%%
%% %CopyrightBegin%
%%
%% Copyright Ericsson AB 2017-2018. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
%% You may obtain a copy of the License at
%%
%% http://www.apache.org/licenses/LICENSE-2.0
%%
%% Unless required by applicable law or agreed to in writing, software
%% distributed under the License is distributed on an "AS IS" BASIS,
%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%% See the License for the specific language governing permissions and
%% limitations under the License.
%%
%% %CopyrightEnd%
%%
%%
%% [RFC 3986, Chapter 2.2. Reserved Characters]
%%
%% reserved = gen-delims / sub-delims
%%
%% gen-delims = ":" / "/" / "?" / "#" / "[" / "]" / "@"
%%
%% sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
%% / "*" / "+" / "," / ";" / "="
%%
%%
%% [RFC 3986, Chapter 2.3. Unreserved Characters]
%%
%% unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
%%
%%
%% [RFC 3986, Chapter 3. Syntax Components]
%%
%% The generic URI syntax consists of a hierarchical sequence of
%% components referred to as the scheme, authority, path, query, and
%% fragment.
%%
%% URI = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
%%
%% hier-part = "//" authority path-abempty
%% / path-absolute
%% / path-rootless
%% / path-empty
%%
%% The scheme and path components are required, though the path may be
%% empty (no characters). When authority is present, the path must
%% either be empty or begin with a slash ("/") character. When
%% authority is not present, the path cannot begin with two slash
%% characters ("//"). These restrictions result in five different ABNF
%% rules for a path (Section 3.3), only one of which will match any
%% given URI reference.
%%
%% The following are two example URIs and their component parts:
%%
%% foo://example.com:8042/over/there?name=ferret#nose
%% \_/ \______________/\_________/ \_________/ \__/
%% | | | | |
%% scheme authority path query fragment
%% | _____________________|__
%% / \ / \
%% urn:example:animal:ferret:nose
%%
%%
%% [RFC 3986, Chapter 3.1. Scheme]
%%
%% Each URI begins with a scheme name that refers to a specification for
%% assigning identifiers within that scheme.
%%
%% scheme = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
%%
%%
%% [RFC 3986, Chapter 3.2. Authority]
%%
%% Many URI schemes include a hierarchical element for a naming
%% authority so that governance of the name space defined by the
%% remainder of the URI is delegated to that authority (which may, in
%% turn, delegate it further).
%%
%% authority = [ userinfo "@" ] host [ ":" port ]
%%
%%
%% [RFC 3986, Chapter 3.2.1. User Information]
%%
%% The userinfo subcomponent may consist of a user name and, optionally,
%% scheme-specific information about how to gain authorization to access
%% the resource. The user information, if present, is followed by a
%% commercial at-sign ("@") that delimits it from the host.
%%
%% userinfo = *( unreserved / pct-encoded / sub-delims / ":" )
%%
%%
%% [RFC 3986, Chapter 3.2.2. Host]
%%
%% The host subcomponent of authority is identified by an IP literal
%% encapsulated within square brackets, an IPv4 address in dotted-
%% decimal form, or a registered name.
%%
%% host = IP-literal / IPv4address / reg-name
%%
%% IP-literal = "[" ( IPv6address / IPvFuture ) "]"
%%
%% IPvFuture = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
%%
%% IPv6address = 6( h16 ":" ) ls32
%% / "::" 5( h16 ":" ) ls32
%% / [ h16 ] "::" 4( h16 ":" ) ls32
%% / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
%% / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
%% / [ *3( h16 ":" ) h16 ] "::" h16 ":" ls32
%% / [ *4( h16 ":" ) h16 ] "::" ls32
%% / [ *5( h16 ":" ) h16 ] "::" h16
%% / [ *6( h16 ":" ) h16 ] "::"
%%
%% ls32 = ( h16 ":" h16 ) / IPv4address
%% ; least-significant 32 bits of address
%%
%% h16 = 1*4HEXDIG
%% ; 16 bits of address represented in hexadecimal
%%
%% IPv4address = dec-octet "." dec-octet "." dec-octet "." dec-octet
%%
%% dec-octet = DIGIT ; 0-9
%% / %x31-39 DIGIT ; 10-99
%% / "1" 2DIGIT ; 100-199
%% / "2" %x30-34 DIGIT ; 200-249
%% / "25" %x30-35 ; 250-255
%%
%% reg-name = *( unreserved / pct-encoded / sub-delims )
%%
%%
%% [RFC 3986, Chapter 3.2.2. Port]
%%
%% The port subcomponent of authority is designated by an optional port
%% number in decimal following the host and delimited from it by a
%% single colon (":") character.
%%
%% port = *DIGIT
%%
%%
%% [RFC 3986, Chapter 3.3. Path]
%%
%% The path component contains data, usually organized in hierarchical
%% form, that, along with data in the non-hierarchical query component
%% (Section 3.4), serves to identify a resource within the scope of the
%% URI's scheme and naming authority (if any). The path is terminated
%% by the first question mark ("?") or number sign ("#") character, or
%% by the end of the URI.
%%
%% path = path-abempty ; begins with "/" or is empty
%% / path-absolute ; begins with "/" but not "//"
%% / path-noscheme ; begins with a non-colon segment
%% / path-rootless ; begins with a segment
%% / path-empty ; zero characters
%%
%% path-abempty = *( "/" segment )
%% path-absolute = "/" [ segment-nz *( "/" segment ) ]
%% path-noscheme = segment-nz-nc *( "/" segment )
%% path-rootless = segment-nz *( "/" segment )
%% path-empty = 0<pchar>
%% segment = *pchar
%% segment-nz = 1*pchar
%% segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
%% ; non-zero-length segment without any colon ":"
%%
%% pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
%%
%%
%% [RFC 3986, Chapter 3.4. Query]
%%
%% The query component contains non-hierarchical data that, along with
%% data in the path component (Section 3.3), serves to identify a
%% resource within the scope of the URI's scheme and naming authority
%% (if any). The query component is indicated by the first question
%% mark ("?") character and terminated by a number sign ("#") character
%% or by the end of the URI.
%%
%% query = *( pchar / "/" / "?" )
%%
%%
%% [RFC 3986, Chapter 3.5. Fragment]
%%
%% The fragment identifier component of a URI allows indirect
%% identification of a secondary resource by reference to a primary
%% resource and additional identifying information.
%%
%% fragment = *( pchar / "/" / "?" )
%%
%%
%% [RFC 3986, Chapter 4.1. URI Reference]
%%
%% URI-reference is used to denote the most common usage of a resource
%% identifier.
%%
%% URI-reference = URI / relative-ref
%%
%%
%% [RFC 3986, Chapter 4.2. Relative Reference]
%%
%% A relative reference takes advantage of the hierarchical syntax
%% (Section 1.2.3) to express a URI reference relative to the name space
%% of another hierarchical URI.
%%
%% relative-ref = relative-part [ "?" query ] [ "#" fragment ]
%%
%% relative-part = "//" authority path-abempty
%% / path-absolute
%% / path-noscheme
%% / path-empty
%%
%%
%% [RFC 3986, Chapter 4.3. Absolute URI]
%%
%% Some protocol elements allow only the absolute form of a URI without
%% a fragment identifier. For example, defining a base URI for later
%% use by relative references calls for an absolute-URI syntax rule that
%% does not allow a fragment.
%%
%% absolute-URI = scheme ":" hier-part [ "?" query ]
%%
-module(uri_string).
%%-------------------------------------------------------------------------
%% External API
%%-------------------------------------------------------------------------
-export([compose_query/1, compose_query/2,
dissect_query/1, normalize/1, normalize/2, parse/1,
recompose/1, transcode/2]).
-export_type([error/0, uri_map/0, uri_string/0]).
%%-------------------------------------------------------------------------
%% Internal API
%%-------------------------------------------------------------------------
-export([is_host/1, is_path/1]). % suppress warnings
%%-------------------------------------------------------------------------
%% Macros
%%-------------------------------------------------------------------------
-define(CHAR(Char), <<Char/utf8>>).
-define(STRING_EMPTY, <<>>).
-define(STRING(MatchStr), <<MatchStr/binary>>).
-define(STRING_REST(MatchStr, Rest), <<MatchStr/utf8, Rest/binary>>).
-define(DEC2HEX(X),
if ((X) >= 0) andalso ((X) =< 9) -> (X) + $0;
((X) >= 10) andalso ((X) =< 15) -> (X) + $A - 10
end).
-define(HEX2DEC(X),
if ((X) >= $0) andalso ((X) =< $9) -> (X) - $0;
((X) >= $A) andalso ((X) =< $F) -> (X) - $A + 10;
((X) >= $a) andalso ((X) =< $f) -> (X) - $a + 10
end).
%%%=========================================================================
%%% API
%%%=========================================================================
%%-------------------------------------------------------------------------
%% URI compliant with RFC 3986
%% ASCII %x21 - %x7A ("!" - "z") except
%% %x34 " double quote
%% %x60 < less than
%% %x62 > greater than
%% %x92 \ backslash
%% %x94 ^ caret / circumflex
%% %x96 ` grave / accent
%%-------------------------------------------------------------------------
-type uri_string() :: iodata().
-type error() :: {error, atom(), term()}.
%%-------------------------------------------------------------------------
%% RFC 3986, Chapter 3. Syntax Components
%%-------------------------------------------------------------------------
-type uri_map() ::
#{fragment => unicode:chardata(),
host => unicode:chardata(),
path => unicode:chardata(),
port => non_neg_integer() | undefined,
query => unicode:chardata(),
scheme => unicode:chardata(),
userinfo => unicode:chardata()} | #{}.
%%-------------------------------------------------------------------------
%% Normalize URIs
%%-------------------------------------------------------------------------
-spec normalize(URI) -> NormalizedURI when
URI :: uri_string() | uri_map(),
NormalizedURI :: uri_string()
| error().
normalize(URIMap) ->
try normalize(URIMap, [])
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end.
-spec normalize(URI, Options) -> NormalizedURI when
URI :: uri_string() | uri_map(),
Options :: [return_map],
NormalizedURI :: uri_string() | uri_map().
normalize(URIMap, []) when is_map(URIMap) ->
recompose(normalize_map(URIMap));
normalize(URIMap, [return_map]) when is_map(URIMap) ->
normalize_map(URIMap);
normalize(URIString, []) ->
case parse(URIString) of
Value when is_map(Value) ->
recompose(normalize_map(Value));
Error ->
Error
end;
normalize(URIString, [return_map]) ->
case parse(URIString) of
Value when is_map(Value) ->
normalize_map(Value);
Error ->
Error
end.
%%-------------------------------------------------------------------------
%% Parse URIs
%%-------------------------------------------------------------------------
-spec parse(URIString) -> URIMap when
URIString :: uri_string(),
URIMap :: uri_map()
| error().
parse(URIString) when is_binary(URIString) ->
try parse_uri_reference(URIString, #{})
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end;
parse(URIString) when is_list(URIString) ->
try
Binary = unicode:characters_to_binary(URIString),
Map = parse_uri_reference(Binary, #{}),
convert_mapfields_to_list(Map)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end.
%%-------------------------------------------------------------------------
%% Recompose URIs
%%-------------------------------------------------------------------------
-spec recompose(URIMap) -> URIString when
URIMap :: uri_map(),
URIString :: uri_string()
| error().
recompose(Map) ->
case is_valid_map(Map) of
false ->
{error, invalid_map, Map};
true ->
try
T0 = update_scheme(Map, empty),
T1 = update_userinfo(Map, T0),
T2 = update_host(Map, T1),
T3 = update_port(Map, T2),
T4 = update_path(Map, T3),
T5 = update_query(Map, T4),
update_fragment(Map, T5)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end
end.
%%-------------------------------------------------------------------------
%% Transcode URIs
%%-------------------------------------------------------------------------
-spec transcode(URIString, Options) -> Result when
URIString :: uri_string(),
Options :: [{in_encoding, unicode:encoding()}|{out_encoding, unicode:encoding()}],
Result :: uri_string()
| error().
transcode(URIString, Options) when is_binary(URIString) ->
try
InEnc = proplists:get_value(in_encoding, Options, utf8),
OutEnc = proplists:get_value(out_encoding, Options, utf8),
List = convert_to_list(URIString, InEnc),
Output = transcode(List, [], InEnc, OutEnc),
convert_to_binary(Output, utf8, OutEnc)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end;
transcode(URIString, Options) when is_list(URIString) ->
InEnc = proplists:get_value(in_encoding, Options, utf8),
OutEnc = proplists:get_value(out_encoding, Options, utf8),
Flattened = flatten_list(URIString, InEnc),
try transcode(Flattened, [], InEnc, OutEnc)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end.
%%-------------------------------------------------------------------------
%% Functions for working with the query part of a URI as a list
%% of key/value pairs.
%% HTML 5.2 - 4.10.21.6 URL-encoded form data - WHATWG URL (10 Jan 2018) - UTF-8
%% HTML 5.0 - 4.10.22.6 URL-encoded form data - non UTF-8
%%-------------------------------------------------------------------------
%%-------------------------------------------------------------------------
%% Compose urlencoded query string from a list of unescaped key/value pairs.
%% (application/x-www-form-urlencoded encoding algorithm)
%%-------------------------------------------------------------------------
-spec compose_query(QueryList) -> QueryString when
QueryList :: [{unicode:chardata(), unicode:chardata() | true}],
QueryString :: uri_string()
| error().
compose_query(List) ->
compose_query(List, [{encoding, utf8}]).
-spec compose_query(QueryList, Options) -> QueryString when
QueryList :: [{unicode:chardata(), unicode:chardata() | true}],
Options :: [{encoding, atom()}],
QueryString :: uri_string()
| error().
compose_query([],_Options) ->
[];
compose_query(List, Options) ->
try compose_query(List, Options, false, <<>>)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end.
%%
compose_query([{Key,true}|Rest], Options, IsList, Acc) ->
Separator = get_separator(Rest),
K = form_urlencode(Key, Options),
IsListNew = IsList orelse is_list(Key),
compose_query(Rest, Options, IsListNew, <<Acc/binary,K/binary,Separator/binary>>);
compose_query([{Key,Value}|Rest], Options, IsList, Acc) ->
Separator = get_separator(Rest),
K = form_urlencode(Key, Options),
V = form_urlencode(Value, Options),
IsListNew = IsList orelse is_list(Key) orelse is_list(Value),
compose_query(Rest, Options, IsListNew, <<Acc/binary,K/binary,"=",V/binary,Separator/binary>>);
compose_query([], _Options, IsList, Acc) ->
case IsList of
true -> convert_to_list(Acc, utf8);
false -> Acc
end.
%%-------------------------------------------------------------------------
%% Dissect a query string into a list of unescaped key/value pairs.
%% (application/x-www-form-urlencoded decoding algorithm)
%%-------------------------------------------------------------------------
-spec dissect_query(QueryString) -> QueryList when
QueryString :: uri_string(),
QueryList :: [{unicode:chardata(), unicode:chardata() | true}]
| error().
dissect_query(<<>>) ->
[];
dissect_query([]) ->
[];
dissect_query(QueryString) when is_list(QueryString) ->
try
B = convert_to_binary(QueryString, utf8, utf8),
dissect_query_key(B, true, [], <<>>, <<>>)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end;
dissect_query(QueryString) ->
try dissect_query_key(QueryString, false, [], <<>>, <<>>)
catch
throw:{error, Atom, RestData} -> {error, Atom, RestData}
end.
%%%========================================================================
%%% Internal functions
%%%========================================================================
%%-------------------------------------------------------------------------
%% Converts Map fields to lists
%%-------------------------------------------------------------------------
convert_mapfields_to_list(Map) ->
Fun = fun (_, V) when is_binary(V) -> unicode:characters_to_list(V);
(_, V) -> V end,
maps:map(Fun, Map).
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 4.1. URI Reference]
%%
%% URI-reference is used to denote the most common usage of a resource
%% identifier.
%%
%% URI-reference = URI / relative-ref
%%-------------------------------------------------------------------------
-spec parse_uri_reference(binary(), uri_map()) -> uri_map().
parse_uri_reference(<<>>, _) -> #{path => <<>>};
parse_uri_reference(URIString, URI) ->
try parse_scheme_start(URIString, URI)
catch
throw:{_,_,_} ->
parse_relative_part(URIString, URI)
end.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 4.2. Relative Reference]
%%
%% A relative reference takes advantage of the hierarchical syntax
%% (Section 1.2.3) to express a URI reference relative to the name space
%% of another hierarchical URI.
%%
%% relative-ref = relative-part [ "?" query ] [ "#" fragment ]
%%
%% relative-part = "//" authority path-abempty
%% / path-absolute
%% / path-noscheme
%% / path-empty
%%-------------------------------------------------------------------------
-spec parse_relative_part(binary(), uri_map()) -> uri_map().
parse_relative_part(?STRING_REST("//", Rest), URI) ->
%% Parse userinfo - "//" is NOT part of authority
try parse_userinfo(Rest, URI) of
{T, URI1} ->
Userinfo = calculate_parsed_userinfo(Rest, T),
URI2 = maybe_add_path(URI1),
URI2#{userinfo => Userinfo}
catch
throw:{_,_,_} ->
{T, URI1} = parse_host(Rest, URI),
Host = calculate_parsed_host_port(Rest, T),
URI2 = maybe_add_path(URI1),
URI2#{host => remove_brackets(Host)}
end;
parse_relative_part(?STRING_REST($/, Rest), URI) ->
{T, URI1} = parse_segment(Rest, URI), % path-absolute
Path = calculate_parsed_part(Rest, T),
URI1#{path => ?STRING_REST($/, Path)};
parse_relative_part(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
URI2 = maybe_add_path(URI1),
URI2#{query => Query};
parse_relative_part(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
URI2 = maybe_add_path(URI1),
URI2#{fragment => Fragment};
parse_relative_part(?STRING_REST(Char, Rest), URI) ->
case is_segment_nz_nc(Char) of
true ->
{T, URI1} = parse_segment_nz_nc(Rest, URI), % path-noscheme
Path = calculate_parsed_part(Rest, T),
URI1#{path => ?STRING_REST(Char, Path)};
false -> throw({error,invalid_uri,[Char]})
end.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.3. Path]
%%
%% The path component contains data, usually organized in hierarchical
%% form, that, along with data in the non-hierarchical query component
%% (Section 3.4), serves to identify a resource within the scope of the
%% URI's scheme and naming authority (if any). The path is terminated
%% by the first question mark ("?") or number sign ("#") character, or
%% by the end of the URI.
%%
%% path = path-abempty ; begins with "/" or is empty
%% / path-absolute ; begins with "/" but not "//"
%% / path-noscheme ; begins with a non-colon segment
%% / path-rootless ; begins with a segment
%% / path-empty ; zero characters
%%
%% path-abempty = *( "/" segment )
%% path-absolute = "/" [ segment-nz *( "/" segment ) ]
%% path-noscheme = segment-nz-nc *( "/" segment )
%% path-rootless = segment-nz *( "/" segment )
%% path-empty = 0<pchar>
%% segment = *pchar
%% segment-nz = 1*pchar
%% segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
%% ; non-zero-length segment without any colon ":"
%%
%% pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
%%-------------------------------------------------------------------------
%%-------------------------------------------------------------------------
%% path-abempty
%%-------------------------------------------------------------------------
-spec parse_segment(binary(), uri_map()) -> {binary(), uri_map()}.
parse_segment(?STRING_REST($/, Rest), URI) ->
parse_segment(Rest, URI); % segment
parse_segment(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_segment(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI),
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_segment(?STRING_REST(Char, Rest), URI) ->
case is_pchar(Char) of
true -> parse_segment(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_segment(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
%%-------------------------------------------------------------------------
%% path-noscheme
%%-------------------------------------------------------------------------
-spec parse_segment_nz_nc(binary(), uri_map()) -> {binary(), uri_map()}.
parse_segment_nz_nc(?STRING_REST($/, Rest), URI) ->
parse_segment(Rest, URI); % segment
parse_segment_nz_nc(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_segment_nz_nc(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI),
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_segment_nz_nc(?STRING_REST(Char, Rest), URI) ->
case is_segment_nz_nc(Char) of
true -> parse_segment_nz_nc(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_segment_nz_nc(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
%% Check if char is pchar.
-spec is_pchar(char()) -> boolean().
is_pchar($%) -> true; % pct-encoded
is_pchar($:) -> true;
is_pchar($@) -> true;
is_pchar(Char) -> is_unreserved(Char) orelse is_sub_delim(Char).
%% Check if char is segment_nz_nc.
-spec is_segment_nz_nc(char()) -> boolean().
is_segment_nz_nc($%) -> true; % pct-encoded
is_segment_nz_nc($@) -> true;
is_segment_nz_nc(Char) -> is_unreserved(Char) orelse is_sub_delim(Char).
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.1. Scheme]
%%
%% Each URI begins with a scheme name that refers to a specification for
%% assigning identifiers within that scheme.
%%
%% scheme = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
%%-------------------------------------------------------------------------
-spec parse_scheme_start(binary(), uri_map()) -> uri_map().
parse_scheme_start(?STRING_REST(Char, Rest), URI) ->
case is_alpha(Char) of
true -> {T, URI1} = parse_scheme(Rest, URI),
Scheme = calculate_parsed_scheme(Rest, T),
URI2 = maybe_add_path(URI1),
URI2#{scheme => ?STRING_REST(Char, Scheme)};
false -> throw({error,invalid_uri,[Char]})
end.
%% Add path component if it missing after parsing the URI.
%% According to the URI specification there is always a
%% path component in every URI-reference and it can be
%% empty.
maybe_add_path(Map) ->
case maps:is_key(path, Map) of
false ->
Map#{path => <<>>};
_Else ->
Map
end.
-spec parse_scheme(binary(), uri_map()) -> {binary(), uri_map()}.
parse_scheme(?STRING_REST($:, Rest), URI) ->
{_, URI1} = parse_hier(Rest, URI),
{Rest, URI1};
parse_scheme(?STRING_REST(Char, Rest), URI) ->
case is_scheme(Char) of
true -> parse_scheme(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_scheme(?STRING_EMPTY, _URI) ->
throw({error,invalid_uri,<<>>}).
%% Check if char is allowed in scheme
-spec is_scheme(char()) -> boolean().
is_scheme($+) -> true;
is_scheme($-) -> true;
is_scheme($.) -> true;
is_scheme(Char) -> is_alpha(Char) orelse is_digit(Char).
%%-------------------------------------------------------------------------
%% hier-part = "//" authority path-abempty
%% / path-absolute
%% / path-rootless
%% / path-empty
%%-------------------------------------------------------------------------
-spec parse_hier(binary(), uri_map()) -> {binary(), uri_map()}.
parse_hier(?STRING_REST("//", Rest), URI) ->
% Parse userinfo - "//" is NOT part of authority
try parse_userinfo(Rest, URI) of
{T, URI1} ->
Userinfo = calculate_parsed_userinfo(Rest, T),
{Rest, URI1#{userinfo => Userinfo}}
catch
throw:{_,_,_} ->
{T, URI1} = parse_host(Rest, URI),
Host = calculate_parsed_host_port(Rest, T),
{Rest, URI1#{host => remove_brackets(Host)}}
end;
parse_hier(?STRING_REST($/, Rest), URI) ->
{T, URI1} = parse_segment(Rest, URI), % path-absolute
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST($/, Path)}};
parse_hier(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_hier(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_hier(?STRING_REST(Char, Rest), URI) -> % path-rootless
case is_pchar(Char) of
true -> % segment_nz
{T, URI1} = parse_segment(Rest, URI),
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST(Char, Path)}};
false -> throw({error,invalid_uri,[Char]})
end;
parse_hier(?STRING_EMPTY, URI) ->
{<<>>, URI}.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.2. Authority]
%%
%% Many URI schemes include a hierarchical element for a naming
%% authority so that governance of the name space defined by the
%% remainder of the URI is delegated to that authority (which may, in
%% turn, delegate it further).
%%
%% The authority component is preceded by a double slash ("//") and is
%% terminated by the next slash ("/"), question mark ("?"), or number
%% sign ("#") character, or by the end of the URI.
%%
%% authority = [ userinfo "@" ] host [ ":" port ]
%%
%%
%% [RFC 3986, Chapter 3.2.1. User Information]
%%
%% The userinfo subcomponent may consist of a user name and, optionally,
%% scheme-specific information about how to gain authorization to access
%% the resource. The user information, if present, is followed by a
%% commercial at-sign ("@") that delimits it from the host.
%%
%% userinfo = *( unreserved / pct-encoded / sub-delims / ":" )
%%-------------------------------------------------------------------------
-spec parse_userinfo(binary(), uri_map()) -> {binary(), uri_map()}.
parse_userinfo(?CHAR($@), URI) ->
{?STRING_EMPTY, URI#{host => <<>>}};
parse_userinfo(?STRING_REST($@, Rest), URI) ->
{T, URI1} = parse_host(Rest, URI),
Host = calculate_parsed_host_port(Rest, T),
{Rest, URI1#{host => remove_brackets(Host)}};
parse_userinfo(?STRING_REST(Char, Rest), URI) ->
case is_userinfo(Char) of
true -> parse_userinfo(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_userinfo(?STRING_EMPTY, _URI) ->
%% URI cannot end in userinfo state
throw({error,invalid_uri,<<>>}).
%% Check if char is allowed in userinfo
-spec is_userinfo(char()) -> boolean().
is_userinfo($%) -> true; % pct-encoded
is_userinfo($:) -> true;
is_userinfo(Char) -> is_unreserved(Char) orelse is_sub_delim(Char).
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.2.2. Host]
%%
%% The host subcomponent of authority is identified by an IP literal
%% encapsulated within square brackets, an IPv4 address in dotted-
%% decimal form, or a registered name.
%%
%% host = IP-literal / IPv4address / reg-name
%%
%% IP-literal = "[" ( IPv6address / IPvFuture ) "]"
%%
%% IPvFuture = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
%%
%% IPv6address = 6( h16 ":" ) ls32
%% / "::" 5( h16 ":" ) ls32
%% / [ h16 ] "::" 4( h16 ":" ) ls32
%% / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
%% / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
%% / [ *3( h16 ":" ) h16 ] "::" h16 ":" ls32
%% / [ *4( h16 ":" ) h16 ] "::" ls32
%% / [ *5( h16 ":" ) h16 ] "::" h16
%% / [ *6( h16 ":" ) h16 ] "::"
%%
%% ls32 = ( h16 ":" h16 ) / IPv4address
%% ; least-significant 32 bits of address
%%
%% h16 = 1*4HEXDIG
%% ; 16 bits of address represented in hexadecimal
%%
%% IPv4address = dec-octet "." dec-octet "." dec-octet "." dec-octet
%%
%% dec-octet = DIGIT ; 0-9
%% / %x31-39 DIGIT ; 10-99
%% / "1" 2DIGIT ; 100-199
%% / "2" %x30-34 DIGIT ; 200-249
%% / "25" %x30-35 ; 250-255
%%
%% reg-name = *( unreserved / pct-encoded / sub-delims )
%%-------------------------------------------------------------------------
-spec parse_host(binary(), uri_map()) -> {binary(), uri_map()}.
parse_host(?STRING_REST($:, Rest), URI) ->
{T, URI1} = parse_port(Rest, URI),
H = calculate_parsed_host_port(Rest, T),
Port = get_port(H),
{Rest, URI1#{port => Port}};
parse_host(?STRING_REST($/, Rest), URI) ->
{T, URI1} = parse_segment(Rest, URI), % path-abempty
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST($/, Path)}};
parse_host(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_host(?STRING_REST($[, Rest), URI) ->
parse_ipv6_bin(Rest, [], URI);
parse_host(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_host(?STRING_REST(Char, Rest), URI) ->
case is_digit(Char) of
true ->
try parse_ipv4_bin(Rest, [Char], URI)
catch
throw:{_,_,_} ->
parse_reg_name(?STRING_REST(Char, Rest), URI)
end;
false -> parse_reg_name(?STRING_REST(Char, Rest), URI)
end;
parse_host(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
-spec parse_reg_name(binary(), uri_map()) -> {binary(), uri_map()}.
parse_reg_name(?STRING_REST($:, Rest), URI) ->
{T, URI1} = parse_port(Rest, URI),
H = calculate_parsed_host_port(Rest, T),
Port = get_port(H),
{Rest, URI1#{port => Port}};
parse_reg_name(?STRING_REST($/, Rest), URI) ->
{T, URI1} = parse_segment(Rest, URI), % path-abempty
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST($/, Path)}};
parse_reg_name(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_reg_name(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_reg_name(?STRING_REST(Char, Rest), URI) ->
case is_reg_name(Char) of
true -> parse_reg_name(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_reg_name(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
%% Check if char is allowed in reg-name
-spec is_reg_name(char()) -> boolean().
is_reg_name($%) -> true;
is_reg_name(Char) -> is_unreserved(Char) orelse is_sub_delim(Char).
-spec parse_ipv4_bin(binary(), list(), uri_map()) -> {binary(), uri_map()}.
parse_ipv4_bin(?STRING_REST($:, Rest), Acc, URI) ->
_ = validate_ipv4_address(lists:reverse(Acc)),
{T, URI1} = parse_port(Rest, URI),
H = calculate_parsed_host_port(Rest, T),
Port = get_port(H),
{Rest, URI1#{port => Port}};
parse_ipv4_bin(?STRING_REST($/, Rest), Acc, URI) ->
_ = validate_ipv4_address(lists:reverse(Acc)),
{T, URI1} = parse_segment(Rest, URI), % path-abempty
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST($/, Path)}};
parse_ipv4_bin(?STRING_REST($?, Rest), Acc, URI) ->
_ = validate_ipv4_address(lists:reverse(Acc)),
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_ipv4_bin(?STRING_REST($#, Rest), Acc, URI) ->
_ = validate_ipv4_address(lists:reverse(Acc)),
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_ipv4_bin(?STRING_REST(Char, Rest), Acc, URI) ->
case is_ipv4(Char) of
true -> parse_ipv4_bin(Rest, [Char|Acc], URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_ipv4_bin(?STRING_EMPTY, Acc, URI) ->
_ = validate_ipv4_address(lists:reverse(Acc)),
{?STRING_EMPTY, URI}.
%% Check if char is allowed in IPv4 addresses
-spec is_ipv4(char()) -> boolean().
is_ipv4($.) -> true;
is_ipv4(Char) -> is_digit(Char).
-spec validate_ipv4_address(list()) -> list().
validate_ipv4_address(Addr) ->
case inet:parse_ipv4strict_address(Addr) of
{ok, _} -> Addr;
{error, _} -> throw({error,invalid_uri,Addr})
end.
-spec parse_ipv6_bin(binary(), list(), uri_map()) -> {binary(), uri_map()}.
parse_ipv6_bin(?STRING_REST($], Rest), Acc, URI) ->
_ = validate_ipv6_address(lists:reverse(Acc)),
parse_ipv6_bin_end(Rest, URI);
parse_ipv6_bin(?STRING_REST(Char, Rest), Acc, URI) ->
case is_ipv6(Char) of
true -> parse_ipv6_bin(Rest, [Char|Acc], URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_ipv6_bin(?STRING_EMPTY, _Acc, _URI) ->
throw({error,invalid_uri,<<>>}).
%% Check if char is allowed in IPv6 addresses
-spec is_ipv6(char()) -> boolean().
is_ipv6($:) -> true;
is_ipv6($.) -> true;
is_ipv6(Char) -> is_hex_digit(Char).
-spec parse_ipv6_bin_end(binary(), uri_map()) -> {binary(), uri_map()}.
parse_ipv6_bin_end(?STRING_REST($:, Rest), URI) ->
{T, URI1} = parse_port(Rest, URI),
H = calculate_parsed_host_port(Rest, T),
Port = get_port(H),
{Rest, URI1#{port => Port}};
parse_ipv6_bin_end(?STRING_REST($/, Rest), URI) ->
{T, URI1} = parse_segment(Rest, URI), % path-abempty
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST($/, Path)}};
parse_ipv6_bin_end(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_ipv6_bin_end(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_ipv6_bin_end(?STRING_REST(Char, Rest), URI) ->
case is_ipv6(Char) of
true -> parse_ipv6_bin_end(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_ipv6_bin_end(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
-spec validate_ipv6_address(list()) -> list().
validate_ipv6_address(Addr) ->
case inet:parse_ipv6strict_address(Addr) of
{ok, _} -> Addr;
{error, _} -> throw({error,invalid_uri,Addr})
end.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.2.2. Port]
%%
%% The port subcomponent of authority is designated by an optional port
%% number in decimal following the host and delimited from it by a
%% single colon (":") character.
%%
%% port = *DIGIT
%%-------------------------------------------------------------------------
-spec parse_port(binary(), uri_map()) -> {binary(), uri_map()}.
parse_port(?STRING_REST($/, Rest), URI) ->
{T, URI1} = parse_segment(Rest, URI), % path-abempty
Path = calculate_parsed_part(Rest, T),
{Rest, URI1#{path => ?STRING_REST($/, Path)}};
parse_port(?STRING_REST($?, Rest), URI) ->
{T, URI1} = parse_query(Rest, URI), % path-empty ?query
Query = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{query => Query}};
parse_port(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI), % path-empty
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_port(?STRING_REST(Char, Rest), URI) ->
case is_digit(Char) of
true -> parse_port(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_port(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.4. Query]
%%
%% The query component contains non-hierarchical data that, along with
%% data in the path component (Section 3.3), serves to identify a
%% resource within the scope of the URI's scheme and naming authority
%% (if any). The query component is indicated by the first question
%% mark ("?") character and terminated by a number sign ("#") character
%% or by the end of the URI.
%%
%% query = *( pchar / "/" / "?" )
%%-------------------------------------------------------------------------
-spec parse_query(binary(), uri_map()) -> {binary(), uri_map()}.
parse_query(?STRING_REST($#, Rest), URI) ->
{T, URI1} = parse_fragment(Rest, URI),
Fragment = calculate_parsed_query_fragment(Rest, T),
{Rest, URI1#{fragment => Fragment}};
parse_query(?STRING_REST(Char, Rest), URI) ->
case is_query(Char) of
true -> parse_query(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_query(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
%% Check if char is allowed in query
-spec is_query(char()) -> boolean().
is_query($/) -> true;
is_query($?) -> true;
is_query(Char) -> is_pchar(Char).
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 3.5. Fragment]
%%
%% The fragment identifier component of a URI allows indirect
%% identification of a secondary resource by reference to a primary
%% resource and additional identifying information.
%%
%% fragment = *( pchar / "/" / "?" )
%%-------------------------------------------------------------------------
-spec parse_fragment(binary(), uri_map()) -> {binary(), uri_map()}.
parse_fragment(?STRING_REST(Char, Rest), URI) ->
case is_fragment(Char) of
true -> parse_fragment(Rest, URI);
false -> throw({error,invalid_uri,[Char]})
end;
parse_fragment(?STRING_EMPTY, URI) ->
{?STRING_EMPTY, URI}.
%% Check if char is allowed in fragment
-spec is_fragment(char()) -> boolean().
is_fragment($/) -> true;
is_fragment($?) -> true;
is_fragment(Char) -> is_pchar(Char).
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 2.2. Reserved Characters]
%%
%% reserved = gen-delims / sub-delims
%%
%% gen-delims = ":" / "/" / "?" / "#" / "[" / "]" / "@"
%%
%% sub-delims = "!" / "$" / "&" / "'" / "(" / ")"
%% / "*" / "+" / "," / ";" / "="
%%
%%-------------------------------------------------------------------------
%% Return true if input char is reserved.
-spec is_reserved(char()) -> boolean().
is_reserved($:) -> true;
is_reserved($/) -> true;
is_reserved($?) -> true;
is_reserved($#) -> true;
is_reserved($[) -> true;
is_reserved($]) -> true;
is_reserved($@) -> true;
is_reserved($!) -> true;
is_reserved($$) -> true;
is_reserved($&) -> true;
is_reserved($') -> true;
is_reserved($() -> true;
is_reserved($)) -> true;
is_reserved($*) -> true;
is_reserved($+) -> true;
is_reserved($,) -> true;
is_reserved($;) -> true;
is_reserved($=) -> true;
is_reserved(_) -> false.
%% Check if char is sub-delim.
-spec is_sub_delim(char()) -> boolean().
is_sub_delim($!) -> true;
is_sub_delim($$) -> true;
is_sub_delim($&) -> true;
is_sub_delim($') -> true;
is_sub_delim($() -> true;
is_sub_delim($)) -> true;
is_sub_delim($*) -> true;
is_sub_delim($+) -> true;
is_sub_delim($,) -> true;
is_sub_delim($;) -> true;
is_sub_delim($=) -> true;
is_sub_delim(_) -> false.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 2.3. Unreserved Characters]
%%
%% unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
%%
%%-------------------------------------------------------------------------
-spec is_unreserved(char()) -> boolean().
is_unreserved($-) -> true;
is_unreserved($.) -> true;
is_unreserved($_) -> true;
is_unreserved($~) -> true;
is_unreserved(Char) -> is_alpha(Char) orelse is_digit(Char).
-spec is_alpha(char()) -> boolean().
is_alpha(C)
when $A =< C, C =< $Z;
$a =< C, C =< $z -> true;
is_alpha(_) -> false.
-spec is_digit(char()) -> boolean().
is_digit(C)
when $0 =< C, C =< $9 -> true;
is_digit(_) -> false.
-spec is_hex_digit(char()) -> boolean().
is_hex_digit(C)
when $0 =< C, C =< $9;$a =< C, C =< $f;$A =< C, C =< $F -> true;
is_hex_digit(_) -> false.
%% Remove enclosing brackets from binary
-spec remove_brackets(binary()) -> binary().
remove_brackets(<<$[/utf8, Rest/binary>>) ->
{H,T} = split_binary(Rest, byte_size(Rest) - 1),
case T =:= <<$]/utf8>> of
true -> H;
false -> Rest
end;
remove_brackets(Addr) -> Addr.
%%-------------------------------------------------------------------------
%% Helper functions for calculating the parsed binary.
%%-------------------------------------------------------------------------
-spec calculate_parsed_scheme(binary(), binary()) -> binary().
calculate_parsed_scheme(Input, <<>>) ->
strip_last_char(Input, [$:]);
calculate_parsed_scheme(Input, Unparsed) ->
get_parsed_binary(Input, Unparsed).
-spec calculate_parsed_part(binary(), binary()) -> binary().
calculate_parsed_part(Input, <<>>) ->
strip_last_char(Input, [$?,$#]);
calculate_parsed_part(Input, Unparsed) ->
get_parsed_binary(Input, Unparsed).
-spec calculate_parsed_userinfo(binary(), binary()) -> binary().
calculate_parsed_userinfo(Input, <<>>) ->
strip_last_char(Input, [$?,$#,$@]);
calculate_parsed_userinfo(Input, Unparsed) ->
get_parsed_binary(Input, Unparsed).
-spec calculate_parsed_host_port(binary(), binary()) -> binary().
calculate_parsed_host_port(Input, <<>>) ->
strip_last_char(Input, [$:,$?,$#,$/]);
calculate_parsed_host_port(Input, Unparsed) ->
get_parsed_binary(Input, Unparsed).
calculate_parsed_query_fragment(Input, <<>>) ->
strip_last_char(Input, [$#]);
calculate_parsed_query_fragment(Input, Unparsed) ->
get_parsed_binary(Input, Unparsed).
get_port(<<>>) ->
undefined;
get_port(B) ->
try binary_to_integer(B)
catch
error:badarg ->
throw({error, invalid_uri, B})
end.
%% Strip last char if it is in list
%%
%% This function is optimized for speed: parse/1 is about 10% faster than
%% with an alternative implementation based on lists and sets.
strip_last_char(<<>>, _) -> <<>>;
strip_last_char(Input, [C0]) ->
case binary:last(Input) of
C0 ->
init_binary(Input);
_Else ->
Input
end;
strip_last_char(Input, [C0,C1]) ->
case binary:last(Input) of
C0 ->
init_binary(Input);
C1 ->
init_binary(Input);
_Else ->
Input
end;
strip_last_char(Input, [C0,C1,C2]) ->
case binary:last(Input) of
C0 ->
init_binary(Input);
C1 ->
init_binary(Input);
C2 ->
init_binary(Input);
_Else ->
Input
end;
strip_last_char(Input, [C0,C1,C2,C3]) ->
case binary:last(Input) of
C0 ->
init_binary(Input);
C1 ->
init_binary(Input);
C2 ->
init_binary(Input);
C3 ->
init_binary(Input);
_Else ->
Input
end.
%% Get parsed binary
get_parsed_binary(Input, Unparsed) ->
{First, _} = split_binary(Input, byte_size(Input) - byte_size_exl_head(Unparsed)),
First.
%% Return all bytes of the binary except the last one. The binary must be non-empty.
init_binary(B) ->
{Init, _} =
split_binary(B, byte_size(B) - 1),
Init.
%% Returns the size of a binary exluding the first element.
%% Used in calls to split_binary().
-spec byte_size_exl_head(binary()) -> number().
byte_size_exl_head(<<>>) -> 0;
byte_size_exl_head(Binary) -> byte_size(Binary) + 1.
%%-------------------------------------------------------------------------
%% [RFC 3986, Chapter 2.1. Percent-Encoding]
%%
%% A percent-encoding mechanism is used to represent a data octet in a
%% component when that octet's corresponding character is outside the
%% allowed set or is being used as a delimiter of, or within, the
%% component. A percent-encoded octet is encoded as a character
%% triplet, consisting of the percent character "%" followed by the two
%% hexadecimal digits representing that octet's numeric value. For
%% example, "%20" is the percent-encoding for the binary octet
%% "00100000" (ABNF: %x20), which in US-ASCII corresponds to the space
%% character (SP). Section 2.4 describes when percent-encoding and
%% decoding is applied.
%%
%% pct-encoded = "%" HEXDIG HEXDIG
%%-------------------------------------------------------------------------
%%-------------------------------------------------------------------------
%% Percent-encode
%%-------------------------------------------------------------------------
%% Only validates as scheme cannot have percent-encoded characters
-spec encode_scheme(list()|binary()) -> list() | binary().
encode_scheme([]) ->
throw({error,invalid_scheme,""});
encode_scheme(<<>>) ->
throw({error,invalid_scheme,<<>>});
encode_scheme(Scheme) ->
case validate_scheme(Scheme) of
true -> Scheme;
false -> throw({error,invalid_scheme,Scheme})
end.
-spec encode_userinfo(list()|binary()) -> list() | binary().
encode_userinfo(Cs) ->
encode(Cs, fun is_userinfo/1).
-spec encode_host(list()|binary()) -> list() | binary().
encode_host(Cs) ->
case classify_host(Cs) of
regname -> Cs;
ipv4 -> Cs;
ipv6 -> bracket_ipv6(Cs);
other -> encode(Cs, fun is_reg_name/1)
end.
-spec encode_path(list()|binary()) -> list() | binary().
encode_path(Cs) ->
encode(Cs, fun is_path/1).
-spec encode_query(list()|binary()) -> list() | binary().
encode_query(Cs) ->
encode(Cs, fun is_query/1).
-spec encode_fragment(list()|binary()) -> list() | binary().
encode_fragment(Cs) ->
encode(Cs, fun is_fragment/1).
%%-------------------------------------------------------------------------
%% Helper funtions for percent-decode
%%-------------------------------------------------------------------------
-spec decode(list()|binary()) -> list() | binary().
decode(Cs) ->
decode(Cs, <<>>).
%%
decode(L, Acc) when is_list(L) ->
B0 = unicode:characters_to_binary(L),
B1 = decode(B0, Acc),
unicode:characters_to_list(B1);
decode(<<$%,C0,C1,Cs/binary>>, Acc) ->
case is_hex_digit(C0) andalso is_hex_digit(C1) of
true ->
B = ?HEX2DEC(C0)*16+?HEX2DEC(C1),
case is_reserved(B) of
true ->
%% [2.2] Characters in the reserved set are protected from
%% normalization.
%% [2.1] For consistency, URI producers and normalizers should
%% use uppercase hexadecimal digits for all percent-
%% encodings.
H0 = hex_to_upper(C0),
H1 = hex_to_upper(C1),
decode(Cs, <<Acc/binary,$%,H0,H1>>);
false ->
decode(Cs, <<Acc/binary, B>>)
end;
false -> throw({error,invalid_percent_encoding,<<$%,C0,C1>>})
end;
decode(<<C,Cs/binary>>, Acc) ->
decode(Cs, <<Acc/binary, C>>);
decode(<<>>, Acc) ->
check_utf8(Acc).
%% Returns Cs if it is utf8 encoded.
check_utf8(Cs) ->
case unicode:characters_to_list(Cs) of
{incomplete,_,_} ->
throw({error,invalid_utf8,Cs});
{error,_,_} ->
throw({error,invalid_utf8,Cs});
_ -> Cs
end.
%% Convert hex digit to uppercase form
hex_to_upper(H) when $a =< H, H =< $f ->
H - 32;
hex_to_upper(H) when $0 =< H, H =< $9;$A =< H, H =< $F->
H;
hex_to_upper(H) ->
throw({error,invalid_input, H}).
%% Check if char is allowed in host
-spec is_host(char()) -> boolean().
is_host($:) -> true;
is_host(Char) -> is_unreserved(Char) orelse is_sub_delim(Char).
%% Check if char is allowed in path
-spec is_path(char()) -> boolean().
is_path($/) -> true;
is_path(Char) -> is_pchar(Char).
%%-------------------------------------------------------------------------
%% Helper functions for percent-encode
%%-------------------------------------------------------------------------
-spec encode(list()|binary(), fun()) -> list() | binary().
encode(Component, Fun) when is_list(Component) ->
B = unicode:characters_to_binary(Component),
unicode:characters_to_list(encode(B, Fun, <<>>));
encode(Component, Fun) when is_binary(Component) ->
encode(Component, Fun, <<>>).
%%
encode(<<Char/utf8, Rest/binary>>, Fun, Acc) ->
C = encode_codepoint_binary(Char, Fun),
encode(Rest, Fun, <<Acc/binary,C/binary>>);
encode(<<Char, Rest/binary>>, _Fun, _Acc) ->
throw({error,invalid_input,<<Char,Rest/binary>>});
encode(<<>>, _Fun, Acc) ->
Acc.
-spec encode_codepoint_binary(integer(), fun()) -> binary().
encode_codepoint_binary(C, Fun) ->
case Fun(C) of
false -> percent_encode_binary(C);
true -> <<C>>
end.
-spec percent_encode_binary(integer()) -> binary().
percent_encode_binary(Code) ->
percent_encode_binary(<<Code/utf8>>, <<>>).
percent_encode_binary(<<A:4,B:4,Rest/binary>>, Acc) ->
percent_encode_binary(Rest, <<Acc/binary,$%,(?DEC2HEX(A)),(?DEC2HEX(B))>>);
percent_encode_binary(<<>>, Acc) ->
Acc.
%%-------------------------------------------------------------------------
%%-------------------------------------------------------------------------
validate_scheme([]) -> true;
validate_scheme([H|T]) ->
case is_scheme(H) of
true -> validate_scheme(T);
false -> false
end;
validate_scheme(<<>>) -> true;
validate_scheme(<<H, Rest/binary>>) ->
case is_scheme(H) of
true -> validate_scheme(Rest);
false -> false
end.
%%-------------------------------------------------------------------------
%% Classifies hostname into the following categories:
%% regname, ipv4 - address does not contain reserved characters to be
%% percent-encoded
%% ipv6 - address does not contain reserved characters but it shall be
%% encolsed in brackets
%% other - address shall be percent-encoded
%%-------------------------------------------------------------------------
classify_host([]) -> other;
classify_host(Addr) when is_binary(Addr) ->
A = unicode:characters_to_list(Addr),
classify_host_ipv6(A);
classify_host(Addr) ->
classify_host_ipv6(Addr).
classify_host_ipv6(Addr) ->
case is_ipv6_address(Addr) of
true -> ipv6;
false -> classify_host_ipv4(Addr)
end.
classify_host_ipv4(Addr) ->
case is_ipv4_address(Addr) of
true -> ipv4;
false -> classify_host_regname(Addr)
end.
classify_host_regname([]) -> regname;
classify_host_regname([H|T]) ->
case is_reg_name(H) of
true -> classify_host_regname(T);
false -> other
end.
is_ipv4_address(Addr) ->
case inet:parse_ipv4strict_address(Addr) of
{ok, _} -> true;
{error, _} -> false
end.
is_ipv6_address(Addr) ->
case inet:parse_ipv6strict_address(Addr) of
{ok, _} -> true;
{error, _} -> false
end.
bracket_ipv6(Addr) when is_binary(Addr) ->
concat(<<$[,Addr/binary>>,<<$]>>);
bracket_ipv6(Addr) when is_list(Addr) ->
[$[|Addr] ++ "]".
%%-------------------------------------------------------------------------
%% Helper funtions for recompose
%%-------------------------------------------------------------------------
%%-------------------------------------------------------------------------
%% Checks if input Map has valid combination of fields that can be
%% recomposed into a URI.
%%
%% The implementation is based on a decision tree that fulfills the
%% following rules:
%% - 'path' shall always be present in the input map
%% URI = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
%% hier-part = "//" authority path-abempty
%% / path-absolute
%% / path-rootless
%% / path-empty
%% - 'host' shall be present in the input map when 'path' starts with
%% two slashes ("//")
%% path = path-abempty ; begins with "/" or is empty
%% / path-absolute ; begins with "/" but not "//"
%% / path-noscheme ; begins with a non-colon segment
%% / path-rootless ; begins with a segment
%% / path-empty ; zero characters
%% path-abempty = *( "/" segment )
%% segment = *pchar
%% - 'host' shall be present if userinfo or port is present in input map
%% authority = [ userinfo "@" ] host [ ":" port ]
%% - All fields shall be valid (scheme, userinfo, host, port, path, query
%% or fragment).
%%-------------------------------------------------------------------------
is_valid_map(#{path := Path} = Map) ->
((starts_with_two_slash(Path) andalso is_valid_map_host(Map))
orelse
(maps:is_key(userinfo, Map) andalso is_valid_map_host(Map))
orelse
(maps:is_key(port, Map) andalso is_valid_map_host(Map))
orelse
all_fields_valid(Map));
is_valid_map(#{}) ->
false.
is_valid_map_host(Map) ->
maps:is_key(host, Map) andalso all_fields_valid(Map).
all_fields_valid(Map) ->
Fun = fun(scheme, _, Acc) -> Acc;
(userinfo, _, Acc) -> Acc;
(host, _, Acc) -> Acc;
(port, _, Acc) -> Acc;
(path, _, Acc) -> Acc;
(query, _, Acc) -> Acc;
(fragment, _, Acc) -> Acc;
(_, _, _) -> false
end,
maps:fold(Fun, true, Map).
starts_with_two_slash([$/,$/|_]) ->
true;
starts_with_two_slash(?STRING_REST("//", _)) ->
true;
starts_with_two_slash(_) -> false.
update_scheme(#{scheme := Scheme}, _) ->
add_colon_postfix(encode_scheme(Scheme));
update_scheme(#{}, _) ->
empty.
update_userinfo(#{userinfo := Userinfo}, empty) ->
add_auth_prefix(encode_userinfo(Userinfo));
update_userinfo(#{userinfo := Userinfo}, URI) ->
concat(URI,add_auth_prefix(encode_userinfo(Userinfo)));
update_userinfo(#{}, empty) ->
empty;
update_userinfo(#{}, URI) ->
URI.
update_host(#{host := Host}, empty) ->
add_auth_prefix(encode_host(Host));
update_host(#{host := Host} = Map, URI) ->
concat(URI,add_host_prefix(Map, encode_host(Host)));
update_host(#{}, empty) ->
empty;
update_host(#{}, URI) ->
URI.
%% URI cannot be empty for ports. E.g. ":8080" is not a valid URI
update_port(#{port := undefined}, URI) ->
concat(URI, <<":">>);
update_port(#{port := Port}, URI) ->
concat(URI,add_colon(encode_port(Port)));
update_port(#{}, URI) ->
URI.
update_path(#{path := Path}, empty) ->
encode_path(Path);
update_path(#{path := Path}, URI) ->
concat(URI,encode_path(Path));
update_path(#{}, empty) ->
empty;
update_path(#{}, URI) ->
URI.
update_query(#{query := Query}, empty) ->
encode_query(Query);
update_query(#{query := Query}, URI) ->
concat(URI,add_question_mark(encode_query(Query)));
update_query(#{}, empty) ->
empty;
update_query(#{}, URI) ->
URI.
update_fragment(#{fragment := Fragment}, empty) ->
add_hashmark(encode_fragment(Fragment));
update_fragment(#{fragment := Fragment}, URI) ->
concat(URI,add_hashmark(encode_fragment(Fragment)));
update_fragment(#{}, empty) ->
"";
update_fragment(#{}, URI) ->
URI.
%%-------------------------------------------------------------------------
%% Concatenates its arguments that can be lists and binaries.
%% The result is a list if at least one of its argument is a list and
%% binary otherwise.
%%-------------------------------------------------------------------------
concat(A, B) when is_binary(A), is_binary(B) ->
<<A/binary, B/binary>>;
concat(A, B) when is_binary(A), is_list(B) ->
unicode:characters_to_list(A) ++ B;
concat(A, B) when is_list(A) ->
A ++ maybe_to_list(B).
add_hashmark(Comp) when is_binary(Comp) ->
<<$#, Comp/binary>>;
add_hashmark(Comp) when is_list(Comp) ->
[$#|Comp].
add_question_mark(Comp) when is_binary(Comp) ->
<<$?, Comp/binary>>;
add_question_mark(Comp) when is_list(Comp) ->
[$?|Comp].
add_colon(Comp) when is_binary(Comp) ->
<<$:, Comp/binary>>.
add_colon_postfix(Comp) when is_binary(Comp) ->
<<Comp/binary,$:>>;
add_colon_postfix(Comp) when is_list(Comp) ->
Comp ++ ":".
add_auth_prefix(Comp) when is_binary(Comp) ->
<<"//", Comp/binary>>;
add_auth_prefix(Comp) when is_list(Comp) ->
[$/,$/|Comp].
add_host_prefix(#{userinfo := _}, Host) when is_binary(Host) ->
<<$@,Host/binary>>;
add_host_prefix(#{}, Host) when is_binary(Host) ->
<<"//",Host/binary>>;
add_host_prefix(#{userinfo := _}, Host) when is_list(Host) ->
[$@|Host];
add_host_prefix(#{}, Host) when is_list(Host) ->
[$/,$/|Host].
maybe_to_list(Comp) when is_binary(Comp) -> unicode:characters_to_list(Comp);
maybe_to_list(Comp) -> Comp.
encode_port(Port) ->
integer_to_binary(Port).
%%-------------------------------------------------------------------------
%% Helper functions for transcode
%%-------------------------------------------------------------------------
%%-------------------------------------------------------------------------
%% uri_string:transcode(<<"x%00%00%00%F6"/utf32>>).
%% 1. Convert (transcode/2) input to list form (list of unicode codepoints)
%% "x%00%00%00%F6"
%% 2. Accumulate characters until percent-encoded segment (transcode/4).
%% Acc = "x"
%% 3. Convert percent-encoded triplets to binary form (transcode_pct/4)
%% <<0,0,0,246>>
%% 4. Transcode in-encoded binary to out-encoding (utf32 -> utf8):
%% <<195,182>>
%% 5. Percent-encode out-encoded binary:
%% <<"%C3%B6"/utf8>> = <<37,67,51,37,66,54>>
%% 6. Convert binary to list form, reverse it and append the accumulator
%% "6B%3C%" + "x"
%% 7. Reverse Acc and return it
%%-------------------------------------------------------------------------
transcode([$%,_C0,_C1|_Rest] = L, Acc, InEnc, OutEnc) ->
transcode_pct(L, Acc, <<>>, InEnc, OutEnc);
transcode([_C|_Rest] = L, Acc, InEnc, OutEnc) ->
transcode(L, Acc, [], InEnc, OutEnc).
%%
transcode([$%,_C0,_C1|_Rest] = L, Acc, List, InEncoding, OutEncoding) ->
transcode_pct(L, List ++ Acc, <<>>, InEncoding, OutEncoding);
transcode([C|Rest], Acc, List, InEncoding, OutEncoding) ->
transcode(Rest, Acc, [C|List], InEncoding, OutEncoding);
transcode([], Acc, List, _InEncoding, _OutEncoding) ->
lists:reverse(List ++ Acc).
%% Transcode percent-encoded segment
transcode_pct([$%,C0,C1|Rest] = L, Acc, B, InEncoding, OutEncoding) ->
case is_hex_digit(C0) andalso is_hex_digit(C1) of
true ->
Int = ?HEX2DEC(C0)*16+?HEX2DEC(C1),
transcode_pct(Rest, Acc, <<B/binary, Int>>, InEncoding, OutEncoding);
false -> throw({error, invalid_percent_encoding,L})
end;
transcode_pct([_C|_Rest] = L, Acc, B, InEncoding, OutEncoding) ->
OutBinary = convert_to_binary(B, InEncoding, OutEncoding),
PctEncUtf8 = percent_encode_segment(OutBinary),
Out = lists:reverse(convert_to_list(PctEncUtf8, utf8)),
transcode(L, Out ++ Acc, [], InEncoding, OutEncoding);
transcode_pct([], Acc, B, InEncoding, OutEncoding) ->
OutBinary = convert_to_binary(B, InEncoding, OutEncoding),
PctEncUtf8 = percent_encode_segment(OutBinary),
Out = convert_to_list(PctEncUtf8, utf8),
lists:reverse(Acc) ++ Out.
%% Convert to binary
convert_to_binary(Binary, InEncoding, OutEncoding) ->
case unicode:characters_to_binary(Binary, InEncoding, OutEncoding) of
{error, _List, RestData} ->
throw({error, invalid_input, RestData});
{incomplete, _List, RestData} ->
throw({error, invalid_input, RestData});
Result ->
Result
end.
%% Convert to list
convert_to_list(Binary, InEncoding) ->
case unicode:characters_to_list(Binary, InEncoding) of
{error, _List, RestData} ->
throw({error, invalid_input, RestData});
{incomplete, _List, RestData} ->
throw({error, invalid_input, RestData});
Result ->
Result
end.
%% Flatten input list
flatten_list([], _) ->
[];
flatten_list(L, InEnc) ->
flatten_list(L, InEnc, []).
%%
flatten_list([H|T], InEnc, Acc) when is_binary(H) ->
L = convert_to_list(H, InEnc),
flatten_list(T, InEnc, lists:reverse(L) ++ Acc);
flatten_list([H|T], InEnc, Acc) when is_list(H) ->
flatten_list(H ++ T, InEnc, Acc);
flatten_list([H|T], InEnc, Acc) ->
flatten_list(T, InEnc, [H|Acc]);
flatten_list([], _InEnc, Acc) ->
lists:reverse(Acc);
flatten_list(Arg, _, _) ->
throw({error, invalid_input, Arg}).
percent_encode_segment(Segment) ->
percent_encode_binary(Segment, <<>>).
%%-------------------------------------------------------------------------
%% Helper functions for compose_query
%%-------------------------------------------------------------------------
%% Returns separator to be used between key-value pairs
get_separator(L) when length(L) =:= 0 ->
<<>>;
get_separator(_L) ->
<<"&">>.
%% HTML 5.2 - 4.10.21.6 URL-encoded form data - WHATWG URL (10 Jan 2018) - UTF-8
%% HTML 5.0 - 4.10.22.6 URL-encoded form data - encoding (non UTF-8)
form_urlencode(Cs, [{encoding, latin1}]) when is_list(Cs) ->
B = convert_to_binary(Cs, utf8, utf8),
html5_byte_encode(base10_encode(B));
form_urlencode(Cs, [{encoding, latin1}]) when is_binary(Cs) ->
html5_byte_encode(base10_encode(Cs));
form_urlencode(Cs, [{encoding, Encoding}])
when is_list(Cs), Encoding =:= utf8; Encoding =:= unicode ->
B = convert_to_binary(Cs, utf8, Encoding),
html5_byte_encode(B);
form_urlencode(Cs, [{encoding, Encoding}])
when is_binary(Cs), Encoding =:= utf8; Encoding =:= unicode ->
html5_byte_encode(Cs);
form_urlencode(Cs, [{encoding, Encoding}]) when is_list(Cs); is_binary(Cs) ->
throw({error,invalid_encoding, Encoding});
form_urlencode(Cs, _) ->
throw({error,invalid_input, Cs}).
%% For each character in the entry's name and value that cannot be expressed using
%% the selected character encoding, replace the character by a string consisting of
%% a U+0026 AMPERSAND character (&), a "#" (U+0023) character, one or more ASCII
%% digits representing the Unicode code point of the character in base ten, and
%% finally a ";" (U+003B) character.
base10_encode(Cs) ->
base10_encode(Cs, <<>>).
%%
base10_encode(<<>>, Acc) ->
Acc;
base10_encode(<<H/utf8,T/binary>>, Acc) when H > 255 ->
Base10 = convert_to_binary(integer_to_list(H,10), utf8, utf8),
base10_encode(T, <<Acc/binary,"&#",Base10/binary,$;>>);
base10_encode(<<H/utf8,T/binary>>, Acc) ->
base10_encode(T, <<Acc/binary,H>>).
html5_byte_encode(B) ->
html5_byte_encode(B, <<>>).
%%
html5_byte_encode(<<>>, Acc) ->
Acc;
html5_byte_encode(<<$ ,T/binary>>, Acc) ->
html5_byte_encode(T, <<Acc/binary,$+>>);
html5_byte_encode(<<H,T/binary>>, Acc) ->
case is_url_char(H) of
true ->
html5_byte_encode(T, <<Acc/binary,H>>);
false ->
<<A:4,B:4>> = <<H>>,
html5_byte_encode(T, <<Acc/binary,$%,(?DEC2HEX(A)),(?DEC2HEX(B))>>)
end;
html5_byte_encode(H, _Acc) ->
throw({error,invalid_input, H}).
%% Return true if input char can appear in form-urlencoded string
%% Allowed chararacters:
%% 0x2A, 0x2D, 0x2E, 0x30 to 0x39, 0x41 to 0x5A,
%% 0x5F, 0x61 to 0x7A
is_url_char(C)
when C =:= 16#2A; C =:= 16#2D;
C =:= 16#2E; C =:= 16#5F;
16#30 =< C, C =< 16#39;
16#41 =< C, C =< 16#5A;
16#61 =< C, C =< 16#7A -> true;
is_url_char(_) -> false.
%%-------------------------------------------------------------------------
%% Helper functions for dissect_query
%%-------------------------------------------------------------------------
dissect_query_key(<<$=,T/binary>>, IsList, Acc, Key, Value) ->
dissect_query_value(T, IsList, Acc, Key, Value);
dissect_query_key(<<"&#",T/binary>>, IsList, Acc, Key, Value) ->
dissect_query_key(T, IsList, Acc, <<Key/binary,"&#">>, Value);
dissect_query_key(T = <<$&,_/binary>>, IsList, Acc, Key, <<>>) ->
dissect_query_value(T, IsList, Acc, Key, true);
dissect_query_key(<<H,T/binary>>, IsList, Acc, Key, Value) ->
dissect_query_key(T, IsList, Acc, <<Key/binary,H>>, Value);
dissect_query_key(T = <<>>, IsList, Acc, Key, <<>>) ->
dissect_query_value(T, IsList, Acc, Key, true).
dissect_query_value(<<$&,T/binary>>, IsList, Acc, Key, Value) ->
K = form_urldecode(IsList, Key),
V = form_urldecode(IsList, Value),
dissect_query_key(T, IsList, [{K,V}|Acc], <<>>, <<>>);
dissect_query_value(<<H,T/binary>>, IsList, Acc, Key, Value) ->
dissect_query_value(T, IsList, Acc, Key, <<Value/binary,H>>);
dissect_query_value(<<>>, IsList, Acc, Key, Value) ->
K = form_urldecode(IsList, Key),
V = form_urldecode(IsList, Value),
lists:reverse([{K,V}|Acc]).
%% HTML 5.2 - 4.10.21.6 URL-encoded form data - WHATWG URL (10 Jan 2018) - UTF-8
%% HTML 5.0 - 4.10.22.6 URL-encoded form data - decoding (non UTF-8)
form_urldecode(_, true) ->
true;
form_urldecode(true, B) ->
Result = base10_decode(form_urldecode(B, <<>>)),
convert_to_list(Result, utf8);
form_urldecode(false, B) ->
base10_decode(form_urldecode(B, <<>>));
form_urldecode(<<>>, Acc) ->
Acc;
form_urldecode(<<$+,T/binary>>, Acc) ->
form_urldecode(T, <<Acc/binary,$ >>);
form_urldecode(<<$%,C0,C1,T/binary>>, Acc) ->
case is_hex_digit(C0) andalso is_hex_digit(C1) of
true ->
V = ?HEX2DEC(C0)*16+?HEX2DEC(C1),
form_urldecode(T, <<Acc/binary, V>>);
false ->
L = convert_to_list(<<$%,C0,C1,T/binary>>, utf8),
throw({error, invalid_percent_encoding, L})
end;
form_urldecode(<<H/utf8,T/binary>>, Acc) ->
form_urldecode(T, <<Acc/binary,H/utf8>>);
form_urldecode(<<H,_/binary>>, _Acc) ->
throw({error, invalid_character, [H]}).
base10_decode(Cs) ->
base10_decode(Cs, <<>>).
%
base10_decode(<<>>, Acc) ->
Acc;
base10_decode(<<"&#",T/binary>>, Acc) ->
base10_decode_unicode(T, Acc);
base10_decode(<<H/utf8,T/binary>>, Acc) ->
base10_decode(T,<<Acc/binary,H/utf8>>);
base10_decode(<<H,_/binary>>, _) ->
throw({error, invalid_input, [H]}).
base10_decode_unicode(B, Acc) ->
base10_decode_unicode(B, 0, Acc).
%%
base10_decode_unicode(<<H/utf8,T/binary>>, Codepoint, Acc) when $0 =< H, H =< $9 ->
Res = Codepoint * 10 + (H - $0),
base10_decode_unicode(T, Res, Acc);
base10_decode_unicode(<<$;,T/binary>>, Codepoint, Acc) ->
base10_decode(T, <<Acc/binary,Codepoint/utf8>>);
base10_decode_unicode(<<H,_/binary>>, _, _) ->
throw({error, invalid_input, [H]}).
%%-------------------------------------------------------------------------
%% Helper functions for normalize
%%-------------------------------------------------------------------------
normalize_map(URIMap) ->
normalize_path_segment(
normalize_scheme_based(
normalize_percent_encoding(
normalize_case(URIMap)))).
%% 6.2.2.1. Case Normalization
normalize_case(#{scheme := Scheme, host := Host} = Map) ->
Map#{scheme => to_lower(Scheme),
host => to_lower(Host)};
normalize_case(#{host := Host} = Map) ->
Map#{host => to_lower(Host)};
normalize_case(#{scheme := Scheme} = Map) ->
Map#{scheme => to_lower(Scheme)};
normalize_case(#{} = Map) ->
Map.
%% 6.2.2.2. Percent-Encoding Normalization
normalize_percent_encoding(Map) ->
Fun = fun (K,V) when K =:= userinfo; K =:= host; K =:= path;
K =:= query; K =:= fragment ->
decode(V);
%% Handle port and scheme
(_,V) ->
V
end,
maps:map(Fun, Map).
to_lower(Cs) when is_list(Cs) ->
B = convert_to_binary(Cs, utf8, utf8),
convert_to_list(to_lower(B), utf8);
to_lower(Cs) when is_binary(Cs) ->
to_lower(Cs, <<>>).
%%
to_lower(<<C,Cs/binary>>, Acc) when $A =< C, C =< $Z ->
to_lower(Cs, <<Acc/binary,(C + 32)>>);
to_lower(<<C,Cs/binary>>, Acc) ->
to_lower(Cs, <<Acc/binary,C>>);
to_lower(<<>>, Acc) ->
Acc.
%% 6.2.2.3. Path Segment Normalization
%% 5.2.4. Remove Dot Segments
normalize_path_segment(Map) ->
Path = maps:get(path, Map, undefined),
Map#{path => remove_dot_segments(Path)}.
remove_dot_segments(Path) when is_binary(Path) ->
remove_dot_segments(Path, <<>>);
remove_dot_segments(Path) when is_list(Path) ->
B = convert_to_binary(Path, utf8, utf8),
B1 = remove_dot_segments(B, <<>>),
convert_to_list(B1, utf8).
%%
remove_dot_segments(<<>>, Output) ->
Output;
remove_dot_segments(<<"../",T/binary>>, Output) ->
remove_dot_segments(T, Output);
remove_dot_segments(<<"./",T/binary>>, Output) ->
remove_dot_segments(T, Output);
remove_dot_segments(<<"/./",T/binary>>, Output) ->
remove_dot_segments(<<$/,T/binary>>, Output);
remove_dot_segments(<<"/.">>, Output) ->
remove_dot_segments(<<$/>>, Output);
remove_dot_segments(<<"/../",T/binary>>, Output) ->
Out1 = remove_last_segment(Output),
remove_dot_segments(<<$/,T/binary>>, Out1);
remove_dot_segments(<<"/..">>, Output) ->
Out1 = remove_last_segment(Output),
remove_dot_segments(<<$/>>, Out1);
remove_dot_segments(<<$.>>, Output) ->
remove_dot_segments(<<>>, Output);
remove_dot_segments(<<"..">>, Output) ->
remove_dot_segments(<<>>, Output);
remove_dot_segments(Input, Output) ->
{First, Rest} = first_path_segment(Input),
remove_dot_segments(Rest, <<Output/binary,First/binary>>).
first_path_segment(Input) ->
F = first_path_segment(Input, <<>>),
split_binary(Input, byte_size(F)).
%%
first_path_segment(<<$/,T/binary>>, Acc) ->
first_path_segment_end(<<T/binary>>, <<Acc/binary,$/>>);
first_path_segment(<<C,T/binary>>, Acc) ->
first_path_segment_end(<<T/binary>>, <<Acc/binary,C>>).
first_path_segment_end(<<>>, Acc) ->
Acc;
first_path_segment_end(<<$/,_/binary>>, Acc) ->
Acc;
first_path_segment_end(<<C,T/binary>>, Acc) ->
first_path_segment_end(<<T/binary>>, <<Acc/binary,C>>).
remove_last_segment(<<>>) ->
<<>>;
remove_last_segment(B) ->
{Init, Last} = split_binary(B, byte_size(B) - 1),
case Last of
<<$/>> ->
Init;
_Char ->
remove_last_segment(Init)
end.
%% RFC 3986, 6.2.3. Scheme-Based Normalization
normalize_scheme_based(Map) ->
Scheme = maps:get(scheme, Map, undefined),
Port = maps:get(port, Map, undefined),
Path= maps:get(path, Map, undefined),
normalize_scheme_based(Map, Scheme, Port, Path).
%%
normalize_scheme_based(Map, Scheme, Port, Path)
when Scheme =:= "http"; Scheme =:= <<"http">> ->
normalize_http(Map, Port, Path);
normalize_scheme_based(Map, Scheme, Port, Path)
when Scheme =:= "https"; Scheme =:= <<"https">> ->
normalize_https(Map, Port, Path);
normalize_scheme_based(Map, Scheme, Port, _Path)
when Scheme =:= "ftp"; Scheme =:= <<"ftp">> ->
normalize_ftp(Map, Port);
normalize_scheme_based(Map, Scheme, Port, _Path)
when Scheme =:= "ssh"; Scheme =:= <<"ssh">> ->
normalize_ssh_sftp(Map, Port);
normalize_scheme_based(Map, Scheme, Port, _Path)
when Scheme =:= "sftp"; Scheme =:= <<"sftp">> ->
normalize_ssh_sftp(Map, Port);
normalize_scheme_based(Map, Scheme, Port, _Path)
when Scheme =:= "tftp"; Scheme =:= <<"tftp">> ->
normalize_tftp(Map, Port);
normalize_scheme_based(Map, _, _, _) ->
Map.
normalize_http(Map, Port, Path) ->
M1 = normalize_port(Map, Port, 80),
normalize_http_path(M1, Path).
normalize_https(Map, Port, Path) ->
M1 = normalize_port(Map, Port, 443),
normalize_http_path(M1, Path).
normalize_ftp(Map, Port) ->
normalize_port(Map, Port, 21).
normalize_ssh_sftp(Map, Port) ->
normalize_port(Map, Port, 22).
normalize_tftp(Map, Port) ->
normalize_port(Map, Port, 69).
normalize_port(Map, Port, Default) ->
case Port of
Default ->
maps:remove(port, Map);
_Else ->
Map
end.
normalize_http_path(Map, Path) ->
case Path of
"" ->
Map#{path => "/"};
<<>> ->
Map#{path => <<"/">>};
_Else ->
Map
end.
