aboutsummaryrefslogtreecommitdiffstats
path: root/lib
diff options
context:
space:
mode:
Diffstat (limited to 'lib')
-rw-r--r--lib/snmp/test/test-mibs/RMON-MIB.mib7782
1 files changed, 3957 insertions, 3825 deletions
diff --git a/lib/snmp/test/test-mibs/RMON-MIB.mib b/lib/snmp/test/test-mibs/RMON-MIB.mib
index 0824dbde1d..fa5bc82f4a 100644
--- a/lib/snmp/test/test-mibs/RMON-MIB.mib
+++ b/lib/snmp/test/test-mibs/RMON-MIB.mib
@@ -1,3826 +1,3958 @@
- RMON-MIB DEFINITIONS ::= BEGIN
-
- IMPORTS
- Counter FROM RFC1155-SMI
- mib-2,DisplayString FROM RFC1213-MIB
- OBJECT-TYPE FROM RFC-1212
- TRAP-TYPE FROM RFC-1215;
-
- -- Remote Network Monitoring MIB
-
- rmon OBJECT IDENTIFIER ::= { mib-2 16 }
-
-
- -- textual conventions
-
- OwnerString ::= DisplayString
- -- This data type is used to model an administratively
- -- assigned name of the owner of a resource. This
- -- information is taken from the NVT ASCII character
- -- set. It is suggested that this name contain one or
-
-
- -- more of the following: IP address, management station
- -- name, network manager's name, location, or phone
- -- number.
- -- In some cases the agent itself will be the owner of
- -- an entry. In these cases, this string shall be set
- -- to a string starting with 'monitor'.
- --
- -- SNMP access control is articulated entirely in terms
- -- of the contents of MIB views; access to a particular
- -- SNMP object instance depends only upon its presence
- -- or absence in a particular MIB view and never upon
- -- its value or the value of related object instances.
- -- Thus, objects of this type afford resolution of
- -- resource contention only among cooperating managers;
- -- they realize no access control function with respect
- -- to uncooperative parties.
- --
- -- By convention, objects with this syntax are declared as
- -- having
- --
- -- SIZE (0..127)
-
- EntryStatus ::= INTEGER
- { valid(1),
- createRequest(2),
- underCreation(3),
- invalid(4)
- }
- -- The status of a table entry.
- --
- -- Setting this object to the value invalid(4) has the
- -- effect of invalidating the corresponding entry.
- -- That is, it effectively disassociates the mapping
- -- identified with said entry.
- -- It is an implementation-specific matter as to whether
- -- the agent removes an invalidated entry from the table.
- -- Accordingly, management stations must be prepared to
- -- receive tabular information from agents that
- -- corresponds to entries currently not in use. Proper
- -- interpretation of such entries requires examination
- -- of the relevant EntryStatus object.
- --
- -- An existing instance of this object cannot be set to
- -- createRequest(2). This object may only be set to
- -- createRequest(2) when this instance is created. When
- -- this object is created, the agent may wish to create
- -- supplemental object instances with default values
- -- to complete a conceptual row in this table. Because
-
-
- -- the creation of these default objects is entirely at
- -- the option of the agent, the manager must not assume
- -- that any will be created, but may make use of any that
- -- are created. Immediately after completing the create
- -- operation, the agent must set this object to
- -- underCreation(3).
- --
- -- When in the underCreation(3) state, an entry is
- -- allowed to exist in a possibly incomplete, possibly
- -- inconsistent state, usually to allow it to be
- -- modified in mutiple PDUs. When in this state, an
- -- entry is not fully active. Entries shall exist in
- -- the underCreation(3) state until the management
- -- station is finished configuring the entry and sets
- -- this object to valid(1) or aborts, setting this
- -- object to invalid(4). If the agent determines that
- -- an entry has been in the underCreation(3) state for
- -- an abnormally long time, it may decide that the
- -- management station has crashed. If the agent makes
- -- this decision, it may set this object to invalid(4)
- -- to reclaim the entry. A prudent agent will
- -- understand that the management station may need to
- -- wait for human input and will allow for that
- -- possibility in its determination of this abnormally
- -- long period.
- --
- -- An entry in the valid(1) state is fully configured and
- -- consistent and fully represents the configuration or
- -- operation such a row is intended to represent. For
- -- example, it could be a statistical function that is
- -- configured and active, or a filter that is available
- -- in the list of filters processed by the packet capture
- -- process.
- --
- -- A manager is restricted to changing the state of an
- -- entry in the following ways:
- --
- -- create under
- -- To: valid Request Creation invalid
- -- From:
- -- valid OK NO OK OK
- -- createRequest N/A N/A N/A N/A
- -- underCreation OK NO OK OK
- -- invalid NO NO NO OK
- -- nonExistent NO OK NO OK
- --
- -- In the table above, it is not applicable to move the
- -- state from the createRequest state to any other
-
-
- -- state because the manager will never find the
- -- variable in that state. The nonExistent state is
- -- not a value of the enumeration, rather it means that
- -- the entryStatus variable does not exist at all.
- --
- -- An agent may allow an entryStatus variable to change
- -- state in additional ways, so long as the semantics
- -- of the states are followed. This allowance is made
- -- to ease the implementation of the agent and is made
- -- despite the fact that managers should never
- -- excercise these additional state transitions.
-
-
- statistics OBJECT IDENTIFIER ::= { rmon 1 }
- history OBJECT IDENTIFIER ::= { rmon 2 }
- alarm OBJECT IDENTIFIER ::= { rmon 3 }
- hosts OBJECT IDENTIFIER ::= { rmon 4 }
- hostTopN OBJECT IDENTIFIER ::= { rmon 5 }
- matrix OBJECT IDENTIFIER ::= { rmon 6 }
- filter OBJECT IDENTIFIER ::= { rmon 7 }
- capture OBJECT IDENTIFIER ::= { rmon 8 }
- event OBJECT IDENTIFIER ::= { rmon 9 }
-
-
- -- The Ethernet Statistics Group
- --
- -- Implementation of the Ethernet Statistics group is
- -- optional.
- --
- -- The ethernet statistics group contains statistics
- -- measured by the probe for each monitored interface on
- -- this device. These statistics take the form of free
- -- running counters that start from zero when a valid entry
- -- is created.
- --
- -- This group currently has statistics defined only for
- -- Ethernet interfaces. Each etherStatsEntry contains
- -- statistics for one Ethernet interface. The probe must
- -- create one etherStats entry for each monitored Ethernet
- -- interface on the device.
-
- etherStatsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EtherStatsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of Ethernet statistics entries."
- ::= { statistics 1 }
-
-
- etherStatsEntry OBJECT-TYPE
- SYNTAX EtherStatsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics kept for a particular
- Ethernet interface. As an example, an instance of the
- etherStatsPkts object might be named etherStatsPkts.1"
- INDEX { etherStatsIndex }
- ::= { etherStatsTable 1 }
-
- EtherStatsEntry ::= SEQUENCE {
- etherStatsIndex INTEGER (1..65535),
- etherStatsDataSource OBJECT IDENTIFIER,
- etherStatsDropEvents Counter,
- etherStatsOctets Counter,
- etherStatsPkts Counter,
- etherStatsBroadcastPkts Counter,
- etherStatsMulticastPkts Counter,
- etherStatsCRCAlignErrors Counter,
- etherStatsUndersizePkts Counter,
- etherStatsOversizePkts Counter,
- etherStatsFragments Counter,
- etherStatsJabbers Counter,
- etherStatsCollisions Counter,
- etherStatsPkts64Octets Counter,
- etherStatsPkts65to127Octets Counter,
- etherStatsPkts128to255Octets Counter,
- etherStatsPkts256to511Octets Counter,
- etherStatsPkts512to1023Octets Counter,
- etherStatsPkts1024to1518Octets Counter,
- etherStatsOwner OwnerString,
- etherStatsStatus EntryStatus
- }
-
- etherStatsIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of this object uniquely identifies this
- etherStats entry."
- ::= { etherStatsEntry 1 }
-
- etherStatsDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "This object identifies the source of the data that
- this etherStats entry is configured to analyze. This
- source can be any ethernet interface on this device.
- In order to identify a particular interface, this
- object shall identify the instance of the ifIndex
- object, defined in RFC 1213 and RFC 1573 [4,6], for
- the desired interface. For example, if an entry
- were to receive data from interface #1, this object
- would be set to ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
- identified interface.
-
- An agent may or may not be able to tell if
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- etherStatsStatus object is equal to valid(1)."
- ::= { etherStatsEntry 2 }
-
- etherStatsDropEvents OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of events in which packets
- were dropped by the probe due to lack of resources.
- Note that this number is not necessarily the number of
- packets dropped; it is just the number of times this
- condition has been detected."
- ::= { etherStatsEntry 3 }
-
- etherStatsOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of octets of data (including
- those in bad packets) received on the
- network (excluding framing bits but including
-
-
- FCS octets).
-
- This object can be used as a reasonable estimate of
- ethernet utilization. If greater precision is
- desired, the etherStatsPkts and etherStatsOctets
- objects should be sampled before and after a common
- interval. The differences in the sampled values are
- Pkts and Octets, respectively, and the number of
- seconds in the interval is Interval. These values
- are used to calculate the Utilization as follows:
-
- Pkts * (9.6 + 6.4) + (Octets * .8)
- Utilization = -------------------------------------
- Interval * 10,000
-
- The result of this equation is the value Utilization
- which is the percent utilization of the ethernet
- segment on a scale of 0 to 100 percent."
- ::= { etherStatsEntry 4 }
-
- etherStatsPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad packets,
- broadcast packets, and multicast packets) received."
- ::= { etherStatsEntry 5 }
-
- etherStatsBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of good packets received that were
- directed to the broadcast address. Note that this
- does not include multicast packets."
- ::= { etherStatsEntry 6 }
-
- etherStatsMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of good packets received that were
- directed to a multicast address. Note that this
- number does not include packets directed to the
- broadcast address."
-
-
- ::= { etherStatsEntry 7 }
-
- etherStatsCRCAlignErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that
- had a length (excluding framing bits, but
- including FCS octets) of between 64 and 1518
- octets, inclusive, but but had either a bad
- Frame Check Sequence (FCS) with an integral
- number of octets (FCS Error) or a bad FCS with
- a non-integral number of octets (Alignment Error)."
- ::= { etherStatsEntry 8 }
-
- etherStatsUndersizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were
- less than 64 octets long (excluding framing bits,
- but including FCS octets) and were otherwise well
- formed."
- ::= { etherStatsEntry 9 }
-
- etherStatsOversizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were
- longer than 1518 octets (excluding framing bits,
- but including FCS octets) and were otherwise
- well formed."
- ::= { etherStatsEntry 10 }
-
- etherStatsFragments OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were less
- than 64 octets in length (excluding framing bits but
- including FCS octets) and had either a bad Frame
- Check Sequence (FCS) with an integral number of
- octets (FCS Error) or a bad FCS with a non-integral
-
-
- number of octets (Alignment Error).
-
- Note that it is entirely normal for
- etherStatsFragments to increment. This is because
- it counts both runts (which are normal occurrences
- due to collisions) and noise hits."
- ::= { etherStatsEntry 11 }
-
- etherStatsJabbers OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were
- longer than 1518 octets (excluding framing bits,
- but including FCS octets), and had either a bad
- Frame Check Sequence (FCS) with an integral number
- of octets (FCS Error) or a bad FCS with a
- non-integral number of octets (Alignment Error).
-
- Note that this definition of jabber is different
- than the definition in IEEE-802.3 section 8.2.1.5
- (10BASE5) and section 10.3.1.4 (10BASE2). These
- documents define jabber as the condition where any
- packet exceeds 20 ms. The allowed range to detect
- jabber is between 20 ms and 150 ms."
- ::= { etherStatsEntry 12 }
-
- etherStatsCollisions OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The best estimate of the total number of collisions
- on this Ethernet segment.
-
- The value returned will depend on the location of
- the RMON probe. Section 8.2.1.3 (10BASE-5) and
- section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
- states that a station must detect a collision, in
- the receive mode, if three or more stations are
- transmitting simultaneously. A repeater port must
- detect a collision when two or more stations are
- transmitting simultaneously. Thus a probe placed on
- a repeater port could record more collisions than a
- probe connected to a station on the same segment
- would.
-
-
-
- Probe location plays a much smaller role when
- considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
- standard 802.3 defines a collision as the
- simultaneous presence of signals on the DO and RD
- circuits (transmitting and receiving at the same
- time). A 10BASE-T station can only detect
- collisions when it is transmitting. Thus probes
- placed on a station and a repeater, should report
- the same number of collisions.
-
- Note also that an RMON probe inside a repeater
- should ideally report collisions between the
- repeater and one or more other hosts (transmit
- collisions as defined by IEEE 802.3k) plus receiver
- collisions observed on any coax segments to which
- the repeater is connected."
- ::= { etherStatsEntry 13 }
-
- etherStatsPkts64Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were 64 octets in length
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 14 }
-
- etherStatsPkts65to127Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 65 and 127 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 15 }
-
- etherStatsPkts128to255Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 128 and 255 octets in length inclusive
- (excluding framing bits but including FCS octets)."
-
-
- ::= { etherStatsEntry 16 }
-
- etherStatsPkts256to511Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 256 and 511 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 17 }
-
- etherStatsPkts512to1023Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 512 and 1023 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 18 }
-
- etherStatsPkts1024to1518Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 1024 and 1518 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 19 }
-
- etherStatsOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { etherStatsEntry 20 }
-
- etherStatsStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "The status of this etherStats entry."
- ::= { etherStatsEntry 21 }
-
-
- -- The History Control Group
-
- -- Implementation of the History Control group is optional.
- --
- -- The history control group controls the periodic statistical
- -- sampling of data from various types of networks. The
- -- historyControlTable stores configuration entries that each
- -- define an interface, polling period, and other parameters.
- -- Once samples are taken, their data is stored in an entry
- -- in a media-specific table. Each such entry defines one
- -- sample, and is associated with the historyControlEntry that
- -- caused the sample to be taken. Each counter in the
- -- etherHistoryEntry counts the same event as its
- -- similarly-named counterpart in the etherStatsEntry,
- -- except that each value here is a cumulative sum during a
- -- sampling period.
- --
- -- If the probe keeps track of the time of day, it should
- -- start the first sample of the history at a time such that
- -- when the next hour of the day begins, a sample is
- -- started at that instant. This tends to make more
- -- user-friendly reports, and enables comparison of reports
- -- from different probes that have relatively accurate time
- -- of day.
- --
- -- The probe is encouraged to add two history control entries
- -- per monitored interface upon initialization that describe
- -- a short term and a long term polling period. Suggested
- -- parameters are 30 seconds for the short term polling period
- -- and 30 minutes for the long term period.
-
- historyControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HistoryControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of history control entries."
- ::= { history 1 }
-
- historyControlEntry OBJECT-TYPE
- SYNTAX HistoryControlEntry
- ACCESS not-accessible
- STATUS mandatory
-
-
- DESCRIPTION
- "A list of parameters that set up a periodic sampling
- of statistics. As an example, an instance of the
- historyControlInterval object might be named
- historyControlInterval.2"
- INDEX { historyControlIndex }
- ::= { historyControlTable 1 }
-
- HistoryControlEntry ::= SEQUENCE {
- historyControlIndex INTEGER (1..65535),
- historyControlDataSource OBJECT IDENTIFIER,
- historyControlBucketsRequested INTEGER (1..65535),
- historyControlBucketsGranted INTEGER (1..65535),
- historyControlInterval INTEGER (1..3600),
- historyControlOwner OwnerString,
- historyControlStatus EntryStatus
- }
-
- historyControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- historyControl table. Each such entry defines a
- set of samples at a particular interval for an
- interface on the device."
- ::= { historyControlEntry 1 }
-
- historyControlDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the source of the data for
- which historical data was collected and
- placed in a media-specific table on behalf of this
- historyControlEntry. This source can be any
- interface on this device. In order to identify
- a particular interface, this object shall identify
- the instance of the ifIndex object, defined
- in RFC 1213 and RFC 1573 [4,6], for the desired
- interface. For example, if an entry were to receive
- data from interface #1, this object would be set
- to ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
-
-
- identified interface.
-
- An agent may or may not be able to tell if fundamental
- changes to the media of the interface have occurred
- and necessitate an invalidation of this entry. For
- example, a hot-pluggable ethernet card could be
- pulled out and replaced by a token-ring card. In
- such a case, if the agent has such knowledge of the
- change, it is recommended that it invalidate this
- entry.
-
- This object may not be modified if the associated
- historyControlStatus object is equal to valid(1)."
- ::= { historyControlEntry 2 }
-
- historyControlBucketsRequested OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The requested number of discrete time intervals
- over which data is to be saved in the part of the
- media-specific table associated with this
- historyControlEntry.
-
- When this object is created or modified, the probe
- should set historyControlBucketsGranted as closely to
- this object as is possible for the particular probe
- implementation and available resources."
- DEFVAL { 50 }
- ::= { historyControlEntry 3 }
-
- historyControlBucketsGranted OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of discrete sampling intervals
- over which data shall be saved in the part of
- the media-specific table associated with this
- historyControlEntry.
-
- When the associated historyControlBucketsRequested
- object is created or modified, the probe
- should set this object as closely to the requested
- value as is possible for the particular
- probe implementation and available resources. The
- probe must not lower this value except as a result
-
-
- of a modification to the associated
- historyControlBucketsRequested object.
-
- There will be times when the actual number of
- buckets associated with this entry is less than
- the value of this object. In this case, at the
- end of each sampling interval, a new bucket will
- be added to the media-specific table.
-
- When the number of buckets reaches the value of
- this object and a new bucket is to be added to the
- media-specific table, the oldest bucket associated
- with this historyControlEntry shall be deleted by
- the agent so that the new bucket can be added.
-
- When the value of this object changes to a value less
- than the current value, entries are deleted
- from the media-specific table associated with this
- historyControlEntry. Enough of the oldest of these
- entries shall be deleted by the agent so that their
- number remains less than or equal to the new value of
- this object.
-
- When the value of this object changes to a value
- greater than the current value, the number of
- associated media- specific entries may be allowed to
- grow."
- ::= { historyControlEntry 4 }
-
- historyControlInterval OBJECT-TYPE
- SYNTAX INTEGER (1..3600)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The interval in seconds over which the data is
- sampled for each bucket in the part of the
- media-specific table associated with this
- historyControlEntry. This interval can
- be set to any number of seconds between 1 and
- 3600 (1 hour).
-
- Because the counters in a bucket may overflow at their
- maximum value with no indication, a prudent manager
- will take into account the possibility of overflow
- in any of the associated counters. It is important
- to consider the minimum time in which any counter
- could overflow on a particular media type and set
- the historyControlInterval object to a value less
-
-
- than this interval. This is typically most
- important for the 'octets' counter in any
- media-specific table. For example, on an Ethernet
- network, the etherHistoryOctets counter could
- overflow in about one hour at the Ethernet's maximum
- utilization.
-
- This object may not be modified if the associated
- historyControlStatus object is equal to valid(1)."
- DEFVAL { 1800 }
- ::= { historyControlEntry 5 }
-
- historyControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { historyControlEntry 6 }
-
- historyControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this historyControl entry.
-
- Each instance of the media-specific table associated
- with this historyControlEntry will be deleted by the
- agent if this historyControlEntry is not equal to
- valid(1)."
- ::= { historyControlEntry 7 }
-
-
- -- The Ethernet History Group
-
- -- Implementation of the Ethernet History group is optional.
- --
- -- The Ethernet History group records periodic
- -- statistical samples from a network and stores them
- -- for later retrieval. Once samples are taken, their
- -- data is stored in an entry in a media-specific
- -- table. Each such entry defines one sample, and is
- -- associated with the historyControlEntry that caused
- -- the sample to be taken. This group defines the
- -- etherHistoryTable, for Ethernet networks.
- --
-
-
- etherHistoryTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EtherHistoryEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of Ethernet history entries."
- ::= { history 2 }
-
- etherHistoryEntry OBJECT-TYPE
- SYNTAX EtherHistoryEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An historical sample of Ethernet statistics on a
- particular Ethernet interface. This sample is
- associated with the historyControlEntry which set up
- the parameters for a regular collection of these
- samples. As an example, an instance of the
- etherHistoryPkts object might be named
- etherHistoryPkts.2.89"
- INDEX { etherHistoryIndex , etherHistorySampleIndex }
- ::= { etherHistoryTable 1 }
-
- EtherHistoryEntry ::= SEQUENCE {
- etherHistoryIndex INTEGER (1..65535),
- etherHistorySampleIndex INTEGER (1..2147483647),
- etherHistoryIntervalStart TimeTicks,
- etherHistoryDropEvents Counter,
- etherHistoryOctets Counter,
- etherHistoryPkts Counter,
- etherHistoryBroadcastPkts Counter,
- etherHistoryMulticastPkts Counter,
- etherHistoryCRCAlignErrors Counter,
- etherHistoryUndersizePkts Counter,
- etherHistoryOversizePkts Counter,
- etherHistoryFragments Counter,
- etherHistoryJabbers Counter,
- etherHistoryCollisions Counter,
- etherHistoryUtilization INTEGER (0..10000)
- }
-
- etherHistoryIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The history of which this entry is a part. The
- history identified by a particular value of this
-
-
- index is the same history as identified
- by the same value of historyControlIndex."
- ::= { etherHistoryEntry 1 }
-
- etherHistorySampleIndex OBJECT-TYPE
- SYNTAX INTEGER (1..2147483647)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies the particular
- sample this entry represents among all samples
- associated with the same historyControlEntry.
- This index starts at 1 and increases by one
- as each new sample is taken."
- ::= { etherHistoryEntry 2 }
-
- etherHistoryIntervalStart OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime at the start of the interval
- over which this sample was measured. If the probe
- keeps track of the time of day, it should start
- the first sample of the history at a time such that
- when the next hour of the day begins, a sample is
- started at that instant. Note that following this
- rule may require the probe to delay collecting the
- first sample of the history, as each sample must be
- of the same interval. Also note that the sample which
- is currently being collected is not accessible in this
- table until the end of its interval."
- ::= { etherHistoryEntry 3 }
-
- etherHistoryDropEvents OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of events in which packets
- were dropped by the probe due to lack of resources
- during this sampling interval. Note that this number
- is not necessarily the number of packets dropped, it
- is just the number of times this condition has been
- detected."
- ::= { etherHistoryEntry 4 }
-
- etherHistoryOctets OBJECT-TYPE
-
-
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of octets of data (including
- those in bad packets) received on the
- network (excluding framing bits but including
- FCS octets)."
- ::= { etherHistoryEntry 5 }
-
- etherHistoryPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets (including bad packets)
- received during this sampling interval."
- ::= { etherHistoryEntry 6 }
-
- etherHistoryBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets received during this
- sampling interval that were directed to the
- broadcast address."
- ::= { etherHistoryEntry 7 }
-
- etherHistoryMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets received during this
- sampling interval that were directed to a
- multicast address. Note that this number does not
- include packets addressed to the broadcast address."
- ::= { etherHistoryEntry 8 }
-
- etherHistoryCRCAlignErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this sampling
- interval that had a length (excluding framing bits
- but including FCS octets) between 64 and 1518
-
-
- octets, inclusive, but had either a bad Frame Check
- Sequence (FCS) with an integral number of octets
- (FCS Error) or a bad FCS with a non-integral number
- of octets (Alignment Error)."
- ::= { etherHistoryEntry 9 }
-
- etherHistoryUndersizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this
- sampling interval that were less than 64 octets
- long (excluding framing bits but including FCS
- octets) and were otherwise well formed."
- ::= { etherHistoryEntry 10 }
-
- etherHistoryOversizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this
- sampling interval that were longer than 1518
- octets (excluding framing bits but including
- FCS octets) but were otherwise well formed."
- ::= { etherHistoryEntry 11 }
-
- etherHistoryFragments OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received during this
- sampling interval that were less than 64 octets in
- length (excluding framing bits but including FCS
- octets) had either a bad Frame Check Sequence (FCS)
- with an integral number of octets (FCS Error) or a bad
- FCS with a non-integral number of octets (Alignment
- Error).
-
- Note that it is entirely normal for
- etherHistoryFragments to increment. This is because
- it counts both runts (which are normal occurrences
- due to collisions) and noise hits."
- ::= { etherHistoryEntry 12 }
-
- etherHistoryJabbers OBJECT-TYPE
-
-
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this
- sampling interval that were longer than 1518 octets
- (excluding framing bits but including FCS octets),
- and had either a bad Frame Check Sequence (FCS)
- with an integral number of octets (FCS Error) or
- a bad FCS with a non-integral number of octets
- (Alignment Error).
-
- Note that this definition of jabber is different
- than the definition in IEEE-802.3 section 8.2.1.5
- (10BASE5) and section 10.3.1.4 (10BASE2). These
- documents define jabber as the condition where any
- packet exceeds 20 ms. The allowed range to detect
- jabber is between 20 ms and 150 ms."
- ::= { etherHistoryEntry 13 }
-
- etherHistoryCollisions OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The best estimate of the total number of collisions
- on this Ethernet segment during this sampling
- interval.
-
- The value returned will depend on the location of
- the RMON probe. Section 8.2.1.3 (10BASE-5) and
- section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
- states that a station must detect a collision, in
- the receive mode, if three or more stations are
- transmitting simultaneously. A repeater port must
- detect a collision when two or more stations are
- transmitting simultaneously. Thus a probe placed on
- a repeater port could record more collisions than a
- probe connected to a station on the same segment
- would.
-
- Probe location plays a much smaller role when
- considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
- standard 802.3 defines a collision as the
- simultaneous presence of signals on the DO and RD
- circuits (transmitting and receiving at the same
- time). A 10BASE-T station can only detect
- collisions when it is transmitting. Thus probes
-
-
- placed on a station and a repeater, should report
- the same number of collisions.
-
- Note also that an RMON probe inside a repeater
- should ideally report collisions between the
- repeater and one or more other hosts (transmit
- collisions as defined by IEEE 802.3k) plus receiver
- collisions observed on any coax segments to which
- the repeater is connected."
- ::= { etherHistoryEntry 14 }
-
- etherHistoryUtilization OBJECT-TYPE
- SYNTAX INTEGER (0..10000)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The best estimate of the mean physical layer
- network utilization on this interface during this
- sampling interval, in hundredths of a percent."
- ::= { etherHistoryEntry 15 }
-
-
- -- The Alarm Group
-
- -- Implementation of the Alarm group is optional.
- --
- -- The Alarm Group requires the implementation of the Event
- -- group.
- --
- -- The Alarm group periodically takes
- -- statistical samples from variables in the probe and
- -- compares them to thresholds that have been
- -- configured. The alarm table stores configuration
- -- entries that each define a variable, polling period,
- -- and threshold parameters. If a sample is found to
- -- cross the threshold values, an event is generated.
- -- Only variables that resolve to an ASN.1 primitive
- -- type of INTEGER (INTEGER, Counter, Gauge, or
- -- TimeTicks) may be monitored in this way.
- --
- -- This function has a hysteresis mechanism to limit
- -- the generation of events. This mechanism generates
- -- one event as a threshold is crossed in the
- -- appropriate direction. No more events are generated
- -- for that threshold until the opposite threshold is
- -- crossed.
- --
- -- In the case of a sampling a deltaValue, a probe may
-
-
- -- implement this mechanism with more precision if it
- -- takes a delta sample twice per period, each time
- -- comparing the sum of the latest two samples to the
- -- threshold. This allows the detection of threshold
- -- crossings that span the sampling boundary. Note
- -- that this does not require any special configuration
- -- of the threshold value. It is suggested that probes
- -- implement this more precise algorithm.
-
- alarmTable OBJECT-TYPE
- SYNTAX SEQUENCE OF AlarmEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of alarm entries."
- ::= { alarm 1 }
-
- alarmEntry OBJECT-TYPE
- SYNTAX AlarmEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of parameters that set up a periodic checking
- for alarm conditions. For example, an instance of the
- alarmValue object might be named alarmValue.8"
- INDEX { alarmIndex }
- ::= { alarmTable 1 }
-
- AlarmEntry ::= SEQUENCE {
- alarmIndex INTEGER (1..65535),
- alarmInterval INTEGER,
- alarmVariable OBJECT IDENTIFIER,
- alarmSampleType INTEGER,
- alarmValue INTEGER,
- alarmStartupAlarm INTEGER,
- alarmRisingThreshold INTEGER,
- alarmFallingThreshold INTEGER,
- alarmRisingEventIndex INTEGER (0..65535),
- alarmFallingEventIndex INTEGER (0..65535),
- alarmOwner OwnerString,
- alarmStatus EntryStatus
- }
-
- alarmIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
-
-
- "An index that uniquely identifies an entry in the
- alarm table. Each such entry defines a
- diagnostic sample at a particular interval
- for an object on the device."
- ::= { alarmEntry 1 }
-
- alarmInterval OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The interval in seconds over which the data is
- sampled and compared with the rising and falling
- thresholds. When setting this variable, care
- should be taken in the case of deltaValue
- sampling - the interval should be set short enough
- that the sampled variable is very unlikely to
- increase or decrease by more than 2^31 - 1 during
- a single sampling interval.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 2 }
-
- alarmVariable OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The object identifier of the particular variable to
- be sampled. Only variables that resolve to an ASN.1
- primitive type of INTEGER (INTEGER, Counter, Gauge,
- or TimeTicks) may be sampled.
-
- Because SNMP access control is articulated entirely
- in terms of the contents of MIB views, no access
- control mechanism exists that can restrict the value
- of this object to identify only those objects that
- exist in a particular MIB view. Because there is
- thus no acceptable means of restricting the read
- access that could be obtained through the alarm
- mechanism, the probe must only grant write access to
- this object in those views that have read access to
- all objects on the probe.
-
- During a set operation, if the supplied variable
- name is not available in the selected MIB view, a
- badValue error must be returned. If at any time the
-
-
- variable name of an established alarmEntry is no
- longer available in the selected MIB view, the probe
- must change the status of this alarmEntry to
- invalid(4).
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 3 }
-
- alarmSampleType OBJECT-TYPE
- SYNTAX INTEGER {
- absoluteValue(1),
- deltaValue(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The method of sampling the selected variable and
- calculating the value to be compared against the
- thresholds. If the value of this object is
- absoluteValue(1), the value of the selected variable
- will be compared directly with the thresholds at the
- end of the sampling interval. If the value of this
- object is deltaValue(2), the value of the selected
- variable at the last sample will be subtracted from
- the current value, and the difference compared with
- the thresholds.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 4 }
-
- alarmValue OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of the statistic during the last sampling
- period. For example, if the sample type is
- deltaValue, this value will be the difference
- between the samples at the beginning and end of the
- period. If the sample type is absoluteValue, this
- value will be the sampled value at the end of the
- period.
-
- This is the value that is compared with the rising and
- falling thresholds.
-
-
-
- The value during the current sampling period is not
- made available until the period is completed and will
- remain available until the next period completes."
- ::= { alarmEntry 5 }
-
- alarmStartupAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- risingAlarm(1),
- fallingAlarm(2),
- risingOrFallingAlarm(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The alarm that may be sent when this entry is first
- set to valid. If the first sample after this entry
- becomes valid is greater than or equal to the
- risingThreshold and alarmStartupAlarm is equal to
- risingAlarm(1) or risingOrFallingAlarm(3), then a
- single rising alarm will be generated. If the first
- sample after this entry becomes valid is less than
- or equal to the fallingThreshold and
- alarmStartupAlarm is equal to fallingAlarm(2) or
- risingOrFallingAlarm(3), then a single falling alarm
- will be generated.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 6 }
-
- alarmRisingThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold for the sampled statistic. When the
- current sampled value is greater than or equal to
- this threshold, and the value at the last sampling
- interval was less than this threshold, a single
- event will be generated. A single event will also
- be generated if the first sample after this entry
- becomes valid is greater than or equal to this
- threshold and the associated alarmStartupAlarm is
- equal to risingAlarm(1) or risingOrFallingAlarm(3).
-
- After a rising event is generated, another such event
- will not be generated until the sampled value
- falls below this threshold and reaches the
-
-
- alarmFallingThreshold.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 7 }
-
- alarmFallingThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold for the sampled statistic. When the
- current sampled value is less than or equal to this
- threshold, and the value at the last sampling
- interval was greater than this threshold, a single
- event will be generated. A single event will also
- be generated if the first sample after this entry
- becomes valid is less than or equal to this
- threshold and the associated alarmStartupAlarm is
- equal to fallingAlarm(2) or risingOrFallingAlarm(3).
-
- After a falling event is generated, another such event
- will not be generated until the sampled value
- rises above this threshold and reaches the
- alarmRisingThreshold.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 8 }
-
- alarmRisingEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The index of the eventEntry that is
- used when a rising threshold is crossed. The
- eventEntry identified by a particular value of
- this index is the same as identified by the same value
- of the eventIndex object. If there is no
- corresponding entry in the eventTable, then
- no association exists. In particular, if this value
- is zero, no associated event will be generated, as
- zero is not a valid event index.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 9 }
-
-
- alarmFallingEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The index of the eventEntry that is
- used when a falling threshold is crossed. The
- eventEntry identified by a particular value of
- this index is the same as identified by the same value
- of the eventIndex object. If there is no
- corresponding entry in the eventTable, then
- no association exists. In particular, if this value
- is zero, no associated event will be generated, as
- zero is not a valid event index.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 10 }
-
- alarmOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { alarmEntry 11 }
-
- alarmStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this alarm entry."
- ::= { alarmEntry 12 }
-
-
- -- The Host Group
-
- -- Implementation of the Host group is optional.
- --
- -- The host group discovers new hosts on the network by
- -- keeping a list of source and destination MAC Addresses seen
- -- in good packets. For each of these addresses, the host
- -- group keeps a set of statistics. The hostControlTable
- -- controls which interfaces this function is performed on,
- -- and contains some information about the process. On
- -- behalf of each hostControlEntry, data is collected on an
-
-
- -- interface and placed in both the hostTable and the
- -- hostTimeTable. If the monitoring device finds itself
- -- short of resources, it may delete entries as needed. It
- -- is suggested that the device delete the least recently
- -- used entries first.
-
- -- The hostTable contains entries for each address
- -- discovered on a particular interface. Each entry
- -- contains statistical data about that host. This table is
- -- indexed by the MAC address of the host, through which a
- -- random access may be achieved.
-
- -- The hostTimeTable contains data in the same format as the
- -- hostTable, and must contain the same set of hosts, but is
- -- indexed using hostTimeCreationOrder rather than
- -- hostAddress.
- -- The hostTimeCreationOrder is an integer which reflects
- -- the relative order in which a particular entry was
- -- discovered and thus inserted into the table. As this
- -- order, and thus the index, is among those entries
- -- currently in the table, the index for a particular entry
- -- may change if an (earlier) entry is deleted. Thus the
- -- association between hostTimeCreationOrder and
- -- hostTimeEntry may be broken at any time.
-
- -- The hostTimeTable has two important uses. The first is the
- -- fast download of this potentially large table. Because the
- -- index of this table runs from 1 to the size of the table,
- -- inclusive, its values are predictable. This allows very
- -- efficient packing of variables into SNMP PDU's and allows
- -- a table transfer to have multiple packets outstanding.
- -- These benefits increase transfer rates tremendously.
-
- -- The second use of the hostTimeTable is the efficient
- -- discovery by the management station of new entries added
- -- to the table. After the management station has downloaded
- -- the entire table, it knows that new entries will be added
- -- immediately after the end of the current table. It can
- -- thus detect new entries there and retrieve them easily.
-
- -- Because the association between hostTimeCreationOrder and
- -- hostTimeEntry may be broken at any time, the management
- -- station must monitor the related hostControlLastDeleteTime
- -- object. When the management station thus detects a
- -- deletion, it must assume that any such associations have
- --- been broken, and invalidate any it has stored locally.
- -- This includes restarting any download of the
- -- hostTimeTable that may have been in progress, as well as
-
-
- -- rediscovering the end of the hostTimeTable so that it may
- -- detect new entries. If the management station does not
- -- detect the broken association, it may continue to refer
- -- to a particular host by its creationOrder while
- -- unwittingly retrieving the data associated with another
- -- host entirely. If this happens while downloading the
- -- host table, the management station may fail to download
- -- all of the entries in the table.
-
- hostControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of host table control entries."
- ::= { hosts 1 }
-
- hostControlEntry OBJECT-TYPE
- SYNTAX HostControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of parameters that set up the discovery of
- hosts on a particular interface and the collection
- of statistics about these hosts. For example, an
- instance of the hostControlTableSize object might be
- named hostControlTableSize.1"
- INDEX { hostControlIndex }
- ::= { hostControlTable 1 }
-
- HostControlEntry ::= SEQUENCE {
- hostControlIndex INTEGER (1..65535),
- hostControlDataSource OBJECT IDENTIFIER,
- hostControlTableSize INTEGER,
- hostControlLastDeleteTime TimeTicks,
- hostControlOwner OwnerString,
- hostControlStatus EntryStatus
- }
-
- hostControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- hostControl table. Each such entry defines
- a function that discovers hosts on a particular
- interface and places statistics about them in the
-
-
- hostTable and the hostTimeTable on behalf of this
- hostControlEntry."
- ::= { hostControlEntry 1 }
-
- hostControlDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the source of the data for
- this instance of the host function. This source
- can be any interface on this device. In order
- to identify a particular interface, this object shall
- identify the instance of the ifIndex object, defined
- in RFC 1213 and RFC 1573 [4,6], for the desired
- interface. For example, if an entry were to receive
- data from interface #1, this object would be set to
- ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
- identified interface.
-
- An agent may or may not be able to tell if
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- hostControlStatus object is equal to valid(1)."
- ::= { hostControlEntry 2 }
-
- hostControlTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of hostEntries in the hostTable and the
- hostTimeTable associated with this hostControlEntry."
- ::= { hostControlEntry 3 }
-
- hostControlLastDeleteTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
-
-
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when the last entry
- was deleted from the portion of the hostTable
- associated with this hostControlEntry. If no
- deletions have occurred, this value shall be zero."
- ::= { hostControlEntry 4 }
-
- hostControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { hostControlEntry 5 }
-
- hostControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this hostControl entry.
-
- If this object is not equal to valid(1), all
- associated entries in the hostTable, hostTimeTable,
- and the hostTopNTable shall be deleted by the
- agent."
- ::= { hostControlEntry 6 }
-
- hostTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of host entries."
- ::= { hosts 2 }
-
- hostEntry OBJECT-TYPE
- SYNTAX HostEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for a particular host
- that has been discovered on an interface of this
- device. For example, an instance of the
- hostOutBroadcastPkts object might be named
- hostOutBroadcastPkts.1.6.8.0.32.27.3.176"
-
-
- INDEX { hostIndex, hostAddress }
- ::= { hostTable 1 }
-
- HostEntry ::= SEQUENCE {
- hostAddress OCTET STRING,
- hostCreationOrder INTEGER (1..65535),
- hostIndex INTEGER (1..65535),
- hostInPkts Counter,
- hostOutPkts Counter,
- hostInOctets Counter,
- hostOutOctets Counter,
- hostOutErrors Counter,
- hostOutBroadcastPkts Counter,
- hostOutMulticastPkts Counter
- }
-
- hostAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The physical address of this host."
- ::= { hostEntry 1 }
-
- hostCreationOrder OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that defines the relative ordering of
- the creation time of hosts captured for a
- particular hostControlEntry. This index shall
- be between 1 and N, where N is the value of
- the associated hostControlTableSize. The ordering
- of the indexes is based on the order of each entry's
- insertion into the table, in which entries added
- earlier have a lower index value than entries added
- later.
-
- It is important to note that the order for a
- particular entry may change as an (earlier) entry
- is deleted from the table. Because this order may
- change, management stations should make use of the
- hostControlLastDeleteTime variable in the
- hostControlEntry associated with the relevant
- portion of the hostTable. By observing
- this variable, the management station may detect
- the circumstances where a previous association
-
-
- between a value of hostCreationOrder
- and a hostEntry may no longer hold."
- ::= { hostEntry 2 }
-
- hostIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected host statistics of which
- this entry is a part. The set of hosts
- identified by a particular value of this
- index is associated with the hostControlEntry
- as identified by the same value of hostControlIndex."
- ::= { hostEntry 3 }
-
- hostInPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted to this
- address since it was added to the hostTable."
- ::= { hostEntry 4 }
-
- hostOutPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets, including bad packets,
- transmitted by this address since it was added
- to the hostTable."
- ::= { hostEntry 5 }
-
- hostInOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted to this address
- since it was added to the hostTable (excluding
- framing bits but including FCS octets), except for
- those octets in bad packets."
- ::= { hostEntry 6 }
-
- hostOutOctets OBJECT-TYPE
- SYNTAX Counter
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted by this address
- since it was added to the hostTable (excluding
- framing bits but including FCS octets), including
- those octets in bad packets."
- ::= { hostEntry 7 }
-
- hostOutErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted by this address
- since this host was added to the hostTable."
- ::= { hostEntry 8 }
-
- hostOutBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to the broadcast address
- since this host was added to the hostTable."
- ::= { hostEntry 9 }
-
- hostOutMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to a multicast address
- since this host was added to the hostTable.
- Note that this number does not include packets
- directed to the broadcast address."
- ::= { hostEntry 10 }
-
- -- host Time Table
-
- hostTimeTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostTimeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of time-ordered host table entries."
-
-
- ::= { hosts 3 }
-
- hostTimeEntry OBJECT-TYPE
- SYNTAX HostTimeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for a particular host
- that has been discovered on an interface of this
- device. This collection includes the relative
- ordering of the creation time of this object. For
- example, an instance of the hostTimeOutBroadcastPkts
- object might be named
- hostTimeOutBroadcastPkts.1.687"
- INDEX { hostTimeIndex, hostTimeCreationOrder }
- ::= { hostTimeTable 1 }
-
- HostTimeEntry ::= SEQUENCE {
- hostTimeAddress OCTET STRING,
- hostTimeCreationOrder INTEGER (1..65535),
- hostTimeIndex INTEGER (1..65535),
- hostTimeInPkts Counter,
- hostTimeOutPkts Counter,
- hostTimeInOctets Counter,
- hostTimeOutOctets Counter,
- hostTimeOutErrors Counter,
- hostTimeOutBroadcastPkts Counter,
- hostTimeOutMulticastPkts Counter
- }
-
- hostTimeAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The physical address of this host."
- ::= { hostTimeEntry 1 }
-
- hostTimeCreationOrder OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in
- the hostTime table among those entries associated
- with the same hostControlEntry. This index shall
- be between 1 and N, where N is the value of
- the associated hostControlTableSize. The ordering
-
-
- of the indexes is based on the order of each entry's
- insertion into the table, in which entries added
- earlier have a lower index value than entries added
- later. Thus the management station has the ability to
- learn of new entries added to this table without
- downloading the entire table.
-
- It is important to note that the index for a
- particular entry may change as an (earlier) entry
- is deleted from the table. Because this order may
- change, management stations should make use of the
- hostControlLastDeleteTime variable in the
- hostControlEntry associated with the relevant
- portion of the hostTimeTable. By observing
- this variable, the management station may detect
- the circumstances where a download of the table
- may have missed entries, and where a previous
- association between a value of hostTimeCreationOrder
- and a hostTimeEntry may no longer hold."
- ::= { hostTimeEntry 2 }
-
- hostTimeIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected host statistics of which
- this entry is a part. The set of hosts
- identified by a particular value of this
- index is associated with the hostControlEntry
- as identified by the same value of hostControlIndex."
- ::= { hostTimeEntry 3 }
-
- hostTimeInPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted to this
- address since it was added to the hostTimeTable."
- ::= { hostTimeEntry 4 }
-
- hostTimeOutPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of god packets transmitted by this
-
-
- address since it was added to the hostTimeTable."
- ::= { hostTimeEntry 5 }
-
- hostTimeInOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted to this address
- since it was added to the hostTimeTable (excluding
- framing bits but including FCS octets), except for
- those octets in bad packets."
- ::= { hostTimeEntry 6 }
-
- hostTimeOutOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted by this address
- since it was added to the hostTimeTable (excluding
- framing bits but including FCS octets), including
- those octets in bad packets."
- ::= { hostTimeEntry 7 }
-
- hostTimeOutErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted by this address
- since this host was added to the hostTimeTable."
- ::= { hostTimeEntry 8 }
-
- hostTimeOutBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to the broadcast address
- since this host was added to the hostTimeTable."
- ::= { hostTimeEntry 9 }
-
- hostTimeOutMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to a multicast address
- since this host was added to the hostTimeTable.
- Note that this number does not include packets
- directed to the broadcast address."
- ::= { hostTimeEntry 10 }
-
-
- -- The Host Top "N" Group
-
- -- Implementation of the Host Top N group is optional.
- --
- -- The Host Top N group requires the implementation of the
- -- host group.
- --
- -- The Host Top N group is used to prepare reports that
- -- describe the hosts that top a list ordered by one of
- -- their statistics.
- -- The available statistics are samples of one of their
- -- base statistics, over an interval specified by the
- -- management station. Thus, these statistics are rate
- -- based. The management station also selects how many such
- -- hosts are reported.
-
- -- The hostTopNControlTable is used to initiate the
- -- generation of such a report. The management station
- -- may select the parameters of such a report, such as
- -- which interface, which statistic, how many hosts,
- -- and the start and stop times of the sampling. When
- -- the report is prepared, entries are created in the
- -- hostTopNTable associated with the relevant
- -- hostTopNControlEntry. These entries are static for
- -- each report after it has been prepared.
-
- hostTopNControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostTopNControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of top N host control entries."
- ::= { hostTopN 1 }
-
- hostTopNControlEntry OBJECT-TYPE
- SYNTAX HostTopNControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
-
-
- "A set of parameters that control the creation of a
- report of the top N hosts according to several
- metrics. For example, an instance of the
- hostTopNDuration object might be named
- hostTopNDuration.3"
- INDEX { hostTopNControlIndex }
- ::= { hostTopNControlTable 1 }
-
- HostTopNControlEntry ::= SEQUENCE {
- hostTopNControlIndex INTEGER (1..65535),
- hostTopNHostIndex INTEGER (1..65535),
- hostTopNRateBase INTEGER,
- hostTopNTimeRemaining INTEGER,
- hostTopNDuration INTEGER,
- hostTopNRequestedSize INTEGER,
- hostTopNGrantedSize INTEGER,
- hostTopNStartTime TimeTicks,
- hostTopNOwner OwnerString,
- hostTopNStatus EntryStatus
- }
-
- hostTopNControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the hostTopNControl table. Each such
- entry defines one top N report prepared for
- one interface."
- ::= { hostTopNControlEntry 1 }
-
- hostTopNHostIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The host table for which a top N report will be
- prepared on behalf of this entry. The host table
- identified by a particular value of this index is
- associated with the same host table as identified by
- the same value of hostIndex.
-
- This object may not be modified if the associated
- hostTopNStatus object is equal to valid(1)."
- ::= { hostTopNControlEntry 2 }
-
- hostTopNRateBase OBJECT-TYPE
-
-
- SYNTAX INTEGER {
- hostTopNInPkts(1),
- hostTopNOutPkts(2),
- hostTopNInOctets(3),
- hostTopNOutOctets(4),
- hostTopNOutErrors(5),
- hostTopNOutBroadcastPkts(6),
- hostTopNOutMulticastPkts(7)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The variable for each host that the hostTopNRate
- variable is based upon.
-
- This object may not be modified if the associated
- hostTopNStatus object is equal to valid(1)."
- ::= { hostTopNControlEntry 3 }
-
- hostTopNTimeRemaining OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The number of seconds left in the report currently
- being collected. When this object is modified by
- the management station, a new collection is started,
- possibly aborting a currently running report. The
- new value is used as the requested duration of this
- report, which is loaded into the associated
- hostTopNDuration object.
-
- When this object is set to a non-zero value, any
- associated hostTopNEntries shall be made
- inaccessible by the monitor. While the value of
- this object is non-zero, it decrements by one per
- second until it reaches zero. During this time, all
- associated hostTopNEntries shall remain
- inaccessible. At the time that this object
- decrements to zero, the report is made accessible in
- the hostTopNTable. Thus, the hostTopN table needs
- to be created only at the end of the collection
- interval."
- DEFVAL { 0 }
- ::= { hostTopNControlEntry 4 }
-
- hostTopNDuration OBJECT-TYPE
- SYNTAX INTEGER
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of seconds that this report has collected
- during the last sampling interval, or if this
- report is currently being collected, the number
- of seconds that this report is being collected
- during this sampling interval.
-
- When the associated hostTopNTimeRemaining object is
- set, this object shall be set by the probe to the
- same value and shall not be modified until the next
- time the hostTopNTimeRemaining is set.
-
- This value shall be zero if no reports have been
- requested for this hostTopNControlEntry."
- DEFVAL { 0 }
- ::= { hostTopNControlEntry 5 }
-
- hostTopNRequestedSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum number of hosts requested for the top N
- table.
-
- When this object is created or modified, the probe
- should set hostTopNGrantedSize as closely to this
- object as is possible for the particular probe
- implementation and available resources."
- DEFVAL { 10 }
- ::= { hostTopNControlEntry 6 }
-
- hostTopNGrantedSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum number of hosts in the top N table.
-
- When the associated hostTopNRequestedSize object is
- created or modified, the probe should set this
- object as closely to the requested value as is
- possible for the particular implementation and
- available resources. The probe must not lower this
- value except as a result of a set to the associated
- hostTopNRequestedSize object.
-
-
- Hosts with the highest value of hostTopNRate shall be
- placed in this table in decreasing order of this rate
- until there is no more room or until there are no more
- hosts."
- ::= { hostTopNControlEntry 7 }
-
- hostTopNStartTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when this top N report was
- last started. In other words, this is the time that
- the associated hostTopNTimeRemaining object was
- modified to start the requested report."
- ::= { hostTopNControlEntry 8 }
-
- hostTopNOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { hostTopNControlEntry 9 }
-
- hostTopNStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this hostTopNControl entry.
-
- If this object is not equal to valid(1), all
- associated hostTopNEntries shall be deleted by the
- agent."
- ::= { hostTopNControlEntry 10 }
-
- hostTopNTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostTopNEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of top N host entries."
- ::= { hostTopN 2 }
-
- hostTopNEntry OBJECT-TYPE
- SYNTAX HostTopNEntry
-
-
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of statistics for a host that is part of a
- top N report. For example, an instance of the
- hostTopNRate object might be named
- hostTopNRate.3.10"
- INDEX { hostTopNReport, hostTopNIndex }
- ::= { hostTopNTable 1 }
-
- HostTopNEntry ::= SEQUENCE {
- hostTopNReport INTEGER (1..65535),
- hostTopNIndex INTEGER (1..65535),
- hostTopNAddress OCTET STRING,
- hostTopNRate INTEGER
- }
-
- hostTopNReport OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This object identifies the top N report of which
- this entry is a part. The set of hosts
- identified by a particular value of this
- object is part of the same report as identified
- by the same value of the hostTopNControlIndex object."
- ::= { hostTopNEntry 1 }
-
- hostTopNIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in
- the hostTopN table among those in the same report.
- This index is between 1 and N, where N is the
- number of entries in this table. Increasing values
- of hostTopNIndex shall be assigned to entries with
- decreasing values of hostTopNRate until index N
- is assigned to the entry with the lowest value of
- hostTopNRate or there are no more hostTopNEntries."
- ::= { hostTopNEntry 2 }
-
- hostTopNAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "The physical address of this host."
- ::= { hostTopNEntry 3 }
-
- hostTopNRate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The amount of change in the selected variable
- during this sampling interval. The selected
- variable is this host's instance of the object
- selected by hostTopNRateBase."
- ::= { hostTopNEntry 4 }
-
-
- -- The Matrix Group
-
- -- Implementation of the Matrix group is optional.
- --
- -- The Matrix group consists of the matrixControlTable,
- -- matrixSDTable and the matrixDSTable. These tables
- -- store statistics for a particular conversation
- -- between two addresses. As the device detects a new
- -- conversation, including those to a non-unicast
- -- address, it creates a new entry in both of the
- -- matrix tables. It must only create new entries
- -- based on information received in good packets. If
- -- the monitoring device finds itself short of
- -- resources, it may delete entries as needed. It is
- -- suggested that the device delete the least recently
- -- used entries first.
-
- matrixControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MatrixControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of information entries for the
- traffic matrix on each interface."
- ::= { matrix 1 }
-
- matrixControlEntry OBJECT-TYPE
- SYNTAX MatrixControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Information about a traffic matrix on a particular
-
-
- interface. For example, an instance of the
- matrixControlLastDeleteTime object might be named
- matrixControlLastDeleteTime.1"
- INDEX { matrixControlIndex }
- ::= { matrixControlTable 1 }
-
- MatrixControlEntry ::= SEQUENCE {
- matrixControlIndex INTEGER (1..65535),
- matrixControlDataSource OBJECT IDENTIFIER,
- matrixControlTableSize INTEGER,
- matrixControlLastDeleteTime TimeTicks,
- matrixControlOwner OwnerString,
- matrixControlStatus EntryStatus
- }
-
- matrixControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- matrixControl table. Each such entry defines
- a function that discovers conversations on a
- particular interface and places statistics about
- them in the matrixSDTable and the matrixDSTable on
- behalf of this matrixControlEntry."
- ::= { matrixControlEntry 1 }
-
- matrixControlDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the source of
- the data from which this entry creates a traffic
- matrix. This source can be any interface on this
- device. In order to identify a particular
- interface, this object shall identify the instance
- of the ifIndex object, defined in RFC 1213 and RFC
- 1573 [4,6], for the desired interface. For example,
- if an entry were to receive data from interface #1,
- this object would be set to ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
- identified interface.
-
- An agent may or may not be able to tell if
-
-
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- matrixControlStatus object is equal to valid(1)."
- ::= { matrixControlEntry 2 }
-
- matrixControlTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of matrixSDEntries in the matrixSDTable
- for this interface. This must also be the value of
- the number of entries in the matrixDSTable for this
- interface."
- ::= { matrixControlEntry 3 }
-
- matrixControlLastDeleteTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when the last entry
- was deleted from the portion of the matrixSDTable
- or matrixDSTable associated with this
- matrixControlEntry. If no deletions have occurred,
- this value shall be zero."
- ::= { matrixControlEntry 4 }
-
- matrixControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { matrixControlEntry 5 }
-
- matrixControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "The status of this matrixControl entry.
-
- If this object is not equal to valid(1), all
- associated entries in the matrixSDTable and the
- matrixDSTable shall be deleted by the agent."
- ::= { matrixControlEntry 6 }
-
- matrixSDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MatrixSDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of traffic matrix entries indexed by
- source and destination MAC address."
- ::= { matrix 2 }
-
- matrixSDEntry OBJECT-TYPE
- SYNTAX MatrixSDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for communications between
- two addresses on a particular interface. For example,
- an instance of the matrixSDPkts object might be named
- matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113"
- INDEX { matrixSDIndex,
- matrixSDSourceAddress, matrixSDDestAddress }
- ::= { matrixSDTable 1 }
-
- MatrixSDEntry ::= SEQUENCE {
- matrixSDSourceAddress OCTET STRING,
- matrixSDDestAddress OCTET STRING,
- matrixSDIndex INTEGER (1..65535),
- matrixSDPkts Counter,
- matrixSDOctets Counter,
- matrixSDErrors Counter
- }
-
- matrixSDSourceAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The source physical address."
- ::= { matrixSDEntry 1 }
-
- matrixSDDestAddress OBJECT-TYPE
-
-
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The destination physical address."
- ::= { matrixSDEntry 2 }
-
- matrixSDIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected matrix statistics of which
- this entry is a part. The set of matrix statistics
- identified by a particular value of this index
- is associated with the same matrixControlEntry
- as identified by the same value of
- matrixControlIndex."
- ::= { matrixSDEntry 3 }
-
- matrixSDPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets transmitted from the source
- address to the destination address (this number
- includes bad packets)."
- ::= { matrixSDEntry 4 }
-
- matrixSDOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets (excluding framing bits but
- including FCS octets) contained in all packets
- transmitted from the source address to the
- destination address."
- ::= { matrixSDEntry 5 }
-
- matrixSDErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted from
- the source address to the destination address."
-
-
- ::= { matrixSDEntry 6 }
-
-
- -- Traffic matrix tables from destination to source
-
- matrixDSTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MatrixDSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of traffic matrix entries indexed by
- destination and source MAC address."
- ::= { matrix 3 }
-
- matrixDSEntry OBJECT-TYPE
- SYNTAX MatrixDSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for communications between
- two addresses on a particular interface. For example,
- an instance of the matrixSDPkts object might be named
- matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176"
- INDEX { matrixDSIndex,
- matrixDSDestAddress, matrixDSSourceAddress }
- ::= { matrixDSTable 1 }
-
- MatrixDSEntry ::= SEQUENCE {
- matrixDSSourceAddress OCTET STRING,
- matrixDSDestAddress OCTET STRING,
- matrixDSIndex INTEGER (1..65535),
- matrixDSPkts Counter,
- matrixDSOctets Counter,
- matrixDSErrors Counter
- }
-
- matrixDSSourceAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The source physical address."
- ::= { matrixDSEntry 1 }
-
- matrixDSDestAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "The destination physical address."
- ::= { matrixDSEntry 2 }
-
- matrixDSIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected matrix statistics of which
- this entry is a part. The set of matrix statistics
- identified by a particular value of this index
- is associated with the same matrixControlEntry
- as identified by the same value of
- matrixControlIndex."
- ::= { matrixDSEntry 3 }
-
- matrixDSPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets transmitted from the source
- address to the destination address (this number
- includes bad packets)."
- ::= { matrixDSEntry 4 }
-
- matrixDSOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets (excluding framing bits
- but including FCS octets) contained in all packets
- transmitted from the source address to the
- destination address."
- ::= { matrixDSEntry 5 }
-
- matrixDSErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted from
- the source address to the destination address."
- ::= { matrixDSEntry 6 }
-
-
-
-
- -- The Filter Group
-
- -- Implementation of the Filter group is optional.
- --
- -- The Filter group allows packets to be captured with an
- -- arbitrary filter expression. A logical data and
- -- event stream or "channel" is formed by the packets
- -- that match the filter expression.
- --
- -- This filter mechanism allows the creation of an arbitrary
- -- logical expression with which to filter packets. Each
- -- filter associated with a channel is OR'ed with the others.
- -- Within a filter, any bits checked in the data and status
- -- are AND'ed with respect to other bits in the same filter.
- -- The NotMask also allows for checking for inequality.
- -- Finally, the channelAcceptType object allows for
- -- inversion of the whole equation.
- --
- -- If a management station wishes to receive a trap to alert
- -- it that new packets have been captured and are available
- -- for download, it is recommended that it set up an alarm
- -- entry that monitors the value of the relevant
- -- channelMatches instance.
- --
- -- The channel can be turned on or off, and can also
- -- generate events when packets pass through it.
-
- filterTable OBJECT-TYPE
- SYNTAX SEQUENCE OF FilterEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of packet filter entries."
- ::= { filter 1 }
-
- filterEntry OBJECT-TYPE
- SYNTAX FilterEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters for a packet filter applied on a
- particular interface. As an example, an instance of
- the filterPktData object might be named
- filterPktData.12"
- INDEX { filterIndex }
- ::= { filterTable 1 }
-
-
-
-
- FilterEntry ::= SEQUENCE {
- filterIndex INTEGER (1..65535),
- filterChannelIndex INTEGER (1..65535),
- filterPktDataOffset INTEGER,
- filterPktData OCTET STRING,
- filterPktDataMask OCTET STRING,
- filterPktDataNotMask OCTET STRING,
- filterPktStatus INTEGER,
- filterPktStatusMask INTEGER,
- filterPktStatusNotMask INTEGER,
- filterOwner OwnerString,
- filterStatus EntryStatus
- }
-
- filterIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the filter table. Each such entry defines
- one filter that is to be applied to every packet
- received on an interface."
- ::= { filterEntry 1 }
-
- filterChannelIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the channel of which this
- filter is a part. The filters identified by a
- particular value of this object are associated with
- the same channel as identified by the same value of
- the channelIndex object."
- ::= { filterEntry 2 }
-
- filterPktDataOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The offset from the beginning of each packet where
- a match of packet data will be attempted. This offset
- is measured from the point in the physical layer
- packet after the framing bits, if any. For example,
- in an Ethernet frame, this point is at the beginning
- of the destination MAC address.
-
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- DEFVAL { 0 }
- ::= { filterEntry 3 }
-
- filterPktData OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The data that is to be matched with the input
- packet. For each packet received, this filter and
- the accompanying filterPktDataMask and
- filterPktDataNotMask will be adjusted for the
- offset. The only bits relevant to this match
- algorithm are those that have the corresponding
- filterPktDataMask bit equal to one. The following
- three rules are then applied to every packet:
-
- (1) If the packet is too short and does not have data
- corresponding to part of the filterPktData, the
- packet will fail this data match.
-
- (2) For each relevant bit from the packet with the
- corresponding filterPktDataNotMask bit set to
- zero, if the bit from the packet is not equal to
- the corresponding bit from the filterPktData,
- then the packet will fail this data match.
-
- (3) If for every relevant bit from the packet with the
- corresponding filterPktDataNotMask bit set to one,
- the bit from the packet is equal to the
- corresponding bit from the filterPktData, then
- the packet will fail this data match.
-
- Any packets that have not failed any of the three
- matches above have passed this data match. In
- particular, a zero length filter will match any
- packet.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 4 }
-
- filterPktDataMask OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "The mask that is applied to the match process.
- After adjusting this mask for the offset, only those
- bits in the received packet that correspond to bits
- set in this mask are relevant for further processing
- by the match algorithm. The offset is applied to
- filterPktDataMask in the same way it is applied to the
- filter. For the purposes of the matching algorithm,
- if the associated filterPktData object is longer
- than this mask, this mask is conceptually extended
- with '1' bits until it reaches the length of the
- filterPktData object.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 5 }
-
- filterPktDataNotMask OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The inversion mask that is applied to the match
- process. After adjusting this mask for the offset,
- those relevant bits in the received packet that
- correspond to bits cleared in this mask must all be
- equal to their corresponding bits in the
- filterPktData object for the packet to be accepted.
- In addition, at least one of those relevant bits in
- the received packet that correspond to bits set in
- this mask must be different to its corresponding bit
- in the filterPktData object.
-
- For the purposes of the matching algorithm, if the
- associated filterPktData object is longer than this
- mask, this mask is conceptually extended with '0'
- bits until it reaches the length of the
- filterPktData object.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 6 }
-
- filterPktStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
-
-
- "The status that is to be matched with the input
- packet. The only bits relevant to this match
- algorithm are those that have the corresponding
- filterPktStatusMask bit equal to one. The following
- two rules are then applied to every packet:
-
- (1) For each relevant bit from the packet status
- with the corresponding filterPktStatusNotMask bit
- set to zero, if the bit from the packet status is
- not equal to the corresponding bit from the
- filterPktStatus, then the packet will fail this
- status match.
-
- (2) If for every relevant bit from the packet status
- with the corresponding filterPktStatusNotMask bit
- set to one, the bit from the packet status is
- equal to the corresponding bit from the
- filterPktStatus, then the packet will fail this
- status match.
-
- Any packets that have not failed either of the two
- matches above have passed this status match. In
- particular, a zero length status filter will match any
- packet's status.
-
- The value of the packet status is a sum. This sum
- initially takes the value zero. Then, for each
- error, E, that has been discovered in this packet,
- 2 raised to a value representing E is added to the
- sum. The errors and the bits that represent them are
- dependent on the media type of the interface that
- this channel is receiving packets from.
-
- The errors defined for a packet captured off of an
- Ethernet interface are as follows:
-
- bit # Error
- 0 Packet is longer than 1518 octets
- 1 Packet is shorter than 64 octets
- 2 Packet experienced a CRC or Alignment
- error
-
- For example, an Ethernet fragment would have a
- value of 6 (2^1 + 2^2).
-
- As this MIB is expanded to new media types, this
- object will have other media-specific errors
- defined.
-
-
- For the purposes of this status matching algorithm,
- if the packet status is longer than this
- filterPktStatus object, this object is conceptually
- extended with '0' bits until it reaches the size of
- the packet status.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 7 }
-
- filterPktStatusMask OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The mask that is applied to the status match
- process. Only those bits in the received packet
- that correspond to bits set in this mask are
- relevant for further processing by the status match
- algorithm. For the purposes of the matching
- algorithm, if the associated filterPktStatus object
- is longer than this mask, this mask is conceptually
- extended with '1' bits until it reaches the size of
- the filterPktStatus. In addition, if a packet
- status is longer than this mask, this mask is
- conceptually extended with '0' bits until it reaches
- the size of the packet status.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 8 }
-
- filterPktStatusNotMask OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The inversion mask that is applied to the status
- match process. Those relevant bits in the received
- packet status that correspond to bits cleared in
- this mask must all be equal to their corresponding
- bits in the filterPktStatus object for the packet to
- be accepted. In addition, at least one of those
- relevant bits in the received packet status that
- correspond to bits set in this mask must be
- different to its corresponding bit in the
- filterPktStatus object for the packet to be
- accepted.
-
-
- For the purposes of the matching algorithm, if the
- associated filterPktStatus object or a packet status
- is longer than this mask, this mask is conceptually
- extended with '0' bits until it reaches the longer
- of the lengths of the filterPktStatus object and the
- packet status.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 9 }
-
- filterOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { filterEntry 10 }
-
- filterStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this filter entry."
- ::= { filterEntry 11 }
-
- channelTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ChannelEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of packet channel entries."
- ::= { filter 2 }
-
- channelEntry OBJECT-TYPE
- SYNTAX ChannelEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters for a packet channel applied on a
- particular interface. As an example, an instance of
- the channelMatches object might be named
- channelMatches.3"
- INDEX { channelIndex }
- ::= { channelTable 1 }
-
-
-
- ChannelEntry ::= SEQUENCE {
- channelIndex INTEGER (1..65535),
- channelIfIndex INTEGER (1..65535),
- channelAcceptType INTEGER,
- channelDataControl INTEGER,
- channelTurnOnEventIndex INTEGER (0..65535),
- channelTurnOffEventIndex INTEGER (0..65535),
- channelEventIndex INTEGER (0..65535),
- channelEventStatus INTEGER,
- channelMatches Counter,
- channelDescription DisplayString (SIZE (0..127)),
- channelOwner OwnerString,
- channelStatus EntryStatus
- }
-
- channelIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- channel table. Each such entry defines one channel,
- a logical data and event stream.
-
- It is suggested that before creating a channel, an
- application should scan all instances of the
- filterChannelIndex object to make sure that there
- are no pre-existing filters that would be
- inadvertently be linked to the channel."
- ::= { channelEntry 1 }
-
- channelIfIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object uniquely identifies the
- interface on this remote network monitoring device
- to which the associated filters are applied to allow
- data into this channel. The interface identified by
- a particular value of this object is the same
- interface as identified by the same value of the
- ifIndex object, defined in RFC 1213 and RFC 1573
- [4,6].
-
- The filters in this group are applied to all packets
- on the local network segment attached to the
- identified interface.
-
-
- An agent may or may not be able to tell if
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 2 }
-
- channelAcceptType OBJECT-TYPE
- SYNTAX INTEGER {
- acceptMatched(1),
- acceptFailed(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object controls the action of the filters
- associated with this channel. If this object is equal
- to acceptMatched(1), packets will be accepted to this
- channel if they are accepted by both the packet data
- and packet status matches of an associated filter. If
- this object is equal to acceptFailed(2), packets will
- be accepted to this channel only if they fail either
- the packet data match or the packet status match of
- each of the associated filters.
-
- In particular, a channel with no associated filters
- will match no packets if set to acceptMatched(1)
- case and will match all packets in the
- acceptFailed(2) case.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 3 }
-
- channelDataControl OBJECT-TYPE
- SYNTAX INTEGER {
- on(1),
- off(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
-
-
- "This object controls the flow of data through this
- channel. If this object is on(1), data, status and
- events flow through this channel. If this object is
- off(2), data, status and events will not flow
- through this channel."
- DEFVAL { off }
- ::= { channelEntry 4 }
-
- channelTurnOnEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object identifies the event
- that is configured to turn the associated
- channelDataControl from off to on when the event is
- generated. The event identified by a particular value
- of this object is the same event as identified by the
- same value of the eventIndex object. If there is no
- corresponding entry in the eventTable, then no
- association exists. In fact, if no event is intended
- for this channel, channelTurnOnEventIndex must be
- set to zero, a non-existent event index.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 5 }
-
- channelTurnOffEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object identifies the event
- that is configured to turn the associated
- channelDataControl from on to off when the event is
- generated. The event identified by a particular value
- of this object is the same event as identified by the
- same value of the eventIndex object. If there is no
- corresponding entry in the eventTable, then no
- association exists. In fact, if no event is intended
- for this channel, channelTurnOffEventIndex must be
- set to zero, a non-existent event index.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 6 }
-
-
-
- channelEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object identifies the event
- that is configured to be generated when the
- associated channelDataControl is on and a packet
- is matched. The event identified by a particular
- value of this object is the same event as identified
- by the same value of the eventIndex object. If
- there is no corresponding entry in the eventTable,
- then no association exists. In fact, if no event is
- intended for this channel, channelEventIndex must be
- set to zero, a non-existent event index.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 7 }
-
- channelEventStatus OBJECT-TYPE
- SYNTAX INTEGER {
- eventReady(1),
- eventFired(2),
- eventAlwaysReady(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The event status of this channel.
-
- If this channel is configured to generate events
- when packets are matched, a means of controlling
- the flow of those events is often needed. When
- this object is equal to eventReady(1), a single
- event may be generated, after which this object
- will be set by the probe to eventFired(2). While
- in the eventFired(2) state, no events will be
- generated until the object is modified to
- eventReady(1) (or eventAlwaysReady(3)). The
- management station can thus easily respond to a
- notification of an event by re-enabling this object.
-
- If the management station wishes to disable this
- flow control and allow events to be generated
- at will, this object may be set to
- eventAlwaysReady(3). Disabling the flow control
- is discouraged as it can result in high network
-
-
- traffic or other performance problems."
- DEFVAL { eventReady }
- ::= { channelEntry 8 }
-
- channelMatches OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of times this channel has matched a
- packet. Note that this object is updated even when
- channelDataControl is set to off."
- ::= { channelEntry 9 }
-
- channelDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..127))
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A comment describing this channel."
- ::= { channelEntry 10 }
-
- channelOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { channelEntry 11 }
-
- channelStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this channel entry."
- ::= { channelEntry 12 }
-
-
- -- The Packet Capture Group
-
- -- Implementation of the Packet Capture group is optional.
- --
- -- The Packet Capture Group requires implementation of the
- -- Filter Group.
- --
- -- The Packet Capture group allows packets to be captured
-
-
- -- upon a filter match. The bufferControlTable controls
- -- the captured packets output from a channel that is
- -- associated with it. The captured packets are placed
- -- in entries in the captureBufferTable. These entries are
- -- associated with the bufferControlEntry on whose behalf they
- -- were stored.
-
- bufferControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BufferControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of buffers control entries."
- ::= { capture 1 }
-
- bufferControlEntry OBJECT-TYPE
- SYNTAX BufferControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters that control the collection of
- a stream of packets that have matched filters. As
- an example, an instance of the
- bufferControlCaptureSliceSize object might be named
- bufferControlCaptureSliceSize.3"
- INDEX { bufferControlIndex }
- ::= { bufferControlTable 1 }
-
- BufferControlEntry ::= SEQUENCE {
- bufferControlIndex INTEGER (1..65535),
- bufferControlChannelIndex INTEGER (1..65535),
- bufferControlFullStatus INTEGER,
- bufferControlFullAction INTEGER,
- bufferControlCaptureSliceSize INTEGER,
- bufferControlDownloadSliceSize INTEGER,
- bufferControlDownloadOffset INTEGER,
- bufferControlMaxOctetsRequested INTEGER,
- bufferControlMaxOctetsGranted INTEGER,
- bufferControlCapturedPackets INTEGER,
- bufferControlTurnOnTime TimeTicks,
- bufferControlOwner OwnerString,
- bufferControlStatus EntryStatus
- }
-
- bufferControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the bufferControl table. The value of this
- index shall never be zero. Each such
- entry defines one set of packets that is
- captured and controlled by one or more filters."
- ::= { bufferControlEntry 1 }
-
- bufferControlChannelIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An index that identifies the channel that is the
- source of packets for this bufferControl table.
- The channel identified by a particular value of this
- index is the same as identified by the same value of
- the channelIndex object.
-
- This object may not be modified if the associated
- bufferControlStatus object is equal to valid(1)."
- ::= { bufferControlEntry 2 }
-
- bufferControlFullStatus OBJECT-TYPE
- SYNTAX INTEGER {
- spaceAvailable(1),
- full(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This object shows whether the buffer has room to
- accept new packets or if it is full.
-
- If the status is spaceAvailable(1), the buffer is
- accepting new packets normally. If the status is
- full(2) and the associated bufferControlFullAction
- object is wrapWhenFull, the buffer is accepting new
- packets by deleting enough of the oldest packets
- to make room for new ones as they arrive. Otherwise,
- if the status is full(2) and the
- bufferControlFullAction object is lockWhenFull,
- then the buffer has stopped collecting packets.
-
- When this object is set to full(2) the probe must
- not later set it to spaceAvailable(1) except in the
- case of a significant gain in resources such as
- an increase of bufferControlOctetsGranted. In
-
-
- particular, the wrap-mode action of deleting old
- packets to make room for newly arrived packets
- must not affect the value of this object."
- ::= { bufferControlEntry 3 }
-
- bufferControlFullAction OBJECT-TYPE
- SYNTAX INTEGER {
- lockWhenFull(1),
- wrapWhenFull(2) -- FIFO
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Controls the action of the buffer when it
- reaches the full status. When in the lockWhenFull(1)
- state and a packet is added to the buffer that
- fills the buffer, the bufferControlFullStatus will
- be set to full(2) and this buffer will stop capturing
- packets."
- ::= { bufferControlEntry 4 }
-
- bufferControlCaptureSliceSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum number of octets of each packet
- that will be saved in this capture buffer.
- For example, if a 1500 octet packet is received by
- the probe and this object is set to 500, then only
- 500 octets of the packet will be stored in the
- associated capture buffer. If this variable is set
- to 0, the capture buffer will save as many octets
- as is possible.
-
- This object may not be modified if the associated
- bufferControlStatus object is equal to valid(1)."
- DEFVAL { 100 }
- ::= { bufferControlEntry 5 }
-
- bufferControlDownloadSliceSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum number of octets of each packet
- in this capture buffer that will be returned in
- an SNMP retrieval of that packet. For example,
-
-
- if 500 octets of a packet have been stored in the
- associated capture buffer, the associated
- bufferControlDownloadOffset is 0, and this
- object is set to 100, then the captureBufferPacket
- object that contains the packet will contain only
- the first 100 octets of the packet.
-
- A prudent manager will take into account possible
- interoperability or fragmentation problems that may
- occur if the download slice size is set too large.
- In particular, conformant SNMP implementations are not
- required to accept messages whose length exceeds 484
- octets, although they are encouraged to support larger
- datagrams whenever feasible."
- DEFVAL { 100 }
- ::= { bufferControlEntry 6 }
-
- bufferControlDownloadOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The offset of the first octet of each packet
- in this capture buffer that will be returned in
- an SNMP retrieval of that packet. For example,
- if 500 octets of a packet have been stored in the
- associated capture buffer and this object is set to
- 100, then the captureBufferPacket object that
- contains the packet will contain bytes starting
- 100 octets into the packet."
- DEFVAL { 0 }
- ::= { bufferControlEntry 7 }
-
- bufferControlMaxOctetsRequested OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The requested maximum number of octets to be
- saved in this captureBuffer, including any
- implementation-specific overhead. If this variable
- is set to -1, the capture buffer will save as many
- octets as is possible.
-
- When this object is created or modified, the probe
- should set bufferControlMaxOctetsGranted as closely
- to this object as is possible for the particular probe
- implementation and available resources. However, if
-
-
- the object has the special value of -1, the probe
- must set bufferControlMaxOctetsGranted to -1."
- DEFVAL { -1 }
- ::= { bufferControlEntry 8 }
-
- bufferControlMaxOctetsGranted OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum number of octets that can be
- saved in this captureBuffer, including overhead.
- If this variable is -1, the capture buffer will save
- as many octets as possible.
-
- When the bufferControlMaxOctetsRequested object is
- created or modified, the probe should set this object
- as closely to the requested value as is possible for
- the particular probe implementation and available
- resources.
- However, if the request object has the special value
- of -1, the probe must set this object to -1.
- The probe must not lower this value except as a result
- of a modification to the associated
- bufferControlMaxOctetsRequested object.
-
- When this maximum number of octets is reached
- and a new packet is to be added to this
- capture buffer and the corresponding
- bufferControlFullAction is set to wrapWhenFull(2),
- enough of the oldest packets associated with this
- capture buffer shall be deleted by the agent so
- that the new packet can be added. If the
- corresponding bufferControlFullAction is set to
- lockWhenFull(1), the new packet shall be discarded.
- In either case, the probe must set
- bufferControlFullStatus to full(2).
-
- When the value of this object changes to a value less
- than the current value, entries are deleted from
- the captureBufferTable associated with this
- bufferControlEntry. Enough of the
- oldest of these captureBufferEntries shall be
- deleted by the agent so that the number of octets
- used remains less than or equal to the new value of
- this object.
-
- When the value of this object changes to a value
-
-
- greater than the current value, the number of
- associated captureBufferEntries may be allowed to
- grow."
- ::= { bufferControlEntry 9 }
-
- bufferControlCapturedPackets OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets currently in this
- captureBuffer."
- ::= { bufferControlEntry 10 }
-
- bufferControlTurnOnTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when this capture buffer was
- first turned on."
- ::= { bufferControlEntry 11 }
-
- bufferControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { bufferControlEntry 12 }
-
- bufferControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this buffer Control Entry."
- ::= { bufferControlEntry 13 }
-
- captureBufferTable OBJECT-TYPE
- SYNTAX SEQUENCE OF CaptureBufferEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of packets captured off of a channel."
- ::= { capture 2 }
-
-
-
- captureBufferEntry OBJECT-TYPE
- SYNTAX CaptureBufferEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A packet captured off of an attached network. As an
- example, an instance of the captureBufferPacketData
- object might be named captureBufferPacketData.3.1783"
- INDEX { captureBufferControlIndex, captureBufferIndex }
- ::= { captureBufferTable 1 }
-
- CaptureBufferEntry ::= SEQUENCE {
- captureBufferControlIndex INTEGER (1..65535),
- captureBufferIndex INTEGER (1..2147483647),
- captureBufferPacketID INTEGER,
- captureBufferPacketData OCTET STRING,
- captureBufferPacketLength INTEGER,
- captureBufferPacketTime INTEGER,
- captureBufferPacketStatus INTEGER
- }
-
- captureBufferControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the bufferControlEntry with which
- this packet is associated."
- ::= { captureBufferEntry 1 }
-
- captureBufferIndex OBJECT-TYPE
- SYNTAX INTEGER (1..2147483647)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the captureBuffer table associated with a
- particular bufferControlEntry. This index will
- start at 1 and increase by one for each new packet
- added with the same captureBufferControlIndex.
-
- Should this value reach 2147483647, the next packet
- added with the same captureBufferControlIndex shall
- cause this value to wrap around to 1."
- ::= { captureBufferEntry 2 }
-
- captureBufferPacketID OBJECT-TYPE
- SYNTAX INTEGER
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that describes the order of packets
- that are received on a particular interface.
- The packetID of a packet captured on an
- interface is defined to be greater than the
- packetID's of all packets captured previously on
- the same interface. As the captureBufferPacketID
- object has a maximum positive value of 2^31 - 1,
- any captureBufferPacketID object shall have the
- value of the associated packet's packetID mod 2^31."
- ::= { captureBufferEntry 3 }
-
- captureBufferPacketData OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The data inside the packet, starting at the
- beginning of the packet plus any offset specified in
- the associated bufferControlDownloadOffset,
- including any link level headers. The length of the
- data in this object is the minimum of the length of
- the captured packet minus the offset, the length of
- the associated bufferControlCaptureSliceSize minus
- the offset, and the associated
- bufferControlDownloadSliceSize. If this minimum is
- less than zero, this object shall have a length of
- zero."
- ::= { captureBufferEntry 4 }
-
- captureBufferPacketLength OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The actual length (off the wire) of the packet stored
- in this entry, including FCS octets."
- ::= { captureBufferEntry 5 }
-
- captureBufferPacketTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of milliseconds that had passed since
- this capture buffer was first turned on when this
-
-
- packet was captured."
- ::= { captureBufferEntry 6 }
-
- captureBufferPacketStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A value which indicates the error status of this
- packet.
-
- The value of this object is defined in the same way as
- filterPktStatus. The value is a sum. This sum
- initially takes the value zero. Then, for each
- error, E, that has been discovered in this packet,
- 2 raised to a value representing E is added to the
- sum.
-
- The errors defined for a packet captured off of an
- Ethernet interface are as follows:
-
- bit # Error
- 0 Packet is longer than 1518 octets
- 1 Packet is shorter than 64 octets
- 2 Packet experienced a CRC or Alignment
- error
- 3 First packet in this capture buffer after
- it was detected that some packets were
- not processed correctly.
- 4 Packet's order in buffer is only
- approximate (May only be set for packets
- sent from the probe)
-
- For example, an Ethernet fragment would have a
- value of 6 (2^1 + 2^2).
-
- As this MIB is expanded to new media types, this
- object will have other media-specific errors defined."
- ::= { captureBufferEntry 7 }
-
-
- -- The Event Group
-
- -- Implementation of the Event group is optional.
- --
- -- The Event group controls the generation and notification
- -- of events from this device. Each entry in the eventTable
- -- describes the parameters of the event that can be
-
-
- -- triggered. Each event entry is fired by an associated
- -- condition located elsewhere in the MIB. An event entry
- -- may also be associated- with a function elsewhere in the
- -- MIB that will be executed when the event is generated. For
- -- example, a channel may be turned on or off by the firing
- -- of an event.
- --
- -- Each eventEntry may optionally specify that a log entry
- -- be created on its behalf whenever the event occurs.
- -- Each entry may also specify that notification should
- -- occur by way of SNMP trap messages. In this case, the
- -- community for the trap message is given in the associated
- -- eventCommunity object. The enterprise and specific trap
- -- fields of the trap are determined by the condition that
- -- triggered the event. Two traps are defined: risingAlarm
- -- and fallingAlarm. If the eventTable is triggered by a
- -- condition specified elsewhere, the enterprise and
- -- specific trap fields must be specified for traps
- -- generated for that condition.
-
- eventTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EventEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of events to be generated."
- ::= { event 1 }
-
- eventEntry OBJECT-TYPE
- SYNTAX EventEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters that describe an event to be
- generated when certain conditions are met. As an
- example, an instance of the eventLastTimeSent object
- might be named eventLastTimeSent.6"
- INDEX { eventIndex }
- ::= { eventTable 1 }
-
- EventEntry ::= SEQUENCE {
- eventIndex INTEGER (1..65535),
- eventDescription DisplayString (SIZE (0..127)),
- eventType INTEGER,
- eventCommunity OCTET STRING (SIZE (0..127)),
- eventLastTimeSent TimeTicks,
- eventOwner OwnerString,
- eventStatus EntryStatus
-
-
- }
-
- eventIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- event table. Each such entry defines one event that
- is to be generated when the appropriate conditions
- occur."
- ::= { eventEntry 1 }
-
- eventDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..127))
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A comment describing this event entry."
- ::= { eventEntry 2 }
-
- eventType OBJECT-TYPE
- SYNTAX INTEGER {
- none(1),
- log(2),
- snmp-trap(3), -- send an SNMP trap
- log-and-trap(4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The type of notification that the probe will make
- about this event. In the case of log, an entry is
- made in the log table for each event. In the case of
- snmp-trap, an SNMP trap is sent to one or more
- management stations."
- ::= { eventEntry 3 }
-
- eventCommunity OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (0..127))
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "If an SNMP trap is to be sent, it will be sent to
- the SNMP community specified by this octet string.
- In the future this table will be extended to include
- the party security mechanism. This object shall be
- set to a string of length zero if it is intended that
-
-
- that mechanism be used to specify the destination of
- the trap."
- ::= { eventEntry 4 }
-
- eventLastTimeSent OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime at the time this event
- entry last generated an event. If this entry has
- not generated any events, this value will be
- zero."
- ::= { eventEntry 5 }
-
- eventOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it.
-
- If this object contains a string starting with
- 'monitor' and has associated entries in the log
- table, all connected management stations should
- retrieve those log entries, as they may have
- significance to all management stations connected to
- this device"
- ::= { eventEntry 6 }
-
- eventStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this event entry.
-
- If this object is not equal to valid(1), all
- associated log entries shall be deleted by the
- agent."
- ::= { eventEntry 7 }
-
- --
- logTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LogEntry
- ACCESS not-accessible
- STATUS mandatory
-
-
- DESCRIPTION
- "A list of events that have been logged."
- ::= { event 2 }
-
- logEntry OBJECT-TYPE
- SYNTAX LogEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of data describing an event that has been
- logged. For example, an instance of the
- logDescription object might be named
- logDescription.6.47"
- INDEX { logEventIndex, logIndex }
- ::= { logTable 1 }
-
- LogEntry ::= SEQUENCE {
- logEventIndex INTEGER (1..65535),
- logIndex INTEGER (1..2147483647),
- logTime TimeTicks,
- logDescription DisplayString (SIZE (0..255))
- }
-
- logEventIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The event entry that generated this log
- entry. The log identified by a particular
- value of this index is associated with the same
- eventEntry as identified by the same value
- of eventIndex."
- ::= { logEntry 1 }
-
- logIndex OBJECT-TYPE
- SYNTAX INTEGER (1..2147483647)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the log table amongst those generated by the
- same eventEntries. These indexes are
- assigned beginning with 1 and increase by one
- with each new log entry. The association
- between values of logIndex and logEntries
- is fixed for the lifetime of each logEntry.
- The agent may choose to delete the oldest
-
-
- instances of logEntry as required because of
- lack of memory. It is an implementation-specific
- matter as to when this deletion may occur."
- ::= { logEntry 2 }
-
- logTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when this log entry was
- created."
- ::= { logEntry 3 }
-
- logDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..255))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An implementation dependent description of the
- event that activated this log entry."
- ::= { logEntry 4 }
-
- -- These definitions use the TRAP-TYPE macro as
- -- defined in RFC 1215 [10]
-
- -- Remote Network Monitoring Traps
-
- risingAlarm TRAP-TYPE
- ENTERPRISE rmon
- VARIABLES { alarmIndex, alarmVariable, alarmSampleType,
- alarmValue, alarmRisingThreshold }
- DESCRIPTION
- "The SNMP trap that is generated when an alarm
- entry crosses its rising threshold and generates
- an event that is configured for sending SNMP
- traps."
- ::= 1
-
- fallingAlarm TRAP-TYPE
- ENTERPRISE rmon
- VARIABLES { alarmIndex, alarmVariable, alarmSampleType,
- alarmValue, alarmFallingThreshold }
- DESCRIPTION
- "The SNMP trap that is generated when an alarm
- entry crosses its falling threshold and generates
- an event that is configured for sending SNMP
- traps."
-
-
- ::= 2
-
- END
+RMON-MIB DEFINITIONS ::= BEGIN
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+ NOTIFICATION-TYPE, mib-2, Counter32,
+ Integer32, TimeTicks FROM SNMPv2-SMI
+
+ TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC
+
+ MODULE-COMPLIANCE, OBJECT-GROUP,
+ NOTIFICATION-GROUP FROM SNMPv2-CONF;
+
+
+-- Remote Network Monitoring MIB
+
+rmonMibModule MODULE-IDENTITY
+ LAST-UPDATED "200005110000Z" -- 11 May, 2000
+ ORGANIZATION "IETF RMON MIB Working Group"
+ CONTACT-INFO
+ "Steve Waldbusser
+ Phone: +1-650-948-6500
+ Fax: +1-650-745-0671
+ DESCRIPTION
+ "Remote network monitoring devices, often called
+ monitors or probes, are instruments that exist for
+ the purpose of managing a network. This MIB defines
+ objects for managing remote network monitoring devices."
+
+ REVISION "200005110000Z" -- 11 May, 2000
+ DESCRIPTION
+ "Reformatted into SMIv2 format.
+
+ This version published as RFC 2819."
+
+ REVISION "199502010000Z" -- 1 Feb, 1995
+ DESCRIPTION
+ "Bug fixes, clarifications and minor changes based on
+ implementation experience, published as RFC1757 [18].
+
+ Two changes were made to object definitions:
+
+ 1) A new status bit has been defined for the
+ captureBufferPacketStatus object, indicating that the
+ packet order within the capture buffer may not be identical to
+ the packet order as received off the wire. This bit may only
+ be used for packets transmitted by the probe. Older NMS
+ applications can safely ignore this status bit, which might be
+ used by newer agents.
+
+ 2) The packetMatch trap has been removed. This trap was never
+ actually 'approved' and was not added to this document along
+ with the risingAlarm and fallingAlarm traps. The packetMatch
+ trap could not be throttled, which could cause disruption of
+ normal network traffic under some circumstances. An NMS should
+ configure a risingAlarm threshold on the appropriate
+ channelMatches instance if a trap is desired for a packetMatch
+ event. Note that logging of packetMatch events is still
+ supported--only trap generation for such events has been
+ removed.
+
+ In addition, several clarifications to individual object
+ definitions have been added to assist agent and NMS
+ implementors:
+
+ - global definition of 'good packets' and 'bad packets'
+
+ - more detailed text governing conceptual row creation and
+ modification
+
+ - instructions for probes relating to interface changes and
+ disruptions
+
+ - clarification of some ethernet counter definitions
+
+ - recommended formula for calculating network utilization
+
+ - clarification of channel and captureBuffer behavior for some
+ unusual conditions
+
+ - examples of proper instance naming for each table"
+
+ REVISION "199111010000Z" -- 1 Nov, 1991
+ DESCRIPTION
+ "The original version of this MIB, published as RFC1271."
+ ::= { rmonConformance 8 }
+
+ rmon OBJECT IDENTIFIER ::= { mib-2 16 }
+
+
+ -- textual conventions
+
+OwnerString ::= TEXTUAL-CONVENTION
+ STATUS current
+
+ DESCRIPTION
+ "This data type is used to model an administratively
+ assigned name of the owner of a resource. Implementations
+ must accept values composed of well-formed NVT ASCII
+ sequences. In addition, implementations should accept
+ values composed of well-formed UTF-8 sequences.
+
+ It is suggested that this name contain one or more of
+ the following: IP address, management station name,
+ network manager's name, location, or phone number.
+ In some cases the agent itself will be the owner of
+ an entry. In these cases, this string shall be set
+ to a string starting with 'monitor'.
+
+ SNMP access control is articulated entirely in terms
+ of the contents of MIB views; access to a particular
+ SNMP object instance depends only upon its presence
+ or absence in a particular MIB view and never upon
+ its value or the value of related object instances.
+ Thus, objects of this type afford resolution of
+ resource contention only among cooperating
+ managers; they realize no access control function
+ with respect to uncooperative parties."
+ SYNTAX OCTET STRING (SIZE (0..127))
+
+EntryStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The status of a table entry.
+
+ Setting this object to the value invalid(4) has the
+ effect of invalidating the corresponding entry.
+ That is, it effectively disassociates the mapping
+ identified with said entry.
+ It is an implementation-specific matter as to whether
+ the agent removes an invalidated entry from the table.
+ Accordingly, management stations must be prepared to
+ receive tabular information from agents that corresponds
+ to entries currently not in use. Proper
+ interpretation of such entries requires examination
+ of the relevant EntryStatus object.
+
+ An existing instance of this object cannot be set to
+ createRequest(2). This object may only be set to
+ createRequest(2) when this instance is created. When
+ this object is created, the agent may wish to create
+ supplemental object instances with default values
+ to complete a conceptual row in this table. Because the
+ creation of these default objects is entirely at the option
+ of the agent, the manager must not assume that any will be
+ created, but may make use of any that are created.
+ Immediately after completing the create operation, the agent
+ must set this object to underCreation(3).
+
+ When in the underCreation(3) state, an entry is allowed to
+ exist in a possibly incomplete, possibly inconsistent state,
+ usually to allow it to be modified in multiple PDUs. When in
+ this state, an entry is not fully active.
+ Entries shall exist in the underCreation(3) state until
+ the management station is finished configuring the entry
+ and sets this object to valid(1) or aborts, setting this
+ object to invalid(4). If the agent determines that an
+ entry has been in the underCreation(3) state for an
+ abnormally long time, it may decide that the management
+ station has crashed. If the agent makes this decision,
+ it may set this object to invalid(4) to reclaim the
+ entry. A prudent agent will understand that the
+ management station may need to wait for human input
+ and will allow for that possibility in its
+ determination of this abnormally long period.
+
+ An entry in the valid(1) state is fully configured and
+ consistent and fully represents the configuration or
+ operation such a row is intended to represent. For
+ example, it could be a statistical function that is
+ configured and active, or a filter that is available
+ in the list of filters processed by the packet capture
+ process.
+
+ A manager is restricted to changing the state of an entry in
+ the following ways:
+
+ To: valid createRequest underCreation invalid
+ From:
+ valid OK NO OK OK
+ createRequest N/A N/A N/A N/A
+ underCreation OK NO OK OK
+ invalid NO NO NO OK
+ nonExistent NO OK NO OK
+
+ In the table above, it is not applicable to move the state
+ from the createRequest state to any other state because the
+ manager will never find the variable in that state. The
+ nonExistent state is not a value of the enumeration, rather
+ it means that the entryStatus variable does not exist at all.
+
+ An agent may allow an entryStatus variable to change state in
+ additional ways, so long as the semantics of the states are
+ followed. This allowance is made to ease the implementation of
+ the agent and is made despite the fact that managers should
+ never exercise these additional state transitions."
+ SYNTAX INTEGER {
+ valid(1),
+ createRequest(2),
+ underCreation(3),
+ invalid(4)
+ }
+
+ statistics OBJECT IDENTIFIER ::= { rmon 1 }
+ history OBJECT IDENTIFIER ::= { rmon 2 }
+ alarm OBJECT IDENTIFIER ::= { rmon 3 }
+ hosts OBJECT IDENTIFIER ::= { rmon 4 }
+ hostTopN OBJECT IDENTIFIER ::= { rmon 5 }
+ matrix OBJECT IDENTIFIER ::= { rmon 6 }
+ filter OBJECT IDENTIFIER ::= { rmon 7 }
+ capture OBJECT IDENTIFIER ::= { rmon 8 }
+ event OBJECT IDENTIFIER ::= { rmon 9 }
+ rmonConformance OBJECT IDENTIFIER ::= { rmon 20 }
+
+-- The Ethernet Statistics Group
+--
+-- Implementation of the Ethernet Statistics group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The ethernet statistics group contains statistics measured by the
+-- probe for each monitored interface on this device. These
+-- statistics take the form of free running counters that start from
+-- zero when a valid entry is created.
+--
+-- This group currently has statistics defined only for
+-- Ethernet interfaces. Each etherStatsEntry contains statistics
+-- for one Ethernet interface. The probe must create one
+-- etherStats entry for each monitored Ethernet interface
+-- on the device.
+
+etherStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EtherStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of Ethernet statistics entries."
+ ::= { statistics 1 }
+
+etherStatsEntry OBJECT-TYPE
+ SYNTAX EtherStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics kept for a particular
+ Ethernet interface. As an example, an instance of the
+ etherStatsPkts object might be named etherStatsPkts.1"
+ INDEX { etherStatsIndex }
+ ::= { etherStatsTable 1 }
+
+EtherStatsEntry ::= SEQUENCE {
+ etherStatsIndex Integer32,
+ etherStatsDataSource OBJECT IDENTIFIER,
+ etherStatsDropEvents Counter32,
+ etherStatsOctets Counter32,
+ etherStatsPkts Counter32,
+ etherStatsBroadcastPkts Counter32,
+ etherStatsMulticastPkts Counter32,
+ etherStatsCRCAlignErrors Counter32,
+ etherStatsUndersizePkts Counter32,
+ etherStatsOversizePkts Counter32,
+ etherStatsFragments Counter32,
+ etherStatsJabbers Counter32,
+ etherStatsCollisions Counter32,
+ etherStatsPkts64Octets Counter32,
+ etherStatsPkts65to127Octets Counter32,
+ etherStatsPkts128to255Octets Counter32,
+ etherStatsPkts256to511Octets Counter32,
+ etherStatsPkts512to1023Octets Counter32,
+ etherStatsPkts1024to1518Octets Counter32,
+ etherStatsOwner OwnerString,
+ etherStatsStatus EntryStatus
+}
+
+etherStatsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of this object uniquely identifies this
+ etherStats entry."
+ ::= { etherStatsEntry 1 }
+
+etherStatsDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "This object identifies the source of the data that
+ this etherStats entry is configured to analyze. This
+ source can be any ethernet interface on this device.
+ In order to identify a particular interface, this object
+ shall identify the instance of the ifIndex object,
+ defined in RFC 2233 [17], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ etherStatsStatus object is equal to valid(1)."
+ ::= { etherStatsEntry 2 }
+
+etherStatsDropEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of events in which packets
+ were dropped by the probe due to lack of resources.
+ Note that this number is not necessarily the number of
+ packets dropped; it is just the number of times this
+ condition has been detected."
+ ::= { etherStatsEntry 3 }
+
+etherStatsOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of octets of data (including
+ those in bad packets) received on the
+ network (excluding framing bits but including
+ FCS octets).
+
+ This object can be used as a reasonable estimate of
+ 10-Megabit ethernet utilization. If greater precision is
+ desired, the etherStatsPkts and etherStatsOctets objects
+ should be sampled before and after a common interval. The
+ differences in the sampled values are Pkts and Octets,
+ respectively, and the number of seconds in the interval is
+ Interval. These values are used to calculate the Utilization
+ as follows:
+
+ Pkts * (9.6 + 6.4) + (Octets * .8)
+ Utilization = -------------------------------------
+ Interval * 10,000
+
+ The result of this equation is the value Utilization which
+ is the percent utilization of the ethernet segment on a
+ scale of 0 to 100 percent."
+ ::= { etherStatsEntry 4 }
+
+etherStatsPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad packets,
+ broadcast packets, and multicast packets) received."
+ ::= { etherStatsEntry 5 }
+
+etherStatsBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of good packets received that were
+ directed to the broadcast address. Note that this
+ does not include multicast packets."
+ ::= { etherStatsEntry 6 }
+
+etherStatsMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of good packets received that were
+ directed to a multicast address. Note that this number
+ does not include packets directed to the broadcast
+ address."
+ ::= { etherStatsEntry 7 }
+
+etherStatsCRCAlignErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that
+ had a length (excluding framing bits, but
+ including FCS octets) of between 64 and 1518
+ octets, inclusive, but had either a bad
+ Frame Check Sequence (FCS) with an integral
+ number of octets (FCS Error) or a bad FCS with
+ a non-integral number of octets (Alignment Error)."
+ ::= { etherStatsEntry 8 }
+
+etherStatsUndersizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were
+ less than 64 octets long (excluding framing bits,
+ but including FCS octets) and were otherwise well
+ formed."
+ ::= { etherStatsEntry 9 }
+
+etherStatsOversizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were
+ longer than 1518 octets (excluding framing bits,
+ but including FCS octets) and were otherwise
+ well formed."
+ ::= { etherStatsEntry 10 }
+
+etherStatsFragments OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were less than
+ 64 octets in length (excluding framing bits but including
+ FCS octets) and had either a bad Frame Check Sequence
+ (FCS) with an integral number of octets (FCS Error) or a
+ bad FCS with a non-integral number of octets (Alignment
+ Error).
+
+ Note that it is entirely normal for etherStatsFragments to
+ increment. This is because it counts both runts (which are
+ normal occurrences due to collisions) and noise hits."
+ ::= { etherStatsEntry 11 }
+
+etherStatsJabbers OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were
+ longer than 1518 octets (excluding framing bits,
+ but including FCS octets), and had either a bad
+ Frame Check Sequence (FCS) with an integral number
+ of octets (FCS Error) or a bad FCS with a non-integral
+ number of octets (Alignment Error).
+
+ Note that this definition of jabber is different
+ than the definition in IEEE-802.3 section 8.2.1.5
+ (10BASE5) and section 10.3.1.4 (10BASE2). These
+ documents define jabber as the condition where any
+ packet exceeds 20 ms. The allowed range to detect
+ jabber is between 20 ms and 150 ms."
+ ::= { etherStatsEntry 12 }
+
+etherStatsCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Collisions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The best estimate of the total number of collisions
+ on this Ethernet segment.
+
+ The value returned will depend on the location of the
+ RMON probe. Section 8.2.1.3 (10BASE-5) and section
+ 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
+ station must detect a collision, in the receive mode, if
+ three or more stations are transmitting simultaneously. A
+ repeater port must detect a collision when two or more
+ stations are transmitting simultaneously. Thus a probe
+ placed on a repeater port could record more collisions
+ than a probe connected to a station on the same segment
+ would.
+
+ Probe location plays a much smaller role when considering
+ 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
+ defines a collision as the simultaneous presence of signals
+ on the DO and RD circuits (transmitting and receiving
+ at the same time). A 10BASE-T station can only detect
+ collisions when it is transmitting. Thus probes placed on
+ a station and a repeater, should report the same number of
+ collisions.
+
+ Note also that an RMON probe inside a repeater should
+ ideally report collisions between the repeater and one or
+ more other hosts (transmit collisions as defined by IEEE
+ 802.3k) plus receiver collisions observed on any coax
+ segments to which the repeater is connected."
+ ::= { etherStatsEntry 13 }
+
+etherStatsPkts64Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were 64 octets in length
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 14 }
+
+etherStatsPkts65to127Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 65 and 127 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 15 }
+
+etherStatsPkts128to255Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 128 and 255 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 16 }
+
+etherStatsPkts256to511Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 256 and 511 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 17 }
+
+etherStatsPkts512to1023Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 512 and 1023 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 18 }
+
+etherStatsPkts1024to1518Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 1024 and 1518 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 19 }
+
+etherStatsOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { etherStatsEntry 20 }
+
+etherStatsStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this etherStats entry."
+ ::= { etherStatsEntry 21 }
+
+-- The History Control Group
+
+-- Implementation of the History Control group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The history control group controls the periodic statistical
+-- sampling of data from various types of networks. The
+-- historyControlTable stores configuration entries that each
+-- define an interface, polling period, and other parameters.
+-- Once samples are taken, their data is stored in an entry
+-- in a media-specific table. Each such entry defines one
+-- sample, and is associated with the historyControlEntry that
+-- caused the sample to be taken. Each counter in the
+-- etherHistoryEntry counts the same event as its similarly-named
+-- counterpart in the etherStatsEntry, except that each value here
+-- is a cumulative sum during a sampling period.
+--
+-- If the probe keeps track of the time of day, it should start
+-- the first sample of the history at a time such that
+-- when the next hour of the day begins, a sample is
+-- started at that instant. This tends to make more
+-- user-friendly reports, and enables comparison of reports
+-- from different probes that have relatively accurate time
+-- of day.
+--
+-- The probe is encouraged to add two history control entries
+-- per monitored interface upon initialization that describe a short
+-- term and a long term polling period. Suggested parameters are 30
+-- seconds for the short term polling period and 30 minutes for
+-- the long term period.
+
+historyControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HistoryControlEntry
+ MAX-ACCESS not-accessible
+
+ STATUS current
+ DESCRIPTION
+ "A list of history control entries."
+ ::= { history 1 }
+
+historyControlEntry OBJECT-TYPE
+ SYNTAX HistoryControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up a periodic sampling of
+ statistics. As an example, an instance of the
+ historyControlInterval object might be named
+ historyControlInterval.2"
+ INDEX { historyControlIndex }
+ ::= { historyControlTable 1 }
+
+HistoryControlEntry ::= SEQUENCE {
+ historyControlIndex Integer32,
+ historyControlDataSource OBJECT IDENTIFIER,
+ historyControlBucketsRequested Integer32,
+ historyControlBucketsGranted Integer32,
+ historyControlInterval Integer32,
+ historyControlOwner OwnerString,
+ historyControlStatus EntryStatus
+}
+
+historyControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ historyControl table. Each such entry defines a
+ set of samples at a particular interval for an
+ interface on the device."
+ ::= { historyControlEntry 1 }
+
+historyControlDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the source of the data for
+ which historical data was collected and
+ placed in a media-specific table on behalf of this
+ historyControlEntry. This source can be any
+ interface on this device. In order to identify
+ a particular interface, this object shall identify
+ the instance of the ifIndex object, defined
+ in RFC 2233 [17], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ historyControlStatus object is equal to valid(1)."
+ ::= { historyControlEntry 2 }
+
+historyControlBucketsRequested OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The requested number of discrete time intervals
+ over which data is to be saved in the part of the
+ media-specific table associated with this
+ historyControlEntry.
+
+ When this object is created or modified, the probe
+ should set historyControlBucketsGranted as closely to
+ this object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 50 }
+ ::= { historyControlEntry 3 }
+
+historyControlBucketsGranted OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of discrete sampling intervals
+ over which data shall be saved in the part of
+ the media-specific table associated with this
+ historyControlEntry.
+
+ When the associated historyControlBucketsRequested
+ object is created or modified, the probe
+ should set this object as closely to the requested
+ value as is possible for the particular
+ probe implementation and available resources. The
+ probe must not lower this value except as a result
+ of a modification to the associated
+ historyControlBucketsRequested object.
+
+ There will be times when the actual number of
+ buckets associated with this entry is less than
+ the value of this object. In this case, at the
+ end of each sampling interval, a new bucket will
+ be added to the media-specific table.
+
+ When the number of buckets reaches the value of
+ this object and a new bucket is to be added to the
+ media-specific table, the oldest bucket associated
+ with this historyControlEntry shall be deleted by
+ the agent so that the new bucket can be added.
+
+ When the value of this object changes to a value less
+ than the current value, entries are deleted
+ from the media-specific table associated with this
+ historyControlEntry. Enough of the oldest of these
+ entries shall be deleted by the agent so that their
+ number remains less than or equal to the new value of
+ this object.
+
+ When the value of this object changes to a value greater
+ than the current value, the number of associated media-
+ specific entries may be allowed to grow."
+ ::= { historyControlEntry 4 }
+
+historyControlInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..3600)
+ UNITS "Seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interval in seconds over which the data is
+ sampled for each bucket in the part of the
+ media-specific table associated with this
+ historyControlEntry. This interval can
+ be set to any number of seconds between 1 and
+ 3600 (1 hour).
+
+ Because the counters in a bucket may overflow at their
+ maximum value with no indication, a prudent manager will
+ take into account the possibility of overflow in any of
+ the associated counters. It is important to consider the
+ minimum time in which any counter could overflow on a
+ particular media type and set the historyControlInterval
+ object to a value less than this interval. This is
+ typically most important for the 'octets' counter in any
+ media-specific table. For example, on an Ethernet
+ network, the etherHistoryOctets counter could overflow
+ in about one hour at the Ethernet's maximum
+ utilization.
+
+ This object may not be modified if the associated
+ historyControlStatus object is equal to valid(1)."
+ DEFVAL { 1800 }
+ ::= { historyControlEntry 5 }
+
+historyControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { historyControlEntry 6 }
+
+historyControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this historyControl entry.
+
+ Each instance of the media-specific table associated
+ with this historyControlEntry will be deleted by the agent
+ if this historyControlEntry is not equal to valid(1)."
+ ::= { historyControlEntry 7 }
+
+-- The Ethernet History Group
+
+-- Implementation of the Ethernet History group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Ethernet History group records periodic statistical samples
+-- from a network and stores them for later retrieval.
+-- Once samples are taken, their data is stored in an entry
+-- in a media-specific table. Each such entry defines one
+-- sample, and is associated with the historyControlEntry that
+-- caused the sample to be taken. This group defines the
+-- etherHistoryTable, for Ethernet networks.
+--
+
+etherHistoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EtherHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of Ethernet history entries."
+ ::= { history 2 }
+
+etherHistoryEntry OBJECT-TYPE
+ SYNTAX EtherHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An historical sample of Ethernet statistics on a particular
+ Ethernet interface. This sample is associated with the
+ historyControlEntry which set up the parameters for
+ a regular collection of these samples. As an example, an
+ instance of the etherHistoryPkts object might be named
+ etherHistoryPkts.2.89"
+ INDEX { etherHistoryIndex , etherHistorySampleIndex }
+ ::= { etherHistoryTable 1 }
+
+EtherHistoryEntry ::= SEQUENCE {
+ etherHistoryIndex Integer32,
+ etherHistorySampleIndex Integer32,
+ etherHistoryIntervalStart TimeTicks,
+ etherHistoryDropEvents Counter32,
+ etherHistoryOctets Counter32,
+ etherHistoryPkts Counter32,
+ etherHistoryBroadcastPkts Counter32,
+ etherHistoryMulticastPkts Counter32,
+ etherHistoryCRCAlignErrors Counter32,
+ etherHistoryUndersizePkts Counter32,
+ etherHistoryOversizePkts Counter32,
+ etherHistoryFragments Counter32,
+ etherHistoryJabbers Counter32,
+ etherHistoryCollisions Counter32,
+ etherHistoryUtilization Integer32
+}
+
+etherHistoryIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The history of which this entry is a part. The
+ history identified by a particular value of this
+ index is the same history as identified
+ by the same value of historyControlIndex."
+ ::= { etherHistoryEntry 1 }
+
+etherHistorySampleIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies the particular
+ sample this entry represents among all samples
+ associated with the same historyControlEntry.
+ This index starts at 1 and increases by one
+ as each new sample is taken."
+ ::= { etherHistoryEntry 2 }
+
+etherHistoryIntervalStart OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the start of the interval
+ over which this sample was measured. If the probe
+ keeps track of the time of day, it should start
+ the first sample of the history at a time such that
+ when the next hour of the day begins, a sample is
+ started at that instant. Note that following this
+ rule may require the probe to delay collecting the
+ first sample of the history, as each sample must be
+ of the same interval. Also note that the sample which
+ is currently being collected is not accessible in this
+ table until the end of its interval."
+ ::= { etherHistoryEntry 3 }
+
+etherHistoryDropEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of events in which packets
+ were dropped by the probe due to lack of resources
+ during this sampling interval. Note that this number
+ is not necessarily the number of packets dropped, it
+ is just the number of times this condition has been
+ detected."
+ ::= { etherHistoryEntry 4 }
+
+etherHistoryOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of octets of data (including
+ those in bad packets) received on the
+ network (excluding framing bits but including
+ FCS octets)."
+ ::= { etherHistoryEntry 5 }
+
+etherHistoryPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets (including bad packets)
+ received during this sampling interval."
+ ::= { etherHistoryEntry 6 }
+
+etherHistoryBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets received during this
+ sampling interval that were directed to the
+ broadcast address."
+ ::= { etherHistoryEntry 7 }
+
+etherHistoryMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets received during this
+ sampling interval that were directed to a
+ multicast address. Note that this number does not
+ include packets addressed to the broadcast address."
+ ::= { etherHistoryEntry 8 }
+
+etherHistoryCRCAlignErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that had a length (excluding
+ framing bits but including FCS octets) between
+ 64 and 1518 octets, inclusive, but had either a bad Frame
+ Check Sequence (FCS) with an integral number of octets
+ (FCS Error) or a bad FCS with a non-integral number
+ of octets (Alignment Error)."
+ ::= { etherHistoryEntry 9 }
+
+etherHistoryUndersizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that were less than 64 octets
+ long (excluding framing bits but including FCS
+ octets) and were otherwise well formed."
+ ::= { etherHistoryEntry 10 }
+
+etherHistoryOversizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that were longer than 1518
+ octets (excluding framing bits but including
+ FCS octets) but were otherwise well formed."
+ ::= { etherHistoryEntry 11 }
+
+etherHistoryFragments OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received during this
+ sampling interval that were less than 64 octets in
+ length (excluding framing bits but including FCS
+ octets) had either a bad Frame Check Sequence (FCS)
+ with an integral number of octets (FCS Error) or a bad
+ FCS with a non-integral number of octets (Alignment
+ Error).
+
+ Note that it is entirely normal for etherHistoryFragments to
+ increment. This is because it counts both runts (which are
+ normal occurrences due to collisions) and noise hits."
+ ::= { etherHistoryEntry 12 }
+
+etherHistoryJabbers OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that were longer than 1518 octets
+ (excluding framing bits but including FCS octets),
+ and had either a bad Frame Check Sequence (FCS)
+ with an integral number of octets (FCS Error) or
+ a bad FCS with a non-integral number of octets
+ (Alignment Error).
+
+ Note that this definition of jabber is different
+ than the definition in IEEE-802.3 section 8.2.1.5
+ (10BASE5) and section 10.3.1.4 (10BASE2). These
+ documents define jabber as the condition where any
+ packet exceeds 20 ms. The allowed range to detect
+ jabber is between 20 ms and 150 ms."
+ ::= { etherHistoryEntry 13 }
+
+etherHistoryCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Collisions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The best estimate of the total number of collisions
+ on this Ethernet segment during this sampling
+ interval.
+
+ The value returned will depend on the location of the
+ RMON probe. Section 8.2.1.3 (10BASE-5) and section
+ 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
+ station must detect a collision, in the receive mode, if
+ three or more stations are transmitting simultaneously. A
+ repeater port must detect a collision when two or more
+ stations are transmitting simultaneously. Thus a probe
+ placed on a repeater port could record more collisions
+ than a probe connected to a station on the same segment
+ would.
+
+ Probe location plays a much smaller role when considering
+ 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
+ defines a collision as the simultaneous presence of signals
+ on the DO and RD circuits (transmitting and receiving
+ at the same time). A 10BASE-T station can only detect
+ collisions when it is transmitting. Thus probes placed on
+ a station and a repeater, should report the same number of
+ collisions.
+
+ Note also that an RMON probe inside a repeater should
+ ideally report collisions between the repeater and one or
+ more other hosts (transmit collisions as defined by IEEE
+ 802.3k) plus receiver collisions observed on any coax
+ segments to which the repeater is connected."
+ ::= { etherHistoryEntry 14 }
+
+etherHistoryUtilization OBJECT-TYPE
+ SYNTAX Integer32 (0..10000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The best estimate of the mean physical layer
+ network utilization on this interface during this
+ sampling interval, in hundredths of a percent."
+ ::= { etherHistoryEntry 15 }
+
+-- The Alarm Group
+
+-- Implementation of the Alarm group is optional. The Alarm Group
+-- requires the implementation of the Event group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Alarm group periodically takes statistical samples from
+-- variables in the probe and compares them to thresholds that have
+-- been configured. The alarm table stores configuration
+-- entries that each define a variable, polling period, and
+-- threshold parameters. If a sample is found to cross the
+-- threshold values, an event is generated. Only variables that
+-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
+-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
+-- this way.
+--
+-- This function has a hysteresis mechanism to limit the generation
+-- of events. This mechanism generates one event as a threshold
+-- is crossed in the appropriate direction. No more events are
+-- generated for that threshold until the opposite threshold is
+-- crossed.
+--
+-- In the case of a sampling a deltaValue, a probe may implement
+-- this mechanism with more precision if it takes a delta sample
+-- twice per period, each time comparing the sum of the latest two
+-- samples to the threshold. This allows the detection of threshold
+-- crossings that span the sampling boundary. Note that this does
+-- not require any special configuration of the threshold value.
+-- It is suggested that probes implement this more precise algorithm.
+
+alarmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of alarm entries."
+ ::= { alarm 1 }
+
+alarmEntry OBJECT-TYPE
+ SYNTAX AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up a periodic checking
+ for alarm conditions. For example, an instance of the
+ alarmValue object might be named alarmValue.8"
+ INDEX { alarmIndex }
+ ::= { alarmTable 1 }
+
+AlarmEntry ::= SEQUENCE {
+ alarmIndex Integer32,
+ alarmInterval Integer32,
+ alarmVariable OBJECT IDENTIFIER,
+ alarmSampleType INTEGER,
+ alarmValue Integer32,
+ alarmStartupAlarm INTEGER,
+ alarmRisingThreshold Integer32,
+ alarmFallingThreshold Integer32,
+ alarmRisingEventIndex Integer32,
+ alarmFallingEventIndex Integer32,
+ alarmOwner OwnerString,
+ alarmStatus EntryStatus
+}
+
+alarmIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ alarm table. Each such entry defines a
+ diagnostic sample at a particular interval
+ for an object on the device."
+ ::= { alarmEntry 1 }
+
+alarmInterval OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interval in seconds over which the data is
+ sampled and compared with the rising and falling
+ thresholds. When setting this variable, care
+ should be taken in the case of deltaValue
+ sampling - the interval should be set short enough
+ that the sampled variable is very unlikely to
+ increase or decrease by more than 2^31 - 1 during
+ a single sampling interval.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 2 }
+
+alarmVariable OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object identifier of the particular variable to be
+ sampled. Only variables that resolve to an ASN.1 primitive
+ type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
+ Gauge, or TimeTicks) may be sampled.
+
+ Because SNMP access control is articulated entirely
+ in terms of the contents of MIB views, no access
+ control mechanism exists that can restrict the value of
+ this object to identify only those objects that exist
+ in a particular MIB view. Because there is thus no
+ acceptable means of restricting the read access that
+ could be obtained through the alarm mechanism, the
+ probe must only grant write access to this object in
+ those views that have read access to all objects on
+ the probe.
+
+ During a set operation, if the supplied variable name is
+ not available in the selected MIB view, a badValue error
+ must be returned. If at any time the variable name of
+ an established alarmEntry is no longer available in the
+ selected MIB view, the probe must change the status of
+ this alarmEntry to invalid(4).
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 3 }
+
+alarmSampleType OBJECT-TYPE
+ SYNTAX INTEGER {
+ absoluteValue(1),
+ deltaValue(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The method of sampling the selected variable and
+ calculating the value to be compared against the
+ thresholds. If the value of this object is
+ absoluteValue(1), the value of the selected variable
+ will be compared directly with the thresholds at the
+ end of the sampling interval. If the value of this
+ object is deltaValue(2), the value of the selected
+ variable at the last sample will be subtracted from
+ the current value, and the difference compared with
+ the thresholds.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 4 }
+
+alarmValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the statistic during the last sampling
+ period. For example, if the sample type is deltaValue,
+ this value will be the difference between the samples
+ at the beginning and end of the period. If the sample
+ type is absoluteValue, this value will be the sampled
+ value at the end of the period.
+ This is the value that is compared with the rising and
+ falling thresholds.
+
+ The value during the current sampling period is not
+ made available until the period is completed and will
+ remain available until the next period completes."
+ ::= { alarmEntry 5 }
+
+alarmStartupAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ risingAlarm(1),
+ fallingAlarm(2),
+ risingOrFallingAlarm(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The alarm that may be sent when this entry is first
+ set to valid. If the first sample after this entry
+ becomes valid is greater than or equal to the
+ risingThreshold and alarmStartupAlarm is equal to
+ risingAlarm(1) or risingOrFallingAlarm(3), then a single
+ rising alarm will be generated. If the first sample
+ after this entry becomes valid is less than or equal
+ to the fallingThreshold and alarmStartupAlarm is equal
+ to fallingAlarm(2) or risingOrFallingAlarm(3), then a
+ single falling alarm will be generated.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 6 }
+
+alarmRisingThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the sampled statistic. When the current
+ sampled value is greater than or equal to this threshold,
+ and the value at the last sampling interval was less than
+ this threshold, a single event will be generated.
+ A single event will also be generated if the first
+ sample after this entry becomes valid is greater than or
+ equal to this threshold and the associated
+ alarmStartupAlarm is equal to risingAlarm(1) or
+ risingOrFallingAlarm(3).
+
+ After a rising event is generated, another such event
+ will not be generated until the sampled value
+ falls below this threshold and reaches the
+ alarmFallingThreshold.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 7 }
+
+alarmFallingThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the sampled statistic. When the current
+ sampled value is less than or equal to this threshold,
+ and the value at the last sampling interval was greater than
+ this threshold, a single event will be generated.
+ A single event will also be generated if the first
+ sample after this entry becomes valid is less than or
+ equal to this threshold and the associated
+ alarmStartupAlarm is equal to fallingAlarm(2) or
+ risingOrFallingAlarm(3).
+
+ After a falling event is generated, another such event
+ will not be generated until the sampled value
+ rises above this threshold and reaches the
+ alarmRisingThreshold.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 8 }
+
+alarmRisingEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The index of the eventEntry that is
+ used when a rising threshold is crossed. The
+ eventEntry identified by a particular value of
+ this index is the same as identified by the same value
+ of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then
+ no association exists. In particular, if this value
+ is zero, no associated event will be generated, as
+ zero is not a valid event index.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 9 }
+
+alarmFallingEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The index of the eventEntry that is
+ used when a falling threshold is crossed. The
+ eventEntry identified by a particular value of
+ this index is the same as identified by the same value
+ of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then
+ no association exists. In particular, if this value
+ is zero, no associated event will be generated, as
+ zero is not a valid event index.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 10 }
+
+alarmOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { alarmEntry 11 }
+
+alarmStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this alarm entry."
+ ::= { alarmEntry 12 }
+
+-- The Host Group
+
+-- Implementation of the Host group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The host group discovers new hosts on the network by
+-- keeping a list of source and destination MAC Addresses seen
+-- in good packets. For each of these addresses, the host group
+-- keeps a set of statistics. The hostControlTable controls
+-- which interfaces this function is performed on, and contains
+-- some information about the process. On behalf of each
+-- hostControlEntry, data is collected on an interface and placed
+-- in both the hostTable and the hostTimeTable. If the
+-- monitoring device finds itself short of resources, it may
+-- delete entries as needed. It is suggested that the device
+-- delete the least recently used entries first.
+
+-- The hostTable contains entries for each address discovered on
+-- a particular interface. Each entry contains statistical
+-- data about that host. This table is indexed by the
+-- MAC address of the host, through which a random access
+-- may be achieved.
+
+-- The hostTimeTable contains data in the same format as the
+-- hostTable, and must contain the same set of hosts, but is
+-- indexed using hostTimeCreationOrder rather than hostAddress.
+-- The hostTimeCreationOrder is an integer which reflects
+-- the relative order in which a particular entry was discovered
+-- and thus inserted into the table. As this order, and thus
+-- the index, is among those entries currently in the table,
+-- the index for a particular entry may change if an
+-- (earlier) entry is deleted. Thus the association between
+-- hostTimeCreationOrder and hostTimeEntry may be broken at
+-- any time.
+
+-- The hostTimeTable has two important uses. The first is the
+-- fast download of this potentially large table. Because the
+-- index of this table runs from 1 to the size of the table,
+-- inclusive, its values are predictable. This allows very
+-- efficient packing of variables into SNMP PDU's and allows
+-- a table transfer to have multiple packets outstanding.
+-- These benefits increase transfer rates tremendously.
+
+-- The second use of the hostTimeTable is the efficient discovery
+-- by the management station of new entries added to the table.
+-- After the management station has downloaded the entire table,
+-- it knows that new entries will be added immediately after the
+-- end of the current table. It can thus detect new entries there
+-- and retrieve them easily.
+
+-- Because the association between hostTimeCreationOrder and
+-- hostTimeEntry may be broken at any time, the management
+-- station must monitor the related hostControlLastDeleteTime
+-- object. When the management station thus detects a deletion,
+-- it must assume that any such associations have been broken,
+-- and invalidate any it has stored locally. This includes
+-- restarting any download of the hostTimeTable that may have been
+-- in progress, as well as rediscovering the end of the
+-- hostTimeTable so that it may detect new entries. If the
+-- management station does not detect the broken association,
+-- it may continue to refer to a particular host by its
+-- creationOrder while unwittingly retrieving the data associated
+-- with another host entirely. If this happens while downloading
+-- the host table, the management station may fail to download
+-- all of the entries in the table.
+
+
+hostControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of host table control entries."
+ ::= { hosts 1 }
+
+hostControlEntry OBJECT-TYPE
+ SYNTAX HostControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up the discovery of hosts
+ on a particular interface and the collection of statistics
+ about these hosts. For example, an instance of the
+ hostControlTableSize object might be named
+ hostControlTableSize.1"
+ INDEX { hostControlIndex }
+ ::= { hostControlTable 1 }
+
+HostControlEntry ::= SEQUENCE {
+
+ hostControlIndex Integer32,
+ hostControlDataSource OBJECT IDENTIFIER,
+ hostControlTableSize Integer32,
+ hostControlLastDeleteTime TimeTicks,
+ hostControlOwner OwnerString,
+ hostControlStatus EntryStatus
+}
+
+hostControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ hostControl table. Each such entry defines
+ a function that discovers hosts on a particular interface
+ and places statistics about them in the hostTable and
+ the hostTimeTable on behalf of this hostControlEntry."
+ ::= { hostControlEntry 1 }
+
+hostControlDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the source of the data for
+ this instance of the host function. This source
+ can be any interface on this device. In order
+ to identify a particular interface, this object shall
+ identify the instance of the ifIndex object, defined
+ in RFC 2233 [17], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ hostControlStatus object is equal to valid(1)."
+ ::= { hostControlEntry 2 }
+
+hostControlTableSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of hostEntries in the hostTable and the
+ hostTimeTable associated with this hostControlEntry."
+ ::= { hostControlEntry 3 }
+
+hostControlLastDeleteTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the last entry
+ was deleted from the portion of the hostTable
+ associated with this hostControlEntry. If no
+ deletions have occurred, this value shall be zero."
+ ::= { hostControlEntry 4 }
+
+hostControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { hostControlEntry 5 }
+
+hostControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this hostControl entry.
+
+ If this object is not equal to valid(1), all associated
+ entries in the hostTable, hostTimeTable, and the
+ hostTopNTable shall be deleted by the agent."
+ ::= { hostControlEntry 6 }
+
+hostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of host entries."
+ ::= { hosts 2 }
+
+hostEntry OBJECT-TYPE
+ SYNTAX HostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for a particular host that has
+ been discovered on an interface of this device. For example,
+ an instance of the hostOutBroadcastPkts object might be
+ named hostOutBroadcastPkts.1.6.8.0.32.27.3.176"
+ INDEX { hostIndex, hostAddress }
+ ::= { hostTable 1 }
+
+HostEntry ::= SEQUENCE {
+ hostAddress OCTET STRING,
+ hostCreationOrder Integer32,
+ hostIndex Integer32,
+ hostInPkts Counter32,
+ hostOutPkts Counter32,
+ hostInOctets Counter32,
+ hostOutOctets Counter32,
+ hostOutErrors Counter32,
+ hostOutBroadcastPkts Counter32,
+ hostOutMulticastPkts Counter32
+}
+
+hostAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical address of this host."
+ ::= { hostEntry 1 }
+
+hostCreationOrder OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that defines the relative ordering of
+ the creation time of hosts captured for a
+ particular hostControlEntry. This index shall
+ be between 1 and N, where N is the value of
+ the associated hostControlTableSize. The ordering
+ of the indexes is based on the order of each entry's
+ insertion into the table, in which entries added earlier
+ have a lower index value than entries added later.
+
+ It is important to note that the order for a
+ particular entry may change as an (earlier) entry
+ is deleted from the table. Because this order may
+ change, management stations should make use of the
+ hostControlLastDeleteTime variable in the
+ hostControlEntry associated with the relevant
+ portion of the hostTable. By observing
+ this variable, the management station may detect
+ the circumstances where a previous association
+ between a value of hostCreationOrder
+ and a hostEntry may no longer hold."
+ ::= { hostEntry 2 }
+
+hostIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected host statistics of which
+ this entry is a part. The set of hosts
+ identified by a particular value of this
+ index is associated with the hostControlEntry
+ as identified by the same value of hostControlIndex."
+ ::= { hostEntry 3 }
+
+hostInPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted to this
+ address since it was added to the hostTable."
+ ::= { hostEntry 4 }
+
+hostOutPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets, including bad packets, transmitted
+ by this address since it was added to the hostTable."
+ ::= { hostEntry 5 }
+
+hostInOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted to this address since
+ it was added to the hostTable (excluding framing
+ bits but including FCS octets), except for those
+ octets in bad packets."
+ ::= { hostEntry 6 }
+
+hostOutOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted by this address since
+ it was added to the hostTable (excluding framing
+ bits but including FCS octets), including those
+ octets in bad packets."
+ ::= { hostEntry 7 }
+
+hostOutErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted by this address
+ since this host was added to the hostTable."
+ ::= { hostEntry 8 }
+
+hostOutBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to the broadcast address
+ since this host was added to the hostTable."
+ ::= { hostEntry 9 }
+
+hostOutMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to a multicast address
+ since this host was added to the hostTable.
+ Note that this number does not include packets
+ directed to the broadcast address."
+ ::= { hostEntry 10 }
+
+-- host Time Table
+
+hostTimeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostTimeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of time-ordered host table entries."
+ ::= { hosts 3 }
+
+hostTimeEntry OBJECT-TYPE
+ SYNTAX HostTimeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for a particular host that has
+ been discovered on an interface of this device. This
+ collection includes the relative ordering of the creation
+ time of this object. For example, an instance of the
+ hostTimeOutBroadcastPkts object might be named
+ hostTimeOutBroadcastPkts.1.687"
+ INDEX { hostTimeIndex, hostTimeCreationOrder }
+ ::= { hostTimeTable 1 }
+
+HostTimeEntry ::= SEQUENCE {
+ hostTimeAddress OCTET STRING,
+ hostTimeCreationOrder Integer32,
+ hostTimeIndex Integer32,
+ hostTimeInPkts Counter32,
+ hostTimeOutPkts Counter32,
+ hostTimeInOctets Counter32,
+ hostTimeOutOctets Counter32,
+ hostTimeOutErrors Counter32,
+ hostTimeOutBroadcastPkts Counter32,
+ hostTimeOutMulticastPkts Counter32
+}
+
+hostTimeAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical address of this host."
+ ::= { hostTimeEntry 1 }
+
+hostTimeCreationOrder OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in
+ the hostTime table among those entries associated
+ with the same hostControlEntry. This index shall
+ be between 1 and N, where N is the value of
+ the associated hostControlTableSize. The ordering
+ of the indexes is based on the order of each entry's
+ insertion into the table, in which entries added earlier
+ have a lower index value than entries added later.
+ Thus the management station has the ability to
+ learn of new entries added to this table without
+ downloading the entire table.
+
+ It is important to note that the index for a
+ particular entry may change as an (earlier) entry
+ is deleted from the table. Because this order may
+ change, management stations should make use of the
+ hostControlLastDeleteTime variable in the
+ hostControlEntry associated with the relevant
+ portion of the hostTimeTable. By observing
+ this variable, the management station may detect
+ the circumstances where a download of the table
+ may have missed entries, and where a previous
+ association between a value of hostTimeCreationOrder
+ and a hostTimeEntry may no longer hold."
+ ::= { hostTimeEntry 2 }
+
+hostTimeIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected host statistics of which
+ this entry is a part. The set of hosts
+ identified by a particular value of this
+ index is associated with the hostControlEntry
+ as identified by the same value of hostControlIndex."
+ ::= { hostTimeEntry 3 }
+
+hostTimeInPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted to this
+ address since it was added to the hostTimeTable."
+ ::= { hostTimeEntry 4 }
+
+hostTimeOutPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets, including bad packets, transmitted
+ by this address since it was added to the hostTimeTable."
+ ::= { hostTimeEntry 5 }
+
+hostTimeInOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted to this address since
+ it was added to the hostTimeTable (excluding framing
+ bits but including FCS octets), except for those
+ octets in bad packets."
+ ::= { hostTimeEntry 6 }
+
+hostTimeOutOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted by this address since
+ it was added to the hostTimeTable (excluding framing
+ bits but including FCS octets), including those
+ octets in bad packets."
+ ::= { hostTimeEntry 7 }
+
+hostTimeOutErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted by this address
+ since this host was added to the hostTimeTable."
+ ::= { hostTimeEntry 8 }
+
+hostTimeOutBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to the broadcast address
+ since this host was added to the hostTimeTable."
+ ::= { hostTimeEntry 9 }
+
+hostTimeOutMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to a multicast address
+ since this host was added to the hostTimeTable.
+ Note that this number does not include packets directed
+ to the broadcast address."
+ ::= { hostTimeEntry 10 }
+
+-- The Host Top "N" Group
+
+-- Implementation of the Host Top N group is optional. The Host Top N
+-- group requires the implementation of the host group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Host Top N group is used to prepare reports that describe
+-- the hosts that top a list ordered by one of their statistics.
+-- The available statistics are samples of one of their
+-- base statistics, over an interval specified by the management
+-- station. Thus, these statistics are rate based. The management
+-- station also selects how many such hosts are reported.
+
+-- The hostTopNControlTable is used to initiate the generation of
+-- such a report. The management station may select the parameters
+-- of such a report, such as which interface, which statistic,
+-- how many hosts, and the start and stop times of the sampling.
+-- When the report is prepared, entries are created in the
+-- hostTopNTable associated with the relevant hostTopNControlEntry.
+-- These entries are static for each report after it has been
+-- prepared.
+
+hostTopNControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of top N host control entries."
+ ::= { hostTopN 1 }
+
+hostTopNControlEntry OBJECT-TYPE
+ SYNTAX HostTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that control the creation of a report
+ of the top N hosts according to several metrics. For
+ example, an instance of the hostTopNDuration object might
+ be named hostTopNDuration.3"
+ INDEX { hostTopNControlIndex }
+ ::= { hostTopNControlTable 1 }
+
+HostTopNControlEntry ::= SEQUENCE {
+ hostTopNControlIndex Integer32,
+ hostTopNHostIndex Integer32,
+ hostTopNRateBase INTEGER,
+ hostTopNTimeRemaining Integer32,
+ hostTopNDuration Integer32,
+ hostTopNRequestedSize Integer32,
+ hostTopNGrantedSize Integer32,
+ hostTopNStartTime TimeTicks,
+ hostTopNOwner OwnerString,
+ hostTopNStatus EntryStatus
+}
+
+hostTopNControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the hostTopNControl table. Each such
+ entry defines one top N report prepared for
+ one interface."
+ ::= { hostTopNControlEntry 1 }
+
+hostTopNHostIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The host table for which a top N report will be prepared
+ on behalf of this entry. The host table identified by a
+ particular value of this index is associated with the same
+ host table as identified by the same value of
+ hostIndex.
+
+ This object may not be modified if the associated
+ hostTopNStatus object is equal to valid(1)."
+ ::= { hostTopNControlEntry 2 }
+
+hostTopNRateBase OBJECT-TYPE
+ SYNTAX INTEGER {
+ hostTopNInPkts(1),
+ hostTopNOutPkts(2),
+ hostTopNInOctets(3),
+ hostTopNOutOctets(4),
+ hostTopNOutErrors(5),
+ hostTopNOutBroadcastPkts(6),
+ hostTopNOutMulticastPkts(7)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The variable for each host that the hostTopNRate
+ variable is based upon.
+
+ This object may not be modified if the associated
+ hostTopNStatus object is equal to valid(1)."
+ ::= { hostTopNControlEntry 3 }
+
+hostTopNTimeRemaining OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds left in the report currently being
+ collected. When this object is modified by the management
+ station, a new collection is started, possibly aborting
+ a currently running report. The new value is used
+ as the requested duration of this report, which is
+ loaded into the associated hostTopNDuration object.
+
+ When this object is set to a non-zero value, any
+ associated hostTopNEntries shall be made
+ inaccessible by the monitor. While the value of this
+ object is non-zero, it decrements by one per second until
+ it reaches zero. During this time, all associated
+ hostTopNEntries shall remain inaccessible. At the time
+ that this object decrements to zero, the report is made
+ accessible in the hostTopNTable. Thus, the hostTopN
+ table needs to be created only at the end of the collection
+ interval."
+ DEFVAL { 0 }
+ ::= { hostTopNControlEntry 4 }
+
+hostTopNDuration OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that this report has collected
+ during the last sampling interval, or if this
+ report is currently being collected, the number
+ of seconds that this report is being collected
+ during this sampling interval.
+
+ When the associated hostTopNTimeRemaining object is set,
+ this object shall be set by the probe to the same value
+ and shall not be modified until the next time
+ the hostTopNTimeRemaining is set.
+
+ This value shall be zero if no reports have been
+ requested for this hostTopNControlEntry."
+ DEFVAL { 0 }
+ ::= { hostTopNControlEntry 5 }
+
+hostTopNRequestedSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of hosts requested for the top N
+ table.
+
+ When this object is created or modified, the probe
+ should set hostTopNGrantedSize as closely to this
+ object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 10 }
+ ::= { hostTopNControlEntry 6 }
+
+hostTopNGrantedSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of hosts in the top N table.
+
+ When the associated hostTopNRequestedSize object is
+ created or modified, the probe should set this
+ object as closely to the requested value as is possible
+ for the particular implementation and available
+ resources. The probe must not lower this value except
+ as a result of a set to the associated
+ hostTopNRequestedSize object.
+
+ Hosts with the highest value of hostTopNRate shall be
+ placed in this table in decreasing order of this rate
+ until there is no more room or until there are no more
+ hosts."
+ ::= { hostTopNControlEntry 7 }
+
+hostTopNStartTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this top N report was
+ last started. In other words, this is the time that
+ the associated hostTopNTimeRemaining object was
+ modified to start the requested report."
+ ::= { hostTopNControlEntry 8 }
+
+hostTopNOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { hostTopNControlEntry 9 }
+
+hostTopNStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this hostTopNControl entry.
+
+ If this object is not equal to valid(1), all associated
+ hostTopNEntries shall be deleted by the agent."
+ ::= { hostTopNControlEntry 10 }
+
+hostTopNTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of top N host entries."
+ ::= { hostTopN 2 }
+
+hostTopNEntry OBJECT-TYPE
+ SYNTAX HostTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of statistics for a host that is part of a top N
+ report. For example, an instance of the hostTopNRate
+ object might be named hostTopNRate.3.10"
+ INDEX { hostTopNReport, hostTopNIndex }
+ ::= { hostTopNTable 1 }
+
+HostTopNEntry ::= SEQUENCE {
+ hostTopNReport Integer32,
+ hostTopNIndex Integer32,
+ hostTopNAddress OCTET STRING,
+ hostTopNRate Integer32
+}
+
+hostTopNReport OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object identifies the top N report of which
+ this entry is a part. The set of hosts
+ identified by a particular value of this
+ object is part of the same report as identified
+ by the same value of the hostTopNControlIndex object."
+ ::= { hostTopNEntry 1 }
+
+hostTopNIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in
+ the hostTopN table among those in the same report.
+ This index is between 1 and N, where N is the
+ number of entries in this table. Increasing values
+ of hostTopNIndex shall be assigned to entries with
+ decreasing values of hostTopNRate until index N
+ is assigned to the entry with the lowest value of
+ hostTopNRate or there are no more hostTopNEntries."
+ ::= { hostTopNEntry 2 }
+
+hostTopNAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical address of this host."
+ ::= { hostTopNEntry 3 }
+
+hostTopNRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of change in the selected variable
+ during this sampling interval. The selected
+ variable is this host's instance of the object
+ selected by hostTopNRateBase."
+ ::= { hostTopNEntry 4 }
+
+-- The Matrix Group
+
+-- Implementation of the Matrix group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Matrix group consists of the matrixControlTable, matrixSDTable
+-- and the matrixDSTable. These tables store statistics for a
+-- particular conversation between two addresses. As the device
+-- detects a new conversation, including those to a non-unicast
+-- address, it creates a new entry in both of the matrix tables.
+-- It must only create new entries based on information
+-- received in good packets. If the monitoring device finds
+-- itself short of resources, it may delete entries as needed.
+-- It is suggested that the device delete the least recently used
+-- entries first.
+
+matrixControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information entries for the
+ traffic matrix on each interface."
+ ::= { matrix 1 }
+
+matrixControlEntry OBJECT-TYPE
+ SYNTAX MatrixControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a traffic matrix on a particular
+ interface. For example, an instance of the
+ matrixControlLastDeleteTime object might be named
+ matrixControlLastDeleteTime.1"
+ INDEX { matrixControlIndex }
+ ::= { matrixControlTable 1 }
+
+MatrixControlEntry ::= SEQUENCE {
+ matrixControlIndex Integer32,
+ matrixControlDataSource OBJECT IDENTIFIER,
+ matrixControlTableSize Integer32,
+ matrixControlLastDeleteTime TimeTicks,
+ matrixControlOwner OwnerString,
+ matrixControlStatus EntryStatus
+}
+
+matrixControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ matrixControl table. Each such entry defines
+ a function that discovers conversations on a particular
+ interface and places statistics about them in the
+ matrixSDTable and the matrixDSTable on behalf of this
+ matrixControlEntry."
+ ::= { matrixControlEntry 1 }
+
+matrixControlDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the source of
+ the data from which this entry creates a traffic matrix.
+ This source can be any interface on this device. In
+ order to identify a particular interface, this object
+ shall identify the instance of the ifIndex object,
+ defined in RFC 2233 [17], for the desired
+ interface. For example, if an entry were to receive data
+ from interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ matrixControlStatus object is equal to valid(1)."
+ ::= { matrixControlEntry 2 }
+
+matrixControlTableSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of matrixSDEntries in the matrixSDTable
+ for this interface. This must also be the value of
+ the number of entries in the matrixDSTable for this
+ interface."
+ ::= { matrixControlEntry 3 }
+
+matrixControlLastDeleteTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the last entry
+ was deleted from the portion of the matrixSDTable
+ or matrixDSTable associated with this matrixControlEntry.
+ If no deletions have occurred, this value shall be
+ zero."
+ ::= { matrixControlEntry 4 }
+
+matrixControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { matrixControlEntry 5 }
+
+matrixControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this matrixControl entry.
+ If this object is not equal to valid(1), all associated
+ entries in the matrixSDTable and the matrixDSTable
+ shall be deleted by the agent."
+ ::= { matrixControlEntry 6 }
+
+matrixSDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of traffic matrix entries indexed by
+ source and destination MAC address."
+ ::= { matrix 2 }
+
+matrixSDEntry OBJECT-TYPE
+ SYNTAX MatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for communications between
+ two addresses on a particular interface. For example,
+ an instance of the matrixSDPkts object might be named
+ matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113"
+ INDEX { matrixSDIndex,
+ matrixSDSourceAddress, matrixSDDestAddress }
+ ::= { matrixSDTable 1 }
+
+MatrixSDEntry ::= SEQUENCE {
+ matrixSDSourceAddress OCTET STRING,
+ matrixSDDestAddress OCTET STRING,
+ matrixSDIndex Integer32,
+ matrixSDPkts Counter32,
+ matrixSDOctets Counter32,
+ matrixSDErrors Counter32
+}
+
+matrixSDSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The source physical address."
+ ::= { matrixSDEntry 1 }
+
+matrixSDDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination physical address."
+ ::= { matrixSDEntry 2 }
+
+matrixSDIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected matrix statistics of which
+ this entry is a part. The set of matrix statistics
+ identified by a particular value of this index
+ is associated with the same matrixControlEntry
+ as identified by the same value of matrixControlIndex."
+ ::= { matrixSDEntry 3 }
+
+matrixSDPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets transmitted from the source
+ address to the destination address (this number includes
+ bad packets)."
+ ::= { matrixSDEntry 4 }
+
+matrixSDOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets (excluding framing bits but
+ including FCS octets) contained in all packets
+ transmitted from the source address to the
+ destination address."
+ ::= { matrixSDEntry 5 }
+
+matrixSDErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted from
+ the source address to the destination address."
+ ::= { matrixSDEntry 6 }
+
+-- Traffic matrix tables from destination to source
+
+matrixDSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of traffic matrix entries indexed by
+ destination and source MAC address."
+ ::= { matrix 3 }
+
+matrixDSEntry OBJECT-TYPE
+ SYNTAX MatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for communications between
+ two addresses on a particular interface. For example,
+ an instance of the matrixSDPkts object might be named
+ matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176"
+ INDEX { matrixDSIndex,
+ matrixDSDestAddress, matrixDSSourceAddress }
+ ::= { matrixDSTable 1 }
+
+MatrixDSEntry ::= SEQUENCE {
+ matrixDSSourceAddress OCTET STRING,
+ matrixDSDestAddress OCTET STRING,
+ matrixDSIndex Integer32,
+ matrixDSPkts Counter32,
+ matrixDSOctets Counter32,
+ matrixDSErrors Counter32
+}
+
+matrixDSSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The source physical address."
+ ::= { matrixDSEntry 1 }
+
+matrixDSDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination physical address."
+ ::= { matrixDSEntry 2 }
+
+matrixDSIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected matrix statistics of which
+ this entry is a part. The set of matrix statistics
+ identified by a particular value of this index
+ is associated with the same matrixControlEntry
+ as identified by the same value of matrixControlIndex."
+ ::= { matrixDSEntry 3 }
+
+matrixDSPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets transmitted from the source
+ address to the destination address (this number includes
+ bad packets)."
+ ::= { matrixDSEntry 4 }
+
+matrixDSOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets (excluding framing bits
+ but including FCS octets) contained in all packets
+ transmitted from the source address to the
+ destination address."
+ ::= { matrixDSEntry 5 }
+
+matrixDSErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted from
+ the source address to the destination address."
+ ::= { matrixDSEntry 6 }
+
+-- The Filter Group
+
+-- Implementation of the Filter group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Filter group allows packets to be captured with an
+-- arbitrary filter expression. A logical data and
+-- event stream or "channel" is formed by the packets
+-- that match the filter expression.
+--
+-- This filter mechanism allows the creation of an arbitrary
+-- logical expression with which to filter packets. Each
+-- filter associated with a channel is OR'ed with the others.
+-- Within a filter, any bits checked in the data and status are
+-- AND'ed with respect to other bits in the same filter. The
+-- NotMask also allows for checking for inequality. Finally,
+-- the channelAcceptType object allows for inversion of the
+-- whole equation.
+--
+-- If a management station wishes to receive a trap to alert it
+-- that new packets have been captured and are available for
+-- download, it is recommended that it set up an alarm entry that
+-- monitors the value of the relevant channelMatches instance.
+--
+-- The channel can be turned on or off, and can also
+-- generate events when packets pass through it.
+
+filterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of packet filter entries."
+ ::= { filter 1 }
+
+filterEntry OBJECT-TYPE
+ SYNTAX FilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters for a packet filter applied on a
+ particular interface. As an example, an instance of the
+ filterPktData object might be named filterPktData.12"
+ INDEX { filterIndex }
+ ::= { filterTable 1 }
+
+FilterEntry ::= SEQUENCE {
+ filterIndex Integer32,
+ filterChannelIndex Integer32,
+ filterPktDataOffset Integer32,
+ filterPktData OCTET STRING,
+ filterPktDataMask OCTET STRING,
+ filterPktDataNotMask OCTET STRING,
+ filterPktStatus Integer32,
+ filterPktStatusMask Integer32,
+ filterPktStatusNotMask Integer32,
+ filterOwner OwnerString,
+ filterStatus EntryStatus
+}
+
+filterIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the filter table. Each such entry defines
+ one filter that is to be applied to every packet
+ received on an interface."
+ ::= { filterEntry 1 }
+
+filterChannelIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the channel of which this filter
+ is a part. The filters identified by a particular value
+ of this object are associated with the same channel as
+ identified by the same value of the channelIndex object."
+ ::= { filterEntry 2 }
+
+filterPktDataOffset OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The offset from the beginning of each packet where
+ a match of packet data will be attempted. This offset
+ is measured from the point in the physical layer
+ packet after the framing bits, if any. For example,
+ in an Ethernet frame, this point is at the beginning of
+ the destination MAC address.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ DEFVAL { 0 }
+
+ ::= { filterEntry 3 }
+
+filterPktData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The data that is to be matched with the input packet.
+ For each packet received, this filter and the accompanying
+ filterPktDataMask and filterPktDataNotMask will be
+ adjusted for the offset. The only bits relevant to this
+ match algorithm are those that have the corresponding
+ filterPktDataMask bit equal to one. The following three
+ rules are then applied to every packet:
+
+ (1) If the packet is too short and does not have data
+ corresponding to part of the filterPktData, the packet
+ will fail this data match.
+
+ (2) For each relevant bit from the packet with the
+ corresponding filterPktDataNotMask bit set to zero, if
+ the bit from the packet is not equal to the corresponding
+ bit from the filterPktData, then the packet will fail
+ this data match.
+
+ (3) If for every relevant bit from the packet with the
+ corresponding filterPktDataNotMask bit set to one, the
+ bit from the packet is equal to the corresponding bit
+ from the filterPktData, then the packet will fail this
+ data match.
+
+ Any packets that have not failed any of the three matches
+ above have passed this data match. In particular, a zero
+ length filter will match any packet.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 4 }
+
+filterPktDataMask OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The mask that is applied to the match process.
+ After adjusting this mask for the offset, only those
+ bits in the received packet that correspond to bits set
+ in this mask are relevant for further processing by the
+ match algorithm. The offset is applied to filterPktDataMask
+ in the same way it is applied to the filter. For the
+ purposes of the matching algorithm, if the associated
+ filterPktData object is longer than this mask, this mask is
+ conceptually extended with '1' bits until it reaches the
+ length of the filterPktData object.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 5 }
+
+filterPktDataNotMask OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The inversion mask that is applied to the match
+ process. After adjusting this mask for the offset,
+ those relevant bits in the received packet that correspond
+ to bits cleared in this mask must all be equal to their
+ corresponding bits in the filterPktData object for the packet
+ to be accepted. In addition, at least one of those relevant
+ bits in the received packet that correspond to bits set in
+ this mask must be different to its corresponding bit in the
+ filterPktData object.
+
+ For the purposes of the matching algorithm, if the associated
+ filterPktData object is longer than this mask, this mask is
+ conceptually extended with '0' bits until it reaches the
+ length of the filterPktData object.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 6 }
+
+filterPktStatus OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status that is to be matched with the input packet.
+ The only bits relevant to this match algorithm are those that
+ have the corresponding filterPktStatusMask bit equal to one.
+ The following two rules are then applied to every packet:
+
+ (1) For each relevant bit from the packet status with the
+ corresponding filterPktStatusNotMask bit set to zero, if
+ the bit from the packet status is not equal to the
+ corresponding bit from the filterPktStatus, then the
+ packet will fail this status match.
+
+ (2) If for every relevant bit from the packet status with the
+ corresponding filterPktStatusNotMask bit set to one, the
+ bit from the packet status is equal to the corresponding
+ bit from the filterPktStatus, then the packet will fail
+ this status match.
+
+ Any packets that have not failed either of the two matches
+ above have passed this status match. In particular, a zero
+ length status filter will match any packet's status.
+
+ The value of the packet status is a sum. This sum
+ initially takes the value zero. Then, for each
+ error, E, that has been discovered in this packet,
+ 2 raised to a value representing E is added to the sum.
+ The errors and the bits that represent them are dependent
+ on the media type of the interface that this channel
+ is receiving packets from.
+
+ The errors defined for a packet captured off of an
+ Ethernet interface are as follows:
+
+ bit # Error
+ 0 Packet is longer than 1518 octets
+ 1 Packet is shorter than 64 octets
+ 2 Packet experienced a CRC or Alignment error
+
+ For example, an Ethernet fragment would have a
+ value of 6 (2^1 + 2^2).
+
+ As this MIB is expanded to new media types, this object
+ will have other media-specific errors defined.
+
+ For the purposes of this status matching algorithm, if the
+ packet status is longer than this filterPktStatus object,
+ this object is conceptually extended with '0' bits until it
+ reaches the size of the packet status.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 7 }
+
+filterPktStatusMask OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The mask that is applied to the status match process.
+ Only those bits in the received packet that correspond to
+ bits set in this mask are relevant for further processing
+ by the status match algorithm. For the purposes
+ of the matching algorithm, if the associated filterPktStatus
+ object is longer than this mask, this mask is conceptually
+ extended with '1' bits until it reaches the size of the
+ filterPktStatus. In addition, if a packet status is longer
+ than this mask, this mask is conceptually extended with '0'
+ bits until it reaches the size of the packet status.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 8 }
+
+filterPktStatusNotMask OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The inversion mask that is applied to the status match
+ process. Those relevant bits in the received packet status
+ that correspond to bits cleared in this mask must all be
+ equal to their corresponding bits in the filterPktStatus
+ object for the packet to be accepted. In addition, at least
+ one of those relevant bits in the received packet status
+ that correspond to bits set in this mask must be different
+ to its corresponding bit in the filterPktStatus object for
+ the packet to be accepted.
+
+ For the purposes of the matching algorithm, if the associated
+ filterPktStatus object or a packet status is longer than this
+ mask, this mask is conceptually extended with '0' bits until
+ it reaches the longer of the lengths of the filterPktStatus
+ object and the packet status.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 9 }
+
+filterOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { filterEntry 10 }
+
+filterStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this filter entry."
+ ::= { filterEntry 11 }
+
+channelTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of packet channel entries."
+ ::= { filter 2 }
+
+channelEntry OBJECT-TYPE
+ SYNTAX ChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters for a packet channel applied on a
+ particular interface. As an example, an instance of the
+ channelMatches object might be named channelMatches.3"
+ INDEX { channelIndex }
+ ::= { channelTable 1 }
+
+ChannelEntry ::= SEQUENCE {
+ channelIndex Integer32,
+ channelIfIndex Integer32,
+ channelAcceptType INTEGER,
+ channelDataControl INTEGER,
+ channelTurnOnEventIndex Integer32,
+ channelTurnOffEventIndex Integer32,
+ channelEventIndex Integer32,
+ channelEventStatus INTEGER,
+ channelMatches Counter32,
+ channelDescription DisplayString,
+ channelOwner OwnerString,
+ channelStatus EntryStatus
+}
+
+channelIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the channel
+ table. Each such entry defines one channel, a logical
+ data and event stream.
+
+ It is suggested that before creating a channel, an
+ application should scan all instances of the
+ filterChannelIndex object to make sure that there are no
+ pre-existing filters that would be inadvertently be linked
+ to the channel."
+ ::= { channelEntry 1 }
+
+channelIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object uniquely identifies the
+ interface on this remote network monitoring device to which
+ the associated filters are applied to allow data into this
+ channel. The interface identified by a particular value
+ of this object is the same interface as identified by the
+ same value of the ifIndex object, defined in RFC 2233 [17].
+
+ The filters in this group are applied to all packets on
+ the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 2 }
+
+channelAcceptType OBJECT-TYPE
+ SYNTAX INTEGER {
+ acceptMatched(1),
+ acceptFailed(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object controls the action of the filters
+ associated with this channel. If this object is equal
+ to acceptMatched(1), packets will be accepted to this
+ channel if they are accepted by both the packet data and
+ packet status matches of an associated filter. If
+ this object is equal to acceptFailed(2), packets will
+ be accepted to this channel only if they fail either
+ the packet data match or the packet status match of
+ each of the associated filters.
+
+ In particular, a channel with no associated filters will
+ match no packets if set to acceptMatched(1) case and will
+ match all packets in the acceptFailed(2) case.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 3 }
+
+channelDataControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object controls the flow of data through this channel.
+ If this object is on(1), data, status and events flow
+ through this channel. If this object is off(2), data,
+ status and events will not flow through this channel."
+ DEFVAL { off }
+ ::= { channelEntry 4 }
+
+channelTurnOnEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the event
+ that is configured to turn the associated
+ channelDataControl from off to on when the event is
+ generated. The event identified by a particular value
+ of this object is the same event as identified by the
+ same value of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then no
+ association exists. In fact, if no event is intended
+ for this channel, channelTurnOnEventIndex must be
+ set to zero, a non-existent event index.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 5 }
+
+channelTurnOffEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the event
+ that is configured to turn the associated
+ channelDataControl from on to off when the event is
+ generated. The event identified by a particular value
+ of this object is the same event as identified by the
+ same value of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then no
+ association exists. In fact, if no event is intended
+ for this channel, channelTurnOffEventIndex must be
+ set to zero, a non-existent event index.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 6 }
+
+channelEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the event
+ that is configured to be generated when the
+ associated channelDataControl is on and a packet
+ is matched. The event identified by a particular value
+ of this object is the same event as identified by the
+ same value of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then no
+ association exists. In fact, if no event is intended
+ for this channel, channelEventIndex must be
+ set to zero, a non-existent event index.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 7 }
+
+channelEventStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ eventReady(1),
+ eventFired(2),
+ eventAlwaysReady(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The event status of this channel.
+
+ If this channel is configured to generate events
+ when packets are matched, a means of controlling
+ the flow of those events is often needed. When
+ this object is equal to eventReady(1), a single
+ event may be generated, after which this object
+ will be set by the probe to eventFired(2). While
+ in the eventFired(2) state, no events will be
+ generated until the object is modified to
+ eventReady(1) (or eventAlwaysReady(3)). The
+ management station can thus easily respond to a
+ notification of an event by re-enabling this object.
+
+ If the management station wishes to disable this
+ flow control and allow events to be generated
+ at will, this object may be set to
+ eventAlwaysReady(3). Disabling the flow control
+ is discouraged as it can result in high network
+ traffic or other performance problems."
+ DEFVAL { eventReady }
+ ::= { channelEntry 8 }
+
+channelMatches OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this channel has matched a packet.
+ Note that this object is updated even when
+ channelDataControl is set to off."
+ ::= { channelEntry 9 }
+
+channelDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A comment describing this channel."
+ ::= { channelEntry 10 }
+
+channelOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { channelEntry 11 }
+
+channelStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this channel entry."
+ ::= { channelEntry 12 }
+
+-- The Packet Capture Group
+
+-- Implementation of the Packet Capture group is optional. The Packet
+-- Capture Group requires implementation of the Filter Group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Packet Capture group allows packets to be captured
+-- upon a filter match. The bufferControlTable controls
+-- the captured packets output from a channel that is
+-- associated with it. The captured packets are placed
+-- in entries in the captureBufferTable. These entries are
+-- associated with the bufferControlEntry on whose behalf they
+-- were stored.
+
+bufferControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BufferControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of buffers control entries."
+ ::= { capture 1 }
+
+bufferControlEntry OBJECT-TYPE
+ SYNTAX BufferControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that control the collection of a stream
+ of packets that have matched filters. As an example, an
+ instance of the bufferControlCaptureSliceSize object might
+ be named bufferControlCaptureSliceSize.3"
+
+ INDEX { bufferControlIndex }
+ ::= { bufferControlTable 1 }
+
+BufferControlEntry ::= SEQUENCE {
+ bufferControlIndex Integer32,
+ bufferControlChannelIndex Integer32,
+ bufferControlFullStatus INTEGER,
+ bufferControlFullAction INTEGER,
+ bufferControlCaptureSliceSize Integer32,
+ bufferControlDownloadSliceSize Integer32,
+ bufferControlDownloadOffset Integer32,
+ bufferControlMaxOctetsRequested Integer32,
+ bufferControlMaxOctetsGranted Integer32,
+ bufferControlCapturedPackets Integer32,
+ bufferControlTurnOnTime TimeTicks,
+ bufferControlOwner OwnerString,
+ bufferControlStatus EntryStatus
+}
+
+bufferControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the bufferControl table. The value of this
+ index shall never be zero. Each such
+ entry defines one set of packets that is
+ captured and controlled by one or more filters."
+ ::= { bufferControlEntry 1 }
+
+bufferControlChannelIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An index that identifies the channel that is the
+ source of packets for this bufferControl table.
+ The channel identified by a particular value of this
+ index is the same as identified by the same value of
+ the channelIndex object.
+
+ This object may not be modified if the associated
+ bufferControlStatus object is equal to valid(1)."
+ ::= { bufferControlEntry 2 }
+
+bufferControlFullStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ spaceAvailable(1),
+ full(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object shows whether the buffer has room to
+ accept new packets or if it is full.
+
+ If the status is spaceAvailable(1), the buffer is
+ accepting new packets normally. If the status is
+ full(2) and the associated bufferControlFullAction
+ object is wrapWhenFull, the buffer is accepting new
+ packets by deleting enough of the oldest packets
+ to make room for new ones as they arrive. Otherwise,
+ if the status is full(2) and the
+ bufferControlFullAction object is lockWhenFull,
+ then the buffer has stopped collecting packets.
+
+ When this object is set to full(2) the probe must
+ not later set it to spaceAvailable(1) except in the
+ case of a significant gain in resources such as
+ an increase of bufferControlOctetsGranted. In
+ particular, the wrap-mode action of deleting old
+ packets to make room for newly arrived packets
+ must not affect the value of this object."
+ ::= { bufferControlEntry 3 }
+
+bufferControlFullAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ lockWhenFull(1),
+ wrapWhenFull(2) -- FIFO
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Controls the action of the buffer when it
+ reaches the full status. When in the lockWhenFull(1)
+ state and a packet is added to the buffer that
+ fills the buffer, the bufferControlFullStatus will
+ be set to full(2) and this buffer will stop capturing
+ packets."
+ ::= { bufferControlEntry 4 }
+
+bufferControlCaptureSliceSize OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of octets of each packet
+ that will be saved in this capture buffer.
+ For example, if a 1500 octet packet is received by
+ the probe and this object is set to 500, then only
+ 500 octets of the packet will be stored in the
+ associated capture buffer. If this variable is set
+ to 0, the capture buffer will save as many octets
+ as is possible.
+
+ This object may not be modified if the associated
+ bufferControlStatus object is equal to valid(1)."
+ DEFVAL { 100 }
+ ::= { bufferControlEntry 5 }
+
+bufferControlDownloadSliceSize OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of octets of each packet
+ in this capture buffer that will be returned in
+ an SNMP retrieval of that packet. For example,
+ if 500 octets of a packet have been stored in the
+ associated capture buffer, the associated
+ bufferControlDownloadOffset is 0, and this
+ object is set to 100, then the captureBufferPacket
+ object that contains the packet will contain only
+ the first 100 octets of the packet.
+
+ A prudent manager will take into account possible
+ interoperability or fragmentation problems that may
+ occur if the download slice size is set too large.
+ In particular, conformant SNMP implementations are not
+ required to accept messages whose length exceeds 484
+ octets, although they are encouraged to support larger
+ datagrams whenever feasible."
+ DEFVAL { 100 }
+ ::= { bufferControlEntry 6 }
+
+bufferControlDownloadOffset OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The offset of the first octet of each packet
+ in this capture buffer that will be returned in
+ an SNMP retrieval of that packet. For example,
+ if 500 octets of a packet have been stored in the
+ associated capture buffer and this object is set to
+ 100, then the captureBufferPacket object that
+ contains the packet will contain bytes starting
+ 100 octets into the packet."
+ DEFVAL { 0 }
+ ::= { bufferControlEntry 7 }
+
+bufferControlMaxOctetsRequested OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The requested maximum number of octets to be
+ saved in this captureBuffer, including any
+ implementation-specific overhead. If this variable
+ is set to -1, the capture buffer will save as many
+ octets as is possible.
+
+ When this object is created or modified, the probe
+ should set bufferControlMaxOctetsGranted as closely
+ to this object as is possible for the particular probe
+ implementation and available resources. However, if
+ the object has the special value of -1, the probe
+ must set bufferControlMaxOctetsGranted to -1."
+ DEFVAL { -1 }
+ ::= { bufferControlEntry 8 }
+
+bufferControlMaxOctetsGranted OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of octets that can be
+ saved in this captureBuffer, including overhead.
+ If this variable is -1, the capture buffer will save
+ as many octets as possible.
+
+ When the bufferControlMaxOctetsRequested object is
+ created or modified, the probe should set this object
+ as closely to the requested value as is possible for the
+ particular probe implementation and available resources.
+ However, if the request object has the special value
+ of -1, the probe must set this object to -1.
+
+ The probe must not lower this value except as a result of
+ a modification to the associated
+ bufferControlMaxOctetsRequested object.
+
+ When this maximum number of octets is reached
+ and a new packet is to be added to this
+ capture buffer and the corresponding
+ bufferControlFullAction is set to wrapWhenFull(2),
+ enough of the oldest packets associated with this
+ capture buffer shall be deleted by the agent so
+ that the new packet can be added. If the corresponding
+ bufferControlFullAction is set to lockWhenFull(1),
+ the new packet shall be discarded. In either case,
+ the probe must set bufferControlFullStatus to
+ full(2).
+
+ When the value of this object changes to a value less
+ than the current value, entries are deleted from
+ the captureBufferTable associated with this
+ bufferControlEntry. Enough of the
+ oldest of these captureBufferEntries shall be
+ deleted by the agent so that the number of octets
+ used remains less than or equal to the new value of
+ this object.
+
+ When the value of this object changes to a value greater
+ than the current value, the number of associated
+ captureBufferEntries may be allowed to grow."
+ ::= { bufferControlEntry 9 }
+
+bufferControlCapturedPackets OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets currently in this captureBuffer."
+ ::= { bufferControlEntry 10 }
+
+bufferControlTurnOnTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this capture buffer was
+ first turned on."
+ ::= { bufferControlEntry 11 }
+
+bufferControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { bufferControlEntry 12 }
+
+bufferControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this buffer Control Entry."
+ ::= { bufferControlEntry 13 }
+
+captureBufferTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CaptureBufferEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of packets captured off of a channel."
+ ::= { capture 2 }
+
+captureBufferEntry OBJECT-TYPE
+ SYNTAX CaptureBufferEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A packet captured off of an attached network. As an
+ example, an instance of the captureBufferPacketData
+ object might be named captureBufferPacketData.3.1783"
+ INDEX { captureBufferControlIndex, captureBufferIndex }
+ ::= { captureBufferTable 1 }
+
+CaptureBufferEntry ::= SEQUENCE {
+ captureBufferControlIndex Integer32,
+ captureBufferIndex Integer32,
+ captureBufferPacketID Integer32,
+ captureBufferPacketData OCTET STRING,
+ captureBufferPacketLength Integer32,
+ captureBufferPacketTime Integer32,
+ captureBufferPacketStatus Integer32
+}
+
+captureBufferControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the bufferControlEntry with which
+ this packet is associated."
+ ::= { captureBufferEntry 1 }
+
+captureBufferIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the captureBuffer table associated with a
+ particular bufferControlEntry. This index will
+ start at 1 and increase by one for each new packet
+ added with the same captureBufferControlIndex.
+
+ Should this value reach 2147483647, the next packet
+ added with the same captureBufferControlIndex shall
+ cause this value to wrap around to 1."
+ ::= { captureBufferEntry 2 }
+
+captureBufferPacketID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that describes the order of packets
+ that are received on a particular interface.
+ The packetID of a packet captured on an
+ interface is defined to be greater than the
+ packetID's of all packets captured previously on
+ the same interface. As the captureBufferPacketID
+ object has a maximum positive value of 2^31 - 1,
+ any captureBufferPacketID object shall have the
+ value of the associated packet's packetID mod 2^31."
+ ::= { captureBufferEntry 3 }
+
+captureBufferPacketData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The data inside the packet, starting at the beginning
+ of the packet plus any offset specified in the
+ associated bufferControlDownloadOffset, including any
+ link level headers. The length of the data in this object
+ is the minimum of the length of the captured packet minus
+ the offset, the length of the associated
+ bufferControlCaptureSliceSize minus the offset, and the
+ associated bufferControlDownloadSliceSize. If this minimum
+ is less than zero, this object shall have a length of zero."
+ ::= { captureBufferEntry 4 }
+
+captureBufferPacketLength OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual length (off the wire) of the packet stored
+ in this entry, including FCS octets."
+ ::= { captureBufferEntry 5 }
+
+captureBufferPacketTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of milliseconds that had passed since
+ this capture buffer was first turned on when this
+ packet was captured."
+ ::= { captureBufferEntry 6 }
+
+captureBufferPacketStatus OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value which indicates the error status of this packet.
+
+ The value of this object is defined in the same way as
+ filterPktStatus. The value is a sum. This sum
+ initially takes the value zero. Then, for each
+ error, E, that has been discovered in this packet,
+ 2 raised to a value representing E is added to the sum.
+
+ The errors defined for a packet captured off of an
+ Ethernet interface are as follows:
+
+ bit # Error
+ 0 Packet is longer than 1518 octets
+ 1 Packet is shorter than 64 octets
+ 2 Packet experienced a CRC or Alignment error
+ 3 First packet in this capture buffer after
+ it was detected that some packets were
+ not processed correctly.
+ 4 Packet's order in buffer is only approximate
+ (May only be set for packets sent from
+ the probe)
+
+ For example, an Ethernet fragment would have a
+ value of 6 (2^1 + 2^2).
+
+ As this MIB is expanded to new media types, this object
+ will have other media-specific errors defined."
+ ::= { captureBufferEntry 7 }
+
+-- The Event Group
+
+-- Implementation of the Event group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Event group controls the generation and notification
+-- of events from this device. Each entry in the eventTable
+-- describes the parameters of the event that can be triggered.
+-- Each event entry is fired by an associated condition located
+-- elsewhere in the MIB. An event entry may also be associated
+-- with a function elsewhere in the MIB that will be executed
+-- when the event is generated. For example, a channel may
+-- be turned on or off by the firing of an event.
+--
+-- Each eventEntry may optionally specify that a log entry
+-- be created on its behalf whenever the event occurs.
+-- Each entry may also specify that notification should
+-- occur by way of SNMP trap messages. In this case, the
+-- community for the trap message is given in the associated
+-- eventCommunity object. The enterprise and specific trap
+-- fields of the trap are determined by the condition that
+-- triggered the event. Two traps are defined: risingAlarm and
+-- fallingAlarm. If the eventTable is triggered by a condition
+-- specified elsewhere, the enterprise and specific trap fields
+-- must be specified for traps generated for that condition.
+
+eventTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of events to be generated."
+ ::= { event 1 }
+
+eventEntry OBJECT-TYPE
+ SYNTAX EventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that describe an event to be generated
+ when certain conditions are met. As an example, an instance
+ of the eventLastTimeSent object might be named
+ eventLastTimeSent.6"
+ INDEX { eventIndex }
+ ::= { eventTable 1 }
+
+EventEntry ::= SEQUENCE {
+ eventIndex Integer32,
+ eventDescription DisplayString,
+ eventType INTEGER,
+ eventCommunity OCTET STRING,
+ eventLastTimeSent TimeTicks,
+ eventOwner OwnerString,
+ eventStatus EntryStatus
+}
+
+eventIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ event table. Each such entry defines one event that
+ is to be generated when the appropriate conditions
+ occur."
+ ::= { eventEntry 1 }
+
+eventDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A comment describing this event entry."
+ ::= { eventEntry 2 }
+
+eventType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ log(2),
+ snmptrap(3), -- send an SNMP trap
+ logandtrap(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of notification that the probe will make
+ about this event. In the case of log, an entry is
+ made in the log table for each event. In the case of
+ snmp-trap, an SNMP trap is sent to one or more
+ management stations."
+ ::= { eventEntry 3 }
+
+eventCommunity OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If an SNMP trap is to be sent, it will be sent to
+ the SNMP community specified by this octet string."
+ ::= { eventEntry 4 }
+
+eventLastTimeSent OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this event
+ entry last generated an event. If this entry has
+ not generated any events, this value will be
+ zero."
+ ::= { eventEntry 5 }
+
+eventOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it.
+
+ If this object contains a string starting with 'monitor'
+ and has associated entries in the log table, all connected
+ management stations should retrieve those log entries,
+ as they may have significance to all management stations
+ connected to this device"
+ ::= { eventEntry 6 }
+
+eventStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this event entry.
+
+ If this object is not equal to valid(1), all associated
+ log entries shall be deleted by the agent."
+ ::= { eventEntry 7 }
+
+--
+logTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of events that have been logged."
+ ::= { event 2 }
+
+logEntry OBJECT-TYPE
+ SYNTAX LogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of data describing an event that has been
+ logged. For example, an instance of the logDescription
+ object might be named logDescription.6.47"
+ INDEX { logEventIndex, logIndex }
+ ::= { logTable 1 }
+
+LogEntry ::= SEQUENCE {
+ logEventIndex Integer32,
+ logIndex Integer32,
+ logTime TimeTicks,
+ logDescription DisplayString
+}
+
+logEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The event entry that generated this log
+ entry. The log identified by a particular
+ value of this index is associated with the same
+ eventEntry as identified by the same value
+ of eventIndex."
+ ::= { logEntry 1 }
+
+logIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the log table amongst those generated by the
+ same eventEntries. These indexes are
+ assigned beginning with 1 and increase by one
+ with each new log entry. The association
+ between values of logIndex and logEntries
+ is fixed for the lifetime of each logEntry.
+ The agent may choose to delete the oldest
+ instances of logEntry as required because of
+ lack of memory. It is an implementation-specific
+ matter as to when this deletion may occur."
+ ::= { logEntry 2 }
+
+logTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this log entry was created."
+ ::= { logEntry 3 }
+
+logDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An implementation dependent description of the
+ event that activated this log entry."
+ ::= { logEntry 4 }
+
+-- Remote Network Monitoring Traps
+
+rmonEventsV2 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "Definition point for RMON notifications."
+ ::= { rmon 0 }
+
+risingAlarm NOTIFICATION-TYPE
+ OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
+ alarmValue, alarmRisingThreshold }
+ STATUS current
+ DESCRIPTION
+ "The SNMP trap that is generated when an alarm
+ entry crosses its rising threshold and generates
+ an event that is configured for sending SNMP
+ traps."
+ ::= { rmonEventsV2 1 }
+
+fallingAlarm NOTIFICATION-TYPE
+ OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
+ alarmValue, alarmFallingThreshold }
+ STATUS current
+ DESCRIPTION
+ "The SNMP trap that is generated when an alarm
+ entry crosses its falling threshold and generates
+ an event that is configured for sending SNMP
+ traps."
+ ::= { rmonEventsV2 2 }
+
+-- Conformance information
+
+rmonCompliances OBJECT IDENTIFIER ::= { rmonConformance 9 }
+rmonGroups OBJECT IDENTIFIER ::= { rmonConformance 10 }
+
+-- Compliance Statements
+rmonCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The requirements for conformance to the RMON MIB. At least
+ one of the groups in this module must be implemented to
+ conform to the RMON MIB. Implementations of this MIB
+ must also implement the system group of MIB-II [16] and the
+ IF-MIB [17]."
+ MODULE -- this module
+
+ GROUP rmonEtherStatsGroup
+ DESCRIPTION
+ "The RMON Ethernet Statistics Group is optional."
+
+ GROUP rmonHistoryControlGroup
+ DESCRIPTION
+ "The RMON History Control Group is optional."
+
+ GROUP rmonEthernetHistoryGroup
+ DESCRIPTION
+ "The RMON Ethernet History Group is optional."
+
+ GROUP rmonAlarmGroup
+ DESCRIPTION
+ "The RMON Alarm Group is optional."
+
+ GROUP rmonHostGroup
+ DESCRIPTION
+ "The RMON Host Group is mandatory when the
+ rmonHostTopNGroup is implemented."
+
+ GROUP rmonHostTopNGroup
+ DESCRIPTION
+ "The RMON Host Top N Group is optional."
+
+ GROUP rmonMatrixGroup
+ DESCRIPTION
+ "The RMON Matrix Group is optional."
+
+ GROUP rmonFilterGroup
+ DESCRIPTION
+ "The RMON Filter Group is mandatory when the
+ rmonPacketCaptureGroup is implemented."
+
+ GROUP rmonPacketCaptureGroup
+ DESCRIPTION
+ "The RMON Packet Capture Group is optional."
+
+ GROUP rmonEventGroup
+ DESCRIPTION
+ "The RMON Event Group is mandatory when the
+ rmonAlarmGroup is implemented."
+ ::= { rmonCompliances 1 }
+
+ rmonEtherStatsGroup OBJECT-GROUP
+ OBJECTS {
+ etherStatsIndex, etherStatsDataSource,
+ etherStatsDropEvents, etherStatsOctets, etherStatsPkts,
+ etherStatsBroadcastPkts, etherStatsMulticastPkts,
+ etherStatsCRCAlignErrors, etherStatsUndersizePkts,
+ etherStatsOversizePkts, etherStatsFragments,
+ etherStatsJabbers, etherStatsCollisions,
+ etherStatsPkts64Octets, etherStatsPkts65to127Octets,
+ etherStatsPkts128to255Octets,
+ etherStatsPkts256to511Octets,
+ etherStatsPkts512to1023Octets,
+ etherStatsPkts1024to1518Octets,
+ etherStatsOwner, etherStatsStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Ethernet Statistics Group."
+ ::= { rmonGroups 1 }
+
+ rmonHistoryControlGroup OBJECT-GROUP
+ OBJECTS {
+ historyControlIndex, historyControlDataSource,
+ historyControlBucketsRequested,
+ historyControlBucketsGranted, historyControlInterval,
+ historyControlOwner, historyControlStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON History Control Group."
+ ::= { rmonGroups 2 }
+
+ rmonEthernetHistoryGroup OBJECT-GROUP
+ OBJECTS {
+ etherHistoryIndex, etherHistorySampleIndex,
+ etherHistoryIntervalStart, etherHistoryDropEvents,
+ etherHistoryOctets, etherHistoryPkts,
+ etherHistoryBroadcastPkts, etherHistoryMulticastPkts,
+ etherHistoryCRCAlignErrors, etherHistoryUndersizePkts,
+ etherHistoryOversizePkts, etherHistoryFragments,
+ etherHistoryJabbers, etherHistoryCollisions,
+ etherHistoryUtilization
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Ethernet History Group."
+ ::= { rmonGroups 3 }
+
+ rmonAlarmGroup OBJECT-GROUP
+ OBJECTS {
+ alarmIndex, alarmInterval, alarmVariable,
+ alarmSampleType, alarmValue, alarmStartupAlarm,
+ alarmRisingThreshold, alarmFallingThreshold,
+ alarmRisingEventIndex, alarmFallingEventIndex,
+ alarmOwner, alarmStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Alarm Group."
+ ::= { rmonGroups 4 }
+
+ rmonHostGroup OBJECT-GROUP
+ OBJECTS {
+ hostControlIndex, hostControlDataSource,
+ hostControlTableSize, hostControlLastDeleteTime,
+ hostControlOwner, hostControlStatus,
+ hostAddress, hostCreationOrder, hostIndex,
+ hostInPkts, hostOutPkts, hostInOctets,
+ hostOutOctets, hostOutErrors, hostOutBroadcastPkts,
+ hostOutMulticastPkts, hostTimeAddress,
+ hostTimeCreationOrder, hostTimeIndex,
+ hostTimeInPkts, hostTimeOutPkts, hostTimeInOctets,
+ hostTimeOutOctets, hostTimeOutErrors,
+ hostTimeOutBroadcastPkts, hostTimeOutMulticastPkts
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Host Group."
+ ::= { rmonGroups 5 }
+
+ rmonHostTopNGroup OBJECT-GROUP
+ OBJECTS {
+ hostTopNControlIndex, hostTopNHostIndex,
+ hostTopNRateBase, hostTopNTimeRemaining,
+ hostTopNDuration, hostTopNRequestedSize,
+ hostTopNGrantedSize, hostTopNStartTime,
+ hostTopNOwner, hostTopNStatus,
+ hostTopNReport, hostTopNIndex,
+ hostTopNAddress, hostTopNRate
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Host Top 'N' Group."
+ ::= { rmonGroups 6 }
+
+ rmonMatrixGroup OBJECT-GROUP
+ OBJECTS {
+ matrixControlIndex, matrixControlDataSource,
+ matrixControlTableSize, matrixControlLastDeleteTime,
+ matrixControlOwner, matrixControlStatus,
+ matrixSDSourceAddress, matrixSDDestAddress,
+ matrixSDIndex, matrixSDPkts,
+ matrixSDOctets, matrixSDErrors,
+ matrixDSSourceAddress, matrixDSDestAddress,
+ matrixDSIndex, matrixDSPkts,
+ matrixDSOctets, matrixDSErrors
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Matrix Group."
+ ::= { rmonGroups 7 }
+
+ rmonFilterGroup OBJECT-GROUP
+ OBJECTS {
+ filterIndex, filterChannelIndex, filterPktDataOffset,
+ filterPktData, filterPktDataMask,
+ filterPktDataNotMask, filterPktStatus,
+ filterPktStatusMask, filterPktStatusNotMask,
+ filterOwner, filterStatus,
+ channelIndex, channelIfIndex, channelAcceptType,
+ channelDataControl, channelTurnOnEventIndex,
+ channelTurnOffEventIndex, channelEventIndex,
+ channelEventStatus, channelMatches,
+ channelDescription, channelOwner, channelStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Filter Group."
+ ::= { rmonGroups 8 }
+
+ rmonPacketCaptureGroup OBJECT-GROUP
+ OBJECTS {
+ bufferControlIndex, bufferControlChannelIndex,
+ bufferControlFullStatus, bufferControlFullAction,
+ bufferControlCaptureSliceSize,
+ bufferControlDownloadSliceSize,
+ bufferControlDownloadOffset,
+ bufferControlMaxOctetsRequested,
+ bufferControlMaxOctetsGranted,
+ bufferControlCapturedPackets,
+ bufferControlTurnOnTime,
+ bufferControlOwner, bufferControlStatus,
+ captureBufferControlIndex, captureBufferIndex,
+ captureBufferPacketID, captureBufferPacketData,
+ captureBufferPacketLength, captureBufferPacketTime,
+ captureBufferPacketStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Packet Capture Group."
+ ::= { rmonGroups 9 }
+
+ rmonEventGroup OBJECT-GROUP
+ OBJECTS {
+ eventIndex, eventDescription, eventType,
+ eventCommunity, eventLastTimeSent,
+ eventOwner, eventStatus,
+ logEventIndex, logIndex, logTime,
+ logDescription
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Event Group."
+ ::= { rmonGroups 10 }
+
+ rmonNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { risingAlarm, fallingAlarm }
+ STATUS current
+ DESCRIPTION
+ "The RMON Notification Group."
+ ::= { rmonGroups 11 }
+END