%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2019-2019. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%%
-module(ssl_api_SUITE).
%% Note: This directive should only be used in test suites.
-compile(export_all).
-include_lib("common_test/include/ct.hrl").
-include_lib("ssl/src/ssl_api.hrl").
-define(SLEEP, 500).
%%--------------------------------------------------------------------
%% Common Test interface functions -----------------------------------
%%--------------------------------------------------------------------
all() ->
[
{group, 'tlsv1.3'},
{group, 'tlsv1.2'},
{group, 'tlsv1.1'},
{group, 'tlsv1'},
{group, 'sslv3'},
{group, 'dtlsv1.2'},
{group, 'dtlsv1'}
].
groups() ->
[
{'tlsv1.3', [], ((gen_api_tests() ++ tls13_group() ++ handshake_paus_tests()) -- [dh_params, honor_server_cipher_order, honor_client_cipher_order,
new_options_in_handshake])
++ (since_1_2() -- [conf_signature_algs])},
{'tlsv1.2', [], gen_api_tests() ++ since_1_2() ++ handshake_paus_tests() ++ pre_1_3()},
{'tlsv1.1', [], gen_api_tests() ++ handshake_paus_tests() ++ pre_1_3()},
{'tlsv1', [], gen_api_tests() ++ handshake_paus_tests() ++ pre_1_3() ++ beast_mitigation_test()},
{'sslv3', [], (gen_api_tests() -- [new_options_in_handshake]) ++ beast_mitigation_test() ++ pre_1_3()},
{'dtlsv1.2', [], (gen_api_tests() -- [invalid_keyfile, invalid_certfile, invalid_cacertfile,
invalid_options, new_options_in_handshake]) ++ handshake_paus_tests() ++ pre_1_3()},
{'dtlsv1', [], (gen_api_tests() -- [invalid_keyfile, invalid_certfile, invalid_cacertfile,
invalid_options, new_options_in_handshake]) ++ handshake_paus_tests() ++ pre_1_3()}
].
since_1_2() ->
[
conf_signature_algs,
no_common_signature_algs
].
pre_1_3() ->
[
default_reject_anonymous
].
gen_api_tests() ->
[
peercert,
peercert_with_client_cert,
connection_information,
secret_connection_info,
versions,
active_n,
dh_params,
hibernate,
hibernate_right_away,
listen_socket,
recv_active,
recv_active_once,
recv_active_n,
recv_timeout,
recv_close,
controlling_process,
controller_dies,
controlling_process_transport_accept_socket,
close_with_timeout,
close_in_error_state,
call_in_error_state,
close_transport_accept,
abuse_transport_accept_socket,
honor_server_cipher_order,
honor_client_cipher_order,
ipv6,
der_input,
new_options_in_handshake,
max_handshake_size,
invalid_certfile,
invalid_cacertfile,
invalid_keyfile,
options_not_proplist,
invalid_options
].
handshake_paus_tests() ->
[
handshake_continue,
handshake_continue_timeout,
hello_client_cancel,
hello_server_cancel
].
%% Only relevant for SSL 3.0 and TLS 1.1
beast_mitigation_test() ->
[%% Original option
rizzo_disabled,
%% Same effect as disable
rizzo_zero_n,
%% Same as default
rizzo_one_n_minus_one
].
tls13_group() ->
[
supported_groups,
honor_server_cipher_order_tls13,
honor_client_cipher_order_tls13
].
init_per_suite(Config0) ->
catch crypto:stop(),
try crypto:start() of
ok ->
ssl_test_lib:clean_start(),
ssl_test_lib:make_rsa_cert(Config0)
catch _:_ ->
{skip, "Crypto did not start"}
end.
end_per_suite(_Config) ->
ssl:stop(),
application:unload(ssl),
application:stop(crypto).
init_per_group(GroupName, Config) ->
case ssl_test_lib:is_tls_version(GroupName) of
true ->
case ssl_test_lib:sufficient_crypto_support(GroupName) of
true ->
[{client_type, erlang},
{server_type, erlang} | ssl_test_lib:init_tls_version(GroupName, Config)];
false ->
{skip, "Missing crypto support"}
end;
_ ->
ssl:start(),
Config
end.
end_per_group(GroupName, Config) ->
case ssl_test_lib:is_tls_version(GroupName) of
true ->
ssl_test_lib:clean_tls_version(Config);
false ->
Config
end.
init_per_testcase(prf, Config) ->
ssl_test_lib:ct_log_supported_protocol_versions(Config),
ct:timetrap({seconds, 10}),
Version = ssl_test_lib:protocol_version(Config),
PRFS = [md5, sha, sha256, sha384, sha512],
%% All are the result of running tls_v1:prf(PrfAlgo, <<>>, <<>>, <<>>, 16)
%% with the specified PRF algorithm
ExpectedPrfResults =
[{md5, <<96,139,180,171,236,210,13,10,28,32,2,23,88,224,235,199>>},
{sha, <<95,3,183,114,33,169,197,187,231,243,19,242,220,228,70,151>>},
{sha256, <<166,249,145,171,43,95,158,232,6,60,17,90,183,180,0,155>>},
{sha384, <<153,182,217,96,186,130,105,85,65,103,123,247,146,91,47,106>>},
{sha512, <<145,8,98,38,243,96,42,94,163,33,53,49,241,4,127,28>>},
%% TLS 1.0 and 1.1 PRF:
{md5sha, <<63,136,3,217,205,123,200,177,251,211,17,229,132,4,173,80>>}],
TestPlan = prf_create_plan([Version], PRFS, ExpectedPrfResults),
[{prf_test_plan, TestPlan} | Config];
init_per_testcase(_TestCase, Config) ->
ssl_test_lib:ct_log_supported_protocol_versions(Config),
ct:timetrap({seconds, 10}),
Config.
end_per_testcase(internal_active_n, _Config) ->
application:unset_env(ssl, internal_active_n);
end_per_testcase(_TestCase, Config) ->
Config.
%%--------------------------------------------------------------------
%% Test Cases --------------------------------------------------------
%%--------------------------------------------------------------------
peercert() ->
[{doc,"Test API function peercert/1"}].
peercert(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ClientNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, peercert_result, []}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ServerNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, peercert_result, []}},
{options, ClientOpts}]),
CertFile = proplists:get_value(certfile, ServerOpts),
[{'Certificate', BinCert, _}]= ssl_test_lib:pem_to_der(CertFile),
ServerMsg = {error, no_peercert},
ClientMsg = {ok, BinCert},
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
peercert_with_client_cert() ->
[{doc,"Test API function peercert/1"}].
peercert_with_client_cert(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ClientNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, peercert_result, []}},
{options, [{verify, verify_peer} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ServerNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, peercert_result, []}},
{options, ClientOpts}]),
ServerCertFile = proplists:get_value(certfile, ServerOpts),
[{'Certificate', ServerBinCert, _}]= ssl_test_lib:pem_to_der(ServerCertFile),
ClientCertFile = proplists:get_value(certfile, ClientOpts),
[{'Certificate', ClientBinCert, _}]= ssl_test_lib:pem_to_der(ClientCertFile),
ServerMsg = {ok, ClientBinCert},
ClientMsg = {ok, ServerBinCert},
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
connection_information() ->
[{doc,"Test the API function ssl:connection_information/1"}].
connection_information(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, connection_information_result, []}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, connection_information_result, []}},
{options, ClientOpts}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
secret_connection_info() ->
[{doc,"Test the API function ssl:connection_information/2"}].
secret_connection_info(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, secret_connection_info_result, []}},
{options, [{verify, verify_peer} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, secret_connection_info_result, []}},
{options, [{verify, verify_peer} |ClientOpts]}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ssl_test_lib:check_result(Server, true, Client, true),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
prf() ->
[{doc,"Test that ssl:prf/5 uses the negotiated PRF."}].
prf(Config) when is_list(Config) ->
TestPlan = proplists:get_value(prf_test_plan, Config),
case TestPlan of
[] -> ct:fail({error, empty_prf_test_plan});
_ -> lists:foreach(fun(Suite) ->
lists:foreach(
fun(Test) ->
V = proplists:get_value(tls_ver, Test),
C = proplists:get_value(ciphers, Test),
E = proplists:get_value(expected, Test),
P = proplists:get_value(prf, Test),
prf_run_test(Config, V, C, E, P)
end, Suite)
end, TestPlan)
end.
%%--------------------------------------------------------------------
dh_params() ->
[{doc,"Test to specify DH-params file in server."}].
dh_params(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
DataDir = proplists:get_value(data_dir, Config),
DHParamFile = filename:join(DataDir, "dHParam.pem"),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, [{dhfile, DHParamFile} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options,
[{ciphers,[{dhe_rsa,aes_256_cbc,sha}]} |
ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
conf_signature_algs() ->
[{doc,"Test to set the signature_algs option on both client and server"}].
conf_signature_algs(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result, []}},
{options, [{active, false}, {signature_algs, [{sha256, rsa}]} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client =
ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result, []}},
{options, [{active, false}, {signature_algs, [{sha256, rsa}]} | ClientOpts]}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
no_common_signature_algs() ->
[{doc,"Set the signature_algs option so that there client and server does not share any hash sign algorithms"}].
no_common_signature_algs(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0},
{from, self()},
{options, [{signature_algs, [{sha256, rsa}]}
| ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{options, [{signature_algs, [{sha384, rsa}]}
| ClientOpts]}]),
ssl_test_lib:check_server_alert(Server, Client, insufficient_security).
%%--------------------------------------------------------------------
handshake_continue() ->
[{doc, "Test API function ssl:handshake_continue/3"}].
handshake_continue(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, ssl_test_lib:ssl_options([{reuseaddr, true},
{verify, verify_peer},
{handshake, hello} | ServerOpts
],
Config)},
{continue_options, proplists:delete(reuseaddr, ServerOpts)}
]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, ssl_test_lib:ssl_options([{handshake, hello},
{verify, verify_peer} | ClientOpts
],
Config)},
{continue_options, proplists:delete(reuseaddr, ClientOpts)}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%------------------------------------------------------------------
handshake_continue_timeout() ->
[{doc, "Test API function ssl:handshake_continue/3 with short timeout"}].
handshake_continue_timeout(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{timeout, 1},
{options, ssl_test_lib:ssl_options([{reuseaddr, true}, {handshake, hello},
{verify, verify_peer} | ServerOpts],
Config)},
{continue_options, proplists:delete(reuseaddr, ServerOpts)}
]),
Port = ssl_test_lib:inet_port(Server),
ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{options, [{verify, verify_peer} | ClientOpts]}]),
ssl_test_lib:check_result(Server, {error,timeout}),
ssl_test_lib:close(Server).
%%--------------------------------------------------------------------
hello_client_cancel() ->
[{doc, "Test API function ssl:handshake_cancel/1 on the client side"}].
hello_client_cancel(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{options, ssl_test_lib:ssl_options([{handshake, hello},
{verify, verify_peer} | ServerOpts], Config)},
{continue_options, proplists:delete(reuseaddr, ServerOpts)}]),
Port = ssl_test_lib:inet_port(Server),
%% That is ssl:handshake_cancel returns ok
{connect_failed, ok} = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{options, ssl_test_lib:ssl_options([{handshake, hello},
{verify, verify_peer} | ClientOpts], Config)},
{continue_options, cancel}]),
ssl_test_lib:check_server_alert(Server, user_canceled).
%%--------------------------------------------------------------------
hello_server_cancel() ->
[{doc, "Test API function ssl:handshake_cancel/1 on the server side"}].
hello_server_cancel(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{options, ssl_test_lib:ssl_options([{handshake, hello},
{verify, verify_peer} | ServerOpts
], Config)},
{continue_options, cancel}]),
Port = ssl_test_lib:inet_port(Server),
ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{options, ssl_test_lib:ssl_options([{handshake, hello},
{verify, verify_peer} | ClientOpts
], Config)},
{continue_options, proplists:delete(reuseaddr, ClientOpts)}]),
ssl_test_lib:check_result(Server, ok).
%%--------------------------------------------------------------------
versions() ->
[{doc,"Test API function versions/0"}].
versions(Config) when is_list(Config) ->
[_|_] = Versions = ssl:versions(),
ct:log("~p~n", [Versions]).
%%--------------------------------------------------------------------
%% Test case adapted from gen_tcp_misc_SUITE.
active_n() ->
[{doc,"Test {active,N} option"}].
active_n(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
Port = ssl_test_lib:inet_port(node()),
N = 3,
LS = ok(ssl:listen(Port, [{active,N}|ServerOpts])),
[{active,N}] = ok(ssl:getopts(LS, [active])),
active_n_common(LS, N),
Self = self(),
spawn_link(fun() ->
S0 = ok(ssl:transport_accept(LS)),
{ok, S} = ssl:handshake(S0),
ok = ssl:setopts(S, [{active,N}]),
[{active,N}] = ok(ssl:getopts(S, [active])),
ssl:controlling_process(S, Self),
Self ! {server, S}
end),
C = ok(ssl:connect("localhost", Port, [{active,N}|ClientOpts])),
[{active,N}] = ok(ssl:getopts(C, [active])),
S = receive
{server, S0} -> S0
after
1000 ->
exit({error, connect})
end,
active_n_common(C, N),
active_n_common(S, N),
ok = ssl:setopts(C, [{active,N}]),
ok = ssl:setopts(S, [{active,N}]),
ReceiveMsg = fun(Socket, Msg) ->
receive
{ssl,Socket,Msg} ->
ok;
{ssl,Socket,Begin} ->
receive
{ssl,Socket,End} ->
Msg = Begin ++ End,
ok
after 1000 ->
exit(timeout)
end
after 1000 ->
exit(timeout)
end
end,
repeat(3, fun(I) ->
Msg = "message "++integer_to_list(I),
ok = ssl:send(C, Msg),
ReceiveMsg(S, Msg),
ok = ssl:send(S, Msg),
ReceiveMsg(C, Msg)
end),
receive
{ssl_passive,S} ->
[{active,false}] = ok(ssl:getopts(S, [active]))
after
1000 ->
exit({error,ssl_passive})
end,
receive
{ssl_passive,C} ->
[{active,false}] = ok(ssl:getopts(C, [active]))
after
1000 ->
exit({error,ssl_passive})
end,
LS2 = ok(ssl:listen(0, [{active,0}])),
receive
{ssl_passive,LS2} ->
[{active,false}] = ok(ssl:getopts(LS2, [active]))
after
1000 ->
exit({error,ssl_passive})
end,
ok = ssl:close(LS2),
ok = ssl:close(C),
ok = ssl:close(S),
ok = ssl:close(LS),
ok.
hibernate() ->
[{doc,"Check that an SSL connection that is started with option "
"{hibernate_after, 1000} indeed hibernates after 1000ms of "
"inactivity"}].
hibernate(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
{Client, #sslsocket{pid=[Pid|_]}} = ssl_test_lib:start_client([return_socket,
{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, [{hibernate_after, 1000}|ClientOpts]}]),
{current_function, _} =
process_info(Pid, current_function),
ssl_test_lib:check_result(Server, ok, Client, ok),
ct:sleep(1500),
{current_function, {erlang, hibernate, 3}} =
process_info(Pid, current_function),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
hibernate_right_away() ->
[{doc,"Check that an SSL connection that is configured to hibernate "
"after 0 or 1 milliseconds hibernates as soon as possible and not "
"crashes"}].
hibernate_right_away(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
StartServerOpts = [{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, ServerOpts}],
StartClientOpts = [return_socket,
{node, ClientNode},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}}],
Server1 = ssl_test_lib:start_server(StartServerOpts),
Port1 = ssl_test_lib:inet_port(Server1),
{Client1, #sslsocket{pid = [Pid1|_]}} = ssl_test_lib:start_client(StartClientOpts ++
[{port, Port1}, {options, [{hibernate_after, 0}|ClientOpts]}]),
ssl_test_lib:check_result(Server1, ok, Client1, ok),
ct:sleep(1000), %% Schedule out
{current_function, {erlang, hibernate, 3}} =
process_info(Pid1, current_function),
ssl_test_lib:close(Server1),
ssl_test_lib:close(Client1),
Server2 = ssl_test_lib:start_server(StartServerOpts),
Port2 = ssl_test_lib:inet_port(Server2),
{Client2, #sslsocket{pid = [Pid2|_]}} = ssl_test_lib:start_client(StartClientOpts ++
[{port, Port2}, {options, [{hibernate_after, 1}|ClientOpts]}]),
ssl_test_lib:check_result(Server2, ok, Client2, ok),
ct:sleep(1000), %% Schedule out
{current_function, {erlang, hibernate, 3}} =
process_info(Pid2, current_function),
ssl_test_lib:close(Server2),
ssl_test_lib:close(Client2).
listen_socket() ->
[{doc,"Check error handling and inet compliance when calling API functions with listen sockets."}].
listen_socket(Config) ->
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ok, ListenSocket} = ssl:listen(0, ServerOpts),
%% This can be a valid thing to do as
%% options are inherited by the accept socket
ok = ssl:controlling_process(ListenSocket, self()),
{ok, _} = ssl:sockname(ListenSocket),
{error, enotconn} = ssl:send(ListenSocket, <<"data">>),
{error, enotconn} = ssl:recv(ListenSocket, 0),
{error, enotconn} = ssl:connection_information(ListenSocket),
{error, enotconn} = ssl:peername(ListenSocket),
{error, enotconn} = ssl:peercert(ListenSocket),
{error, enotconn} = ssl:renegotiate(ListenSocket),
{error, enotconn} = ssl:prf(ListenSocket, 'master_secret', <<"Label">>, [client_random], 256),
{error, enotconn} = ssl:shutdown(ListenSocket, read_write),
ok = ssl:close(ListenSocket).
%%--------------------------------------------------------------------
recv_active() ->
[{doc,"Test recv on active socket"}].
recv_active(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, try_recv_active, []}},
{options, [{active, true} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client =
ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, try_recv_active, []}},
{options, [{active, true} | ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
recv_active_once() ->
[{doc,"Test recv on active (once) socket"}].
recv_active_once(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, try_recv_active_once, []}},
{options, [{active, once} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client =
ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, try_recv_active_once, []}},
{options, [{active, once} | ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
recv_active_n() ->
[{doc,"Test recv on active (n) socket"}].
recv_active_n(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, try_recv_active_once, []}},
{options, [{active, 1} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client =
ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, try_recv_active_once, []}},
{options, [{active, 1} | ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
recv_timeout() ->
[{doc,"Test ssl:ssl_accept timeout"}].
recv_timeout(Config) ->
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, send_recv_result_timeout_server, []}},
{options, [{active, false} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE,
send_recv_result_timeout_client, []}},
{options, [{active, false} | ClientOpts]}]),
ssl_test_lib:check_result(Client, ok, Server, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
recv_close() ->
[{doc,"Special case of call error handling"}].
recv_close(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, do_recv_close, []}},
{options, [{active, false} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
{_Client, #sslsocket{} = SslSocket} = ssl_test_lib:start_client([return_socket,
{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, no_result, []}},
{options, ClientOpts}]),
ssl:close(SslSocket),
ssl_test_lib:check_result(Server, ok).
%%--------------------------------------------------------------------
controlling_process() ->
[{doc,"Test API function controlling_process/2"}].
controlling_process(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
ClientMsg = "Server hello",
ServerMsg = "Client hello",
Server = ssl_test_lib:start_server([
{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE,
controlling_process_result, [self(),
ServerMsg]}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
{Client, CSocket} = ssl_test_lib:start_client([return_socket,
{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE,
controlling_process_result, [self(),
ClientMsg]}},
{options, ClientOpts}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ServerMsg = ssl_test_lib:active_recv(CSocket, length(ServerMsg)),
%% We do not have the TLS server socket but all messages form the client
%% socket are now read, so ramining are form the server socket
ClientMsg = ssl_active_recv(length(ClientMsg)),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
controller_dies() ->
[{doc,"Test that the socket is closed after controlling process dies"}].
controller_dies(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
ClientMsg = "Hello server",
ServerMsg = "Hello client",
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE,
controller_dies_result, [self(),
ServerMsg]}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE,
controller_dies_result, [self(),
ClientMsg]}},
{options, ClientOpts}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n", [self(), Client, Server]),
ct:sleep(?SLEEP), %% so that they are connected
process_flag(trap_exit, true),
%% Test that clients die
exit(Client, killed),
get_close(Client, ?LINE),
%% Test that clients die when process disappear
Server ! listen,
Tester = self(),
Connect = fun(Pid) ->
{ok, Socket} = ssl:connect(Hostname, Port, ClientOpts),
%% Make sure server finishes and verification
%% and is in coonection state before
%% killing client
ct:sleep(?SLEEP),
Pid ! {self(), connected, Socket},
receive die_nice -> normal end
end,
Client2 = spawn_link(fun() -> Connect(Tester) end),
receive {Client2, connected, _Socket} -> Client2 ! die_nice end,
get_close(Client2, ?LINE),
%% Test that clients die when the controlling process have changed
Server ! listen,
Client3 = spawn_link(fun() -> Connect(Tester) end),
Controller = spawn_link(fun() -> receive die_nice -> normal end end),
receive
{Client3, connected, Socket} ->
ok = ssl:controlling_process(Socket, Controller),
Client3 ! die_nice
end,
ct:log("Wating on exit ~p~n",[Client3]),
receive {'EXIT', Client3, normal} -> ok end,
receive %% Client3 is dead but that doesn't matter, socket should not be closed.
Unexpected ->
ct:log("Unexpected ~p~n",[Unexpected]),
ct:fail({line, ?LINE-1})
after 1000 ->
ok
end,
Controller ! die_nice,
get_close(Controller, ?LINE),
%% Test that servers die
Server ! listen,
LastClient = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE,
controller_dies_result, [self(),
ClientMsg]}},
{options, ClientOpts}]),
ct:sleep(?SLEEP), %% so that they are connected
exit(Server, killed),
get_close(Server, ?LINE),
process_flag(trap_exit, false),
ssl_test_lib:close(LastClient).
%%--------------------------------------------------------------------
controlling_process_transport_accept_socket() ->
[{doc,"Only ssl:handshake and ssl:controlling_process is allowed for transport_accept:sockets"}].
controlling_process_transport_accept_socket(Config) when is_list(Config) ->
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server_transport_control([{node, ServerNode},
{port, 0},
{from, self()},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
_Client = ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{options, ClientOpts}]),
ssl_test_lib:check_result(Server, ok),
ssl_test_lib:close(Server).
%%--------------------------------------------------------------------
close_with_timeout() ->
[{doc,"Test normal (not downgrade) ssl:close/2"}].
close_with_timeout(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, tls_close, []}},
{options,[{active, false} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, tls_close, []}},
{options, [{active, false} |ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok).
%%--------------------------------------------------------------------
close_in_error_state() ->
[{doc,"Special case of closing socket in error state"}].
close_in_error_state(Config) when is_list(Config) ->
ServerOpts0 = ssl_test_lib:ssl_options(server_opts, Config),
ServerOpts = [{cacertfile, "foo.pem"} | proplists:delete(cacertfile, ServerOpts0)],
ClientOpts = ssl_test_lib:ssl_options(client_opts, Config),
_ = spawn_link(?MODULE, run_error_server_close, [[self() | ServerOpts]]),
receive
{_Pid, Port} ->
spawn_link(?MODULE, run_client_error, [[Port, ClientOpts]])
end,
receive
ok ->
ok;
Other ->
ct:fail(Other)
end.
%%--------------------------------------------------------------------
call_in_error_state() ->
[{doc,"Special case of call error handling"}].
call_in_error_state(Config) when is_list(Config) ->
ServerOpts0 = ssl_test_lib:ssl_options(server_opts, Config),
ClientOpts = ssl_test_lib:ssl_options(client_opts, Config),
ServerOpts = [{cacertfile, "foo.pem"} | proplists:delete(cacertfile, ServerOpts0)],
Pid = spawn_link(?MODULE, run_error_server, [[self() | ServerOpts]]),
receive
{Pid, Port} ->
spawn_link(?MODULE, run_client_error, [[Port, ClientOpts]])
end,
receive
{error, closed} ->
ok;
Other ->
ct:fail(Other)
end.
%%--------------------------------------------------------------------
close_transport_accept() ->
[{doc,"Tests closing ssl socket when waiting on ssl:transport_accept/1"}].
close_transport_accept(Config) when is_list(Config) ->
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{_ClientNode, ServerNode, _Hostname} = ssl_test_lib:run_where(Config),
Port = 0,
Opts = [{active, false} | ServerOpts],
{ok, ListenSocket} = rpc:call(ServerNode, ssl, listen, [Port, Opts]),
spawn_link(fun() ->
ct:sleep(?SLEEP),
rpc:call(ServerNode, ssl, close, [ListenSocket])
end),
case rpc:call(ServerNode, ssl, transport_accept, [ListenSocket]) of
{error, closed} ->
ok;
Other ->
exit({?LINE, Other})
end.
%%--------------------------------------------------------------------
abuse_transport_accept_socket() ->
[{doc,"Only ssl:handshake and ssl:controlling_process is allowed for transport_accept:sockets"}].
abuse_transport_accept_socket(Config) when is_list(Config) ->
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server_transport_abuse_socket([{node, ServerNode},
{port, 0},
{from, self()},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, no_result, []}},
{options, ClientOpts}]),
ssl_test_lib:check_result(Server, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
invalid_keyfile() ->
[{doc,"Test what happens with an invalid key file"}].
invalid_keyfile(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
BadKeyFile = filename:join([proplists:get_value(priv_dir, Config),
"badkey.pem"]),
BadOpts = [{keyfile, BadKeyFile}| proplists:delete(keyfile, ServerOpts)],
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0},
{from, self()},
{options, BadOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client =
ssl_test_lib:start_client_error([{node, ClientNode},
{port, Port}, {host, Hostname},
{from, self()}, {options, ClientOpts}]),
File = proplists:get_value(keyfile,BadOpts),
ssl_test_lib:check_result(Server, {error,{options, {keyfile, File, {error,enoent}}}}, Client,
{error, closed}).
%%--------------------------------------------------------------------
honor_server_cipher_order() ->
[{doc,"Test API honor server cipher order."}].
honor_server_cipher_order(Config) when is_list(Config) ->
ClientCiphers = [#{key_exchange => dhe_rsa,
cipher => aes_128_cbc,
mac => sha,
prf => default_prf},
#{key_exchange => dhe_rsa,
cipher => aes_256_cbc,
mac => sha,
prf => default_prf}],
ServerCiphers = [#{key_exchange => dhe_rsa,
cipher => aes_256_cbc,
mac =>sha,
prf => default_prf},
#{key_exchange => dhe_rsa,
cipher => aes_128_cbc,
mac => sha,
prf => default_prf}],
honor_cipher_order(Config, true, ServerCiphers, ClientCiphers, #{key_exchange => dhe_rsa,
cipher => aes_256_cbc,
mac => sha,
prf => default_prf}).
%%--------------------------------------------------------------------
honor_client_cipher_order() ->
[{doc,"Test API honor server cipher order."}].
honor_client_cipher_order(Config) when is_list(Config) ->
ClientCiphers = [#{key_exchange => dhe_rsa,
cipher => aes_128_cbc,
mac => sha,
prf => default_prf},
#{key_exchange => dhe_rsa,
cipher => aes_256_cbc,
mac => sha,
prf => default_prf}],
ServerCiphers = [#{key_exchange => dhe_rsa,
cipher => aes_256_cbc,
mac =>sha,
prf => default_prf},
#{key_exchange => dhe_rsa,
cipher => aes_128_cbc,
mac => sha,
prf => default_prf}],
honor_cipher_order(Config, false, ServerCiphers, ClientCiphers, #{key_exchange => dhe_rsa,
cipher => aes_128_cbc,
mac => sha,
prf => default_prf}).
%%--------------------------------------------------------------------
ipv6() ->
[{require, ipv6_hosts},
{doc,"Test ipv6."}].
ipv6(Config) when is_list(Config) ->
{ok, Hostname0} = inet:gethostname(),
case lists:member(list_to_atom(Hostname0), ct:get_config(ipv6_hosts)) of
true ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} =
ssl_test_lib:run_where(Config, ipv6),
Server = ssl_test_lib:start_server([{node, ServerNode},
{port, 0}, {from, self()},
{mfa, {ssl_test_lib, send_recv_result, []}},
{options,
[inet6, {active, false} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode},
{port, Port}, {host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result, []}},
{options,
[inet6, {active, false} | ClientOpts]}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client);
false ->
{skip, "Host does not support IPv6"}
end.
%%--------------------------------------------------------------------
der_input() ->
[{doc,"Test to input certs and key as der"}].
der_input(Config) when is_list(Config) ->
DataDir = proplists:get_value(data_dir, Config),
DHParamFile = filename:join(DataDir, "dHParam.pem"),
{status, _, _, StatusInfo} = sys:get_status(whereis(ssl_manager)),
[_, _,_, _, Prop] = StatusInfo,
State = ssl_test_lib:state(Prop),
[CADb | _] = element(6, State),
Size = ets:info(CADb, size),
SeverVerifyOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ServerCert, ServerKey, ServerCaCerts, DHParams} = der_input_opts([{dhfile, DHParamFile} |
SeverVerifyOpts]),
ClientVerifyOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
{ClientCert, ClientKey, ClientCaCerts, DHParams} = der_input_opts([{dhfile, DHParamFile} |
ClientVerifyOpts]),
ServerOpts = [{verify, verify_peer}, {fail_if_no_peer_cert, true},
{dh, DHParams},
{cert, ServerCert}, {key, ServerKey}, {cacerts, ServerCaCerts}],
ClientOpts = [{verify, verify_peer}, {fail_if_no_peer_cert, true},
{dh, DHParams},
{cert, ClientCert}, {key, ClientKey}, {cacerts, ClientCaCerts}],
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result, []}},
{options, [{active, false} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result, []}},
{options, [{active, false} | ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client),
Size = ets:info(CADb, size).
%%--------------------------------------------------------------------
invalid_certfile() ->
[{doc,"Test what happens with an invalid cert file"}].
invalid_certfile(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
BadCertFile = filename:join([proplists:get_value(priv_dir, Config),
"badcert.pem"]),
ServerBadOpts = [{certfile, BadCertFile}| proplists:delete(certfile, ServerOpts)],
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server =
ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0},
{from, self()},
{options, ServerBadOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client =
ssl_test_lib:start_client_error([{node, ClientNode},
{port, Port}, {host, Hostname},
{from, self()},
{options, ClientOpts}]),
File = proplists:get_value(certfile, ServerBadOpts),
ssl_test_lib:check_result(Server, {error,{options, {certfile, File, {error,enoent}}}},
Client, {error, closed}).
%%--------------------------------------------------------------------
invalid_cacertfile() ->
[{doc,"Test what happens with an invalid cacert file"}].
invalid_cacertfile(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
BadCACertFile = filename:join([proplists:get_value(priv_dir, Config),
"badcacert.pem"]),
ServerBadOpts = [{cacertfile, BadCACertFile}| proplists:delete(cacertfile, ServerOpts)],
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server0 =
ssl_test_lib:start_server_error([{node, ServerNode},
{port, 0}, {from, self()},
{options, ServerBadOpts}]),
Port0 = ssl_test_lib:inet_port(Server0),
Client0 =
ssl_test_lib:start_client_error([{node, ClientNode},
{port, Port0}, {host, Hostname},
{from, self()},
{options, ClientOpts}]),
File0 = proplists:get_value(cacertfile, ServerBadOpts),
ssl_test_lib:check_result(Server0, {error, {options, {cacertfile, File0,{error,enoent}}}},
Client0, {error, closed}),
File = File0 ++ "do_not_exit.pem",
ServerBadOpts1 = [{cacertfile, File}|proplists:delete(cacertfile, ServerBadOpts)],
Server1 =
ssl_test_lib:start_server_error([{node, ServerNode},
{port, 0}, {from, self()},
{options, ServerBadOpts1}]),
Port1 = ssl_test_lib:inet_port(Server1),
Client1 =
ssl_test_lib:start_client_error([{node, ClientNode},
{port, Port1}, {host, Hostname},
{from, self()},
{options, ClientOpts}]),
ssl_test_lib:check_result(Server1, {error, {options, {cacertfile, File,{error,enoent}}}},
Client1, {error, closed}),
ok.
%%--------------------------------------------------------------------
new_options_in_handshake() ->
[{doc,"Test that you can set ssl options in handshake/3 and not only in tcp upgrade"}].
new_options_in_handshake(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
Version = ssl_test_lib:protocol_version(Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
[_, Cipher | _] = ssl:filter_cipher_suites(ssl:cipher_suites(all, Version),
[{key_exchange,
fun(dhe_rsa) ->
true;
(ecdhe_rsa) ->
true;
(ecdh_rsa) ->
true;
(rsa) ->
true;
(_) ->
false
end
}]),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{ssl_extra_opts, [{versions, [Version]},
{ciphers,[Cipher]}]}, %% To be set in ssl_accept/3
{mfa, {?MODULE, connection_info_result, []}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, connection_info_result, []}},
{options, [{ciphers, [Cipher]} | ClientOpts]}]),
ct:log("Testcase ~p, Client ~p Server ~p ~n",
[self(), Client, Server]),
ServerMsg = ClientMsg = {ok, {Version, Cipher}},
ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%-------------------------------------------------------------------
max_handshake_size() ->
[{doc,"Test that we can set max_handshake_size to max value."}].
max_handshake_size(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, [{max_handshake_size, 8388607} |ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, [{max_handshake_size, 8388607} | ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok).
%%-------------------------------------------------------------------
options_not_proplist() ->
[{doc,"Test what happens if an option is not a key value tuple"}].
options_not_proplist(Config) when is_list(Config) ->
BadOption = {client_preferred_next_protocols,
client, [<<"spdy/3">>,<<"http/1.1">>], <<"http/1.1">>},
{option_not_a_key_value_tuple, BadOption} =
ssl:connect("twitter.com", 443, [binary, {active, false},
BadOption]).
%%-------------------------------------------------------------------
invalid_options() ->
[{doc,"Test what happens when we give invalid options"}].
invalid_options(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_verify_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Check = fun(Client, Server, {versions, [sslv2, sslv3]} = Option) ->
ssl_test_lib:check_result(Server,
{error, {options, {sslv2, Option}}},
Client,
{error, {options, {sslv2, Option}}});
(Client, Server, Option) ->
ssl_test_lib:check_result(Server,
{error, {options, Option}},
Client,
{error, {options, Option}})
end,
TestOpts =
[{versions, [sslv2, sslv3]},
{verify, 4},
{verify_fun, function},
{fail_if_no_peer_cert, 0},
{verify_client_once, 1},
{depth, four},
{certfile, 'cert.pem'},
{keyfile,'key.pem' },
{password, foo},
{cacertfile, ""},
{dhfile,'dh.pem' },
{ciphers, [{foo, bar, sha, ignore}]},
{reuse_session, foo},
{reuse_sessions, 0},
{renegotiate_at, "10"},
{mode, depech},
{packet, 8.0},
{packet_size, "2"},
{header, a},
{active, trice},
{key, 'key.pem' }],
[begin
Server =
ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0},
{from, self()},
{options, [TestOpt | ServerOpts]}]),
%% Will never reach a point where port is used.
Client =
ssl_test_lib:start_client_error([{node, ClientNode}, {port, 0},
{host, Hostname}, {from, self()},
{options, [TestOpt | ClientOpts]}]),
Check(Client, Server, TestOpt),
ok
end || TestOpt <- TestOpts],
ok.
%%-------------------------------------------------------------------
default_reject_anonymous()->
[{doc,"Test that by default anonymous cipher suites are rejected "}].
default_reject_anonymous(Config) when is_list(Config) ->
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
Version = ssl_test_lib:protocol_version(Config),
TLSVersion = ssl_test_lib:tls_version(Version),
[CipherSuite | _] = ssl_test_lib:ecdh_dh_anonymous_suites(TLSVersion),
Server = ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0},
{from, self()},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{options,
[{ciphers,[CipherSuite]} |
ClientOpts]}]),
ssl_test_lib:check_server_alert(Server, Client, insufficient_security).
%%-------------------------------------------------------------------
%% Note that these test only test that the options are valid to set. As application data
%% is a stream you can not test that the send acctually splits it up as when it arrives
%% again at the user layer it may be concatenated. But COVER can show that the split up
%% code has been run.
rizzo_disabled() ->
[{doc, "Test original beast mitigation disable option for SSL 3.0 and TLS 1.0"}].
rizzo_disabled(Config) ->
ClientOpts = [{beast_mitigation, disabled} | ssl_test_lib:ssl_options(client_rsa_opts, Config)],
ServerOpts = [{beast_mitigation, disabled} | ssl_test_lib:ssl_options(server_rsa_opts, Config)],
ssl_test_lib:basic_test(ClientOpts, ServerOpts, Config).
%%-------------------------------------------------------------------
rizzo_zero_n() ->
[{doc, "Test zero_n beast mitigation option (same affect as original disable option) for SSL 3.0 and TLS 1.0"}].
rizzo_zero_n(Config) ->
ClientOpts = [{beast_mitigation, zero_n} | ssl_test_lib:ssl_options(client_rsa_opts, Config)],
ServerOpts = [{beast_mitigation, zero_n} | ssl_test_lib:ssl_options(server_rsa_opts, Config)],
ssl_test_lib:basic_test(ClientOpts, ServerOpts, Config).
%%-------------------------------------------------------------------
rizzo_one_n_minus_one () ->
[{doc, "Test beast_mitigation option one_n_minus_one (same affect as default) for SSL 3.0 and TLS 1.0"}].
rizzo_one_n_minus_one (Config) ->
ClientOpts = [{beast_mitigation, one_n_minus_one } | ssl_test_lib:ssl_options(client_rsa_opts, Config)],
ServerOpts = [{beast_mitigation, one_n_minus_one} | ssl_test_lib:ssl_options(server_rsa_opts, Config)],
ssl_test_lib:basic_test(ClientOpts, ServerOpts, Config).
supported_groups() ->
[{doc,"Test the supported_groups option in TLS 1.3."}].
supported_groups(Config) when is_list(Config) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, [{supported_groups, [x448, x25519]} | ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {ssl_test_lib, send_recv_result_active, []}},
{options, [{supported_groups,[x448]} | ClientOpts]}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
%%--------------------------------------------------------------------
honor_client_cipher_order_tls13() ->
[{doc,"Test API honor server cipher order in TLS 1.3."}].
honor_client_cipher_order_tls13(Config) when is_list(Config) ->
ClientCiphers = [#{key_exchange => any,
cipher => aes_256_gcm,
mac => aead,
prf => sha384},
#{key_exchange => any,
cipher => aes_128_gcm,
mac => aead,
prf => sha256}],
ServerCiphers = [#{key_exchange => any,
cipher => aes_128_gcm,
mac => aead,
prf => sha256},
#{key_exchange => any,
cipher => aes_256_gcm,
mac => aead,
prf => sha384}],
honor_cipher_order(Config, false, ServerCiphers, ClientCiphers, #{key_exchange => any,
cipher => aes_256_gcm,
mac => aead,
prf => sha384}).
%%--------------------------------------------------------------------
honor_server_cipher_order_tls13() ->
[{doc,"Test API honor server cipher order in TLS 1.3."}].
honor_server_cipher_order_tls13(Config) when is_list(Config) ->
ClientCiphers = [#{key_exchange => any,
cipher => aes_256_gcm,
mac => aead,
prf => sha384},
#{key_exchange => any,
cipher => aes_128_gcm,
mac => aead,
prf => sha256}],
ServerCiphers = [#{key_exchange => any,
cipher => aes_128_gcm,
mac => aead,
prf => sha256},
#{key_exchange => any,
cipher => aes_256_gcm,
mac => aead,
prf => sha384}],
honor_cipher_order(Config, true, ServerCiphers, ClientCiphers, #{key_exchange => any,
cipher => aes_128_gcm,
mac => aead,
prf => sha256}).
%%--------------------------------------------------------------------
%% Internal functions ------------------------------------------------
%%--------------------------------------------------------------------
peercert_result(Socket) ->
ssl:peercert(Socket).
connection_information_result(Socket) ->
{ok, Info = [_ | _]} = ssl:connection_information(Socket),
case length(Info) > 3 of
true ->
%% Atleast one ssl_option() is set
ct:log("Info ~p", [Info]),
ok;
false ->
ct:fail(no_ssl_options_returned)
end.
secret_connection_info_result(Socket) ->
{ok, [{protocol, Protocol}]} = ssl:connection_information(Socket, [protocol]),
{ok, ConnInfo} = ssl:connection_information(Socket, [client_random, server_random, master_secret]),
check_connection_info(Protocol, ConnInfo).
%% In TLS 1.3 the master_secret field is used to store multiple secrets from the key schedule and it is a tuple.
%% client_random and server_random are not used in the TLS 1.3 key schedule.
check_connection_info('tlsv1.3', [{client_random, ClientRand}, {master_secret, {master_secret, MasterSecret}}]) ->
is_binary(ClientRand) andalso is_binary(MasterSecret);
check_connection_info('tlsv1.3', [{server_random, ServerRand}, {master_secret, {master_secret, MasterSecret}}]) ->
is_binary(ServerRand) andalso is_binary(MasterSecret);
check_connection_info(_, [{client_random, ClientRand}, {server_random, ServerRand}, {master_secret, MasterSecret}]) ->
is_binary(ClientRand) andalso is_binary(ServerRand) andalso is_binary(MasterSecret);
check_connection_info(_, _) ->
false.
prf_create_plan(TlsVersions, PRFs, Results) ->
lists:foldl(fun(Ver, Acc) ->
A = prf_ciphers_and_expected(Ver, PRFs, Results),
[A|Acc]
end, [], TlsVersions).
prf_ciphers_and_expected(TlsVer, PRFs, Results) ->
case TlsVer of
TlsVer when TlsVer == sslv3 orelse TlsVer == tlsv1
orelse TlsVer == 'tlsv1.1' orelse TlsVer == 'dtlsv1' ->
Ciphers = ssl:cipher_suites(),
{_, Expected} = lists:keyfind(md5sha, 1, Results),
[[{tls_ver, TlsVer}, {ciphers, Ciphers}, {expected, Expected}, {prf, md5sha}]];
TlsVer when TlsVer == 'tlsv1.2' orelse TlsVer == 'dtlsv1.2'->
lists:foldl(
fun(PRF, Acc) ->
Ciphers = prf_get_ciphers(TlsVer, PRF),
case Ciphers of
[] ->
ct:log("No ciphers for PRF algorithm ~p. Skipping.", [PRF]),
Acc;
Ciphers ->
{_, Expected} = lists:keyfind(PRF, 1, Results),
[[{tls_ver, TlsVer}, {ciphers, Ciphers}, {expected, Expected},
{prf, PRF}] | Acc]
end
end, [], PRFs)
end.
prf_get_ciphers(_, PRF) ->
lists:filter(
fun(C) when tuple_size(C) == 4 andalso
element(4, C) == PRF ->
true;
(_) ->
false
end,
ssl:cipher_suites()).
prf_run_test(_, TlsVer, [], _, Prf) ->
ct:fail({error, cipher_list_empty, TlsVer, Prf});
prf_run_test(Config, TlsVer, Ciphers, Expected, Prf) ->
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
BaseOpts = [{active, true}, {versions, [TlsVer]}, {ciphers, Ciphers}, {protocol, tls_or_dtls(TlsVer)}],
ServerOpts = BaseOpts ++ proplists:get_value(server_opts, Config),
ClientOpts = BaseOpts ++ proplists:get_value(client_opts, Config),
Server = ssl_test_lib:start_server(
[{node, ServerNode}, {port, 0}, {from, self()},
{mfa, {?MODULE, prf_verify_value, [TlsVer, Expected, Prf]}},
{options, ServerOpts}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client(
[{node, ClientNode}, {port, Port},
{host, Hostname}, {from, self()},
{mfa, {?MODULE, prf_verify_value, [TlsVer, Expected, Prf]}},
{options, ClientOpts}]),
ssl_test_lib:check_result(Server, ok, Client, ok),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
prf_verify_value(Socket, TlsVer, Expected, Algo) ->
Ret = ssl:prf(Socket, <<>>, <<>>, [<<>>], 16),
case TlsVer of
sslv3 ->
case Ret of
{error, undefined} -> ok;
_ ->
{error, {expected, {error, undefined},
got, Ret, tls_ver, TlsVer, prf_algorithm, Algo}}
end;
_ ->
case Ret of
{ok, Expected} -> ok;
{ok, Val} -> {error, {expected, Expected, got, Val, tls_ver, TlsVer,
prf_algorithm, Algo}}
end
end.
tls_or_dtls('dtlsv1') ->
dtls;
tls_or_dtls('dtlsv1.2') ->
dtls;
tls_or_dtls(_) ->
tls.
active_n_common(S, N) ->
ok = ssl:setopts(S, [{active,-N}]),
receive
{ssl_passive, S} -> ok
after
1000 ->
error({error,ssl_passive_failure})
end,
[{active,false}] = ok(ssl:getopts(S, [active])),
ok = ssl:setopts(S, [{active,0}]),
receive
{ssl_passive, S} -> ok
after
1000 ->
error({error,ssl_passive_failure})
end,
ok = ssl:setopts(S, [{active,32767}]),
{error,{options,_}} = ssl:setopts(S, [{active,1}]),
{error,{options,_}} = ssl:setopts(S, [{active,-32769}]),
ok = ssl:setopts(S, [{active,-32768}]),
receive
{ssl_passive, S} -> ok
after
1000 ->
error({error,ssl_passive_failure})
end,
[{active,false}] = ok(ssl:getopts(S, [active])),
ok = ssl:setopts(S, [{active,N}]),
ok = ssl:setopts(S, [{active,true}]),
[{active,true}] = ok(ssl:getopts(S, [active])),
receive
_ -> error({error,active_n})
after
0 ->
ok
end,
ok = ssl:setopts(S, [{active,N}]),
ok = ssl:setopts(S, [{active,once}]),
[{active,once}] = ok(ssl:getopts(S, [active])),
receive
_ -> error({error,active_n})
after
0 ->
ok
end,
{error,{options,_}} = ssl:setopts(S, [{active,32768}]),
ok = ssl:setopts(S, [{active,false}]),
[{active,false}] = ok(ssl:getopts(S, [active])),
ok.
ok({ok,V}) -> V.
repeat(N, Fun) ->
repeat(N, N, Fun).
repeat(N, T, Fun) when is_integer(N), N > 0 ->
Fun(T-N),
repeat(N-1, T, Fun);
repeat(_, _, _) ->
ok.
try_recv_active(Socket) ->
ssl:send(Socket, "Hello world"),
{error, einval} = ssl:recv(Socket, 11),
ok.
try_recv_active_once(Socket) ->
{error, einval} = ssl:recv(Socket, 11),
ok.
controlling_process_result(Socket, Pid, Msg) ->
ok = ssl:controlling_process(Socket, Pid),
%% Make sure other side has evaluated controlling_process
%% before message is sent
ct:sleep(?SLEEP),
ssl:send(Socket, Msg),
no_result_msg.
controller_dies_result(_Socket, _Pid, _Msg) ->
receive Result -> Result end.
get_close(Pid, Where) ->
receive
{'EXIT', Pid, _Reason} ->
receive
{_, {ssl_closed, Socket}} ->
ct:log("Socket closed ~p~n",[Socket]);
Unexpected ->
ct:log("Unexpected ~p~n",[Unexpected]),
ct:fail({line, ?LINE-1})
after 5000 ->
ct:fail({timeout, {line, ?LINE, Where}})
end;
Unexpected ->
ct:log("Unexpected ~p~n",[Unexpected]),
ct:fail({line, ?LINE-1})
after 5000 ->
ct:fail({timeout, {line, ?LINE, Where}})
end.
ssl_active_recv(N) ->
ssl_active_recv(N, []).
ssl_active_recv(0, Acc) ->
Acc;
ssl_active_recv(N, Acc) ->
receive
{ssl, _, Bytes} ->
ssl_active_recv(N-length(Bytes), Acc ++ Bytes)
end.
send_recv_result_timeout_client(Socket) ->
{error, timeout} = ssl:recv(Socket, 11, 500),
{error, timeout} = ssl:recv(Socket, 11, 0),
ssl:send(Socket, "Hello world"),
receive
Msg ->
io:format("Msg ~p~n",[Msg])
after 500 ->
ok
end,
{ok, "Hello world"} = ssl:recv(Socket, 11, 500),
ok.
send_recv_result_timeout_server(Socket) ->
ssl:send(Socket, "Hello"),
{ok, "Hello world"} = ssl:recv(Socket, 11),
ssl:send(Socket, " world"),
ok.
do_recv_close(Socket) ->
{error, closed} = ssl:recv(Socket, 11),
receive
{_,{error,closed}} ->
error_extra_close_sent_to_user_process
after 500 ->
ok
end.
tls_close(Socket) ->
ok = ssl_test_lib:send_recv_result(Socket),
case ssl:close(Socket, 5000) of
ok ->
ok;
{error, closed} ->
ok;
Other ->
ct:fail(Other)
end.
run_error_server_close([Pid | Opts]) ->
{ok, Listen} = ssl:listen(0, Opts),
{ok,{_, Port}} = ssl:sockname(Listen),
Pid ! {self(), Port},
{ok, Socket} = ssl:transport_accept(Listen),
Pid ! ssl:close(Socket).
run_error_server([ Pid | Opts]) ->
{ok, Listen} = ssl:listen(0, Opts),
{ok,{_, Port}} = ssl:sockname(Listen),
Pid ! {self(), Port},
{ok, Socket} = ssl:transport_accept(Listen),
Pid ! ssl:controlling_process(Socket, self()).
run_client_error([Port, Opts]) ->
ssl:connect("localhost", Port, Opts).
honor_cipher_order(Config, Honor, ServerCiphers, ClientCiphers, Expected) ->
ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config),
ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config),
{ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config),
Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0},
{from, self()},
{mfa, {?MODULE, connection_info_result, []}},
{options, [{ciphers, ServerCiphers}, {honor_cipher_order, Honor}
| ServerOpts]}]),
Port = ssl_test_lib:inet_port(Server),
Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port},
{host, Hostname},
{from, self()},
{mfa, {?MODULE, connection_info_result, []}},
{options, [{ciphers, ClientCiphers}, {honor_cipher_order, Honor}
| ClientOpts]}]),
Version = ssl_test_lib:protocol_version(Config),
ServerMsg = ClientMsg = {ok, {Version, Expected}},
ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg),
ssl_test_lib:close(Server),
ssl_test_lib:close(Client).
connection_info_result(Socket) ->
{ok, Info} = ssl:connection_information(Socket, [protocol, selected_cipher_suite]),
{ok, {proplists:get_value(protocol, Info), proplists:get_value(selected_cipher_suite, Info)}}.
der_input_opts(Opts) ->
Certfile = proplists:get_value(certfile, Opts),
CaCertsfile = proplists:get_value(cacertfile, Opts),
Keyfile = proplists:get_value(keyfile, Opts),
Dhfile = proplists:get_value(dhfile, Opts),
[{_, Cert, _}] = ssl_test_lib:pem_to_der(Certfile),
[{Asn1Type, Key, _}] = ssl_test_lib:pem_to_der(Keyfile),
[{_, DHParams, _}] = ssl_test_lib:pem_to_der(Dhfile),
CaCerts =
lists:map(fun(Entry) ->
{_, CaCert, _} = Entry,
CaCert
end, ssl_test_lib:pem_to_der(CaCertsfile)),
{Cert, {Asn1Type, Key}, CaCerts, DHParams}.
