path: root/lib/ssl/doc/src/ssl_distribution.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">

<chapter>
  <header>
    <copyright>
      <year>2000</year><year>2013</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      The contents of this file are subject to the Erlang Public License,
      Version 1.1, (the "License"); you may not use this file except in
      compliance with the License. You should have received a copy of the
      Erlang Public License along with this software. If not, it can be
      retrieved online at http://www.erlang.org/.
    
      Software distributed under the License is distributed on an "AS IS"
      basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
      the License for the specific language governing rights and limitations
      under the License.
    
    </legalnotice>

    <title>Using SSL for Erlang Distribution</title>
    <prepared>P Nyblom</prepared>
    <responsible></responsible>
    <docno></docno>
    <approved></approved>
    <checked></checked>
    <date>2003-04-01</date>
    <rev>B</rev>
    <file>ssl_distribution.xml</file>
  </header>
  <p>This section describes how the Erlang distribution can use 
    SSL to get extra verification and security.</p>

    <p>The Erlang distribution can in theory use almost any 
      connection-based protocol as bearer. However, a module that 
      implements the protocol-specific parts of the connection setup is 
      needed. The default distribution module is <c>inet_tcp_dist</c> 
      in the Kernel application. When starting an
      Erlang node distributed, <c>net_kernel</c> uses this module to
      set up listen ports and connections.</p>

      <p>In the SSL application, an exra distribution
      module, <c>inet_tls_dist</c>, can be used as an
      alternative. All distribution connections will use SSL and
      all participating Erlang nodes in a distributed system must use
      this distribution module.</p>

      <p>The security level depends on the parameters provided to the
      SSL connection setup. Erlang node cookies are however always
      used, as they can be used to differentiate between two different
      Erlang networks.</p>

    <p>To set up Erlang distribution over SSL:</p>

      <list type="bulleted">
      <item><em>Step 1:</em> Build boot scripts including the
      SSL application.</item>
      <item><em>Step 2:</em> Specify the distribution module for 
      <c>net_kernel</c>.</item>
      <item><em>Step 3:</em> Specify the security options and other 
      SSL options.</item>
      <item><em>Step 4:</em> Set up the environment to always use SSL.</item>
    </list>

    <p>The following sections describe these steps.</p>

  <section>
    <title>Building Boot Scripts Including the ssl Application</title>
    <p>Boot scripts are built using the <c>systools</c> utility in the
      <c>sasl</c> application. For more information on <c>systools</c>,
      see the <c>sasl</c> documentation. This is only an example of
      what can be done.</p>

      <p>The simplest boot script possible includes only the Kernel 
      and STDLIB applications. Such a script is located in the 
      <c>bin</c> directory of the Erlang distribution. The source for the 
      script is found under the Erlang installation top directory under
      <c><![CDATA[releases/<OTP version>/start_clean.rel]]></c>.</p>

      <p>Do the following:</p>
      <list type="bulleted">
	<item><p>Copy that script to another location (and preferably another 
      name).</p></item>
        <item><p>Add the applications Crypto, Public Key, and 
	SSL with their current version numbers after the 
	STDLIB application.</p></item>
      </list>

    <p>The following shows an example <c>.rel</c> file with SSL 
    added:</p>
    <code type="none">
      {release, {"OTP  APN 181 01","R15A"}, {erts, "5.9"},
      [{kernel,"2.15"},
      {stdlib,"1.18"},
      {crypto, "2.0.3"},
      {public_key, "0.12"},
      {ssl, "5.0"}
      ]}.
   </code>

   <p>The version numbers differ in your system. Whenever one of the 
   applications included in the script is upgraded, change the script.</p>

      <p>Do the following:</p>
      <list type="bulleted">
	<item><p>Build the boot script.</p>
	<p>Assuming the <c>.rel file</c> is stored in a file
	<c>start_ssl.rel</c> in the current directory, a boot script
	can be built as follows:</p></item>
      </list>
   <code type="none">
   1> systools:make_script("start_ssl",[]).    </code>

   <p>There is now a <c>start_ssl.boot</c> file in the current
   directory.</p>

   <p>Do the following:</p>
   <list type="bulleted">
     <item><p>Test the boot script. To do this, start Erlang with the
     <c>-boot</c> command-line parameter specifying this boot script
     (with its full path, but without the <c>.boot</c> suffix). In
     UNIX it can look as follows:</p></item>
   </list>
   <code type="none"><![CDATA[
$ erl -boot /home/me/ssl/start_ssl
Erlang (BEAM) emulator version 5.0
 
Eshell V5.0  (abort with ^G)
1> whereis(ssl_manager).
<0.41.0>    ]]></code>

    <p>The <c>whereis</c> function-call verifies that the SSL 
      application is started.</p>

      <p>As an alternative to building a bootscript, you can explicitly
      add the path to the SSL <c>ebin</c> directory on the command
      line. This is done with command-line option <c>-pa</c>. This
      works as the SSL application does not need to be started for the
      distribution to come up, as a clone of the SSL application is
      hooked into the Kernel application. So, as long as the
      SSL application code can be reached, the distribution starts. 
      The <c>-pa</c> method is only recommended for testing purposes.</p>

      <note><p>The clone of the SSL application must
      enable the use of the SSL code in such an early bootstage as
      needed to set up the distribution. However, this makes it
      impossible to soft upgrade the SSL application.</p></note>
  </section>

  <section>
    <title>Specifying Distribution Module for net_kernel</title>
    <p>The distribution module for SSL is named <c>inet_tls_dist</c>
      and is specified on the command line with option <c>-proto_dist</c>.
      The argument to <c>-proto_dist</c> is to be the module
      name without suffix <c>_dist</c>. So, this distribution
      module is specified with <c>-proto_dist inet_tls</c> on the
      command line.</p>

    <p>Extending the command line gives the following:</p>
    <code type="none">
$ erl -boot /home/me/ssl/start_ssl -proto_dist inet_tls    </code>

<p>For the distribution to be started, give the emulator a name as well:</p>
    <code type="none">
$ erl -boot /home/me/ssl/start_ssl -proto_dist inet_tls -sname ssl_test
Erlang (BEAM) emulator version 5.0 [source]
 
Eshell V5.0  (abort with ^G)
(ssl_test@myhost)1>     </code>

    <p>However, a node started in this way refuses to talk
      to other nodes, as no SSL parameters are supplied
      (see the next section).</p>
  </section>

  <section>
    <title>Specifying SSL Options</title>
    <p>For SSL to work, at least
    a public key and a certificate must be specified for the server
    side. In the following example, the PEM-files consist of two
    entries, the server certificate and its private key.</p>

    <p>On the <c>erl</c> command line you can specify options that the
    SSL distribution adds when creating a socket.</p>

    <p>The simplest SSL options in the following list can be specified 
    by adding the 
    prefix <c>server_</c> or <c>client_</c> to the option name:</p>
    <list type="bulleted">
      <item><c>certfile</c></item>
      <item><c>keyfile</c></item>
      <item><c>password</c></item>
      <item><c>cacertfile</c></item>
      <item><c>verify</c></item>
      <item><c>reuse_sessions</c></item>
      <item><c>secure_renegotiate</c></item>
      <item><c>depth</c></item>
      <item><c>hibernate_after</c></item>
      <item><c>ciphers</c> (use old string format)</item>
    </list>

    <p>The server can also take the options <c>dhfile</c> and
    <c>fail_if_no_peer_cert</c> (also prefixed).</p>

    <p><c>client_</c>-prefixed options are used when the distribution 
    initiates a connection to another node. <c>server_</c>-prefixed 
    options are used when accepting a connection from a remote node.</p>

    <p>More complex options, such as <c>verify_fun</c>, are currently not 
    available, but a mechanism to handle such options may be added in
    a future release.</p>

    <p>Raw socket options, such as <c>packet</c> and <c>size</c> must not 
    be specified on the command line.</p>

    <p>The command-line argument for specifying the SSL options is named
    <c>-ssl_dist_opt</c> and is to be followed by pairs of
    SSL options and their values. Argument <c>-ssl_dist_opt</c> can
    be repeated any number of times.</p>

      <p>An example command line can now look as follows
      (line breaks in the command are for readability, 
      and are not be there when typed):</p>
    <code type="none">
$ erl -boot /home/me/ssl/start_ssl -proto_dist inet_tls
  -ssl_dist_opt server_certfile "/home/me/ssl/erlserver.pem" 
  -ssl_dist_opt server_secure_renegotiate true client_secure_renegotiate true
  -sname ssl_test
Erlang (BEAM) emulator version 5.0 [source]
 
Eshell V5.0  (abort with ^G)
(ssl_test@myhost)1>     </code>
    <p>A node started in this way is fully functional, using SSL
      as the distribution protocol.</p>
  </section>

  <section>
    <title>Setting up Environment to Always Use SSL</title>
    <p>A convenient way to specify arguments to Erlang is to use environment 
      variable <c>ERL_FLAGS</c>. All the flags needed to
      use the SSL distribution can be specified in that variable and are
      then interpreted as command-line arguments for all
      subsequent invocations of Erlang.</p>

    <p>In a Unix (Bourne) shell, it can look as follows (line breaks are for
      readability, they are not to be there when typed):</p>
    <code type="none">
$ ERL_FLAGS="-boot /home/me/ssl/start_ssl -proto_dist inet_tls
  -ssl_dist_opt server_certfile /home/me/ssl/erlserver.pem
  -ssl_dist_opt server_secure_renegotiate true client_secure_renegotiate true"
$ export ERL_FLAGS
$ erl -sname ssl_test
Erlang (BEAM) emulator version 5.0 [source]
 
Eshell V5.0  (abort with ^G)
(ssl_test@myhost)1> init:get_arguments().
[{root,["/usr/local/erlang"]},
 {progname,["erl "]},
 {sname,["ssl_test"]},
 {boot,["/home/me/ssl/start_ssl"]},
 {proto_dist,["inet_tls"]},
 {ssl_dist_opt,["server_certfile","/home/me/ssl/erlserver.pem"]},
 {ssl_dist_opt,["server_secure_renegotiate","true",
                "client_secure_renegotiate","true"]
 {home,["/home/me"]}]    </code>

    <p>The <c>init:get_arguments()</c> call verifies that the correct
      arguments are supplied to the emulator.</p>
  </section>
</chapter>