The R13B03 release.OTP_R13B03

1 files changed, 629 insertions, 0 deletions

diff --git a/lib/snmp/mibs/SNMP-TARGET-MIB.mib b/lib/snmp/mibs/SNMP-TARGET-MIB.mib
new file mode 100644
index 0000000000..b1b2c49753
--- /dev/null
+++ b/lib/snmp/mibs/SNMP-TARGET-MIB.mib
@@ -0,0 +1,629 @@
+   SNMP-TARGET-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Counter32,
+       Integer32
+           FROM SNMPv2-SMI
+
+       TEXTUAL-CONVENTION,
+       TDomain,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr
+           FROM SNMPv2-TC
+
+       SnmpSecurityModel,
+       SnmpMessageProcessingModel,
+       SnmpSecurityLevel,
+       SnmpAdminString
+           FROM SNMP-FRAMEWORK-MIB
+
+       MODULE-COMPLIANCE,
+       OBJECT-GROUP
+           FROM SNMPv2-CONF;
+
+   snmpTargetMIB MODULE-IDENTITY
+       LAST-UPDATED "9808040000Z"
+       ORGANIZATION "IETF SNMPv3 Working Group"
+       CONTACT-INFO
+           "WG-email:   [email protected]
+            Subscribe:  [email protected]
+                        In message body:  subscribe snmpv3
+
+            Chair:      Russ Mundy
+                        Trusted Information Systems
+            Postal:     3060 Washington Rd
+                        Glenwood MD 21738
+                        USA
+            EMail:      [email protected]
+            Phone:      +1-301-854-6889
+
+            Co-editor:  David B. Levi
+                        SNMP Research, Inc.
+            Postal:     3001 Kimberlin Heights Road
+                        Knoxville, TN 37920-9716
+            EMail:      [email protected]
+            Phone:      +1 423 573 1434
+
+            Co-editor:  Paul Meyer
+                        Secure Computing Corporation
+            Postal:     2675 Long Lake Road
+                        Roseville, MN 55113
+            EMail:      [email protected]
+            Phone:      +1 651 628 1592
+
+            Co-editor:  Bob Stewart
+                        Cisco Systems, Inc.
+            Postal:     170 West Tasman Drive
+                        San Jose, CA 95134-1706
+            EMail:      [email protected]
+            Phone:      +1 603 654 2686"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            mechanisms to remotely configure the parameters used
+            by an SNMP entity for the generation of SNMP messages."
+       REVISION    "9808040000Z"
+       DESCRIPTION "Clarifications, published as
+                    draft-ietf-snmpv3-appl-v2-01.txt."
+       REVISION    "9707140000Z"
+       DESCRIPTION "The initial revision, published as RFC2273."
+       ::= { snmpModules 12 }
+
+   snmpTargetObjects       OBJECT IDENTIFIER ::= { snmpTargetMIB 1 }
+   snmpTargetConformance   OBJECT IDENTIFIER ::= { snmpTargetMIB 3 }
+
+   SnmpTagValue ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "255a"
+       STATUS       current
+       DESCRIPTION
+           "An octet string containing a tag value.
+            Tag values are preferably in human-readable form.
+
+            To facilitate internationalization, this information
+            is represented using the ISO/IEC IS 10646-1 character
+            set, encoded as an octet string using the UTF-8
+            character encoding scheme described in RFC 2279.
+
+            Since additional code points are added by amendments
+            to the 10646 standard from time to time,
+            implementations must be prepared to encounter any code
+            point from 0x00000000 to 0x7fffffff.
+
+            The use of control codes should be avoided, and certain
+            control codes are not allowed as described below.
+
+            For code points not directly supported by user
+            interface hardware or software, an alternative means
+            of entry and display, such as hexadecimal, may be
+            provided.
+
+            For information encoded in 7-bit US-ASCII, the UTF-8
+            representation is identical to the US-ASCII encoding.
+
+            Note that when this TC is used for an object that
+            is used or envisioned to be used as an index, then a
+            SIZE restriction must be specified so that the number
+            of sub-identifiers for any object instance does not
+            exceed the limit of 128, as defined by [RFC1905].
+
+            An object of this type contains a single tag value
+            which is used to select a set of entries in a table.
+
+            A tag value is an arbitrary string of octets, but
+            may not contain a delimiter character.  Delimiter
+            characters are defined to be one of the following:
+
+                -  An ASCII space character (0x20).
+
+                -  An ASCII TAB character (0x09).
+
+                -  An ASCII carriage return (CR) character (0x0D).
+
+                -  An ASCII line feed (LF) character (0x0B).
+
+            Delimiter characters are used to separate tag values
+            in a tag list.  An object of this type may only
+            contain a single tag value, and so delimiter
+            characters are not allowed in a value of this type.
+
+            Some examples of valid tag values are:
+
+                - 'acme'
+
+                - 'router'
+
+                - 'host'
+
+            The use of a tag value to select table entries is
+            application and MIB specific."
+       SYNTAX       OCTET STRING (SIZE (0..255))
+
+   SnmpTagList ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "255a"
+       STATUS       current
+       DESCRIPTION
+           "An octet string containing a list of tag values.
+            Tag values are preferably in human-readable form.
+
+            To facilitate internationalization, this information
+            is represented using the ISO/IEC IS 10646-1 character
+            set, encoded as an octet string using the UTF-8
+            character encoding scheme described in RFC 2279.
+
+            Since additional code points are added by amendments
+            to the 10646 standard from time to time,
+            implementations must be prepared to encounter any code
+            point from 0x00000000 to 0x7fffffff.
+
+            The use of control codes should be avoided, except as
+            described below.
+
+            For code points not directly supported by user
+            interface hardware or software, an alternative means
+            of entry and display, such as hexadecimal, may be
+            provided.
+
+            For information encoded in 7-bit US-ASCII, the UTF-8
+            representation is identical to the US-ASCII encoding.
+
+            An object of this type contains a list of tag values
+            which are used to select a set of entries in a table.
+
+            A tag value is an arbitrary string of octets, but
+            may not contain a delimiter character.  Delimiter
+            characters are defined to be one of the following:
+
+                -  An ASCII space character (0x20).
+
+                -  An ASCII TAB character (0x09).
+
+                -  An ASCII carriage return (CR) character (0x0D).
+
+                -  An ASCII line feed (LF) character (0x0B).
+
+            Delimiter characters are used to separate tag values
+            in a tag list.  Only a single delimiter character may
+            occur between two tag values.  A tag value may not
+            have a zero length.  These constraints imply certain
+            restrictions on the contents of this object:
+
+                - There cannot be a leading or trailing delimiter
+                  character.
+
+                - There cannot be multiple adjacent delimiter
+                  characters.
+
+            Some examples of valid tag lists are:
+
+                - An empty string
+
+                - 'acme router'
+
+                - 'host managerStation'
+
+            Note that although a tag value may not have a length of
+            zero, an empty string is still valid.  This indicates
+            an empty list (i.e. there are no tag values in the list).
+
+            The use of the tag list to select table entries is
+            application and MIB specific.  Typically, an application
+            will provide one or more tag values, and any entry
+            which contains some combination of these tag values
+            will be selected."
+       SYNTAX       OCTET STRING (SIZE (0..255))
+
+   --
+   --
+   -- The snmpTargetObjects group
+   --
+   --
+
+   snmpTargetSpinLock OBJECT-TYPE
+       SYNTAX      TestAndIncr
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+           "This object is used to facilitate modification of table
+            entries in the SNMP-TARGET-MIB module by multiple
+            managers.  In particular, it is useful when modifying
+            the value of the snmpTargetAddrTagList object.
+
+            The procedure for modifying the snmpTargetAddrTagList
+            object is as follows:
+
+                1.  Retrieve the value of snmpTargetSpinLock and
+                    of snmpTargetAddrTagList.
+
+                2.  Generate a new value for snmpTargetAddrTagList.
+
+                3.  Set the value of snmpTargetSpinLock to the
+                    retrieved value, and the value of
+                    snmpTargetAddrTagList to the new value.  If
+                    the set fails for the snmpTargetSpinLock
+                    object, go back to step 1."
+       ::= { snmpTargetObjects 1 }
+
+   snmpTargetAddrTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF SnmpTargetAddrEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A table of transport addresses to be used in the generation
+            of SNMP messages."
+       ::= { snmpTargetObjects 2 }
+
+   snmpTargetAddrEntry OBJECT-TYPE
+       SYNTAX      SnmpTargetAddrEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A transport address to be used in the generation
+            of SNMP operations.
+
+            Entries in the snmpTargetAddrTable are created and
+            deleted using the snmpTargetAddrRowStatus object."
+       INDEX { IMPLIED snmpTargetAddrName }
+       ::= { snmpTargetAddrTable 1 }
+
+   SnmpTargetAddrEntry ::= SEQUENCE {
+       snmpTargetAddrName         SnmpAdminString,
+       snmpTargetAddrTDomain      TDomain,
+       snmpTargetAddrTAddress     TAddress,
+       snmpTargetAddrTimeout      TimeInterval,
+       snmpTargetAddrRetryCount   Integer32,
+       snmpTargetAddrTagList      SnmpTagList,
+       snmpTargetAddrParams       SnmpAdminString,
+       snmpTargetAddrStorageType  StorageType,
+       snmpTargetAddrRowStatus    RowStatus
+   }
+
+   snmpTargetAddrName OBJECT-TYPE
+       SYNTAX      SnmpAdminString (SIZE(1..32))
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "The locally arbitrary, but unique identifier associated
+            with this snmpTargetAddrEntry."
+       ::= { snmpTargetAddrEntry 1 }
+
+   snmpTargetAddrTDomain OBJECT-TYPE
+       SYNTAX      TDomain
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "This object indicates the transport type of the address
+            contained in the snmpTargetAddrTAddress object."
+       ::= { snmpTargetAddrEntry 2 }
+
+   snmpTargetAddrTAddress OBJECT-TYPE
+       SYNTAX      TAddress
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "This object contains a transport address.  The format of
+            this address depends on the value of the
+            snmpTargetAddrTDomain object."
+       ::= { snmpTargetAddrEntry 3 }
+
+   snmpTargetAddrTimeout OBJECT-TYPE
+       SYNTAX      TimeInterval
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "This object should reflect the expected maximum round
+            trip time for communicating with the transport address
+            defined by this row.  When a message is sent to this
+            address, and a response (if one is expected) is not
+            received within this time period, an implementation
+            may assume that the response will not be delivered.
+
+            Note that the time interval that an application waits
+            for a response may actually be derived from the value
+            of this object.  The method for deriving the actual time
+            interval is implementation dependent.  One such method
+            is to derive the expected round trip time based on a
+            particular retransmission algorithm and on the number
+            of timeouts which have occurred.  The type of message may
+            also be considered when deriving expected round trip
+            times for retransmissions.  For example, if a message is
+            being sent with a securityLevel that indicates both
+            authentication and privacy, the derived value may be
+            increased to compensate for extra processing time spent
+            during authentication and encryption processing."
+       DEFVAL { 1500 }
+       ::= { snmpTargetAddrEntry 4 }
+
+   snmpTargetAddrRetryCount OBJECT-TYPE
+       SYNTAX      Integer32 (0..255)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "This object specifies a default number of retries to be
+            attempted when a response is not received for a generated
+            message.  An application may provide its own retry count,
+            in which case the value of this object is ignored."
+       DEFVAL { 3 }
+       ::= { snmpTargetAddrEntry 5 }
+
+   snmpTargetAddrTagList OBJECT-TYPE
+       SYNTAX      SnmpTagList
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "This object contains a list of tag values which are
+            used to select target addresses for a particular
+            operation."
+       DEFVAL { "" }
+       ::= { snmpTargetAddrEntry 6 }
+
+   snmpTargetAddrParams OBJECT-TYPE
+       SYNTAX      SnmpAdminString (SIZE(1..32))
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The value of this object identifies an entry in the
+            snmpTargetParamsTable.  The identified entry
+            contains SNMP parameters to be used when generating
+            messages to be sent to this transport address."
+       ::= { snmpTargetAddrEntry 7 }
+
+   snmpTargetAddrStorageType OBJECT-TYPE
+       SYNTAX      StorageType
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The storage type for this conceptual row."
+       DEFVAL { nonVolatile }
+       ::= { snmpTargetAddrEntry 8 }
+
+   snmpTargetAddrRowStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The status of this conceptual row.
+
+            To create a row in this table, a manager must
+            set this object to either createAndGo(4) or
+            createAndWait(5).
+
+            Until instances of all corresponding columns are
+            appropriately configured, the value of the
+            corresponding instance of the snmpTargetAddrRowStatus
+            column is 'notReady'.
+
+            In particular, a newly created row cannot be made
+            active until the corresponding instances of
+            snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
+            snmpTargetAddrParams have all been set.
+
+            The following objects may not be modified while the
+            value of this object is active(1):
+                - snmpTargetAddrTDomain
+                - snmpTargetAddrTAddress
+            An attempt to set these objects while the value of
+            snmpTargetAddrRowStatus is active(1) will result in
+            an inconsistentValue error."
+       ::= { snmpTargetAddrEntry 9 }
+
+   snmpTargetParamsTable OBJECT-TYPE
+       SYNTAX      SEQUENCE OF SnmpTargetParamsEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A table of SNMP target information to be used
+            in the generation of SNMP messages."
+       ::= { snmpTargetObjects 3 }
+
+   snmpTargetParamsEntry OBJECT-TYPE
+       SYNTAX      SnmpTargetParamsEntry
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "A set of SNMP target information.
+
+            Entries in the snmpTargetParamsTable are created and
+            deleted using the snmpTargetParamsRowStatus object."
+       INDEX { IMPLIED snmpTargetParamsName }
+       ::= { snmpTargetParamsTable 1 }
+
+   SnmpTargetParamsEntry ::= SEQUENCE {
+       snmpTargetParamsName           SnmpAdminString,
+       snmpTargetParamsMPModel        SnmpMessageProcessingModel,
+       snmpTargetParamsSecurityModel  SnmpSecurityModel,
+       snmpTargetParamsSecurityName   SnmpAdminString,
+       snmpTargetParamsSecurityLevel  SnmpSecurityLevel,
+       snmpTargetParamsStorageType    StorageType,
+       snmpTargetParamsRowStatus      RowStatus
+   }
+
+   snmpTargetParamsName OBJECT-TYPE
+       SYNTAX      SnmpAdminString (SIZE(1..32))
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+           "The locally arbitrary, but unique identifier associated
+            with this snmpTargetParamsEntry."
+       ::= { snmpTargetParamsEntry 1 }
+
+   snmpTargetParamsMPModel OBJECT-TYPE
+       SYNTAX      SnmpMessageProcessingModel
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The Message Processing Model to be used when generating
+            SNMP messages using this entry."
+       ::= { snmpTargetParamsEntry 2 }
+
+   snmpTargetParamsSecurityModel OBJECT-TYPE
+       SYNTAX      SnmpSecurityModel (1..2147483647)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The Security Model to be used when generating SNMP
+             messages using this entry.  An implementation may
+             choose to return an inconsistentValue error if an
+             attempt is made to set this variable to a value
+             for a security model which the implementation does
+             not support."
+       ::= { snmpTargetParamsEntry 3 }
+
+   snmpTargetParamsSecurityName OBJECT-TYPE
+       SYNTAX      SnmpAdminString
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The securityName which identifies the Principal on
+            whose behalf SNMP messages will be generated using
+            this entry."
+       ::= { snmpTargetParamsEntry 4 }
+
+   snmpTargetParamsSecurityLevel OBJECT-TYPE
+       SYNTAX      SnmpSecurityLevel
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The Level of Security to be used when generating
+            SNMP messages using this entry."
+       ::= { snmpTargetParamsEntry 5 }
+
+   snmpTargetParamsStorageType OBJECT-TYPE
+       SYNTAX      StorageType
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The storage type for this conceptual row."
+       DEFVAL { nonVolatile }
+       ::= { snmpTargetParamsEntry 6 }
+
+   snmpTargetParamsRowStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The status of this conceptual row.
+
+            To create a row in this table, a manager must
+            set this object to either createAndGo(4) or
+            createAndWait(5).
+
+            Until instances of all corresponding columns are
+            appropriately configured, the value of the
+            corresponding instance of the snmpTargetParamsRowStatus
+            column is 'notReady'.
+
+            In particular, a newly created row cannot be made
+            active until the corresponding
+            snmpTargetParamsMPModel,
+            snmpTargetParamsSecurityModel,
+            snmpTargetParamsSecurityName,
+            and snmpTargetParamsSecurityLevel have all been set.
+
+            The following objects may not be modified while the
+            value of this object is active(1):
+                - snmpTargetParamsMPModel
+                - snmpTargetParamsSecurityModel
+                - snmpTargetParamsSecurityName
+                - snmpTargetParamsSecurityLevel
+            An attempt to set these objects while the value of
+            snmpTargetParamsRowStatus is active(1) will result in
+            an inconsistentValue error."
+       ::= { snmpTargetParamsEntry 7 }
+
+   snmpUnavailableContexts OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The total number of packets received by the SNMP
+            engine which were dropped because the context
+            contained in the message was unavailable."
+       ::= { snmpTargetObjects 4 }
+
+   snmpUnknownContexts OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "The total number of packets received by the SNMP
+            engine which were dropped because the context
+            contained in the message was unknown."
+       ::= { snmpTargetObjects 5 }
+
+   --
+   --
+   -- Conformance information
+   --
+   --
+
+   snmpTargetCompliances OBJECT IDENTIFIER ::=
+                                           { snmpTargetConformance 1 }
+   snmpTargetGroups      OBJECT IDENTIFIER ::=
+                                           { snmpTargetConformance 2 }
+
+   --
+   --
+   -- Compliance statements
+   --
+   --
+   snmpTargetCommandResponderCompliance MODULE-COMPLIANCE
+       STATUS      current
+       DESCRIPTION
+           "The compliance statement for SNMP entities which include
+            a command responder application."
+       MODULE -- This Module
+           MANDATORY-GROUPS { snmpTargetCommandResponderGroup }
+       ::= { snmpTargetCompliances 1 }
+
+   snmpTargetBasicGroup OBJECT-GROUP
+       OBJECTS {
+           snmpTargetSpinLock,
+           snmpTargetAddrTDomain,
+           snmpTargetAddrTAddress,
+           snmpTargetAddrTagList,
+           snmpTargetAddrParams,
+           snmpTargetAddrStorageType,
+           snmpTargetAddrRowStatus,
+           snmpTargetParamsMPModel,
+           snmpTargetParamsSecurityModel,
+           snmpTargetParamsSecurityName,
+           snmpTargetParamsSecurityLevel,
+           snmpTargetParamsStorageType,
+           snmpTargetParamsRowStatus
+       }
+       STATUS      current
+       DESCRIPTION
+           "A collection of objects providing basic remote
+            configuration of management targets."
+       ::= { snmpTargetGroups 1 }
+
+   snmpTargetResponseGroup OBJECT-GROUP
+       OBJECTS {
+           snmpTargetAddrTimeout,
+           snmpTargetAddrRetryCount
+       }
+       STATUS      current
+       DESCRIPTION
+           "A collection of objects providing remote configuration
+            of management targets for applications which generate
+            SNMP messages for which a response message would be
+            expected."
+       ::= { snmpTargetGroups 2 }
+
+   snmpTargetCommandResponderGroup OBJECT-GROUP
+       OBJECTS {
+           snmpUnavailableContexts,
+           snmpUnknownContexts
+       }
+       STATUS      current
+       DESCRIPTION
+           "A collection of objects required for command responder
+            applications, used for counting error conditions."
+       ::= { snmpTargetGroups 3 }
+
+   END