diff options
Diffstat (limited to 'lib/os_mon/mibs/OTP-OS-MON-MIB.mib')
| -rw-r--r-- | lib/os_mon/mibs/OTP-OS-MON-MIB.mib | 423 |
1 files changed, 0 insertions, 423 deletions
diff --git a/lib/os_mon/mibs/OTP-OS-MON-MIB.mib b/lib/os_mon/mibs/OTP-OS-MON-MIB.mib deleted file mode 100644 index e027e96154..0000000000 --- a/lib/os_mon/mibs/OTP-OS-MON-MIB.mib +++ /dev/null @@ -1,423 +0,0 @@ --- --- %CopyrightBegin% --- --- Copyright Ericsson AB 1997-2016. All Rights Reserved. --- --- Licensed under the Apache License, Version 2.0 (the "License"); --- you may not use this file except in compliance with the License. --- You may obtain a copy of the License at --- --- http://www.apache.org/licenses/LICENSE-2.0 --- --- Unless required by applicable law or agreed to in writing, software --- distributed under the License is distributed on an "AS IS" BASIS, --- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. --- See the License for the specific language governing permissions and --- limitations under the License. --- --- %CopyrightEnd% --- - -OTP-OS-MON-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, - Counter32, Gauge32, Integer32, Unsigned32, Counter64 - FROM SNMPv2-SMI - TEXTUAL-CONVENTION, DisplayString - FROM SNMPv2-TC - MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP - FROM SNMPv2-CONF - otpModules, otpApplications - FROM OTP-REG - erlNodeId - FROM OTP-MIB - ; - - -otpOsMonModule MODULE-IDENTITY - LAST-UPDATED "0305090900Z" - ORGANIZATION "Ericsson" - CONTACT-INFO - "Contact: Erlang Support see license agreement for Erlang/OTP." - - DESCRIPTION - "This MIB is part of the OTP MIB. It defines MIB objects - for the os_mon application in OTP." - - REVISION "0508260900Z" - DESCRIPTION - "Removed dependeny on EVA." - REVISION "0305090900Z" - DESCRIPTION - "Changed CONTACT-INFO as it was outdated, made it more generic - to avoid such changes in the future." - - REVISION "9807080900Z" - DESCRIPTION - "Changed MAX-ACCESS for diskDescr from not-accessible to - read-only." - - REVISION "9801270900Z" - DESCRIPTION - "Changed erroneous name of this module to otpOsMonModule." - - REVISION "9712010900Z" - DESCRIPTION - "Converted to v2 SMI and placed in the OTP tree." - - REVISION "9608191700Z" - DESCRIPTION - "The initial revision of MIB module OTP-OS-MON-MIB." - ::= { otpModules 4 } - -OTPCounterBasedGauge64 ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The CounterBasedGauge64 type represents a non-negative - integer, which may increase or decrease, but shall never - exceed a maximum value, nor fall below a minimum value. The - maximum value can not be greater than 2^64-1 - (18446744073709551615 decimal), and the minimum value can - - not be smaller than 0. The value of a CounterBasedGauge64 - has its maximum value whenever the information being modeled - is greater than or equal to its maximum value, and has its - minimum value whenever the information being modeled is - smaller than or equal to its minimum value. If the - information being modeled subsequently decreases below - (increases above) the maximum (minimum) value, the - CounterBasedGauge64 also decreases (increases). - - Note that this TC is not strictly supported in SMIv2, - because the 'always increasing' and 'counter wrap' semantics - associated with the Counter64 base type are not preserved. - It is possible that management applications which rely - solely upon the (Counter64) ASN.1 tag to determine object - semantics will mistakenly operate upon objects of this type - as they would for Counter64 objects. - - This textual convention represents a limited and short-term - solution, and may be deprecated as a long term solution is - defined and deployed to replace it." - SYNTAX Counter64 - -otpOsMonMIB OBJECT IDENTIFIER ::= { otpApplications 2 } -otpOsMonMIBConformance - OBJECT IDENTIFIER ::= { otpOsMonMIB 1 } -otpOsMonMIBObjects - OBJECT IDENTIFIER ::= { otpOsMonMIB 2 } -otpOsMonMIBAlarms - OBJECT IDENTIFIER ::= { otpOsMonMIB 4 } -otpOsMonMIBAlarmsV2 - OBJECT IDENTIFIER ::= { otpOsMonMIBAlarms 0 } - - --- Datatypes - --- Managed Objects - -load OBJECT IDENTIFIER ::= { otpOsMonMIBObjects 1 } -disk OBJECT IDENTIFIER ::= { otpOsMonMIBObjects 2 } - -loadMemorySystemWatermark OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Threshold in percent of the total available system - memory, which specifies how much memory can be allocated - by the system before an alarm is sent." - ::= { load 1 } - -loadMemoryErlProcWatermark OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Threshold in percent of the total available system - memory, which specifies how much memory can be allocated - by one Erlang process before an alarm is sent." - ::= { load 2 } - -loadTable OBJECT-TYPE - SYNTAX SEQUENCE OF LoadEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table with load and memory information - for each node." - ::= { load 3 } - -loadEntry OBJECT-TYPE - SYNTAX LoadEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A conceptual row in the loadTable." - INDEX { loadErlNodeName } - ::= { loadTable 1 } - -LoadEntry ::= SEQUENCE { - loadErlNodeName DisplayString, - loadSystemTotalMemory Gauge32, - loadSystemUsedMemory Gauge32, - loadLargestErlProcess DisplayString, - loadLargestErlProcessUsedMemory Gauge32, - loadCpuLoad Integer32, - loadCpuLoad5 Integer32, - loadCpuLoad15 Integer32, - loadOsWordsize Unsigned32, - loadSystemTotalMemory64 OTPCounterBasedGauge64, - loadSystemUsedMemory64 OTPCounterBasedGauge64, - loadLargestErlProcessUsedMemory64 OTPCounterBasedGauge64 - } - -loadErlNodeName OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The name of the erlang node, e.g. erlnode@host1." - ::= { loadEntry 1 } - -loadSystemTotalMemory OBJECT-TYPE - SYNTAX Gauge32 - UNITS "bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of total memory in the system." - ::= { loadEntry 2 } - -loadSystemUsedMemory OBJECT-TYPE - SYNTAX Gauge32 - UNITS "bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of used memory." - ::= { loadEntry 3 } - -loadLargestErlProcess OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The process identifier (Pid) of the largest Erlang - process." - ::= { loadEntry 4 } - -loadLargestErlProcessUsedMemory OBJECT-TYPE - SYNTAX Gauge32 - UNITS "bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of memory used by the largest Erlang - process." - ::= { loadEntry 5 } - -loadCpuLoad OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The average load the last minute in percent of the CPU - where the Erlang node runs." - ::= { loadEntry 6 } - -loadCpuLoad5 OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The average load the last 5 minutes in percent of the CPU - where the Erlang node runs." - ::= { loadEntry 7} - -loadCpuLoad15 OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The average load the last 15 minutes in percent of the CPU - where the Erlang node runs." - ::= { loadEntry 8} - -loadOsWordsize OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The wordsize of the operating operating system." - ::= { loadEntry 9 } - -loadSystemTotalMemory64 OBJECT-TYPE - SYNTAX OTPCounterBasedGauge64 - UNITS "bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of total memory in the system for 64-bit operating system." - ::= { loadEntry 10 } - -loadSystemUsedMemory64 OBJECT-TYPE - SYNTAX OTPCounterBasedGauge64 - UNITS "bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of used memory for 64-bit operating system." - ::= { loadEntry 11 } - -loadLargestErlProcessUsedMemory64 OBJECT-TYPE - SYNTAX OTPCounterBasedGauge64 - UNITS "bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of memory used by the largest Erlang - process for 64-bit operating system.." - ::= { loadEntry 12 } - -diskAlmostFullThreshold OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Threshold in percent of the available disk space, - which specifies how much disk space can be used by - a disk or partition before an alarm is sent." - ::= { disk 1 } - -diskTable OBJECT-TYPE - SYNTAX SEQUENCE OF DiskEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table with all local disks or partitions on each - node." - ::= { disk 2 } - -diskEntry OBJECT-TYPE - SYNTAX DiskEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A conceptual row in the diskTable." - INDEX { erlNodeId, diskId } - ::= { diskTable 1 } - -DiskEntry ::= SEQUENCE { - diskId Integer32, - diskDescr DisplayString, - diskKBytes Gauge32, - diskCapacity Integer32 - } - -diskId OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An integer that uniquely identifies the disk - or partition." - ::= { diskEntry 1 } - -diskDescr OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A string that identifies the disk or partition." - ::= { diskEntry 2 } - -diskKBytes OBJECT-TYPE - SYNTAX Gauge32 - UNITS "kbytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of total disk/partition space. " - ::= { diskEntry 3 } - -diskCapacity OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "How much of the disk's/partition's total capacity has - been used, in percent." - ::= { diskEntry 4 } - - --- conformance information - -otpOsMonMIBCompliances - OBJECT IDENTIFIER ::= { otpOsMonMIBConformance 1 } -otpOsMonMIBGroups - OBJECT IDENTIFIER ::= { otpOsMonMIBConformance 2 } - - --- compliance statements - -otpOsMonBasicCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMPv2 entities which - implement the OTP-OS-MON-MIB." - MODULE -- this module - GROUP loadGroup - DESCRIPTION - "This group is mandatory for systems implementing the - load supervison functionality." - GROUP loadAlarmsGroup - DESCRIPTION - "This group is optional for systems implementing the - load supervison functionality." - GROUP diskGroup - DESCRIPTION - "This group is mandatory for system implementing the - disk supervison functionality." - GROUP diskAlarmsGroup - DESCRIPTION - "This group is optional for systems implementing the - disk supervison functionality." - ::= { otpOsMonMIBCompliances 1 } - - --- units of conformance - -loadGroup OBJECT-GROUP - OBJECTS { loadMemorySystemWatermark, - loadMemoryErlProcWatermark, - loadSystemTotalMemory, - loadSystemUsedMemory, - loadLargestErlProcess, - loadLargestErlProcessUsedMemory, - loadCpuLoad, - loadCpuLoad5, - loadCpuLoad15, - loadOsWordsize, - loadSystemTotalMemory64, - loadSystemUsedMemory64, - loadLargestErlProcessUsedMemory64} - STATUS current - DESCRIPTION - "A collection of objects providing basic instrumentation - of the load of the OTP system." - ::= { otpOsMonMIBGroups 1 } - -diskGroup OBJECT-GROUP - OBJECTS { diskAlmostFullThreshold, - diskDescr, - diskKBytes, - diskCapacity } - STATUS current - DESCRIPTION - "A collection of objects providing basic instrumentation - of the disks in the OTP system." - ::= { otpOsMonMIBGroups 3 } - -END |