diff options
Diffstat (limited to 'lib/reltool/test/reltool_manual_gui_SUITE.erl')
| -rw-r--r-- | lib/reltool/test/reltool_manual_gui_SUITE.erl | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/lib/reltool/test/reltool_manual_gui_SUITE.erl b/lib/reltool/test/reltool_manual_gui_SUITE.erl new file mode 100644 index 0000000000..0dcc5cbf15 --- /dev/null +++ b/lib/reltool/test/reltool_manual_gui_SUITE.erl @@ -0,0 +1,266 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% + +-module(reltool_manual_gui_SUITE). + +-export([all/0, suite/0,groups/0,init_per_group/2,end_per_group/2, + init_per_suite/1, end_per_suite/1, + init_per_testcase/2, end_per_testcase/2]). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). +-include("reltool_test_lib.hrl"). + +%% Initialization functions. +init_per_suite(Config) -> + reltool_test_lib:wx_init_per_suite(Config). + +end_per_suite(Config) -> + reltool_test_lib:wx_end_per_suite(Config). + +init_per_testcase(Func,Config) -> + reltool_test_lib:init_per_testcase(Func,Config). +end_per_testcase(Func,Config) -> + reltool_test_lib:end_per_testcase(Func,Config). + +%% SUITE specification +suite() -> [{ct_hooks,[ts_install_cth]}]. + +all() -> + [config, depgraphs]. + +groups() -> + []. + +init_per_group(_GroupName, Config) -> + Config. + +end_per_group(_GroupName, Config) -> + Config. + + +%% The test cases + +%% Semi-automatic walkthrough of the GUI +config(Config) -> + DataDir = ?config(data_dir,Config), + PrivDir = ?config(priv_dir,Config), + {ok, SysPid} = ?msym({ok, _}, reltool:start([])), + link(SysPid), + + SimpleConfigFile = create_simple_config(PrivDir), + WarningConfigFile = create_warning_config(PrivDir,DataDir), + + break("there are no modules in the 'Included' and 'Excluded' columns, " + "and now warnings are displayed", + {"load configuration ~p",[SimpleConfigFile]}), + break("kernel, stdlib and sasl are included and all other are excluded", + "undo"), + break("we are back to default - no included and no excluded applications", + "undo again"), + break("kernel, stdlib and sasl are included and all other are excluded", + {"load configuration ~p", + [WarningConfigFile]}), + break("a warning is displayed in the warning list", + "undo"), + break("no warning is displayed in the warning list", + "load same configuration again"), + break("application a is added in the 'Included' column and " + "one warning is displayed", + "reset configuration"), + break("we are back to default - no included and no excluded applications, " + "and no warnings", + "undo"), + break("a, kernel, stdlib and sasl are included and all other are excluded. " + "One warning should now exist through the rest of this test case", + "double click the warning"), + break("a popup window occurs displaying the warning text", + "close it with the 'Close' button"), + break("it disappears", + "open it again"), + break("the warning text can be marked, copied and pasted", + "close the popup with the close box on the top frame"), + break("it disappears", + "select application a from 'Included' column and click 'cross'-button " + "with to exclude it"), + break("application a is moved to 'Excluded' column", + "select application tools from 'Excluded' column and click " + "'tick'-button to include it"), + break("application tools is moved to 'Included' column", + "select application runtime_tools from 'Excluded' column and click " + "'tick'-button to include it"), + break("application runtime_tools is moved to 'Included' column", + "undo"), + + ExplicitConfig = filename:join(PrivDir,"explicit.config"), + break("application runtime_tools is moved back to 'Excluded' column", + {"save configuration as 'explicit' to ~p",[ExplicitConfig]}), + ExpectedExplicitConfig = + {sys,[{lib_dirs,[filename:join(DataDir,"faulty_app_file")]}, + {incl_cond,exclude}, + {app,a,[{incl_cond,exclude}]}, + {app,kernel,[{incl_cond,include}]}, + {app,sasl,[{incl_cond,include}]}, + {app,stdlib,[{incl_cond,include}]}, + {app,tools,[{incl_cond,include}]}]}, + check_config(ExpectedExplicitConfig,ExplicitConfig), + + break("The saved configuration file is checked and is ok.\n" + "Now go to the 'Libraries' tab and change the root directory to " + "some invalid directory."), + break("an error dialog occurs saying that there is no lib dir", + {"add library directory ~p", + [filename:join(DataDir,"dependencies")]}), + break("applications x, y and z are added to the 'Excluded' column in " + "'Applications' tab", + "go to the 'System settings' tab and set application inclusion policy " + "to 'derived'"), + break("a is excluded, kernel, stdlib, sasl and tools are included and " + "x, y and z are available in the 'Applications' tab", + "undo"), + break("all non included application are moved to the 'Excluded' column " + "and that 'Application inclusion policy' under 'System settings' " + "tab is set back to 'exclude'", + "undo again"), + break("applications x, y and z are in the 'Available' column", + "open application x, go to the 'Application settings' tab and set " + "'Application inclusion policy' to 'Use application specific config' " + "and 'include'. Close the window"), + break("application x is moved to the 'Included' column and z and y are moved " + "to the 'Derived' column in the system window", + "open application y"), + break("modules y1, y2 and y3 are in the 'Derived' column", + "go to 'Application dependencies' tab"), + break("application y is used by x, requires kernel and stdlib, and uses z", + "go to 'Module dependencies' tab"), + break("y is used by x2 and x3, and uses z1", + "got to 'Application settings' tab and select " + "'Source selection policy' 'Use selected version'"), + break("'Directories' frame becomes enabled (clickable)", + "select 'Module inclusion policy' 'Use application specific config' " + "and select 'app file + derived'"), + break("module y3 is moved to the 'Available' column in the 'Modules' tab", + "open module y1"), + break("module y1 is used by x2 and uses z1", + "go to the 'Code' tab and double click the line with call to z1:f()"), + break("new tab is opened with module z1", + "find something"), + break("it is found", + "goto some line"), + break("the cursor is moved to that line", + "click the 'Back' button"), + break("the cursor is moved back to the line of your previous 'find'", + "terminate the application window (but keep the module window)."), + + {ok,ServerPid} = reltool:get_server(SysPid), + unlink(SysPid), + break("the system window is still alive", + "terminate reltool by hitting 'Ctrl-q' (linux) or clicking the " + "close box on the top fram when system window is active"), + false = erlang:is_process_alive(SysPid), + false = erlang:is_process_alive(ServerPid), + + break("Check that both module window and system window are terminated"), + + ok. + + +depgraphs(Config) -> + PrivDir = ?config(priv_dir,Config), + SimpleConfigFile = create_simple_config(PrivDir), + {ok, SysPid} = ?msym({ok, _}, reltool:start([{config,SimpleConfigFile}])), + link(SysPid), + + break("Open the application dependency graph and \n\n" + "*move the complete graph by left clicking somewhere over it and drag\n" + "*move one node left clicking the node and drag\n" + "*lock node to position by holding down shift while releasing\n" + "*select several nodes with ctrl and left mouse button\n" + "*lock/unlock selected nodes with suitable buttons\n" + "*freeze\n" + "*reset\n" + "*left slider: push nodes apart\n" + "*right slider: pull nodes together\n" + "*middle slider: adjust length of links\n" + "*select node and delete\n"), + break("Open the module dependency graph and meditate over it... "), + + unlink(SysPid), + break("Terminate reltool from the file menu in the system window"), + false = erlang:is_process_alive(SysPid), + + break("Check that system window and graphs are terminated"), + + ok. + + + + +%%%----------------------------------------------------------------- +%%% Internal functions +break(CheckStr,DoStr) when is_list(CheckStr), is_list(DoStr) -> + Str = io_lib:format("Check that ~s.~n~nThen ~s.",[CheckStr,DoStr]), + break(Str); +break(Check,Do) -> + CheckStr = + case Check of + {CheckFormat,CheckArgs} -> io_lib:format(CheckFormat,CheckArgs); + _ -> Check + end, + DoStr = + case Do of + {DoFormat,DoArgs} -> io_lib:format(DoFormat,DoArgs); + _ -> Do + end, + break(CheckStr,DoStr). + +break(Str) -> + Count = + case get(count) of + undefined -> 1; + C -> C + end, + put(count,Count+1), + test_server:break("Step " ++ integer_to_list(Count) ++ ":\n" ++ Str). + +check_config(Expected,File) -> + {ok,[Config]} = file:consult(File), + ?m(Expected,Config). + +create_simple_config(PrivDir) -> + SimpleConfigFile = filename:join(PrivDir,"simple.config"), + SimpleConfig = {sys,[{incl_cond,exclude}, + {app,kernel,[{incl_cond,include}]}, + {app,stdlib,[{incl_cond,include}]}, + {app,sasl,[{incl_cond,include}]}]}, + ok=file:write_file(SimpleConfigFile,io_lib:format("~p.~n",[SimpleConfig])), + SimpleConfigFile. + +create_warning_config(PrivDir,DataDir) -> + WarningConfigFile = filename:join(PrivDir,"warning.config"), + FaultyAppFileDir = filename:join(DataDir,"faulty_app_file"), + WarningConfig = {sys,[{lib_dirs,[FaultyAppFileDir]}, + {incl_cond,exclude}, + {app,kernel,[{incl_cond,include}]}, + {app,sasl,[{incl_cond,include}]}, + {app,stdlib,[{incl_cond,include}]}, + {app,a,[{incl_cond,include}]} + ]}, + ok=file:write_file(WarningConfigFile,io_lib:format("~p.~n",[WarningConfig])), + WarningConfigFile. |