The R13B03 release.OTP_R13B03

1 files changed, 610 insertions, 0 deletions

diff --git a/erts/etc/unix/to_erl.c b/erts/etc/unix/to_erl.c
new file mode 100644
index 0000000000..588d127445
--- /dev/null
+++ b/erts/etc/unix/to_erl.c
@@ -0,0 +1,610 @@
+/*
+ * %CopyrightBegin%
+ * 
+ * Copyright Ericsson AB 1996-2009. All Rights Reserved.
+ * 
+ * The contents of this file are subject to the Erlang Public License,
+ * Version 1.1, (the "License"); you may not use this file except in
+ * compliance with the License. You should have received a copy of the
+ * Erlang Public License along with this software. If not, it can be
+ * retrieved online at http://www.erlang.org/.
+ * 
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and limitations
+ * under the License.
+ * 
+ * %CopyrightEnd%
+ */
+/* 
+ * Module: to_erl.c
+ * 
+ * This module implements a process that opens two specified FIFOs, one
+ * for reading and one for writing; reads from its stdin, and writes what
+ * it has read to the write FIF0; reads from the read FIFO, and writes to
+ * its stdout.
+ *
+  ________                            _________ 
+ |        |--<-- pipe.r (fifo1) --<--|         |
+ | to_erl |                          | run_erl | (parent)
+ |________|-->-- pipe.w (fifo2) -->--|_________|
+                                          ^ master pty
+                                          |
+                                          | slave pty
+                                      ____V____ 
+                                     |         |
+                                     |  "erl"  | (child)
+                                     |_________|
+ */
+#ifdef HAVE_CONFIG_H
+#  include "config.h"
+#endif
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <termios.h>
+#include <dirent.h>
+#include <signal.h>
+#include <errno.h>
+#ifdef HAVE_SYS_IOCTL_H
+#  include <sys/ioctl.h>
+#endif
+
+#include "run_erl.h"
+#include "safe_string.h"   /* strn_cpy, strn_catf, sn_printf, etc. */
+
+#if defined(O_NONBLOCK)
+# define DONT_BLOCK_PLEASE O_NONBLOCK
+#else
+# define DONT_BLOCK_PLEASE O_NDELAY
+# if !defined(EAGAIN)
+#  define EAGAIN -3898734
+# endif
+#endif
+
+#ifdef HAVE_STRERROR
+#  define STRERROR(x) strerror(x)
+#else
+#  define STRERROR(x) ""
+#endif
+
+#define noDEBUG
+
+#define PIPE_DIR        "/tmp/"
+#define PIPE_STUBNAME   "erlang.pipe"
+#define PIPE_STUBLEN    strlen(PIPE_STUBNAME)
+
+#ifdef DEBUG
+#define STATUS(s)  { fprintf(stderr, (s)); fflush(stderr); }
+#else
+#define STATUS(s)
+#endif
+
+#ifndef FILENAME_MAX
+#define FILENAME_MAX 250
+#endif
+
+static struct termios tty_smode, tty_rmode;
+static int tty_eof = 0;
+static int recv_sig = 0;
+static int protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */
+
+static int write_all(int fd, const char* buf, int len);
+static int window_size_seq(char* buf, size_t bufsz);
+static int version_handshake(char* buf, int len, int wfd);
+#ifdef DEBUG
+static void show_terminal_settings(struct termios *);
+#endif
+
+static void handle_ctrlc(int sig)
+{
+    /* Reinstall the handler, and signal break flag */
+    signal(SIGINT,handle_ctrlc);
+    recv_sig = SIGINT;
+}  
+
+static void handle_sigwinch(int sig)
+{
+    recv_sig = SIGWINCH;
+}
+
+static void usage(char *pname)
+{
+    fprintf(stderr, "Usage: %s [-h|-F] [pipe_name|pipe_dir/]\n", pname);
+    fprintf(stderr, "\t-h\tThis help text.\n");
+    fprintf(stderr, "\t-F\tForce connection even though pipe is locked by other to_erl process.\n");
+}
+
+int main(int argc, char **argv)
+{
+    char  FIFO1[FILENAME_MAX], FIFO2[FILENAME_MAX];
+    int i, len, wfd, rfd, result = 0;
+    fd_set readfds;
+    char buf[BUFSIZ];
+    char pipename[FILENAME_MAX];
+    int pipeIx = 1;
+    int force_lock = 0;
+    int got_some = 0;
+
+    if (argc >= 2 && argv[1][0]=='-') {
+	switch (argv[1][1]) {
+	case 'h':
+	    usage(argv[0]);
+	    exit(1);
+	case 'F':
+	    force_lock = 1;
+	    break;
+	default:
+	    fprintf(stderr,"Invalid option '%s'\n",argv[1]);
+	    exit(1);
+	}
+	pipeIx = 2;
+    }
+    
+#ifdef DEBUG
+    fprintf(stderr, "%s: pid is : %d\n", argv[0], (int)getpid());
+#endif
+    
+    strn_cpy(pipename, sizeof(pipename),
+	     (argv[pipeIx] ? argv[pipeIx] : PIPE_DIR));
+    
+    if(*pipename && pipename[strlen(pipename)-1] == '/') {
+	/* The user wishes us to find a pipe name in the specified */
+	/* directory */
+	int highest_pipe_num = 0;
+	DIR *dirp;
+	struct dirent *direntp;
+
+	dirp = opendir(pipename);
+	if(!dirp) {
+	    fprintf(stderr, "Can't access pipe directory %s.\n", pipename);
+	    exit(1);
+	}
+
+	/* Check the directory for existing pipes */
+    
+	while((direntp=readdir(dirp)) != NULL) {
+	    if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) {
+		int num = atoi(direntp->d_name+PIPE_STUBLEN+1);
+		if(num > highest_pipe_num)
+		    highest_pipe_num = num;
+	    }
+	}	
+	closedir(dirp);
+	strn_catf(pipename, sizeof(pipename), (highest_pipe_num?"%s.%d":"%s"),
+		  PIPE_STUBNAME, highest_pipe_num);
+    } /* if */
+
+    /* read FIFO */
+    sn_printf(FIFO1,sizeof(FIFO1),"%s.r",pipename);
+    /* write FIFO */
+    sn_printf(FIFO2,sizeof(FIFO2),"%s.w",pipename);
+
+    /* Check that nobody is running to_erl on this pipe already */
+    if ((wfd = open (FIFO1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) {
+	/* Open as server succeeded -- to_erl is already running! */
+	close(wfd);
+	fprintf(stderr, "Another to_erl process already attached to pipe "
+			"%s.\n", pipename);
+	if (force_lock) {
+	    fprintf(stderr, "But we proceed anyway by force (-F).\n");
+	} 
+	else {
+	    exit(1);
+	}
+    }
+
+    if ((rfd = open (FIFO1, O_RDONLY|DONT_BLOCK_PLEASE, 0)) < 0) {
+#ifdef DEBUG
+	fprintf(stderr, "Could not open FIFO %s for reading.\n", FIFO1);
+#endif
+	fprintf(stderr, "No running Erlang on pipe %s.\n", pipename);
+	exit(1);
+    }
+#ifdef DEBUG
+    fprintf(stderr, "to_erl: %s opened for reading\n", FIFO1);
+#endif
+    
+    if ((wfd = open (FIFO2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) {
+#ifdef DEBUG
+	fprintf(stderr, "Could not open FIFO %s for writing.\n", FIFO2);
+#endif
+	fprintf(stderr, "No running Erlang on pipe %s.\n", pipename);
+	close(rfd);
+	exit(1);
+    }
+#ifdef DEBUG
+    fprintf(stderr, "to_erl: %s opened for writing\n", FIFO2);
+#endif
+    
+    fprintf(stderr, "Attaching to %s (^D to exit)\n\n", pipename);
+    
+    /* Set break handler to our handler */
+    signal(SIGINT,handle_ctrlc);
+
+    /* 
+     * Save the current state of the terminal, and set raw mode.
+     */
+    if (tcgetattr(0, &tty_rmode) , 0) {
+	fprintf(stderr, "Cannot get terminals current mode\n");
+	exit(-1);
+    }
+    tty_smode = tty_rmode;
+    tty_eof = '\004'; /* Ctrl+D to exit */
+#ifdef DEBUG
+    show_terminal_settings(&tty_rmode);
+#endif
+    tty_smode.c_iflag =
+	1*BRKINT |/*Signal interrupt on break.*/
+	    1*IGNPAR |/*Ignore characters with parity errors.*/
+		1*ISTRIP |/*Strip character.*/
+		    0;
+    
+#if 0
+0*IGNBRK |/*Ignore break condition.*/
+0*PARMRK |/*Mark parity errors.*/
+0*INPCK  |/*Enable input parity check.*/
+0*INLCR  |/*Map NL to CR on input.*/
+0*IGNCR  |/*Ignore CR.*/
+0*ICRNL  |/*Map CR to NL on input.*/
+0*IUCLC  |/*Map upper-case to lower-case on input.*/
+0*IXON   |/*Enable start/stop output control.*/
+0*IXANY  |/*Enable any character to restart output.*/
+0*IXOFF  |/*Enable start/stop input control.*/
+0*IMAXBEL|/*Echo BEL on input line too long.*/
+#endif
+						
+    tty_smode.c_oflag =
+	1*OPOST  |/*Post-process output.*/
+	    1*ONLCR  |/*Map NL to CR-NL on output.*/
+#ifdef XTABS
+		1*XTABS  |/*Expand tabs to spaces. (Linux)*/
+#endif
+#ifdef OXTABS
+		    1*OXTABS  |/*Expand tabs to spaces. (FreeBSD)*/
+#endif
+#ifdef NL0
+			1*NL0    |/*Select newline delays*/
+#endif
+#ifdef CR0
+			    1*CR0    |/*Select carriage-return delays*/
+#endif
+#ifdef TAB0
+				1*TAB0   |/*Select horizontal tab delays*/
+#endif
+#ifdef BS0
+				    1*BS0    |/*Select backspace delays*/
+#endif
+#ifdef VT0
+					1*VT0    |/*Select vertical tab delays*/
+#endif
+#ifdef FF0
+					    1*FF0    |/*Select form feed delays*/
+#endif
+											    0;
+    
+#if 0
+0*OLCUC  |/*Map lower case to upper on output.*/
+0*OCRNL  |/*Map CR to NL on output.*/
+0*ONOCR  |/*No CR output at column 0.*/
+0*ONLRET |/*NL performs CR function.*/
+0*OFILL  |/*Use fill characters for delay.*/
+0*OFDEL  |/*Fill is DEL, else NULL.*/
+0*NL1    |
+0*CR1    |
+0*CR2    |
+0*CR3    |
+0*TAB1   |
+0*TAB2   |
+0*TAB3   |/*Expand tabs to spaces.*/
+0*BS1    |
+0*VT1    |
+0*FF1    |
+#endif
+								    
+    /* JALI: removed setting the tty_smode.c_cflag flags, since this is not */
+    /* advisable if this is a *real* terminal, such as the console. In fact */
+    /* this may hang the entire machine, deep, deep down (signalling break */
+    /* or toggling the abort switch doesn't help) */
+    
+    tty_smode.c_lflag =
+									0;
+    
+#if 0
+0*ISIG   |/*Enable signals.*/
+0*ICANON |/*Canonical input (erase and kill processing).*/
+0*XCASE  |/*Canonical upper/lower presentation.*/
+0*ECHO   |/*Enable echo.*/
+0*ECHOE  |/*Echo erase character as BS-SP-BS.*/
+0*ECHOK  |/*Echo NL after kill character.*/
+0*ECHONL |/*Echo NL.*/
+0*NOFLSH |/*Disable flush after interrupt or quit.*/
+0*TOSTOP |/*Send SIGTTOU for background output.*/
+0*ECHOCTL|/*Echo control characters as ^char, delete as ^?.*/
+0*ECHOPRT|/*Echo erase character as character erased.*/
+0*ECHOKE |/*BS-SP-BS erase entire line on line kill.*/
+0*FLUSHO |/*Output is being flushed.*/
+0*PENDIN |/*Retype pending input at next read or input character.*/
+0*IEXTEN |/*Enable extended (implementation-defined) functions.*/
+#endif
+								
+    tty_smode.c_cc[VMIN]      =0;/* Note that VMIN is the same as VEOF! */
+    tty_smode.c_cc[VTIME]     =0;/* Note that VTIME is the same as VEOL! */
+    tty_smode.c_cc[VINTR]     =3;
+    
+    tcsetattr(0, TCSANOW, &tty_smode);
+    
+#ifdef DEBUG
+    show_terminal_settings(&tty_smode);
+#endif
+    /*
+     * 	 "Write a ^R to the FIFO which causes the other end to redisplay
+     *    the input line."
+     * This does not seem to work as was intended in old comment above.
+     * However, this control character is now (R12B-3) used by run_erl
+     * to trigger the version handshaking between to_erl and run_erl
+     * at the start of every new to_erl-session.
+     */
+    write(wfd, "\022", 1);
+
+    /*
+     * read and write
+     */
+    while (1) {
+	FD_ZERO(&readfds);
+	FD_SET(0, &readfds);
+	FD_SET(rfd, &readfds);
+	if (select(rfd + 1, &readfds, NULL, NULL, NULL) < 0) {
+	    if (recv_sig) {
+		FD_ZERO(&readfds);
+	    }
+	    else {
+		fprintf(stderr, "Error in select.\n");
+		result = -1;
+		break;
+	    }
+	}
+	len = 0;
+
+	/*
+	 * Read from terminal and write to FIFO
+         */
+	if (recv_sig) {
+	    switch (recv_sig) {
+	    case SIGINT:
+		fprintf(stderr, "[Break]\n\r");
+		buf[0] = '\003';
+		len = 1;
+		break;
+	    case SIGWINCH:
+		len = window_size_seq(buf,sizeof(buf));
+		break;
+	    default:
+		fprintf(stderr,"Unexpected signal: %u\n",recv_sig);
+	    }
+	    recv_sig = 0;
+	}
+	else if (FD_ISSET(0, &readfds)) {
+	    len = read(0, buf, sizeof(buf));
+	    if (len <= 0) {
+		close(rfd);
+		close(wfd);
+		if (len < 0) {
+		    fprintf(stderr, "Error in reading from stdin.\n");
+		    result = -1;
+		} else {
+		    fprintf(stderr, "[EOF]\n\r");
+		}
+		break;
+	    }
+	    /* check if there is an eof character in input */
+	    for (i = 0; i < len && buf[i] != tty_eof; i++);
+	    if (buf[i] == tty_eof) {
+		fprintf(stderr, "[Quit]\n\r");
+		break;
+	    }
+	}
+
+	if (len) {
+#ifdef DEBUG
+	    write(1, buf, len);
+#endif
+	    if (write_all(wfd, buf, len) != len) {
+		fprintf(stderr, "Error in writing to FIFO.\n");
+		close(rfd);
+		close(wfd);
+		result = -1;
+		break;
+	    }
+	    STATUS("\" OK\r\n");
+	}
+
+	/*
+	 * Read from FIFO, write to terminal.
+	 */
+	if (FD_ISSET(rfd, &readfds)) {
+	    STATUS("FIFO read: ");
+	    len = read(rfd, buf, BUFSIZ);
+	    if (len < 0 && errno == EAGAIN) {
+		/*
+		 * No data this time, but the writing end of the FIFO is still open.
+		 * Do nothing.
+		 */
+		;
+	    } else if (len <= 0) {
+		/*
+		 * Either an error or end of file. In either case, break out
+		 * of the loop.
+		 */
+		close(rfd);
+		close(wfd);
+		if (len < 0) {
+		    fprintf(stderr, "Error in reading from FIFO.\n");
+		    result = -1;
+		} else
+		    fprintf(stderr, "[End]\n\r");
+		break;
+	    } else {
+		if (!got_some) {
+		    if ((len=version_handshake(buf,len,wfd)) < 0) {
+			close(rfd);
+			close(wfd);
+			result = -1;
+			break;
+		    }
+		    if (protocol_ver >= 1) {
+			/* Tell run_erl size of terminal window */
+			signal(SIGWINCH, handle_sigwinch);
+			raise(SIGWINCH);
+		    }
+		    got_some = 1;
+		}
+
+		/*
+		 * We successfully read at least one character. Write what we got.
+		 */
+		STATUS("Terminal write: \"");
+		if (write_all(1, buf, len) != len) {
+		    fprintf(stderr, "Error in writing to terminal.\n");
+		    close(rfd);
+		    close(wfd);
+		    result = -1;
+		    break;
+		}
+		STATUS("\" OK\r\n");
+	    }
+	}
+    }
+
+    /* 
+     * Reset terminal characterstics 
+     * XXX
+     */
+    tcsetattr(0, TCSANOW, &tty_rmode);
+    return 0;
+}
+
+/* Call write() until entire buffer has been written or error.
+ * Return len or -1.
+ */
+static int write_all(int fd, const char* buf, int len)
+{
+    int left = len;
+    int written;
+    while (left) {
+	written = write(fd,buf,left);
+	if (written < 0) {
+	    return -1;
+	}
+	left -= written;
+	buf += written;
+    }
+    return len;
+}
+
+static int window_size_seq(char* buf, size_t bufsz)
+{
+#ifdef TIOCGWINSZ
+    struct winsize ws;
+    static const char prefix[] = "\033_";
+    static const char suffix[] = "\033\\";
+    /* This Esc sequence is called "Application Program Command"
+       and seems suitable to use for our own customized stuff. */
+
+    if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) == 0) {
+	int len = sn_printf(buf, bufsz, "%swinsize=%u,%u%s",
+			    prefix, ws.ws_col, ws.ws_row, suffix);
+	return len;
+    }
+#endif /* TIOCGWINSZ */
+    return 0;
+}
+
+/*   to_erl                     run_erl
+ *     |                           |
+ *     |---------- '\022' -------->| (session start)
+ *     |                           |
+ *     |<---- "[run_erl v1-0]" ----| (version interval)
+ *     |                           |
+ *     |--- Esc_"version=1"Esc\ -->| (common version)
+ *     |                           |
+ */
+static int version_handshake(char* buf, int len, int wfd)
+{
+    unsigned re_high=0, re_low;
+    char *end = find_str(buf,len,"]\n");
+    
+    if (end && sscanf(buf,"[run_erl v%u-%u",&re_high,&re_low)==2) {
+	char wbuf[30];
+	int wlen;
+
+	if (re_low > RUN_ERL_HI_VER || re_high < RUN_ERL_LO_VER) {
+	    fprintf(stderr,"Incompatible versions: to_erl=v%u-%u run_erl=v%u-%u\n",
+		    RUN_ERL_HI_VER, RUN_ERL_LO_VER, re_high, re_low);
+	    return -1;
+	}
+	/* Choose highest common version */
+	protocol_ver = re_high < RUN_ERL_HI_VER ? re_high : RUN_ERL_HI_VER;
+
+	wlen = sn_printf(wbuf, sizeof(wbuf), "\033_version=%u\033\\",
+			 protocol_ver);
+	if (write_all(wfd, wbuf, wlen) < 0) {
+	    fprintf(stderr,"Failed to send version handshake\n");
+	    return -1;
+	}
+	end += 2;
+	len -= (end-buf);
+	memmove(buf,end,len);
+
+    }
+    else {  /* we assume old run_erl without version handshake */
+	protocol_ver = 0;
+    }
+
+    if (re_high != RUN_ERL_HI_VER) {
+	fprintf(stderr,"run_erl has different version, "
+		"using common protocol level %u\n", protocol_ver);
+    }
+
+    return len;
+}
+
+
+#ifdef DEBUG
+#define S(x)  ((x) > 0 ? 1 : 0)
+
+static void show_terminal_settings(struct termios *t)
+{
+  fprintf(stderr,"c_iflag:\n");
+  fprintf(stderr,"Signal interrupt on break:   BRKINT  %d\n", S(t->c_iflag & BRKINT));
+  fprintf(stderr,"Map CR to NL on input:       ICRNL   %d\n", S(t->c_iflag & ICRNL));
+  fprintf(stderr,"Ignore break condition:      IGNBRK  %d\n", S(t->c_iflag & IGNBRK));
+  fprintf(stderr,"Ignore CR:                   IGNCR   %d\n", S(t->c_iflag & IGNCR));
+  fprintf(stderr,"Ignore char with par. err's: IGNPAR  %d\n", S(t->c_iflag & IGNPAR));
+  fprintf(stderr,"Map NL to CR on input:       INLCR   %d\n", S(t->c_iflag & INLCR));
+  fprintf(stderr,"Enable input parity check:   INPCK   %d\n", S(t->c_iflag & INPCK));
+  fprintf(stderr,"Strip character              ISTRIP  %d\n", S(t->c_iflag & ISTRIP));
+  fprintf(stderr,"Enable start/stop input ctrl IXOFF   %d\n", S(t->c_iflag & IXOFF));
+  fprintf(stderr,"ditto output ctrl            IXON    %d\n", S(t->c_iflag & IXON));
+  fprintf(stderr,"Mark parity errors           PARMRK  %d\n", S(t->c_iflag & PARMRK));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_oflag:\n");
+  fprintf(stderr,"Perform output processing    OPOST   %d\n", S(t->c_oflag & OPOST));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_cflag:\n");
+  fprintf(stderr,"Ignore modem status lines    CLOCAL  %d\n", S(t->c_cflag & CLOCAL));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_local:\n");
+  fprintf(stderr,"Enable echo                  ECHO    %d\n", S(t->c_lflag & ECHO));
+  fprintf(stderr,"\n");
+  fprintf(stderr,"c_cc:\n");
+  fprintf(stderr,"c_cc[VEOF]                           %d\n", t->c_cc[VEOF]);
+}
+#endif