aboutsummaryrefslogtreecommitdiffstats
path: root/xcomp
diff options
context:
space:
mode:
Diffstat (limited to 'xcomp')
-rw-r--r--xcomp/erl-xcomp-powerpc-ose5.conf358
-rw-r--r--xcomp/erl-xcomp-sfk-linux-ose5.conf305
-rw-r--r--xcomp/erl-xcomp-vars.sh2
3 files changed, 1 insertions, 664 deletions
diff --git a/xcomp/erl-xcomp-powerpc-ose5.conf b/xcomp/erl-xcomp-powerpc-ose5.conf
deleted file mode 100644
index 88b2135593..0000000000
--- a/xcomp/erl-xcomp-powerpc-ose5.conf
+++ /dev/null
@@ -1,358 +0,0 @@
-## -*-shell-script-*-
-##
-## %CopyrightBegin%
-##
-## Copyright Ericsson AB 2009-2012. All Rights Reserved.
-##
-## Licensed under the Apache License, Version 2.0 (the "License");
-## you may not use this file except in compliance with the License.
-## You may obtain a copy of the License at
-##
-## http://www.apache.org/licenses/LICENSE-2.0
-##
-## Unless required by applicable law or agreed to in writing, software
-## distributed under the License is distributed on an "AS IS" BASIS,
-## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-## See the License for the specific language governing permissions and
-## limitations under the License.
-##
-## %CopyrightEnd%
-##
-## File: erl-xcomp-sfk-linux-ose5.conf
-## Author: Petre Pircalabu
-##
-## -----------------------------------------------------------------------------
-## When cross compiling Erlang/OTP using `otp_build', copy this file and set
-## the variables needed below. Then pass the path to the copy of this file as
-## an argument to `otp_build' in the configure stage:
-## `otp_build configure --xcomp-conf=<FILE>'
-## -----------------------------------------------------------------------------
-
-## Note that you cannot define arbitrary variables in a cross compilation
-## configuration file. Only the ones listed below will be guaranteed to be
-## visible throughout the whole execution of all `configure' scripts. Other
-## variables needs to be defined as arguments to `configure' or exported in
-## the environment.
-
-## -- Variables needed for an OSE5 build ---------------------------------------
-OSEROOT="/vobs/ose5/system"
-HOST="linux"
-
-GCCVERSION="4.4.3"
-GCCROOT="${OSEROOT}/gcc_linux_powerpc_${GCCVERSION}"
-
-OSEDEBUG="no"
-OSESSL="no"
-
-case ${GCCVERSION} in
-4.4.3)
- GCCTARGET="powerpc-eabi"
- ;;
-4.6.3)
- GCCTARGET="powerpc-ose-eabi"
- ;;
-*)
- echo "Error: Unknown GCCVERSION: ${GCCVERSION}"
- exit 1
-esac
-
-if [ ${OSEDEBUG} != "yes" ];
-then
-OPT_LEVEL="-O2"
-else
-OPT_LEVEL=""
-fi
-
-if [ ${OSESSL} = "yes" ];
-then
-## If your crypto is not in OSEROOT then you have to use --with-ssl to
-## point to the correct place. Also CRYPTO_LIB_PATH has to be modified to
-## point there as well.
-CRYPTO_CONFIG_OPTION="--disable-dynamic-ssl-lib"
-CRYPTO_NIF_PATH=",$ERL_TOP/lib/crypto/priv/lib/powerpc-unknown-ose/crypto.a"
-CRYPTO_LIB_PATH="${OSEROOT}/lib/powerpc/libsslcrypto.a"
-else
-CRYPTO_CONFIG_OPTION="--without-ssl"
-CRYPTO_NIF_PATH=""
-CRYPTO_LIB_PATH=""
-fi
-
-
-## -- Variables for `otp_build' Only -------------------------------------------
-
-## Variables in this section are only used, when configuring Erlang/OTP for
-## cross compilation using `$ERL_TOP/otp_build configure'.
-
-## *NOTE*! These variables currently have *no* effect if you configure using
-## the `configure' script directly.
-
-# * `erl_xcomp_build' - The build system used. This value will be passed as
-# `--build=$erl_xcomp_build' argument to the `configure' script. It does
-# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full
-# `CPU-VENDOR-OS' triplet will be created by
-# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess',
-# the build system will be guessed using
-# `$ERL_TOP/erts/autoconf/config.guess'.
-erl_xcomp_build=guess
-
-# * `erl_xcomp_host' - Cross host/target system to build for. This value will
-# be passed as `--host=$erl_xcomp_host' argument to the `configure' script.
-# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The
-# full `CPU-VENDOR-OS' triplet will be created by
-# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'.
-erl_xcomp_host="powerpc-ose"
-
-disabled_apps="--without-erl_interface --without-os_mon --without-megaco --without-observer --without-wx --without-appmon --without-cosEvent --without-cosEventDomain --without-cosFileTransfer --without-cosNotification --without-cosProperty --without-cosTime --without-cosTransactions --without-debugger --without-dialyzer --without-edoc --without-erl_docgen --without-eunit --without-gs --without-hipe --without-ic --without-orber --without-pman --without-toolbar --without-tv --without-webtool --without-typer"
-
-# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the
-# `configure' script.
-erl_xcomp_configure_flags="${CRYPTO_CONFIG_OPTION} --disable-kernel-poll --disable-hipe --without-termcap --without-javac ${disabled_apps} --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a${CRYPTO_NIF_PATH}"
-
-## -- Cross Compiler and Other Tools -------------------------------------------
-
-## If the cross compilation tools are prefixed by `<HOST>-' you probably do
-## not need to set these variables (where `<HOST>' is what has been passed as
-## `--host=<HOST>' argument to `configure').
-
-## All variables in this section can also be used when native compiling.
-
-# * `CC' - C compiler.
-CC="$GCCROOT/bin/$GCCTARGET-gcc"
-
-# * `CFLAGS' - C compiler flags.
-CFLAGS="-msoft-float -g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -mpowerpc -nostdlib -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DBIG_ENDIAN -DCF_CONF_SIZE=0x800 ${OPT_LEVEL}"
-
-
-# * `STATIC_CFLAGS' - Static C compiler flags.
-#STATIC_CFLAGS=
-
-# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
-# search path for the shared libraries. Note that this actually is a
-# linker flag, but it needs to be passed via the compiler.
-#CFLAG_RUNTIME_LIBRARY_PATH=
-
-# * `CPP' - C pre-processor.
-CPP="$GCCROOT/bin/$GCCTARGET-cpp"
-
-# * `CPPFLAGS' - C pre-processor flags.
-CPPFLAGS="-msoft-float -g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -mpowerpc -nostdlib -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DBIG_ENDIAN -DCF_CONF_SIZE=0x800 ${OPT_LEVEL}"
-
-
-# * `CXX' - C++ compiler.
-CXX="$GCCROOT/bin/$GCCTARGET-g++"
-
-# * `CXXFLAGS' - C++ compiler flags.
-CXXFLAGS="-msoft-float -g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc ${OPT_LEVEL}"
-
-# * `LD' - Linker.
-LD="${GCCROOT}/bin/${GCCTARGET}-ld"
-
-# * `LDFLAGS' - Linker flags.
-LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,${ERL_TOP}/erts/emulator/sys/ose/gcc_${GCCVERSION}_lm_ppc.lcf"
-
-# * `LIBS' - Libraries.
-LIBS="${OSEROOT}/lib/powerpc/libcrt.a ${OSEROOT}/lib/powerpc/libm.a ${GCCROOT}/lib/gcc/${GCCTARGET}/${GCCVERSION}/nof/libgcc.a ${CRYPTO_LIB_PATH}"
-
-## -- *D*ynamic *E*rlang *D*river Linking --
-
-## *NOTE*! Either set all or none of the `DED_LD*' variables.
-
-# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers.
-DED_LD=
-
-# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'.
-DED_LDFLAGS=
-
-# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
-# search path for shared libraries when linking with `DED_LD'.
-DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
-
-## -- Large File Support --
-
-## *NOTE*! Either set all or none of the `LFS_*' variables.
-
-# * `LFS_CFLAGS' - Large file support C compiler flags.
-#LFS_CFLAGS=
-
-# * `LFS_LDFLAGS' - Large file support linker flags.
-#LFS_LDFLAGS=
-
-# * `LFS_LIBS' - Large file support libraries.
-#LFS_LIBS=
-
-## -- Other Tools --
-
-# * `RANLIB' - `ranlib' archive index tool.
-RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib"
-
-# * `AR' - `ar' archiving tool.
-AR="$GCCROOT/bin/$GCCTARGET-ar"
-
-# * `STRIP' - `strip
-STRIP="$GCCROOT/bin/$GCCTARGET-strip"
-
-# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is
-# currently used for finding out large file support flags to use, and
-# on Linux systems for finding out if we have an NPTL thread library or
-# not.
-#GETCONF=
-
-## -- Cross System Root Locations ----------------------------------------------
-
-# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross
-# compilation environment. Currently, the `crypto', `odbc', `ssh' and
-# `ssl' applications need the system root. These applications will be
-# skipped if the system root has not been set. The system root might be
-# needed for other things too. If this is the case and the system root
-# has not been set, `configure' will fail and request you to set it.
-erl_xcomp_sysroot="$OSEROOT"
-
-# * `erl_xcomp_isysroot' - The absolute path to the system root for includes
-# of the cross compilation environment. If not set, this value defaults
-# to `$erl_xcomp_sysroot', i.e., only set this value if the include system
-# root path is not the same as the system root path.
-#erl_xcomp_isysroot="$OSEROOT"
-
-## -- Optional Feature, and Bug Tests ------------------------------------------
-
-## These tests cannot (always) be done automatically when cross compiling. You
-## usually do not need to set these variables. Only set these if you really
-## know what you are doing.
-
-## Note that some of these values will override results of tests performed
-## by `configure', and some will not be used until `configure' is sure that
-## it cannot figure the result out.
-
-## The `configure' script will issue a warning when a default value is used.
-## When a variable has been set, no warning will be issued.
-
-# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes',
-# the target system must have a working `__after_morecore_hook' that can be
-# used for tracking used `malloc()' implementations core memory usage.
-# This is currently only used by unsupported features.
-#erl_xcomp_after_morecore_hook=
-
-# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system
-# must be big endian. If `no', little endian. This can often be
-# automatically detected, but not always. If not automatically detected,
-# `configure' will fail unless this variable is set. Since no default
-# value is used, `configure' will try to figure this out automatically.
-#erl_xcomp_bigendian=
-
-# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the
-# target system must have doubles in "middle-endian" format. If
-# `no`, it has "regular" endianness. This can often be automatically
-# detected, but not always. If not automatically detected,
-# `configure` will fail unless this variable is set. Since no
-# default value is used, `configure` will try to figure this out
-# automatically.
-#erl_xcomp_double_middle_endian
-
-# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes',
-# the target system must have a working `clock_gettime()' implementation
-# that can be used for retrieving process CPU time.
-#erl_xcomp_clock_gettime_cpu_time=
-
-# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have a working `getaddrinfo()' implementation that can
-# handle both IPv4 and IPv6.
-#erl_xcomp_getaddrinfo=
-
-# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes',
-# the target system must have a working `gethrvtime()' implementation and
-# is used with procfs `ioctl()'.
-#erl_xcomp_gethrvtime_procfs_ioctl=
-
-# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the
-# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation
-# that can be used on `brk' and `sbrk' symbols used by the `malloc()'
-# implementation in use, and by this track the `malloc()' implementations
-# core memory usage. This is currently only used by unsupported features.
-#erl_xcomp_dlsym_brk_wrappers=
-
-# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have a working `kqueue()' implementation that returns a file
-# descriptor which can be used by `poll()' and/or `select()'. If `no' and
-# the target system has not got `epoll()' or `/dev/poll', the kernel-poll
-# feature will be disabled.
-#erl_xcomp_kqueue=
-
-# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on
-# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on
-# the target system must work. This variable is recommended to be set to
-# `no' on Linux systems with kernel versions less than 2.6.
-#erl_xcomp_linux_clock_gettime_correction=
-
-# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise,
-# `no'. If `yes', the target system must have NPTL (Native POSIX Thread
-# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
-# kernel versions typically less than 2.6).
-#erl_xcomp_linux_nptl=
-
-# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux;
-# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target
-# system. `sigaltstack()' on Linux kernel versions less than 2.4 are
-# broken.
-#erl_xcomp_linux_usable_sigaltstack=
-
-# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes',
-# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old
-# LinuxThreads thread libraries (Linux kernel versions typically less than
-# 2.2) used these signals and made them unusable by the ERTS.
-#erl_xcomp_linux_usable_sigusrx=
-
-# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise,
-# `yes'. If `yes', the target system must have a working `poll()'
-# implementation that also can handle devices. If `no', `select()' will be
-# used instead of `poll()'.
-erl_xcomp_poll=no
-
-# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have a `putenv()' implementation that stores a copy of the
-# key/value pair.
-#erl_xcomp_putenv_copy=
-
-# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have reliable floating point exceptions.
-#erl_xcomp_reliable_fpe=
-# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1)
-erl_xcomp_ose_ldflags_pass1="-r --no-omagic"
-
-# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2)
-erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic"
-
-# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory
-erl_xcomp_ose_OSEROOT="${OSEROOT}"
-
-# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution
-erl_xcomp_ose_STRIP="${GCCROOT}/bin/${GCCTARGET}-strip"
-
-# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool
-erl_xcomp_ose_LM_POST_LINK="${OSEROOT}/bin/${HOST}/lm_post_link"
-
-# * `erl_xcomp_ose_LM_SET_CONF` - Sets the configuration for an OSE load module
-erl_xcomp_ose_LM_SET_CONF="${OSEROOT}/bin/${HOST}/lm_set_conf"
-
-# * `erl_xcomp_ose_LM_ELF_SIZE` - OSE load module elf size tool
-erl_xcomp_ose_LM_ELF_SIZE="${OSEROOT}/bin/${HOST}/lm_elf_size"
-
-# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file
-erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_${GCCVERSION}_lm_ppc.lcf"
-
-# * `erl_xcomp_ose_BEAM_LM_CONF` - beam OSE load module configuration file
-erl_xcomp_ose_BEAM_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/beam.lmconf"
-
-# * `erl_xcomp_ose_RUN_ERL_LM_CONF` - run_erl_lm OSE load module configuration file
-erl_xcomp_ose_RUN_ERL_LM_CONF="${ERL_TOP}/erts/etc/ose/etc.lmconf"
-
-# * `erl_xcomp_ose_EPMD_LM_CONF` - epmd OSE load module configuration file
-erl_xcomp_ose_EPMD_LM_CONF="${ERL_TOP}/erts/etc/ose/etc.lmconf"
-
-# * `erl_xcomp_ose_CONFD` - OSE confd source file
-erl_xcomp_ose_CONFD="${OSEROOT}/src/ose_confd.c"
-
-# * `erl_xcomp_ose_CRT0_LM` - OSE crt0 lm source file
-erl_xcomp_ose_CRT0_LM="${OSEROOT}/src/crt0_lm.c"
-
-
-## -----------------------------------------------------------------------------
diff --git a/xcomp/erl-xcomp-sfk-linux-ose5.conf b/xcomp/erl-xcomp-sfk-linux-ose5.conf
deleted file mode 100644
index a4d64e5636..0000000000
--- a/xcomp/erl-xcomp-sfk-linux-ose5.conf
+++ /dev/null
@@ -1,305 +0,0 @@
-## -*-shell-script-*-
-##
-## %CopyrightBegin%
-##
-## Copyright Ericsson AB 2009-2012. All Rights Reserved.
-##
-## Licensed under the Apache License, Version 2.0 (the "License");
-## you may not use this file except in compliance with the License.
-## You may obtain a copy of the License at
-##
-## http://www.apache.org/licenses/LICENSE-2.0
-##
-## Unless required by applicable law or agreed to in writing, software
-## distributed under the License is distributed on an "AS IS" BASIS,
-## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-## See the License for the specific language governing permissions and
-## limitations under the License.
-##
-## %CopyrightEnd%
-##
-## File: erl-xcomp-sfk-linux-ose5.conf
-## Author: Petre Pircalabu
-##
-## -----------------------------------------------------------------------------
-## When cross compiling Erlang/OTP using `otp_build', copy this file and set
-## the variables needed below. Then pass the path to the copy of this file as
-## an argument to `otp_build' in the configure stage:
-## `otp_build configure --xcomp-conf=<FILE>'
-## -----------------------------------------------------------------------------
-
-## Note that you cannot define arbitrary variables in a cross compilation
-## configuration file. Only the ones listed below will be guaranteed to be
-## visible throughout the whole execution of all `configure' scripts. Other
-## variables needs to be defined as arguments to `configure' or exported in
-## the environment.
-
-## -- Variables needed for an OSE5 build ---------------------------------------
-OSEROOT="/vobs/ose5/system"
-HOST="linux"
-GCCVERSION="4.6.3"
-GCCROOT="${OSEROOT}/gcc_linux_x86_${GCCVERSION}"
-GCCTARGET="i386-elf"
-
-## -- Variables for `otp_build' Only -------------------------------------------
-
-## Variables in this section are only used, when configuring Erlang/OTP for
-## cross compilation using `$ERL_TOP/otp_build configure'.
-
-## *NOTE*! These variables currently have *no* effect if you configure using
-## the `configure' script directly.
-
-# * `erl_xcomp_build' - The build system used. This value will be passed as
-# `--build=$erl_xcomp_build' argument to the `configure' script. It does
-# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full
-# `CPU-VENDOR-OS' triplet will be created by
-# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess',
-# the build system will be guessed using
-# `$ERL_TOP/erts/autoconf/config.guess'.
-erl_xcomp_build=guess
-
-# * `erl_xcomp_host' - Cross host/target system to build for. This value will
-# be passed as `--host=$erl_xcomp_host' argument to the `configure' script.
-# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The
-# full `CPU-VENDOR-OS' triplet will be created by
-# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'.
-erl_xcomp_host="$GCCTARGET-ose"
-
-# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the
-# `configure' script.
-erl_xcomp_configure_flags="--disable-threads --disable-smp-support --disable-kernel-poll --disable-hipe --without-termcap --without-javac --disable-dynamic-ssl-lib --disable-shared-zlib --without-ssl --enable-static-nifs --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a"
-
-## -- Cross Compiler and Other Tools -------------------------------------------
-
-## If the cross compilation tools are prefixed by `<HOST>-' you probably do
-## not need to set these variables (where `<HOST>' is what has been passed as
-## `--host=<HOST>' argument to `configure').
-
-## All variables in this section can also be used when native compiling.
-
-# * `CC' - C compiler.
-CC="$GCCROOT/bin/$GCCTARGET-gcc"
-
-# * `CFLAGS' - C compiler flags.
-CFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800"
-
-# * `STATIC_CFLAGS' - Static C compiler flags.
-#STATIC_CFLAGS=
-
-# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
-# search path for the shared libraries. Note that this actually is a
-# linker flag, but it needs to be passed via the compiler.
-#CFLAG_RUNTIME_LIBRARY_PATH=
-
-# * `CPP' - C pre-processor.
-#CPP=
-
-# * `CPPFLAGS' - C pre-processor flags.
-CPPFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800"
-
-# * `CXX' - C++ compiler.
-#CXX=
-
-# * `CXXFLAGS' - C++ compiler flags.
-CXXFLAGS="-g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc "
-
-# * `LD' - Linker.
-LD="$GCCROOT/bin/$GCCTARGET-ld"
-
-# * `LDFLAGS' - Linker flags.
-LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,$ERL_TOP/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf"
-
-# * `LIBS' - Libraries.
-LIBS="$OSEROOT/lib/x86/libcrt.a $OSEROOT/lib/x86/libm.a $GCCROOT/lib/gcc/$GCCTARGET/$GCCVERSION/libgcc.a"
-
-## -- *D*ynamic *E*rlang *D*river Linking --
-
-## *NOTE*! Either set all or none of the `DED_LD*' variables.
-
-# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers.
-#DED_LD=
-
-# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'.
-#DED_LDFLAGS=
-
-# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
-# search path for shared libraries when linking with `DED_LD'.
-#DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
-
-## -- Large File Support --
-
-## *NOTE*! Either set all or none of the `LFS_*' variables.
-
-# * `LFS_CFLAGS' - Large file support C compiler flags.
-#LFS_CFLAGS=
-
-# * `LFS_LDFLAGS' - Large file support linker flags.
-#LFS_LDFLAGS=
-
-# * `LFS_LIBS' - Large file support libraries.
-#LFS_LIBS=
-
-## -- Other Tools --
-
-# * `RANLIB' - `ranlib' archive index tool.
-RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib"
-
-# * `AR' - `ar' archiving tool.
-AR="$GCCROOT/bin/$GCCTARGET-ar"
-
-# * `STRIP' - `strip
-STRIP="$GCCROOT/bin/$GCCTARGET-strip"
-
-# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is
-# currently used for finding out large file support flags to use, and
-# on Linux systems for finding out if we have an NPTL thread library or
-# not.
-#GETCONF=
-
-## -- Cross System Root Locations ----------------------------------------------
-
-# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross
-# compilation environment. Currently, the `crypto', `odbc', `ssh' and
-# `ssl' applications need the system root. These applications will be
-# skipped if the system root has not been set. The system root might be
-# needed for other things too. If this is the case and the system root
-# has not been set, `configure' will fail and request you to set it.
-erl_xcomp_sysroot="$OSEROOT"
-
-# * `erl_xcomp_isysroot' - The absolute path to the system root for includes
-# of the cross compilation environment. If not set, this value defaults
-# to `$erl_xcomp_sysroot', i.e., only set this value if the include system
-# root path is not the same as the system root path.
-erl_xcomp_isysroot="$OSEROOT/include"
-
-## -- Optional Feature, and Bug Tests ------------------------------------------
-
-## These tests cannot (always) be done automatically when cross compiling. You
-## usually do not need to set these variables. Only set these if you really
-## know what you are doing.
-
-## Note that some of these values will override results of tests performed
-## by `configure', and some will not be used until `configure' is sure that
-## it cannot figure the result out.
-
-## The `configure' script will issue a warning when a default value is used.
-## When a variable has been set, no warning will be issued.
-
-# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes',
-# the target system must have a working `__after_morecore_hook' that can be
-# used for tracking used `malloc()' implementations core memory usage.
-# This is currently only used by unsupported features.
-#erl_xcomp_after_morecore_hook=
-
-# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system
-# must be big endian. If `no', little endian. This can often be
-# automatically detected, but not always. If not automatically detected,
-# `configure' will fail unless this variable is set. Since no default
-# value is used, `configure' will try to figure this out automatically.
-#erl_xcomp_bigendian=
-
-# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the
-# target system must have doubles in "middle-endian" format. If
-# `no`, it has "regular" endianness. This can often be automatically
-# detected, but not always. If not automatically detected,
-# `configure` will fail unless this variable is set. Since no
-# default value is used, `configure` will try to figure this out
-# automatically.
-#erl_xcomp_double_middle_endian
-
-# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes',
-# the target system must have a working `clock_gettime()' implementation
-# that can be used for retrieving process CPU time.
-#erl_xcomp_clock_gettime_cpu_time=
-
-# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have a working `getaddrinfo()' implementation that can
-# handle both IPv4 and IPv6.
-#erl_xcomp_getaddrinfo=
-
-# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes',
-# the target system must have a working `gethrvtime()' implementation and
-# is used with procfs `ioctl()'.
-#erl_xcomp_gethrvtime_procfs_ioctl=
-
-# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the
-# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation
-# that can be used on `brk' and `sbrk' symbols used by the `malloc()'
-# implementation in use, and by this track the `malloc()' implementations
-# core memory usage. This is currently only used by unsupported features.
-#erl_xcomp_dlsym_brk_wrappers=
-
-# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have a working `kqueue()' implementation that returns a file
-# descriptor which can be used by `poll()' and/or `select()'. If `no' and
-# the target system has not got `epoll()' or `/dev/poll', the kernel-poll
-# feature will be disabled.
-#erl_xcomp_kqueue=
-
-# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on
-# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on
-# the target system must work. This variable is recommended to be set to
-# `no' on Linux systems with kernel versions less than 2.6.
-#erl_xcomp_linux_clock_gettime_correction=
-
-# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise,
-# `no'. If `yes', the target system must have NPTL (Native POSIX Thread
-# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
-# kernel versions typically less than 2.6).
-#erl_xcomp_linux_nptl=
-
-# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux;
-# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target
-# system. `sigaltstack()' on Linux kernel versions less than 2.4 are
-# broken.
-#erl_xcomp_linux_usable_sigaltstack=
-
-# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes',
-# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old
-# LinuxThreads thread libraries (Linux kernel versions typically less than
-# 2.2) used these signals and made them unusable by the ERTS.
-#erl_xcomp_linux_usable_sigusrx=
-
-# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise,
-# `yes'. If `yes', the target system must have a working `poll()'
-# implementation that also can handle devices. If `no', `select()' will be
-# used instead of `poll()'.
-erl_xcomp_poll=no
-
-# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have a `putenv()' implementation that stores a copy of the
-# key/value pair.
-#erl_xcomp_putenv_copy=
-
-# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target
-# system must have reliable floating point exceptions.
-#erl_xcomp_reliable_fpe=
-
-# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1)
-erl_xcomp_ose_ldflags_pass1="-r --no-omagic"
-
-# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2)
-erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic"
-
-# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory
-erl_xcomp_ose_OSEROOT="$OSEROOT"
-
-# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution
-erl_xcomp_ose_STRIP="$GCCROOT/bin/$GCCTARGET-strip"
-
-# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool
-erl_xcomp_ose_LM_POST_LINK="$OSEROOT/bin/$HOST/lm_post_link"
-
-# * `erl_xcomp_ose_LM_SET_CONF` - OSE load module configuration tool
-erl_xcomp_ose_LM_SET_CONF="$OSEROOT/bin/$HOST/lm_set_conf"
-
-# * `erl_xcomp_ose_LM_GET_CONF` - OSE load module elf size tool
-erl_xcomp_ose_LM_ELF_SIZE="$OSEROOT/bin/$HOST/lm_elf_size"
-
-# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file
-erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf"
-
-# * `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file
-erl_xcomp_ose_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/default.lmconf"
-
-## -----------------------------------------------------------------------------
diff --git a/xcomp/erl-xcomp-vars.sh b/xcomp/erl-xcomp-vars.sh
index 0443867341..e864f7b96b 100644
--- a/xcomp/erl-xcomp-vars.sh
+++ b/xcomp/erl-xcomp-vars.sh
@@ -27,4 +27,4 @@
# and precious variables in $ERL_TOP/erts/aclocal.m4.
#
-erl_xcomp_vars="erl_xcomp_sysroot erl_xcomp_isysroot erl_xcomp_bigendian erl_xcomp_double_middle_endian erl_xcomp_linux_clock_gettime_correction erl_xcomp_linux_nptl erl_xcomp_linux_usable_sigusrx erl_xcomp_linux_usable_sigaltstack erl_xcomp_poll erl_xcomp_kqueue erl_xcomp_putenv_copy erl_xcomp_reliable_fpe erl_xcomp_getaddrinfo erl_xcomp_gethrvtime_procfs_ioctl erl_xcomp_clock_gettime_cpu_time erl_xcomp_after_morecore_hook erl_xcomp_dlsym_brk_wrappers erl_xcomp_posix_memalign erl_xcomp_ose_ldflags_pass1 erl_xcomp_ose_ldflags_pass2 erl_xcomp_ose_OSEROOT erl_xcomp_ose_STRIP erl_xcomp_ose_LM_POST_LINK erl_xcomp_ose_LM_SET_CONF erl_xcomp_ose_LM_GET_CONF erl_xcomp_ose_LM_ELF_SIZE erl_xcomp_ose_LM_LCF erl_xcomp_ose_BEAM_LM_CONF erl_xcomp_ose_EPMD_LM_CONF erl_xcomp_ose_RUN_ERL_LM_CONF erl_xcomp_ose_CONFD erl_xcomp_ose_CRT0_LM"
+erl_xcomp_vars="erl_xcomp_sysroot erl_xcomp_isysroot erl_xcomp_bigendian erl_xcomp_double_middle_endian erl_xcomp_linux_clock_gettime_correction erl_xcomp_linux_nptl erl_xcomp_linux_usable_sigusrx erl_xcomp_linux_usable_sigaltstack erl_xcomp_poll erl_xcomp_kqueue erl_xcomp_putenv_copy erl_xcomp_reliable_fpe erl_xcomp_getaddrinfo erl_xcomp_gethrvtime_procfs_ioctl erl_xcomp_clock_gettime_cpu_time erl_xcomp_after_morecore_hook erl_xcomp_dlsym_brk_wrappers erl_xcomp_posix_memalign"