aboutsummaryrefslogtreecommitdiffstats
path: root/lib/runtime_tools/doc/src/msacc.xml
diff options
context:
space:
mode:
authorLukas Larsson <[email protected]>2014-09-12 16:38:00 +0200
committerLukas Larsson <[email protected]>2016-02-02 10:45:21 +0100
commit664ed2a6fd2b324bb6b56db3d3eca853cfda8f61 (patch)
tree286743a4b1f794948329961e7f5879b5f54f54a5 /lib/runtime_tools/doc/src/msacc.xml
parenteea5f896780e07f7ca76685061d01e7be5a7abaa (diff)
downloadotp-664ed2a6fd2b324bb6b56db3d3eca853cfda8f61.tar.gz
otp-664ed2a6fd2b324bb6b56db3d3eca853cfda8f61.tar.bz2
otp-664ed2a6fd2b324bb6b56db3d3eca853cfda8f61.zip
erts: Add microstate accounting
Microstate accounting is a way to track which state the different threads within ERTS are in. The main usage area is to pin point performance bottlenecks by checking which states the threads are in and then from there figuring out why and where to optimize. Since checking whether microstate accounting is on or off is relatively expensive if done in a short loop only a few of the states are enabled by default and more states can be enabled through configure. I've done some benchmarking and the overhead with it turned off is not noticible and with it on it is a fraction of a percent. If you enable the extra states, depending on the benchmark, the ovehead when turned off is about 1% and when turned on somewhere inbetween 5-15%. OTP-12345
Diffstat (limited to 'lib/runtime_tools/doc/src/msacc.xml')
-rw-r--r--lib/runtime_tools/doc/src/msacc.xml305
1 files changed, 305 insertions, 0 deletions
diff --git a/lib/runtime_tools/doc/src/msacc.xml b/lib/runtime_tools/doc/src/msacc.xml
new file mode 100644
index 0000000000..129da3d230
--- /dev/null
+++ b/lib/runtime_tools/doc/src/msacc.xml
@@ -0,0 +1,305 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<!DOCTYPE erlref SYSTEM "erlref.dtd">
+
+<erlref>
+ <header>
+ <copyright>
+ <year>2014</year><year>2014</year>
+ <holder>Ericsson AB. All Rights Reserved.</holder>
+ </copyright>
+ <legalnotice>
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ </legalnotice>
+
+ <title>Microstate Accounting</title>
+ <prepared>Lukas Larsson</prepared>
+ <responsible></responsible>
+ <docno>1</docno>
+ <approved></approved>
+ <checked></checked>
+ <date>14-09-30</date>
+ <rev>A</rev>
+ <file>msacc.xml</file>
+ </header>
+ <module>msacc</module>
+ <modulesummary>Convenience functions for microstate accounting</modulesummary>
+ <description>
+ <p>This module implements some convenience functions for analyzing
+ microstate accounting data. For details about how to use the basic api and
+ what the different states represent see
+ <seealso marker="erts:erlang#statistics_microstate_accounting"><c>
+ erlang:statistics(microstate_accounting)</c></seealso>.</p>
+ <marker id="msacc_print_example"></marker>
+ <p><em>Basic Scenario</em></p>
+ <pre>1> <input>msacc:start(1000).</input>
+ok
+2> <input>msacc:print().</input>
+Average thread real-time : 1000513 us
+Accumulated system run-time : 2213 us
+Average scheduler run-time : 1076 us
+
+ Thread aux check_io emulator gc other port sleep
+
+Stats per thread:
+ async( 0) 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 100.00%
+ async( 1) 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 100.00%
+ aux( 1) 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 99.99%
+ scheduler( 1) 0.00% 0.03% 0.13% 0.00% 0.01% 0.00% 99.82%
+ scheduler( 2) 0.00% 0.00% 0.00% 0.00% 0.03% 0.00% 99.97%
+
+Stats per type:
+ async 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 100.00%
+ aux 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 99.99%
+ scheduler 0.00% 0.02% 0.06% 0.00% 0.02% 0.00% 99.89%
+ok
+</pre>
+ <p>This first command enables microstate accounting for 1000 milliseconds.
+ See <seealso marker="#start-0"><c>start/0</c></seealso>,
+ <seealso marker="#stop-0"><c>stop/0</c></seealso>,
+ <seealso marker="#reset-0"><c>reset/0</c></seealso> and
+ <seealso marker="#start-1"><c>start/1</c></seealso> for more details.
+ The second command prints the statistics gathered during that time.
+ First three general statistics are printed.</p>
+ <taglist>
+ <tag>Average real-time</tag>
+ <item>The average time spent collecting data in the threads.
+ This should be close to the time which data was collected.
+ </item>
+ <tag>System run-time</tag>
+ <item>The total run-time of all threads in the system.
+ This is what you get if you call <c>msacc:stats(total_runtime,Stats).</c>
+ </item>
+ <tag>Average scheduler run-time</tag>
+ <item>The average run-time for the schedulers.
+ This is the average amount of time the schedulers did not sleep.</item>
+ </taglist>
+ <p>Then one column per state is printed with a the percentage of time this
+ thread spent in the state out of it's own real-time. After the thread
+ specific time, the accumulated time for each type of thread is printed in
+ a similar format.</p>
+ <p>Since we have the average real-time and the percentage spent in each
+ state we can easily calculate the time spent in each state by multiplying
+ <c>Average thread real-time</c> with <c>Thread state %</c>, i.e. to
+ get the time Scheduler 1 spent in the emulator state we do
+ <c>1000513us * 0.13% = 1300us</c>.</p>
+ </description>
+ <datatypes>
+ <datatype>
+ <name name="msacc_data"/>
+ </datatype>
+ <datatype>
+ <name name="msacc_data_thread"/>
+ </datatype>
+ <datatype>
+ <name name="msacc_data_counters"/>
+ <desc><p>A map containing the different microstate accounting states and
+ the number of microseconds spent in it.</p></desc>
+ </datatype>
+ <datatype>
+ <name name="msacc_stats"/>
+ </datatype>
+ <datatype>
+ <name name="msacc_stats_thread"/>
+ <desc><p>A map containing information about a specific thread. The
+ percentages in the map can be either run-time or real-time depending
+ on if <c>runtime</c> or <c>realtime</c> was requested from
+ <seealso marker="#stats-2">stats/2</seealso>. <c>system</c> is the
+ percentage of total system time for this specific thread.</p></desc>
+ </datatype>
+ <datatype>
+ <name name="msacc_stats_counters"/>
+ <desc><p>A map containing the different microstate accounting states. Each
+ value in the map contains another map with the percentage of time that
+ this thread has spent in the specific state. Both the percentage of
+ <c>system</c> time and the time for that specific <c>thread</c> is part of
+ the map.</p></desc>
+ </datatype>
+ <datatype>
+ <name name="msacc_type"/>
+ </datatype>
+ <datatype>
+ <name name="msacc_id"/>
+ </datatype>
+ <datatype>
+ <name name="msacc_state"/>
+ <desc><p>The different states that a thread can be in. See
+ <seealso marker="erts:erlang#statistics_microstate_accounting">
+ erlang:statistics(microstate_accounting)</seealso> for details.
+ </p></desc>
+ </datatype>
+ <datatype>
+ <name name="msacc_print_options"/>
+ <desc><p>The different options that can be given to
+ <seealso marker="#print-2"><c>print/2</c></seealso>.
+ </p></desc>
+ </datatype>
+ </datatypes>
+ <funcs>
+ <func>
+ <name name="available" arity="0"/>
+ <fsummary>Check if microstate accounting is available</fsummary>
+ <desc>
+ <p>This function checks whether microstate accounting
+ is available or not.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="start" arity="0"/>
+ <fsummary>Start microstate accounting.</fsummary>
+ <desc>
+ <p>Start microstate accounting. Returns whether it was
+ previously enabled or disabled.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="start" arity="1"/>
+ <fsummary>Start microstate accounting for a time.</fsummary>
+ <desc>
+ <p>Resets all counters and then starts microstate accounting
+ for the given milliseconds.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="stop" arity="0"/>
+ <fsummary>Stop microstate accounting.</fsummary>
+ <desc>
+ <p>Stop microstate accounting.
+ Returns whether is was previously enabled or disabled.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="reset" arity="0"/>
+ <fsummary>Reset microstate accounting counters</fsummary>
+ <desc>
+ <p>Reset microstate accounting counters.
+ Returns whether is was enabled or disabled.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="print" arity="0"/>
+ <fsummary>Print microstate statistics</fsummary>
+ <desc>
+ <p>
+ Prints the current microstate accounting to standard out.
+ Same as
+ <seealso marker="#print-1">
+ <c>msacc:print(msacc:stats(),#{}).</c>
+ </seealso>
+ </p>
+ </desc>
+ </func>
+ <func>
+ <name name="print" arity="1"/>
+ <fsummary>Print microstate statistics</fsummary>
+ <desc>
+ <p>Print the given microstate statistics values to stdout.
+ Same as
+ <seealso marker="#print-1">
+ <c>msacc:print(DataOrStats,#{}).</c>
+ </seealso>
+ </p>
+ </desc>
+ </func>
+ <func>
+ <name name="print" arity="2"/>
+ <fsummary>Print microstate statistics</fsummary>
+ <desc>
+ <p>Print the given microstate statistics values to standard out.
+ With many states this can be quite verbose. See the top of this
+ reference manual for a brief description of what the fields mean.</p>
+ <p>It is possible to print more specific types of statistics by
+ first manipulating the <c>DataOrStats</c> using
+ <seealso marker="#stats-2"><c>stats/2</c></seealso>.
+ For instance if you want to print the percentage of run-time for each
+ thread you can do:</p>
+ <pre><input>msacc:print(msacc:stats(runtime,msacc:stats())).</input></pre>
+ <p>If you want to only print run-time per thread type you can do:</p>
+ <pre><input>msacc:print(msacc:stats(type,msacc:stats(runtime,msacc:stats()))).</input></pre>
+ <p><em>Options</em></p>
+ <taglist>
+ <tag><c>system</c></tag><item>Print percentage of time spent in each
+ state out of system time as well as thread time.
+ Default: false.</item>
+ </taglist>
+ </desc>
+ </func>
+ <func>
+ <name name="print" arity="3"/>
+ <fsummary>Print microstate statistics</fsummary>
+ <desc>
+ <p>Print the given microstate statistics values to the given file
+ or device. The other arguments behave the same way as for
+ <seealso marker="#print-2"><c>print/2</c></seealso>.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="stats" arity="0"/>
+ <fsummary></fsummary>
+ <desc>
+ <p>Returns a runtime system independent version of the microstate
+ statistics data presented by
+ <seealso marker="erts:erlang#statistics_microstate_accounting">
+ <c>erlang:statistics(microstate_accounting)</c></seealso>.
+ All counters have been normalized to be in microsecond resolution.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="stats" arity="2" clause_i="1"/>
+ <fsummary></fsummary>
+ <desc>
+ <p>Returns the system time for the given microstate statistics values.
+ System time is the accumulated time of all threads.</p>
+ <taglist>
+ <tag><c>realtime</c></tag>
+ <item>Returns all time recorded for all threads.</item>
+ <tag><c>runtime</c></tag>
+ <item>Returns all time spent doing work for all threads, i.e.
+ all time not spent in the <c>sleep</c> state.</item>
+ </taglist>
+ </desc>
+ </func>
+ <func>
+ <name name="stats" arity="2" clause_i="2"/>
+ <fsummary></fsummary>
+ <desc>
+ <p>Returns fractions of real-time or run-time spent in the various
+ threads from the given microstate statistics values.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="stats" arity="2" clause_i="3"/>
+ <fsummary></fsummary>
+ <desc>
+ <p>Returns a list of microstate statistics values where the values
+ for all threads of the same type has been merged.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="to_file" arity="1"/>
+ <fsummary></fsummary>
+ <desc>
+ <p>Dumps the current microstate statistics counters to a file that can
+ be parsed with <seealso marker="kernel:file#consult/1">
+ file:consult/1</seealso>.</p>
+ </desc>
+ </func>
+ <func>
+ <name name="from_file" arity="1"/>
+ <fsummary></fsummary>
+ <desc>
+ <p>Read a file dump produced by <seealso marker="#to_file/1">
+ to_file(Filename)</seealso>.</p>
+ </desc>
+ </func>
+ </funcs>
+</erlref>