Item = atom()</v>
      </type>
      <desc>
        <p>Gives a brief help text for functions in the dbg module. The
          available items can be listed with <c>dbg:h/0</c></p>
      </desc>
    </func>
    <func>
      <name since="">p(Item) -> {ok, MatchDesc} | {error, term()} </name>
      <fsummary>Trace messages to and from Item.</fsummary>
      <desc>
        <p>Equivalent to <c>p(Item, [m])</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">p(Item, Flags) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Trace Item according to Flags.</fsummary>
      <type>
        <v>MatchDesc = [MatchNum]</v>
        <v>MatchNum = {matched, node(), integer()} | {matched, node(), 0, RPCError}</v>
        <v>RPCError = term()</v>
      </type>
      <desc>
        <p>Traces <c>Item</c> in accordance to the value specified
          by <c>Flags</c>. The variation of <c>Item</c> is listed below:</p>
        <taglist>
          <tag><c>pid()</c> or <c>port()</c></tag>
          <item>The corresponding process or port is traced. The process or port may
           be a remote process or port (on another Erlang node). The node must
           be in the list of traced nodes (see <seealso marker="#n-1"><c>n/1</c></seealso>
           and <seealso marker="#tracer-3"><c>tracer/3</c></seealso>).</item>
          <tag><c>all</c></tag>
          <item>All processes and ports in the system as well as all processes and ports
           created hereafter are to be traced.</item>
          <tag><c>processes</c></tag>
          <item>All processes in the system as well as all processes created hereafter are to be traced.</item>
          <tag><c>ports</c></tag>
          <item>All ports in the system as well as all ports created hereafter are to be traced.</item>
          <tag><c>new</c></tag>
          <item>All processes and ports created after the call is are to be traced.</item>
          <tag><c>new_processes</c></tag>
          <item>All processes created after the call is are to be traced.</item>
          <tag><c>new_ports</c></tag>
          <item>All ports created after the call is are to be traced.</item>
          <tag><c>existing</c></tag>
          <item>All existing processes and ports are traced.</item>
          <tag><c>existing_processes</c></tag>
          <item>All existing processes are traced.</item>
          <tag><c>existing_ports</c></tag>
          <item>All existing ports are traced.</item>
          <tag><c>atom()</c></tag>
          <item>The process or port with the corresponding registered name is traced. The process or
           port may be a remote process (on another Erlang node). The node must be
           added with the <seealso marker="#n-1"><c>n/1</c></seealso> or
           <seealso marker="#tracer-3"><c>tracer/3</c></seealso> function.</item>
          <tag><c>integer()</c></tag>
          <item>The process <c><![CDATA[<0.Item.0>]]></c> is traced.</item>
          <tag><c>{X, Y, Z}</c></tag>
          <item>The process <c><![CDATA[<X.Y.Z>]]></c> is traced. </item>
              <tag><c>string()</c></tag>
              <item>If the <c>Item</c> is a string <![CDATA["<X.Y.Z>"]]>
                      as returned from <seealso marker="erts:erlang#pid_to_list-1"><c>pid_to_list/1</c></seealso>,
                      the process <c><![CDATA[<X.Y.Z>]]></c> is traced.
              </item>
          </taglist>

        <p>When enabling an <c>Item</c> that represents a group of processes,
        the <c>Item</c> is enabled on all nodes added with the
        <seealso marker="#n-1"><c>n/1</c></seealso> or
        <seealso marker="#tracer-3"><c>tracer/3</c></seealso> function.</p>

        <p><c>Flags</c> can be a single atom,
          or a list of flags. The available flags are:
          </p>
        <taglist>
          <tag><c>s (send)</c></tag>
          <item>
            <p>Traces the messages the process or port sends.</p>
          </item>
          <tag><c>r (receive)</c></tag>
          <item>
            <p>Traces the messages the process or port receives.</p>
          </item>
          <tag><c>m (messages)</c></tag>
          <item>
            <p>Traces the messages the process or port receives and sends.</p>
          </item>
          <tag><c>c (call)</c></tag>
          <item>
            <p>Traces global function calls for the process
              according to the trace patterns set in the system (see tp/2).</p>
          </item>
          <tag><c>p (procs)</c></tag>
          <item>
            <p>Traces process related events to the process.</p>
          </item>
          <tag><c>ports</c></tag>
          <item>
            <p>Traces port related events to the port.</p>
          </item>
          <tag><c>sos (set on spawn)</c></tag>
          <item>
            <p>Lets all processes created by the traced
              process inherit the trace flags 
              of the traced process.</p>
          </item>
          <tag><c>sol (set on link)</c></tag>
          <item>
            <p>Lets another process, <c>P2</c>, inherit the
              trace flags of the traced 
              process whenever the traced process links to <c>P2</c>.</p>
          </item>
          <tag><c>sofs (set on first spawn)</c></tag>
          <item>
            <p>This is the same as <c>sos</c>, but only 
              for the first process spawned by the traced process.</p>
          </item>
          <tag><c>sofl (set on first link)</c></tag>
          <item>
            <p>This is the same as <c>sol</c>, but only for
              the first call to
              <seealso marker="erts:erlang#link-1"><c>link/1</c></seealso> by the traced process.</p>
          </item>
          <tag><c>all</c></tag>
          <item>
            <p>Sets all flags except <c>silent</c>.</p>
          </item>
          <tag><c>clear</c></tag>
          <item>
            <p>Clears all flags.
              </p>
          </item>
        </taglist>
        <p>The list can also include any of the flags allowed in 
            <seealso marker="erts:erlang#trace-3"><c>erlang:trace/3</c></seealso></p>
        <p>The function returns either an error tuple or a tuple
          <c>{ok, List}</c>. The <c>List</c> consists of
          specifications of how many processes and ports that matched (in the
          case of a pure pid() exactly 1). The specification of
          matched processes is <c>{matched, Node, N}</c>. If the
          remote processor call,<c>rpc</c>, to a remote node fails,
          the <c>rpc</c> error message is delivered as a fourth
          argument and the number of matched processes are 0. Note
          that the result {ok, List} may contain a list where
          <c>rpc</c> calls to one, several or even all nodes failed.</p>
      </desc>
    </func>
    <func>
      <name since="">c(Mod, Fun, Args)</name>
      <fsummary>Evaluate <c>apply(M,F,Args)</c>with <c>all</c>trace flags set.</fsummary>
      <desc>
        <p>Equivalent to <c>c(Mod, Fun, Args, all)</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">c(Mod, Fun, Args, Flags)</name>
      <fsummary>Evaluate <c>apply(M,F,Args)</c>with <c>Flags</c>trace flags set.</fsummary>
      <desc>
        <p>Evaluates the expression <c>apply(Mod, Fun, Args)</c> with the trace
          flags in <c>Flags</c> set. This is a convenient way to trace processes 
          from the Erlang shell.</p>
      </desc>
    </func>
    <func>
      <name since="">i() -> ok</name>
      <fsummary>Display information about all traced processes and ports.</fsummary>
      <desc>
        <p>Displays information about all traced processes and ports.</p>
      </desc>
    </func>
    <func>
      <name since="">tp(Module,MatchSpec)</name>
      <fsummary>Set pattern for traced global function calls</fsummary>
      <desc>
        <p>Same as tp({Module, '_', '_'}, MatchSpec)</p>
      </desc>
    </func>
    <func>
      <name since="">tp(Module,Function,MatchSpec)</name>
      <fsummary>Set pattern for traced global function calls</fsummary>
      <desc>
        <p>Same as tp({Module, Function, '_'}, MatchSpec)</p>
      </desc>
    </func>
    <func>
      <name since="">tp(Module, Function, Arity, MatchSpec)</name>
      <fsummary>Set pattern for traced global function calls</fsummary>
      <desc>
        <p>Same as tp({Module, Function, Arity}, MatchSpec)</p>
      </desc>
    </func>
    <func>
      <name since="">tp({Module, Function, Arity}, MatchSpec) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Set pattern for traced global function calls</fsummary>
      <type>
        <v>Module = atom() | '_'</v>
        <v>Function = atom() | '_'</v>
        <v>Arity = integer() |'_'</v>
        <v>MatchSpec = integer() | Built-inAlias | [] | match_spec()</v>
	<v>Built-inAlias = x | c | cx</v>
        <v>MatchDesc = [MatchInfo]</v>
        <v>MatchInfo = {saved, integer()} | MatchNum</v>
        <v>MatchNum = {matched, node(), integer()} | {matched, node(), 0, RPCError}</v>
      </type>
      <desc>
        <p>This function enables call trace for one or more
          functions. All exported functions matching the <c>{Module, Function, Arity}</c>
          argument will be concerned, but the
          <c>match_spec()</c> may further narrow down the set of function
          calls generating trace messages.</p>
        <p>For a description of the <c>match_spec()</c> syntax,
          please turn to the
          <em>User's guide</em> part of the online
          documentation for the runtime system (<em>erts</em>). The
          chapter <seealso marker="erts:match_spec"><em>Match Specifications in Erlang</em></seealso>
          explains the general match specification "language".
          The most common generic match specifications used can be
          found as <c>Built-inAlias</c>', see
          <seealso marker="#ltp-0"><c>ltp/0</c></seealso> below for details.
          </p>
        <p>The Module, Function and/or Arity parts of the tuple may
          be specified as the atom <c>'_'</c> which is a "wild-card"
          matching all modules/functions/arities. Note, if the
          Module is specified as <c>'_'</c>, the Function and Arity
          parts have to be specified as '_' too. The same holds for the
          Functions relation to the Arity.</p>
        <p>All nodes added with <seealso marker="#n-1"><c>n/1</c></seealso> or
            <seealso marker="#tracer-3"><c>tracer/3</c></seealso> will
          be affected by this call, and if Module is not <c>'_'</c>
          the module will be loaded on all nodes.</p>
        <p>The function returns either an error tuple or a tuple
          <c>{ok, List}</c>. The <c>List</c> consists of specifications of how
          many functions that matched, in the same way as the processes and ports
          are presented in the return value of <seealso marker="#p-2"><c>p/2</c></seealso>. </p>
        <p>There may be a tuple <c>{saved, N}</c> in the return value,
          if the MatchSpec is other
          than []. The integer <c>N</c> may then be used in
          subsequent calls to this function and will stand as an
          "alias" for the given expression. There are also a couple of
          built-in aliases for common expressions, see
          <seealso marker="#ltp-0"><c>ltp/0</c></seealso> below for details.</p>
        <p>If an error is returned, it can be due to errors in
          compilation of the match specification. Such errors are
          presented as a list of tuples <c>{error, string()}</c> where
          the string is a textual explanation of the compilation
          error. An example:</p>
        <pre>
(x@y)4> <input>dbg:tp({dbg,ltp,0},[{[],[],[{message, two, arguments}, {noexist}]}]).</input>
{error,
 [{error,"Special form 'message' called with wrong number of
          arguments in {message,two,arguments}."},
  {error,"Function noexist/1 does_not_exist."}]}</pre>
      </desc>
    </func>
    <func>
      <name since="">tpl(Module,MatchSpec)</name>
      <fsummary>Set pattern for traced local (as well as global) function calls</fsummary>
      <desc>
        <p>Same as tpl({Module, '_', '_'}, MatchSpec)</p>
      </desc>
    </func>
    <func>
      <name since="">tpl(Module,Function,MatchSpec)</name>
      <fsummary>Set pattern for traced local (as well as global) function calls</fsummary>
      <desc>
        <p>Same as tpl({Module, Function, '_'}, MatchSpec)</p>
      </desc>
    </func>
    <func>
      <name since="">tpl(Module, Function, Arity, MatchSpec)</name>
      <fsummary>Set pattern for traced local (as well as global) function calls</fsummary>
      <desc>
        <p>Same as tpl({Module, Function, Arity}, MatchSpec)</p>
      </desc>
    </func>
    <func>
      <name since="">tpl({Module, Function, Arity}, MatchSpec) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Set pattern for traced local (as well as global) function calls</fsummary>
      <desc>
          <p>This function works as <seealso marker="#tp-2"><c>tp/2</c></seealso>, but enables
          tracing for local calls (and local functions) as well as for
          global calls (and functions).</p>
      </desc>
    </func>


    <func>
      <name since="OTP 19.0">tpe(Event, MatchSpec) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Set pattern for traced event</fsummary>
      <type>
	<v>Event = send | 'receive'</v>
        <v>MatchSpec = integer() | Built-inAlias | [] | match_spec()</v>
	<v>Built-inAlias = x | c | cx</v>
        <v>MatchDesc = [MatchInfo]</v>
        <v>MatchInfo = {saved, integer()} | MatchNum</v>
        <v>MatchNum = {matched, node(), 1} | {matched, node(), 0, RPCError}</v>
      </type>
      <desc>
        <p>This function associates a match specification with trace event
	  <c>send</c> or <c>'receive'</c>. By default all executed <c>send</c>
	  and <c>'receive'</c> events are traced if enabled for a process.
	  A match specification can be used to filter traced events
	  based on sender, receiver and/or message content.</p>
        <p>For a description of the <c>match_spec()</c> syntax,
          please turn to the <em>User's guide</em> part of the online
          documentation for the runtime system (<em>erts</em>). The
          chapter <seealso marker="erts:match_spec"><em>Match Specifications in Erlang</em></seealso>
          explains the general match specification "language".</p>
	<p>For <c>send</c>, the matching is done on the list <c>[Receiver, Msg]</c>.
	  <c>Receiver</c> is the process or port identity of the receiver and
	  <c>Msg</c> is the message term. The pid of the sending process can be
	  accessed with the guard function <c>self/0</c>.</p>
	<p>For <c>'receive'</c>, the matching is done on the list <c>[Node, Sender, Msg]</c>.
	  <c>Node</c> is the node name of the sender. <c>Sender</c> is the
	  process or port identity of the sender, or the atom
	  <c>undefined</c> if the sender is not known (which may
	  be the case for remote senders). <c>Msg</c> is the
	  message term. The pid of the receiving process can be
	  accessed with the guard function <c>self/0</c>.</p>
        <p>All nodes added with <seealso marker="#n-1"><c>n/1</c></seealso> or
          <seealso marker="#tracer-3"><c>tracer/3</c></seealso> will
          be affected by this call.</p>
        <p>The return value is the same as for
	  <seealso marker="#tp-2"><c>tp/2</c></seealso>. The number of matched
	  events are never larger than 1 as <c>tpe/2</c> does not
	  accept any form of wildcards for argument <c>Event</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">ctp()</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctp({'_', '_', '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctp(Module)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctp({Module, '_', '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctp(Module, Function)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctp({Module, Function, '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctp(Module, Function, Arity)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctp({Module, Function, Arity})</p>
      </desc>
    </func>
    <func>
      <name since="">ctp({Module, Function, Arity}) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <type>
        <v>Module = atom() | '_'</v>
        <v>Function = atom() | '_'</v>
        <v>Arity = integer() | '_'</v>
        <v>MatchDesc = [MatchNum]</v>
        <v>MatchNum = {matched, node(), integer()} | {matched, node(), 0, RPCError}</v>
      </type>
      <desc>
        <p>This function disables call tracing on the specified
          functions. The semantics of the parameter is the same
          as for the corresponding function specification in
          <seealso marker="#tp-2"><c>tp/2</c></seealso> or <seealso marker="#tpl-2"><c>tpl/2</c></seealso>. Both local and global call trace
          is disabled. </p>
        <p>The return value reflects how many functions that matched,
            and is constructed as described in <seealso marker="#tp-2"><c>tp/2</c></seealso>. No tuple
          <c>{saved, N}</c> is however ever returned (for obvious reasons).</p>
      </desc>
    </func>
    <func>
      <name since="">ctpl()</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpl({'_', '_', '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpl(Module)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpl({Module, '_', '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpl(Module, Function)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpl({Module, Function, '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpl(Module, Function, Arity)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpl({Module, Function, Arity})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpl({Module, Function, Arity}) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
          <p>This function works as <seealso marker="#ctp-1"><c>ctp/1</c></seealso>, but only disables
              tracing set up with <seealso marker="#tpl-2"><c>tpl/2</c></seealso>
              (not with <seealso marker="#tp-2"><c>tp/2</c></seealso>).</p>
      </desc>
    </func>
    <func>
      <name since="">ctpg()</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpg({'_', '_', '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpg(Module)</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpg({Module, '_', '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpg(Module, Function)</name>
      <fsummary>>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpg({Module, Function, '_'})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpg(Module, Function, Arity)</name>
      <fsummary>>Clear call trace pattern for the specified functions</fsummary>
      <desc>
        <p>Same as ctpg({Module, Function, Arity})</p>
      </desc>
    </func>
    <func>
      <name since="">ctpg({Module, Function, Arity}) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Clear call trace pattern for the specified functions</fsummary>
      <desc>
          <p>This function works as <seealso marker="#ctp-1"><c>ctp/1</c></seealso>, but only disables
              tracing set up with <seealso marker="#tp-2"><c>tp/2</c></seealso>
              (not with <seealso marker="#tpl-2"><c>tpl/2</c></seealso>).</p>
      </desc>
    </func>
    <func>
      <name since="OTP 19.0">ctpe(Event) -> {ok, MatchDesc} | {error, term()}</name>
      <fsummary>Clear trace pattern for the specified event</fsummary>
      <type>
        <v>Event = send | 'receive'</v>
        <v>MatchDesc = [MatchNum]</v>
        <v>MatchNum = {matched, node(), 1} | {matched, node(), 0, RPCError}</v>
      </type>
      <desc>
        <p>This function clears match specifications for the specified
	  trace event (<c>send</c> or <c>'receive'</c>). It will revert back
	  to the default behavior of tracing all triggered events.</p>
        <p>The return value follow the same style as for
	  <seealso marker="#ctp-1"><c>ctp/1</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name since="">ltp() -> ok</name>
      <fsummary>List saved and built-in match specifications on the console.</fsummary>
      <desc>
        <p>Use this function to recall all match specifications previously
          used in the session (i. e. previously saved during calls
          to <seealso marker="#tp-2"><c>tp/2</c></seealso>, and built-in match specifications.
          This is very useful, as a complicated
          match_spec can be quite awkward to write. Note that the
          match specifications are lost if <seealso marker="#stop-0"><c>stop/0</c></seealso> is called.</p>
        <p>Match specifications used can be saved in a file (if a
          read-write file system is present) for use in later
          debugging sessions, see <seealso marker="#wtp-1"><c>wtp/1</c></seealso>
          and <seealso marker="#rtp-1"><c>rtp/1</c></seealso></p>
	<p>There are three built-in trace patterns:
	  <c>exception_trace</c>, <c>caller_trace</c> 
	  and <c>caller_exception_trace</c> (or <c>x</c>, <c>c</c> and 
	  <c>cx</c> respectively). 
	  Exception trace sets a trace which will show function names, 
	  parameters, return values and exceptions thrown from functions. 
	  Caller traces display function names, parameters and information 
	  about which function called it. An example using a built-in alias:</p>
	  <pre>
(x@y)4> <input>dbg:tp(lists,sort,cx).</input>
{ok,[{matched,nonode@nohost,2},{saved,cx}]}
(x@y)4> <input>lists:sort([2,1]).</input>
(&lt;0.32.0&gt;) call lists:sort([2,1]) ({erl_eval,do_apply,5})
(&lt;0.32.0&gt;) returned from lists:sort/1 -> [1,2]
[1,2]</pre>
      </desc>
    </func>
    <func>
      <name since="">dtp() -> ok</name>
      <fsummary>Delete all saved match specifications.</fsummary>
      <desc>
        <p>Use this function to "forget" all match specifications
            saved during calls to <seealso marker="#tp-2"><c>tp/2</c></seealso>.
            This is useful when one wants to restore other match
            specifications from a file with <seealso marker="#rtp-1"><c>rtp/1</c></seealso>. Use
            <seealso marker="#dtp-1"><c>dtp/1</c></seealso> to delete specific saved match specifications.</p>
      </desc>
    </func>
    <func>
      <name since="">dtp(N) -> ok</name>
      <fsummary>Delete a specific saved match_spec.</fsummary>
      <type>
        <v>N = integer()</v>
      </type>
      <desc>
        <p>Use this function to "forget" a specific match specification
            saved during calls to <seealso marker="#tp-2"><c>tp/2</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name since="">wtp(Name) -> ok | {error, IOError}</name>
      <fsummary>Write all saved and built-in match specifications to a file</fsummary>
      <type>
        <v>Name = string()</v>
        <v>IOError = term()</v>
      </type>
      <desc>
        <p>This function will save all match specifications saved
            during the session (during calls to <seealso marker="#tp-2"><c>tp/2</c></seealso>)
          and built-in match specifications in a text
          file with the name designated by <c>Name</c>. The format
          of the file is textual, why it can be edited with an
          ordinary text editor, and then restored with
          <seealso marker="#rtp-1"><c>rtp/1</c></seealso>. </p>
        <p>Each match spec in the file ends with a full stop
          (<c>.</c>) and new (syntactically correct) match
          specifications can be added to the file manually.</p>
        <p>The function returns <c>ok</c> or an error tuple where the
          second element contains the I/O error that made the
          writing impossible.</p>
      </desc>
    </func>
    <func>
      <name since="">rtp(Name) -> ok | {error, Error}</name>
      <fsummary>Read saved match specifications from file.</fsummary>
      <type>
        <v>Name = string()</v>
        <v>Error = term()</v>
      </type>
      <desc>
        <p>This function reads match specifications from a file
           (possibly) generated by the <seealso marker="#wtp-1"><c>wtp/1</c></seealso>
           function. It checks
          the syntax of all match specifications and verifies that
          they are correct. The error handling principle is "all or
          nothing", i. e. if some of the match specifications are
          wrong, none of the specifications are added to the list of
          saved match specifications for the running system. </p>
        <p>The match specifications in the file are <em>merged</em>
          with the current match specifications, so that no duplicates
          are generated. Use <seealso marker="#ltp-0"><c>ltp/0</c></seealso>
          to see what numbers were
          assigned to the specifications from the file.</p>
        <p>The function will return an error, either due to I/O
          problems (like a non existing or non readable file) or due
          to file format problems. The errors from a bad format file
          are in a more or less textual format, which will give a hint
          to what's causing the problem.
        </p>
      </desc>
    </func>
    <func>
      <name since="">n(Nodename) -> {ok, Nodename} | {error, Reason}</name>
      <fsummary>Add a remote node to the list of traced nodes</fsummary>
      <type>
        <v>Nodename = atom()</v>
        <v>Reason = term()</v>
      </type>
      <desc>
        <p>The <c>dbg</c> server keeps a list of nodes where tracing
            should be performed. Whenever a <seealso marker="#tp-2"><c>tp/2</c></seealso> call or a
            <seealso marker="#p-2"><c>p/2</c></seealso> call is made, it is executed for all nodes in this
            list including the local node (except for <seealso marker="#p-2"><c>p/2</c></seealso> with a
          specific <c>pid()</c> or <c>port()</c> as first argument, in which case the
          command is executed only on the node where the designated
          process or port resides).
          </p>
        <p>This function adds a remote node (<c>Nodename</c>) to the
          list of nodes where tracing is performed. It starts a tracer
          process on the remote node, which will send all trace messages
          to the tracer process on the local node (via the Erlang
          distribution). If no tracer process is running on the local
          node, the error reason <c>no_local_tracer</c> is returned. The
          tracer process on the local node must be started with the
          <seealso marker="#tracer-2"><c>tracer/0/2</c></seealso> function.
          </p>
        <p>If <c>Nodename</c> is the local node, the error reason
          <c>cant_add_local_node</c> is returned.
          </p>
        <p>If a trace port (see <seealso marker="#trace_port-2"><c>trace_port/2</c></seealso>) is
          running on the local node, remote nodes cannot be traced with
          a tracer process. The error reason
          <c>cant_trace_remote_pid_to_local_port</c> is returned. A
          trace port can however be started on the remote node with the
          <seealso marker="#tracer-3"><c>tracer/3</c></seealso> function.
          </p>
        <p>The function will also return an error if the node
          <c>Nodename</c> is not reachable.</p>
      </desc>
    </func>
    <func>
      <name since="">cn(Nodename) -> ok</name>
      <fsummary>Clear a node from the list of traced nodes.</fsummary>
      <type>
        <v>Nodename = atom()</v>
      </type>
      <desc>
        <p>Clears a node from the list of traced nodes. Subsequent
            calls to <seealso marker="#tp-2"><c>tp/2</c></seealso> and
            <seealso marker="#p-2"><c>p/2</c></seealso> will not consider that
            node, but tracing already activated on the node will continue
            to be in effect.</p>
        <p>Returns <c>ok</c>, cannot fail.</p>
      </desc>
    </func>
    <func>
      <name since="">ln() -> ok</name>
      <fsummary>Show the list of traced nodes on the console.</fsummary>
      <desc>
        <p>Shows the list of traced nodes on the console.</p>
      </desc>
    </func>
    <func>
      <name since="">tracer() -> {ok, pid()} | {error, already_started}</name>
      <fsummary>Start a tracer server that handles trace messages.</fsummary>
      <desc>
        <p>This function starts a server on the local node that will
          be the recipient of all trace messages. All subsequent calls
          to <seealso marker="#p-2"><c>p/2</c></seealso> will result in messages sent to the newly
          started trace server.</p>
        <p>A trace server started in this way will simply display the
          trace messages in a formatted way in the Erlang shell
          (i. e. use io:format). See <seealso marker="#tracer-2"><c>tracer/2</c></seealso>
          for a description of how the trace message handler can be customized.
        </p>
        <p>To start a similar tracer on a remote node, use <seealso marker="#n-1"><c>n/1</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name since="">tracer(Type, Data) -> {ok, pid()} | {error, Error}</name>
      <fsummary>Start a tracer server with additional parameters</fsummary>
      <type>
        <v>Type = port | process | module</v>
        <v>Data = PortGenerator | HandlerSpec | ModuleSpec</v>
        <v>PortGenerator = fun() (no arguments)</v>
        <v>Error = term()</v>
        <v>HandlerSpec = {HandlerFun, InitialData}</v>
        <v>HandlerFun = fun() (two arguments)</v>
        <v>ModuleSpec = fun() (no arguments) | {TracerModule, TracerState}</v>
        <v>TracerModule = atom()</v>
        <v>InitialData = TracerState = term()</v>
      </type>
      <desc>
        <p>This function starts a tracer server with additional
          parameters on the local node. The first parameter, the
          <c>Type</c>, indicates if trace messages should be handled
          by a receiving process (<c>process</c>), by a tracer port
          (<c>port</c>) or by a tracer module
          (<c>module</c>). For a description about tracer ports see
          <seealso marker="#trace_port-2"><c>trace_port/2</c></seealso>
          and for a tracer modules see
          <seealso marker="erts:erl_tracer"><c>erl_tracer</c></seealso>.
          </p>
        <p>If <c>Type</c> is <c>process</c>, a message handler function can
          be specified (<c>HandlerSpec</c>). The handler function, which
          should be a <c>fun</c> taking two arguments, will be called
          for each trace message, with the first argument containing the
          message as it is and the second argument containing the return
          value from the last invocation of the fun. The initial value
          of the second parameter is specified in the <c>InitialData</c>
          part of the <c>HandlerSpec</c>. The <c>HandlerFun</c> may
          choose any appropriate action to take when invoked, and can
          save a state for the next invocation by returning it.
          </p>
        <p>If <c>Type</c> is <c>port</c>, then the second parameter should
          be a <em>fun</em> which takes no arguments and returns a
          newly opened trace port when called. Such a <em>fun</em> is
          preferably generated by calling <seealso marker="#trace_port-2"><c>trace_port/2</c></seealso>.
          </p>
        <p>if <c>Type</c> is <c>module</c>, then the second parameter should
            be either a tuple describing the <seealso marker="erts:erl_tracer"><c>erl_tracer</c></seealso>
          module to be used for tracing and the state to be used for
          that tracer module or a fun returning the same tuple.</p>
        <p>If an error is returned, it can either be due to a tracer
          server already running (<c>{error,already_started}</c>) or
          due to the <c>HandlerFun</c> throwing an exception.
          </p>
        <p>To start a similar tracer on a remote node, use
            <seealso marker="#tracer-3"><c>tracer/3</c></seealso>.
        </p>
      </desc>
    </func>
    <func>
      <name since="">tracer(Nodename, Type, Data) -> {ok, Nodename} | {error, Reason}</name>
      <fsummary>Start a tracer server on given node with additional parameters</fsummary>
      <type>
        <v>Nodename = atom()</v>
      </type>
      <desc>
          <p>This function is equivalent to <seealso marker="#tracer-2"><c>tracer/2</c></seealso>, but acts on
          the given node. A tracer is started on the node
          (<c>Nodename</c>) and the node is added to the list of traced nodes.
          </p>
        <note>
            <p>This function is not equivalent to <seealso marker="#n-1"><c>n/1</c></seealso>. While
                <seealso marker="#n-1"><c>n/1</c></seealso> starts a process tracer which redirects all trace
            information to a process tracer on the local node (i.e. the
            trace control node), <seealso marker="#tracer-3"><c>tracer/3</c></seealso> starts a tracer of any
            type which is independent of the tracer on the trace control
            node.</p>
        </note>
        <p>For details, see <seealso marker="#tracer-2"><c>tracer/2</c></seealso>.</p>
      </desc>
    </func>
    <func>
      <name since="">trace_port(Type, Parameters) -> fun()</name>
      <fsummary>Create and returns a trace port generating<em>fun</em></fsummary>
      <type>
        <v>Type = ip | file</v>
        <v>Parameters = Filename | WrapFilesSpec | IPPortSpec</v>
        <v>Filename = string() | [string()] | atom()</v>
        <v>WrapFilesSpec = {Filename, wrap, Suffix} | {Filename, wrap, Suffix, WrapSize} | {Filename, wrap, Suffix, WrapSize, WrapCnt}</v>
        <v>Suffix = string()</v>
        <v>WrapSize = integer() >= 0 | {time, WrapTime}</v>
        <v>WrapTime = integer() >= 1</v>
        <v>WrapCnt = integer() >= 1</v>
        <v>IpPortSpec = PortNumber | {PortNumber, QueSize}</v>
        <v>PortNumber = integer()</v>
        <v>QueSize = integer()</v>
      </type>
      <desc>
        <p>This function creates a trace port generating <em>fun</em>.
          The <em>fun</em> takes no arguments and returns a newly opened
          trace port. The return value from this function is suitable as
          a second parameter to tracer/2, i.e. <c>dbg:tracer(port, dbg:trace_port(ip, 4711))</c>. </p>
        <p>A trace port is an
          Erlang port to a dynamically linked in driver that handles
          trace messages directly, without the overhead of sending them
          as messages in the Erlang virtual machine.</p>
        <p>Two trace drivers are currently implemented, the
          <c>file</c> and the <c>ip</c> trace drivers. The file driver
          sends all trace messages into one or several binary files, 
          from where they later can be fetched and processed with the
          <seealso marker="#trace_client-2"><c>trace_client/2</c></seealso> function. The ip driver opens a TCP/IP
          port where it listens for connections. When a client
          (preferably started by calling <seealso marker="#trace_client-2"><c>trace_client/2</c></seealso> on
          another Erlang node) connects, all trace messages are sent
          over the IP network for further processing by the remote
          client. </p>
        <p>Using a trace port significantly lowers the overhead
          imposed by using tracing.</p>
        <p>The file trace driver expects a filename or a wrap files 
          specification as parameter. A file is written with a high
          degree of buffering, why all trace messages are <em>not</em>
          guaranteed to be saved in the file in case of a system
          crash. That is the price to pay for low tracing overhead.</p>
        <p>A wrap files specification is used to limit the disk
          space consumed by the trace. The trace is written to a
          limited number of files each with a limited size. 
          The actual filenames are <c>Filename ++ SeqCnt ++ Suffix</c>, where <c>SeqCnt</c> counts as a decimal string
          from <c>0</c> to <c>WrapCnt</c> and then around again from
          <c>0</c>. When a trace term written to 
          the current file makes it longer than <c>WrapSize</c>,
          that file is closed, if the number of files in this 
          wrap trace is as many as <c>WrapCnt</c> the oldest file
          is deleted then a new file is opened to become the current.
          Thus, when a wrap trace has been stopped, there are at most
          <c>WrapCnt</c> trace files saved with a size of at least
          <c>WrapSize</c> (but not much bigger), except for 
          the last file that might even be empty. The default values
          are <c>WrapSize = 128*1024</c> and <c>WrapCnt = 8</c>.</p>
        <p>The <c>SeqCnt</c> values in the filenames are all in the
          range <c>0</c> through <c>WrapCnt</c> with a gap in the
          circular sequence. The gap is needed to find the end of the
          trace.</p>
        <p>If the <c>WrapSize</c> is specified as 
          <c>{time, WrapTime}</c>, the current file is closed when it
          has been open more than <c>WrapTime</c> milliseconds,
          regardless of it being empty or not.</p>
        <p>The ip trace driver has a queue of <c>QueSize</c> messages
          waiting to be delivered. If the driver cannot deliver messages
          as fast as they are produced by the runtime system, a special
          message is sent, which indicates how many messages that are
          dropped. That message will arrive at the handler function
          specified in <seealso marker="#trace_client-3"><c>trace_client/3</c></seealso>
          as the tuple <c>{drop, N}</c> where <c>N</c> is the number of consecutive messages
          dropped. In case of heavy tracing, drop's are likely to occur,
          and they surely occur if no client is reading the trace
          messages. The default value of <c>QueSize</c> is 200.</p>
      </desc>
    </func>
    <func>
      <name since="">flush_trace_port()</name>
      <fsummary>Equivalent to flush_trace_port(node()).</fsummary>
      <desc>
        <p>Equivalent to <c>flush_trace_port(node())</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">flush_trace_port(Nodename) -> ok | {error, Reason}</name>
      <fsummary>Flush internal data buffers in a trace driver on the given node.</fsummary>
      <desc>
        <p>Equivalent to <c>trace_port_control(Nodename,flush)</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">trace_port_control(Operation)</name>
      <fsummary>Equivalent to trace_port_control(node(),Operation).</fsummary>
      <desc>
        <p>Equivalent to <c>trace_port_control(node(),Operation)</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">trace_port_control(Nodename,Operation) ->  ok | {ok, Result} | {error, Reason}</name>
      <fsummary>Perform a control operation on the active trace port driver on the given node.</fsummary>
      <type>
        <v>Nodename = atom()</v>
      </type>
      <desc>
        <p>This function is used to do a control operation on the
          active trace port driver on the given node
          (<c>Nodename</c>). Which operations are allowed as well
          as their return values depend on which trace driver
          is used.</p>
        <p>Returns either <c>ok</c> or <c>{ok, Result}</c> 
          if the operation was successful, or <c>{error, Reason}</c> 
          if the current tracer is a process 
          or if it is a port not supporting the operation.</p>
        <p>The allowed values for <c>Operation</c> are:</p>
        <taglist>
          <tag><c>flush</c></tag>
          <item>
            <p>This function is used to flush the internal buffers 
              held by a trace port driver. Currently only the 
              file trace driver supports this operation. 
              Returns <c>ok</c>.</p>
          </item>
          <tag><c>get_listen_port</c></tag>
          <item>
            <p>Returns <c>{ok, IpPort}</c> where <c>IpPort</c> is
              the IP port number used by the driver listen socket.
              Only the ip trace driver supports this operation.</p>
          </item>
        </taglist>
      </desc>
    </func>
    <func>
      <name since="">trace_client(Type, Parameters) -> pid()</name>
      <fsummary>Start a trace client that reads messages created by a trace port driver</fsummary>
      <type>
        <v>Type = ip | file | follow_file</v>
        <v>Parameters = Filename | WrapFilesSpec | IPClientPortSpec</v>
        <v>Filename = string() | [string()] | atom()</v>
        <v>WrapFilesSpec = see trace_port/2</v>
        <v>Suffix = string()</v>
        <v>IpClientPortSpec = PortNumber | {Hostname, PortNumber}</v>
        <v>PortNumber = integer()</v>
        <v>Hostname = string()</v>
      </type>
      <desc>
        <p>This function starts a trace client that reads the output
          created by a trace port driver and handles it in mostly the
          same way as a tracer process created by the
          <seealso marker="#tracer-0"><c>tracer/0</c></seealso> function.</p>
        <p>If <c>Type</c> is <c>file</c>, the client reads all trace
          messages stored in the file named <c>Filename</c> or 
          specified by <c>WrapFilesSpec</c> (must be the same as used
          when creating the trace, see trace_port/2)
          and let's the default handler function format the
          messages on the console. This is one way to interpret the data
          stored in a file by the file trace port driver.</p>
        <p>If <c>Type</c> is <c>follow_file</c>, the client behaves as
          in the <c>file</c> case, but keeps trying to read (and
          process) more data
          from the file until stopped by <seealso marker="#stop_trace_client-1"><c>stop_trace_client/1</c></seealso>.
          <c>WrapFilesSpec</c> is not allowed as second argument 
          for this <c>Type</c>.</p>
        <p>If <c>Type</c> is <c>ip</c>, the client connects to the
          TCP/IP port <c>PortNumber</c> on the host <c>Hostname</c>,
          from where it reads trace messages until the TCP/IP connection
          is closed. If no <c>Hostname</c> is specified, the local host
          is assumed.</p>
        <p>As an example, one can let trace messages be sent over the
          network to another Erlang node (preferably <em>not</em>
          distributed), where the formatting occurs:</p>
        <p>On the node <c>stack</c> there's an Erlang node
          <c>ant@stack</c>, in the shell, type the following:</p>
        <pre>
ant@stack> <input>dbg:tracer(port, dbg:trace_port(ip,4711)).</input>
&lt;0.17.0>
ant@stack> <input>dbg:p(self(), send).</input>
{ok,1}</pre>
        <p>All trace messages are now sent to the trace port driver,
          which in turn listens for connections on the TCP/IP port
          4711. If we want to see the messages on another node,
          preferably on another host, we do like this:</p>
        <pre>
-> <input>dbg:trace_client(ip, {"stack", 4711}).</input>
&lt;0.42.0></pre>
        <p>If we now send a message from the shell on the node
          <c>ant@stack</c>, where all sends from the shell are traced:</p>
        <pre>
ant@stack> <input>self() ! hello.</input>
hello</pre>
        <p>The following will appear at the console on the node that
          started the trace client:</p>
        <pre>
(&lt;0.23.0>) &lt;0.23.0> ! hello
(&lt;0.23.0>) &lt;0.22.0> ! {shell_rep,&lt;0.23.0>,{value,hello,[],[]}}</pre>
        <p>The last line is generated due to internal message passing
          in the Erlang shell. The process id's will vary.</p>
      </desc>
    </func>
    <func>
      <name since="">trace_client(Type, Parameters, HandlerSpec) -> pid()</name>
      <fsummary>Start a trace client that reads messages created by a trace port driver, with a user defined handler</fsummary>
      <type>
        <v>Type = ip | file | follow_file</v>
        <v>Parameters = Filename | WrapFilesSpec | IPClientPortSpec</v>
        <v>Filename = string() | [string()] | atom()</v>
        <v>WrapFilesSpec = see trace_port/2</v>
        <v>Suffix = string()</v>
        <v>IpClientPortSpec = PortNumber | {Hostname, PortNumber}</v>
        <v>PortNumber = integer()</v>
        <v>Hostname = string()</v>
        <v>HandlerSpec = {HandlerFun, InitialData}</v>
        <v>HandlerFun = fun() (two arguments)</v>
        <v>InitialData = term()</v>
      </type>
      <desc>
          <p>This function works exactly as <seealso marker="#trace_client-2"><c>trace_client/2</c></seealso>,
          but allows you to write your own handler function. The handler
          function works mostly as the one described in
          <seealso marker="#tracer-2"><c>tracer/2</c></seealso>, but will also have to be prepared to handle
          trace messages of the form <c>{drop, N}</c>, where <c>N</c> is
          the number of dropped messages. This pseudo trace message will
          only occur if the ip trace driver is used.</p>
        <p>For trace type <c>file</c>, the pseudo trace message
          <c>end_of_trace</c> will appear at the end of the trace. The
          return value from the handler function is in this case
          ignored.</p>
      </desc>
    </func>
    <func>
      <name since="">stop_trace_client(Pid) -> ok</name>
      <fsummary>Stop a trace client gracefully.</fsummary>
      <type>
        <v>Pid = pid()</v>
      </type>
      <desc>
        <p>This function shuts down a previously started trace
          client. The <c>Pid</c> argument is the process id returned
          from the <seealso marker="#trace_client-2"><c>trace_client/2</c></seealso>
          or <seealso marker="#trace_client-3"><c>trace_client/3</c></seealso> call.</p>
      </desc>
    </func>
    <func>
      <name since="">get_tracer()</name>
      <fsummary>Equivalent to get_tracer(node()).</fsummary>
      <desc>
        <p>Equivalent to <c>get_tracer(node())</c>.</p>
      </desc>
    </func>
    <func>
      <name since="">get_tracer(Nodename) -> {ok, Tracer}</name>
      <fsummary>Return the process or port to which all trace messages are sent.</fsummary>
      <type>
        <v>Nodename = atom()</v>
        <v>Tracer = port() | pid() | {module(), term()}</v>
      </type>
      <desc>
        <p>Returns the process, port or tracer module to which all trace
          messages are sent.</p>
      </desc>
    </func>
    <func>
      <name since="">stop() -> ok</name>
      <fsummary>Stop the <c>dbg</c>server and the tracing of all processes.</fsummary>
      <desc>
        <p>Stops the <c>dbg</c> server and clears all trace flags for
          all processes and all local trace patterns for all functions. Also
          shuts down all trace clients and closes all trace ports.</p>
        <p>Note that no global trace patterns are affected by this
          function.</p>
      </desc>
    </func>
    <func>
      <name since="">stop_clear() -> ok</name>
      <fsummary>Stop the <c>dbg</c>server and the tracing of all processes, and clears trace patterns.</fsummary>
      <desc>
        <p>Same as stop/0, but also clears all trace patterns on global functions calls.</p>
      </desc>
    </func>
  </funcs>

  <section>
    <marker id="simple_example"></marker>
    <title>Simple examples - tracing from the shell</title>
    <p>The simplest way of tracing from the Erlang shell is to use
      <c>dbg:c/3</c> or <c>dbg:c/4</c>, e.g. tracing the function
      <c>dbg:get_tracer/0</c>:</p>
    <pre>
(tiger@durin)84> <input>dbg:c(dbg,get_tracer,[]).</input>
(&lt;0.154.0>) &lt;0.152.0> ! {&lt;0.154.0>,{get_tracer,tiger@durin}}
(&lt;0.154.0>) out {dbg,req,1}
(&lt;0.154.0>) &lt;&lt; {dbg,{ok,&lt;0.153.0>}}
(&lt;0.154.0>) in {dbg,req,1}
(&lt;0.154.0>) &lt;&lt; timeout
{ok,&lt;0.153.0>}
(tiger@durin)85></pre>
    <p>Another way of tracing from the shell is to explicitly start a
      <em>tracer</em> and then set the <em>trace flags</em> of your
      choice on the processes you want to trace, e.g. trace messages and
      process events:</p>
    <pre>
(tiger@durin)66> <input>Pid = spawn(fun() -> receive {From,Msg} -> From ! Msg end end).</input>
&lt;0.126.0>
(tiger@durin)67> <input>dbg:tracer().</input>
{ok,&lt;0.128.0>}
(tiger@durin)68> <input>dbg:p(Pid,[m,procs]).</input>
{ok,[{matched,tiger@durin,1}]}
(tiger@durin)69> <input>Pid ! {self(),hello}.</input>
(&lt;0.126.0>) &lt;&lt; {&lt;0.116.0>,hello}
{&lt;0.116.0>,hello}
(&lt;0.126.0>) &lt;&lt; timeout
(&lt;0.126.0>) &lt;0.116.0> ! hello
(&lt;0.126.0>) exit normal
(tiger@durin)70> <input>flush().</input>
Shell got hello
ok
(tiger@durin)71></pre>
    <p>If you set the <c>call</c> trace flag, you also have to set a
      <em>trace pattern</em> for the functions you want to trace:</p>
    <pre>
(tiger@durin)77> <input>dbg:tracer().</input>
{ok,&lt;0.142.0>}
(tiger@durin)78> <input>dbg:p(all,call).</input>
{ok,[{matched,tiger@durin,3}]}
(tiger@durin)79> <input>dbg:tp(dbg,get_tracer,0,[]).</input>
{ok,[{matched,tiger@durin,1}]}
(tiger@durin)80> <input>dbg:get_tracer().</input>
(&lt;0.116.0>) call dbg:get_tracer()
{ok,&lt;0.143.0>}
(tiger@durin)81> <input>dbg:tp(dbg,get_tracer,0,[{'_',[],[{return_trace}]}]).</input>
{ok,[{matched,tiger@durin,1},{saved,1}]}
(tiger@durin)82> <input>dbg:get_tracer().</input>
(&lt;0.116.0>) call dbg:get_tracer()
(&lt;0.116.0>) returned from dbg:get_tracer/0 -> {ok,&lt;0.143.0>}
{ok,&lt;0.143.0>}
(tiger@durin)83></pre>
  </section>

  <section>
    <marker id="advanced"></marker>
    <title>Advanced topics - combining with seq_trace</title>
    <p>The <c>dbg</c> module is primarily targeted towards
      tracing through the <c>erlang:trace/3</c> function. It is
      sometimes desired to trace messages in a more delicate way, which
      can be done with the help of the <c>seq_trace</c> module. 
      </p>
    <p><c>seq_trace</c> implements sequential tracing (known in the
      AXE10 world, and sometimes called "forlopp tracing"). <c>dbg</c>
      can interpret messages generated from <c>seq_trace</c> and the
      same tracer function for both types of tracing can be used. The
      <c>seq_trace</c> messages can even be sent to a trace port for
      further analysis.
      </p>
    <p>As a match specification can turn on sequential tracing, the
      combination of <c>dbg</c> and <c>seq_trace</c> can be quite
      powerful.  This brief example shows a session where sequential
      tracing is used:</p>
    <pre>
1> <input>dbg:tracer().</input>
{ok,&lt;0.30.0>}
2> <input>{ok, Tracer} = dbg:get_tracer().</input>
{ok,&lt;0.31.0>}
3> <input>seq_trace:set_system_tracer(Tracer).</input>
false
4> <input>dbg:tp(dbg, get_tracer, 0, [{[],[],[{set_seq_token, send, true}]}]).</input>
{ok,[{matched,nonode@nohost,1},{saved,1}]}
5> <input>dbg:p(all,call).</input>
{ok,[{matched,nonode@nohost,22}]}
6> <input>dbg:get_tracer(), seq_trace:set_token([]).</input>
(&lt;0.25.0>) call dbg:get_tracer()
SeqTrace [0]: (&lt;0.25.0>) &lt;0.30.0> ! {&lt;0.25.0>,get_tracer} [Serial: {2,4}]
SeqTrace [0]: (&lt;0.30.0>) &lt;0.25.0> ! {dbg,{ok,&lt;0.31.0>}} [Serial: {4,5}]
{1,0,5,&lt;0.30.0>,4}</pre>
    <p>This session sets the system_tracer to the same process as
      the ordinary tracer process (i. e. &lt;0.31.0&gt;) and sets the
      trace pattern for the function <c>dbg:get_tracer</c> to one that
      has the action of setting a sequential token. When the function
      is called by a traced process (all processes are traced in this
      case), the process gets "contaminated" by the token and
      <c>seq_trace</c> messages are sent both for the server request
      and the response. The <c>seq_trace:set_token([])</c> after the
      call clears the <c>seq_trace</c> token, why no messages are sent
      when the answer propagates via the shell to the console port. 
      The output would otherwise have been more noisy.</p>
  </section>

  <section>
    <title>Note of caution</title>
    <p>When tracing function calls on a group leader process (an IO process), there is risk 
      of causing a deadlock. This will happen if a group leader process generates a trace 
      message and the tracer process, by calling the trace handler function, sends an IO 
      request to the same group leader. The problem can only occur if the trace handler 
      prints to tty using an <c>io</c> function such as <seealso marker="stdlib:io#format-2"><c>format/2</c></seealso>.
      Note that when
      <c>dbg:p(all,call)</c> is called, IO processes are also traced.
      Here's an example:</p>
    <pre>
%% Using a default line editing shell
1> <input>dbg:tracer(process, {fun(Msg,_) -> io:format("~p~n", [Msg]), 0 end, 0}).</input>
{ok,&lt;0.37.0>}
2> <input>dbg:p(all, [call]).</input>
{ok,[{matched,nonode@nohost,25}]}
3> <input>dbg:tp(mymod,[{'_',[],[]}]).</input>
{ok,[{matched,nonode@nohost,0},{saved,1}]}
4> <input>mymod:</input> % TAB pressed here
%% -- Deadlock --</pre>
    <p>Here's another example:</p>
    <pre>
%% Using a shell without line editing (oldshell)
1> <input>dbg:tracer(process).</input>
{ok,&lt;0.31.0>}
2> <input>dbg:p(all, [call]).</input>
{ok,[{matched,nonode@nohost,25}]}
3> <input>dbg:tp(lists,[{'_',[],[]}]).</input>
{ok,[{matched,nonode@nohost,0},{saved,1}]}
% -- Deadlock --</pre>
    <p>The reason we get a deadlock in the first example is because when TAB is pressed 
      to expand the function name, the group leader (which handles character input) calls
      <c>mymod:module_info()</c>. This generates a trace message which, in turn, causes the 
      tracer process to send an IO request to the group leader (by calling <c>io:format/2</c>).
      We end up in a deadlock.</p>
    <p>In the second example we use the default trace handler function. This handler
      prints to tty by sending IO requests to the <c>user</c> process. When Erlang is
      started in oldshell mode, the shell process will have <c>user</c> as its
      group leader and so will the tracer process in this example. Since <c>user</c> calls 
      functions in <c>lists</c> we end up in a deadlock as soon as the first IO request is sent.</p>
    <p>Here are a few suggestions for how to avoid deadlock:</p>
    <list type="bulleted">
      <item>Don't trace the group leader of the tracer process. If tracing has been switched on
       for all processes, call <c>dbg:p(TracerGLPid,clear)</c> to stop tracing the group leader
       (<c>TracerGLPid</c>). <c>process_info(TracerPid,group_leader)</c> tells you 
       which process this is (<c>TracerPid</c> is returned from <c>dbg:get_tracer/0</c>).</item>
      <item>Don't trace the <c>user</c> process if using the default trace handler function.</item>
      <item>In your own trace handler function, call <c>erlang:display/1</c> instead of an
      <c>io</c> function or, if <c>user</c> is not used as group leader, print to 
      <c>user</c> instead of the default group leader. Example:
      <c>io:format(user,Str,Args)</c>.</item>
    </list>
  </section>
</erlref>