diff options
Diffstat (limited to 'lib/sasl/src/release_handler.erl')
| -rw-r--r-- | lib/sasl/src/release_handler.erl | 151 |
1 files changed, 90 insertions, 61 deletions
diff --git a/lib/sasl/src/release_handler.erl b/lib/sasl/src/release_handler.erl index b60aa847df..eb29787103 100644 --- a/lib/sasl/src/release_handler.erl +++ b/lib/sasl/src/release_handler.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1996-2010. All Rights Reserved. +%% Copyright Ericsson AB 1996-2011. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -890,6 +890,7 @@ do_check_install_release(RelDir, Vsn, Releases, Masters) -> end. do_install_release(#state{start_prg = StartPrg, + root = RootDir, rel_dir = RelDir, releases = Releases, masters = Masters, static_emulator = Static}, @@ -926,8 +927,8 @@ do_install_release(#state{start_prg = StartPrg, NReleases = set_status(Vsn, current, Releases), NReleases2 = set_status(Vsn,tmp_current,NReleases), write_releases(RelDir, NReleases2, Masters), - prepare_restart_new_emulator(StartPrg, RelDir, - Release, + prepare_restart_new_emulator(StartPrg, RootDir, + RelDir, Release, PermanentRelease, Masters), {restart_new_emulator, CurrentVsn, Descr}; @@ -997,7 +998,7 @@ do_make_services_permanent(PermanentVsn,Vsn, PermanentEVsn, EVsn) -> throw(Error4) end end. - + do_make_permanent(#state{releases = Releases, rel_dir = RelDir, unpurged = Unpurged, masters = Masters, @@ -1409,8 +1410,8 @@ prepare_restart_nt(#release{erts_vsn = EVsn, vsn = Vsn}, FutureServiceName = hd(string:tokens(atom_to_list(node()),"@")) ++ "_" ++ Vsn, CurrentService = case erlsrv:get_service(PermEVsn,CurrentServiceName) of - {error, Reason} -> - throw({error, Reason}); + {error, _} = Error1 -> + throw(Error1); CS -> CS end, @@ -1425,37 +1426,33 @@ prepare_restart_nt(#release{erts_vsn = EVsn, vsn = Vsn}, CurrentServiceName), case erlsrv:store_service(EVsn, FutureService) of - {error, Rison} -> - throw({error,Rison}); - _ -> + {error, _} = Error2 -> + throw(Error2); + _X -> erlsrv:disable_service(EVsn, FutureServiceName), ErlSrv = filename:nativename(erlsrv:erlsrv(EVsn)), - case heart:set_cmd(ErlSrv ++ " enable " ++ FutureServiceName ++ - " & " ++ ErlSrv ++ " start " ++ - FutureServiceName ++ - " & " ++ ErlSrv ++ " disable " ++ - FutureServiceName) of + StartDisabled = ErlSrv ++ " start_disabled " ++ FutureServiceName, + case heart:set_cmd(StartDisabled) of ok -> ok; - Error -> - throw({error, {'heart:set_cmd() error', Error}}) + Error3 -> + throw({error, {'heart:set_cmd() error', Error3}}) end end. - %%----------------------------------------------------------------- %% Set things up for restarting the new emulator. The actual %% restart is performed by calling init:reboot() higher up. %%----------------------------------------------------------------- -prepare_restart_new_emulator(StartPrg, RelDir, - Release, PRelease, - Masters) -> +prepare_restart_new_emulator(StartPrg, RootDir, RelDir, + Release, PRelease, Masters) -> #release{erts_vsn = EVsn, vsn = Vsn} = Release, Data = EVsn ++ " " ++ Vsn, DataFile = write_new_start_erl(Data, RelDir, Masters), %% Tell heart to use DataFile instead of start_erl.data case os:type() of {win32,nt} -> + write_ini_file(RootDir,EVsn,Masters), prepare_restart_nt(Release,PRelease,DataFile); {unix,_} -> StartP = check_start_prg(StartPrg, Masters), @@ -1832,50 +1829,10 @@ write_start(File, Data, false) -> end; write_start(File, Data, Masters) -> all_masters(Masters), - write_start_m(File, Data, Masters). + safe_write_file_m(File, Data, Masters). %%----------------------------------------------------------------- -%% Write the "start_erl.data" file at all master nodes. -%% 1. Save "start_erl.backup" at all nodes. -%% 2. Write the "start_erl.change" file at all nodes. -%% 3. Move "start_erl.change" to "start_erl.data". -%% 4. Remove "start_erl.backup" at all nodes. -%% -%% If one of the steps above fails, all steps is recovered from -%% (as long as possible), except for 4 which is allowed to fail. -%%----------------------------------------------------------------- -write_start_m(File, Data, Masters) -> - Dir = filename:dirname(File), - Backup = filename:join(Dir, "start_erl.backup"), - Change = filename:join(Dir, "start_erl.change"), - case at_all_masters(Masters, ?MODULE, do_copy_files, - [File, [Backup]]) of - ok -> - case at_all_masters(Masters, ?MODULE, do_write_file, - [Change, Data]) of - ok -> - case at_all_masters(Masters, file, rename, - [Change, File]) of - ok -> - remove_files(all, [Backup, Change], Masters), - ok; - {error, {Master, R}} -> - takewhile(Master, Masters, file, rename, - [Backup, File]), - remove_files(all, [Backup, Change], Masters), - throw({error, {Master, R, move_start_erl}}) - end; - {error, {Master, R}} -> - remove_files(all, [Backup, Change], Masters), - throw({error, {Master, R, write_start_erl}}) - end; - {error, {Master, R}} -> - remove_files(Master, [Backup], Masters), - throw({error, {Master, R, backup_start_erl}}) - end. - -%%----------------------------------------------------------------- %% Copy the "start.boot" and "sys.config" from SrcDir to DestDir at all %% master nodes. %% 1. Save DestDir/"start.backup" and DestDir/"sys.backup" at all nodes. @@ -1917,3 +1874,75 @@ set_static_files(SrcDir, DestDir, Masters) -> remove_files(Master, [BackupBoot, BackupConf], Masters), throw({error, {Master, R, backup_start_config}}) end. + +%%----------------------------------------------------------------- +%% Write erl.ini +%% Writes the erl.ini file used by erl.exe when (re)starting the erlang node. +%% At first installation, this is done by Install.exe, which means that if +%% the format of this file for some reason is changed, then Install.c must +%% also be updated (and probably some other c-files which read erl.ini) +%%----------------------------------------------------------------- +write_ini_file(RootDir,EVsn,Masters) -> + BinDir = filename:join([RootDir,"erts-"++EVsn,"bin"]), + Str0 = io_lib:format("[erlang]~n" + "Bindir=~s~n" + "Progname=erl~n" + "Rootdir=~s~n", + [filename:nativename(BinDir), + filename:nativename(RootDir)]), + Str = re:replace(Str0,"\\\\","\\\\\\\\",[{return,list},global]), + IniFile = filename:join(BinDir,"erl.ini"), + do_write_ini_file(IniFile,Str,Masters). + +do_write_ini_file(File,Data,false) -> + case do_write_file(File, Data) of + ok -> ok; + Error -> throw(Error) + end; +do_write_ini_file(File,Data,Masters) -> + all_masters(Masters), + safe_write_file_m(File, Data, Masters). + + +%%----------------------------------------------------------------- +%% Write the given file at all master nodes. +%% 1. Save <File>.backup at all nodes. +%% 2. Write <File>.change at all nodes. +%% 3. Move <File>.change to <File> +%% 4. Remove <File>.backup at all nodes. +%% +%% If one of the steps above fails, all steps are recovered from +%% (as long as possible), except for 4 which is allowed to fail. +%%----------------------------------------------------------------- +safe_write_file_m(File, Data, Masters) -> + Backup = File ++ ".backup", + Change = File ++ ".change", + case at_all_masters(Masters, ?MODULE, do_copy_files, + [File, [Backup]]) of + ok -> + case at_all_masters(Masters, ?MODULE, do_write_file, + [Change, Data]) of + ok -> + case at_all_masters(Masters, file, rename, + [Change, File]) of + ok -> + remove_files(all, [Backup, Change], Masters), + ok; + {error, {Master, R}} -> + takewhile(Master, Masters, file, rename, + [Backup, File]), + remove_files(all, [Backup, Change], Masters), + throw({error, {Master, R, rename, + filename:basename(Change), + filename:basename(File)}}) + end; + {error, {Master, R}} -> + remove_files(all, [Backup, Change], Masters), + throw({error, {Master, R, write, filename:basename(Change)}}) + end; + {error, {Master, R}} -> + remove_files(Master, [Backup], Masters), + throw({error, {Master, R, backup, + filename:basename(File), + filename:basename(Backup)}}) + end. |