| Age | Commit message (Collapse) | Author |
|---|
|
In https://bugs.gentoo.org/686786 gcc-9.1.0 exposed
a bug in erts/configure: if compiler does not support
PGO flags the configure process calls 'yes = yes'
(indefinite loop) instead of 'test yes = yes'.
The change does not fix gcc-9.1.0 PGO detection but
fixes ./configure termination.
Reported-by: Dennis Schridde
Bug: https://bugs.gentoo.org/686786
Signed-off-by: Sergei Trofimovich <[email protected]>
|
|
Explicitly autoconf check for functions localtime_r and
strftime, which are used in prettyfying timestamps. Also
make use of the results from these checks (HAVE_...)
If not found, timestamps will just be an integer
(which is better then nothing).
OTP-15566
|
|
* lukas/OTP-22/misc-fixes/OTP-15788:
erts: Fix PGO configure test for gcc
|
|
The problem was that some on some platforms -fprofile-generate
does not imply -lgcov which means that it will not
link.
|
|
The config options --[en|dis]able-esock now works as
expected.
|
|
Preliminary work to make socket configurable (enable and disable).
OTP-15658
|
|
|
|
* rickard/make-fixes-21/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-20/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-19/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-18/OTP-15657:
Remove own configured RM make variable
|
|
* rickard/make-fixes-17/OTP-15657:
Remove own configured RM make variable
|
|
Instead rely on gnu make's pre-defined RM variable which should
equal 'rm -f'
|
|
* rickard/make-fixes-21/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-20/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-19/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-18/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
* rickard/make-fixes-17/OTP-15551:
Fix install phase in build system
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
- Install of (mainly) documentation caused rebuild and
modification of the source tree even when the source
previously had been built. Also otp_patch_apply
modified the source tree when updating documentation.
This messed up the installation if installation was
performed by another user than the user that originally
built the system which not is an uncommon scenario.
- Some documentation was installed by copying files
instead of installing the files which caused faulty
access rights on files.
- The documentation was not properly updated when
applying a patch using otp_patch_apply.
|
|
bmk/20190204/socket_as_nif/OTP-14831
|
|
jhogberg/john/erts/mark-pooled-free-blocks-unused/OTP-15075
Mark free blocks in pooled carriers as unused
|
|
This lets the OS reclaim the physical memory associated with these
blocks which reduces the impact of long-lived awkward allocations.
A small allocated block will still keep a huge carrier alive, but
the unused part of the carrier will now be available to the OS.
Co-authored-by: Dmytro Lytovchenko <[email protected]>
|
|
Conflicts:
erts/emulator/beam/erl_process.c
|
|
* lukas/OTP-21.1.1/scheduler_pollset/OTP-15475:
erts: Move fds with active true behaviour to own pollset
erts: Fix lists_member_2 reduction count
erts: Allow code_model_small to be set in xcomp setting
erts: Implement delay_send using timer instead of poll
erts: Optimize driver_set_timer(0) to fire at once
erts: Optimize the inet driver multi timers for one timer
erts: Move all inet tcp CONNECTED timers to multi timer
erts: Add erts_io_notify_port_task_executed to check_io msacc state
erts: Add pre-alloc to ALLOC msacc state
erts: Make thr prgr wakeup current or sched 1
erts: Pass thread progress data where possible
|
|
|
|
There have been too many times when users have needed to
enable something through CFLAGS but forgotten to add the
'-O2 -g' flags.
|
|
OTP-15473
|
|
Added config checks for the sctp struct field:
sctp_event_subscribe.sctp_authentication_event
Also, if-def'ed the code accordingly.
If-def'ed code to handle the (non-) existence of IP_PMTUDISC_PROBE
and IPV6_PMTUDISC_PROBE for the IP and IPv6 MTU_DISCOVER options.
OTP-14831
|
|
Added config checks for the sctp struct field:
sctp_event_subscribe.sctp_sender_dry_event
Also, if-def'ed the code accordingly.
OTP-14831
|
|
* maint:
Allow disabling retpoline in interpreter loop
Add a ./configure flag for spectre mitigation
|
|
into maint
* john/erts/spectre-configure-flag-otp_20/OTP-15430/ERIERL-237:
Allow disabling retpoline in interpreter loop
Add a ./configure flag for spectre mitigation
|
|
john/erts/spectre-configure-flag-otp_20/OTP-15430/ERIERL-237
* john/erts/spectre-configure-flag/OTP-15430/ERIERL-237:
Allow disabling retpoline in interpreter loop
Add a ./configure flag for spectre mitigation
|
|
Note that the ERTS_NO_RETPOLINE macro introduced by this commit is
completely inert unless spectre-mitigation is set to 'incomplete.'
This includes when mitigation has been manually enabled through
CFLAGS, so it should be impossible for it to unintentionally
disable mitigation.
|
|
* maint:
Fix PGO configure test
|
|
|
|
* maint:
erts: Fix configure check when cross-compiling
|
|
* rickard/crypto-configure/OTP-15129:
Move configuration of crypto to crypto application from erts
|
|
* rickard/parallel-configure/OTP-14625:
Parallel configure
Remove undocumented and unused lazy configure
|
|
In order to be able to handle runtime library path in crypto
also DED parts was broken out into a macro.
|
|
|
|
Without the action-if-cross-compiling argument to AC_RUN_IFELSE the
configure steps fails with the following message when cross-compiling:
configure: error: cannot run test program while cross compiling
|
|
The use of vfork was removed in OTP-19
with the introduction of the dedicated forker process.
|
|
|
|
AC_SUBST(FPE) was accidentally deleted in 13bcae12947603.
|
|
Floating point exceptions has been disabled since 2011 on macOS
(fa0f8d2c29b) and on Linux since 2014 (c7ddafbe6dbc) because
there were unresolved stability issues.
Floating point exceptions are not disabled by default on FreeBSD,
and if OTP is compiled with gcc (as opposed to clang) floating
point exceptions will be used.
81a6adab693a introduced a bug in erts/emulator/Makefile.in which would
cause the building of OTP to fail if floating point exceptions were
enabled. The bug was not noticed because it turns out that none of our
daily build machines has floating point exceptions enabled.
Since floating point exceptions is not tested, we should not expect
them to work reliably on any platform. Therefore, turn off floating
point exceptions unconditionally in erts/configure.in. For the moment
we will keep the code in the runtime system that handles floating
point exceptions.
(This commit also fixes the bug in erts/emulator/Makefile.in, in
case floating point exceptions ever become reliable and enabled.)
https://bugs.erlang.org/browse/ERL-620
|
|
All corba applications are moved to a separate repository.
E.g. orber, ic, cosEvent, cosEventDomain, cosNotifications
cosTime, cosTransactions, cosProperty and cosFileTransfer.
|
|
and instead test for mprotect which is what is uses.
The use of MAP_NORESERVE for hipe code allocations
was removed in 8fd6e3353b094aa94e37e257ee20cd5e0e5dddcb.
|
|
into aclocal.m4 as LM_HARDWARE_ARCH
|
|
|
|
|
