diff options
Diffstat (limited to 'lib/inets/test/httpd_test_data/server_root/conf/httpd.conf')
| -rw-r--r-- | lib/inets/test/httpd_test_data/server_root/conf/httpd.conf | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/lib/inets/test/httpd_test_data/server_root/conf/httpd.conf b/lib/inets/test/httpd_test_data/server_root/conf/httpd.conf new file mode 100644 index 0000000000..8a74ed1afd --- /dev/null +++ b/lib/inets/test/httpd_test_data/server_root/conf/httpd.conf @@ -0,0 +1,268 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 1997-2009. All Rights Reserved. +# +# The contents of this file are subject to the Erlang Public License, +# Version 1.1, (the "License"); you may not use this file except in +# compliance with the License. You should have received a copy of the +# Erlang Public License along with this software. If not, it can be +# retrieved online at http://www.erlang.org/. +# +# Software distributed under the License is distributed on an "AS IS" +# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +# the License for the specific language governing rights and limitations +# under the License. +# +# %CopyrightEnd% +# +# + +# Port: The port the standalone listens to. For ports < 1023, you will +# need httpd to be run as root initially. + +Port 8888 + +# BindAddress: This directive is used to tell the server which IP address +# to listen to. It can either contain "*", an IP address, or a fully +# qualified Internet domain name. +# +# It is also possible to specify the ip-family with the directive. +# There ar three possible value: inet, inet6 and inet6fb4 +# inet: Use IpFamily inet when retreiving the address and +# fail if that does not work. +# inet6: Use IpFamily inet6 when retreiving the address and +# fail if that does not work. +# inet6fb4: First IpFamily inet6 is tried and if that does not work, +# inet is used as fallback. +# Default value for ip-family is inet6fb4 +# +# The syntax is: <address>[|<ip-family>] +# +#BindAddress * +#BindAddress *|inet + + +# ServerName allows you to set a host name which is sent back to clients for +# your server if it's different than the one the program would get (i.e. use +# "www" instead of the host's real name). +# +# Note: You cannot just invent host names and hope they work. The name you +# define here must be a valid DNS name for your host. If you don't understand +# this, ask your network administrator. + +#ServerName your.server.net + +# SocketType is either ip_comm, sockets or ssl. + +SocketType ip_comm + +# Modules: Server run-time plug-in modules written using the Erlang +# Web Server API (EWSAPI). The server API make it easy to add functionality +# to the server. Read more about EWSAPI in the Reference Manual. +# WARNING! Do not tamper with this directive unless you are familiar with +# EWSAPI. + +Modules mod_alias mod_auth mod_esi mod_actions mod_cgi mod_responsecontrol mod_trace mod_range mod_head mod_include mod_dir mod_get mod_log mod_disk_log + +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. + +ServerAdmin [email protected] + +# ServerRoot: The directory the server's config, error, and log files +# are kept in + +ServerRoot /var/tmp/server_root + +# ErrorLog: The location of the error log file. If this does not start +# with /, ServerRoot is prepended to it. + +ErrorLog logs/error_log + +# TransferLog: The location of the transfer log file. If this does not +# start with /, ServerRoot is prepended to it. + +TransferLog logs/access_log + +# SecurityLog: The location of the security log file (mod_security required) +# +SecurityLog logs/security_log + +# ErrorDiskLog: The location of the error log file. If this does not +# start with /, ServerRoot is prepended to it. This log file is managed +# with the disk_log module [See disk_log(3)]. The ErrorDiskLogSize directive +# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most +# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and +# truncates the first file. + +ErrorDiskLog logs/error_disk_log +ErrorDiskLogSize 200000 10 + +# TransferDiskLog: The location of the transfer log file. If this does not +# start with /, ServerRoot is prepended to it. This log file is managed +# with the disk_log module [See disk_log(3)]. The TransferDiskLogSize directive +# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most +# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and +# truncates the first file. + +TransferDiskLog logs/access_disk_log +TransferDiskLogSize 200000 10 + +# SecurityDiskLog: The location of the security log file. If this does not +# start with /, ServerRoot is prepended to it. This log file is managed +# with the disk_log module [See disk_log(3)]. The SecurityDiskLogSize directive +# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most +# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and +# truncates the first file. + +SecurityDiskLog logs/security_disk_log +SecurityDiskLogSize 200000 10 + +# Limit on total number of servers running, i.e., limit on the number +# of clients who can simultaneously connect --- if this limit is ever +# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. +# It is intended mainly as a brake to keep a runaway server from taking +# the server with it as it spirals down... + +MaxClients 50 + +# KeepAlive set the flag for persistent connections. For peristent connections +# set KeepAlive to on. To use One request per connection set the flag to off +# Note: The value has changed since previous version of INETS. +KeepAlive on + +# KeepAliveTimeout sets the number of seconds before a persistent connection +# times out and closes. +KeepAliveTimeout 10 + +# MaxKeepAliveRequests sets the number of seconds before a persistent connection +# times out and closes. +MaxKeepAliveRequests 10 + + + +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. + +DocumentRoot /var/tmp/server_root/htdocs + +# DirectoryIndex: Name of the file or files to use as a pre-written HTML +# directory index. Separate multiple entries with spaces. + +DirectoryIndex index.html welcome.html + +# DefaultType is the default MIME type for documents which the server +# cannot find the type of from filename extensions. + +DefaultType text/plain + +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname + +Alias /icons/ /var/tmp/server_root/icons/ +Alias /pics/ /var/tmp/server_root/icons/ + +# ScriptAlias: This controls which directories contain server scripts. +# Format: ScriptAlias fakename realname + +ScriptAlias /cgi-bin/ /var/tmp/server_root/cgi-bin/ +ScriptAlias /htbin/ /var/tmp/server_root/cgi-bin/ + +# This directive adds an action, which will activate cgi-script when a +# file is requested using the method of method, which can be one of +# GET, POST and HEAD. It sends the URL and file path of the requested +# document using the standard CGI PATH_INFO and PATH_TRANSLATED +# environment variables. + +#Script HEAD /cgi-bin/printenv.sh + +# This directive adds an action, which will activate cgi-script when a +# file of content type mime-type is requested. It sends the URL and +# file path of the requested document using the standard CGI PATH_INFO +# and PATH_TRANSLATED environment variables. + +#Action image/gif /cgi-bin/printenv.sh + +# ErlScriptAlias: This specifies how "Erl" server scripts are called. +# Format: ErlScriptAlias fakename realname allowed_modules + +ErlScriptAlias /down/erl httpd_example io + +# EvalScriptAlias: This specifies how "Eval" server scripts are called. +# Format: EvalScriptAlias fakename realname allowed_modules + +EvalScriptAlias /eval httpd_example io + +# Point SSLCertificateFile at a PEM encoded certificate. + +SSLCertificateFile /var/tmp/server_root/ssl/ssl_server.pem + +# If the key is not combined with the certificate, use this directive to +# point at the key file. + +SSLCertificateKeyFile /var/tmp/server_root/ssl/ssl_server.pem + +# Set SSLVerifyClient to: +# 0 if no certicate is required +# 1 if the client may present a valid certificate +# 2 if the client must present a valid certificate +# 3 if the client may present a valid certificate but it is not required to +# have a valid CA + +SSLVerifyClient 0 + +# Each directory to which INETS has access, can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). + +<Directory /var/tmp/server_root/htdocs/open> +AuthDBType plain +AuthName Open Area +AuthUserFile /var/tmp/server_root/auth/passwd +AuthGroupFile /var/tmp/server_root/auth/group +require user one Aladdin +</Directory> + +<Directory /var/tmp/server_root/htdocs/secret> +AuthDBType plain +AuthName Secret Area +AuthUserFile /var/tmp/server_root/auth/passwd +AuthGroupFile /var/tmp/server_root/auth/group +require group group1 group2 +</Directory> + +<Directory /var/tmp/server_root/htdocs/secret/top_secret> +AuthDBType plain +AuthName Top Secret Area +AuthUserFile /var/tmp/server_root/auth/passwd +AuthGroupFile /var/tmp/server_root/auth/group +require group group3 +</Directory> + +<Directory /var/tmp/server_root/htdocs/mnesia_open> +AuthDBType mnesia +AuthName Open Area +require user one Aladdin +</Directory> + +<Directory /var/tmp/server_root/htdocs/mnesia_secret> +AuthDBType mnesia +AuthName Secret Area +require group group1 group2 +</Directory> + +<Directory /var/tmp/server_root/htdocs/mnesia_secret/top_secret> +AuthDBType mnesia +AuthName Top Secret Area +require group group3 +allow from 130.100.34 130.100.35 +deny from 100.234.22.12 194.100.34.1 130.100.34.25 +SecurityDataFile logs/security_data +SecurityMaxRetries 3 +SecurityBlockTime 10 +SecurityFailExpireTime 1 +SecurityAuthTimeout 1 +SecurityCallbackModule security_callback +</Directory> |