aboutsummaryrefslogtreecommitdiffstats
path: root/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
diff options
context:
space:
mode:
Diffstat (limited to 'xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf')
-rw-r--r--xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf334
1 files changed, 167 insertions, 167 deletions
diff --git a/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf b/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
index 9379739744..f9fff0fa8e 100644
--- a/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
+++ b/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
@@ -1,258 +1,258 @@
-#### -*-shell-script-*-
-####
-#### %CopyrightBegin%
-####
-#### Copyright Ericsson AB 2009-2010. All Rights Reserved.
-####
-#### The contents of this file are subject to the Erlang Public License,
-#### Version 1.1, (the "License"); you may not use this file except in
-#### compliance with the License. You should have received a copy of the
-#### Erlang Public License along with this software. If not, it can be
-#### retrieved online at http://www.erlang.org/.
-####
-#### Software distributed under the License is distributed on an "AS IS"
-#### basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-#### the License for the specific language governing rights and limitations
-#### under the License.
-####
-#### %CopyrightEnd%
-####
-#### File: erl-xcomp-TileraMDE2.0-tilepro.conf
-#### Author: Rickard Green
-####
-#### --------------------------------------------------------------------------
-#### When cross compiling Erlang/OTP using `otp_build`, copy this file and set
-#### the variables needed below. Then pass the path to the copy of this file as
-#### an argument to `otp_build` in the configure stage:
-#### `otp_build configure --xcomp-conf=<FILE>`
-#### --------------------------------------------------------------------------
-
-### Note that you cannot define arbitrary variables in a cross compilation
-### configuration file. Only the ones listed below will be guaranteed to be
-### visible throughout the whole execution of all `configure` scripts. Other
-### variables needs to be defined as arguments to `configure` or exported in
-### the environment.
-
-### ### Variables for `otp_build` Only ###
-
-### Variables in this section are only used, when configuring Erlang/OTP for
-### cross compilation using `$ERL_TOP/otp_build configure`.
-
-### *NOTE*! These variables currently have *no* effect if you configure using
-### the `configure` script directly.
-
-## `erl_xcomp_build` - The build system used. This value will be passed as
-## `--build=$erl_xcomp_build` argument to the `configure` script. It does
-## not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full
-## `CPU-VENDOR-OS` triplet will be created by
-## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`.
-## If set to `guess`, the build system will be guessed using
-## `$ERL_TOP/erts/autoconf/config.guess`.
+## -*-shell-script-*-
+##
+## %CopyrightBegin%
+##
+## Copyright Ericsson AB 2009-2010. All Rights Reserved.
+##
+## The contents of this file are subject to the Erlang Public License,
+## Version 1.1, (the "License"); you may not use this file except in
+## compliance with the License. You should have received a copy of the
+## Erlang Public License along with this software. If not, it can be
+## retrieved online at http://www.erlang.org/.
+##
+## Software distributed under the License is distributed on an "AS IS"
+## basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+## the License for the specific language governing rights and limitations
+## under the License.
+##
+## %CopyrightEnd%
+##
+## File: erl-xcomp-TileraMDE2.0-tilepro.conf
+## Author: Rickard Green
+##
+## -----------------------------------------------------------------------------
+## When cross compiling Erlang/OTP using `otp_build', copy this file and set
+## the variables needed below. Then pass the path to the copy of this file as
+## an argument to `otp_build' in the configure stage:
+## `otp_build configure --xcomp-conf=<FILE>'
+## -----------------------------------------------------------------------------
+
+## Note that you cannot define arbitrary variables in a cross compilation
+## configuration file. Only the ones listed below will be guaranteed to be
+## visible throughout the whole execution of all `configure' scripts. Other
+## variables needs to be defined as arguments to `configure' or exported in
+## the environment.
+
+## -- Variables for `otp_build' Only -------------------------------------------
+
+## Variables in this section are only used, when configuring Erlang/OTP for
+## cross compilation using `$ERL_TOP/otp_build configure'.
+
+## *NOTE*! These variables currently have *no* effect if you configure using
+## the `configure' script directly.
+
+# * `erl_xcomp_build' - The build system used. This value will be passed as
+# `--build=$erl_xcomp_build' argument to the `configure' script. It does
+# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full
+# `CPU-VENDOR-OS' triplet will be created by
+# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess',
+# the build system will be guessed using
+# `$ERL_TOP/erts/autoconf/config.guess'.
erl_xcomp_build=guess
-## `erl_xcomp_host` - Cross host/target system to build for. This value will
-## be passed as `--host=$erl_xcomp_host` argument to the `configure` script.
-## It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The
-## full `CPU-VENDOR-OS` triplet will be created by:
-## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host`
+# * `erl_xcomp_host' - Cross host/target system to build for. This value will
+# be passed as `--host=$erl_xcomp_host' argument to the `configure' script.
+# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The
+# full `CPU-VENDOR-OS' triplet will be created by
+# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'.
erl_xcomp_host=tile
-## `erl_xcomp_configure_flags` - Extra configure flags to pass to the
-## `configure` script.
+# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the
+# `configure' script.
erl_xcomp_configure_flags="--without-termcap"
-### ### Cross Compiler and Other Tools ###
+## -- Cross Compiler and Other Tools -------------------------------------------
-### If the cross compilation tools are prefixed by `<HOST>-` you probably do
-### not need to set these variables (where `<HOST>` is what has been passed as
-### `--host=<HOST>` argument to `configure`).
+## If the cross compilation tools are prefixed by `<HOST>-' you probably do
+## not need to set these variables (where `<HOST>' is what has been passed as
+## `--host=<HOST>' argument to `configure').
-### All variables in this section can also be used when native compiling.
+## All variables in this section can also be used when native compiling.
-## `CC` - C compiler.
+# * `CC' - C compiler.
#CC=
-## `CFLAGS` - C compiler flags.
+# * `CFLAGS' - C compiler flags.
#CFLAGS=
-## `STATIC_CFLAGS` - Static C compiler flags.
+# * `STATIC_CFLAGS' - Static C compiler flags.
#STATIC_CFLAGS=
-## `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library
-## search path for the shared libraries. Note that this actually is a
-## linker flag, but it needs to be passed via the compiler.
+# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
+# search path for the shared libraries. Note that this actually is a
+# linker flag, but it needs to be passed via the compiler.
#CFLAG_RUNTIME_LIBRARY_PATH=
-## `CPP` - C pre-processor.
+# * `CPP' - C pre-processor.
#CPP=
-## `CPPFLAGS` - C pre-processor flags.
+# * `CPPFLAGS' - C pre-processor flags.
#CPPFLAGS=
-## `CXX` - C++ compiler.
+# * `CXX' - C++ compiler.
#CXX=
-## `CXXFLAGS` - C++ compiler flags.
+# * `CXXFLAGS' - C++ compiler flags.
#CXXFLAGS=
-## `LD` - Linker.
+# * `LD' - Linker.
#LD=
-## `LDFLAGS` - Linker flags.
+# * `LDFLAGS' - Linker flags.
#LDFLAGS=
-## `LIBS` - Libraries.
+# * `LIBS' - Libraries.
#LIBS=
-### #### *D*ynamic *E*rlang *D*river Linking ####
+## -- *D*ynamic *E*rlang *D*river Linking --
-### *NOTE*! Either set all or none of the `DED_LD*` variables.
+## *NOTE*! Either set all or none of the `DED_LD*' variables.
-## `DED_LD` - Linker for Dynamically loaded Erlang Drivers.
+# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers.
#DED_LD=
-## `DED_LDFLAGS` - Linker flags to use with `DED_LD`.
+# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'.
#DED_LDFLAGS=
-## `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library
-## search path for shared libraries when linking with `DED_LD`.
+# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
+# search path for shared libraries when linking with `DED_LD'.
#DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
-### #### Large File Support ####
+## -- Large File Support --
-### *NOTE*! Either set all or none of the `LFS_*` variables.
+## *NOTE*! Either set all or none of the `LFS_*' variables.
-## `LFS_CFLAGS` - Large file support C compiler flags.
+# * `LFS_CFLAGS' - Large file support C compiler flags.
#LFS_CFLAGS=
-## `LFS_LDFLAGS` - Large file support linker flags.
+# * `LFS_LDFLAGS' - Large file support linker flags.
#LFS_LDFLAGS=
-## `LFS_LIBS` - Large file support libraries.
+# * `LFS_LIBS' - Large file support libraries.
#LFS_LIBS=
-### #### Other Tools ####
+## -- Other Tools --
-## `RANLIB` - `ranlib` archive index tool.
+# * `RANLIB' - `ranlib' archive index tool.
#RANLIB=
-## `AR` - `ar` archiving tool.
+# * `AR' - `ar' archiving tool.
#AR=
-## `GETCONF` - `getconf` system configuration inspection tool. `getconf` is
-## currently used for finding out large file support flags to use, and
-## on Linux systems for finding out if we have an NPTL thread library or
-## not.
+# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is
+# currently used for finding out large file support flags to use, and
+# on Linux systems for finding out if we have an NPTL thread library or
+# not.
#GETCONF=
-### ### Cross System Root Locations ###
+## -- Cross System Root Locations ----------------------------------------------
-## `erl_xcomp_sysroot` - The absolute path to the system root of the cross
-## compilation environment. Currently, the `crypto`, `odbc`, `ssh` and
-## `ssl` applications need the system root. These applications will be
-## skipped if the system root has not been set. The system root might be
-## needed for other things too. If this is the case and the system root
-## has not been set, `configure` will fail and request you to set it.
+# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross
+# compilation environment. Currently, the `crypto', `odbc', `ssh' and
+# `ssl' applications need the system root. These applications will be
+# skipped if the system root has not been set. The system root might be
+# needed for other things too. If this is the case and the system root
+# has not been set, `configure' will fail and request you to set it.
erl_xcomp_sysroot="$TILERA_ROOT/tile"
-## `erl_xcomp_isysroot` - The absolute path to the system root for includes
-## of the cross compilation environment. If not set, this value defaults
-## to `$erl_xcomp_sysroot`, i.e., only set this value if the include system
-## root path is not the same as the system root path.
+# * `erl_xcomp_isysroot' - The absolute path to the system root for includes
+# of the cross compilation environment. If not set, this value defaults
+# to `$erl_xcomp_sysroot', i.e., only set this value if the include system
+# root path is not the same as the system root path.
#erl_xcomp_isysroot=
-### ### Optional Feature, and Bug Tests ###
+## -- Optional Feature, and Bug Tests ------------------------------------------
-### These tests cannot (always) be done automatically when cross compiling. You
-### usually do not need to set these variables. Only set these if you really
-### know what you are doing.
+## These tests cannot (always) be done automatically when cross compiling. You
+## usually do not need to set these variables. Only set these if you really
+## know what you are doing.
-### Note that some of these values will override results of tests performed
-### by `configure`, and some will not be used until `configure` is sure that
-### it cannot figure the result out.
+## Note that some of these values will override results of tests performed
+## by `configure', and some will not be used until `configure' is sure that
+## it cannot figure the result out.
-### The `configure` script will issue a warning when a default value is used.
-### When a variable has been set, no warning will be issued.
+## The `configure' script will issue a warning when a default value is used.
+## When a variable has been set, no warning will be issued.
-## `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`, the
-## target system must have a working `__after_morecore_hook` that can be
-## used for tracking used `malloc()` implementations core memory usage.
-## This is currently only used by unsupported features.
+# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes',
+# the target system must have a working `__after_morecore_hook' that can be
+# used for tracking used `malloc()' implementations core memory usage.
+# This is currently only used by unsupported features.
#erl_xcomp_after_morecore_hook=
-## `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system
-## must be big endian. If `no`, little endian. This can often be
-## automatically detected, but not always. If not automatically detected,
-## `configure` will fail unless this variable is set. Since no default
-## value is used, `configure` will try to figure this out automatically.
+# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system
+# must be big endian. If `no', little endian. This can often be
+# automatically detected, but not always. If not automatically detected,
+# `configure' will fail unless this variable is set. Since no default
+# value is used, `configure' will try to figure this out automatically.
#erl_xcomp_bigendian=
-## `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`,
-## the target system must have a working `clock_gettime()` implementation
-## that can be used for retrieving process CPU time.
+# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes',
+# the target system must have a working `clock_gettime()' implementation
+# that can be used for retrieving process CPU time.
#erl_xcomp_clock_gettime_cpu_time=
-## `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target
-## system must have a working `getaddrinfo()` implementation that can
-## handle both IPv4 and IPv6.
+# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target
+# system must have a working `getaddrinfo()' implementation that can
+# handle both IPv4 and IPv6.
erl_xcomp_getaddrinfo=yes
-## `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`,
-## the target system must have a working `gethrvtime()` implementation and
-## is used with procfs `ioctl()`.
+# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes',
+# the target system must have a working `gethrvtime()' implementation and
+# is used with procfs `ioctl()'.
#erl_xcomp_gethrvtime_procfs_ioctl=
-## `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the
-## target system must have a working `dlsym(RTLD_NEXT, <S>)` implementation
-## that can be used on `brk` and `sbrk` symbols used by the `malloc()`
-## implementation in use, and by this track the `malloc()` implementations
-## core memory usage. This is currently only used by unsupported features.
+# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the
+# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation
+# that can be used on `brk' and `sbrk' symbols used by the `malloc()'
+# implementation in use, and by this track the `malloc()' implementations
+# core memory usage. This is currently only used by unsupported features.
#erl_xcomp_dlsym_brk_wrappers=
-## `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target system
-## must have a working `kqueue()` implementation that returns a file
-## descriptor which can be used by `poll()` and/or `select()`. If `no` and
-## the target system has not got `epoll()` or `/dev/poll`, the kernel-poll
-## feature will be disabled.
+# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target
+# system must have a working `kqueue()' implementation that returns a file
+# descriptor which can be used by `poll()' and/or `select()'. If `no' and
+# the target system has not got `epoll()' or `/dev/poll', the kernel-poll
+# feature will be disabled.
#erl_xcomp_kqueue=
-## `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on
-## Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on
-## the target system must work. This variable is recommended to be set to
-## `no` on Linux systems with kernel versions less than 2.6.
+# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on
+# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on
+# the target system must work. This variable is recommended to be set to
+# `no' on Linux systems with kernel versions less than 2.6.
#erl_xcomp_linux_clock_gettime_correction=
-## `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise,
-## `no`. If `yes`, the target system must have NPTL (Native POSIX Thread
-## Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
-## kernel versions typically less than 2.6).
+# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise,
+# `no'. If `yes', the target system must have NPTL (Native POSIX Thread
+# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
+# kernel versions typically less than 2.6).
#erl_xcomp_linux_nptl=
-## `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux;
-## otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target
-## system. `sigaltstack()` on Linux kernel versions less than 2.4 are
-## broken.
+# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux;
+# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target
+# system. `sigaltstack()' on Linux kernel versions less than 2.4 are
+# broken.
#erl_xcomp_linux_usable_sigaltstack=
-## `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`,
-## the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old
-## LinuxThreads thread libraries (Linux kernel versions typically less than
-## 2.2) used these signals and made them unusable by the ERTS.
+# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes',
+# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old
+# LinuxThreads thread libraries (Linux kernel versions typically less than
+# 2.2) used these signals and made them unusable by the ERTS.
#erl_xcomp_linux_usable_sigusrx=
-## `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise,
-## `yes`. If `yes`, the target system must have a working `poll()`
-## implementation that also can handle devices. If `no`, `select()` will be
-## used instead of `poll()`.
+# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise,
+# `yes'. If `yes', the target system must have a working `poll()'
+# implementation that also can handle devices. If `no', `select()' will be
+# used instead of `poll()'.
#erl_xcomp_poll=
-## `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target
-## system must have a `putenv()` implementation that stores a copy of the
-## key/value pair.
+# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target
+# system must have a `putenv()' implementation that stores a copy of the
+# key/value pair.
#erl_xcomp_putenv_copy=
-## `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target
-## system must have reliable floating point exceptions.
+# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target
+# system must have reliable floating point exceptions.
#erl_xcomp_reliable_fpe=
-####
+## -----------------------------------------------------------------------------