path: root/lib/ssl/doc/src/using_ssl.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">

<chapter>
  <header>
    <copyright>
      <year>2003</year><year>2016</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
    
    </legalnotice>

    <title>Using SSL application API</title>
    <prepared></prepared>
    <responsible></responsible>
    <docno></docno>
    <approved></approved>
    <checked></checked>
    <date></date>
    <rev></rev>
    <file>using_ssl.xml</file>
  </header>
  <p>To see relevant version information for ssl, call
  <seealso marker="ssl:ssl#versions-0"><c>ssl:versions/0</c></seealso>
  .</p>
    
  <p>To see all supported cipher suites, call  <seealso marker="ssl:ssl#cipher_suites-1"><c>ssl:cipher_suites(all)</c> </seealso>. 
  The available cipher suites for a connection depend on your certificate. 
  Specific cipher suites that you want your connection to use can also be 
  specified. Default is to use the strongest available.</p>
  
  <section>
    <title>Setting up Connections</title>
    
    <p>This section shows a small example of how to set up client/server connections
    using the Erlang shell. The returned value of the <c>sslsocket</c> is abbreviated
    with <c>[...]</c> as it can be fairly large and is opaque.</p>
    
    <section>
      <title>Minimal Example</title>
      
      <note><p> The minimal setup is not the most secure setup of SSL/TLS/DTLS.</p>    
      </note>

      <p>To set up client/server connections:</p>

      <p><em>Step 1:</em> Start the server side:</p>
      <code type="erl">1 server> ssl:start().
ok</code>
      
      <p><em>Step 2:</em> Create an TLS listen socket: (To run DTLS add the option {protocol, dtls})</p>
      <code type="erl">2 server> {ok, ListenSocket} =
ssl:listen(9999, [{certfile, "cert.pem"}, {keyfile, "key.pem"},{reuseaddr, true}]).
{ok,{sslsocket, [...]}}</code>
      
      <p><em>Step 3:</em> Do a transport accept on the TLS listen socket:</p>
      <code type="erl">3 server> {ok, Socket} = ssl:transport_accept(ListenSocket).
{ok,{sslsocket, [...]}}</code>

      <p><em>Step 4:</em> Start the client side: </p>
      <code type="erl">1 client> ssl:start().
ok</code>
      <p> To run DTLS add the option {protocol, dtls} to third argument.</p>
      <code type="erl">2 client> {ok, Socket} = ssl:connect("localhost", 9999,  [], infinity).
{ok,{sslsocket, [...]}}</code>
      
      <p><em>Step 5:</em> Do the TLS handshake:</p>
      <code type="erl">4 server> ok = ssl:ssl_accept(Socket).
ok</code>
      
      <p><em>Step 6:</em> Send a message over TLS:</p>
      <code type="erl">5 server> ssl:send(Socket, "foo").
ok</code>
      
      <p><em>Step 7:</em> Flush the shell message queue to see that the message
      was sent on the server side:</p>
      <code type="erl">3 client> flush().
Shell got {ssl,{sslsocket,[...]},"foo"}
ok</code>
    </section>
    
    <section>
      <title>Upgrade Example - TLS only </title>
      
      <note><p>To upgrade a TCP/IP connection to an SSL connection, the
      client and server must agree to do so. The agreement
      can be accomplished by using a protocol, for example, the one used by HTTP
      specified in RFC 2817.</p></note>

      <p>To upgrade to an SSL connection:</p>
      
      <p><em>Step 1:</em> Start the server side:</p>
      <code type="erl">1 server> ssl:start().
ok</code>
      
      <p><em>Step 2:</em> Create a normal TCP listen socket:</p>
      <code type="erl">2 server> {ok, ListenSocket} = gen_tcp:listen(9999, [{reuseaddr, true}]).
{ok, #Port&lt;0.475&gt;}</code>
      
      <p><em>Step 3:</em> Accept client connection:</p>
      <code type="erl">3 server> {ok, Socket} = gen_tcp:accept(ListenSocket).
{ok, #Port&lt;0.476&gt;}</code>
      
      <p><em>Step 4:</em> Start the client side:</p>
      <code type="erl">1 client> ssl:start().
ok</code>
      
      <code type="erl">2 client> {ok, Socket} = gen_tcp:connect("localhost", 9999,  [], infinity).</code>
      
      <p><em>Step 5:</em> Ensure <c>active</c> is set to <c>false</c> before trying
      to upgrade a connection to an SSL connection, otherwise
      SSL handshake messages can be delivered to the wrong process:</p>
      <code type="erl">4 server> inet:setopts(Socket, [{active, false}]).
ok</code>
      
      <p><em>Step 6:</em> Do the TLS handshake:</p>
      <code type="erl">5 server> {ok, TLSSocket} = ssl:ssl_accept(Socket, [{cacertfile, "cacerts.pem"},
{certfile, "cert.pem"}, {keyfile, "key.pem"}]).
{ok,{sslsocket,[...]}}</code>
      
      <p><em>Step 7:</em> Upgrade to an TLS connection. The client and server
      must agree upon the upgrade. The server must call
      <c>ssl:accept/2</c> before the client calls <c>ssl:connect/3.</c></p>
      <code type="erl">3 client>{ok, TLSSocket} = ssl:connect(Socket, [{cacertfile, "cacerts.pem"},
{certfile, "cert.pem"}, {keyfile, "key.pem"}], infinity).
{ok,{sslsocket,[...]}}</code>
      
      <p><em>Step 8:</em> Send a message over TLS:</p>
      <code type="erl">4 client> ssl:send(TLSSocket, "foo").
ok</code>
      
      <p><em>Step 9:</em> Set <c>active true</c> on the TLS socket:</p>
      <code type="erl">4 server> ssl:setopts(TLSSocket, [{active, true}]).
ok</code>
      
      <p><em>Step 10:</em> Flush the shell message queue to see that the message
      was sent on the client side:</p>
      <code type="erl">5 server> flush().
Shell got {ssl,{sslsocket,[...]},"foo"}
ok</code>
    </section>
  </section>

  <section>
    <title>Customizing cipher suits</title>

    <p>Fetch default cipher suite list for an TLS/DTLS version. Change default
    to all to get all possible cipher suites.</p>
    <code type="erl">1>  Default = ssl:cipher_suites(default, 'tlsv1.2').
    [#{cipher => aes_256_gcm,key_exchange => ecdhe_ecdsa,
    mac => aead,prf => sha384}, ....]
</code>

    <p>In OTP 20 it is desirable to remove all cipher suites
    that uses rsa kexchange (removed from default in 21) </p>
    <code type="erl">2> NoRSA =
    ssl:filter_cipher_suites(Default,
                            [{key_exchange, fun(rsa) -> false;
			                       (_) -> true end}]).
    [...]
    </code>

    <p> Pick just a few suites </p>
    <code type="erl"> 3> Suites =
    ssl:filter_cipher_suites(Default,
                            [{key_exchange, fun(ecdh_ecdsa) -> true;
			                       (_) -> false end},
                             {cipher, fun(aes_128_cbc) ->true;
			                  (_) ->false end}]).
    [#{cipher => aes_128_cbc,key_exchange => ecdh_ecdsa,
     mac => sha256,prf => sha256},
     #{cipher => aes_128_cbc,key_exchange => ecdh_ecdsa,mac => sha,
     prf => default_prf}]
    </code>
    
    <p> Make some particular suites the most preferred, or least
    preferred by changing prepend to append.</p>
    <code type="erl"> 4>ssl:prepend_cipher_suites(Suites, Default).
  [#{cipher => aes_128_cbc,key_exchange => ecdh_ecdsa,
     mac => sha256,prf => sha256},
   #{cipher => aes_128_cbc,key_exchange => ecdh_ecdsa,mac => sha,
     prf => default_prf},
   #{cipher => aes_256_cbc,key_exchange => ecdhe_ecdsa,
     mac => sha384,prf => sha384}, ...]
    </code>
  </section>      

  <section>
    <title>Using an Engine Stored Key</title>
    
    <p>Erlang ssl application is able to use private keys provided
    by OpenSSL engines using the following mechanism:</p>
    
    <code type="erl">1> ssl:start().
ok</code>

    <p>Load a crypto engine, should be done once per engine used. For example
    dynamically load the engine called <c>MyEngine</c>:
    </p>
    <code type="erl">2> {ok, EngineRef} =
crypto:engine_load(&lt;&lt;"dynamic">>,
                   [{&lt;&lt;"SO_PATH">>, "/tmp/user/engines/MyEngine"},&lt;&lt;"LOAD">>],[]).
{ok,#Ref&lt;0.2399045421.3028942852.173962>}
    </code>
    
    <p>Create a map with the engine information and the algorithm used by the engine:</p>
    <code type="erl">3> PrivKey =
 #{algorithm => rsa,
   engine => EngineRef,
   key_id => "id of the private key in Engine"}.
    </code>
    <p>Use the map in the ssl key option:</p>
    <code type="erl">4> {ok, SSLSocket} =
ssl:connect("localhost", 9999,
            [{cacertfile, "cacerts.pem"},
             {certfile, "cert.pem"},
             {key, PrivKey}], infinity).
    </code>

    <p>See also <seealso marker="crypto:engine_load#engine_load"> crypto documentation</seealso> </p>
    
     </section>      
  
 </chapter>