aboutsummaryrefslogtreecommitdiffstats
path: root/lib/snmp/mibs/SNMP-TARGET-MIB.mib
diff options
context:
space:
mode:
authorErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
committerErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
commit84adefa331c4159d432d22840663c38f155cd4c1 (patch)
treebff9a9c66adda4df2106dfd0e5c053ab182a12bd /lib/snmp/mibs/SNMP-TARGET-MIB.mib
downloadotp-84adefa331c4159d432d22840663c38f155cd4c1.tar.gz
otp-84adefa331c4159d432d22840663c38f155cd4c1.tar.bz2
otp-84adefa331c4159d432d22840663c38f155cd4c1.zip
The R13B03 release.OTP_R13B03
Diffstat (limited to 'lib/snmp/mibs/SNMP-TARGET-MIB.mib')
-rw-r--r--lib/snmp/mibs/SNMP-TARGET-MIB.mib629
1 files changed, 629 insertions, 0 deletions
diff --git a/lib/snmp/mibs/SNMP-TARGET-MIB.mib b/lib/snmp/mibs/SNMP-TARGET-MIB.mib
new file mode 100644
index 0000000000..b1b2c49753
--- /dev/null
+++ b/lib/snmp/mibs/SNMP-TARGET-MIB.mib
@@ -0,0 +1,629 @@
+ SNMP-TARGET-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ snmpModules,
+ Counter32,
+ Integer32
+ FROM SNMPv2-SMI
+
+ TEXTUAL-CONVENTION,
+ TDomain,
+ TAddress,
+ TimeInterval,
+ RowStatus,
+ StorageType,
+ TestAndIncr
+ FROM SNMPv2-TC
+
+ SnmpSecurityModel,
+ SnmpMessageProcessingModel,
+ SnmpSecurityLevel,
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+ snmpTargetMIB MODULE-IDENTITY
+ LAST-UPDATED "9808040000Z"
+ ORGANIZATION "IETF SNMPv3 Working Group"
+ CONTACT-INFO
+ "WG-email: [email protected]
+ Subscribe: [email protected]
+ In message body: subscribe snmpv3
+
+ Chair: Russ Mundy
+ Trusted Information Systems
+ Postal: 3060 Washington Rd
+ Glenwood MD 21738
+ USA
+ Phone: +1-301-854-6889
+
+ Co-editor: David B. Levi
+ SNMP Research, Inc.
+ Postal: 3001 Kimberlin Heights Road
+ Knoxville, TN 37920-9716
+ Phone: +1 423 573 1434
+
+ Co-editor: Paul Meyer
+ Secure Computing Corporation
+ Postal: 2675 Long Lake Road
+ Roseville, MN 55113
+ Phone: +1 651 628 1592
+
+ Co-editor: Bob Stewart
+ Cisco Systems, Inc.
+ Postal: 170 West Tasman Drive
+ San Jose, CA 95134-1706
+ Phone: +1 603 654 2686"
+ DESCRIPTION
+ "This MIB module defines MIB objects which provide
+ mechanisms to remotely configure the parameters used
+ by an SNMP entity for the generation of SNMP messages."
+ REVISION "9808040000Z"
+ DESCRIPTION "Clarifications, published as
+ draft-ietf-snmpv3-appl-v2-01.txt."
+ REVISION "9707140000Z"
+ DESCRIPTION "The initial revision, published as RFC2273."
+ ::= { snmpModules 12 }
+
+ snmpTargetObjects OBJECT IDENTIFIER ::= { snmpTargetMIB 1 }
+ snmpTargetConformance OBJECT IDENTIFIER ::= { snmpTargetMIB 3 }
+
+ SnmpTagValue ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "An octet string containing a tag value.
+ Tag values are preferably in human-readable form.
+
+ To facilitate internationalization, this information
+ is represented using the ISO/IEC IS 10646-1 character
+ set, encoded as an octet string using the UTF-8
+ character encoding scheme described in RFC 2279.
+
+ Since additional code points are added by amendments
+ to the 10646 standard from time to time,
+ implementations must be prepared to encounter any code
+ point from 0x00000000 to 0x7fffffff.
+
+ The use of control codes should be avoided, and certain
+ control codes are not allowed as described below.
+
+ For code points not directly supported by user
+ interface hardware or software, an alternative means
+ of entry and display, such as hexadecimal, may be
+ provided.
+
+ For information encoded in 7-bit US-ASCII, the UTF-8
+ representation is identical to the US-ASCII encoding.
+
+ Note that when this TC is used for an object that
+ is used or envisioned to be used as an index, then a
+ SIZE restriction must be specified so that the number
+ of sub-identifiers for any object instance does not
+ exceed the limit of 128, as defined by [RFC1905].
+
+ An object of this type contains a single tag value
+ which is used to select a set of entries in a table.
+
+ A tag value is an arbitrary string of octets, but
+ may not contain a delimiter character. Delimiter
+ characters are defined to be one of the following:
+
+ - An ASCII space character (0x20).
+
+ - An ASCII TAB character (0x09).
+
+ - An ASCII carriage return (CR) character (0x0D).
+
+ - An ASCII line feed (LF) character (0x0B).
+
+ Delimiter characters are used to separate tag values
+ in a tag list. An object of this type may only
+ contain a single tag value, and so delimiter
+ characters are not allowed in a value of this type.
+
+ Some examples of valid tag values are:
+
+ - 'acme'
+
+ - 'router'
+
+ - 'host'
+
+ The use of a tag value to select table entries is
+ application and MIB specific."
+ SYNTAX OCTET STRING (SIZE (0..255))
+
+ SnmpTagList ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "An octet string containing a list of tag values.
+ Tag values are preferably in human-readable form.
+
+ To facilitate internationalization, this information
+ is represented using the ISO/IEC IS 10646-1 character
+ set, encoded as an octet string using the UTF-8
+ character encoding scheme described in RFC 2279.
+
+ Since additional code points are added by amendments
+ to the 10646 standard from time to time,
+ implementations must be prepared to encounter any code
+ point from 0x00000000 to 0x7fffffff.
+
+ The use of control codes should be avoided, except as
+ described below.
+
+ For code points not directly supported by user
+ interface hardware or software, an alternative means
+ of entry and display, such as hexadecimal, may be
+ provided.
+
+ For information encoded in 7-bit US-ASCII, the UTF-8
+ representation is identical to the US-ASCII encoding.
+
+ An object of this type contains a list of tag values
+ which are used to select a set of entries in a table.
+
+ A tag value is an arbitrary string of octets, but
+ may not contain a delimiter character. Delimiter
+ characters are defined to be one of the following:
+
+ - An ASCII space character (0x20).
+
+ - An ASCII TAB character (0x09).
+
+ - An ASCII carriage return (CR) character (0x0D).
+
+ - An ASCII line feed (LF) character (0x0B).
+
+ Delimiter characters are used to separate tag values
+ in a tag list. Only a single delimiter character may
+ occur between two tag values. A tag value may not
+ have a zero length. These constraints imply certain
+ restrictions on the contents of this object:
+
+ - There cannot be a leading or trailing delimiter
+ character.
+
+ - There cannot be multiple adjacent delimiter
+ characters.
+
+ Some examples of valid tag lists are:
+
+ - An empty string
+
+ - 'acme router'
+
+ - 'host managerStation'
+
+ Note that although a tag value may not have a length of
+ zero, an empty string is still valid. This indicates
+ an empty list (i.e. there are no tag values in the list).
+
+ The use of the tag list to select table entries is
+ application and MIB specific. Typically, an application
+ will provide one or more tag values, and any entry
+ which contains some combination of these tag values
+ will be selected."
+ SYNTAX OCTET STRING (SIZE (0..255))
+
+ --
+ --
+ -- The snmpTargetObjects group
+ --
+ --
+
+ snmpTargetSpinLock OBJECT-TYPE
+ SYNTAX TestAndIncr
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to facilitate modification of table
+ entries in the SNMP-TARGET-MIB module by multiple
+ managers. In particular, it is useful when modifying
+ the value of the snmpTargetAddrTagList object.
+
+ The procedure for modifying the snmpTargetAddrTagList
+ object is as follows:
+
+ 1. Retrieve the value of snmpTargetSpinLock and
+ of snmpTargetAddrTagList.
+
+ 2. Generate a new value for snmpTargetAddrTagList.
+
+ 3. Set the value of snmpTargetSpinLock to the
+ retrieved value, and the value of
+ snmpTargetAddrTagList to the new value. If
+ the set fails for the snmpTargetSpinLock
+ object, go back to step 1."
+ ::= { snmpTargetObjects 1 }
+
+ snmpTargetAddrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpTargetAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of transport addresses to be used in the generation
+ of SNMP messages."
+ ::= { snmpTargetObjects 2 }
+
+ snmpTargetAddrEntry OBJECT-TYPE
+ SYNTAX SnmpTargetAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A transport address to be used in the generation
+ of SNMP operations.
+
+ Entries in the snmpTargetAddrTable are created and
+ deleted using the snmpTargetAddrRowStatus object."
+ INDEX { IMPLIED snmpTargetAddrName }
+ ::= { snmpTargetAddrTable 1 }
+
+ SnmpTargetAddrEntry ::= SEQUENCE {
+ snmpTargetAddrName SnmpAdminString,
+ snmpTargetAddrTDomain TDomain,
+ snmpTargetAddrTAddress TAddress,
+ snmpTargetAddrTimeout TimeInterval,
+ snmpTargetAddrRetryCount Integer32,
+ snmpTargetAddrTagList SnmpTagList,
+ snmpTargetAddrParams SnmpAdminString,
+ snmpTargetAddrStorageType StorageType,
+ snmpTargetAddrRowStatus RowStatus
+ }
+
+ snmpTargetAddrName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The locally arbitrary, but unique identifier associated
+ with this snmpTargetAddrEntry."
+ ::= { snmpTargetAddrEntry 1 }
+
+ snmpTargetAddrTDomain OBJECT-TYPE
+ SYNTAX TDomain
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the transport type of the address
+ contained in the snmpTargetAddrTAddress object."
+ ::= { snmpTargetAddrEntry 2 }
+
+ snmpTargetAddrTAddress OBJECT-TYPE
+ SYNTAX TAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object contains a transport address. The format of
+ this address depends on the value of the
+ snmpTargetAddrTDomain object."
+ ::= { snmpTargetAddrEntry 3 }
+
+ snmpTargetAddrTimeout OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object should reflect the expected maximum round
+ trip time for communicating with the transport address
+ defined by this row. When a message is sent to this
+ address, and a response (if one is expected) is not
+ received within this time period, an implementation
+ may assume that the response will not be delivered.
+
+ Note that the time interval that an application waits
+ for a response may actually be derived from the value
+ of this object. The method for deriving the actual time
+ interval is implementation dependent. One such method
+ is to derive the expected round trip time based on a
+ particular retransmission algorithm and on the number
+ of timeouts which have occurred. The type of message may
+ also be considered when deriving expected round trip
+ times for retransmissions. For example, if a message is
+ being sent with a securityLevel that indicates both
+ authentication and privacy, the derived value may be
+ increased to compensate for extra processing time spent
+ during authentication and encryption processing."
+ DEFVAL { 1500 }
+ ::= { snmpTargetAddrEntry 4 }
+
+ snmpTargetAddrRetryCount OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies a default number of retries to be
+ attempted when a response is not received for a generated
+ message. An application may provide its own retry count,
+ in which case the value of this object is ignored."
+ DEFVAL { 3 }
+ ::= { snmpTargetAddrEntry 5 }
+
+ snmpTargetAddrTagList OBJECT-TYPE
+ SYNTAX SnmpTagList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object contains a list of tag values which are
+ used to select target addresses for a particular
+ operation."
+ DEFVAL { "" }
+ ::= { snmpTargetAddrEntry 6 }
+
+ snmpTargetAddrParams OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies an entry in the
+ snmpTargetParamsTable. The identified entry
+ contains SNMP parameters to be used when generating
+ messages to be sent to this transport address."
+ ::= { snmpTargetAddrEntry 7 }
+
+ snmpTargetAddrStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type for this conceptual row."
+ DEFVAL { nonVolatile }
+ ::= { snmpTargetAddrEntry 8 }
+
+ snmpTargetAddrRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to either createAndGo(4) or
+ createAndWait(5).
+
+ Until instances of all corresponding columns are
+ appropriately configured, the value of the
+ corresponding instance of the snmpTargetAddrRowStatus
+ column is 'notReady'.
+
+ In particular, a newly created row cannot be made
+ active until the corresponding instances of
+ snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
+ snmpTargetAddrParams have all been set.
+
+ The following objects may not be modified while the
+ value of this object is active(1):
+ - snmpTargetAddrTDomain
+ - snmpTargetAddrTAddress
+ An attempt to set these objects while the value of
+ snmpTargetAddrRowStatus is active(1) will result in
+ an inconsistentValue error."
+ ::= { snmpTargetAddrEntry 9 }
+
+ snmpTargetParamsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpTargetParamsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of SNMP target information to be used
+ in the generation of SNMP messages."
+ ::= { snmpTargetObjects 3 }
+
+ snmpTargetParamsEntry OBJECT-TYPE
+ SYNTAX SnmpTargetParamsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of SNMP target information.
+
+ Entries in the snmpTargetParamsTable are created and
+ deleted using the snmpTargetParamsRowStatus object."
+ INDEX { IMPLIED snmpTargetParamsName }
+ ::= { snmpTargetParamsTable 1 }
+
+ SnmpTargetParamsEntry ::= SEQUENCE {
+ snmpTargetParamsName SnmpAdminString,
+ snmpTargetParamsMPModel SnmpMessageProcessingModel,
+ snmpTargetParamsSecurityModel SnmpSecurityModel,
+ snmpTargetParamsSecurityName SnmpAdminString,
+ snmpTargetParamsSecurityLevel SnmpSecurityLevel,
+ snmpTargetParamsStorageType StorageType,
+ snmpTargetParamsRowStatus RowStatus
+ }
+
+ snmpTargetParamsName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The locally arbitrary, but unique identifier associated
+ with this snmpTargetParamsEntry."
+ ::= { snmpTargetParamsEntry 1 }
+
+ snmpTargetParamsMPModel OBJECT-TYPE
+ SYNTAX SnmpMessageProcessingModel
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Message Processing Model to be used when generating
+ SNMP messages using this entry."
+ ::= { snmpTargetParamsEntry 2 }
+
+ snmpTargetParamsSecurityModel OBJECT-TYPE
+ SYNTAX SnmpSecurityModel (1..2147483647)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Security Model to be used when generating SNMP
+ messages using this entry. An implementation may
+ choose to return an inconsistentValue error if an
+ attempt is made to set this variable to a value
+ for a security model which the implementation does
+ not support."
+ ::= { snmpTargetParamsEntry 3 }
+
+ snmpTargetParamsSecurityName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The securityName which identifies the Principal on
+ whose behalf SNMP messages will be generated using
+ this entry."
+ ::= { snmpTargetParamsEntry 4 }
+
+ snmpTargetParamsSecurityLevel OBJECT-TYPE
+ SYNTAX SnmpSecurityLevel
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Level of Security to be used when generating
+ SNMP messages using this entry."
+ ::= { snmpTargetParamsEntry 5 }
+
+ snmpTargetParamsStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type for this conceptual row."
+ DEFVAL { nonVolatile }
+ ::= { snmpTargetParamsEntry 6 }
+
+ snmpTargetParamsRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to either createAndGo(4) or
+ createAndWait(5).
+
+ Until instances of all corresponding columns are
+ appropriately configured, the value of the
+ corresponding instance of the snmpTargetParamsRowStatus
+ column is 'notReady'.
+
+ In particular, a newly created row cannot be made
+ active until the corresponding
+ snmpTargetParamsMPModel,
+ snmpTargetParamsSecurityModel,
+ snmpTargetParamsSecurityName,
+ and snmpTargetParamsSecurityLevel have all been set.
+
+ The following objects may not be modified while the
+ value of this object is active(1):
+ - snmpTargetParamsMPModel
+ - snmpTargetParamsSecurityModel
+ - snmpTargetParamsSecurityName
+ - snmpTargetParamsSecurityLevel
+ An attempt to set these objects while the value of
+ snmpTargetParamsRowStatus is active(1) will result in
+ an inconsistentValue error."
+ ::= { snmpTargetParamsEntry 7 }
+
+ snmpUnavailableContexts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received by the SNMP
+ engine which were dropped because the context
+ contained in the message was unavailable."
+ ::= { snmpTargetObjects 4 }
+
+ snmpUnknownContexts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received by the SNMP
+ engine which were dropped because the context
+ contained in the message was unknown."
+ ::= { snmpTargetObjects 5 }
+
+ --
+ --
+ -- Conformance information
+ --
+ --
+
+ snmpTargetCompliances OBJECT IDENTIFIER ::=
+ { snmpTargetConformance 1 }
+ snmpTargetGroups OBJECT IDENTIFIER ::=
+ { snmpTargetConformance 2 }
+
+ --
+ --
+ -- Compliance statements
+ --
+ --
+ snmpTargetCommandResponderCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which include
+ a command responder application."
+ MODULE -- This Module
+ MANDATORY-GROUPS { snmpTargetCommandResponderGroup }
+ ::= { snmpTargetCompliances 1 }
+
+ snmpTargetBasicGroup OBJECT-GROUP
+ OBJECTS {
+ snmpTargetSpinLock,
+ snmpTargetAddrTDomain,
+ snmpTargetAddrTAddress,
+ snmpTargetAddrTagList,
+ snmpTargetAddrParams,
+ snmpTargetAddrStorageType,
+ snmpTargetAddrRowStatus,
+ snmpTargetParamsMPModel,
+ snmpTargetParamsSecurityModel,
+ snmpTargetParamsSecurityName,
+ snmpTargetParamsSecurityLevel,
+ snmpTargetParamsStorageType,
+ snmpTargetParamsRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic remote
+ configuration of management targets."
+ ::= { snmpTargetGroups 1 }
+
+ snmpTargetResponseGroup OBJECT-GROUP
+ OBJECTS {
+ snmpTargetAddrTimeout,
+ snmpTargetAddrRetryCount
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing remote configuration
+ of management targets for applications which generate
+ SNMP messages for which a response message would be
+ expected."
+ ::= { snmpTargetGroups 2 }
+
+ snmpTargetCommandResponderGroup OBJECT-GROUP
+ OBJECTS {
+ snmpUnavailableContexts,
+ snmpUnknownContexts
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects required for command responder
+ applications, used for counting error conditions."
+ ::= { snmpTargetGroups 3 }
+
+ END